[UNOFFICIAL][16.0][TREBLE] LineageOS for Motorola Moto Z2 Play (albus) - Moto Z2 Play ROMs, Kernels, Recoveries, & Other D

[UNOFFICIAL][16.0][TREBLE] LineageOS for Motorola Moto Z2 Play (albus) - Moto Z2 Play ROMs, Kernels, Recoveries, & Other D

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (P), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
Known issues:
Moto Mods Projector and Hasselblad Camera are unknown to work.
Moto Mods with Battery do not report the battery
VoLTE and VoWIFI not working
Moto Mods:
Moto Mods Projector and Hasselblad Camera are unknown to work.
All the other Moto Mods work, but Battery Mods do not report the percentage in the status bar
Instructions:
Always have a backup of the EFS partition made with TWRP stored somewhere, as you may lose IMEI. Restore it if you get 0 as IMEI when booted into the ROM.
Before installing, make sure oreo was the last stock ROM you installed. See notes below if you come from Stock Pie
Download Official TWRP from twrp.me
Flash the TWRP via fastboot
Enter TWRP, go to wipe menu and Wipe Dalvik, Cache, Data, System and Internal Storage.
In TWRP Wipe Menu, do Format Data, then reboot into recovery
Flash the latest build
Flash eventual GApps and SU addon
Reboot
Downloads:
Latest Unofficial build: AFH
Google Apps: OpenGapps
SU Addon: LineageOS Extra Downloads
Notes
TWRP
If the touchscreen doesn't work when rebooting into recovery, press the power button twice to turn off and on the screen. The touchscreen will now work just fine.
GSIs
This LineageOS build ships with Project Treble compatibility (lite VNDK), meaning you can flash a GSI as System Image from TWRP. Please don't report GSI bugs here, report them instead to the GSI's maker. A Format Data from TWRP is required after flashing a GSI in order to avoid problems.
Technical details on our Treble implementation:
This device is a community-treble device, meaning other devs before us made it compatible with Project Treble (lite VNDK), using the oem partion as a vendor. GSIs still have some problems regarding cpu frequency scaling and camera. You have been warned.
.
Coming from stock pie?
For the sake of simplicity, I said that coming from stock oreo was needed. In reality you just need to flash the oreo modem files. There's a script that does exactly that, made by @juniorpassos: https://mega.nz/file/IRxjGDjL#vkdvh4JcMy-LuWgQz4rHhgpWV80029X4ql0_zcMpVug. The script will erase your userdata and cache.
Before starting this script, make sure you have a backup of your EFS partition stored somewhere safe, outside phone's internal storage. After the backup is done, you can reboot your phone into fastboot mode and start the script. Now reboot into TWRP, go into "Wipe" menu and Format Data. Now you can reboot into the ROM. If you get 0 as IMEI, or any other problem related to RIL, go into TWRP and restore the EFS backup made previously.
Wanna help?
If you find a problem or a bug, please share a logcat with us, alongside an explanation of the problem and steps to reproduce. We won't accept bug reporting without a logcat. Collect logcat with:
Code:
adb logcat -b all > logcat.txt
You can also join our Telegram Channels:
Global: https://t.me/z2play
Ex KVT group: https://t.me/Z2PlayGSI
There's a guide made by a user to install the ROM, written in both Portuguese and English, here it is: https://telegra.ph/Como-instalar-LOs-160-How-to-install-LOs-160-08-04
Thanks
Many thanks to @marcost22 for the pair-working we are doing in this adventure, to @davidsonsjesus for his work on KVT, to @jeferson1979 for his help and teaching. Thanks to all the testers that have helped us testing this ROM.
Sources
Device tree
Vendor tree
Kernel
XDA:DevDB Information
LineageOS 16.0 Motorola Moto Z2 Play (albus), ROM for the Moto Z2 Play
Contributors
EmaMaker, marcost22, rahulsnair, @erfanoabdi @vache @kubersharma @jeferson1979
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: ALBUS_OPS27.76-12-25_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC
Version Information
Status: Stable
Current Stable Version: 16.0
Stable Release Date: 2020-09-27
Created 2020-07-31
Last Updated 2020-09-27

So how's battery? I'm not sure what does it mean:
CPU governorns have some issues. Conservative is recommended for an optimal battery life
Click to expand...
Click to collapse
Also if I run Oreo 8.1 ROM currently and never had Pie installed do I need anything to do before flashing this? Like upgrading firmware or something?

meelten said:
So how's battery? I'm not sure what does it mean:
Also if I run Oreo 8.1 ROM currently and never had Pie installed do I need anything to do before flashing this? Like upgrading firmware or something?
Click to expand...
Click to collapse
Regarding battery: it's quite good, it can get you through the day without any flaws. Since I'm doing frequent tests and I often hook up the phone to the computer, I don't have good screenshots to show you. Will edit the post eventually when I get some. In alternative, you can join the telegram groups and ask someone. We worked on the cpu scaling and governorns and an update will come for it soon.
Regarding firmware: no, you don't have need to update firmware, and updating it may actually cause some problems with RIL. It's perfect if you stay on the oreo firmware.

Changelog
2020-12-08: Cleanup and uprev kernel (3.18.113->3
18.116). Update camera blobs: fix Electronic Image Stabilization, bring back laser focus sensor, fix recording in WhatsApp., fix issues with video recording in Snap cam Fix encryption and decryption (official twrp over at twrp.me is needed for this to fully work). SeLinux is now Enforcing. Update VNDK to full enforcement. Update graphics props. This is the final build for Android Pie 9.0. We will will soon start the Q bringup, and will not be building any Pie ROM anymore, unless some critical bug is discovered: https://www.androidfilehost.com/?fid=17248734326145679504
2020-09-27: Updated Moto Mods blobs. Updated Audio and BT Blobs. Updated media profiles. Thanks to @marcost22: https://www.androidfilehost.com/?fid=8889791610682947394
2020-09-10: Updated Radio blobs and radio init scripts. Workaround for Ambient Display in Q GSIs. Remove batt_health (has been discovered useless): https://www.androidfilehost.com/?fid=8889791610682934965
2020-08-03: Fixed CPU governors. Updated init scripts. New kernel, updated to 3.18.113. Batt_health is back. Fixed offline charge. Updated perf and IOP blobs : https://www.androidfilehost.com/?fid=8889791610682905855
2020-07-29: First beta release: https://www.androidfilehost.com/?fid=8889791610682905855

I'm tempted to give it a try and probably will next weekend but as Z2P is my main phone I want to ask few things:
1. Do fingerprint gestures work?
2. Does notification LED work?
3. Does "active display" (showing notifications and time with locked screen) work?
4. Have you tried it with Magisk? I'd prefer Magisk rather than Addon SU.

meelten said:
I'm tempted to give it a try and probably will next weekend but as Z2P is my main phone I want to ask few things:
1. Do fingerprint gestures work?
2. Does notification LED work?
3. Does "active display" (showing notifications and time with locked screen) work?
4. Have you tried it with Magisk? I'd prefer Magisk rather than Addon SU.
Click to expand...
Click to collapse
1. Work
2. Work
3. The feature you are speaking about is Ambient Display, and yes, that works
4. Yes, magisk works

hi people, nobody is testing it?
i would like to try it, but i can't right now
battery work fine after cpu governors fix?
thanks

I tried today. ROM installs and boots fine but my SIM card is not detected at all (I live in Europe if it matters).
Also, encryption doesn't work. Every attempt to encrypt phone resulted in bootloop.
Can't say much more because without SIM I can't use it and had return to LOS 15.1
UPDATE: I tried restoring ESF partition as well as flashed stock modem as stated in #1 post but with no luck. Even tried install 15.1 first and then flash 16.0 on top of it (without full wipe/format) but it didn't help either. SIM is just not detected.

On-Screen Navigation Bar
I upgraded from the old Official Lineage 15.1 today. I am having a problem getting the navigation bar to show up (Back, Home, App). I search the settings and it hits "Enable on-screen nav bar" in the "Buttons" sub-menu, but when I go there, there is no option shown

Hi. I installed this rom a few days ago from Havoc based in 8.0 and I had to flash modem cause my imei was 0 in lineageos, after this i have signal normally but can't get H+ or 4G, only H. Another problem is that my whatsapp voices notes are recorded with low volume. All the other things work fine, battery, performance, active display, fingerprint and motorola gestures, all it's ok. Great rom!
I would like that the power off menu and quick settings can't be disables in the lockscreen. In third world it would be usefull haha.

Nahuel123 said:
...
Click to expand...
Click to collapse
Did you flash this modem linked in first post? I wonder what your "fastboot getvar all" shows because mine says "baseband: not found". Which is strange to me because on Oreo roms everything works. I don't know if I flashed that modem correctly.

Nahuel123 said:
Hi. I installed this rom a few days ago from Havoc based in 8.0 and I had to flash modem cause my imei was 0 in lineageos, after this i have signal normally but can't get H+ or 4G, only H. Another problem is that my whatsapp voices notes are recorded with low volume. All the other things work fine, battery, performance, active display, fingerprint and motorola gestures, all it's ok. Great rom!
I would like that the power off menu and quick settings can't be disables in the lockscreen. In third world it would be usefull haha.
Click to expand...
Click to collapse
Yeah, first issue is modem, second is audio; both things were updated and are now in testing. So keep an eye out!
And lastly, i dont think that's possible, at least on our side, it seems to be Lineage controlled
---------- Post added at 11:05 PM ---------- Previous post was at 11:02 PM ----------
meelten said:
Did you flash this modem linked in first post? I wonder what your "fastboot getvar all" shows because mine says "baseband: not found". Which is strange to me because on Oreo roms everything works. I don't know if I flashed that modem correctly.
Click to expand...
Click to collapse
There were some issues on modem on the latest release, mostly location-related; so keep an eye out for the update!

My sim card don't work even after I flashed the moden and the .EFS backup, and the device cant connect with the pc via usb when it's turned on.

How to get an on screen navigation bar
How to get an on screen navigation bar:
1. Root phone (I used the SU addon in the OP)
2. Enable navbar with the app "Navigation bar remover/activator (root)" by Conena
3. If you want to customize the navbar use "Custom Navigation Bar" by paphonb (you can reorder buttons freely in "Expirimetal tweaks")
---------- Post added at 09:55 AM ---------- Previous post was at 09:54 AM ----------
Does anyone know how i can disable the fingerprint gestures ?

Rigulel said:
How to get an on screen navigation bar:
1. Root phone (I used the SU addon in the OP)
2. Enable navbar with the app "Navigation bar remover/activator (root)" by Conena
3. If you want to customize the navbar use "Custom Navigation Bar" by paphonb (you can reorder buttons freely in "Expirimetal tweaks")
---------- Post added at 09:55 AM ---------- Previous post was at 09:54 AM ----------
Does anyone know how i can disable the fingerprint gestures ?
Click to expand...
Click to collapse
Use adb shell as su and run setprop qemu.hw.mainkeys 0

Hey there, I was about to tell a friend to give a try to this ROM instead of phhusson's AOSP v222 to see if by any chances it could solve his trouble with NFC not working.
Therefore can we have any feedback from people here about this? So does the NFC work?
Thanks by advance
And thanks @EmaMaker and others for this work!

voxit said:
Hey there, I was about to tell a friend to give a try to this ROM instead of phhusson's AOSP v222 to see if by any chances it could solve his trouble with NFC not working.
Therefore can we have any feedback from people here about this? So does the NFC work?
Thanks by advance
And thanks @EmaMaker and others for this work!
Click to expand...
Click to collapse
NFC it's not reported in the Know Issues section, hence it's a working feature

EmaMaker said:
NFC it's not reported in the Know Issues section, hence it's a working feature
Click to expand...
Click to collapse
I'm feeling dumb to ask you this, but where is the Known Issues section?

up

OK, IDK how I missed it...

Related

[ROM][OFFICIAL]LineageOS-15.1[Albus][Moto Z2 Play]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LIneageOS is a free, community built, after-market firmware distribution of Android re-branded CyanogeMod, which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is based on the Android Open Source Project and CyanogenMod with extra contributions from many people within the Android community. All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS please visit Gerrit Code Review.
Warning!!!
BackUp EFS partition before installing. .If you lose IMEI , use this backup to retrieve it in future.
Installation
First time LineageOS installation on your Moto Z2 Play:
Unlock your bootloader if you haven't done so already
Flash a custom recovery via Fastboot (64 bit TWRP is needed)
Copy Gapps (64 bit) and Lineage OS flash files to sdcard
Boot into Recovery
Format Internal Memory . I repeat Format.. (Not Wipe) (after format reboot to recovery)
Flash the LineageOS zip from SD card
Flash GApps from SD card
Reboot
Upgrading from earlier version of LineageOS :
Push the new LineageOS zip to your SD card
Boot into Recovery (64 bit TWRP)
Flash the LineageOS zip from SD card
Flash the most recent GApps (64 bit) for 8.x
Reboot
Downloads
- LineageOS : Weekly Builds
- Google Apps (arm64) : GApps
Bugs
You tell me
Reporting bugs
DO NOT report bugs if you're running a custom kernel
DO NOT report bugs if you've modifies system files
DO NOT report bugs if you've installed xposed and/or other mods
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
Code:
adb logcat > logcat.txt
Code:
adb shell dmesg > dmesg.txt
If it is a random reboot, grab kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Code:
adb shell cat /sys/fs/pstore/console-ramoops
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues or bugs reported in the lastest 5 pages of this thread. Any bug not reported in the bug report format below may be ignored.
Code:
Phone Informations
* LineageOS version
* Gapps version
What you did:
* Wipe data: y/n
* Upgrade from previous official cm build: y/n
* Restore with titanium backup: y/n
You're using (if yes write which one) :
* Task killer
* Phone cleaner / Battery enhancer apps
* Non-stock kernel
* Modified kernel settings
* Other mods
Bug info:
* Last version it worked on
* Repro steps
F.A.Q.
ROOT! ROOT! Give me root or i'll die!!! Where root is???
First of all DO NOT flash any SuperSu/SuperUser/SuperMan zip package to get root. Go to Settings>Developement Settings>Root access and select "Apps Only"
Why no nightly today?
Build failed. Check again tomorrow
When do I have to wipe data?
You must wipe data only when you're switching from another rom or migrating to Snapshot branch from Nightly and vice versa. You don't need to wipe data when you update in the same release channe (this applies to 13.0 -> 14.1 upgrades too)
Will you add <insert awesome feature here>?
I won't. If you write it, submit a commit to gerrit, where it will be reviewed.
The LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Kernel Source : Here
Device Tree: Here
XDA:DevDB Information
LineageOS, ROM for the Moto Z2 Play
Contributors
rahulsnair, vache
Source Code: https://github.com/LineageOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2018-09-17
Beta Release Date: 2018-01-13
Created 2018-01-06
Last Updated 2018-09-17

06-Jan-2017
Initial Release
13-Jan-2017
Fixed Camera
Fixed audio/headphone related issues
Tweaked haptic feedback
Downstreamed kernel to minimize bugs
Blobs updated to leaked oreo
24-Jan-2017
Fixed lag in audio playback
Fixed Vo-LTE support
Added lineage features (recording, hide navigation bar etc.. )
Fixed blue-tooth device name
Model specific init changes
27-Jan-2017
SeLinux Enforced
Implement 64 bit sensors libs
Ambient display reboot fixed
4-Feb-2017
Motorola Mod Support Added (verified battery mod , gamepad working)
Swicthed to permissive (Temporarily : TODO : fix moto mod denials)
Live display color issue fixed
Audio libs updated
Haptic feedback tweak
10-Feb-2017
Clean flash requires power source to initial boot fixed
Selinux switched to enforcing
Display color fixed
Kernel built with Clang (thanks to @Alberto97 )
Kernal Re-based to MMI-NPSS26.118-19-18
Greybus/V4l5_hal drivers updated to MMI-NPSS26.118-19-18
f2fs updated to MMI-NPSS26.118-19-18
prima updated to LA.UM.5.6.r1-06700-89xx.0
Camera blobs updated
18-Feb-2017
Running in minimal kernel
Mod driver updated
Lineage adaptive icons
Camera improvements
Selinux permissive

Reserved

Unable to boot flashed via the 64bit recovery did a clean wipe also formatted internal storage. Started to boot showed lineage os then reboots back into recovery.

Cleanser2012 said:
Unable to boot flashed via the 64bit recovery did a clean wipe also formatted internal storage. Started to boot showed lineage os then reboots back into recovery.
Click to expand...
Click to collapse
Same here
Sent from my [device_name] using XDA-Developers Legacy app

We have the same problem
Enviado desde mi Moto Z2 Play mediante Tapatalk

I pulled these logs after it rebooted back into twrp recovery

I've managed to boot in after the format and flash. But data was disabled, screen off sent a shut down signal and went directly to the recovery. I'll flash stock and try another way around. props

Those who experience reboot .. disable ambient display.

I came here to say what I'm finding, I'm using it on the bike xt1710-07, the automatic theme works using the launcher pixel2, I found it very cool, using a dark wallpaper, the theme darkens and the theme turns white, turn off the screen only in the power button of the device, the rom supports the magisk as I am using it and I have root access, as you mentioned the device does not stay reigning alone, I had to disable the display environment, it's a shame the camera does not work, in my opinion this was the that I found so far, if the camera by at least the other problems work does not affect much, I loved this rom.
---------- Post added at 04:27 PM ---------- Previous post was at 04:26 PM ----------
sorry my english because I'm from Brazil and I'm writing on google translate

carlinhossp said:
I came here to say what I'm finding, I'm using it on the bike xt1710-07, the automatic theme works using the launcher pixel2, I found it very cool, using a dark wallpaper, the theme darkens and the theme turns white, turn off the screen only in the power button of the device, the rom supports the magisk as I am using it and I have root access, as you mentioned the device does not stay reigning alone, I had to disable the display environment, it's a shame the camera does not work, in my opinion this was the that I found so far, if the camera by at least the other problems work does not affect much, I loved this rom.
---------- Post added at 04:27 PM ---------- Previous post was at 04:26 PM ----------
sorry my english because I'm from Brazil and I'm writing on google translate
Click to expand...
Click to collapse
Hey mate, could you please just backup your EFS partition and send it to me? i lost my during the format and now i have no mobile data. Thanks in advanced!!!

Thank you and good work.

13-Jan Release Note
New build has been released.
Link has been updated in the main post.
Change logs has been updated in the second post
Overview
Fixed up camera
Fixed up audio/headset related issues
Tweaked haptic feedback
Bugs left:
Ambient display needs to be turned off. (Otherwise device restarts)
Flashlight chop chop gesture doesn't work
Quick download link : here
Make sure you take EFS backup before flashing any custom rom...

just backed up stock and flashed latest build.... hooray for camera and FM Radio Ambient display still causing reboot to recovery, but I never use that feature on any of my devices so I disable it. I'll report any bugs I find and provide logcat(s) if needed.
I have the wireless charging moto mods addon. I did some looking around on the moto z (griffin) forum and found an addon to flash. I might try it after I get this build setup and backed up.
*edit* addon does not work without modding since it's looking for griffin.

I applaud you.!

I think no custom ROMs have supported MotoMod features yet. I'm so eager to try this ROM. It seems much more stable now. Good job,rahulsnair...:good:

huatz84 said:
I think no custom ROMs have supported MotoMod features yet. I'm so eager to try this ROM. It seems much more stable now. Good job,rahulsnair...:good:
Click to expand...
Click to collapse
Im this ROM, moto actions, like biometric gestures works fine.
Gesture to open camera too

About root, magisk works fine. Tested:!

huatz84 said:
I think no custom ROMs have supported MotoMod features yet. I'm so eager to try this ROM. It seems much more stable now. Good job,rahulsnair...:good:
Click to expand...
Click to collapse
Does that include the power Mods, like Turbopower?
I love custom Roms, but I can't live without my battery Mods. On the z1, that wouldn't be so bad, but z2......

bgochoa said:
Im this ROM, moto actions, like biometric gestures works fine.
Gesture to open camera too
Click to expand...
Click to collapse
Only twist to capture works. Hopefully,Motomods will be supported. I just ordered incipio power pack.
kewlzter said:
Does that include the power Mods, like Turbopower?
I love custom Roms, but I can't live without my battery Mods. On the z1, that wouldn't be so bad, but z2......
Click to expand...
Click to collapse
Yeah..there are some roms which have supported Moto Mods in griffin (Z Play).
Sent from my Moto Z2 Play using XDA Labs

[ROM][UNOFFICIAL][8.1.0][tb8703f/x/r/n] LineageOS 15.1 for Lenovo TAB 3 8 plus P8

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What works:
Calls/SMS/Mobile data
Wifi
Bluetooth
GPS
Camera
Audio
FM radio
Torchlight
USB and WLAN tethering
Broken
You tell me
Source code:
device : https://github.com/HighwayStar/android_device_lenovo_TB8703/tree/lineage-15.1
kernel: https://github.com/HighwayStar/android_kernel_lenovo_msm8953/tree/lineage-15.1-common
vendor: https://github.com/HighwayStar/android_vendor_lenovo_TB8703/tree/lineage-15.1
2018-09-26
Updated audio configs
Updated mount options for /data partition, should increase performance and prolong flash life
Added missing powerhint.xml, should improve powersave in idle mode and more performance in demanding apps.
mailru: lineage-15.1-20180926-UNOFFICIAL-TB8703.zip
gdrive: lineage-15.1-20180926-UNOFFICIAL-TB8703.zip
Previous versions:
2018-08-26
Updated kernel
Added support for exfat sd cards
mailru: lineage-15.1-20180826-UNOFFICIAL-TB8703.zip
gdrive: lineage-15.1-20180826-UNOFFICIAL-TB8703.zip
2018-08-25
Fixed long time to wakeup screen
mailru: lineage-15.1-20180825-UNOFFICIAL-TB8703.zip
gdrive: lineage-15.1-20180825-UNOFFICIAL-TB8703.zip
2018-08-24
Fixed system crash when using WiFi hotspot mode
Updated Lineage code
mailru: lineage-15.1-20180824-UNOFFICIAL-TB8703.zip
gdrive: lineage-15.1-20180824-UNOFFICIAL-TB8703.zip
2018-08-18
Fixed MAC and long time to enable Wifi
Fixed MAC and long time to enable Bluetooth
Fixed calling with BT headset
Fixed Buttons settings
Partially fixed LED
mailru: lineage-15.1-20180818-UNOFFICIAL-TB8703.zip
gdrive: lineage-15.1-20180818-UNOFFICIAL-TB8703.zip
2018-08-16
Initial release
Full sources published
mailru: lineage-15.1-20180816-UNOFFICIAL-TB8703.zip
gdrive: lineage-15.1-20180816-UNOFFICIAL-TB8703.zip
How to install
To install this you have to install TWRP using by QFIL utility, follow this instruction: https://forum.xda-developers.com/general/general/twrp-lenovo-p8-tb-8703f-tb-8703x-t3689442/post76277192
Special TWRP build
To install and boot any custom roms and to boot it after installing mods that change boot partitition like Magisk please use this TWRP:
2018-08-25
Fixed long time to wakeup screen in TWRP
Added NTFS filesystem for sdcards
mailru: twrp-tb8703-3.2.1-20180825-bootsign.img
gdrive: twrp-tb8703-3.2.1-20180825-bootsign.img
Previous version
[*] Первая версия
mailru: twrp-tb8703-3.2.1-bootsign.img
gdrive: twrp-tb8703-3.2.1-bootsign.img
This TWRP build has special function Sign boot which you have to click after install new version of ROM or mod like Magisk. It will append stock boot signature to your boot partition. This allows to boot with locked bootloader.
TWRP with Boot Sign function screenshots:
Fortunately you dont need to unlock bootloader, because not every Lenovo tab can be unlocked. Custom kernel and ROM can be runned by appending boot.sig signature extracted from stock rom to boot.img like
Code:
cat boot.img boot.sig > boot-signed.img
It still cant be loaded by fastboot, but you always can flash it from TWRP. You can get boot.sig in my repo https://github.com/HighwayStar/android_device_lenovo_TB8703/blob/cm-14.1/twrp/recovery/root/boot.sig
XDA:DevDB Information
[ROM][UNOFFICIAL][8.1.0][tb8703f/x/r/n] LineageOS 15.1 for Lenovo TAB 3 8 plus P8, ROM for the Lenovo Thinkpad Tablet
Contributors
highwaystar_ru
Source Code: https://github.com/HighwayStar/android_kernel_lenovo_msm8953/tree/lineage-15.1-common
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Based On: LineageOs
Version Information
Status: Testing
Created 2018-08-16
Last Updated 2018-09-26

You're rock, thanks. If you give for us custom kernel with overclock, the community will aprecciate. Thanks Sir for your hard work here.
---------- Post added at 02:19 PM ---------- Previous post was at 02:17 PM ----------
One bug I found on LOS 14.1, please look at topic from LOS 14.1, and you will see.

8703F
Hotspot doesn't work. I can turn it on but my computer and phone don't see the network; if I turn it on-off-on it causes the tablet to crash into a soft restart. It will then show 'Error'. There is no 5GHZ option when creating a hotspot. I posted this in the other thread aswell.
System/Buttons/Show arrow keys while typing doesn't work in landscape mode. They will appear in the middle of the navigation bar on top of the circle and will make the nav bar unusable.
I don't know if this is a feature, but in landscape mode if I swipe from the right end of the screen towards the center the status bar drops down.

boom! Legend! Thankyou SO much!

@highwaystar_ru has twrp been updated in OP?
I have twrp-tb8703-3.2.1-bootsign.img and cannot mount SD card

Awesome! Can't wait to flash this, gonna be so much better than Lenovo's bloatstock (and more up to date than my phone's LineageOS, to boot)

Lineage 15.1 updated
2018-08-18
Fixed MAC and long time to enable Wifi
Fixed MAC and long time to enable Bluetooth
Fixed calling with BT headset
Fixed Buttons settings
Partially fixed LED

Awesome! Thanks for the great effort!
LOS15.1 works perfectly:good: (18/8 version)
The only problem which I can find is gapp camera's shutter button shift down to the home button bar, half of the shutter button is hided.:fingers-crossed:

I get
"updater process ended with ERROR: 7
Error installing zip file "xxxxxxxxxx"
I was coming from the your 14.1 ROM - latest update from August. did a full wipe beforehand... made no difference.
Tried to dowload the file from both g-drive and mailru .. same result..
any ideas?

lu99ke said:
I get
"updater process ended with ERROR: 7
Error installing zip file "xxxxxxxxxx"
I was coming from the your 14.1 ROM - latest update from August. did a full wipe beforehand... made no difference.
Tried to dowload the file from both g-drive and mailru .. same result..
any ideas?
Click to expand...
Click to collapse
post /tmp/recovery.log

@lu99ke
sign boot from twrp

lineage 15.1 for lenovo yoga tab 3 plus please

I finally install Lineage OS in My Tablet. I try to install gapps version 8.1.0 ARM 64 from opengapps and then sign the boot partition after flash the gapps. System boots normally but gapps crashes constantly. Any gapps working? Or any information about how to install correctly gapps. Thanks.
**Update**
I just Wipe Data and then sign boot again. Then I configure my device and Now is Working with the Whole Google Apps and is now Android 8.1.0. Thanks for the developer for the Rom

Thanks a lot for your work on this ROM!
I've had exactly same experience with gapps crashing (MindTheGapps-8.1.0-arm64-20180223_195845.zip) as maikalex96 above. Wipe fixed the problem. Not feeling adventurous enough to try Open gapps yet.
good:
usual stuff works
WiFi 5GHz works
WiDi / Miracast, Chromecast works
Apk installations/updates are lightning fast compared to 6.0.1 stock
not so good:
bluetooth (albeit disabled) drains battery like crazy in standby - either that or andriod battery stats are not working right (WLAN, display items are not even listed)
no Dolby Atmos in LOS
some useful features removed in Oreo (google seem to be dumbing the system down) - no more WiFi band option (2.4/5), no more WiFi in standby option (on, off, charger on)
not a fan of some Oreo or LOS aesthetics
sound is not routed back to speakers after disconnecting headphones (not always)
not sure about performance, stock 6.0.1 might be a tad more responsive (touch, scrolling)
untested:
phone, lte data
sd card
That's on tb8703x.

highwaystar_ru said:
post /tmp/recovery.log
Click to expand...
Click to collapse
here it is..
*** Update****
So I just realised I hadn't updated TWRP to the new boot-signed version.
It won't let me do flash that via fastboot as it says " FAILED (remote: Partition flashing is not allowed " - I assume this is because my bootloader is not unlocked.
I did try using 'fasboot oem unlock" but that does not work.
I tried to use QFIL to flash the updated TWRP but it won't recognise the device on any port as obviously it is not going into stock recovery when - it is going into TWRP...
Any other ideas?
Any help is most appreciated - many thanks in advance.
*******Update #2*****
Thanks to WBN1 as below, all sorted and installed - many thanks!
Will let you know how it goes!
Many thanks again for all your hard work!

flash the updated twrp from within the old twrp. you need to tap on image when flashing so it can see the twrp.img file

wbn1 said:
flash the updated twrp from withing the old twrp. you need to tap on image when flashing so it can see the twrp.img file
Click to expand...
Click to collapse
Doh!! Lol.. I did try doing it through TWRP but didn't select image as you say!! What a doofus I am !!
Thankyou soooo much!!

Hey there, great ROM! Everything works good here. I only have one question, not directly about the ROM itself... but does anyone know if there is a version of the LOS 14.1 Trebuchet Launcher for using under LOS 15.1 ? I realy hate that new Launcher!

@highwaystar_ru i will try 3 things if i find some free time and sorry i didn't jump sooner on board.
1. Port AOSP Extended to this beauty https://www.aospextended.com/
2. Try to get an official xda forum for this tablet
3. Help you out with PR's in developing.
Great job you have done so far kudos mate.

Congratulations on the job.
any way to use otg and power at the same time? want to use the tablet in the car you need to have the power connected as well as the easycam with the recoil camera
thanks a lot

[UNOFFICIAL] LineageOS 16.0 for ZTE Axon 7

Some features of LineageOS are missing, but they will be merged in future builds.
Some features may or may not work, sometimes also differently. Feel free to ask
any question.

UwU neat p finally

Nice.But its unclear for me...is gapps inbuild android 9 or we still need gappas package? And we can also use b12 0 bootstack from Nfound,correct?

Predatorhaze said:
Nice.But its unclear for me...is gapps inbuild android 9 or we still need gappas package? And we can also use b12 0 bootstack from Nfound,correct?
Click to expand...
Click to collapse
Read the instructions, they are there for a reason.

OrdenKrieger said:
Read the instructions, they are there for a reason.
Click to expand...
Click to collapse
Los 15 is abandoned I assume?
And 16 besides nfc and volte is functional?
Thanks for contributing.

wow. It is all happening very fast.
Thanks

OrdenKrieger said:
Read the instructions, they are there for a reason.
Click to expand...
Click to collapse
lmao,i did.There is nothing mentioned we can use nfound bootstack and it says Gapps is optionally,it doesnt say gapps is inbuild. So what do you mean with optionally? I just ask this so people are not confused,and i am one of them that is confused. OPS in threads can be a mess,or have things missed that can be important

Predatorhaze said:
lmao,i did.There is nothing mentioned we can use nfound bootstack and it says Gapps is optionally,it doesnt say gapps is inbuild. So what do you mean with optionally? I just ask this so people are not confused,and i am one of them that is confused. OPS in threads can be a mess,or have things missed that can be important.You also say its optional to wipe system data cache if come from other rom,but in fact its REQUIRED to wipe system data if you come from other rom
Click to expand...
Click to collapse
GApps is always optional because some people want them and some don't. If you read carefully, on LOS 15.1 is the same.

I have heard Android Pie got GAPPS inbuild and i believe that because google dont want microg users.So its not true...

Predatorhaze said:
lmao,i did.There is nothing mentioned we can use nfound bootstack and it says Gapps is optionally,it doesnt say gapps is inbuild. So what do you mean with optionally? I just ask this so people are not confused,and i am one of them that is confused. OPS in threads can be a mess,or have things missed that can be important
Click to expand...
Click to collapse
Why should I mention other stuff if I already provide a working bootstack. Why would I give a download link for Gapps and add the the optionally tag, if they would be build in.

thnx @OrdenKrieger and all others involved :good:
Nice build - working smooth, no lag
DT2W ok
Used bitgapps as a starter
At last NO echo and incall volume adjustable
FP working
Hotspot OK
camera pics ok, recording crashes when saving - on both pics and video lag on movement
usb preferences work
afaik there is no way in settings to reverse softkeys so i used mine : https://androidfilehost.com/?fid=3700668719832237510 (be sure to be rooted and mount system/vendor)
Notifications work - on lockscreen and leds ok
EDIT : after testing a bit, definitely more heating and i mean a lot, more cpu load (f.e. as on the PPR1 img )..... could not stabilize temp on cpu 92C ! Only after applying powersave in EXKM...definitely something to look into (only Wifi on, no BT, no specific apps running....only the basic stuff to test your build )
EDIT2 : fast charging way more heat on battery - also battery drain too fast even with no cpu load
Will test further

Has anyone tried recording a video using the camera on a clean flash? Does the camera app freeze or crash?

2000impreza said:
Has anyone tried recording a video using the camera on a clean flash? Does the camera app freeze or crash?
Click to expand...
Click to collapse
yep, tried recording now and crashes when saving. Also lag on movement.

I try to flash but brick.
I download the bootloader and modem and Twrp and install them.
TWRP from OP did not see vendor Partition.
After flashing the Rom, no Twrp booting, no System booting...just fastboot working.

Hellsbend said:
I try to flash but brick.
I download the bootloader and modem and Twrp and install them.
TWRP from OP did not see vendor Partition.
After flashing the Rom, no Twrp booting, no System booting...just fastboot working.
Click to expand...
Click to collapse
So, the OP says "FOR NOW THIS BUILD ONLY WORKS ON DEVICES WITH A VENDOR Partition". Did your device have a vendor partition before flashing this one?

ttkian said:
So, the OP says "FOR NOW THIS BUILD ONLY WORKS ON DEVICES WITH A VENDOR Partition". Did your device have a vendor partition before flashing this one?
Click to expand...
Click to collapse
Yes of course, I was running ray steffs LineageOS 16 Treble bevor

Hellsbend said:
Yes of course, I was running ray steffs LineageOS 16 Treble bevor
Click to expand...
Click to collapse
Hi mate!
You shouldnt have used another BL nor twrp if you were on Nfounds and twrp3.2.18.Just flashed this rom and rebooted would have been fine.
Try to revert back to where you came from, at least flash his twrp3.2.18 and do a restore if you can.

raystef66 said:
Hi mate!
You shouldnt have used another BL nor twrp if you were on Nfounds and twrp3.2.18.Just flashed this rom and rebooted would have been fine.
Try to revert back to where you came from, at least flash his twrp3.2.18 and do a restore if you can.
Click to expand...
Click to collapse
Thank you very much, I am on the other LineageOS again.
Flashing Nfounds Twrp through fastboot, than O Bootstack again and I could restore my backup
Maybe they should point on that in the OP here.
I will try again in a minute and report back.
Thank you again!
---------- Post added at 07:26 PM ---------- Previous post was at 06:35 PM ----------
raystef66 said:
Hi mate!
You shouldnt have used another BL nor twrp if you were on Nfounds and twrp3.2.18.Just flashed this rom and rebooted would have been fine.
Try to revert back to where you came from, at least flash his twrp3.2.18 and do a restore if you can.
Click to expand...
Click to collapse
That work's just fine.
I just tried this new build now, but it's just the same as the build you posted earlier today.
The only difference in this build....
Device information now shows Axon7 U
Same small bugs as in the other LineageOS 16 GSI plus wifi bit bugy
Signature spoofing is broken
Not worth it jet setting it up all new again.
I went back to my backup again.
Thank you again.
Edit
Of course, it's easier to flash because Post 1,2 and 3 are "included" now.
So it's quicker to flash.

Hellsbend said:
Thank you very much, I am on the other LineageOS again.
Flashing Nfounds Twrp through fastboot, than O Bootstack again and I could restore my backup
Maybe they should point on that in the OP here.
I will try again in a minute and report back.
Thank you again!
---------- Post added at 07:26 PM ---------- Previous post was at 06:35 PM ----------
That work's just fine.
I just tried this new build now, but it's just the same as the build you posted earlier today.
The only difference in this build....
Device information now shows Axon7 U
Same small bugs as in the other LineageOS 16 GSI plus wifi bit bugy
Signature spoofing is broken
Not worth it jet setting it up all new again.
I went back to my backup again.
Thank you again.
Click to expand...
Click to collapse
Not quite. Mine was derived from Redmi Note 4. It looks the same for sure but devs have done some adjustments as to ECHO, dt2w working, notifications, ....
BUT my LOS16 build had no heating, nice CPU load and no battery drain and no heating when charging at all but had the annoying echo as we know it on other gsi builds and no dt2w, no notifications working on lockscreen, no led...
So there are definitely pros from this build and pros from mine.
Hope they can manage heating.
Also back on AEX as the heating (in my case) was too heavy. Dont want to ruin anything now

[discontinued][ROM][10.0][UNOFFICIAL]Resurrection Remix v8.6.x [MotoZ2Play][Albus]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix Q
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to, the LineageOS team, Omni team , SlimRoms and of course to all the supporters.
Particularity to work the gestures in digital, thanks @kontemp
Do the same as in the video, in the initial setup
Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Download the latest Resurrection Remix Rom & the latest GApps package
Boot into recovery
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
Flash ResurrectionRemix Rom
Flash Google Apps package(Optional)
Flash Magisk Root(Optional)
First boot may take up to 10 minutes.
Stock ROM required
ROM Download
GApps
Resurrection Remix Source
Device Source
Kernel Source
XDA Developers
LineageOs Team
Omni Team
And Of Course To All The Supporters, Donators And Users
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
After downloading the Catlog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
You can also join our Telegram Channels:
Global: https://t.me/z2play
Moto Z2 Play Custom ROMs group: https://t.me/Z2PlayGSI
XDAevDB Information
ResurrectionRemix Q for Z2 Play, ROM for the Motorola Z2 Play
Contributors
HeltonMax , jeangraff30
Source Code: https://github.com/ResurrectionRemix
ROM OS Version: Android 10
ROM Kernel: Linux 3.18.xx
ROM Firmware Required: ALBUS_PPS29.133-30_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
Version Information
Status: Stable
Created 2021-01-30
Last Updated 2021-02-08

Script for instaling Stock ROM

Interesting. Any known issues?

I was also interested and would like to know if there are any bugs.

gatsu777 said:
I was also interested and would like to know if there are any bugs.
Click to expand...
Click to collapse
I posted it because I didn't see any bugs, but if you show up with something you can help me fix it

HeltonMax said:
I posted it because I didn't see any bugs, but if you show up with something you can help me fix it
Click to expand...
Click to collapse
I will test soon! I will definitely report any bugs that I notice, friend. Thank you for sharing this rom with us!

So is flashing stock pie required before installing this? Will not work from oreo?

meelten said:
So is flashing stock pie required before installing this? Will not work from oreo?
Click to expand...
Click to collapse
Yes, that's why it says "Firmware required: ALBUS_PPS29.133-30 " AKA stock pie

I'm testing the rom and I'm finding it incredible. The only problem I found is that the fingerprint sensor gestures are not working

JBL Mod doesn't work, unfortunately...
Despite of that - rom is great, customization level incredible. Battery consumption low, SE Linux restrictive, security update 01.2021. Nicely done!

This looks really promising, I'll probably try it out. But I have a few questions:
1) Does encryption work?
2) As @gatsu777 mentioned, is it possible to use one-button navigation? I mean, does it come with Moto Actions at all? I know Android 10 has gesture navigation, but I'm really used to one-button nav. Also the lack of Fast torch and Quick capture would be kinda bummer.
3) Does the Always on Display (Peek display) work?
4) Do battery mods work? Can I configure it to use the efficiency mode?
5) Not a deal-breaker, but what about FM radio?
I assume basic features like bluetooth, dual SIM, USB connection, Turbo power etc. work just fine.
Thanks.

@Razemix :
1) the option is present (Security options -> Use encryption), but I didn't use it. The system is decrypted after first boot - you will have to try it on your own;
2) yes (in Moto Actions), but it needs some additional configuration - for example when I set "swipe right" -> "last app" after swiping I got all last apps On the other hand "single tap" -> "screen on/off" works just fine. Fast torch and Quick capture are present and working - if you mean those two standard Moto Actions;
3) AoD works - after moving the phone or waving a hand over it;
4) haven't tried. JBL Snap unfortunately doesn't work, even tried two different players - the issue is somewhere in the system itself;
5) FM radio works- after plugging some cable headphones of course;
6) bluetooth OK, USB connection OK (setting default connection also), dual SIM haven't check - don't have second sim card.
It looks very, very good - for me only this JBL issue needs some correction.
Congratulations, @HeltonMax !

@kontemp, how did you get the gestures on the impression sensor? I called and configured the actions there in moto actions, basically: start, back and recent, but the sensor does not respond, I even disabled the fingerprint unlocking and even then it was not.

Well, hard to say exactly how...
First of all I've used installer-pie.zip from second post above (option: "2-Installer-Complete.bat"), then formatted twice in twrp to remove encryption, then deleted everything in twrp (@marcost22, thanks for the advice!). This way I've achieved total whipe-out of old data and installed fresh stock Pie.
Second: during first startup I've disabled fingerprint at the very beginning (it can be done by choosing fingerprint+pin, then in second step choosing skip - and this way the procedure of setting fingerprint can be skipped without setting any initial data).
That's it... But this functionality acts a bit weird - like I wrote above not every "move" on fingeprint sensor is recognized correctly. Let's hope @HeltonMax will release another version with some corrections
Last thing - I use version XT1710-09, if it matters for the sake of firmware used in this rom...
Good luck!

@kontemp your explanation was very clear, friend! As you said it is not working perfectly, I will be satisfied with the gestures on the screen and use the unlock by fingerprint + pin. This rom is so perfect that I will really continue with it. Lots of configuration options, long battery life, and being able to them all with a black theme due to Android 10 is really cool. Thank you for your explanation and congratulations to @HeltonMax for the excellent work!

Hello guys, I just saw that the post is very busy lol thanks for reporting these problems and if you can send me logs (adb logcat -b all> logcat.txt) it helps me a lot it can be right here in the post or if you prefer you can me mark in the global group @ z2play or @ Z2PlayGSI that I will try to correct these problems

System encryption doesn't work. Phone reboots and then gets stuck forever on "Encrypting" screen with "time remained 00:00". After forced restart system is unaccessible.
As for fingerprint gestures in order to set actions Back, Recent Apps and Home one need first disable Navigation bar in: Resurrection tools --> System --> Buttons. Otherwise these actions are not recognizable.

hi guys,i've installed the rom, but no signal from network cell... some fix?
update: Fixed, i had to reinstall the android 9 and go back to RR.
SOMEONE KNOW HOW TO DISABLE THE PROXIMITY SENSOR??????

Rocale said:
hi guys,i've installed the rom, but no signal from network cell... some fix?
update: Fixed, i had to reinstall the android 9 and go back to RR.
SOMEONE KNOW HOW TO DISABLE THE PROXIMITY SENSOR??????
Click to expand...
Click to collapse
Another Problem guys, my battery dont want to charger anymore, it dont recognized the charger, i already try to reinstall the stock rom and nothing, the problem continues i think its soft brick, anyone can help? ty

New build available
RROS-Q-8.6.6-20210208-albus-Unofficial.zip
Fixed most Moto Mods
Full TV motomod support will be added soon
As I have no motomod to know if it was fixed, so I need to be told if it worked or not

[ROM][UNOFFICIAL][11][lavender] LineageOS 18.1

LineageOS 18.1 MicroG
Release date: 31/01/'21
Changelog:
Initial build
Traffic indicator moved to the right side
Removed black QS status bar background
Something else
Notes:
MicroG not included (but signature spoofing available, only for MicroG!). Use NanoDroid package if you want.
4.4 EAS with another energy model
Oldcam blobs
IORap enabled
QS 3x3
Download: SourceForge | MEGA

The rom goes very fast, the only thing that is really annoying is that when making or receiving calls the call interface does not appear, is there any way to solve this problem?

WOLFLIFEX said:
The rom goes very fast, the only thing that is really annoying is that when making or receiving calls the call interface does not appear, is there any way to solve this problem?
Click to expand...
Click to collapse
* I am not responsible for what may happen to your device, it is simply a solution that worked for me *
I found a solution for this problem the problem was in the NikGApps the shortest solution is:
1
Flash the rom first then reboot
2
Boot up, set the device normally and turn it off
3
Start recovey and flash NikGApps ( preferably the latest Canary version:
https://sourceforge.net/projects/nikgapps/files/Canary-Releases/NikGapps-R/03-Feb-2021/ )
4
Reboot.

LineageOS 18.1 MicroG
Release date: 14/02/'21
Changelog:
IORap selinux denials fixed
AOSP Surfaceflinger used
Fluence recording enabled
Other changes
Notes:
MicroG not included (but signature spoofing available, only for MicroG!). Use NanoDroid package if you want.
4.4 EAS with another energy model
Oldcam blobs
IORap enabled
QS panel 3x3, 3x2 when there is not enough space on the screen
Thanks:
@VerpaPhallus & @projectfluid for his device tree & kernel
Download: MEGA | IPFS

I'm currently using official 17.1 lineage OS can i dirty flash this ROM to change to 18.1 Lineage OS and is it stable for daily driver? Thanks in Advance

Babloo1989 said:
I'm currently using official 17.1 lineage OS can i dirty flash this ROM to change to 18.1 Lineage OS and is it stable for daily driver? Thanks in Advance
Click to expand...
Click to collapse
I recommend you to make a clean install, but you can try dirty. As for stability: almost everything is stable, but I would not recommend it if stability is critical.

ElXreno said:
What's working:
Everything (if it's not true - tell me)
Click to expand...
Click to collapse
So, everyone writes that even if the ROM has easily discoverable bugs, BUT, how stable is this ROM? I'm trying to find a good one for a daily driver that won't let me down in an emergency but so far it seems that all the ones I've seen are either a beta or have obvious bugs even though they're called "official" The only one I would potentially end up on is MIUI.

Can it be used as daily Driver?

Netflix and other apps thar block rooted phones are working fine?

Hi, I was using LOS 17.1 for MicroG without any issues but recently upgraded to LOS18.1 for MicroG (downloaded from lineage.microg.org and verified the download). Everything works well except for the camera. Out of the box camera app freezes frequently and then I tried Open Camera and a another camera app. Open Camera is a bit stable but still freezes regularly. Problem is worse when the camera app is being called by other apps.
I note that this has been reported in LOS forum but wondering whether there is a quick work around for this problem.
Many thanks.

evil-google said:
Hi, I was using LOS 17.1 for MicroG without any issues but recently upgraded to LOS18.1 for MicroG (downloaded from lineage.microg.org and verified the download). Everything works well except for the camera. Out of the box camera app freezes frequently and then I tried Open Camera and a another camera app. Open Camera is a bit stable but still freezes regularly. Problem is worse when the camera app is being called by other apps.
I note that this has been reported in LOS forum but wondering whether there is a quick work around for this problem.
Many thanks.
Click to expand...
Click to collapse
Hi, actually this is the wrong thread to post it.
But your solution is to replace new cam blobs with oldcam blobs and flash a kernel that is made for oldcam blobs.
I am attaching the oldcam blobs file for los that can be flashed through recovery. But note that you must change the kernel afterwards that supports oldcam. Otherwise camera will not work at all.

Walden0 said:
Hi, actually this is the wrong thread to post it.
But your solution is to replace new cam blobs with oldcam blobs and flash a kernel that is made for oldcam blobs.
I am attaching the oldcam blobs file for los that can be flashed through recovery. But note that you must change the kernel afterwards that supports oldcam. Otherwise camera will not work at all.
Click to expand...
Click to collapse
Thanks very much for the response. From what you are saying, I feel it may be easier to just downgrade to LOS17.1 which I was using before? I guess the other option I have is to wait for the next update to see whether the issue will be fixed in that release.
Thanks for your suggestion and clarification.

evil-google said:
Thanks very much for the response. From what you are saying, I feel it may be easier to just downgrade to LOS17.1 which I was using before? I guess the other option I have is to wait for the next update to see whether the issue will be fixed in that release.
Thanks for your suggestion and clarification.
Click to expand...
Click to collapse
i am also using los Q because i find it the most stable one. I m using loscam patch in Q as well for better video quality although.
And the camera issue wont get fixed until and unless someone takes over the development of los. currently it has no maintainer and tge builds we get are automated with los source side changes, not device side changes.

Walden0 said:
Hi, actually this is the wrong thread to post it.
But your solution is to replace new cam blobs with oldcam blobs and flash a kernel that is made for oldcam blobs.
I am attaching the oldcam blobs file for los that can be flashed through recovery. But note that you must change the kernel afterwards that supports oldcam. Otherwise camera will not work at all.
Click to expand...
Click to collapse
@Walden0, I thought I might give your suggestion a try before downgrading to 17.1 version. Can you please clarify the following?
1. To add the old camera blob, I could install this zip via Yellowfox Recovery?
2. How can I find out which kernel will support this oldcam blob?
Many thanks.

I have never heard of yellowfox recovery but if its based on twrp then most likely it should be able to flash the zip. (maybe you mean orangefox, if yes then you can flash)
The kernel should have "oldcam" or "old" in its name.

Walden0 said:
I have never heard of yellowfox recovery
Click to expand...
Click to collapse
Just being color blind!!...of course, it is Orange Fox Recovery!!
Interestingly, after I did my post, I just opened Settings->Apps->Camera and pressed 'force stop'. Then I started Open Camera which is what I normally use and so far it appears to be behaving OK. I tried a few still shots and one or two short videos - no freezing as yet but it is too early to know. I will keep testing over the next couple of days and see how it goes.
Thanks for your prompt response.

Just to report that the work around by disabling the Camera app so far have fixed the problem.
Any one who has the same problem may want to try out the following steps;
1. Go to Settings->Apps->Camera->Force Stop
2. Then use an installed app such as Open Camera
Note this is not a permanent solution but a work around and this has to be done each time the phone is rebooted.
EDIT: updated to 6 Dec 21 version and the camera behaves even worse than with the initial install! The above fix does not work anymore although it worked most of the time with the November update.

This ROM was abandoned, pitty, much more polished than official https://forum.xda-developers.com/t/...8-1-for-redmi-note-7-lavender.4381893/page-10.
But both suffer from the same issue: no Mass Storage Gadget so that UMS can work to make memory as USB drive.

Database Develop

welcome