I tried to install mokee os in my nubia red magic nx609j
but while flashing twrp recovery it always showed an error
target didn't report max-download-size
So when I searched online someone mentioned to perform
fastboot erase recovery
After I did that My phone is stuck at the red magic logo screen
when i reboot to recovery mode it shows Your device is corrupt. It can't be trusted and may not work properly
mine is a chinese version
Someone please help me ?????
Try stock rom...
Using fastboot commands
Did you find any solution?
gseinstein said:
I tried to install mokee os in my nubia red magic nx609j
but while flashing twrp recovery it always showed an error
target didn't report max-download-size
So when I searched online someone mentioned to perform
fastboot erase recovery
After I did that My phone is stuck at the red magic logo screen
when i reboot to recovery mode it shows Your device is corrupt. It can't be trusted and may not work properly
mine is a chinese version
Someone please help me ?????
Click to expand...
Click to collapse
Did you find any solution?
FIrst of all the op did some dumb stuff,you should not erase the recovery unless you will flash it again right away.
If you did not erase the bootloader then you can flash it from it,if not then try contacting nubia asking for the recovery tool,it is not hard to fix this problem but if you do not know what/how to,then simply ask nubia for help and wait.
Related
My phone is in a boot loop after a friend of mine tried to modify it and managed to install a wrong ROM. I can access bootloader, but not the usual HBOOT, my bootloader looks like this: (Because it's my first post I cannot put a link here, but maybe I can in the comments)
Recovery mode does nothing, it simply reboots the phone and the cycle begins. Fastboot mode is working, I can give commands through cmd, but not all commands work. For example i can flash boot boot.img, but when flash recovery recovery.img it says "partition 'recovery' not support flash", erase doesn't work at all, getvar all returns this....:
(Because it's my first post I cannot put a link here, but maybe I can in the comments)
ADB not working and when Fastboot devices it writes a random serial(0123456789AB). Something isn't good and that's why I suppose this isn't just a Soft-Brick.
Please help, I don't know what to do, can we make it work? :crying:
Thanks in advance!
Same exact thing happened to me yesterday and I'm still stuck with a bricked phone... Have you found any solution ? thx
HTC desire 626g+ soft brick
http://forum.xda-developers.com/desire-626/help/fix-htc-desire-626g-update-command-t3243510
This is the perfect solution.
if you cant install through cwm i could find a link which i used to lash the phone to official update
Hello, today I tried to install a custom rom on my xiaomi mi5x, so I unloocked the bootloader and installed twrp, than I installed the android one rom .The problem was that I had to verify my gmail because it got locked, so I looked up a way to bypass that lock. I followed a youtube video on how to bypass that lock on android one, and now my phone has the following issue:
After booting I only see the MI logo for about a second, than it goes into black screen, same thing happens when I try to boot to recovery.
The only thing that works is fastboot.
Please help me!
Go into fastboot and write following command:
fastboot boot twrp.img
Click to expand...
Click to collapse
You will enter a recovery mode. There you could try a factory reset or flash a new ROM.\
If this wont` help, you could flash a new ROM via fastboot also.
SoNhater said:
Go into fastboot and write following command:
You will enter a recovery mode. There you could try a factory reset or flash a new ROM.\
If this wont` help, you could flash a new ROM via fastboot also.
Click to expand...
Click to collapse
hi sir, i am facing also the same problem. and in my case every time i tried that code here is the output
FAILED (remote: unlock device to use this command)
i know that i already unlocked this before.
I would recommend that you flash the official firmware (fastboot version). Please follow the instructions here http://en.miui.com/a-234.html.
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Any body can help me pls. My mi5x device is now on black secreen. Not openning..
it became after load orijinal rom onto oxygen boot.
Any body can help me pls
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
eman78 said:
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Any body can help me pls. My mi5x device is now on black secreen. Not openning..
it became after load orijinal rom onto oxygen boot.
Any body can help me pls
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Click to expand...
Click to collapse
Have you find a solution sir ?
I already have tried to flash in EDL mode but when the flashing is done the phone did not reboot, plugged in the charger, and connected to the computer only received
qualcomm Hs-usb Diagnostics 900e
I have a Red Magic 3 and im having issues.
Its in fastboot but when i go to boot to recovery it just goes to fast boot. i got to boot it to android and the same thing. Fastboot i can see it with fastboot devices but i cant in adb devices. When i plug it in with fastboot its not in device manager but when i put it into EDL mode it shows in device manager. Tried putting twrp on it and it just goes back to fastboot and relocks the bootloader. I used the recovery tool and its giving me this error.
Any idea on what could be doing this? Or how i can fix this?
Wont let me post a link to a picture. But its saying reset EDL mode and download failed. I got my firewalls all disabled. Running windows 10 pro.
Help me please
Hello, I make this post to tell what happened to me and not happen to anyone else, it turns out that I wanted to install a GSI room and instead of accessing it from the fastboot I decided to do it through the recovery of orenage fox, flash the image in the super partition (systen, vendor .... ) after that, not only did not turn on my phone but I got the following error in the recovery "unable to update logical partition /system root" and the same with the vendor ..., I switched to twrp and the same, finally I entered fastboot to try to flash the stock room and failure and now my phone does not enter fastboot or recovery, and when you turn it on it turns off immediately.
Will this problem be solved in the technical center?
Thanks in advance.
Hi i have a model XT1921-5. It got stuck in the logo screen and couldnt boot into recovery so i tried a rescue with the RSA, it detected the phone in fastboot and found the firmware but failed flashing it. Now it only boots into fastboot.
When flashing the firmware manually only gpt.bin fails but the phone is still stuck in fastboot (failed to validate hab image - failed to validate boot image. same with recovery image). I tried everything i could but nothing worked out.
I think my only "chance" is to try a blankflash. The problem is that my bootloader is locked (never unlocked) so i cant do fastboot oem edl, i cant find anything about test points for this model.. So im looking for a way to maybe hard brick the phone to force it boot into EDL mode and try the blankflash. Unless there's a way to set the OEM unlock option via fastboot..
I appreciate any help.
Thanks in advance.
I was able to put my phone on QDL mode via test point.
Now i tried to flash the blankflash but it throws the error "XML (0 bytes) not validated"..
Does anyone knows what this error means? If is a version mismatch then i cant find a newer version of this blankflash..
Any help is always appreciated.
For anyone interested this is the test point you need to short to boot into QDL mode