So I got a Huawei P40 Pro Plus and I used by mistake my software files for P40 Pro. The Pro+ is now stuck and restarts every 2~3 minutes so I don't have enough time to download another version and repair it. I tried with system recovery on HiSuite as suggested in another thread but to no success. I wanted to ask if anyone knows where I can get the Huawei P40 Pro Plus stock firmware (ROM) so that I can flash it. All the ones I find don't have a dload file directory and are missing the SYSTEM.img file (instead there is this weird SUPER.img file).
Thank you in advance
I have the same problem, only on the contrary, I installed firmware from P40 Pro + on my P40 Pro. I am also looking for a solution to the problem, but unsuccessfully so far.
---------- Post added at 08:53 PM ---------- Previous post was at 08:44 PM ----------
Ashacreed said:
So I got a Huawei P40 Pro Plus and I used by mistake my software files for P40 Pro. The Pro+ is now stuck and restarts every 2~3 minutes so I don't have enough time to download another version and repair it. I tried with system recovery on HiSuite as suggested in another thread but to no success. I wanted to ask if anyone knows where I can get the Huawei P40 Pro Plus stock firmware (ROM) so that I can flash it. All the ones I find don't have a dload file directory and are missing the SYSTEM.img file (instead there is this weird SUPER.img file).
Thank you in advance
Click to expand...
Click to collapse
Try to restore via FASTBOOT according to this instruction: https://github.com/ProfessorJTJ/HISuite-Proxy/wiki/System-Recovery-Rom-Instruction-(-Soft-Bricked-)
only you need the correct cust and preload files for your region.
Did the method work for anyone as I am facing the similar behavior
loser said:
Did the method work for anyone as I am facing the similar behavior
Click to expand...
Click to collapse
it worked for the person who posted it but not for me sadly. I bought the MRT software key and it just arrived seconds ago and I will try to repair it today or tomorrow. I wish you luck my dude sadly I don't know how to help. Can you amybe give more information
Would be interesting to know what exactly was done - I am struggling to get the firmware files placed on the right directory for Hisuite to detect and repair the phone . It keeps indicating firmware package files are missing .The background is I went from 1.56 to 1.31 and it has been a constant boot loop since then . Very expensive paperweight at the moment ,
loser said:
Would be interesting to know what exactly was done - I am struggling to get the firmware files placed on the right directory for Hisuite to detect and repair the phone . It keeps indicating firmware package files are missing .The background is I went from 1.56 to 1.31 and it has been a constant boot loop since then . Very expensive paperweight at the moment ,
Click to expand...
Click to collapse
You may be substituting invalid links in hisuite.proxy
You might be right . This is what I followed >
1. Prerequisites- OK
2.Full OTA -Installation Instructions :
You need to find the matching firmwares and link to them in the application.
The above is where I am stuck - how to link and what does ut even mean . I have got the firmware files downloaded , seems like the locked bootloader does not allow to go forward .
Any ideas ?
KINGZ_ said:
You may be substituting invalid links in hisuite.proxy
Click to expand...
Click to collapse
Remember-I am in a bootloop, cannot use hisuite proxy. I have actually downgraded using Hisuite Proxy so that works just fine .
Did you have any luck with the MRTKey >?
---------- Post added at 11:03 AM ---------- Previous post was at 10:27 AM ----------
Ashacreed said:
it worked for the person who posted it but not for me sadly. I bought the MRT software key and it just arrived seconds ago and I will try to repair it today or tomorrow. I wish you luck my dude sadly I don't know how to help. Can you amybe give more information
Click to expand...
Click to collapse
Could you advise what was done ?
Latest update - upgraded to 1.57 by Hisuite Recovery. However the bootloop issue is still not fixed. IMEI is unknown and Camera has become upside down. I have very little chance to get support in my country from the service center where they refuse to support imported models and no option to send to UAE from where the model is from . Any tips will be highly appreciated.
loser said:
Latest update - upgraded to 1.57 by Hisuite Recovery. However the bootloop issue is still not fixed. IMEI is unknown and Camera has become upside down. I have very little chance to get support in my country from the service center where they refuse to support imported models and no option to send to UAE from where the model is from . Any tips will be highly appreciated.
Click to expand...
Click to collapse
You will need to find out using fastboot which version is current on your device, and then use the dload firmware for your region.
To find out how to get the latest firmware information, check Fastboot for the OEM information. PLEASE see post #253 for instructions if needed. Then follow the instructions for recovery via fastboot.
(bootloader) :ELS-N39 10.1.0.157(C185E2R1P1)
OKAY [ 0.004s]
finished. total time: 0.005s
ELS-LGRP4-OVS 10.1.0.157
ELS-N39-CUSTC1851B2 (10.1.0.2)
ELS-N39-PRELOADC185R41B1 (10.1.0.1)
Tried with C185 firmware - recovery fails at 89%. Then the same bootloop continues with the above version ( moved up from the problematic 1.31. Now trying with 1.62 which is an approved firmware .Fingers crossed.
loser said:
ELS-LGRP4-OVS 10.1.0.157
ELS-N39-CUSTC1851B2 (10.1.0.2)
ELS-N39-PRELOADC185R41B1 (10.1.0.1)
Click to expand...
Click to collapse
yes, only if you have p40 pro +, you need a firmware database for p40 +. in my opinion for p40 + this is ELS-LGRP6-OVS
and I can't tell you exactly which PRELOAD file is right for you as there are four of them.
if you just have p40 pro, then cust & preload look for ELS-N29 and firmware ELS-LGRP4-OVS base.
loser said:
Remember-I am in a bootloop, cannot use hisuite proxy. I have actually downgraded using Hisuite Proxy so that works just fine .
Did you have any luck with the MRTKey >?
---------- Post added at 11:03 AM ---------- Previous post was at 10:27 AM ----------
Could you advise what was done ?
Click to expand...
Click to collapse
So far I have tried the MRT Key but it gives me failure when trying to establish a USB connection while the phone is in Fastboot mode. I am trying to find how to fix it right now and I hope it will work. I have tried Hisuite proxy before with versions 156, 144 and 132 but nothing worked for me so I will keep trying with fastbooting and the Key. Sadly I cannot say if it will be successful and if you should buy it for yourself. I found a tutorial on YouTube how to use it but that failure mentioned earlier is in the way and the recovery never gets past 5%.
KINGZ_ said:
yes, only if you have p40 pro +, you need a firmware database for p40 +. in my opinion for p40 + this is ELS-LGRP6-OVS
and I can't tell you exactly which PRELOAD file is right for you as there are four of them.
if you just have p40 pro, then cust & preload look for ELS-N29 and firmware ELS-LGRP4-OVS base.
Click to expand...
Click to collapse
Well I was trying with LGRP4- all this while , which might have been the problem . Thanks for the great hint . Let me give LGRP6 a shot now .
---------- Post added at 06:08 AM ---------- Previous post was at 05:19 AM ----------
loser said:
Well I was trying with LGRP4- all this while , which might have been the problem . Thanks for the great hint . Let me give LGRP6 a shot now .
Click to expand...
Click to collapse
Bummer - Recovery failed at 5%, no change in status unfortunately . While the preload and the cust zips seem to have the region specific C185 tags , there seems to be no way to identify the main file belonging to the same region for making sure all 3 files are correct. Any ideas here ?
loser said:
Bummer - Recovery failed at 5%, no change in status unfortunately . While the preload and the cust zips seem to have the region specific C185 tags , there seems to be no way to identify the main file belonging to the same region for making sure all 3 files are correct. Any ideas here ?
Click to expand...
Click to collapse
Hi there,
Got your PM & read this thread to get more info about your problem.
You would need to use dload firmware for C185. Using other methods like HiSuite Proxy or HiSuite recovery won't help you at this point. Even eRecovery will get you ''Getting package info failled''!
{Mod edit: Link removed! - Oswald Boelcke, Moderator}
@Ashacreed, it seems that you got yourself a hardbricked device, because you've flashed a firmware from a diferent phone model, so in your case a new motherboard is required...
Kdrgs,
SilviuO
SilviuO said:
Hi there,
Got your PM & read this thread to get more info about your problem.
You would need to use dload firmware for C185. Using other methods like HiSuite Proxy or HiSuite recovery won't help you at this point. Even eRecovery will get you ''Getting package info failled''!
@Ashacreed, it seems that you got yourself a hardbricked device, because you've flashed a firmware from a diferent phone model, so in your case a new motherboard is required...
Kdrgs,
SilviuO
Click to expand...
Click to collapse
Dear SilviuO,
Thanks for getting back .
Nothing for C185 listed on easy-firmware , okay to flash with something else ? To be honest I made the most progress with Hisuite proxy method but unable to complete fully beyond 89% and the phone keeps in the bootloop every 1min 15 secs. Camera has become upside down and IMEI has become unknown .
I seem to have little hope .
Thoughts ?
loser said:
Dear SilviuO,
Thanks for getting back .
Nothing for C185 listed on easy-firmware , okay to flash with something else ? To be honest I made the most progress with Hisuite proxy method but unable to complete fully beyond 89% and the phone keeps in the bootloop every 1min 15 secs. Camera has become upside down and IMEI has become unknown .
I seem to have little hope .
Thoughts ?
Click to expand...
Click to collapse
You could try flashing other firmware (ex. for C605 or C432) using this method from my thread. You also need to rename those 2 zips (update_sd_cust&update_sd_preload) to match C185 dload firmware folder names . Be advised that this would be the first time someone tries the method explained on a P40 Pro / P40 Pro+ unit!
Cheers,
SilviuO
SilviuO said:
You could try flashing other firmware (ex. for C605 or C432) using this method from my thread. You also need to rename those 2 zips (update_sd_cust&update_sd_preload) to match C185 dload firmware folder names . Be advised that this would be the first time someone tries the method explained on a P40 Pro / P40 Pro+ unit!
Cheers,
SilviuO
Click to expand...
Click to collapse
Giving it a try as per your guide- wish me luck
---------- Post added at 09:44 AM ---------- Previous post was at 09:15 AM ----------
No luck -Software install failed , Incompatibility with current version . Please download the correct update package .
loser said:
Giving it a try as per your guide- wish me luck
---------- Post added at 09:44 AM ---------- Previous post was at 09:15 AM ----------
No luck -Software install failed , Incompatibility with current version . Please download the correct update package .
Click to expand...
Click to collapse
Guess that you will have to wait for a proper C185 dload firmware with a higher build number than the one you're currently on and try flashing again.
Kdrgs,
SilviuO
Version has upgraded to 1.62 but the issues are not resolved - because the flashing never completed fully looks like . The factor of the main file being not indicated as the main location based file marked for C185 region . I have got cust and preloaded files which C185 version , which seems to be not good enough . Interestingly wipe cache partition and factory reset do not seem to have any impact whatsoever on error , which I find strange based on my Android experience.
ELS-LGRP6-OVS 10.1.0.162
ELS-N39-CUSTC1851B2 (10.1.0.2)
ELS-N39-PRELOADC185R41B1 (10.1.0.1)
Related
Android 5.1.1 rom released today for Turkey by Huawei.
Link:
http://consumer.huawei.com/tr/mobile-phones/support/downloads/detail/ascend-p7-tr.htm?id=76245
Did anyone try it?
this version has a cust folder (update.app - vendor, i think), but it has no word document to see which is the baseband version, to see if it is a difference from b852!
If anyone try it, please, share!!!
Thanks!!!
Last night, i couldn't sleep , so i did the update to B861.
I was on B852, European cust C432D001.
The B861 update came with 2 folders, 1 named Cust_0, and the 2nd dload.
In 1st there is Turkish vendor, a little 18k Apk. In 2nd, there are the main update, 1,12 G and one update.asc (I don't know what is this for.).
So, i did the local update, and the main update did well, it ends at 100% and restart normally. (Didn't erased data).
To mention is that the phone heat after the update, as it never did it before. After the main update everything was working, except the keyboard. AND, i DIDN't had the CUST number (but instead i had an android pay application).
SO, i put the little 18 b apk (the one in the Cust_o folder), and did again a local update. AT 48%, the update failed and the phone restarted itself and entered the factory data reset automatically.
At the end of data reset, the phone loosed the settings, AND THE CUST VERSION WAS CHANGED TO C121D001!!!
Now, the android pay application disappeared.
But, all the applicationds work, i hat keyboard, motions, i think it is everything.
In about phone settings, i sow the base band version was changed to 23.600.08.00.00, - 23.02.2016, and it appears one new information about Android Security Level - 01.02.2016.
THAT WAS ALL. can anyone tell me if it is bad that the update changed my cust number?
I updated last night. The phone works fine. All options work. Motion control... vs.
The battery fast drain. But it will be normal soon.
HUAWEI P7-L10 cihazımdan Tapatalk kullanılarak gönderildi
B861
How to update this one because there are 3 update.app. I mean whats the proper sequence. Thank u all.
riveraljohnrey said:
How to update this one because there are 3 update.app. I mean whats the proper sequence. Thank u all.
Click to expand...
Click to collapse
You must copy dload folder to internal memory and make a local update, after then empty dload folder and put the vendor file there and make local update again. But be careful vendor formats everything and in Turkey version after the vendor update there is no radio application installed
B861
For what Cust version is this? Mine is CustC02D001, is it ok to upgrade? Thanks all
riveraljohnrey said:
For what Cust version is this? Mine is CustC02D001, is it ok to upgrade? Thanks all
Click to expand...
Click to collapse
I think your version is a branded Cust, possible Vodafone!
vd1122 said:
I think your version is a branded Cust, possible Vodafone!
Click to expand...
Click to collapse
No. My phone is not vodafone or something. Just a regular phone. Can we change Cust ?
inooni said:
Android 5.1.1 rom released today for Turkey by Huawei.
Link:
http://consumer.huawei.com/tr/mobile-phones/support/downloads/detail/ascend-p7-tr.htm?id=76245
Click to expand...
Click to collapse
can anyone upload this to mega or somewhere else?
i cant download it from huawei i dont know why
thanks
hi, This firmware has the double tap?
i have b852 CUSTC432D001 , it works on it ?
thanks
Belfagor81 said:
hi, This firmware has the double tap?
i have b852 CUSTC432D001 , it works on it ?
thanks
Click to expand...
Click to collapse
No, it has no double tap.
It works BUT YOU WILL LOOSE YOUR CUST (EUROPEAN).
I WAS ON THE SAME CUST, I DID THE UPDATE, THERE ARE NO CHANGES, IT WORKS THE SAME AS B852, AND YOU WILL LOOSE RADIO APPLICATION!
CUSTC432D001 is easy to install, if you use Huaweiextractor and change the cust files in the UPDATE.APP before updating.
No data lost and CWM-installed UPDATE-SuperSU-v2.65.zip runs without problems.
Integrated-SIP-Phone is without audio like in all Huawei-Stock ROMs for P7.
inooni said:
Android 5.1.1 rom released today for Turkey by Huawei.
Link:
http://consumer.huawei.com/tr/mobile-phones/support/downloads/detail/ascend-p7-tr.htm?id=76245
Click to expand...
Click to collapse
plssssssssssssssssss help meeeeeeeee!
can anyone upload this to somewhere else?
i cant download it from huawei!
---------- Post added at 10:04 PM ---------- Previous post was at 09:32 PM ----------
why i cant download anything from huawei??
when i click on download link it says: Server not found!
plsss help me i need this
blue7077 said:
plssssssssssssssssss help meeeeeeeee!
can anyone upload this to somewhere else?
i cant download it from huawei!
---------- Post added at 10:04 PM ---------- Previous post was at 09:32 PM ----------
why i cant download anything from huawei??
when i click on download link it says: Server not found!
plsss help me i need this
Click to expand...
Click to collapse
Try this.
https://yadi.sk/d/tEYGuODPqF7Ky
BTW what's the exact different between B852 and B861?
RangerP7 said:
BTW what's the exact different between B852 and B861?
Click to expand...
Click to collapse
Nothing really.
how can i get back to older buildnumber from this?
i cant use b800 rolle back it says cust fail on 99%
blue7077 said:
can anyone upload this to mega or somewhere else?
i cant download it from huawei i dont know why
thanks
Click to expand...
Click to collapse
blue7077 said:
how can i get back to older buildnumber from this?
i cant use b800 rolle back it says cust fail on 99%
Click to expand...
Click to collapse
i fixed my problem
if you miss any app after update you just have to find your cust version and install it
i was on b853 and my cust number was c433 and after i did this update i lost radio app and my cust number was changed
i downgrade to b158
then i download cust C433 copy to dload and update my phone with this file
and again i update to b853
now everything is fine like before
هرکی این مشکلو داره دانگرید کنه به 158 بعد کاست 433 آپدیت بزنه بعد به 853 کنه اوکی میشه
بیلد 853 واسه ایران اوکی هست
Hello everyone,
I tried to install a OTA update to nougat using SD system local update.
in 98% it's show error and loop in recovery...
i tried to install stock rom using fastboot get error..
using press (VOL+)+(VOL-) to enter update from SD and no success
my bootloader locked.
spec:
Found Phone : EVA-L09
IMEI : 869827028453054
Serial NR. : MWS0216719004568
Firmware : EVA-L09C671B150
Please if any one can help me bring back to life my p9.
sorry for my English.
There are several guides here how to get your P9 working again from such a state. Which have you tried?
Especially this is short and to the point: https://forum.xda-developers.com/showpost.php?p=71195544&postcount=4
Please be more verbose as to what you have done and which error messages and behaviour you see. That will enable others to understand what might be happening and how to help you.
tbr23 said:
There are several guides here how to get your P9 working again from such a state. Which have you tried?
Especially this is short and to the point: https://forum.xda-developers.com/showpost.php?p=71195544&postcount=4
Please be more verbose as to what you have done and which error messages and behaviour you see. That will enable others to understand what might be happening and how to help you.
Click to expand...
Click to collapse
always i have
FAILED (remote: Command not allowed) error message.
can you help me find the stock full firmware for my model?
this is my firmware now EVA-L09C671B150.
UP
Hi
I was in same situation, can't go to recovery, boot non stop on Huawei logo and I save my phone with DC Phoenix. You have to pay 15€ but that work perfectly
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Phiver13 said:
Hi
I was in same situation, can't go to recovery, boot non stop on Huawei logo and I save my phone with DC Phoenix. You have to pay 15€ but that work perfectly
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Click to expand...
Click to collapse
can you help me find Firmware for my p9?
steve19994 said:
can you help me find Firmware for my p9?
Click to expand...
Click to collapse
Easy
Follow the tutorial and don't forget to remove the sd card before starting
https://www.dc-unlocker.com/repair-bricked-huawei-honor-7
Do you have the P9 Eva-l09? If yes, take this one, unzip, put in DC Phoenix
http://www.modaco.com/forums/topic/377249-stock-rom-dload-file-p9-eva-l09-b136/
---------- Post added at 11:52 AM ---------- Previous post was at 11:52 AM ----------
steve19994 said:
can you help me find Firmware for my p9?
Click to expand...
Click to collapse
https://forum.xda-developers.com/p9/how-to/huawei-p9-deleted-t3380098/page3
That is my first time to post a Thread in XDA so bare with me
First of all i saw 2 persons with P10 plus stuck in erecovery+no twrp+locked bootloader+unable to unlock Bl
so i searched around the forums with the same problem there is bits of solutions there and here but not a complete one
so i unlocked my phone installed twrp and started the process with no twrp help only using my pc and Firmware finder app on pc
only pick firmware according to your model number
so requirements
1-working pc with windows
2-a USB cable
3-some knowledge of your router system and how to change the DNS in my case it was (ZTE) mostly your default router IP is (192.168.1.1) user:admin pass:admin
4-Firmware application on PC (https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146) download it Open Firmware Finder PC Program Now click on common Base. look for your Firmware in my case i wrote (VKY-L29C185) Now on your Firmware Change-log link right click Copy address (Tip Do not take a firmware that is not approved yet to be safe as an example i picked VKY-L29C185B171 though B172 is approved i took B171 and you can update via OTA later) after you copy the address go firmware finder and go to proxy tab and follow the steps from there
here some pictures of the process in the Attachments
(sorry for my bad English)
i took the idea from that Thread (https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165) Thanks to him and to my friends on Telegram group @Blackball
Mohamed Hasan said:
That is my first time to post a Thread in XDA so bare with me
First of all i saw 2 persons with P10 plus stuck in erecovery+no twrp+locked bootloader+unable to unlock Bl
so i searched around the forums with the same problem there is bits of solutions there and here but not a complete one
so i unlocked my phone installed twrp and started the process with no twrp help only using my pc and Firmware finder app on pc
only pick firmware according to your model number
so requirements
1-working pc with windows
2-a USB cable
3-some knowledge of your router system and how to change the DNS in my case it was (ZTE) mostly your default router IP is (192.168.1.1) user:admin pass:admin
4-Firmware application on PC (https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146) download it Open Firmware Finder PC Program Now click on common Base. look for your Firmware in my case i wrote (VKY-L29C185) Now on your Firmware Change-log link right click Copy address (Tip Do not take a firmware that is not approved yet to be safe as an example i picked VKY-L29C185B171 though B172 is approved i took B171 and you can update via OTA later)
here some pictures of the process in the Attachments
(sorry for my bad English)
i took the idea from that Thread (https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165) Thanks to him and to my friends on Tumbler group @Blackball
Click to expand...
Click to collapse
Thank you again sir.. But your late my phone now ,is in huawei centre.. ??
I need to try this but my phone is there.
Mohamed Hasan said:
That is my first time to post a Thread in XDA so bare with me
First of all i saw 2 persons with P10 plus stuck in erecovery+no twrp+locked bootloader+unable to unlock Bl
so i searched around the forums with the same problem there is bits of solutions there and here but not a complete one
so i unlocked my phone installed twrp and started the process with no twrp help only using my pc and Firmware finder app on pc
only pick firmware according to your model number
so requirements
1-working pc with windows
2-a USB cable
3-some knowledge of your router system and how to change the DNS in my case it was (ZTE) mostly your default router IP is (192.168.1.1) user:admin pass:admin
4-Firmware application on PC (https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146) download it Open Firmware Finder PC Program Now click on common Base. look for your Firmware in my case i wrote (VKY-L29C185) Now on your Firmware Change-log link right click Copy address (Tip Do not take a firmware that is not approved yet to be safe as an example i picked VKY-L29C185B171 though B172 is approved i took B171 and you can update via OTA later)
here some pictures of the process in the Attachments
(sorry for my bad English)
i took the idea from that Thread (https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165) Thanks to him and to my friends on Telegram group @Blackball
Click to expand...
Click to collapse
thanks,
i solve my problem with bricked P10 : https://forum.xda-developers.com/p1...d-frp-lock-t3727666/post75015364#post75015364
skiswim said:
thanks,
i solve my problem with bricked P10 : https://forum.xda-developers.com/p1...d-frp-lock-t3727666/post75015364#post75015364
Click to expand...
Click to collapse
did you solve it ? can you post your result for the benefit of all others
Eyezcripz said:
Thank you again sir.. But your late my phone now ,is in huawei centre..
I need to try this but my phone is there.
Click to expand...
Click to collapse
no problem mate we all are here to help each other
Mohamed Hasan said:
did you solve it ? can you post your result for the benefit of all others
Click to expand...
Click to collapse
before was imposibele to unlock Bootloader so device was be stuck in Bootloader with status:
Phone RELOCKED
frp: LOCK.
with methode eRecovery was simply flash firmware with Locked Bootloader!!
skiswim said:
before was imposibele to unlock Bootloader so device was be stuck in Bootloader with status:
Phone RELOCKED
frp: LOCK.
with methode eRecovery was simply flash firmware with Locked Bootloader!!
Click to expand...
Click to collapse
this tutorial is easy .. you said ur phone and my phone same problem .. this is the 1st tutorial to teach you in funkyteam...:good: erecovery...
btw my phone now is in huawei centre.. they call me later for the result ..if bad result and they said change motherboard .. i try this thread 1st before agree to them..
edit: Work very fine! All good but on my vky-l09 activate automatic dual sim .. i don't not whay but...
Bootloader it's lock automatic so it's good for warranty ...
So all fine only dual sim activat ... is there any way to remove the dual sim?
bondaru18 said:
edit: Work very fine! All good but on my vky-l09 activate automatic dual sim .. i don't not whay but...
Bootloader it's lock automatic so it's good for warranty ...
So all fine only dual sim activat ... is there any way to remove the dual sim?
Click to expand...
Click to collapse
It is good for you that it works but I do not understand the part about dual sim
Mohamed Hasan said:
It is good for you that it works but I do not understand the part about dual sim
Click to expand...
Click to collapse
Ok, my huawei p10 plus have soft/rom from TIM MOBILE ITALIA VKY-L09C55B140 so unlock bootloader, instal twrp , instal oeminfo from C432 and your procedure ...
So, all good , phone works very well but i don't no why dual SIM option was enabled...
I don't instal nothing from L29 or annithing from dual sim version...
bondaru18 said:
Ok, my huawei p10 plus have soft/rom from TIM MOBILE ITALIA VKY-L09C55B140 so unlock bootloader, instal twrp , instal oeminfo from C432 and your procedure ...
So, all good , phone works very well but i don't no why dual SIM option was enabled...
I don't instal nothing from L29 or annithing from dual sim version...
Click to expand...
Click to collapse
What oeminfo you used VKY-L29C432 or VKY-L09C432
mohamed hasan said:
what oeminfo you used vky-l29c432 or vky-l09c432
Click to expand...
Click to collapse
vky-l09c432
bondaru18 said:
vky-l09c432
Click to expand...
Click to collapse
Sry but i do not know what is the problem and why you got dual sim option but i think it is due to rebrand
Mohamed Hasan said:
That is my first time to post a Thread in XDA so bare with me
First of all i saw 2 persons with P10 plus stuck in erecovery+no twrp+locked bootloader+unable to unlock Bl
so i searched around the forums with the same problem there is bits of solutions there and here but not a complete one
so i unlocked my phone installed twrp and started the process with no twrp help only using my pc and Firmware finder app on pc
only pick firmware according to your model number
so requirements
1-working pc with windows
2-a USB cable
3-some knowledge of your router system and how to change the DNS in my case it was (ZTE) mostly your default router IP is (192.168.1.1) user:admin pass:admin
4-Firmware application on PC (https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146) download it Open Firmware Finder PC Program Now click on common Base. look for your Firmware in my case i wrote (VKY-L29C185) Now on your Firmware Change-log link right click Copy address (Tip Do not take a firmware that is not approved yet to be safe as an example i picked VKY-L29C185B171 though B172 is approved i took B171 and you can update via OTA later)
here some pictures of the process in the Attachments
(sorry for my bad English)
i took the idea from that Thread (https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165) Thanks to him and to my friends on Telegram group @Blackball
Click to expand...
Click to collapse
It that it? The howto ends with "Now on your Firmware Change-log link right click Copy address..."
What's the next step?
t.kijas said:
It that it? The howto ends with "Now on your Firmware Change-log link right click Copy address..."
What's the next step?
Click to expand...
Click to collapse
Sry i forgot to put that step in the thread but after you copy the address go to Firmware finder proxy tab and follow the steps from there
I did everything. Downloading package from server stuck at 0%
2% now, extremely slow lol
---------- Post added at 02:20 PM ---------- Previous post was at 02:03 PM ----------
Downloading update failed after waiting for ~20 minutes. I'd appreciate help
This works. Thanks for the effort posting.
D_avi_D said:
I did everything. Downloading package from server stuck at 0%
2% now, extremely slow lol
---------- Post added at 02:20 PM ---------- Previous post was at 02:03 PM ----------
Downloading update failed after waiting for ~20 minutes. I'd appreciate help
Click to expand...
Click to collapse
For mi works fine! Yes it's very slow but works...
my phone huawei nova 2i
fastboot:
Phone RELOCKED
frp: LOCK
how to fix it
my phone can't boot system
tks
anhminhvip said:
my phone huawei nova 2i
fastboot:
Phone RELOCKED
frp: LOCK
how to fix it
my phone can't boot system
tks
Click to expand...
Click to collapse
1. change your router DNS
2. use the FF software, find your package in firmware finder, and set it in proxy, and then double check your eRecovery in the same proxy window.
3. start the phone with eRecovery, you should be good to go.
Follow the original thread, there are bits here and there, if you read it a few times, you should be fine.
Hello,
i have the problem with google pay.
The safetycheck says cts: false.
I have the build 9.1.0.241
who can fix this problem?
thanks in advance
I had the same, it's not verified by Google, I went to 9.1.0.311 and it worked fine.
---------- Post added at 07:41 PM ---------- Previous post was at 07:40 PM ----------
It's not fixable without a firmware flash
It looks like this is a pretty common issue with P20 Pro users and here isn't a solution or a fix yet. Download to 9.1.0.311 until a fix has been implemented.
downgrade your firmware to previous version
Is it possible to downgrade without losing data ?!
Edit :Can someone point out a tutorial to downgrade?!
tnnuy said:
Is it possible to downgrade without losing data ?!
Edit :Can someone point out a tutorial to downgrade?!
Click to expand...
Click to collapse
Install Huawei HiSuite on PC, Connect your phone to PC, once the HiSuite recognized your phone, go to Software Update, it will say your phone has the latest software available. Click the "Other software versions" (or something like that) below, and it will show you the earlier firmware versions. Select something you know it works well, and just go ahead with it.
You should also backup your data using HiSuite before doing the downgrade, just in case if you need to restore them later.
spiderx_mm said:
Install Huawei HiSuite on PC, Connect your phone to PC, once the HiSuite recognized your phone, go to Software Update, it will say your phone has the latest software available. Click the "Other software versions" (or something like that) below, and it will show you the earlier firmware versions. Select something you know it works well, and just go ahead with it.
You should also backup your data using HiSuite before doing the downgrade, just in case if you need to restore them later.
Click to expand...
Click to collapse
I tried to do that and other ways and I just brick my p20 pro
Unlocked bootloader ?
I already solved my problem .. I used the Multi-Tool 8, and I used the unbrick part and flashed the img
yes @veimus my bootloader is unlocked.
any one can post preload and cust file for p40 pro c636 regions, i can find any on the internet.
or anyone can help me unbricked my phone
thank you
kellogsvibrant said:
any one can post preload and cust file for p40 pro c636 regions, i can find any on the internet.
or anyone can help me unbricked my phone
thank you
Click to expand...
Click to collapse
It is better to provide the all story and many, many details. From what EMUI version was on the phone, what methods you used till the current situation. There are so many variables.
sorry, im was on emui 12, then i really need gms to work, reverted back to emui 10, and iupdated to emui 12 using flashdrive trick, i DL wrong firmwaree i guess, then it got bricked stuck on erecovery mode. after i flashed using usb
kellogsvibrant said:
sorry, im was on emui 12, then i really need gms to work, reverted back to emui 10, and iupdated to emui 12 using flashdrive trick, i DL wrong firmwaree i guess, then it got bricked stuck on erecovery mode. after i flashed using usb
Click to expand...
Click to collapse
Write for every step what firmware, files have been used.
I updated my huawei to beta emui12, i got in ang got the OTA for emui 12, but i really need GMS now, then i used hisuite proxy downgraded my p40 pro to emui 10, but cant remmeber exact number, it was success then my pc wont detect my huawei, lastly i tries using the usb otg OTA update. the after restart i get this error
any one can link me full firmware files for this region , il gladly appriciate.
kellogsvibrant said:
any one can link me full firmware files for this region , il gladly appriciate.
Click to expand...
Click to collapse
It is not so easy as you think it is.
In my opinion it is better to go to the service.
It is a slightly chance to fix with HarmonyTP cable + HiSuite Proxy (Recovery OS).
Looking at your questions and answers, you have no idea about how the things works with this phone.
You can try to ask here too:
HISuite Proxy ( Huawei Phones' Updater & Soft-Brick Fixer )
Introduction Simply this application reverse engineers ( modifies ) HISuite, to be able to manipulate its Huawei servers' response data for installing official roms of Huawei, customarily. Features Support for OTA ROMs Support for FullOTA ROMs...
forum.xda-developers.com
or on telegram group here:
Huawei Firm Finder / HiSuite Proxy Support
https://professorjtj.github.io
t.me