Database Develop

[Q] hey my Galaxy note is stuck at boot plz help

ok hello guys i have an international version not the at and t anyways yesterday i used mobile odin pro and flashed to the new ics germany update it was very nice but then i went to a site called rootgalaxynote and installed a cm9 for the Chinese leaked ICS before installing it i backed it with CMW and then i went to recovery mode and installed the CM9 rom but when it was finished it started booting then booted again and again i tried to restore the CMW backup but at the end it said SYSTEM RESTORE FAILED ! tried flashing it withh pc odin but it gets stuck at nand write pleeeeease help pleeeease help i will do anything to fix my phone

Deademon said:
ok hello guys i have an international version not the at and t anyways yesterday i used mobile odin pro and flashed to the new ics germany update it was very nice but then i went to a site called rootgalaxynote and installed a cm9 for the Chinese leaked ICS before installing it i backed it with CMW and then i went to recovery mode and installed the CM9 rom but when it was finished it started booting then booted again and again i tried to restore the CMW backup but at the end it said SYSTEM RESTORE FAILED ! tried flashing it withh pc odin but it gets stuck at nand write pleeeeease help pleeeease help i will do anything to fix my phone
Click to expand...
Click to collapse
Can you access recovery? I am kind of in a similar situation but I have no access to recovery only download mode.

jwais said:
Can you access recovery? I am kind of in a similar situation but I have no access to recovery only download mode.
Click to expand...
Click to collapse
Op flashed Chinese leak...which has kernel known to brick phones

Note_E said:
Op flashed Chinese leak...which has kernel known to brick phones
Click to expand...
Click to collapse
i used to be able to enter recovery mode but now i went to a store to fix it and they tried to return it to the original samsung software in says AN ERROR OCCURRED WHLIE UPGRADING FIRMWARE what should i do ?

Deademon said:
i used to be able to enter recovery mode but now i went to a store to fix it and they tried to return it to the original samsung software in says AN ERROR OCCURRED WHLIE UPGRADING FIRMWARE what should i do ?
Click to expand...
Click to collapse
They borked your phone by doing that. Samsung repair. You can try pit file followed by stock gb buts its hit or miss

heimdel should help you. i dont have much time to explain. check how heimdell works. factory.rs and zimage file is enough to flash from heimdell rest leave them blank. take the good working base. you can also take the new PLY ics base. it should work

Help - Did I soft-brick my i9305???

Hello knowledgeable people!
I did a very stupid thing!... I took an official Samsung ROM package .tar.md5, remove the .md5 extension, extracted it, replaced boot.img with a custom kernel boot.img and re-compressed into a .tar package.
Then I took this .tar package and flashed it on the phone with Odin on my PC.
That didn't work, as expected.
The process blocked at one point.
I thought I will then just have to flash the Samsung official ROM to get everything back.
Well... not! I can flash the Samsung official ROM with Odin on my PC, but when the phone starts, it get stucked on bootloop on the glowing samsung logo.
I tried many things, including:
* wipe cache
* wipe data
but nothing worked...
At this point, I think I need to repartition/format everything and start from scratch but I don't know how to do this...
I tried to flash the Partition Identification Table kindly uploaded by @lyriquidperfection, but it didn't work (see here: http://forum.xda-developers.com/showthread.php?t=1950591) and it gets stuck in Odin as @narcarsiss mentions here: http://forum.xda-developers.com/showpost.php?p=33145970&postcount=2
Anyone has an idea?
> How to re-partition/re-format properly?
> Any other method to solve the bootloop?
Thanks for your help!

Why not to flash stock Sammy rom through Odin? This time - not modified?

Flash stock Sammy latest ROM .
Wipe everything in recovery and it should work.
I always have to wipe **** when installing official Sammy ROM.
Else it will stay at Samsung screen with flashing letters
Sent from my GT-I9305 using xda app-developers app

Hbohd said:
Why not to flash stock Sammy rom through Odin? This time - not modified?
Click to expand...
Click to collapse
This is what I tried... but it still get stuck at glowing samsung logo...

toeterbaas said:
Flash stock Sammy latest ROM .
Wipe everything in recovery and it should work.
I always have to wipe **** when installing official Sammy ROM.
Else it will stay at Samsung screen with flashing letters
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the answer.
What do you mean "wipe ****"?
Could you detail the steps?
1. Flash official sammy ROM through odin
2... enter recovery? (please confirm)
3... wipe what?
Thanks!

Have you tried flashing another kernel?Boeffla Etc then use KIES or Odin to flash back to stock
Sent from my GT-I9305 using xda app-developers app

Yes enter recovery after flashing with Odin.
When u power on hold volume up home key and power all at the same time release them when u see Samsung gt i9305 then wipe cach and wipe the other one. There are 2 wipe options.
Your phone should boot now it takes some time the first time around a minute.
Let me know if it worked
- flash stock Samsung ROM for your country with Odin
- go to recovery wipe the 2 options When u power on hold volume up home key and power all at the same time release them when u see Samsung gt i9305
-phone should boot takes a minute before he goes trough the flashing Samsung screen.
Sent from my GT-I9305 using xda app-developers app
---------- Post added at 09:51 AM ---------- Previous post was at 09:47 AM ----------
All you have to do is follow my steps.
It should work now
Sent from my GT-I9305 using xda app-developers app

Looki75 said:
Hello knowledgeable people!
I did a very stupid thing!... I took an official Samsung ROM package .tar.md5, remove the .md5 extension, extracted it, replaced boot.img with a custom kernel boot.img and re-compressed into a .tar package.
Then I took this .tar package and flashed it on the phone with Odin on my PC.
That didn't work, as expected.
The process blocked at one point.
I thought I will then just have to flash the Samsung official ROM to get everything back.
Well... not! I can flash the Samsung official ROM with Odin on my PC, but when the phone starts, it get stucked on bootloop on the glowing samsung logo.
I tried many things, including:
* wipe cache
* wipe data
but nothing worked...
At this point, I think I need to repartition/format everything and start from scratch but I don't know how to do this...
I tried to flash the Partition Identification Table kindly uploaded by @lyriquidperfection, but it didn't work (see here: http://forum.xda-developers.com/showthread.php?t=1950591) and it gets stuck in Odin as @narcarsiss mentions here: http://forum.xda-developers.com/showpost.php?p=33145970&postcount=2
Anyone has an idea?
> How to re-partition/re-format properly?
> Any other method to solve the bootloop?
Thanks for your help!
Click to expand...
Click to collapse
Tnx for the mention, but i heade bad news. I had to send my phone away to fix the issue.
This was a long time ago that this happened and better methods may of been discovered. Good luck:good:

narcarsiss said:
Tnx for the mention, but i heade bad news. I had to send my phone away to fix the issue.
This was a long time ago that this happened and better methods may of been discovered. Good luck:good:
Click to expand...
Click to collapse
Thanks for your answer!
I fear sending S3 to Samsung for repair is the only way, unfortunately... This is what I will do tomorrow (in 10hrs from now) unless a white knight arrives on this thread and gives me the golden solution!

You havent mentioned what rom version you tried.
I guess you used 4.3 official?
I could only guess but ther is probably more then just boot.img containing Knox code.
Knox is hindering users from downgrading bootloader and that maight be your problem now.
You did not mention wich version you try to recover to either.
So if you try with the old 4.1.2 it may be impossible.
Perhaps you need the newest official rom to get it working.
Sent from my GT-I9305 using XDA Premium 4 mobile app

tissot said:
You havent mentioned what rom version you tried.
I guess you used 4.3 official?
I could only guess but ther is probably more then just boot.img containing Knox code.
Knox is hindering users from downgrading bootloader and that maight be your problem now.
You did not mention wich version you try to recover to either.
So if you try with the old 4.1.2 it may be impossible.
Perhaps you need the newest official rom to get it working.
Sent from my GT-I9305 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for your answer.
The home made package was on 4.3 base.
Then I tried to reflash official 4.3.
I will give a try with 4.1.2...

Well... didn't work either... since I already had knox bootloader...
It shows "unsupported version".
Oh well...

tissot said:
You havent mentioned what rom version you tried.
I guess you used 4.3 official?
I could only guess but ther is probably more then just boot.img containing Knox code.
Knox is hindering users from downgrading bootloader and that maight be your problem now.
You did not mention wich version you try to recover to either.
So if you try with the old 4.1.2 it may be impossible.
Perhaps you need the newest official rom to get it working.
Sent from my GT-I9305 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You can't flash the old version. Odin will revert it back while installing.
Sent from my GT-I9305 using xda app-developers app

Looki75 said:
Thanks for your answer.
The home made package was on 4.3 base.
Then I tried to reflash official 4.3.
I will give a try with 4.1.2...
Click to expand...
Click to collapse
Okey
A bit far feched but is it possible your download is broken? Try DL again.
And either it is or not you could try installing 4.3 from different region as yours. Just to try every possability.
It shouldnt be impossible to fix this stupid phone
You dont have any nandroid backup some where.
Last option. Throw it on a brick wall to release som aggrevation and then you buy a Nexus 5. Problem solved.
Sent from my GT-I9305 using XDA Premium 4 mobile app

tissot said:
Okey
A bit far feched but is it possible your download is broken? Try DL again.
And either it is or not you could try installing 4.3 from different region as yours. Just to try every possability.
It shouldnt be impossible to fix this stupid phone
You dont have any nandroid backup some where.
Last option. Throw it on a brick wall to release som aggrevation and then you buy a Nexus 5. Problem solved.
Sent from my GT-I9305 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You made me laugh!
Seriously: DL is OK (I flashed this very official ROM many times in the past) and I do have a nandroid, but result is the same (stuck at glowing samsung logo).
The issue is way deeper.
Thanks for your help! Before trying the brick wall, I will try to make it repaired by Samsung!

Looki75 said:
You made me laugh!
Seriously: DL is OK (I flashed this very official ROM many times in the past) and I do have a nandroid, but result is the same (stuck at glowing samsung logo).
The issue is way deeper.
Thanks for your help! Before trying the brick wall, I will try to make it repaired by Samsung!
Click to expand...
Click to collapse
I had a brick once, butthe situation was a bit different. I have knox bootloader and tried to downgrade to a 4.1.2 rom without the bootloader package. The flash went ok, but my phone was stucked on Samsung Galaxy S3 GT-I9305 screen. After that, i was quite desperate and tried to reflash stock 4.3 via odin, but it failed :S
Then i tried to flash official Germany's 4.3 again, this time with the ODIN version inside CF-Root package (http://download.chainfire.eu/232/CF-Root1/CF-Auto-Root-m3-m3zh-gti9305.zip?retrieve_file=1), put the cable in another USB port, killed every kies proccess and rebooted phone in dowwnload mode. This time the flash went ok, i rebooted the phone into recovery (got bootloop) and wipe cache and factory reset. After this the phone booted up normally. Hope you can fix your phone

shucrut said:
I had a brick once, butthe situation was a bit different. I have knox bootloader and tried to downgrade to a 4.1.2 rom without the bootloader package. The flash went ok, but my phone was stucked on Samsung Galaxy S3 GT-I9305 screen. After that, i was quite desperate and tried to reflash stock 4.3 via odin, but it failed :S
Then i tried to flash official Germany's 4.3 again, this time with the ODIN version inside CF-Root package (http://download.chainfire.eu/232/CF-Root1/CF-Auto-Root-m3-m3zh-gti9305.zip?retrieve_file=1), put the cable in another USB port, killed every kies proccess and rebooted phone in dowwnload mode. This time the flash went ok, i rebooted the phone into recovery (got bootloop) and wipe cache and factory reset. After this the phone booted up normally. Hope you can fix your phone
Click to expand...
Click to collapse
Thanks! Any idea is valuable!
How did you create the ball pack of "4.1.2 rom without the bootloader" - in other words: how did you remove the bootloader from there?

Looki75 said:
Thanks! Any idea is valuable!
How did you create the ball pack of "4.1.2 rom without the bootloader" - in other words: how did you remove the bootloader from there?
Click to expand...
Click to collapse
I'd used this tutotial (just the part of commands, added everything that the original ".md5" has, removing just the "sboot.img", i'm not 100% sure if this is the only file to be off the new package, as i said, didnt work for me ), the only difference is that i'm using cygwin instead of linux itself, it worked like a charm
Basically all u need to do is unpack a original .md5 firmware (use winrar or so) and move the files (except sboot.img) to your home directory of linux or, in my case, cygwin (originally C:\cygwin\home\user-name), start the console and type the command bellow, switching the ".imgs" to match yours, of course:
Code:
cd $HOME
tar -H ustar -c image_1 image_2 > your_odin_package.tar
After this you must have a 1Gb+ .tar file (considering you will make a stock samsung flashable), now you will add md5 checksum to that, just to avoid troubles:
Code:
md5sum -t your_odin_package.tar >> your_odin_package.tar
mv your_odin_package.tar your_odin_package.tar.md5
and voilà, you have your flashable odin package. Of course you can try making one with just the system.img, boot.img and modem.img. If the phone boots up, do a factory reset. I have no idea if this will work in any occasion having knox bootloader trying to flash official 4.1.x, but you can also try with a samsung 4.3 rom.
In the last scenario, try to CF auto-root your phone, then flash an official CWM recovery via odin using this method i told u, boot into recovery and flash a custom rom, do a factory reset and wiping cache and dalvik cache. I hope one of the options work for you.
I'd recommend trying to flash a custom recovery and then a custom rom. If phone boots up and is functional, try to flash samsung official 4.3 again (if your desire is having the stock of course), not forgeting to factory reset via cwm first to avoid troubles.

Been in maybe like pratically the same situation
1st flash philz touch recovery ( install latest version)
2nd backup ur efs in external sd and copy it to a pc just in case (important if u mess up imei )
3rd Copy and rom in the external sd
4th Wipe data,cache,dilvik
5th In mount and storage Format everything except external sd ( u can backup ur internal sd card with 3rd step)
6th Flash Rom and reboot
7th If no imei then try a newer modem
http://forum.xda-developers.com/showthread.php?t=2572432
http://forum.xda-developers.com/showthread.php?t=2607279
Notice I only could get to run 4.3 to run after formating everything through philz touch recovery

Newly Rooted 4.4.2 - Only boots to recovery

Okay guys so I just rooted my att note 3 that was completely up to date using the towelroot.com method found here. Stupidly of me I was trying to follow a thread to change my system language in build.prop but after doing that It ONLY boots to recovery / safestrap. After the safestrap screen I tell it to continue to boot normaly and all i get after that is a black screen.
Any ideas? Is it possible to flash safestrap from odin / heimdall / recovery?
Ive tried factory resetting from safestrap and recovery and that didn't change anything.
I not even sure I have safestrap at this point I can get into recovery, and download mode but it sits at the "Samsung Galaxy NOTE 3 [Unlocked Icon] Custom" screen. It wont actually progress to the safestrap.
Before I tried to edit that build.prop the root / safestrap worked fine all day today, restarted several times for different reasons and still worked afterwards.
I had no encryption enabled.
Via recovery -
"Android system recovery <3e>
KOT49H.N900AUCUCNC2"
**** This Worked ****
Possibly? this as a fix?

Would this be okay to use as a stock Kitkat firmware resource for an Odin flash?

Anyone have a N900AUCUCNC2 ROM or firmware I can flash?

BLMaros said:
Anyone have a N900AUCUCNC2 ROM or firmware I can flash?
Click to expand...
Click to collapse
i have the .zip files for it and odin 3
*it sounds to me like a bootloop or a softbrick, I would recommend using this odin 3 and flash the stock kk rom the one i have is the unofficial and is pre-rooted. but it works when i bricked mine repeatedly trying roms.

farmerj said:
i have the .zip files for it and odin 3
*it sounds to me like a bootloop or a softbrick, I would recommend using this odin 3 and flash the stock kk rom the one i have is the unofficial and is pre-rooted. but it works when i bricked mine repeatedly trying roms.
Click to expand...
Click to collapse
That'd be awesome if you could get that to me some how. I more or less have everything fixed but the wake-up after entering my pattern lock is ungodly slow so I'd like to possibly try a different one.

BLMaros said:
That'd be awesome if you could get that to me some how. I more or less have everything fixed but the wake-up after entering my pattern lock is ungodly slow so I'd like to possibly try a different one.
Click to expand...
Click to collapse
I am assuming you know how to use odin.
https://www.dropbox.com/s/2hl1s7pvf5jatbm/NC2_Bootloader_N900AUCECMLG_VER_2.zip
hope this helps. let me know

farmerj said:
I am assuming you know how to use odin.
https://www.dropbox.com/s/2hl1s7pvf5jatbm/NC2_Bootloader_N900AUCECMLG_VER_2.zip
hope this helps. let me know
Click to expand...
Click to collapse
I do, this is perfect thank you!

Did it work?
Sent from Awesome Note 3 At&t
running Purerom CE.

Soft-Bricked my SM-G870A

I was in the process of downgrading my phone from 5.1.1 to 4.4.2.
I started here: http://forum.xda-developers.com/att...to-root-g870aucu1aoa1-4-4-4-2-7-2015-t3025119
I accidentally flashed the second Kernel first and the then my phone wouldn't boot, just boot-looped to to the recovery, I tried to do a factory reset/wiped, but still had same issue, then I factory reset/wiped and then cleared the cache. Same issue. I have tried updating to stock 5.1.1 roms, 4.4.2 roms, stock rooted roms, I have tried to just about everything I can find online. I either get failures ranging from the following:
I'm trying to get my phone working again by flashing the stock firmware with odin3 (tried 3.9 and 3.10) but it fails every time and gives me the error "SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1" while in download mode..
http://androidforums.com/threads/sm...wnload-recovery-still-work-cant-flash.930762/
http://forum.xda-developers.com/galaxy-s5/help/sm-g870a-samsung-s5-active-softbricked-t3161137
I have also tried this: http://www.droidviews.com/fix-status-7-error-while-installing-ota-update-or-roms/
since I was getting a status 7 error, but then I got another error after that (error is sideload package)
I can get to Custom OS download function and I can get to the boot recovery.
I honestly don't care if this phone is rooted or not, stock rom or not, but I need to get it back up and running, please help, Samsungs are new to me.

***UPDATE***
I just wanted to let everyone know that after about 30 different files, some through Odin, some through Recovery I finally got one to install and fix my AOS. The file that finally didn't fail to load in Recovery was Here: www androidfilehost com / ?w=search&s=g870a <--Add in the dots and remove the spaces, and make it a secure website.
It was more specifically G870A_OF3_tJ3_OTA.zip, it did fail something at the end of the recovery but it stayed on the screen for less than a second so I didn't see what failed but my phone is working now.
Hopefully one of those files will help someone else out.

Chosenbc said:
I just wanted to let everyone know that after about 30 different files, some through Odin, some through Recovery I finally got one to install and fix my AOS. The file that finally didn't fail to load in Recovery was Here: www androidfilehost com / ?w=search&s=g870a <--Add in the dots and remove the spaces, and make it a secure website.
It was more specifically G870A_OF3_tJ3_OTA.zip, it did fail something at the end of the recovery but it stayed on the screen for less than a second so I didn't see what failed but my phone is working now.
Hopefully one of those files will help someone else out.
Click to expand...
Click to collapse
I don't know if you've figured out by now, but you can't downgrade from 5.0+ to KitKat.
Sent from my SAMSUNG-SM-G900A using Tapatalk

Also need to unbrick my sm-G870A, help please!
Chosenbc said:
I just wanted to let everyone know that after about 30 different files, some through Odin, some through Recovery I finally got one to install and fix my AOS. The file that finally didn't fail to load in Recovery was Here: www androidfilehost com / ?w=search&s=g870a <--Add in the dots and remove the spaces, and make it a secure website.
It was more specifically G870A_OF3_tJ3_OTA.zip, it did fail something at the end of the recovery but it stayed on the screen for less than a second so I didn't see what failed but my phone is working now.
Hopefully one of those files will help someone else out.
Click to expand...
Click to collapse
Hi there, Chosenbc!
I am glad to read, that you figured iout to unbrick your G870A. Now I want to go the same way and downloaded that specific file, you mentioned. I know, how to flash through Odin a tar-File, but how did you flash through recovery that zip-file ? Via ADB ? Or sd-card in recovery ?
Done! (Unbrick)

Chosenbc said:
I just wanted to let everyone know that after about 30 different files, some through Odin, some through Recovery I finally got one to install and fix my AOS. The file that finally didn't fail to load in Recovery was Here: www androidfilehost com / ?w=search&s=g870a <--Add in the dots and remove the spaces, and make it a secure website.
It was more specifically G870A_OF3_tJ3_OTA.zip, it did fail something at the end of the recovery but it stayed on the screen for less than a second so I didn't see what failed but my phone is working now.
Hopefully one of those files will help someone else out.
Click to expand...
Click to collapse
GermanPDANerd said:
Hi there, Chosenbc!
I am glad to read, that you figured iout to unbrick your G870A. Now I want to go the same way and downloaded that specific file, you mentioned. I know, how to flash through Odin a tar-File, but how did you flash through recovery that zip-file ? Via ADB ? Or sd-card in recovery ?
Done! (Unbrick)
Click to expand...
Click to collapse
Worked for me too! Thanks Chosenbc!
BTW, I loaded it using the stock recovery. Took about 4 minutes to load and 2-3 more to boot up. Installs Android 5.1.1

I am having a the same issue. I was on a stock 5.1.1, didn't read that this kernel was for 4.2.2 Now my phone will not boot.
I have tried using ODIN to no success. Keeps failing every time I try to flash Stock Rom. I have tried probably 4 different stock..... Nothing. I have tried what you sugested, no succes. Can someone please help me get my phone out of Limbo..... SM-G870A PLEASE!!!

kidownzus said:
I am having a the same issue. I was on a stock 5.1.1, didn't read that this kernel was for 4.2.2 Now my phone will not boot.
I have tried using ODIN to no success. Keeps failing every time I try to flash Stock Rom. I have tried probably 4 different stock..... Nothing. I have tried what you sugested, no succes. Can someone please help me get my phone out of Limbo..... SM-G870A PLEASE!!!
Click to expand...
Click to collapse
Im in the same boat. Trying the files from OP first. Hopefully one works. I presume we need to move the OP zip file to the sd card on the phone, and update from recovery mode on the phone?

I just got a SM-G870A from a buddy of mine, he says he made the same mistake as the OP. Tried going from PB3 to NE4. He says he tried Odin flashing system images, kernels, and bootloader.
The system recovery says OC5.
Do I need to walk my flashes up OC5-OF2 - OF2-OF3 - OF3-OJ3 to fix this soft brick??

Thank you Chosenbc!!!!!!!!!!!! after several days (more than 5 weeks) I could unbrick my SM-G870A and this was possible all because of you and who uploaded the working Rom. Thank you, thank you thank you! for making this post!

Am I bricked?

Last Time i thought about little OC on my phone so I downloaded some ROM and bravely flashed it. (not the smartest thing to do I know, I know)
firstly the problem was the strange boot screen with random colours.
the after 2-3 months it started shutting down and displaying this "STD_STATE 0x00...00d0d1"
so because me is smart i did a formatting of EVERYTHING.
i found a android that should work (5.0.0 lollypop).
it had some issues like robooting instead of Everything.
but now only thing that works is a:
white inscription Android
red error, STD_STATE 0x0...000
and download mode
when i try to go into recovery mode(yes i have a clockwork mod) only thing is a black screen ( I have a suspitcion that it works but just don`t display anythig because if i click like i would to reboot i clock it reboots)
Any help, reprimand or downloads ?

Try downloading all stock files and flash it via Odin and download mode

Did you actually use everything designed for the S3 MINI? List links where you downloaded. And CWM is a fairly robust recovery so you can make a mistake if not careful.

Grumpy Cat said:
Did you actually use everything designed for the S3 MINI? List links where you downloaded. And CWM is a fairly robust recovery so you can make a mistake if not careful.
Click to expand...
Click to collapse
I can't give a link now, later I will upload files to media fire and link them here.
And i'm preety sure all files were designed for s3 mini but you know
Aaand about the CWM I know it'sounds powerful tool and it might be that I have taken a step too far
xNombre said:
Try downloading all stock files and flash it via Odin and download mode
Click to expand...
Click to collapse
Can I get links?

Blazej7 said:
Can I get links?
Click to expand...
Click to collapse
Firmware here and tutorial here. Hope that helped.

TVD1903 said:
Firmware here and tutorial here. Hope that helped.
Click to expand...
Click to collapse
Ok i`m now downloading the firmware and it`d gonna take a while. Realy appriciate it by the way .
i`, gonna keep you updated

Ok soooo...
I followed the tutorial and averything seems perfect till odin multi downloader just won`t see my phone. all the other odins work but not this one.
i`ve tried rebooting, turning odin on and off but it just won`t work. any advice?

Ok i know what`s wrong there is no version of odin multi downloader for my phone I think i am going to stay bricked unless you got any ideas?
@edit, Ok ive me a crown and call me a King I did it! I have a CWM now can anybody of you guys give me some links to Get my android back? because now i`m stuck at android screen

Ok i did it here is the list of things i did:
-found working CWM (Not touch!) despitse wrong wersion installed, it worked.
-did a Hard Wipe
-Downloaded OmniRom
-Flashed
-downloaded OC Kernel
-Flashed
-And voilà it works!