I have a Huawei P40 Pro+ (ELS-LGRP6-OVS 10.1.0.156) and I did a downgrade with what I thought the correct firmware from the Team MT Developers site with Hisuite Proxy, as I wanted to install Google services.
Since the downgrade I'm stucked in a bootloop and I'm not able to do anything with Hisuite anymore as the phone restarts every minute or so.
When I check the settings now it's saying:
Modell ELS-N39
Build Nr. 10.1.0.131 C432E2R3P3
IMEI unknown
I checked all the different forums I could find, but I couldn't found a solution to "restore" my Huawei.
I would be so thankful, I somebody can give me some advice.
Thanks a lot.
Have the exact same issue for a UAE device and seems like there are no known solutions for this problem so far. Did you try flashing a C432 version of the rom? I cannot try this as c185 is my version and no full version is available for download for my model.
Yes, I tried the rom ELS-LGRP6-OVS 10.1.0.156 from the MT Team site, but it wasn't working saying: Software install failed (the update package does not exist).
Have you tried the Hisuite method ? Since you have a full version of the C432 firmware readily available for download and install ? Reflashing with a full version might solve the bootloop issue ,
hello,
I had the same problem with a bootloop.
Only solution the after-sales service.
For GMS can be after the American election
loser said:
Have you tried the Hisuite method ? Since you have a full version of the C432 firmware readily available for download and install ? Reflashing with a full version might solve the bootloop issue ,
Click to expand...
Click to collapse
Yes I tried Hisuite together with Hisuite Proxy, but as the phone always restarts after a minute or so, the installation of the firmware can't finish so it doesn't work.
Would it be possible to flash the firmware from MT Team with fastboot and how could I do that?
The only time my phone doesn't reboot is when I'm in fastboot.
You need a full version of the Rom for your region, extract the update. App and give it a try. You will be the first one remember to be able to solve the issue if it works properly
joe.cocs said:
hello,
I had the same problem with a bootloop.
Only solution the after-sales service.
For GMS can be after the American election
Click to expand...
Click to collapse
really? is it with cost? will they add back the IMEI to the system?
tengo un p40 pro plus.... le meti la version 131 del p40 pro por hisute proxy, lo descarge al hisutie y cuando reincio............zas....... se reinica constantemente, cada minuto, la carmara al reves, y los imel null... y el sonido esto todos los parametros bien sube y baja volumen pero no se escucha
Related
good night I need help because my note 5 n9200 Hong Kong version eh accidentally activated FRP section on and leaves to settle down by Odin any customization and tried to put stock eh rom sanmobile and presents me with q Error csc have presented to the binary been blocked by the FRP and when I try to install a rom stock CSC tgy when Odin is installing the system partition by me to fail entered the recovery rate and says "failed to mount / system (invalid argument) "can not be done by smart swicht upon initialization stays at 2% off pit really ignore and not q do nothing works feel q really no way to recover what someone q I can help me it appreciate the soul ... I feel q my English is so bad I only speak Spanish:crying ::crying::crying:
ushaboyka said:
good night I need help because my note 5 n9200 Hong Kong version eh accidentally activated FRP section on and leaves to
Click to expand...
Click to collapse
I did a search of frp http://forum.xda-developers.com/search.php?searchid=396946262 here in the Q&A section and came up with a list you can read through to see if you can get it fixed.
CodeNameRedNeck said:
I did a search of frp http://forum.xda-developers.com/search.php?searchid=396946262 here in the Q&A section and came up with a list you can read through to see if you can get it fixed.
Click to expand...
Click to collapse
ya pude resolver el problema con una box reseteando el frp lock
tengo el mismo problema
ushaboyka said:
good night I need help because my note 5 n9200 Hong Kong version eh accidentally activated FRP section on and leaves to settle down by Odin any customization and tried to put stock eh rom sanmobile and presents me with q Error csc have presented to the binary been blocked by the FRP and when I try to install a rom stock CSC tgy when Odin is installing the system partition by me to fail entered the recovery rate and says "failed to mount / system (invalid argument) "can not be done by smart swicht upon initialization stays at 2% off pit really ignore and not q do nothing works feel q really no way to recover what someone q I can help me it appreciate the soul ... I feel q my English is so bad I only speak Spanish:crying ::crying::crying:
Click to expand...
Click to collapse
me puede ayudar soy nueva
Watch a youtube video work for me
Someone help me! Please!
Why I can't flash anything with dload method? I have tried lots of things: stock recovery, twrp, erecovery, proxy. But nothing. I tried to use firmware finder too for download an update fullota (of course, all the 3 ZIP package) and tried to put in dload the zips, the update.apps, but won't work. For dload I mean the three buttons method. It gives me always failed, at 5%, with the error "Software Install Failed". Please help me! I tried to toggle signature too to the firmware with huawei firmware extractor but not working. How I can flash firmware (especially firmware founded with firmware finder) using dload method? Please help me and my friends! Thank you to everyone!
These beta build found by firmware Finder might be not enable to be installed on your device. Use the latest check with EMEI to know if it fits.
Gazatus said:
These beta build found by firmware Finder might be not enable to be installed on your device. Use the latest check with EMEI to know if it fits.
Click to expand...
Click to collapse
I'm sorry didn't get the last part. Can you clarify it please ?
I'm on the same boat as the op. With the firmware finder I can only find PRA-LX1C33B130 but like op said, it stops at 5%. The firmware for my phone is PRA-LX1C33B120, but I can't find it anywhere. Right now my phone is bricked because I really can't find any version to install it.
Update firmware Finder, select the update you want and hit "check......" then it will now ask you for IMEI compatibility check
For me, Ive found more than 10 firmwares, I'm on B110 and there is up to b125... Nevertheless I can't install the proxy add-on, I can't use their "register with dns" feature, and I can't past the 5% threshold on dload flash. It seems to be not working at all for pra-lx1. I'm on stock B110 update (phone came with b100 and the B110 update was a legal ota without any mods).
Did you try to send a mail to huawei support team? Explain that you are a dev and you need to stock rom. They may send you a link share it please!
Gazatus said:
Update firmware Finder, select the update you want and hit "check......" then it will now ask you for IMEI compatibility check
For me, Ive found more than 10 firmwares, I'm on B110 and there is up to b125... Nevertheless I can't install the proxy add-on, I can't use their "register with dns" feature, and I can't past the 5% threshold on dload flash. It seems to be not working at all for pra-lx1. I'm on stock B110 update (phone came with b100 and the B110 update was a legal ota without any mods).
Did you try to send a mail to huawei support team? Explain that you are a dev and you need to stock rom. They may send you a link share it please!
Click to expand...
Click to collapse
That option is on android right ? I can't use it, so I was trying with the windows version but it doesn't have any option for checking the firmware (or at least i'm not finding it). ~
Well after you said that there is a option to check the firmware the only one that I found (PRA-LX1C33B130) when I checked the firmware it said that It was not approved to install. I guess that is why it stops at 5% ? maybe ? hopefully the firmware status goes to approved somewhere in the neaaarr future.
squallx85 said:
That option is on android right ? I can't use it, so I was trying with the windows version but it doesn't have any option for checking the firmware (or at least i'm not finding it). ~
Well after you said that there is a option to check the firmware the only one that I found (PRA-LX1C33B130) when I checked the firmware it said that It was not approved to install. I guess that is why it stops at 5% ? maybe ? hopefully the firmware status goes to approved somewhere in the neaaarr future.
Click to expand...
Click to collapse
I get software Install Failed at 5% using dload ALWAYS! Even with authorized/allowed firmware. I'm thinking that dload on Huawei p8 lite 2017 is not working at all.
Good...!!!
A few days ago I jump by FOTA an update of 95 mg on my LG-H815 and when I give update, this happens:
At the end as you see, it says: VERIFICATION PROBLEM.
I've tried several times a week and I always get the same, there is no way, and LG Bridge does not get any update, says my terminal is updated.
Do you know what can be done? how can I solve that?
These are the data of my G4 H815 :
Version Android: 6.0
Nivel de Parche de Seguridad: 2016-06-01
Version de banda base: MPSS.BO.2.5.C3-00109-M8992FAAAANAZM-1
Version de Kernel: 3.10.84
Numero de Compilacion: MRA58K
Version de SoftWare: H81520o
Version de SofWare de Seguridad: MDF v2.0 Release 2
The IMEI and serial number match the box.
I have marked this code:
*#*#244773825625#*#*
I put that code and it says Anti-rollback Version 3, that means I can not put another KDZ? Is there any way to unlock the Anti-rollback? The phone I bought as FREE in CEX, and it is really free, I am from Masmovil and without problem, recognizes the SIM and connects well to 4G, the rom is clean, but I would like to put a more current KDZ, apart I do not know if when Leave NOUGAT official for the H815 I will skip the update.
PD: as the forum does not let me publish images I explain: it detects me update but I can not install it, it tells me: verification problem.
Thanks for answering
1: You're in the H811 forum, so you might want to try the regular LG G4 section for more help
2: Have you tried updating using LG Bridge? That'll do an OTA without wiping anything and you should have good success.
Hello, it's my first time posting or asking here, I need help please ... I have an s8, the model mentioned above, then it has the frp lock, I've searched thousands of tutorials on YouTube about how to do the bypass and they do not work for me . that's because they have binary 1 or 2, their s8, but none of them work for me because I have binary 3, I tried to do it but in no way odin allows me to flash it, I tried flashing it with z3x 29.5, but it also gives me the error .. so I do not know what to do, I do not need a tutorial step by step, although that would help me a lot, I just want to know what is done in that case to investigate about that. pd here I leave the info of the cell that I read with the box z3x:
Searching Samsung modem... detectado COM7
Leyendo información del teléfono ... Listo
Modelo: SM-G950U
AP version: G950USQS3CRE2
CSC version: G950UOYN3CRE2
CP version: G950USQS3CRE2
Código del Producto: VZW
Phone SN: RF8J803TBGN
Número único: 9887E04541354F3750
Done with Samsung Tool PRO v.29.5
Thank you!
thetgenius said:
Hello, it's my first time posting or asking here, I need help please ... I have an s8, the model mentioned above, then it has the frp lock, I've searched thousands of tutorials on YouTube about how to do the bypass and they do not work for me . that's because they have binary 1 or 2, their s8, but none of them work for me because I have binary 3, I tried to do it but in no way odin allows me to flash it, I tried flashing it with z3x 29.5, but it also gives me the error .. so I do not know what to do, I do not need a tutorial step by step, although that would help me a lot, I just want to know what is done in that case to investigate about that. pd here I leave the info of the cell that I read with the box z3x:
Searching Samsung modem... detectado COM7
Leyendo información del teléfono ... Listo
Modelo: SM-G950U
AP version: G950USQS3CRE2
CSC version: G950UOYN3CRE2
CP version: G950USQS3CRE2
Código del Producto: VZW
Phone SN: RF8J803TBGN
Número único: 9887E04541354F3750
Done with Samsung Tool PRO v.29.5
Thank you!
Click to expand...
Click to collapse
Have you found out anything else yet??
I am in the exact same place, same everything but the phone is currently SPR (Sprint) not Verizon. They are the same as far as I know, as I plan to use this one on Verizon.
I will post here if I figure out anything else. Good Luck!
---------- Post added at 08:04 PM ---------- Previous post was at 07:31 PM ----------
Flash the latest Firmware using Odin3 v3.13.1_3B_PatcheD and it worked for me!!! Only cost my about 15 hours, of trial and error and research =-p.
SM-G950U VZW All firmware link:
https://updato.com/firmware-archive-select-model?q=SM-G950U&exact=1&r=VZW&v=&rpp=100
Odin3 v3.13.1_3B_PatcheD from this post:
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
From the posted link above:
"For those looking for a patched odin 3.13.1 version that is a newer build than all the renamed prince comsy 3.12.3 versions floating around.
I patched the latest Odin to offer similar functionality to the princecomsy patch; in that it ignores both the sha256 fails and the model mismatches.
- Developed and successfully tested for my verizon samsung s8 g950u to g950u1 and combination firmwares packages.
- Confirmed working on an unlocked S9+ g965U1 to VZW g965u.
- additional confirmation: G950w from G950u
Attached is the latest patched odin3 v3.13.1 windows version and the original odin v3.13.1 windows and mac version.
Official v3.13.1 Changelog
-Support for compressed binary files (LZ4)
-Support for Android O (Oreo)
-Implement 80 ports Mass D / L
-DVIF for Mac bundle
Be careful flashing!"
thetgenius said:
Hello, it's my first time posting or asking here, I need help please ... I have an s8, the model mentioned above, then it has the frp lock, I've searched thousands of tutorials on YouTube about how to do the bypass and they do not work for me . that's because they have binary 1 or 2, their s8, but none of them work for me because I have binary 3, I tried to do it but in no way odin allows me to flash it, I tried flashing it with z3x 29.5, but it also gives me the error .. so I do not know what to do, I do not need a tutorial step by step, although that would help me a lot, I just want to know what is done in that case to investigate about that. pd here I leave the info of the cell that I read with the box z3x:
Searching Samsung modem... detectado COM7
Leyendo información del teléfono ... Listo
Modelo: SM-G950U
AP version: G950USQS3CRE2
CSC version: G950UOYN3CRE2
CP version: G950USQS3CRE2
Código del Producto: VZW
Phone SN: RF8J803TBGN
Número único: 9887E04541354F3750
Done with Samsung Tool PRO v.29.5
Thank you!
Click to expand...
Click to collapse
having the same problem with my sprint s8 g950usqu3crd4, cant get anything to flash through odin, its frp locked too
adrian4064002 said:
having the same problem with my sprint s8 g950usqu3crd4, cant get anything to flash through odin, its frp locked too
Click to expand...
Click to collapse
did you make sure under options tab repartition is uncheked
Hello everyone, how's it going?
I own a Global Xiaomi MI8 Global Version
Since upgrading from miui10 to miui11 there have been some issues
-not detect SIM cards
-lose network
- no 3G / 4G connection, etc.
-Wifi turns on and off if
SIM card does not accept pin to unlock
Sometimes it works and sometimes it doesn't work.
And there is always a message on the screen that says:
network connection failed
What should I do to correct this problem?
I already tried some steps like:
- downgrade to miui10
- xiaomi.eu miui10 and miui11
-lineage os
But none of these steps corrected this problem.
Anyone else with this problem?
Does anyone have a solution?
Sorry for all these questions, but I've been living a nightmare for the last 3 weeks with the 3G / 4G signal constantly failing.
thanks in advance
sk3lt said:
Hello everyone, how's it going?
I own a Global Xiaomi MI8 Global Version
Since upgrading from miui10 to miui11 there have been some issues
-not detect SIM cards
-lose network
- no 3G / 4G connection, etc.
-Wifi turns on and off if
SIM card does not accept pin to unlock
Sometimes it works and sometimes it doesn't work.
And there is always a message on the screen that says:
network connection failed
What should I do to correct this problem?
I already tried some steps like:
- downgrade to miui10
- xiaomi.eu miui10 and miui11
-lineage os
But none of these steps corrected this problem.
Anyone else with this problem?
Does anyone have a solution?
Sorry for all these questions, but I've been living a nightmare for the last 3 weeks with the 3G / 4G signal constantly failing.
thanks in advance
Click to expand...
Click to collapse
Do you tried to get a new sim card instead? I am using lineage os 16 with 9.11.7 firmware not having this issue.
Kydipper said:
Do you tried to get a new sim card instead? I am using lineage os 16 with 9.11.7 firmware not having this issue.
Click to expand...
Click to collapse
Yes it does with all the cards
sk3lt said:
Yes it does with all the cards
Click to expand...
Click to collapse
If that so i think is hardware related issue u might take a visit to service centre
Kydipper said:
If that so i think is hardware related issue u might take a visit to service centre
Click to expand...
Click to collapse
This is not a hardware problem, it is a software problem that has corrupted files in the update.
Install stock rom with miflash. If still wrong that means hardware issue.
mar.ur said:
Install stock rom with miflash. If still wrong that means hardware issue.
Click to expand...
Click to collapse
It didn't solve either ...
Have you seen how many people here in the forum with the same problem?
I don't believe everyone has hardware problems
sk3lt said:
This is not a hardware problem, it is a software problem that has corrupted files in the update.
Click to expand...
Click to collapse
As u tried installed stock rom and custom rom the problem still persist, it is hard not to say the problem is due to software.
This is not the common issue and most of us didnt experienced it at all. Perhaps i may able to suggest you another way to fix it.
1. Install latest twrp (3.3.1.1)
2. Install latest miui 11 (either xiaomi.eu or global
Or
Type *#*#4636#*#* on your dial pad and it will direct to Display Information. Go to Phone information check the preferred network is LTE, TD-SDCMA, WCDMA.
If not, just send your phone to service centre.
sk3lt said:
It didn't solve either ...
Have you seen how many people here in the forum with the same problem?
I don't believe everyone has hardware problems
Click to expand...
Click to collapse
How many people? 10?
In the past I repaired that issue by fastboot command
fastboot erase modemst1
fastboot erase modemst2
but on Android 8+ is not allowed.
Do you have any twrp backup of efs and modem partitions?
mar.ur said:
How many people? 10?
In the past I repaired that issue by fastboot command
fastboot erase modemst1
fastboot erase modemst2
but on Android 8+ is not allowed.
Do you have any twrp backup of efs and modem partitions?
Click to expand...
Click to collapse
I don't know how many people, but there are already a few. I have no backup twrp. Do you have any idea how to solve without backup
No, I haven't. If flashing stock rom with miflash didn't help, there is no another solution according to me. Try to miflash and the latest miui 11 stable( global if you have global version and china if you have china version) once again with option "clen all" (even twice or three times, one by one)
sk3lt said:
Hello everyone, how's it going?
I own a Global Xiaomi MI8 Global Version
Since upgrading from miui10 to miui11 there have been some issues
-not detect SIM cards
-lose network
- no 3G / 4G connection, etc.
-Wifi turns on and off if
SIM card does not accept pin to unlock
Sometimes it works and sometimes it doesn't work.
And there is always a message on the screen that says:
network connection failed
What should I do to correct this problem?
I already tried some steps like:
- downgrade to miui10
- xiaomi.eu miui10 and miui11
-lineage os
But none of these steps corrected this problem.
Anyone else with this problem?
Does anyone have a solution?
Sorry for all these questions, but I've been living a nightmare for the last 3 weeks with the 3G / 4G signal constantly failing.
thanks in advance
Click to expand...
Click to collapse
hello, im having the same problems with my mi 8, i cant flash it because i dont have the bootloader unlocked, i sent the cellphone to repair and they told me that its a motherboard problem, you could fix it?
tomistereo said:
hello, im having the same problems with my mi 8, i cant flash it because i dont have the bootloader unlocked, i sent the cellphone to repair and they told me that its a motherboard problem, you could fix it?
Click to expand...
Click to collapse
I don't know how to fix it, mine still has the same problems. This person repairs https://www.facebook.com/Gsm.Xlocker
Respondi seu PM.
Consegui resolver da seguinte forma.
Baixei miui_MI8Global_9.6.27_7e6ce8a462_9.0
Baixei OrangeFox-R10.0_4-Stable-dipper
Baixei adb-setup-1.4.3 ( Para mi 8 )
Instalei todos os drivers para o xiaomi mi 8, feito isto entrei no fastboot, subi a recovery do orangefox, posteriormente, entrei no recovery, fiz um clean ALL data, absolutamente tudo. Fiz a montagem dentro do recovery para acessar no windows o celular e subi com o arquivo de imagem do "miui_MI8Global_9.6.27_7e6ce8a462_9.0", posteriormente a isto, fiz um flash persist dentro do próprio recovery do orangeFOX, após o flash do persist, dei novamente um WIPE all, ( o certo é subir a imagem após o wipe, e não antes... se não é feito a mesma coisa 2x ), após este procedimento iniciei a instalação da rom através do recovery, e voala... Tudo funcionando novamente. Não sei por que somente esta rom funcionou de boa, o ideal é que após o acerto do sistema ser feito o backup através do própio orange.
In english...
I answered your PM.
I managed to solve it as follows.
Downloaded miui_MI8Global_9.6.27_7e6ce8a462_9.0
Downloaded OrangeFox-R10.0_4-Stable-dipper
Downloaded adb-setup-1.4.3 (for mi 8)
Install all the drivers for the xiaomi mi 8, after do this, entered fastboot, upload orangefox recovery on fastboot mode, after this, run recovery, do a full wipe data, absolutely everything. You need upload the rom file inside orange recovery file of "miui_MI8Global_9.6.27_7e6ce8a462_9.0", then, that is, if a flash persists within the orangeFOX recovery itself, after the flash persists, again a WIPE everything, (the right thing is to upload an image after deletion, and not before ... if the same thing is not done 2x), after this procedure start installing the rom through recovery, wipe cache and davik ... Probably will everything working again.
Only this rom have worked in my cellphone, i dont have tested another with this method.
Im not skilled in english, so... if you dont understand i can reformulate the instructions again.