Hello everyone, I have the problem, that my 3T boots to recovery every time I boot. The system is no more booting. What I did was, "updating" in the CM about/update menu (from unofficial cm14.1 13.12. to 14.12. ).
So maybe an open recovery script was created and booted to bootloader. Update failed but I did it manually.
From now on the phone does just only boot twrp recovery (or is it a boot loop ?). I tried to restore a backup and install the oxygen os via zip and wiped all partitions (except internal storage) but nothing helps. Does anyone know this and can give me advice ? Thank a lot in advance.
Edit:
For the OnePlus One if found an error report which look a little bit my error:
The problem is suspected to stem from the "persist" partition getting corrupted during the reboot, even though CyanogenMod doesn't use this particular location. The damaged area doesn't get fixed like other partitions because a filesystem integrity check isn't ran. It's left corrupted, and even though the area isn't needed for the OS to run, the OnePlus One boot loops anyway.
Click to expand...
Click to collapse
But the partition layout on the 3T seems to be different, I can see only partitions like sda etc ...
same here
Called the 1+ support and they sent me the same file like in this post http://forum.xda-developers.com/oneplus-3t/help/unbrick-unbrick-tutorial-oneplus-3t-t3515306 They offered me a telephone support slot in 2 days, but I tried myself, now the default system is booting again. If you need assistance write I can guide you as best as i can.
Good luck to you.
sniperle said:
Called the 1+ support and they sent me the same file like in this post http://forum.xda-developers.com/oneplus-3t/help/unbrick-unbrick-tutorial-oneplus-3t-t3515306 They offered me a telephone support slot in 2 days, but I tried myself, now the default system is booting again. If you need assistance write I can guide you as best as i can.
Good luck to you.
Click to expand...
Click to collapse
Thank you!
Enviado do meu ONEPLUS A3003 através de Tapatalk
Thnaks so much
sniperle said:
Called the 1+ support and they sent me the same file like in this post http://forum.xda-developers.com/oneplus-3t/help/unbrick-unbrick-tutorial-oneplus-3t-t3515306 They offered me a telephone support slot in 2 days, but I tried myself, now the default system is booting again. If you need assistance write I can guide you as best as i can.
Good luck to you.
Click to expand...
Click to collapse
:good:
I follow your recommendation thanks for your assistance I fixed my OP3T,
What a mess ... after all this I wanted to install my CM backups again, but TWRP refused to boot. I had only a black screen with a white LED when going to recovery. But now after some hours I have a solution to this. You need to update Oxygen OS before going on !!
Make a full system update or flash this update via TWRP: http://downloads.oneplus.net/oneplus-3t/oneplus_3t_oxygenos_3.5.3/
After this TWRP is booting as expected.
Now I'll enjoy a beer or two or ....
Good luck to all others. If anybody needs assistance ... contact me.
never had a issue
Please help!!!! I tried flashing the update for the latest OTA, I had the full zip. I have unlocked bootloader, twrp, phh supersu, magisk and xposed. I did a nandroid backup and then clicked Wipe- Dalvik and Cache. I then flashed the zip. For 20 mins the boot logo was spinning around, so I rebooted into twrp to see what was going on. Now I can't reboot and it shows no data, it says my device is encrypted and I can't see any files. What can I do??
Was your internal storage encrypted before ?
TWRP doesn't show your internal storage and didn't ask for a password ?
fix bootloop
Boot into your recovery [Vol+ and Power]
Connect your phone to your PC
Execute the following fastboot command on your PC (More informations on fastboot)
Code:
fastboot continue
Your phone will start right away. :good:
I solved the problem
OK what i did was when the phone was starting and vibrating I push the power bottom and volume down bottom at the same time ,then i connected the phone to the PC,from the panel in the phone there are 3 categories to erase everything on the phone I did it all(1,2,3) and then I put the phone in ADB mode from the control panel in the phone,After that I flash via fastboot the original .zip from one plus for the version 4.0.3 (1.4 GB) ,when it finished I restarted and the phone started normal again,I hope this help someone alse,I was so desesperated:silly:.
RE
TOMASITO95 said:
OK what i did was when the phone was starting and vibrating I push the power bottom and volume down bottom at the same time ,then i connected the phone to the PC,from the panel in the phone there are 3 categories to erase everything on the phone I did it all(1,2,3) and then I put the phone in ADB mode from the control panel in the phone,After that I flash via fastboot the original .zip from one plus for the version 4.0.3 (1.4 GB) ,when it finished I restarted and the phone started normal again,I hope this help someone alse,I was so desesperated:silly:.
Click to expand...
Click to collapse
how ? can you please teach me ( my op3t didn`t go to system is says " md5 checksum failed , recovery failed , boot failed , system failed , boot_aging failed , dsp failed , modem failed please help me (
Change USB port
Try a different USB port. I flashed it through a 2.0 USB port instead of the 3.0 and no checksum error!
Hello to everyone.
I hope somebody to help me, last night i tried to update mi Lineage OS 16 (from erfanoabdi).
My device is unlocked bootloader, and i used the rom from nightly build (2018-21-09), it works fine and everything, the issue becomes when i look what was avaible a new update, so downloaded and install the new rom.
I do full wipe, after that i install the new rom, at this point everything its working fine, but after that when i changed the partition slot from A to B.
When i started to install the gapps they closed because it says what i am running Android 8.0, but its a mistake so i think that reboot the phone without install the gapps. So the phone starts well, so i decide again to boot into recovery (TWRP) to install the missing gapps.
When the device reboot in fastboot and i chosee the recovery option, the surprise was that TWRP was reemplaced by the stock recovery, and when i tried to flash the TWRP.img my device wont appear in fastboot mode, stays finding device and Windows wont recognized my phone.
I think the rom still no have usb adb support, so i cant flash TWRP
My device its unlocked and i was running the rom (but another nightly) .. without issues for a week ago... until i flashed this one
Now i have Lineage OS without GAPPS, without USB mode... Like the update from OPW 27 or 28 idk remember.
Its possible to fix? or my phone its ****ed, or there is one form to installl the gapps from anoter form?
Thanks for read this i hope somebody can help me.
My device its a XT1900-4 in Android 9.0 without google apps, only have the essencial apps like phone dialer , sms, the very very essencials app. Like an phone from 2008 jhaha
i offer some pay.
Update:
I attach some information photos from the Rom that im running:
(System Running) fine thanks
https://ibb.co/bXC7ye
(ADB is switched on, but no appears nothing)
https://ibb.co/exGpBz
(I tried with everyone of the opcions
https://ibb.co/ekv5jK
and this is my currently fastboot:
AP Fastboot Flash Mode (Secure)
BL: MBM-3.0-uefi-641a15b-180224
Baseband: M660_7042.27.01.74R PAYTON_LATAM_CUST
Product/Variant: payton xt1900-4 32GB P4
CPU: SDM630 1.0 (6)
Console [NULL]: null
Tools Mode Config: DISABLED
POWER OK
flashing_unlocked
Software status: Official
Transfer Mode: USB Connected
At this point my windows so says to my device is Error in a request for the USB device descriptor.
i tried last_usb_google driver.
Motorola Device manager 2.5.4
Minimal adb fastboot 1.4.2
and nothing works fine.
In my recovery appears this:
Android Recovery
motorola/payton/payton
8.0.0/OPW27.57.25-6-10/12
user/release-keys
Use volume to...etc and then i used the (Apply update from adb)
says:
Supported API: 3
Stopping adbd. . .
Now send the package you want to apply to the device with "adb sideload <filename>"
Help me pls:crying:
I have a Nokia 7 plus which is also a A/B device. I have observed many times that the fastboot mode isn't detected by the pc. Sometimes when I have a bootloop during experimentation, I force reboot into bootloader mode but it's not recognised. I reboot into recovery and select "reboot to bootloader", and this time it's recognised. Maybe these issues are related to A/B system, I'm not sure.
I think you should have the Motorola device manager installed if you're working on Windows. It contains the necessary drivers. I can't remember if it contains adb and fastboot executable files, but if it does then try using them (launching command prompt from there).
Broadcasted from Zeta Reticuli
Gravemind2015 said:
I have a Nokia 7 plus which is also a A/B device. I have observed many times that the fastboot mode isn't detected by the pc. Sometimes when I have a bootloop during experimentation, I force reboot into bootloader mode but it's not recognised. I reboot into recovery and select "reboot to bootloader", and this time it's recognised. Maybe these issues are related to A/B system, I'm not sure.
I think you should have the Motorola device manager installed if you're working on Windows. It contains the necessary drivers. I can't remember if it contains adb and fastboot executable files, but if it does then try using them (launching command prompt from there).
Broadcasted from Zeta Reticuli
Click to expand...
Click to collapse
thanks for quicky reply, but i tried that and it doesnt work for me... :c
the motorola device manager its installed correctly, but i think the usb in the Android 9 it´s no working on running s.o and even in fastboot.
vmmiguel said:
thanks for quicky reply, but i tried that and it doesnt work for me... :c
the motorola device manager its installed correctly, but i think the usb in the Android 9 it´s no working on running s.o and even in fastboot.
Click to expand...
Click to collapse
My windows cmputer says that my device doesnt works properly, i read all night about this and i think when i some point i made wipe /system so i delete the twrp and the rom doesnt have usb adb i think so hahaha, i think now my x4 will stuck on only aosp 9.0 without g services :crying::crying::crying:
id start with a flash all of the latest stock firmware to clean it up. then start over
edufur said:
id start with a flash all of the latest stock firmware to clean it up. then start over
Click to expand...
Click to collapse
I tried but i have only stock recovey, and the usb adb it's not working, i think that i need to flash stock rom from stock recovery, but i dont know...
vmmiguel said:
I tried but i have only stock recovey, and the usb adb it's not working, i think that i need to flash stock rom from stock recovery, but i dont know...
Click to expand...
Click to collapse
You have to flash stock rom from fastboot. Try removing "fastboot erase userdata" from script flash-all.
Comby_sk said:
You have to flash stock rom from fastboot. Try removing "fastboot erase userdata" from script flash-all.
Click to expand...
Click to collapse
Hello Buddy, i tried that but doesnt work, recently i discover that my usb default mode is gray so i think i cant switch beetwen the usb option, and i tried ADB over network, in terminal emulator to run adbd service but it crash :c
@erfanoabdiadbi plz you cant help me, i really i was enjoying you excelent deveploment, but now in stuck in this without essencial apps like whatsapp, my smartphone works like only phone without been smart jajaja:crying::good:
Anyone?
vmmiguel said:
Anyone?
Click to expand...
Click to collapse
Read through this thread carefully...
https://forum.xda-developers.com/moto-x4/development/rom-lineage-16-0-developer-preview-t3849699
I have more or less the same problem.
I am stuck in LineageOS 15.1 and for some reason Windows does not recognize my phone (it does with other x4 phone from a friend).
I also don't have GApps installed and also don't have root access. Since I can't connect my phone, I can't root or flash some custom recovery.
I really need some help.
So i flashed The pixelrom for mi8, and so far so good, but now i want to install magisk and twrp is gone, it was replaced with the stock recovery, and now when i try to do the exact same process with xiaomitoolv2 he detects my phone has pixel 4 and doesn't detect, i tried fastboot but it doesn't work either, Im running xubuntu x64
https://i.imgur.com/J9E6QmWl.png
EDIT: AFTER SEEING SOME POSTS HERE ON XDA I MANAGED TO USE XIAOMI MI FLASH TOOL WITH SUCCESS!, I NEEDED A USB HUB AND CONNECT THE PHONE IN FASTBOOT AND THEN APPLY THE STOCK IMAGES!, ANYONE WHO NEEDS HELP THIS SOLUTION CAN WORK ( ALL MY 3 USB PORTS DIDN'T WORK, WITH HUB IT WORKED )
ClaudioG123 said:
So i flashed The pixelrom for mi8, and so far so good, but now i want to install magisk and twrp is gone, it was replaced with the stock recovery, and now when i try to do the exact same process with xiaomitoolv2 he detects my phone has pixel 4 and doesn't detect, i tried fastboot but it doesn't work either, Im running xubuntu x64
https://i.imgur.com/J9E6QmWl.png
Click to expand...
Click to collapse
You do not have fastboot? ( think its more likely that you just can see the fastboot screen, but the phone is likely in fastboot mode. Because it sounds like you flashed a custom splash screen, which is causing your fastboot screen to not come up.
Also It seems that you missed some of the steps outlined in the install instructions for the Pixel rom ( I assume the Pixel 3 Q rom?)
You must install Magisk on that rom, you must use recommended TWRP,
I haven't used Ubuntu for flashing Roms recently so I can't provide solid recent steps on Ubuntu.
So I would suggest using a PC , ( surely you know someone with a PC) Enter fastboot, then you can verify that the phone actually can enter fastboot by checking Device manager, or by verifying that the phone is seen by ADB
If you are unable to access fastboot, you will need to go into EDL mode. Once in EDL
Download fastboot dipper images rom, and use flashall.bat method to restore the phone.
Download dipper_global_images_9.6.27_20190627.0000.00_9.0_global or a newer fastboot rom such as 10 .3..5 But It has to be a fastboot rom and not a Recovery rom
Unpack the rom twice on your desktop
You will be left with a folder and inside you will see batch files and a image folder.
Doubleclick Flashall.bat ( be careful on what you click, you want flashall.bat only) with the phone attached an in Recovery mode, fastboot or EDL
Flashall.bat is a batch script that will wipe your phone and restore all images, and then boot to system.
You should then Setup rom
Afterwards install TWRP and root then create a full Twrp backup and save to your PC.
This way you will have a quick solution if you ever need it again in the future.
Enjoy a working phone
Rom Link : https://bigota.d.miui.com/9.6.27/di...27_20190627.0000.00_9.0_global_30e0fc22ef.tgz
Any images fastboot rom will work, you can use the one I listed above or you can use the recent 10.3.5 Stable images rom, just find the link via Google.
I just spent 20 minutes typing this, so be considerate and click thanks or send me a beer if you want.
tsongming said:
You do not have fastboot? ( think its more likely that you just can see the fastboot screen, but the phone is likely in fastboot mode. Because it sounds like you flashed a custom splash screen, which is causing your fastboot screen to not come up.
Also It seems that you missed some of the steps outlined in the install instructions for the Pixel rom ( I assume the Pixel 3 Q rom?)
You must install Magisk on that rom, you must use recommended TWRP,
I haven't used Ubuntu for flashing Roms recently so I can't provide solid recent steps on Ubuntu.
So I would suggest using a PC , ( surely you know someone with a PC) Enter fastboot, then you can verify that the phone actually can enter fastboot by checking Device manager, or by verifying that the phone is seen by ADB
If you are unable to access fastboot, you will need to go into EDL mode. Once in EDL
Download fastboot dipper images rom, and use flashall.bat method to restore the phone.
Download dipper_global_images_9.6.27_20190627.0000.00_9.0_global or a newer fastboot rom such as 10 .3..5 But It has to be a fastboot rom and not a Recovery rom
Unpack the rom twice on your desktop
You will be left with a folder and inside you will see batch files and a image folder.
Doubleclick Flashall.bat ( be careful on what you click, you want flashall.bat only) with the phone attached an in Recovery mode, fastboot or EDL
Flashall.bat is a batch script that will wipe your phone and restore all images, and then boot to system.
You should then Setup rom
Afterwards install TWRP and root then create a full Twrp backup and save to your PC.
This way you will have a quick solution if you ever need it again in the future.
Enjoy a working phone
Rom Link : https://bigota.d.miui.com/9.6.27/di...27_20190627.0000.00_9.0_global_30e0fc22ef.tgz
Any images fastboot rom will work, you can use the one I listed above or you can use the recent 10.3.5 Stable images rom, just find the link via Google.
I just spent 20 minutes typing this, so be considerate and click thanks or send me a beer if you want.
Click to expand...
Click to collapse
Tried that but this happens in the batch file, also it goes to the fastboot screen where it appears fastboot and the figure, but when i press the batch he leaves that screen and goes to black screen with on top saying press to restart or shutdown, and that error occurs on the batch, even if the phone isn't conected it gets me that error
ClaudioG123 said:
Tried that but this happens in the batch file, also it goes to the fastboot screen where it appears fastboot and the figure, but when i press the batch he leaves that screen and goes to black screen with on top saying press to restart or shutdown, and that error occurs on the batch, even if the phone isn't conected it gets me that error
Click to expand...
Click to collapse
And also I only went Linux because on Windows the phone was getting detected but wasn't working, and Linux was detecting and working with xiaomitoolv2
I will try on Linux to see If the error persists, but that error can he there because the phone, the brand, model and codename are the same has the pixel 4
ClaudioG123 said:
And also I only went Linux because on Windows the phone was getting detected but wasn't working, and Linux was detecting and working with xiaomitoolv2
I will try on Linux to see If the error persists, but that error can he there because the phone, the brand, model and codename are the same has the pixel 4
Click to expand...
Click to collapse
If you are using linux and successful rebooted the phone into fastboot mode, just try to replace the recovery.
Download the recent version of TWRP for your phone and move it to the fastboot directory then open a shell in that directory.
Type in your shell: "sudo fastboot flash recovery yourtwrpimage.img"
Now, unplug the USB and you MUST reboot and immediately hold down the upvolume and power until the TWRP boots. If you miss it, the system will replace the stock recovery image again and you will have to start over.
You can then individually flash the partition images of your choice or ROM ZIP file, but you will still have to flash the full fastboot images after you get the phone recognizing as an mi8.
Agimax said:
If you are using linux and successful rebooted the phone into fastboot mode, just try to replace the recovery.
Download the recent version of TWRP for your phone and move it to the fastboot directory then open a shell in that directory.
Type in your shell: "sudo fastboot flash recovery yourtwrpimage.img"
Now, unplug the USB and you MUST reboot and immediately hold down the upvolume and power until the TWRP boots. If you miss it, the system will replace the stock recovery image again and you will have to start over.
You can then individually flash the partition images of your choice or ROM ZIP file, but you will still have to flash the full fastboot images after you get the phone recognizing as an mi8.
Click to expand...
Click to collapse
Will try soon as im home, if i get waiting for device should i wait?
Agimax said:
If you are using linux and successful rebooted the phone into fastboot mode, just try to replace the recovery.
Download the recent version of TWRP for your phone and move it to the fastboot directory then open a shell in that directory.
Type in your shell: "sudo fastboot flash recovery yourtwrpimage.img"
Now, unplug the USB and you MUST reboot and immediately hold down the upvolume and power until the TWRP boots. If you miss it, the system will replace the stock recovery image again and you will have to start over.
You can then individually flash the partition images of your choice or ROM ZIP file, but you will still have to flash the full fastboot images after you get the phone recognizing as an mi8.
Click to expand...
Click to collapse
I can try to see if he works with xiaomitoolv2, and will try what you said and post here
tsongming said:
you do not have fastboot? ( think its more likely that you just can see the fastboot screen, but the phone is likely in fastboot mode. Because it sounds like you flashed a custom splash screen, which is causing your fastboot screen to not come up.
Also it seems that you missed some of the steps outlined in the install instructions for the pixel rom ( i assume the pixel 3 q rom?)
you must install magisk on that rom, you must use recommended twrp,
i haven't used ubuntu for flashing roms recently so i can't provide solid recent steps on ubuntu.
so i would suggest using a pc , ( surely you know someone with a pc) enter fastboot, then you can verify that the phone actually can enter fastboot by checking device manager, or by verifying that the phone is seen by adb
if you are unable to access fastboot, you will need to go into edl mode. Once in edl
download fastboot dipper images rom, and use flashall.bat method to restore the phone.
download dipper_global_images_9.6.27_20190627.0000.00_9.0_global or a newer fastboot rom such as 10 .3..5 but it has to be a fastboot rom and not a recovery rom
unpack the rom twice on your desktop
you will be left with a folder and inside you will see batch files and a image folder.
doubleclick flashall.bat ( be careful on what you click, you want flashall.bat only) with the phone attached an in recovery mode, fastboot or edl
flashall.bat is a batch script that will wipe your phone and restore all images, and then boot to system.
you should then setup rom
afterwards install twrp and root then create a full twrp backup and save to your pc.
this way you will have a quick solution if you ever need it again in the future.
enjoy a working phone
rom link : https://bigota.d.miui.com/9.6.27/di...27_20190627.0000.00_9.0_global_30e0fc22ef.tgz
any images fastboot rom will work, you can use the one i listed above or you can use the recent 10.3.5 stable images rom, just find the link via google.
I just spent 20 minutes typing this, so be considerate and click thanks or send me a beer if you want.
Click to expand...
Click to collapse
i used this solution but i go i connected the phone in a usb hub!
ClaudioG123 said:
i used this solution but i go i connected the phone in a usb hub!
Click to expand...
Click to collapse
Did you try as @Agimax suggested? You have shown that the device is seen in fastboot. If you can push recovery to the phone then the issue will be easily resolved.
You should also be able to use this modified MiFlash : https://forum.xda-developers.com/android/software/tool-miflash-linux-t3708847
( Maybe you are already using this?)
I have also had the issue in the past where fastboot was available but attempting to push recovery failed. In some cases trying alternate versions of TWRP would work, and for me fastboot flashall will usually always work.
Another option is to push the images from the images folder individually. if one fails go to the next and then come back and retry the images that failed the first time. (Edit: I just reread Agimax post above, he mentioned this already.)
If you are in EDL mode you should be able to restore the stock images without receiving the error message You can enter EDL without opening the device, either by using a EDL deep flash cable or https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
Another option ( requires a PC) is QPST, which I have used a lot in the past, its quick and easy to use. : https://miui.blog/any-devices/qualcomm-qpst-tool/
tsongming said:
Did you try as @Agimax suggested? You have shown that the device is seen in fastboot. If you can push recovery to the phone then the issue will be easily resolved.
You should also be able to use this modified MiFlash : https://forum.xda-developers.com/android/software/tool-miflash-linux-t3708847
( Maybe you are already using this?)
I have also had the issue in the past where fastboot was available but attempting to push recovery failed. In some cases trying alternate versions of TWRP would work, and for me fastboot flashall will usually always work.
Another option is to push the images from the images folder individually. if one fails go to the next and then come back and retry the images that failed the first time. (Edit: I just reread Agimax post above, he mentioned this already.)
If you are in EDL mode you should be able to restore the stock images without receiving the error message You can enter EDL without opening the device, either by using a EDL deep flash cable or https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
Another option ( requires a PC) is QPST, which I have used a lot in the past, its quick and easy to use. : https://miui.blog/any-devices/qualcomm-qpst-tool/
Click to expand...
Click to collapse
Your solution worked with the phone in fastboot, but i had to try a usb hub, that's all, has for roms, experienced both of pixelrom3 and havoc and didn't conviced me enough, i find miui 11 of xiaomi.eu more good looking and doesn't have bugs, and thank you, you are a lifesafer, if it wasn't for that i would have never flashed stock rom back
tsongming said:
Did you try as @Agimax suggested? You have shown that the device is seen in fastboot. If you can push recovery to the phone then the issue will be easily resolved.
You should also be able to use this modified MiFlash : https://forum.xda-developers.com/android/software/tool-miflash-linux-t3708847
( Maybe you are already using this?)
I have also had the issue in the past where fastboot was available but attempting to push recovery failed. In some cases trying alternate versions of TWRP would work, and for me fastboot flashall will usually always work.
Another option is to push the images from the images folder individually. if one fails go to the next and then come back and retry the images that failed the first time. (Edit: I just reread Agimax post above, he mentioned this already.)
If you are in EDL mode you should be able to restore the stock images without receiving the error message You can enter EDL without opening the device, either by using a EDL deep flash cable or https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
Another option ( requires a PC) is QPST, which I have used a lot in the past, its quick and easy to use. : https://miui.blog/any-devices/qualcomm-qpst-tool/
Click to expand...
Click to collapse
After i put the usb usb on laptop both solutions worked, and i was in windows and not linux, in linux works also
ClaudioG123 said:
After i put the usb usb on laptop both solutions worked, and i was in windows and not linux, in linux works also
Click to expand...
Click to collapse
That's great sorry for being late to respond, I haven't had time to check XDA for a couple of days. But I an really glad that you got everything sorted out.
BTW, I agree about Xiaomi.EU, and I also find it to be the most stable...by far. Plus, it's obviously the most up to date. No doubt that AOSP roms are fun, but also very unpredictable. I keep Xaiomi.EU on mi daily driver, ( the Mi8) and I tinker around with AOSP roms on my old phones.
Take care
tsongming said:
That's great sorry for being late to respond, I haven't had time to check XDA for a couple of days. But I an really glad that you got everything sorted out.
BTW, I agree about Xiaomi.EU, and I also find it to be the most stable...by far. Plus, it's obviously the most up to date. No doubt that AOSP roms are fun, but also very unpredictable. I keep Xaiomi.EU on mi daily driver, ( the Mi8) and I tinker around with AOSP roms on my old phones.
Take care
Click to expand...
Click to collapse
Currently on miui 11 on mine, and it's perfect, like the design vs miui 10 from official, it's fast and stable, only thing is that some apps that use gps are sometimes bugged, and does your mi8 drain battery a bit faster than in miui 10?
ClaudioG123 said:
Currently on miui 11 on mine, and it's perfect, like the design vs miui 10 from official, it's fast and stable, only thing is that some apps that use gps are sometimes bugged, and does your mi8 drain battery a bit faster than in miui 10?
Click to expand...
Click to collapse
Yeah, I don't think that they have that part completely sorted yet. I definitely had better battery life on the last Xiaomi.EU Pie rom. But its not too bad with this latest version. Checking Gsam battery manager just now my average is 7HR's 6 Min SOT Whereas with the Miui 11 Xiaomi EU Chinese Stable rom, I averages about 10 hrs SOT ( If I remember correctly)
Personally, I am not having any app issues.
Usually if I had a permissions issues after restoring apps, I would just uninstall and reinstall the app and that will usually take care of any issues. Another thing to check , is t make sure that any problem apps have the right permissions enabled.
tsongming said:
Yeah, I don't think that they have that part completely sorted yet. I definitely had better battery life on the last Xiaomi.EU Pie rom. But its not too bad with this latest version. Checking Gsam battery manager just now my average is 7HR's 6 Min SOT Whereas with the Miui 11 Xiaomi EU Chinese Stable rom, I averages about 10 hrs SOT ( If I remember correctly)
Personally, I am not having any app issues.
Usually if I had a permissions issues after restoring apps, I would just uninstall and reinstall the app and that will usually take care of any issues. Another thing to check , is t make sure that any problem apps have the right permissions enabled.
Click to expand...
Click to collapse
Im using Europe instead of china, does it change? Read changelog and didnt figured it out
This app works on android 9 but on 10 it bugs didn't had the issue back with miui 10 stock
Liked the fact that they boosted sound
ClaudioG123 said:
Im using Europe instead of china, does it change? Read changelog and didnt figured it out
This app works on android 9 but on 10 it bugs didn't had+ the issue back with miui 10 stock
Liked the fact that they boosted sound
Click to expand...
Click to collapse
I am also using the Xiaomi EU rom because I want to use Android 10, and as I mentioned for me the battery life is fine. So I wouldn't recommend changing.
If you having app issues, see if there is a beta version of that app.
tsongming said:
I am also using the Xiaomi EU rom because I want to use Android 10, and as I mentioned for me the battery life is fine. So I wouldn't recommend changing.
If you having app issues, see if there is a beta version of that app.
Click to expand...
Click to collapse
Mate, you are using MIUI 10 eu latest beta pie update or stable? I curiuous your rom coz you saying you are taking good battery life.
Sorry for my bad English.
harnkalkn said:
Mate, you are using MIUI 10 eu latest beta pie update or stable? I curiuous your rom coz you saying you are taking good battery life.
Sorry for my bad English.
Click to expand...
Click to collapse
I am using the weekly Xiaomi.Eu beta rom, averaging 7 hours and 15 minutes SOT and no real issues.
mi 8 bricked
i bricked mi 8 when i try to re-lock bootloader. now i only received a main menu and red massage "this miui version can't be installed on this device". anyone can help me?
I unlocked my G7 Plus and flashed twrp and then LineageOS onto it fairly easily but now I want to try a different ROM but having issues.
Firstly, when I go into recovery it seems to be the LineageOS recovery and not the TWRP I initially flashed so I can't just select a new ROM to flash.
Secondly, I do an adb devices in LineageOS and my phone shows up, so I then do adb reboot bootloader and it boots into the bootloader but another adb devices and nothing shows up.
In windows I have Mot Composite ADB Interface as my driver and It was working when I flashed LineageOS but IDK what's up now.
Yes I have enabled debugging in dev options and all of that stuff so I'm now.
Any help appreciated.
darklighthim said:
I unlocked my G7 Plus and flashed twrp and then LineageOS onto it fairly easily but now I want to try a different ROM but having issues.
Firstly, when I go into recovery it seems to be the LineageOS recovery and not the TWRP I initially flashed so I can't just select a new ROM to flash.
Secondly, I do an adb devices in LineageOS and my phone shows up, so I then do adb reboot bootloader and it boots into the bootloader but another adb devices and nothing shows up.
In windows I have Mot Composite ADB Interface as my driver and It was working when I flashed LineageOS but IDK what's up now.
Yes I have enabled debugging in dev options and all of that stuff so I'm now.
Any help appreciated.
Click to expand...
Click to collapse
with LineageOS recovery, flash twrpinstaller.zip from a SD and that's it
https://dl.twrp.me/lake/twrp-installer-3.4.0-0-lake.zip.html
darkherman said:
with LineageOS recovery, flash twrpinstaller.zip from a SD and that's it
https://dl.twrp.me/lake/twrp-installer-3.4.0-0-lake.zip.html
Click to expand...
Click to collapse
I don't have an SD card in the device nor a spare one to use, so the only option is apply from ADB.
darklighthim said:
I don't have an SD card in the device nor a spare one to use, so the only option is apply from ADB.
Click to expand...
Click to collapse
so use adb sideload
darkherman said:
with LineageOS recovery, flash twrpinstaller.zip from a SD and that's it
https://dl.twrp.me/lake/twrp-installer-3.4.0-0-lake.zip.html
Click to expand...
Click to collapse
darkherman said:
so use adb sideload
Click to expand...
Click to collapse
This was my problem, I couldn't get adb to work except when I'm in Android, I could do an adb devices command while in the OS and i'd see my device listed.
As soon as I got into the bootloader or recovery it showed blank under listed devices.
The least of my problems now anyway as I found an old 2gb SD card which then slipped from the SIM/SD holder and got stuck inside the phone, then in my attempt to pry it out I cracked the screen by the SIM slot.
Not my daily driver phone so I'll need to eventually get a new screen before I can do any more with this.
darklighthim said:
This was my problem, I couldn't get adb to work except when I'm in Android, I could do an adb devices command while in the OS and i'd see my device listed.
As soon as I got into the bootloader or recovery it showed blank under listed devices.
The least of my problems now anyway as I found an old 2gb SD card which then slipped from the SIM/SD holder and got stuck inside the phone, then in my attempt to pry it out I cracked the screen by the SIM slot.
Not my daily driver phone so I'll need to eventually get a new screen before I can do any more with this.
Click to expand...
Click to collapse
Just boot TWRP and everything is fine...
LineageOS contains its own recovery since recovery partition is merged into boot.img on A/B devices. New ROM = new boot.img = new recovery
A boot.img MUST contain a recovery and Lineage doesn't use TWRP but a own one.