How to stop Nokia 2.3 from auto boot when charger is plugged in? - Nokia 2.1 Questions & Answers

1. Automatic boot when charger is connected, power off this Nokia 2.3 then connecting the charger is like pressing the power button, it just do a normal start, also power it down while connected to to charger still it just do a normal rebooting.
2. Factory reset is locked (settings>backup and restore>factory reset>) that function is greyed out meanwhile it's not working even if you touch for ages.
3. Build number is not working, (settings>about phone>build number) tapping this function Has to unlock developer options hence this function is not working too There's no way I can enable debugging mode.
4. Recovery boot is locked, pressing power button + Vol- it display this massage "as fastboot is locked..... your phone will restart in (3)s"....., Pressing power button + Vol+ the device just start normally,. Pressing all the three buttons device will not react at all, I tried holding these 3 buttons for 2 minutes but nothing happened.
5. No updates to fix this online currently running android 10 which means there's no android 11 patches for Nokia 2.3 to fix this issues
6. Can't root this device as almost every possibility is off.
PLEASE NOTE: THIS ANDROID 10 ROM AM USING WAS FLASHED TO THIS DEVICE BY A FRIEND MEANWHILE THE UPDATE FROM ANDROID PIE(9) TO ANDROID 10 (R) WAS DONE OFFLINE
IF THERE'S ANYWAY TO FIX THIS PLEASE ADVISE ON WHAT TO BE DONE OR IF THERE'S ANY SOFTWARE THAT CAN FIX THIS PLEASE HELP THIS IS KILLING ME .

Lin12 said:
1. Automatic boot when charger is connected, power off this Nokia 2.3 then connecting the charger is like pressing the power button, it just do a normal start, also power it down while connected to to charger still it just do a normal rebooting.
2. Factory reset is locked (settings>backup and restore>factory reset>) that function is greyed out meanwhile it's not working even if you touch for ages.
3. Build number is not working, (settings>about phone>build number) tapping this function Has to unlock developer options hence this function is not working too There's no way I can enable debugging mode.
4. Recovery boot is locked, pressing power button + Vol- it display this massage "as fastboot is locked..... your phone will restart in (3)s"....., Pressing power button + Vol+ the device just start normally,. Pressing all the three buttons device will not react at all, I tried holding these 3 buttons for 2 minutes but nothing happened.
5. No updates to fix this online currently running android 10 which means there's no android 11 patches for Nokia 2.3 to fix this issues
6. Can't root this device as almost every possibility is off.
PLEASE NOTE: THIS ANDROID 10 ROM AM USING WAS FLASHED TO THIS DEVICE BY A FRIEND MEANWHILE THE UPDATE FROM ANDROID PIE(9) TO ANDROID 10 (R) WAS DONE OFFLINE
IF THERE'S ANYWAY TO FIX THIS PLEASE ADVISE ON WHAT TO BE DONE OR IF THERE'S ANY SOFTWARE THAT CAN FIX THIS PLEASE HELP THIS IS KILLING ME .
Click to expand...
Click to collapse
Any help on this please?

Related

Trying to hard reset my xt1068 kitkat phone, didn't show dead android guy at all.

My phone was frozen when I was taking a video,
then I forced restart the phone by pressing power button until it restarted.
However, my phone stuck at the android logo for a quite long time with the screen on, so I decided to do a factory reset.
I have tried the following steps on my friend's phone as we bought exactly same phone,
and succeded at first attempt.
1, volume down + power button goes into boot options.
2, then android logo, then about 2 seconds later, dead android guy would appear.
HERE is my phone's problem:
in this step after showing android logo, my phone would vibrate once and then just gone black,just like turning off. NO DEAD ANDROID GUY showed up. Certainly would not be able to do the rest steps.
I have searched and tried so many methods that others used when they could not get into the bootloader. NONE of them succeded.
So I need help, guys.
Anyone got any ideas.
Thanks in advanced !!!
no one ?
I guess I had to bring it to the store for repairing.
bluecard said:
no one ?
I guess I had to bring it to the store for repairing.
Click to expand...
Click to collapse
1. power button + volume(down) button
then in bootloader menu:
2. volume(down) button to goto down to 'recovery'
3. volume(up) button for selecting it
Alternative I would try this:
power button + volume(down) button
then in bootloader menu stay here connect usb and use fastboot on pc.
fastboot flashall factoryImage ????
bitstra said:
1. power button + volume(down) button
then in bootloader menu:
2. volume(down) button to goto down to 'recovery'
3. volume(up) button for selecting it
Alternative I would try this:
power button + volume(down) button
then in bootloader menu stay here connect usb and use fastboot on pc.
fastboot flashall factoryImage ????
Click to expand...
Click to collapse
post in right forum........... see my signature for 5.0.2 easy installer or search for my kitkat version in xt1068 forum

SM-T810 stuck in boot loop, unable to enter in recovery or fast boot

After I tried to backup the device with TWRM, I am now stuck on the boot screen with "samsung galaxy tab s2, powered by android" screen.
I am unable to do anything: turn it off, power + volume up + home or power + volume down + home" nothing actually do anything.
The only think that change something is it to wait battery run out of energy, then the screen turn black but as soon as I plug the charger the same screen "samsung galaxy tab s2, powered by android" come again, I didn't even pushed the power button.
The device was rooted long time ago and was still with the original rom (5.0.1 or 5.1.1 I believe, i am unable to verify).
Any help is welcome!
bump,
I tried removing the back cover, now I can reboot the device more easily just removing the battery connector, before I had to wait the battery run out of power.
I trying the boot the device with the "volume up + home + power botton" pressed.
But still no luck.
Is there a way to boot an alternate rom on the device ?
it turn out that removing the back panel actually disable power or volumes buttons, so putting back the backpanel let the "power + volume down" reboot works, then shortly after doing "volume up + power + home" button let me enter odin mode, now I need a stock rom...
i recovered the device, i just had to install old version of twrp new version did brick the device
bpereira75 said:
i recovered the device, i just had to install old version of twrp new version did brick the device
Click to expand...
Click to collapse
Just got this tablet and I am about to flash a rom on it. This would be my first time, I was gonna update latest twrp and latest lineage os. You think this issue will occur to me?

Bootloader / device boot issue

Hoping someone can offer some advice.
So a few days ago my Nokia 8 stopped saving pictures (it was doing this regularly after I flashed the latest (5150) build).
I rebooted the phone only it froze on the Nokia boot logo.
It wouldn't do a forced reboot via the power button, I had to just let the power drain completely to get it to do anything.
I am trying to now flash the latest qlz but I cant get the device in to Download Mode in order to flash.
If I connect it to power (plug or usb) and it gets enough power to turn on then this is what I get:
1. Power and vol+ button held down - boots to Nokia logo, freezes
2. Power and vol- button held down - stays on bootloader unlocked warning screen
3. No buttons held down - stays on bootloader unlocked warning screen
Can anyone advise?
Its almost as if my bootloader is corrupt.
If I try option (1) I do see the device listed via
Code:
adb devices
but its shown as
Code:
NBXXXXXXX unauthorized
and since I have no filesystem access to the device I cant push the key to authorise it.
Any advice humbly appreciated as I really need access to my phone now.
Thanks
Dan
dt_matthews said:
Hoping someone can offer some advice.
So a few days ago my Nokia 8 stopped saving pictures (it was doing this regularly after I flashed the latest (5150) build).
I rebooted the phone only it froze on the Nokia boot logo.
It wouldn't do a forced reboot via the power button, I had to just let the power drain completely to get it to do anything.
I am trying to now flash the latest qlz but I cant get the device in to Download Mode in order to flash.
If I connect it to power (plug or usb) and it gets enough power to turn on then this is what I get:
1. Power and vol+ button held down - boots to Nokia logo, freezes
2. Power and vol- button held down - stays on bootloader unlocked warning screen
3. No buttons held down - stays on bootloader unlocked warning screen
Can anyone advise?
Its almost as if my bootloader is corrupt.
If I try option (1) I do see the device listed via
Code:
adb devices
but its shown as
Code:
NBXXXXXXX unauthorized
and since I have no filesystem access to the device I cant push the key to authorise it.
Any advice humbly appreciated as I really need access to my phone now.
Thanks
Dan
Click to expand...
Click to collapse
The fastest way to fix it is taking to a care centre near you. or any Nokia certified store to reflash it for you. if it's out of warranty they will probably charge you ~$20

[SOLVED] - Phone severely bricked

Hello,
I was on CrDoid 7.2. (Android 11) It was working normally.
I rebooted to recovery (TWRP 3.5), and flashed CrDroid 6.2 (Android 10).
And it bricked severely the phone. At startup, i get a message
"REV CHECK FAIL, DEVICE:9, BINARY:8 (DTB)"
I really think the situation is hopeless :
- impossible to reach download mode
- impossible reach recovery mode
- BixBy + Volume down + Power + plugging the cable doesn't work
- if the telephone stays plugged, i get a boot-loop (before the message "your bootloader is unlocked, please press power button to continue")
Any help is welcome but i really think i lost my phone. Quite painful. I'm not so rich.
I think the device tree of the ROM i flashed is mistaken.
I played i lost.
Jean
jean_michmich said:
Hello,
I was on CrDoid 7.2. (Android 11) It was working normally.
I rebooted to recovery (TWRP 3.5), and flashed CrDroid 6.2 (Android 10).
And it bricked severely the phone. At startup, i get a message
"REV CHECK FAIL, DEVICE:9, BINARY:8 (DTB)"
I really think the situation is hopeless :
- impossible to reach download mode
- impossible reach recovery mode
- BixBy + Volume down + Power + plugging the cable doesn't work
- if the telephone stays plugged, i get a boot-loop (before the message "your bootloader is unlocked, please press power button to continue")
Any help is welcome but i really think i lost my phone. Quite painful. I'm not so rich.
I think the device tree of the ROM i flashed is mistaken.
I played i lost.
Jean
Click to expand...
Click to collapse
Try the FRP Hijacker Tool. It has also happened to me that nothing worked anymore. The cell phone does not appear in the list, but still worked with the SC-01C and SoftBrick Fixer.
This also happened to me before, and I also couldn't get back to TWRP.
The error "REV CHECK FAIL, DEVICE:9, BINARY:8 (DTB)" means that the version of your device is at 9 and the binary you flashed is at 8. You can't simply downgrade Android versions on Samsung devices.
Are you sure you can't enter download mode? The key combination to enter download mode isn't what you said (" BixBy + Volume down + Power + plugging the cable doesn't work "). Try PLUGGING YOUR PHONE IN YOUR PC + VOLUME DOWN + BIXBY.
If you can access download mode, let me know so I can help you get your device unbricked.
Hello,
My mistake is that I downgraded from 11 to 10. You are probably right.
I think (but i'm not sure) that during downgrading, the sboot.bin is not anymore matching with the Device Tree and it generates a crash during flashing.
@WSC Productions : Huge thanks for the advice about the combo buttons.
@bininga59 : I'll give a try to your solution with the software FRP Hijacker Tool. But the phone is restarting itslef every 5 seconds..I wonder how a connection can be established.
Tonight will be a long night again
jean_michmich said:
Hello,
My mistake is that I downgraded from 11 to 10. You are probably right.
I think (but i'm not sure) that during downgrading, the sboot.bin is not anymore matching with the Device Tree and it generates a crash during flashing.
@WSC Productions : Huge thanks for the advice about the combo buttons.
@bininga59 : I'll give a try to your solution with the software FRP Hijacker Tool. But the phone is restarting itslef every 5 seconds..I wonder how a connection can be established.
Tonight will be a long night again
Click to expand...
Click to collapse
You can definitely go back from A11 to A10. It's the same bootloader (9). If it keeps restarting, then you should get into download mode too. Emergency off and then immediately quieter + Bixby immediately push the USB plug in.
jean_michmich said:
Hello,
My mistake is that I downgraded from 11 to 10. You are probably right.
I think (but i'm not sure) that during downgrading, the sboot.bin is not anymore matching with the Device Tree and it generates a crash during flashing.
@WSC Productions : Huge thanks for the advice about the combo buttons.
@bininga59 : I'll give a try to your solution with the software FRP Hijacker Tool. But the phone is restarting itslef every 5 seconds..I wonder how a connection can be established.
Tonight will be a long night again
Click to expand...
Click to collapse
No problemo. Try @bininga59 's advice, it'll probably work - he probably knows more than I do about Samsung ROMs tbh. If it doesn't though, let me know.
What i didn't know :
Doing Volume down + BixBy Button + plugging cable for simple electric supply
Is not the same as
Doing Volume down + BixBy Button + plugging cable linked to a computer
The cable you plug to the telephone while you are pressing volume down + BixBy must be linked to a computer.
I finally reached the Download Mode
Many thanks again

Question Force power off

Hey, I've tried (and failed) to flash TWRP on my Realme 8, and I ran into a big problem:
The device boots up into the stock ROM, but the touchscreen is unresponsive and I can't figure out a way to power off the phone. I've tried to push the power button for up to a minute, i've tried going into recovery (vol+ and power button), tried adb (the PC is unauthorized, so it didn't work). Got a USB-C adapter to plug my mouse into the phone, but it wasn't recognized.
What can i do to power it off? I believe i could reflash the stock firmware after powering it off.
Thanks for any help!
Try to force a reboot by holding power and volume down.
Right, at least 2 buttons needs to be pressed for SoC reset, try them all, you'll find the right one.

Categories

Resources