I flashed twrp, but the device got bricked, then I put the phone into fastboot then I typed "fastboot reboot fastboot" and it didn't enter that mode, it got into Redmi logo screen and then it turns off buy itself. it has that bootloop. and now I can't make it to enter to fastboot again to flash it. I can't do anything
it's a redmi 9 lancelot
Bring it to your dealer,when u cant enter nothing than its hard bricked i think(tell me if i am wrong)and as far as i know this can only be solved by a certified seller,but not 100% sure.
One thing from me to you.
Dont flash unstable software on your phone when u not know what u do,in special MTK devices.Good luck.Cheers!!!!
-CALIBAN666- said:
Bring it to your dealer,when u cant enter nothing than its hard bricked i think(tell me if i am wrong)and as far as i know this can only be solved by a certified seller,but not 100% sure.
One thing from me to you.
Dont flash unstable software on your phone when u not know what u do,in special MTK devices.Good luck.Cheers!!!!
Click to expand...
Click to collapse
I bought it on a kiosk in my country so it's gonna be harder to find someone. I thought it was gonna be a way to force to enter to fastboot, but it's impossible. I know there are some guys that can fix it by teamviewer
omg, what did u just do?
i am waiting for the official of twrp because theres a huge possibility of bricking your device.
before you do anything to your device you must read many articles on how to recover it. also read all the comments below the articles because some users have their experience installing the software.
back to the topic:
after you bricked your device you were able to go to fastboot but something went wrong because you soft bricked your device then you want to go to fastbootd.
thats was the wrong move you did to your device.
note: if theres a bootloop or something went errors after installing custom rom and you can able to access fastboot. this is the only thing you need to do, use miflashtool and install default firmware.
some users flashing the meta if theres a bootloop on their device, but for me the very secured step is flashing default firmware in his compatible tools like miflashtool.
search shas post to unbrick your device. try it since your device got bricked.
mhark.moby said:
omg, what did u just do?
i am waiting for the official of twrp because theres a huge possibility of bricking your device.
before you do anything to your device you must read many articles on how to recover it. also read all the comments below the articles because some users have their experience installing the software.
back to the topic:
after you bricked your device you were able to go to fastboot but something went wrong because you soft bricked your device then you want to go to fastbootd.
thats was the wrong move you did to your device.
note: if theres a bootloop or something went errors after installing custom rom and you can able to access fastboot. this is the only thing you need to do, use miflashtool and install default firmware.
some users flashing the meta if theres a bootloop on their device, but for me the very secured step is flashing default firmware in his compatible tools like miflashtool.
search shas post to unbrick your device. try it since your device got bricked.
Click to expand...
Click to collapse
Youre so right,nice written!!!
mhark.moby said:
omg, what did u just do?
i am waiting for the official of twrp because theres a huge possibility of bricking your device.
before you do anything to your device you must read many articles on how to recover it. also read all the comments below the articles because some users have their experience installing the software.
back to the topic:
after you bricked your device you were able to go to fastboot but something went wrong because you soft bricked your device then you want to go to fastbootd.
thats was the wrong move you did to your device.
note: if theres a bootloop or something went errors after installing custom rom and you can able to access fastboot. this is the only thing you need to do, use miflashtool and install default firmware.
some users flashing the meta if theres a bootloop on their device, but for me the very secured step is flashing default firmware in his compatible tools like miflashtool.
search shas post to unbrick your device. try it since your device got bricked.
Click to expand...
Click to collapse
I had tried that twrp before, the new thing I did was to flash a new rom, then the rom got stuck in the logo, so i asked the creater how could i solve it? He told me to flash permessive. That's why I installed twrp. But i saw twrp wasnt working. I went to fastboot to flash my software, but as you told me i went to fastbootd too. I took it to repair. I hope the can do something
try to hard reset Bro.
fastboot reboot fastboot is wrong. fastboot reboot bootloader is right.（op）
I decided to exchange it for a Redmi note 9s since I saw the development is better for that cellphone, even xiaomi mitool v2 is showing me an official twrp recovery and magisk root. Im just waiting to unlock my bootloader. btw is this a MTK device too? i heard mtk devices gets brick easily as it happened with my redmi 9
RodrySmoke said:
I decided to exchange it for a Redmi note 9s since I saw the development is better for that cellphone, even xiaomi mitool v2 is showing me an official twrp recovery and magisk root. Im just waiting to unlock my bootloader. btw is this a MTK device too? i heard mtk devices gets brick easily as it happened with my redmi 9
Click to expand...
Click to collapse
No idea why all have problems with MTK devices.
I SAY IT AGAIN AND AGAIN,YOU MUST REALY KNOW WHAT YOU DO ON THIS SOC,I HAVE SOME PHONES WITH MTK SOC AND I HAVE FLASHED AND BRICKED IT LIKE REDMI 9 NEARLY HUNDRED TIMES BUT HAVE NEVER A DEAD DEVICE AND I TEST MY THINGS AND ALL WHAT I SEE WHICH INTERESTING.
To your phone:
It have a Snapdragon 720G on board,not realy a killer but hey its Quallcom.Cheers!!!!
yeah, I do think the problem was because the twrp was bad, and I didn't flash the rom expectantly when I knew it, it was bad. that's my lesson I learnt, everytime it doesn't boot properly, I'm gonna flash the stock rom again
admin3453 said:
I flashed twrp, but the device got bricked, then I put the phone into fastboot then I typed "fastboot reboot fastboot" and it didn't enter that mode, it got into Redmi logo screen and then it turns off buy itself. it has that bootloop. and now I can't make it to enter to fastboot again to flash it. I can't do anything
Click to expand...
Click to collapse
Disable authorization and unbrick your Redmi 9
Now you can unbrick your device even if the redmi logo not coming..just go to below link and follow their steps.... https://megafon929.github.io/mtk For more information and how to do follow the below post...
forum.xda-developers.com
Related
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
just calm down and try to unlock bootloader again by (miflash_unlock) then install in computer (adb-setup-1.4.3) then keep press on power and volume down button for fastboat then open miflash (version=2017.4.25.0) and connect your phone and press refresh to see your phone on list then download India Stable Firmwares version in same thread you mention and unzip the file and unzip the result file then you will see 12 file (images/ flash_all.bat .....) and in miflash choose the file and press flash and wait... when its done your phone will work but will give account is locked just connect with wifi and write your micloud password and done .
dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
Miflash only works on an unlocked bootloader. It appears that you have a Chinese Model and you just did what was supposed to be avoided. You should get accustomed to Miflash moving forward. Never use Flash_All_Lock while cross flashing China/Global roms. You'll have to wait to unlock your Bootloader now and post that flash the China rom to get back. If any time you wish to move to the India rom, either use a twrp recovery or just use Flash_All while using the fastboot image which should eventually avoid locking the bootloader
Sent from my Redmi K20 Pro using Tapatalk
dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
1. if you can still enter fastboot mode, there is a possibility that you can do TWRP flashing again (the TWRP version must be correct so that the data on the cellphone can be read properly) / Flashing from the PC (if you are lucky, the flashing will work properly without any problem or you can bypass the bootloader locked using software or something else). [make sure ROM version must be appropriate because this is very crucial]
2. You can try using the test point method (EDL / Emergency Download Mode) [This method is usually used if your K20Pro is constrained by Hardbrick due to ARB4] , but this method requires you to open the case / body behind your K20Pro. and I cannot guarantee that the flashing process will succeed easily because in some cases if the K20Pro is detected damage / error due to ARB4, then you are required to have an Authorized Mi Account. I might be able to help you remotely, if you agree with the risks & requirements in the flashing process (I can lend my account, but it's not free).
Hi All, I did the same thing - whoever build the UI for MiFlash should be shot - why default that selection to something that will be undesirable!!?
Anyway, i tried to flash indian rom and forgot to set to Clean All, it locked the bootloader.
So i now have redmi recovery and Fastboot options only on phone.
Have tried fastboot + miflash but all options (now with Chinese rom) - says Erase Boot Error.
Tried MiAssistant + Mi PC Suite - it is not detecting the phone in either MiAssistant recovery mode nor Fastboot mode. what is weird is the phone and connector animation on phone is correctly depicting when it is plugged in/unplugged. But the PC suite isnt detecting the device.
Soft bricked - *sigh.... any help will be greatly appreciated from the community
BTW i am more worried that the phone will run out of battery and never wake up once battery drains completely as it is in bootloop into Redmi recovery and can't be turned off (someone tell me how!?) - I don't see the phone respond to charging in any state... : (
Can you still reach fastboot? If so you can unlock phone again and flash TWRP using ADB. After that boot straight into TWRP and connect it to your computer, internal SD storage should then automatically mount. Drag and drop ROM .zip into internal storage, use TWRP file manager to move it out of the data folder and do a default wipe using TWRP. Then flash .zip ROM (for example xiaomi.eu stable) and you should be back in business. Please let me know if you need any files like working recovery image and further instructions.
I had some trouble with my TWRP recovery yesterday, flashed it on unlocked bootloader with Chinese stable ROM installed, on reboot out of fastboot it boots straight into ROM and overwrites the TWRP recovery with default recovery. I fixed it by flashing recovery again, boot straight into it and flash xiaomi.eu stable, now recovery is TWRP and does not get overwritten.
hippo2s said:
Hi All, I did the same thing - whoever build the UI for MiFlash should be shot - why default that selection to something that will be undesirable!!?
Anyway, i tried to flash indian rom and forgot to set to Clean All, it locked the bootloader.
So i now have redmi recovery and Fastboot options only on phone.
Have tried fastboot + miflash but all options (now with Chinese rom) - says Erase Boot Error.
Tried MiAssistant + Mi PC Suite - it is not detecting the phone in either MiAssistant recovery mode nor Fastboot mode. what is weird is the phone and connector animation on phone is correctly depicting when it is plugged in/unplugged. But the PC suite isnt detecting the device.
Soft bricked - *sigh.... any help will be greatly appreciated from the community
BTW i am more worried that the phone will run out of battery and never wake up once battery drains completely as it is in bootloop into Redmi recovery and can't be turned off (someone tell me how!?) - I don't see the phone respond to charging in any state... : (
Click to expand...
Click to collapse
Read this https://forum.xda-developers.com/k20-pro/help/destroyed-error-fastboot-locked-t3946012
And this
https://forum.xda-developers.com/k20-pro/help/k20-pro-bricked-t3951531
You're probably going to have to open up the phone and pay $20 for someone to use their authorised account to flash an official ROM whilst remoting in to your PC.
322Reznov said:
Can you still reach fastboot? If so you can unlock phone again and flash TWRP using ADB. After that boot straight into TWRP and connect it to your computer, internal SD storage should then automatically mount. Drag and drop ROM .zip into internal storage, use TWRP file manager to move it out of the data folder and do a default wipe using TWRP. Then flash .zip ROM (for example xiaomi.eu stable) and you should be back in business. Please let me know if you need any files like working recovery image and further instructions.
I had some trouble with my TWRP recovery yesterday, flashed it on unlocked bootloader with Chinese stable ROM installed, on reboot out of fastboot it boots straight into ROM and overwrites the TWRP recovery with default recovery. I fixed it by flashing recovery again, boot straight into it and flash xiaomi.eu stable, now recovery is TWRP and does not get overwritten.
Click to expand...
Click to collapse
Some great ideas - Just tried to unlock bootloader - This device came pre-unlocked so the device is tied to the seller's account.
I have unlock permission - but unlocker say device is not bound to my account matching my assumptions - anyone know what's the best way to re-claim ownership? Especially when I can't get into ROM at all?
hippo2s said:
Some great ideas - Just tried to unlock bootloader - This device came pre-unlocked so the device is tied to the seller's account.
I have unlock permission - but unlocker say device is not bound to my account matching my assumptions - anyone know what's the best way to re-claim ownership? Especially when I can't get into ROM at all?
Click to expand...
Click to collapse
My comment was meant for OP but I hoped it would help you as well! I am personally not well informed about the Xiaomi / Redmi ownership situation when the seller unlocked the phone.. maybe you can contact them and get a corresponding password to the account, it has been the solution I have seen offered here. Maybe the emergency flash solution from Robbo.5000 works?
I just got this phone a week now and was only able to unlock and flash yesterday, I was aware of the ownership problem thanks to this forum so I bought the sealed CN version. Hope you figure it out!
Thanks guys. I am going for the Test Point solution - have made contact with the Russian tech the others did and made an appointment. I just have to pretend to be Jerry Rig before then and open her up! Fingers crossed!
322Reznov said:
Can you still reach fastboot? If so you can unlock phone again and flash TWRP using ADB. After that boot straight into TWRP and connect it to your computer, internal SD storage should then automatically mount. Drag and drop ROM .zip into internal storage, use TWRP file manager to move it out of the data folder and do a default wipe using TWRP. Then flash .zip ROM (for example xiaomi.eu stable) and you should be back in business. Please let me know if you need any files like working recovery image and further instructions.
I had some trouble with my TWRP recovery yesterday, flashed it on unlocked bootloader with Chinese stable ROM installed, on reboot out of fastboot it boots straight into ROM and overwrites the TWRP recovery with default recovery. I fixed it by flashing recovery again, boot straight into it and flash xiaomi.eu stable, now recovery is TWRP and does not get overwritten.
Click to expand...
Click to collapse
You need yo flash magisk after you flash twrp if you want to run regular miui, to prevent it from overwriting the recovery. Its the same on poco and all xiaomi phones
Mooatreides said:
You need yo flash magisk after you flash twrp if you want to run regular miui, to prevent it from overwriting the recovery. Its the same on poco and all xiaomi phones
Click to expand...
Click to collapse
Ah alright thank you for the info! This is my first ever Xiaomi / Redmi phone haha
dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
Did you flash the global rom on an existing running Chinese rom or on an empty device (formatted)? Just for myself cuz I'm not sure whether to unlock and then unable to relock. Thanks.
pungky771 said:
1. if you can still enter fastboot mode, there is a possibility that you can do TWRP flashing again (the TWRP version must be correct so that the data on the cellphone can be read properly) / Flashing from the PC (if you are lucky, the flashing will work properly without any problem or you can bypass the bootloader locked using software or something else). [make sure ROM version must be appropriate because this is very crucial]
2. You can try using the test point method (EDL / Emergency Download Mode) [This method is usually used if your K20Pro is constrained by Hardbrick due to ARB4] , but this method requires you to open the case / body behind your K20Pro. and I cannot guarantee that the flashing process will succeed easily because in some cases if the K20Pro is detected damage / error due to ARB4, then you are required to have an Authorized Mi Account. I might be able to help you remotely, if you agree with the risks & requirements in the flashing process (I can lend my account, but it's not free).
Click to expand...
Click to collapse
My k20 pro is hard bricked and i cant get fast boot or any thing it wont even come on. Assistance please
hippo2s said:
Thanks guys. I am going for the Test Point solution - have made contact with the Russian tech the others did and made an appointment. I just have to pretend to be Jerry Rig before then and open her up! Fingers crossed!
Click to expand...
Click to collapse
Could you please point me to the person you have contacted?
I'm in EDL for about two weeks now, unable to solve it by different means (seller sais 'send it back', which I'm not goong to do; S-unlock has the service unavailable, even though I've paid them and the guy I contacted there tried through TW to no avail, waiting for a 'money back' now)..
Hi Guys, I hope someone of you could help me out.
Recently a Chinese friend of mine gave me an MI 9 as a present. But unfortunately they ROM of the new phone was the CN version.
I found a way to change the ROM by doing the unlock bootloader and flashing TRWP, after that, I downloaded the MI9_Global_V9.5.30_vendor_fw_flash, went back to the Recovery and wiped the "Delvik, cache, SYSTEM and Data. When I was trying to install the rom I got an error telling me the Global rom file was corrupt and restarted the cellphone.
The problem is I am stuck in the Fastboot loop, can't access the recovery and my computer don't recognize the cellphone.
I know I ****ed it up, I was wondering if I can revert that or did I just lost a phone.
Thank you Guys.
pedrohwelerson said:
Guys,
I just solve my problem, I used MI Unlock tool and unlock the bootloader and all is good again.
I would like to thank you all for your help.
Best Regards
Click to expand...
Click to collapse
Hi,
How did you unlock your bootloader?
It asks for binding Mi account and it's not possible when your phone is bricked.
Yeah, the rule is simple. If it boots into fastboot, it can be recovered. Just flash the global you want with the MI flash tool and the fastboot file.
nudou350 said:
Yeah, the rule is simple. If it boots into fastboot, it can be recovered. Just flash the global you want with the MI flash tool and the fastboot file.
Click to expand...
Click to collapse
I'll try it later my friend, I'll come back if I succeed.
Thank you
pedrohwelerson said:
I'll try it later my friend, I'll come back if I succeed.
Thank you
Click to expand...
Click to collapse
You use Mi flash 2018.5.28
and Flash rom dev Global 9.6.27
or rom Stable Global
https://forum.xda-developers.com/showpost.php?p=80319431&postcount=3
Guys I am too stupid for this,
I flashed the fastboot global rom in my phone with MI flash but locked it in the end (can't believe I am that retard), now I believed I have bricked it for good.
Now I can't flash the correct fastboot ROM with miflash because I have locked the bootloader while trying to flash the Global ROM. I am at the fastboot loop again.
Can I do something now or I just have a expensive paper holder?
Thank you guys.
pedrohwelerson said:
Guys I am too stupid for this,
I flashed the fastboot global rom in my phone with MI flash but locked it in the end (can't believe I am that retard), now I believed I have bricked it for good.
Now I can't flash the correct fastboot ROM with miflash because I have locked the bootloader while trying to flash the Global ROM. I am at the fastboot loop again.
Can I do something now or I just have a expensive paper holder?
Thank you guys.
Click to expand...
Click to collapse
flash another official firmware on a locked bootloader BY XIAOMI TOOL V2 https://www.xiaomitool.com/v2
https://www.youtube.com/watch?v=UMkDAxiDdKs&t=10s
Here’s something VERY important before you flash or update the ROM.
1. Xiaomi Phones manufactured for Chinese market are not able to run MIUI Global ROM.
2. Xiaomi Phones manufactured for Global markets are not able to run MIUI China ROM.
We highly recommend you to buy Xiaomi Phones via official or authorized sales channels and double check the system information before flashing or updating.
hochocnua said:
flash another official firmware on a locked bootloader BY XIAOMI TOOL V2 https://www.xiaomitool.com/v2
https://www.youtube.com/watch?v=UMkDAxiDdKs&t=10s
Here’s something VERY important before you flash or update the ROM.
1. Xiaomi Phones manufactured for Chinese market are not able to run MIUI Global ROM.
2. Xiaomi Phones manufactured for Global markets are not able to run MIUI China ROM.
We highly recommend you to buy Xiaomi Phones via official or authorized sales channels and double check the system information before flashing or updating.
Click to expand...
Click to collapse
I think the problem is that he locked the bootloader after install the global ROM.
There are several user that flash global ROM in Xiaomi chinese market phones.
SDS
pedrohwelerson said:
Guys I am too stupid for this,
I flashed the fastboot global rom in my phone with MI flash but locked it in the end (can't believe I am that retard), now I believed I have bricked it for good.
Now I can't flash the correct fastboot ROM with miflash because I have locked the bootloader while trying to flash the Global ROM. I am at the fastboot loop again.
Can I do something now or I just have a expensive paper holder?
Thank you guys.
Click to expand...
Click to collapse
Hi guy,
Same thing happened to me, I felt very stupid, but it was on a MI 8 SE.
According to my experience, only there's a way to solve it and it's booting on EDL mode.
You'll need an authorized Mi account to flash the original ROM.
There's a complete guide on c . mi . com named [Guide] [All in One] MIUI Flashing Guide: Unbrick, EDL Method / Locked Bootloader, Unlock Bootloader, More, I can't post the url because I'm a new user
Best wishes!
Regards from Peru.
Jhnn11 said:
Hi guy,
Same thing happened to me, I felt very stupid, but it was on a MI 8 SE.
According to my experience, only there's a way to solve it and it's booting on EDL mode.
You'll need an authorized Mi account to flash the original ROM.
There's a complete guide on c . mi . com named [Guide] [All in One] MIUI Flashing Guide: Unbrick, EDL Method / Locked Bootloader, Unlock Bootloader, More, I can't post the url because I'm a new user
Best wishes!
Regards from Peru.
Click to expand...
Click to collapse
How were you able to get the authorized MI account? In the tutorial you mentioned, they didn't say anything about MI Account.
I'll try MItool first and let you guys know.
Thank you for the tip
hochocnua said:
flash another official firmware on a locked bootloader BY XIAOMI TOOL V2 https://www.xiaomitool.com/v2
https://www.youtube.com/watch?v=UMkDAxiDdKs&t=10s
Here’s something VERY important before you flash or update the ROM.
1. Xiaomi Phones manufactured for Chinese market are not able to run MIUI Global ROM.
2. Xiaomi Phones manufactured for Global markets are not able to run MIUI China ROM.
We highly recommend you to buy Xiaomi Phones via official or authorized sales channels and double-check the system information before flashing or updating.
Click to expand...
Click to collapse
Do you think I'll be able to use the MI TOOL V2, even in the fastboot loop.?
Thank you by the way
pedrohwelerson said:
Do you think I'll be able to use the MI TOOL V2, even in the fastboot loop.?
Thank you by the way
Click to expand...
Click to collapse
It should work, try to get the chinese rom back, unlock it again, flash twrp, give xiaomi.eu rom a try, they should work on any xiaomi phone regardless of region.
zipsu said:
It should work, try to get the chinese rom back, unlock it again, flash twrp, give xiaomi.eu rom a try, they should work on any xiaomi phone regardless of region.
Click to expand...
Click to collapse
I can't use MITOOL because the USB DEBUGGING isn't enabled, is there a way to do it in the fastboot loop?
Thank you
It should recongnize with no problems.. Just check if you have the ADB drivers and try unlocking the bootloader and then flashing the Rom with the miflash tool. Still, if you have access to fastboot, things should be fine! Don't panic hahha
nudou350 said:
It should recongnize with no problems.. Just check if you have the ADB drivers and try unlocking the bootloader and then flashing the Rom with the miflash tool. Still, if you have access to fastboot, things should be fine! Don't panic hahha
Click to expand...
Click to collapse
The MI tool v2 recognized my phone alright but it can't flash the rom coz I don't have the usd debugger enable and I can't turn on the bug to enable it since I Bricked the phone.
So I wondering if I can turn the usb debugger by other way.
Thank you
pedrohwelerson said:
Hi Guys, I hope someone of you could help me out.
Recently a Chinese friend of mine gave me an MI 9 as a present. But unfortunately they ROM of the new phone was the CN version.
I found a way to change the ROM by doing the unlock bootloader and flashing TRWP, after that, I downloaded the MI9_Global_V9.5.30_vendor_fw_flash, went back to the Recovery and wiped the "Delvik, cache, SYSTEM and Data. When I was trying to install the rom I got an error telling me the Global rom file was corrupt and restarted the cellphone.
The problem is I am stuck in the Fastboot loop, can't access the recovery and my computer don't recognize the cellphone.
I know I ****ed it up, I was wondering if I can revert that or did I just lost a phone.
Thank you Guys.
Click to expand...
Click to collapse
Read carefully and report
1. Try to hold down the buttons vol down and power, see if : fastboot devices sees it. If so XiaoMi Tool will restore it. If not do the same try recovery vol up + power. Do adb devices and see if anything shows up. Worst case you'll have to open the phone up and connect the EDL pins together and it will flash anything. I use minimal ADB and Fastboot phone plugged via USB cable into the computer and run those commands.
2. Fully bricks their device here is the unbrick factory method
https://c.mi.com/thread-1479882-1-0.html
that's connecting EDL pins with the phone case removed for a phone that doesn't boot at all
3. https://youtu.be/8mW0JzKow7E
here's the exact EDL test point required on Mi9
if you can't boot or recognize the device at all via fastboot or ADB. If this doesn't work nothing will...
But it will work, that's what the factory does. Obviously the last resort.
hochocnua said:
Read carefully and report
1. Try to hold down the buttons vol down and power, see if : fastboot devices sees it. If so XiaoMi Tool will restore it. If not do the same try recovery vol up + power. Do adb devices and see if anything shows up. Worst case you'll have to open the phone up and connect the EDL pins together and it will flash anything. I use minimal ADB and Fastboot phone plugged via USB cable into the computer and run those commands.
2. Fully bricks their device here is the unbrick factory method
https://c.mi.com/thread-1479882-1-0.html
that's connecting EDL pins with the phone case removed for a phone that doesn't boot at all
3. https://youtu.be/8mW0JzKow7E
here's the exact EDL test point required on Mi9
if you can't boot or recognize the device at all via fastboot or ADB. If this doesn't work nothing will...
But it will work, that's what the factory does. Obviously the last resort.
Click to expand...
Click to collapse
My pc identify my MI 9 alright the problem is that I can't flash anything with MItools coz I don't have enable the USB debugging and I can't enable it because of the fastboot loop.
Is there a way to enable it with a CMD command?
If no I'll have to open de device and do the EDL.
By the way thank you for your help.
REally appreciated it.
pedrohwelerson said:
My pc identify my MI 9 alright the problem is that I can't flash anything with MItools coz I don't have enable the USB debugging and I can't enable it because of the fastboot loop.
Is there a way to enable it with a CMD command?
If no I'll have to open de device and do the EDL.
By the way thank you for your help.
REally appreciated it.
Click to expand...
Click to collapse
like and share
pedrohwelerson said:
My pc identify my MI 9 alright the problem is that I can't flash anything with MItools coz I don't have enable the USB debugging and I can't enable it because of the fastboot loop.
Is there a way to enable it with a CMD command?
If no I'll have to open de device and do the EDL.
By the way thank you for your help.
REally appreciated it.
Click to expand...
Click to collapse
Op if you'd like help restoring your device to working order. I could help you through TeamViewer. If you'd like
andrew2401 said:
Op if you'd like help restoring your device to working order. I could help you through TeamViewer. If you'd like
Click to expand...
Click to collapse
I would really like it.
Thank you
pedrohwelerson said:
I would really like it.
Thank you
Click to expand...
Click to collapse
Where are you from? Asking so I can take time zone difference into account when arranging a time
Hi, I probably found the way to flash ROM if device in edl without auth account:
Download latest MiFlash and fastboot rom
Unzip rom and go to /images folder
Choose prog_ufs_firehose_sdm7150.elf
Copy it to MiFlash folder
Go to EDL and type in cmd on PC in Mi Flash directory command attached as picture.
Wait until "OKAY" appears
After this reconnect phone in EDL and start flashing ROM INSTANTLY!!!
sorry what is edl?
stauros2653 said:
sorry what is edl?
Click to expand...
Click to collapse
EDL or Emergency DownLoad Mode
What is EDL Mode and How to Boot your Qualcomm Android Device into it
Android phones and tablets equipped with Qualcomm chipset contain a special boot mode which could be used force-flash firmware files for the purpose of unbricking or restoring the stock ROM.
www.thecustomdroid.com
theartyomm said:
Hi, I probably found the way to flash ROM if device in edl without auth account:
Download latest MiFlash and fastboot rom
Unzip rom and go to /images folder
Choose prog_ufs_firehose_sdm7150.elf
Copy it to MiFlash folder
Go to EDL and type in cmd on PC in Mi Flash directory command attached as picture.
Wait until "OKAY" appears
After this reconnect phone in EDL and start flashing ROM INSTANTLY!!!
Click to expand...
Click to collapse
Your instructions say to copy "prog_ufs_firehose_sdm7150.elf" but the image refers to "prog_emmc_firehose_sdm7150.elf" (sdm vs. emmc). Is this correct? Or which should it be?
It's the same. It depends from Miui version (I took that file from 12.5)
well if this true this guy needs a major award and this post needs a lot more attention as we would finally have a way to unbrick this device for free. Let also take the opportunity to wish all the people in telegram to go to hell for taking money to use their auth account to do it for other people (yes I DO believe it should be free for all)
Did anyone successfully try this on a bricked device?
Aryapars said:
well if this true this guy needs a major award and this post needs a lot more attention as we would finally have a way to unbrick this device for free. Let also take the opportunity to wish all the people in telegram to go to hell for taking money to use their auth account to do it for other people (yes I DO believe it should be free for all)
Did anyone successfully try this on a bricked device?
Click to expand...
Click to collapse
It definitely worked in 2019. I don't if it works right now (really hope so)
if it worked in 2019 then it can have chance to still work, with the same software setup / rom. But this device did not exist in 2019....
would you mind posting exact setup details, so that it can be verified by others?
which version of miflash, which rom (did you flash a rom for redmi note 10 pro with it?)
this needs to be verified, but I have no bricked device around, and dont want to try it just for fun with running device.
Aryapars said:
if it worked in 2019 then it can have chance to still work, with the same software setup / rom. But this device did not exist in 2019....
would you mind posting exact setup details, so that it can be verified by others?
which version of miflash, which rom (did you flash a rom for redmi note 10 pro with it?)
this needs to be verified, but I have no bricked device around, and dont want to try it just for fun with running device.
Click to expand...
Click to collapse
MiFlash 2018
It worked for lavender (Redmi Note 7) when it was in EDL
I used latest MiFlash to flash Redmi Note 10 Pro fastboot Miui 12.5
so you used mi flash to flash a rn10p device, which was not in bricked state, only?
but you didnt try it in bricked stage?
edit: I mean HARDBRICK, screenoff /EDL loop. not fastboot
Yes
ah well, then you basically just flashed via fastboot, no real unbrick.
Does it work?
That can't work unless he speciefies each single step and which exact file he used. EDL has an authetication scheme and if you don't have an authorized account then it won't work.
Hey i spend today a lot of time to tried to fix my bricked Redmi Note 10 5G.
I just wanted to unroot my phone but i did something wrong.
First problem i have is the dm-verity corrupt.
So i read and tried this
https://forum.xda-developers.com/t/...g-bricked-but-has-access-to-fastboot.4366655/
Without succes i flashed the right firmware for my device many times but the dm-verity corrupt is still there and then i keeps hanging in the redmi boot logo.
But i dont know how but now i also got my bootloader locked so now i cant flash any thing.
And the dm-verity corrupt and keeps hanging on the redmi bootlogo.
So i hope some one have an solution for me and can help me and fix my phone.
u have made a common mistake. u have flashed firmware with miglash, without change default option to flash all. you have select flash all and lock. so yout phone is hard bricked. i think theres a guide to solve this. search on this forum
wetito said:
u have made a common mistake. u have flashed firmware with miglash, without change default option to flash all. you have select flash all and lock. so yout phone is hard bricked. i think theres a guide to solve this. search on this forum
Click to expand...
Click to collapse
Hey thanks for the reply
i know i made a mistake and i search and tried anything what i thougt it is maybe a solution on this forum.
Bun without any succes and because my bootloader is locked now i cant do anything in the fastboot.
i dont know how to unlocked now.
Because the bootloader is locked now i think i have the Guarantee now but if the i boot the phone the dm-verity corrupt message is still there and then it keeps hangin on the redmi logo.
So if there is no way to fix it i think go trie it to bring it to the store where i bought it 2 months ago.
i think you can solve using mtk spflash tool
look here, u can find the solution
Soft Bricked Phone
Hello, I need help. I tried to flash back to stock firmware using mi flash tool but it said error and it failed. I tried to flash again and then it didn't detect the device. It rebooted on its own and now it's stuck on bootloop with black...
forum.xda-developers.com
Hey thanks for the
wetito said:
i think you can solve using mtk spflash tool
look here, u can find the solution
Soft Bricked Phone
Hello, I need help. I tried to flash back to stock firmware using mi flash tool but it said error and it failed. I tried to flash again and then it didn't detect the device. It rebooted on its own and now it's stuck on bootloop with black...
forum.xda-developers.com
Click to expand...
Click to collapse
Hey thnks gor this guide but i cant get it found it in the sp flash tool.
I dont get my phone in the BRom mode to find it so im stuck there tried servel of times when it power of to get my phone BRom mode how dos the screen look if its in BRom mode ?
By pressing the vol + vol - and pwr button when its off id ont get it in the BRom Mode.
Also i googled the sp flash tool to download it so maybe i dont have tight one do you have mabe some links for me?
Or is there maybe a other way to fix my phone?
try this tool. seems very good. but i didn't never used. so you had to try by yourself. it have many interesting and usefull function
Home - Tool All In One
TOOL ALL IN ONE This tool support 67 different devices of some different OEMs. DOWNLOAD CHANGELOG XDA THREAD OTHERS PROJECTS
toolaio.tk
wetito said:
try this tool. seems very good. but i didn't never used. so you had to try by yourself. it have many interesting and usefull function
Home - Tool All In One
TOOL ALL IN ONE This tool support 67 different devices of some different OEMs. DOWNLOAD CHANGELOG XDA THREAD OTHERS PROJECTS
toolaio.tk
Click to expand...
Click to collapse
That also didn't work do i go to reseller today and hope i hot a new one of the gonna fix it.
Becuase the bootloader is locked again warrenty only the dm-verification message is there.
Do gonna say i updated my phone and now its not booting anymore.
Or do you or maybe some one do have an tutorial program or tool to fix it.
Download ROM for your phone and extract to desktop. Reboot to fastboot and open flashall.bat. it should run firmware through and reflash phone completely. Boot phone and on boot screen keep pressing power so phone can boot and bypass DM Verity error. Once booted reboot into fastboot again and enter fastboot oem cdms. Reboot phone and DM Verity should be gone.
passion8059 said:
Download ROM for your phone and extract to desktop. Reboot to fastboot and open flashall.bat. it should run firmware through and reflash phone completely. Boot phone and on boot screen keep pressing power so phone can boot and bypass DM Verity error. Once booted reboot into fastboot again and enter fastboot oem cdms. Reboot phone and DM Verity should be gone.
Click to expand...
Click to collapse
we repeats same anawers continuosly.i dont understand why some users decide to mod their devices, if they dont know how to use Google, and don't understand how to follow the flashing guides step by step. and finally after flashing custom rom, they ask how back to stock
wetito said:
we repeats same anawers continuosly.i dont understand why some users decide to mod their devices, if they dont know how to use Google, and don't understand how to follow the flashing guides step by step. and finally after flashing custom rom, they ask how back to stock
Click to expand...
Click to collapse
Get what you are saying, think there is at least 8 threads on same topic.
Hey thanks for the answers and the things i could tried to fix my phone.
im not a noob with rooting and flashing android phones before i do flasshong or rooting and the other stuff i always read and check the xda forum before i do.
With other android phones that i had before i made some misstakes before but like a bootloop or something else that the phone not was booting but always i can fix the phone.
So the problem what i had with my Redmi note 10 5G and not one solution that i found on xda or something that maube could fix the problem nothing could fix it.
So i a couple of week ago i went to the reseller and they send it to a repair center.
I think the coudnt also fix it because the did a boardswap.
I think if they cam fix it with a tool or software and reflashing the phone they did.
Now i wait some time before i go rooting or flashing stuff on my phone i hope there will be good twrp so thning go musch easier in the future to fix stuuf like (DM-VERITY Corruption.
twrp is not necessary. fix dm-verity is easy. the are MANY MANY MANY post where is explained how to do. root new phones is dofferent but not complicated. magisk works fine if installed following the latest guides. it's impossible damage mainbord after a root procedure. sure you didnt follow the guides with attention. i have rooted my global phone many times without problems. simply you have made a bad flash of vbmeta or product partition. you made a big mistake, cause this devices can be rooted without brick
I have redmi note 10s. I bacame bored of miui because of several bugs. So i decided to mod the device with a nice custom rom. I started the process. Because it is a mtk device, it has complicated flashing process than snapdragon devices. I entered the fastbootD mode and cleared the system by using adb command(which i dont remember). Then i flashed the custom rom. By mistake, I locked the bootloader by typing adb command fastboot oem lock. But now due to complicated case, the device is showing your system has been destroyed and when i try to force reboot it into fastboot, it still give systen destroyed error(means fastboot mode is inaccessible). Can anyone please help me to fix this issue without using edl pins? I am in a great issue
I cant go to service center as my device is out of warranty
in google there is a pc program than can unlock bootloader of mediatek devices, search for it
Bro i cant access the bootloader, so unlocking it doesnt make any difference
I want to restore the bootloader.
Manmeet_2008 said:
I have redmi note 10s. I bacame bored of miui because of several bugs. So i decided to mod the device with a nice custom rom. I started the process. Because it is a mtk device, it has complicated flashing process than snapdragon devices. I entered the fastbootD mode and cleared the system by using adb command(which i dont remember). Then i flashed the custom rom. By mistake, I locked the bootloader by typing adb command fastboot oem lock. But now due to complicated case, the device is showing your system has been destroyed and when i try to force reboot it into fastboot, it still give systen destroyed error(means fastboot mode is inaccessible). Can anyone please help me to fix this issue without using edl pins? I am in a great issue
Click to expand...
Click to collapse
Okay so first of all download "mtk client"
Than open the mtk client
It will give you instructions on how to connect your phone, take back of everything except system(super),vendor and userdata. Tap on flash tab there you'll notice a option called unblock bootloader tap on it and your bootloader will be unlocked
Bro Will this restore my bootloader or only unlock it because if it only unlocks then your help wont work.
Manmeet_2008 said:
Bro Will this restore my bootloader or only unlock it because if it only unlocks then your help wont work.
Click to expand...
Click to collapse
you dummy, you need to unlock the bootloader in orden to restore it installing the firmware with miflashtool or mtk client .
Ok bro thanks for your help
tutibreaker said:
you dummy, you need to unlock the bootloader in orden to restore it installing the firmware with miflashtool or mtk client .
Click to expand...
Click to collapse
Manmeet_2008 said:
I have redmi note 10s. I bacame bored of miui because of several bugs. So i decided to mod the device with a nice custom rom. I started the process. Because it is a mtk device, it has complicated flashing process than snapdragon devices. I entered the fastbootD mode and cleared the system by using adb command(which i dont remember). Then i flashed the custom rom. By mistake, I locked the bootloader by typing adb command fastboot oem lock. But now due to complicated case, the device is showing your system has been destroyed and when i try to force reboot it into fastboot, it still give systen destroyed error(means fastboot mode is inaccessible). Can anyone please help me to fix this issue without using edl pins? I am in a great issue
Click to expand...
Click to collapse
try some sp flashtool that come with miflashtool , turn off phone and press volume- and plug the cable in , some type of mtk download mode
Ok bro i will try tomorrow
Hello everyone, today i used the tool but when i went through the tool i saw a 'erase flash' option in mtk universal tab. Can anyone please tell that what this option is used for and ticking it will lead to any sort of issues?
Manmeet_2008 said:
Hello everyone, today i used the tool but when i went through the tool i saw a 'erase flash' option in mtk universal tab. Can anyone please tell that what this option is used for and ticking it will lead to any sort of issues?
Click to expand...
Click to collapse
dont use it, will erase all the device data and partitions turning it into a useless brick, dude, in youtube there a lots of tutos to how restore original firmware go check them first
tutibreaker said:
dont use it, will erase all the device data and partitions turning it into a useless brick, dude, in youtube there a lots of tutos to how restore original firmware go check them first
Click to expand...
Click to collapse
Ok bro thanks for telling, will not use it for flashing
Did it work is it debricked?
Manmeet_2008 said:
I have redmi note 10s. I bacame bored of miui because of several bugs. So i decided to mod the device with a nice custom rom. I started the process. Because it is a mtk device, it has complicated flashing process than snapdragon devices. I entered the fastbootD mode and cleared the system by using adb command(which i dont remember). Then i flashed the custom rom. By mistake, I locked the bootloader by typing adb command fastboot oem lock. But now due to complicated case, the device is showing your system has been destroyed and when i try to force reboot it into fastboot, it still give systen destroyed error(means fastboot mode is inaccessible). Can anyone please help me to fix this issue without using edl pins? I am in a great issue
Click to expand...
Click to collapse
You need to sSee this video,
Make sure Disconnect your phone battery then start flash
hookkrox said:
You need to sSee this video,
Make sure Disconnect your phone battery then start flash
Click to expand...
Click to collapse
You need to see the PM I've sent to you. You will find it here.
Start from BROM mode - that is always available. Then you can use mtktool to restore everything. I have an article about it on my blog, but I am not supposed to post it here... find it in my profile, or send me a PM for help.