Disclaimer:
THIS IS NOT ANDROID! Android apps(.apk) do not work here, no Play Store!
Use this at your own risk. I'm not responsible for any problem.
Prerequisites:
Installed TWRP recovery
Downloaded CyanogenMod 13 and SailfishOS zip files from below
The basic linux & android knowledge
Patience
Installation:
Copy downloaded CyanogenMod and SailfishOS zips to device
Reboot to recovery
(of course)Make a nandroid backup
Wipes
Flash CyanogenMod zip
Flash Sailfish OS zip
Reboot (First boot will take long time to show UI, it took around 6 minutes for me)
Downloads:
SailfishOS (espresso3g)
SailfishOS (espressowifi)
CyanogenMod 13 (espresso3g by Andi)
CyanogenMod 13 (espressowifi by Andi)
What Works
Display
Touch
WiFi
Audio/Video
What Doesn't Work
Bluetooth
Terminal app crashes when opened from device, you can use ssh from your computer to access the terminal.
Power Off (we need to power off from twrp)
You tell!
Optional
Get Storeman for more apps. You need to enable in Settings/Developer Tools/Remote Connection. To install download harbour-storeman 0.2.3-1.sfos3_.4.armv7hl.rpm from the link, copy it to the device using ssh (tab should be connected via usb/wifi to the computer) and run
Code:
scp /path/to/downloaded/storeman [email protected]:/home/defaultuser
Password is what is set in Settings/Developer Tools/Remote Connection. Then run
Code:
ssh [email protected]
and in that run
Code:
devel-su pkcon refresh install
devel-su pkcon install-local path-to-storeman-rpm
, same password as in Settings/Developer Tools/Remote Connection. From there you can install more apps! (There is Jolla App Store built in but this has more apps)
Source Code:
mer-hybris https://github.com/mer-hybris
espressowifi device tree https://github.com/MightyM17/android_device_samsung_espressowifi
espresso3g device tree https://github.com/CyanogenMod/android_device_samsung_espresso3g
kernel https://github.com/MightyM17/android_kernel_samsung_espresso10
device
https://github.com/MightyM17/droid-hal-espresso3g
https://github.com/MightyM17/droid-config-espresso3g
https://github.com/MightyM17/droid-hal-version-espresso3g
Sailfish OS Version: 3.4.0.24
ROM Base OS Version: CyanogenMod 13
ROM Kernel: Linux 3.0.101
For espressowifi users facing issue with touch
Fix In SailfishOS
Could you try commenting out a part in a file `sparse/var/lib/environment/compositor/droid-hal-device.conf` that is add # before
QT_QPA_EVDEV_TOUCHSCREEN_PARAMETERS="/dev/input/event0:rotate=270"
OR
Fix in twrp
The location of the file in twrp will be in /data/.stowaways, add # before
QT_QPA_EVDEV_TOUCHSCREEN_PARAMETERS="/dev/input/event0:rotate=270" in the file `sparse/var/lib/environment/compositor/droid-hal-device.conf
Mithil17 said:
Hey I just ported sfos to the tab 2 using cm13 base!
How's it?
What Works
Display
Touch
WiFi
Mostly everything (Needs to be tested a lot)
What Doesn't Work
Bluetooth
Browser (kinda laggy)
More to be tested!
Click to expand...
Click to collapse
Where’s the link to test?
HippoInWindow said:
Where’s the link to test?
Click to expand...
Click to collapse
Right now i am testing it with @aat56 if all works well will release download link in few days
How does it run, performance wise? It´s my kid´s device and Lineage is a bit laggy on it.
Mithil17 said:
Right now i am testing it with @aat56 if all works well will release download link in few days
Click to expand...
Click to collapse
Okay, waiting patiently. I would like to test a totally new OS other than mainstream custom ROMs.
zackwire said:
How does it run, performance wise? It´s my kid´s device and Lineage is a bit laggy on it.
Click to expand...
Click to collapse
Firstly this isnt Android so dont expect android apps will work otherwise it is pretty smooth, issues i'm facing are browser having touch issues, Bluetooth not working and USB issues, havent tested camera yet bluetooth will be an easy fix i hope. Other things like Jolla Store, Gallery, WiFi etc work. And about Modem (calls/sms/mobile network) i have no way to check as providers have switched to 4G while the tab has 3G
I will try to run some benchmarks if possible
HippoInWindow said:
Okay, waiting patiently. I would like to test a totally new OS other than mainstream custom ROMs.
Click to expand...
Click to collapse
Well i wont be able to work more on it due to time issue. There are some issues like usb,bluetooth etc. do you still want me to release it?
Mithil17 said:
Well i wont be able to work more on it due to time issue. There are some issues like usb,bluetooth etc. do you still want me to release it?
Click to expand...
Click to collapse
Would like to test, since mine is already dedicated to testing
HippoInWindow said:
Would like to test, since mine is already dedicated to testing
Click to expand...
Click to collapse
What device? 7 or 10 inch?
Mithil17 said:
What device? 7 or 10 inch?
Click to expand...
Click to collapse
10 inch (espressowifi). Is the build unified?
HippoInWindow said:
10 inch (espressowifi). Is the build unified?
Click to expand...
Click to collapse
I don't know xD, I have built for espresso3g and espressowifi but both were 7 inch models
Mithil17 said:
I don't know xD, I have built for espresso3g and espressowifi but both were 7 inch models
Click to expand...
Click to collapse
Can tell, but not sure how it will work, I can test for you and I will make sure to backup my current ROM (CyanogenMod 9, for nostalgia) before testing, hope this doesn’t brick my recovery XD
HippoInWindow said:
Can tell, but not sure how it will work, I can test for you and I will make sure to backup my current ROM (CyanogenMod 9, for nostalgia) before testing, hope this doesn’t brick my recovery XD
Click to expand...
Click to collapse
Well it's at your own risk! This is actually my 1st ever port so I'm very nervous
HippoInWindow said:
Can tell, but not sure how it will work, I can test for you and I will make sure to backup my current ROM (CyanogenMod 9, for nostalgia) before testing, hope this doesn’t brick my recovery XD
Click to expand...
Click to collapse
It didnt brick recovery in mine plus i kinda actually like it (only issue being no android app support)
Want me to upload?
Oh wow! you actually made a new ROM for the samsung galaxy tab 2! I am definitely gone help out by installing this and mentioning any bugs I find! Also I can't wait to see newer android versions!
KappaTheCapper said:
Oh wow! you actually made a new ROM for the samsung galaxy tab 2! I am definitely gone help out by installing this and mentioning any bugs I find! Also I can't wait to see newer android versions!
Click to expand...
Click to collapse
Newer android versions, I tried building Oreo but without success
Also this isn't android it's sailfish os
Mithil17 said:
Newer android versions, I tried building Oreo but without success
Also this isn't android it's sailfish os
Click to expand...
Click to collapse
That is linux reminding everyone.
Final build will have bluetooth intergrated?
Related
Disclaimer
Your warranty is now void. I'm not responsible for any damage or bricked devices.
Flash this ROM at your own risk!
Click to expand...
Click to collapse
Requirements
Unlocked bootloader or S-OFF
A compatible recovery, preferably TWRP
Click to expand...
Click to collapse
Flashing instructions
Download the zip to your internal storage/SD card
Do a factory reset (wipe data, cache, system)
Flash the CM zip
(Optional) Flash GApps
Reboot
Click to expand...
Click to collapse
Buglist
Headset routing (Workaround: use SoundAbout to manually route media to headset)
Encryption
Camera
VOIP Speakerphone
FM
Kernel BMS/USB driver (using a11ul kernel (not on github) until it's fixed)
Dotcase - displaced dots (I don't have the dotview case)
Click to expand...
Click to collapse
Downloads
Build #1: https://drive.google.com/file/d/0B5KRmU8P96dlNnlIYVpIS1pRY0U/view?usp=sharing
Build #2: https://drive.google.com/file/d/0B5KRmU8P96dlLUthcG01SURoY2c/view?usp=sharing
Gapps: http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
Changelog
Build #1:
Initial release
Build #2:
InCall audio fixed
Click to expand...
Click to collapse
XDA:DevDB Information
CyanogenMod 12.1 (MSM8916), ROM for the HTC Desire 510
Contributors
patrik.KT
Source Code: https://github.com/HTC-MSM8916
ROM OS Version: 5.1.x Lollipop
Version Information
Status: Beta
Created 2015-12-29
Last Updated 2015-12-29
patrik.KT said:
Disclaimer
Requirements
Flashing instructions
Buglist
Downloads
Changelog
XDA:DevDB Information
CyanogenMod 12.1 (MSM8916), ROM for the HTC Desire 510
Contributors
patrik.KT
Source Code: https://github.com/HTC-MSM8916
ROM OS Version: 5.1.x Lollipop
Version Information
Status: Beta
Created 2015-12-29
Last Updated 2015-12-29
Click to expand...
Click to collapse
Extremely excited about this, how can I help? ????
Joeyyy777 said:
Extremely excited about this, how can I help?
Click to expand...
Click to collapse
Reverse engineering?
X-77 said:
Reverse engineering?
Click to expand...
Click to collapse
What do you mean?
Ahhhh yes you're a god for doing this! I'm gonna try this out tomorrow
Do you have to have S-OFF because i don't know how to turn it off and I've looked everywhere for the method to do it for 64 bit.
Tombo12 said:
Do you have to have S-OFF because i don't know how to turn it off and I've looked everywhere for the method to do it for 64 bit.
Click to expand...
Click to collapse
You can either have an unlocked bootloader or be S-OFF. If you already have an unlocked bootloader then no S-OFF is needed.
PS: flashing boot.img from recovery works just fine if you use the twrp from twrp.me. No need to fastboot flash boot
Been using this as a daily driver for a week so I can come up with a review, incredibly fast only few bugs and force closes, but noticed apps like YouTube don't stream at all. Going to fork this in guthub later. ?
I've played with the rom (Thanks to patrik.KT for getting it working for me ) and I gotta say it's really great the response from the phone is fast and things look really smooth on the rom, except for some apps that don't work like the phone application it works but some parts are broken and google applications (Which you can flash). For the next build it would be cool to add like an option to add contacts from your SIM to your phone. Overall great job!
HunterTubeHD said:
I've played with the rom (Thanks to patrik.KT for getting it working for me ) and I gotta say it's really great the response from the phone is fast and things look really smooth on the rom, except for some apps that don't work like the phone application it works but some parts are broken and google applications (Which you can flash). For the next build it would be cool to add like an option to add contacts from your SIM to your phone. Overall great job!
Click to expand...
Click to collapse
That option is already there. Just open the Contacts app, click the three dots, click Import/export and click Import from SIM card.
You might also want to take a look at C-Apps: https://cyngn.com/c-apps
Is there any possibly fix for the camera or is it a deeper problem
InCall sound fix?
Help htc desire 510 x64 android 4.4.3 cwm error 7
Help htc desire 510 x64 android 4.4.3 cwm error 7
MadDog. said:
Help htc desire 510 x64 android 4.4.3 cwm error 7
Click to expand...
Click to collapse
Use TWRP from http://twrp.me
Room.zip htc desire 510 x64
patrik.KT said:
Use TWRP from http://twrp.me
Click to expand...
Click to collapse
Please give a link to the room.zip x64
Update.zip
TWRP instalatoin successfull))
wondefull......but the RIL Are Bug and Camera the rest are very smooth Dotview Systemui FC Headset routing to music function with the sound About app... Please FIX... i cant find the a11ul kernel for 64bit for USB Storage FIX.
MadDog. said:
Please give a link to the room.zip x64
Update.zip
TWRP instalatoin successfull))
Click to expand...
Click to collapse
Read the OP, the link to the zip is there.
Hi @patrik.KT, have you new Dev. Infos?
When is the next Release?
Do you fix INCall, Camera fix?
Thanks.
I have just installed it on my 510 from Spain and is looking really good. Going to keep on checking these days.
Thanks!
Good job OP! I'm gonna install it once the warranty will end
This ROM is currently in BETA Testing...
Downloads:
8-18-2017: https://www.androidfilehost.com/?fid=673368273298979626
8-18-2017: First BETA Release
I have found out how to make this ROM boot, use @Android-Andi's kernel, https://forum.xda-developers.com/galaxy-tab-2/galaxy-tab-2-unified/kernel-anykernel-t3484739
Known issues:
1.) Some lag
2.) SystemUI crashes after clearing all running apps on recent app switcher
3.) Camera app don't show
4.) Some things are missing from settings / sounds
5.) Some sounds are missing
secretwolf98 said:
This ROM is currently in BETA Testing...
Downloads:
8-18-2017: https://www.androidfilehost.com/?fid=673368273298979626
8-18-2017: First BETA Release
Click to expand...
Click to collapse
Tested on p3110. After the samsung logo it shows only a black screen and then reboots back to recovery.
secretwolf98 said:
This ROM is currently in BETA Testing...
Downloads:
8-18-2017: https://www.androidfilehost.com/?fid=673368273298979626
8-18-2017: First BETA Release
Click to expand...
Click to collapse
Here the same, is booting after Samsung logo in Recovery, installed with P5110.
As soon as I get back from holidays I can finally try the new 7.1.2 (I do not have wi-fi coverage). One question: Which Gapss is recommended?
ginore said:
As soon as I get back from holidays I can finally try the new 7.1.2 (I do not have wi-fi coverage). One question: Which Gapss is recommended?
Click to expand...
Click to collapse
7.1
john99ap said:
Tested on p3110. After the samsung logo it shows only a black screen and then reboots back to recovery.
Click to expand...
Click to collapse
Does anyone know how to fix this issue?
jori55 said:
Here the same, is booting after Samsung logo in Recovery, installed with P5110.
Click to expand...
Click to collapse
Does anyone know how to fix this issue?
secretwolf98 said:
Does anyone know how to fix this issue?
Click to expand...
Click to collapse
No
john99ap said:
No
Click to expand...
Click to collapse
I will try to look into this. I hope a next build will be out today or so.
john99ap said:
No
Click to expand...
Click to collapse
Kernel got corrupted. I will have this problem resolved soon!
I understand...
Porting ROMs is hell!
secretwolf98 said:
Kernel got corrupted. I will have this problem resolved soon!
Click to expand...
Click to collapse
testet with Anykernel and it seems to be all right on my p5110.
jori55 said:
testet with Anykernel and it seems to be all right on my p5110.
Click to expand...
Click to collapse
Did it go into the system?
Before we'll see bricked devices here, and also i am sure again there's a rom used as base people don't have the permissions for (yes, also for official roms you need to ask for permissions)
https://www.androidfilehost.com/?fid=961840155545572626 & https://www.androidfilehost.com/?fid=817550096634769278,
please someone fix the RIL on espresso3g - i won't do it.
And while on it:
https://www.androidfilehost.com/?fid=817550096634790962
https://www.androidfilehost.com/?fid=673368273298976929
There have been reasons not releasing any other roms yet, but people can't be patient...
i'd like to have ril fixed first, but be happy with a buggy RIL versions.
First boot takes a while, wait some minutes before you start Gapps Setupwizard, else it might crash.
And please DON'T report any bugs - i am not interested on it.
And before i foget:
Take some of your money now and make a small donation to a charity of your choice!
Edit:
No, I don't allow to use any of my work or official ROMs I maintain (official Slim, Omni, CM, Lineage and Unlegacy Android) to use as base for a port!
Every use for romporting will be reported to the moderators immediately!
Reuploading also isn't allowed and will cause legal consequences!
A shame that those trolls have been that rude to you, that you closed down the LineageOS thread @Android-Andi. I'm sorry for what they did, cause you definitely didn't deserve to be treated in such a manor. On the contrary you deserve to be carried on our hands by the whole community. Thanks again for everything you did to hold our Tab2 alive.
Thanks for sharing! Will stay on LineageOS 13 for the time being though.
Sent from my HTC U11 using XDA Labs
secretwolf98 said:
Did it go into the system?
Click to expand...
Click to collapse
Yes, see screenshot.
Installed your build, installed gapps, installed AnyKernel-2017-07-09-22-11-espresso.zip, then reboot.
jori55 said:
Yes, see screenshot.
Installed your build, installed gapps, installed AnyKernel-2017-07-09-22-11-espresso.zip, then reboot.
Click to expand...
Click to collapse
Will it work for GT-P3113, the kernel? I saw that kernel on XDA for 5xx, but I don't know if other tab 2 models are supported.
Sorry new to making ROMs for Tab 2, I make ROMs for tab 4.
Android-Andi said:
Before we'll see bricked devices here, and also i am sure again there's a rom used as base people don't have the permissions for (yes, also for official roms you need to ask for permissions)
https://www.androidfilehost.com/?fid=961840155545572626 & https://www.androidfilehost.com/?fid=817550096634769278,
please someone fix the RIL on espresso3g - i won't do it.
And while on it:
https://www.androidfilehost.com/?fid=817550096634790962
https://www.androidfilehost.com/?fid=673368273298976929
There have been reasons not releasing any other roms yet, but people can't be patient...
i'd like to have ril fixed first, but be happy with a buggy RIL versions.
First boot takes a while, wait some minutes before you start Gapps Setupwizard, else it might crash.
And please DON'T report any bugs - i am not interested on it.
And before i foget:
Take some of your money now and make a small donation to a charity of your choice!
Edit:
No, I don't allow to use any of my work or official ROMs I maintain (official Slim, Omni, CM, Lineage and Unlegacy Android) to use as base for a port!
Every use for romporting will be reported to the moderators immediately!
Reuploading also isn't allowed and will cause legal consequences!
Click to expand...
Click to collapse
This ROM in my post is compiled from https://wiki.lineageos.org/devices/espressowifi/build, and LineageOS 14.1 sources on GitHub.
secretwolf98 said:
This ROM in my post is compiled from https://wiki.lineageos.org/devices/espressowifi/build, and LineageOS 14.1 sources on GitHub.
Click to expand...
Click to collapse
Ok, sry have seen my "porting friend" posting here and thought it's a port too because nothing's mentioned in OP.
I'll PM you next days or you can contact me on Hangouts (I am sure you'll find out how to find me)
Android-Andi said:
Ok, sry have seen my "porting friend" posting here and thought it's a port too because nothing's mentioned in OP.
I'll PM you next days or you can contact me on Hangouts (I am sure you'll find out how to find me)
Click to expand...
Click to collapse
That's alight.
You want MIUI 9? There are still no fancy threads for MIUI 9 on osprey. I tried to port it. Now people should test it!
Installing is usual - MAKE A BACKUP OF YOUR OLD ROM, Wipe, Install the new zip. GApps are included Out-of-the-Box.
After installing:
1. Tell if it boots
If it doesn't: say what SKU is your phone (for example mine is XT1441)
2. Tell us what works and what doesn't
3. If at least calling works and Wi-Fi works, you can try using it as a daily driver. Tell us how battery goes.
Do all that in the "Reviews" tab on the top of this thread.
I'm going to try it out, too. And I'm going to tell you what happened.
Download the ROM through the "Downloads" tab.
==================================================
UPDATE: Base Android changed to Marshmallow by requests from this thread and for better compatibility.
XDA:DevDB Information
MIUI9, ROM for the Moto G 2015
Contributors
nicolasmart, jhenrique09, CyanogenMod (formely Lineage)
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2017-10-26
Last Updated 2017-10-29
Reserved
Changelog:
2017.10.29 - Test4 (Lollipop):
* Reverted base to Lollipop. Looks like even Mi 4 isn't compatible with our device. I'm going to upgrade back to Marshmallow or Nougat when official MIUI 9 comes out.
* We have some progress - the kernel now works and the phone starts booting. It hangs on the boot animation. Please send logcats. I will look through mine, too.
2017.10.28 - Test3 (Marshmallow):
* Switched base to Marshmallow
* Also not booting because of the wrong architecture.
2017.10.26 - Test2 (Lollipop):
* Flashing but not booting
2017.10.26 - Test1 (Lollipop):
* Initial Release
* Not flashing
Does Gapps are included or have to download seperately and if seperately then which one?
Apurba99 said:
Does Gapps are included or have to download seperately and if seperately then which one?
Click to expand...
Click to collapse
GApps are included out of the box, so don't worry about that. Again, don't plan to use this as a daily driver. Just test it and tell if it works.
If there is some problem ,then its wouldn't hard brick my device, right?I have only one phone ?
Apurba99 said:
If there is some problem ,then its wouldn't hard brick my device, right?I have only one phone
Click to expand...
Click to collapse
Don't worry! It won't hard brick it. You will just need to reflash your ROM with something stable, like Lineage OS, for example.
Ok then, I'll flash it ASAP
It will be nice if there is marshmallow or Nougat.
Flashing it ASAP :good:
mg_jishad said:
It will be nice if there is marshmallow or Nougat.
Click to expand...
Click to collapse
I'm sorry. In MIUI it doesn't matter that much what Android version are you running. And I don't think Lollipop is obsolete. I just chose it because Redmi 2 runs our chipset and it's the easiest device to port from.
UPDATE: Zip File doesn't flash. Will fix ASAP.
Flashed but Stuck on boot logo .. Waited for around 10mins.
nicolasmart said:
You want MIUI 9? There are still no fancy threads for MIUI 9 on osprey. I tried to port it. Now people should test it!:
Click to expand...
Click to collapse
Flashed but dont pass on boot logo
Project Updated!
Using Marshmallow port from Redmi 3S. Edited kernel. Try it out and see if it boots. There must be quite some bugs. But I want to see if it boots.
Go ahead and try it out if you have already downloaded another stable ROM like Lineage to flash after you try this one.
nicolasmart said:
Project Updated!
Using Marshmallow port from Redmi 3S. Edited kernel. Try it out and see if it boots. There must be quite some bugs. But I want to see if it boots.
Go ahead and try it out if you have already downloaded another stable ROM like Lineage to flash after you try this one.
Click to expand...
Click to collapse
Great
rahul9999 said:
Great
Click to expand...
Click to collapse
Can you try it out, please? My phone is currently not with me.
nicolasmart said:
Can you try it out, please? My phone is currently not with me.
Click to expand...
Click to collapse
I would like to be test this but as i don't want to switch any ROM for sometime.. will let you know if possible for me to test
nicolasmart said:
Project Updated!
Using Marshmallow port from Redmi 3S. Edited kernel. Try it out and see if it boots. There must be quite some bugs. But I want to see if it boots.
Go ahead and try it out if you have already downloaded another stable ROM like Lineage to flash after you try this one.
Click to expand...
Click to collapse
Where is the download tab?
Hunimix said:
Where is the download tab?
Click to expand...
Click to collapse
Use this link: #Download tab
...or just look at the top of this thread.
nicolasmart said:
Use this link: #Download tab
...or just look at the top of this thread.
Click to expand...
Click to collapse
I do not appear in the top, so my question, I'm already downloading from the #download tab, ty
Hunimix said:
I do not appear in the top, so my question, I'm already downloading from the #download tab, ty
Click to expand...
Click to collapse
Hmmm... interesting... I should put the downloads tab link in the first post then.
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void. Knox 0x1.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
WARNING:
If you find any bugs, bring a logcat. Logs are helpful....
If your problem cannot be reproduced without using Root modules or Xposed, don't report it! The same goes with custom kernels.
Not working:
Camera or Video recording
Encryption not working in TWRP
Data
Prerequisites:
The latest version of TWRP. This is an absolute requirement.
Your device (it better be a Galaxy Tab 3 7.0 (Sprint)).
How to flash this ROM:
So you really want to do this, huh? That must mean you accept the risks specified in the disclaimer, and that you read the warning.
From other custom ROMs (this assumes you already unlocked your bootloader a long time ago):
Download the zip file for your device (link is below).
Reboot into TWRP (Volume Up + Home + Power or Advanced Restart).
Make a backup (optional).
Perform a factory reset (Wipe > Swipe to Factory Reset).
Flash the ROM you just downloaded.
Flash OpenGApps for Android 8.1 if you want Google services (optional).
If you want root, flash Magisk or SuperSU
Reboot and proceed normally with installation.
Download links:
TWRP:https://drive.google.com/open?id=1SobBqwJ4blOBUwJRQhRbSngqli-GQOd4
Rom: https://drive.google.com/open?id=1-KmqmWPjX1CcS31llPttYkJkG61uY7zC
OpenGApps 8.1: https://drive.google.com/open?id=1te8P364JcVnlItY-r74a8CbkP4jAj85Q
Source code:
LineageOS on GitHub
Credits:
The LineageOS Team
TeamWIn
Special Thanks: @DarkFrenzy @captainthrowback @Dees_Troy @noahajac @LuK1337
Anyone i forgot to mention
Very Special Thanks: @arco as alot of my changes are based upon his Github upstream changes on serranoltexx, expecially on RIL. Without this project would not be possible.
Version Information:
ROM OS Version: Android 8.1 Oreo
Kernel Version: Linux 3.4.x
Sent from my SM-T217S using Tapatalk
IThinkALot said:
Android Oreo on a 5 year old device? You're awesome dude.
Sent from my Xiaomi Redmi Note 4 using XDA Labs
Click to expand...
Click to collapse
Thanks. Haha it wasn't a easy task. Took me about 2 months of tinkering and playing with it. I am personally using the device at the moment.
Sent from my SM-T217S using Tapatalk
slashez said:
That’s so impressive. I don’t want to sound unappreciative but can you please do it for the tab 3 8.0. [emoji1391]*[emoji1391]*[emoji1391]*[emoji1391]*
Click to expand...
Click to collapse
Thanks. Problem with that is I don't have the device on hand, so that's problematic in building and testing.
Sent from my SM-T217S using Tapatalk
sscsps said:
Wow dude! Awesome work!
---------- Post added at 08:40 AM ---------- Previous post was at 08:40 AM ----------
When will you be sharing your trees?
Click to expand...
Click to collapse
Thanks. Ya I was going to try to get the camera working before I dropped my self made trees.
majorkid said:
Thanks for the ROM ..
Click to expand...
Click to collapse
Welcome
The0919 said:
Can I flash this on my T210R Tab 3?
Click to expand...
Click to collapse
Different hardware
wtjra70 said:
You sir has restored my love in this little bugger the SM-217S. I found it a couple of months back hiding in a drawer. I figured I'd use it when I'm watching YouTube in bed. I've been on Resurrection Remix 7.1 and could believe it was so slow. Now this thing is has new life in it again.
Click to expand...
Click to collapse
Welcome.
Robsr said:
since i.m no technician or a computer whizkid i.ve to look up on these kind of threads for a good rom
so i dare asking you if you are willing to make a rom for a Samsung Tab 3 lite SM-T110. My wife uses this and its very, very slow on the stock rom.
thnx a lot
rob
out of the Hague Netherlands.
Click to expand...
Click to collapse
Problem is different hardware. And I don't have that tab on hand to debug issues.
Sent from my SM-T217S using Tapatalk
Thank you for cooking this ROM and interest in making the camera work. I know you use it as WiFi tablet only. I still can't get Sprint data working as was the case with earlier serranoltexx-based builds.
Looking forward to any updates you may provide. Best wishes...
Version Information:
ROM OS Version: Android 8.1 Oreo
Kernel Version: Linux 3.4.x
Click to expand...
Click to collapse
residentorca said:
Thank you for cooking this ROM and interest in making the camera work. I know you use it as WiFi tablet only. I still can't get Sprint data working as was the case with earlier serranoltexx-based builds.
Looking forward to any updates you may provide. Best wishes...
Click to expand...
Click to collapse
Can you take some logs when you insert your sim, and try to toggle data?
lazumo said:
I'm guessing a kernel for Lineage OS 15.1 wouldn't work with Lineage OS 14.1 ? I'm not ready to make the leap onto Oreo yet, but I'll be damned if I can find a good, non-stock kernel for LOS 14.1 on my SM-T217S. I've tried repeatedly to compile my own from all the sources that are readily available, but the OS just hangs saying that Lineage OS is starting... and that's just the stock source with the specific commits for this device. I can't figure out if it's the toolchain I'm using or what.
Thanks for the time and effort that you've put into this, though. Having begun to try to do this kind of thing myself has really given me a new appreciation for the work that you and other XDA members do. Hopefully one day I'll be compiling my own ROM builds for y'all too.
Click to expand...
Click to collapse
Kernel source compiles based upon device. The kernel from 14.1 or 15.1 should be interchangeable. If the ROM boots to the initial screen then its probably not a kernel issues but another issue why it won't boot. You have to take a adb log and look at the output to determine why its hanging.
residentorca said:
With SIM inserted I see a persistent notification atop the notification panel that says No SIM card - No service. When I remove and re-insert the SIM, the message remains. Because of this I am unable to toggle cellular data on and off using the status bar Mobile data switch or in Settings-Mobile Network. All items are greyed out under Settings-Mobile Network. When I access the "Testing" menu by dialing *#*#4636#*#* and then select Tablet Info I am unable to Enable Data Connection. I recall that after the first boot after flashing your ROM the Cellular setup wizard never started even after removing and reinserting the SIM card. I don't think this is relevant but I did not flash any GAPPS package. I did flash the file 2016.02.08 Freedompop_APNs_fix.zip which I obtained from a different thread and has worked on other ROMs. My SIM is for FreedomPop which uses the Sprint data network. I did collect logcat and Bug Report files to share with you if you think they may help. Let me know if I may provide any additional information. Thanks!
Click to expand...
Click to collapse
Thanks I will take a look at the logs. Ya I don't have a sim to insert maybe I can find a friend who has a old one lying around. Did the sim show inserted on my previous build?
residentorca said:
Thanks, the SIM did not show on the previous build either.
Click to expand...
Click to collapse
OK cool. I will work on getting that sorted. Wish I knew that before lol. Currently trying to get the camera to work. Thanks though.
I have this exact tablet version, but does this work for serranolte?
Nice job on the rom too bad i dont have the right device model to test but anyways its awesome to see development for samsung tablets especially oreo
TurnaboutSavage said:
I have this exact tablet version, but does this work for serranolte?
Click to expand...
Click to collapse
It might work if you flashed a custom kernel but the blobs are slightly different so idk the answer. It would be up to you, I can't provide support as I don't have that device.
JT1510365 said:
Nice job on the rom too bad i dont have the right device model to test but anyways its awesome to see development for samsung tablets especially oreo
Click to expand...
Click to collapse
Thanks, I figured I would give it a try, this is my first build for this device specific.
Can i flash this on T210??
Voyage Maker said:
Can i flash this on T210??
Click to expand...
Click to collapse
Different hardware.
Sent from my SM-T217S using Tapatalk
residentorca said:
Thanks, the SIM did not show on the previous build either.
Click to expand...
Click to collapse
So I been looking at the radio files I used. I am thinking they would work. But they were made for a different device but do work with serranotexx which I assumed would be work with this device. Obviously I believe this is the issue, I will try to do a rebuild semi soon to see if I can sort that out. The hardware is slightly different between the s4 and this.
Sent from my SM-T217S using Tapatalk
Does the Rom work on sm t110?
user325 said:
Does the Rom work on sm t110?
Click to expand...
Click to collapse
Different hardware.
Sent from my SM-T217S using Tapatalk
Not Working
It's not working for me, I'm on the Samsung galaxy tab SM-T217S (Sprint). When I try to flash it with TWRP, it says:
Installing zip file
Checking for MD5 file...
Skipping MD5 check: No MD5 file found
Warning: No file contexts
E3004: This package is for device: lt02lte, lt02ltespr, lt02ltetmo; this device is .
Updator process ended with ERROR: 7
Error installing zip file
Updating partition details. . .
. . .done
Edit: FIXED, I edited the file and removed the version verification.
Justsnoopy30 said:
It's not working for me, I'm on the Samsung galaxy tab SM-T217S (Sprint). When I try to flash it with TWRP, it says:
Installing zip file
Checking for MD5 file...
Skipping MD5 check: No MD5 file found
Warning: No file contexts
E3004: This package is for device: lt02lte, lt02ltespr, lt02ltetmo; this device is .
Updator process ended with ERROR: 7
Error installing zip file
Updating partition details. . .
. . .done
Am I doing something wrong?
Click to expand...
Click to collapse
Reread the first page. Latest version of twrp is an absolute requirement.
Woodbuger said:
Reread the first page. Latest version of twrp is an absolute requirement.
Click to expand...
Click to collapse
I was on the latest version of TWRP.
LineageOS 14.1
Credits:Samsung Galaxy Note 10.1 - Samsung Electronics
Android 7.1.2 - Google Inc.
@lirokoa - Making the device source code & kernel source code
Requirements:twrp-3.0.2-0-n801x.img
Questions:Why isn't the keyboard showing?Answer: You have to go to Settings --> Language & Inputs --> AOSP Keyboard --> Make sure to set as 'Always show' or something like that.
Download:https://www.androidfilehost.com/?w=files&flid=283165
Sources:
Code:
LineageOS 14.1: [url]https://github.com/LineageOS/android/tree/cm-14.1[/url]
Device source code: [url]https://github.com/lirokoa/android_device_samsung_n8013/tree/cm-14.1[/url]
Device kernel source code: [url]https://github.com/lirokoa/android_kernel_samsung_n80xx/tree/cm-14.1[/url]
ROM status:Testing
- Secretwolf98
Is this rom used for the n8000 model? since the download file only puts n8013
Enviado desde mi SM-G950F mediante Tapatalk
kiran1901 said:
Is this rom used for the n8000 model? since the download file only puts n8013
Enviado desde mi SM-G950F mediante Tapatalk
Click to expand...
Click to collapse
I haven't made it for the n8000, because I don't own the 3g to test things on. But, if I can have a tester, I can make one.
This build is fantastic. Working like a charm. Definitely breathes new life into the Note.
Thanks for all the help. I'd be willing to test newer builds for the 8013 if need be. It's still my daily driver, but I'm always looking forward to testing new builds on it.
SB1990 said:
This build is fantastic. Working like a charm. Definitely breathes new life into the Note.
Thanks for all the help. I'd be willing to test newer builds for the 8013 if need be. It's still my daily driver, but I'm always looking forward to testing new builds on it.
Click to expand...
Click to collapse
Your welcome. I have a ROM I'm testing for this device at the moment. Future updates for this ROM will be happening.
SB1990 said:
This build is fantastic. Working like a charm. Definitely breathes new life into the Note.
Thanks for all the help. I'd be willing to test newer builds for the 8013 if need be. It's still my daily driver, but I'm always looking forward to testing new builds on it.
Click to expand...
Click to collapse
Here is a CM 14.1 build I have out, but I won't be updating CM 14.1
I will be updating LineageOS 14.1, tho. https://androidfilehost.com/?w=files&flid=283169
secretwolf98 said:
Here is a CM 14.1 build I have out, but I won't be updating CM 14.1
I will be updating LineageOS 14.1, tho. https://androidfilehost.com/?w=files&flid=283169
Click to expand...
Click to collapse
All good. I can wait until the next LOS 14.1 build.
secretwolf98 said:
I haven't made it for the n8000, because I don't own the 3g to test things on. But, if I can have a tester, I can make one.
Click to expand...
Click to collapse
I'm happy to be a tester n8000
secretwolf98 said:
LineageOS 14.1
Credits:
Samsung Galaxy Note 10.1 - Samsung Electronics
Android 7.1.2 - Google Inc.
@lirokoa - Making the device source code & kernel source code
Requirements:
twrp-3.0.2-0-n801x.img
Questions:
Why isn't the keyboard showing?
Answer: You have to go to Settings --> Language & Inputs --> AOSP Keyboard --> Make sure to set as 'Always show' or something like that.
Download:
https://www.androidfilehost.com/?w=files&flid=283165
Sources:
ROM status:
Testing
- Secretwolf98
Click to expand...
Click to collapse
I'm glad you have the time to continue what I have started since I don't have the time anymore. Good work
cikenkari said:
I'm happy to be a tester n8000
Click to expand...
Click to collapse
I'll make one later this week or this weekend.
Here is a new ROM test build.
I don't plan on updating this new ROM, so if you decide to download this new ROM, go ahead.
https://www.androidfilehost.com/?w=files&flid=283252
lirokoa said:
I'm glad you have the time to continue what I have started since I don't have the time anymore. Good work
Click to expand...
Click to collapse
lirokoa, your build from last year was great and convinced me to keep my Note for a lot longer. Lots of appreciation for what you did.
Hey sw98, is there a quick way to flash a recovery img without root? I used, I believe, TWRP 2.8.7.0 for flashing your build and it worked perfectly. I'm not rooted, so cannot use the TWRP app from the Play Store, and for the life of me only remember flashing the recovery wayyyy back in the day with Odin.
EDIT: I ask because I wouldn't mind being on the newer version of TWRP that you posted.
Awesome!
Thanks your new Rom, LineageOS 14.1 work fine on N8010.
It seems fixed "settings has stopped" dialog when every boot.
Currently found issue:
-When start stock file manager show "MTP.....host has stopped". I disable it, no errors happened.
-Spen cursor not working.
-Visual touches not working. (In developer options) But I can see it working in the video, using AZ Screen Recorder.
-When open camera first time, device reboot. o_o I disable it and use Camera ICS, though I rarely use tablet camera.
lirokoa said:
I'm glad you have the time to continue what I have started since I don't have the time anymore. Good work
Click to expand...
Click to collapse
Thank you providing Roms a long time. : D :good:
cikenkari said:
I'm happy to be a tester n8000
Click to expand...
Click to collapse
I will release the N8000 build on Saturday (USA time).
unknownman820601 said:
Thanks your new Rom, LineageOS 14.1 work fine on N8010.
It seems fixed "settings has stopped" dialog when every boot.
Currently found issue:
-When start stock file manager show "MTP.....host has stopped". I disable it, no errors happened.
-Spen cursor not working.
-Visual touches not working. (In developer options) But I can see it working in the video, using AZ Screen Recorder.
-When open camera first time, device reboot. o_o I disable it and use Camera ICS, though I rarely use tablet camera.
Thank you providing Roms a long time. : D :good:
Click to expand...
Click to collapse
In terms of the S Pen and the visual touches, I would not know what to do specifically about those (since I don't bother about them personally).
The "MTP Host has stopped" error message can crop up from time to time (I have seen it when I delete apps from the Play Store), but I wouldn't worry too much about it. It has never given me any issues.
For the camera issues you are having - the stock camera that comes with LOS reboots the device when you open it. Have you tried installing the Google Camera (whether from the Play Store or the APK)? It should work (I don't use the Note's camera at all, but I believe I have installed the app on the tablet on the past when using LOS 14.1).
Let me know.
I don't know MTP Host's function, but i don't like his existence,
so i disable it, All the file transfer still work fine (upload, download, install, etc),
No error message have occurred so far.
others issues not important for me too,
just report possible issues,
thx your reply.
Wow is this the start of a new dawn for my old friend galaxy note ? I really wanted Nougat to continue and be stable for this device.
secretwolf98 said:
I'll make one later this week or this weekend.
Click to expand...
Click to collapse
Thanks alot - i´ll give it a try with my oooold n8000
Awesome! Some updates going for this stone age old device.
I don't assume you have any plans to work on Oreo 8.1? While Android GO might be awesome in this device, getting the old hardware running might be impossible.