help me NO command error - Samsung Galaxy J6+ ROMs, Kernels, Recoveries, & Ot

I recently tried to install a custom ROM in my samsung j6+ but halfway through it my PC turned off.
Then the problem starts i decided to reboot my phone but it shows this error "No command" " #Reboot recovery cause is [[check_bootmode]RebootRecoveryWithKey]#
Block-based OTA
Supported API: 3
# MANUAL MODE v1.0.0#
E:Failed to mount / cache: Invalid argument
The error message keeps appearing for just a fraction of a second then disappear and appear again
I tried to go to recovery mode but no luck i cant get to it
I drained the battery to turn off the device then go download mode but after get to it, it also keep restarting
help me please. thank you

You can unbrick your device by using Odin.
Follow this guide here to unbrick your phone whether it's hard or soft bricked.
You can download your stock ROM from this site.
Also Odin available here.
Goodluck.

XDHx86 said:
You can unbrick your device by using Odin.
Follow this guide here to unbrick your phone whether it's hard or soft bricked.
You can download your stock ROM from this site.
Also Odin available here.
Goodluck.
Click to expand...
Click to collapse
sir samsung j6+ has a not removable battery do you have any other ways?

computerxrojas1995 said:
sir samsung j6+ has a not removable battery do you have any other ways?
Click to expand...
Click to collapse
Simply disconnect your device and turn it off then wait couple of minutes (10 minutes at least) to remove residual charge.

Related

i9001 bricked?

Hi guys, i gonna tell you about how my i9001 was stuck in a bootloop. Maybe you could help me. I'm sick of it.
Cause: I installed cm10 and cwm5 or 6 as recovery and upgrade my device using Ota Updater. When I restarted my i9001, it got stuck in a bootloop.
What my i9001 can display: It can access to rampdump mode and download mode. In case I try to turn on my i9001 or access to recovery mode the Samsung logo/word is shown twice and stops showing anything else. It often gets stuck showing the typical grey battery flat (with a loading stopped) and the black screen alternately. This is caused when I a disconnect the USB cable from my computer/laptop.
Attempts: i've tried everything except for the right solution. Lots of forum threads and nothing works for me. I've tried:
1.- Boot_loader for device boot.
2.- I've flashed an stock rom: XXKQP, and 2 more: BVKPC y XXKQ1. Each one are official.
3.- And then recovery-clockwork-5.5.0.4 and -6.0.1.2.
4.- I've tried, then, flashing feamodrecovery 1.2.
5.- Nothing works for me.
I've been using Odin 4.43. AriesVE in OPS section and when flashing these roms: one package. For recovery packages: one package and pda (I tried these two options).
I can't reach at recovery mode. Any help would be greatly appreciated. Greetings!
have a look here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1
When phone boots there's nearlz always a solution
Sent from my GT-I9001 using xda app-developers app
slow--welder59, any of these solutions helped me. I tried with any other combination of combos but nothing happened. I didn't know to use adb method. I installed adb drivers but it didn't detect my device. When I entered to download mode and pressed Install (in the program) tried to download something but it stopped.
Any suggestion?
Can anyone help me? I want to exhaust all possible options.
zerohhorez said:
Can anyone help me? I want to exhaust all possible options.
Click to expand...
Click to collapse
What happens when you try to format data from recovery...?
If you get some errors, write them here...
If everything goes well, then it is not what im expecting (in that case problem is probably easier to solve)...
sava92ns said:
What happens when you try to format data from recovery...?
If you get some errors, write them here...
If everything goes well, then it is not what im expecting (in that case problem is probably easier to solve)...
Click to expand...
Click to collapse
The problem is just this. I cannot go to recovery mode. Just shows Samsung twice and powers off.
zerohhorez said:
The problem is just this. I cannot go to recovery mode. Just shows Samsung twice and powers off.
Click to expand...
Click to collapse
Can you open 'Download mode'?
sava92ns said:
Can you open 'Download mode'?
Click to expand...
Click to collapse
Yes I can, and that's the reason why I don't give up hope. However, I've tried installing some stock roms and recoveries and nothing worked for me.
Try one of the following (or both even if your desperate):
http://forum.xda-developers.com/showthread.php?t=1922505 (broodROM RC5 download link) [recomended]
http://broodplank.net/old/flashsamsungi9001.php (skip chapter 5 as it doesn't apply) [if that doesn't work]
edit:: USB Drivers: http://forum.xda-developers.com/showthread.php?t=961956
stepie22, thank you for your help. Nothing worked for me.
First link: another typical manual for installing a stock rom via Odin. During the process my device powered off. It was supposed to reboot. After the process ended, i disconnected it from PC and its screen showed a grey empty battery (with a loading in the middle) and word "Samsung" alternatively.
Second link: this was the solution for my first brick. Then, my device showed this yellow triangle. This second time is annoying me. I haven't found any solution to change, at least, the behaviour of my device.
Any other different solution? Thnks guys.
zerohhorez said:
Then, my device showed this yellow triangle.
Click to expand...
Click to collapse
See this ... if that is the triangle, find that part on the wiki page.
Maybe your device got the eMMC Bug?
Normally your Device would be hardbricked if you "over" flashed.
If nothing works out try this:
Have a look in this thread:
http://forum.xda-developers.com/showthread.php?t=2224029
Download CWM Recovery 6.0.2.8 ODIN Package and flash it in "Download Mode" the regular way (AriesVE.ops and onepackage).
Then maybe you are able to enter Recovery Mode again...
This might be not your problem, but you could give it a try:
Some people had issues with rebooting in recovery, so there is a fix in this post
http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
Hopefully one helps you!
Greetings

[Q] Bricked Phone With Safestrap Recovery

I'm a newbie on XDA so pardon anything that I might do "wrong"
So I was using safestrap recovery to play around with some custom roms, and I was going to switch to a new rom so I thought I was going to delete everything from Rom-Slot 1, but actually ended up going to the section where you can check off everything you want to delete from the the rom. I ended up checking all except micro SD card, and ended up deleting all the data from the stock rom by accident. I tried restarting the phone but all I see now is a stuck "Galaxy Note 3" on boot-up.
I've tried using Odin (with the BL AP CP CSC and PIT files ) to flash back and Oneclickbin.exe, but none work. They all give me a fail message shortly (or a couple minutes) after I press start
Additional notes:
Rooted with kingo root
I got the OTA update on the stock rom (The one with the black stock keyboard)
Please Help!!!
How do I fix this?!?!
UPDATE: Problem not fixed, but when I try to turn on the device, it now says:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I plugged my phone in the computer and kies can't connect to the device....
XerorebornX said:
I'm a newbie on XDA so pardon anything that I might do "wrong"
So I was using safestrap recovery to play around with some custom roms, and I was going to switch to a new rom so I thought I was going to delete everything from Rom-Slot 1, but actually ended up going to the section where you can check off everything you want to delete from the the rom. I ended up checking all except micro SD card, and ended up deleting all the data from the stock rom by accident. I tried restarting the phone but all I see now is a stuck "Galaxy Note 3" on boot-up.
I've tried using Odin (with the BL AP CP CSC and PIT files ) to flash back and Oneclickbin.exe, but none work. They all give me a fail message shortly (or a couple minutes) after I press start
Additional notes:
Rooted with kingo root
I got the OTA update on the stock rom (The one with the black stock keyboard)
Please Help!!!
How do I fix this?!?!
UPDATE: Problem not fixed, but when I try to turn on the device, it now says:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I plugged my phone in the computer and kies can't connect to the device....
Click to expand...
Click to collapse
Are you using Kies 3 or just the regular Kies?
Try putting the phone in download mode yourself, then plug into kies 3
Still no
Are you using Kies 3 or just the regular Kies?
Click to expand...
Click to collapse
I'm using Kies 3 and tried emergency recovery. It didn't work. Kies 3 actually doesn't even recognize my note 3 as a supported device, but I attempted the recovery anyway. I can get to step in the recovery where the recovery window on my computer says, "Do Not disconnect your device from the PC" but the loading bar never goes past 0%, then after a while it'll give me another fail message...
Try this
http://forum.xda-developers.com/showthread.php?t=2559715
XerorebornX said:
I'm using Kies 3 and tried emergency recovery. It didn't work. Kies 3 actually doesn't even recognize my note 3 as a supported device, but I attempted the recovery anyway. I can get to step in the recovery where the recovery window on my computer says, "Do Not disconnect your device from the PC" but the loading bar never goes past 0%, then after a while it'll give me another fail message...
Click to expand...
Click to collapse
Try this my friend (Same as above post sorry)
XerorebornX said:
I'm using Kies 3 and tried emergency recovery. It didn't work. Kies 3 actually doesn't even recognize my note 3 as a supported device, but I attempted the recovery anyway. I can get to step in the recovery where the recovery window on my computer says, "Do Not disconnect your device from the PC" but the loading bar never goes past 0%, then after a while it'll give me another fail message...
Click to expand...
Click to collapse
itmaster85 said:
Try this
http://forum.xda-developers.com/showthread.php?t=2559715
Click to expand...
Click to collapse
Problem solved!!!
Thank you so much

Firmware Upgrade fail Try using recovery mode i897! HELP!!!

Hello Guys!
I got Samsung Galaxy S Captivate and I've been using my phone since 2 years perfectly no problem but last week my phone suddenly stop working I was using HELLYBEAN on my captivate and it was working fine but then my phone stopped working and after that whenever I tried to install different Rom it was saying "Installation Aborted" after getting same errors with different roms, I decided to go back to Stock and everything went successful but after I tired to power on my phone it kept going to recovery mode and it was saying "E:failed to mount /sdcard" but after few time restarting my phone, I made it to the AT&T logo but unfortunately my phone kept on restarting after AT&T logo, so to get rid of that I tired to follow this steps from this website and actually lost my phone completely NOW!
http://blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
I tried to install .Tar with Odin but failed and After that I lost my phone completely and my phone started saying "Firmware Upgrade fail Try using recovery mode" Can someone help me with this please and I'm not able to get into download mode NOW! whenever I try to get into download mode and plug USB cable with holding the Volume + and - my phone shows the same error and can't get into download or recovery mode can someone PLEASE Help me! Please! I really want my phone back! :crying:
Here is the Error which I'm getting whenever I try to get into Download mode or plug USB cable *Attachment*
Thank You
Looking forward to kind replies!
ShahX said:
Hello Guys!
I got Samsung Galaxy S Captivate and I've been using my phone since 2 years perfectly no problem but last week my phone suddenly stop working I was using HELLYBEAN on my captivate and it was working fine but then my phone stopped working and after that whenever I tried to install different Rom it was saying "Installation Aborted" after getting same errors with different roms, I decided to go back to Stock and everything went successful but after I tired to power on my phone it kept going to recovery mode and it was saying "E:failed to mount /sdcard" but after few time restarting my phone, I made it to the AT&T logo but unfortunately my phone kept on restarting after AT&T logo, so to get rid of that I tired to follow this steps from this website and actually lost my phone completely NOW!
http://blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
I tried to install .Tar with Odin but failed and After that I lost my phone completely and my phone started saying "Firmware Upgrade fail Try using recovery mode" Can someone help me with this please and I'm not able to get into download mode NOW! whenever I try to get into download mode and plug USB cable with holding the Volume + and - my phone shows the same error and can't get into download or recovery mode can someone PLEASE Help me! Please! I really want my phone back! :crying:
Here is the Error which I'm getting whenever I try to get into Download mode or plug USB cable *Attachment*
Thank You
Looking forward to kind replies!
Click to expand...
Click to collapse
The imaged you linked is considered a download mode, you should be able to flash from it.
That being said, the error you got often means your internal memory is dead. Which also means that you can't get what was on it (Think of it as a hard drive that just died). Your best bet after trying to flash stock would be to partition an SD card and run from it (there's a guide on how to do it on here).
BWolf56 said:
The imaged you linked is considered a download mode, you should be able to flash from it.
That being said, the error you got often means your internal memory is dead. Which also means that you can't get what was on it (Think of it as a hard drive that just died). Your best bet after trying to flash stock would be to partition an SD card and run from it (there's a guide on how to do it on here).
Click to expand...
Click to collapse
Thanks for your reply bro, but the thing is My Computer don't detect my phone neither my phone appears on my computer! Not even with Odin I tried but Failed Anyway to Flash back to any other ROM just to get my phone working! Please?
Thank You.
ShahX said:
Thanks for your reply bro, but the thing is My Computer don't detect my phone neither my phone appears on my computer! Not even with Odin I tried but Failed Anyway to Flash back to any other ROM just to get my phone working! Please?
Thank You.
Click to expand...
Click to collapse
Try reinstalling your drivers to get your phone connected.
But I'm pretty sure you'll have to partition an SD card. Your internal memory sounds dead.
Amazing Reply! but Still need help
BWolf56 said:
Try reinstalling your drivers to get your phone connected.
But I'm pretty sure you'll have to partition an SD card. Your internal memory sounds dead.
Click to expand...
Click to collapse
thankyou bro for an amazing reply! I actually worked it out my computer detected my phone even Odin did, but can you please tell me what to do next? like How do I flash my phone back to stock rom or get into the CWM boot loader cuz whenever I try to get into recovery or press any key or connect my cable my phone automatically gets into that same screen the one I showed you above! Please bro help, it's been ages since I haven't used my phone..
Thank You!
ShahX said:
thankyou bro for an amazing reply! I actually worked it out my computer detected my phone even Odin did, but can you please tell me what to do next? like How do I flash my phone back to stock rom or get into the CWM boot loader cuz whenever I try to get into recovery or press any key or connect my cable my phone automatically gets into that same screen the one I showed you above! Please bro help, it's been ages since I haven't used my phone..
Thank You!
Click to expand...
Click to collapse
You gotta do some basic research. Here's the stock ROM (without bootloaders): http://www.mediafire.com/download/w..., NO Bootloaders, Re-partition, Full Wipe.zip
Just loat it up on Odin and flash away. You can't get in recovery cause your phone can't load anything atm, it needs a clean flash. Just make sure nothing interrupts Odin while it's flashing.
Almost Done
BWolf56 said:
You gotta do some basic research. Here's the stock ROM (without bootloaders): http://www.mediafire.com/download/w..., NO Bootloaders, Re-partition, Full Wipe.zip
Just loat it up on Odin and flash away. You can't get in recovery cause your phone can't load anything atm, it needs a clean flash. Just make sure nothing interrupts Odin while it's flashing.
Click to expand...
Click to collapse
Thanks for your kind reply again bro, I did everything as you said but unfortunately my Odin got stuck on zImage but the phone was showing blue line under written "loading" basically it was stuck at one point and wasn't moving forward so I disconnected my phone and tried to connect again but nothing showed up so I tired to get into download mode and fortunately I GOT into the download mode the one I used to get when my phone was working "Yellow with Andriod Logo" so after getting into download mode I tired to flash the stock Rom the one you gave me but got can't get through it got stuck on factoryfs.rfs? or should I give it more time, it's been 10 mins already...Any Help?
thankyou sooo much for your help
ShahX said:
Thanks for your kind reply again bro, I did everything as you said but unfortunately my Odin got stuck on zImage but the phone was showing blue line under written "loading" basically it was stuck at one point and wasn't moving forward so I disconnected my phone and tried to connect again but nothing showed up so I tired to get into download mode and fortunately I GOT into the download mode the one I used to get when my phone was working "Yellow with Andriod Logo" so after getting into download mode I tired to flash the stock Rom the one you gave me but got can't get through it got stuck on factoryfs.rfs? or should I give it more time, it's been 10 mins already...Any Help?
thankyou sooo much for your help
Click to expand...
Click to collapse
You can give Heimdall a shot (note that it will install its own drivers on the usb port you'll use it on so Odin won't work on it): http://www.mediafire.com/download/5..., NO Bootloaders, Wipe-Heimdall One-Click.zip
If that doesn't work, I can say at like 95% that your internal memory is dead and you'll have to partition an SD card if you wanna get it running. There are guides on how to do it on here.
I've seen that image often. Uninstalling then re-installing the usb drivers for Samsung helped me. Flashing a captivate can be a little convoluted granted all the different methods of acquiring root and flashing a rom that's been used through the years ... and subsequently posted somewhere on the internet. I'd suggest the following .... once your device is recognized in Odin.
1. Flash I897UCKK4 with Odin (no root) for gingerbread stock rom
2. Download and install KK4root. Run Kk4 root "run" exe in the kk4_root folder. Corn kernel is installed with modded recovery system
3. From Corn kernel recovery click "root extras" to get su and busy box installed

Please HELP Note 9 Bricked "could not do normal boot. Invalid Kernel Length!"

Please HELP Note 9 Bricked "could not do normal boot. Invalid Kernel Length!"
Hi Everyone,
So it seems like I might have flashed a wrong device twrp in AP tab in odin to my N960f/ds. Now I can not boot device, twrp(recovery) or even download mode :'( . my phone only shows a red error message saying "Could Not Do Normal Boot, Invalid KERNEL LENGTH!" . phone is not read on pc for odin adb or smart switch . I was reading something about using an sd card with preloaded firmware if anyone knows anything about that?? not sure what to do please help !! Thanks in advance
Similar issue after being repeatedly told I need to flash TWRP 3.3.1. I've had no problems with OrangeFox or TWRP 3.4 but when I flashed TWRP 3.3.1 I've ended up with the red message "Could not do normal boot. Invalid KERNEL LENGTH" on startup for around 2 seconds then it powers off. Booting into recovery obviously doesn't work, download mode doesn't work either, all I get is the red message. I thought I was as good as bricked.
It turns out when you run Odin on a PC connected via USB cable it still manages to go into download mode when you hold Vol Down + Bixby. From there you can flash a new recovery using Odin. For Note 9 look here: https://twrp.me/samsung/samsunggalaxynote9.html
You want the download as an .img.tar - see here https://eu.dl.twrp.me/crownlte/
Open Odin (run as Administrator), pick the twrp-{version}-crownlte..img.tar file in the AP slot and click Start. From there I was able to get up and running again, hopefully it works for you too.
FerretallicA said:
Similar issue after being repeatedly told I need to flash TWRP 3.3.1. I've had no problems with OrangeFox or TWRP 3.4 but when I flashed TWRP 3.3.1 I've ended up with the red message "Could not do normal boot. Invalid KERNEL LENGTH" on startup for around 2 seconds then it powers off. Booting into recovery obviously doesn't work, download mode doesn't work either, all I get is the red message. I thought I was as good as bricked.
It turns out when you run Odin on a PC connected via USB cable it still manages to go into download mode when you hold Vol Down + Bixby. From there you can flash a new recovery using Odin. For Note 9 look here: https://twrp.me/samsung/samsunggalaxynote9.html
You want the download as an .img.tar - see here https://eu.dl.twrp.me/crownlte/
Open Odin (run as Administrator), pick the twrp-{version}-crownlte..img.tar file in the AP slot and click Start. From there I was able to get up and running again, hopefully it works for you too.
Click to expand...
Click to collapse
Thank you very much. You just saved my phone. I had the same issue and thought i just hardbricked it

[Q/A] phone soft bricked / can't flash with odin either

Hi everyone, I was using this forum for a long time but this is the first post I've ever written.
Let me explain my problem:
I was rooting my SM-M215F/DSN and Odin gone mad for some reason and bricked the phone. Now phone is on a loop with screen sayin "An error has occurred while updating the device software. Use the emergency recovery function." Usually I can fix this kind of situations but this time I cannot fix this and hope someone can help me with it. This was not my first ROOT but for this phone it was.
These are the things I've already tried:
1) Tried to reboot phone to download mode. After pressing Volume (-) & Power it don't let me do anything and goes back to that warning screen directly.
2) Drained all battery power to kill phone, but when I connect it to grid it goes back to that screen again.
3) Used emergency recovery with Smart Switch but get an error "SM-M215F does not support initializing"
4) Odin cannot connect to phone in this mode so it cannot turn back to stock firmware
5) Someone has told in this forum that it's another kind of download mode and use Heimdall. I've tried it and it detects the device but while downloading .pit file it gives "ERROR: Failed to access device. libusb error: -12". I am a little bit n00b on Heimdall so I gave up.
So if anyone can help I will be really appreciated. Thanks in advance.
After a real struggle I've found my own solution so need to share with community.
Tenoshare ReiBoot for Android free version let me exit from download mode.
Hope this helps.

Categories

Resources