Related
I'm ZR user, not DEV
If you are ZR user and use my port rom, please post any question in ZR topic, don't post in Z topic
Validus rom :
New: Validus_5.1.1_V8_20150607 port
http://forum.xda-developers.com/showpost.php?p=61353871&postcount=149
Old:
Validus_8.0_2015.05.07 port from @Alx31TLse ;
http://forum.xda-developers.com/showpost.php?p=60685073&postcount=120
Validus Rom v8.0-2015-04-22 port from @Alx31TLse :
http://forum.xda-developers.com/showpost.php?p=60317689&postcount=105
Resurrection Remix Rom:
New:
RR_Remix_5.4.4_2015.05.11_EvoMix-KMA port from @airlessproject
link: http://forum.xda-developers.com/showpost.php?p=60686891&postcount=121
OLD:
RR_v5.4.2_20150424 port from @airlessproject
Link: https://drive.google.com/file/d/0B-hTXkqVcs2Wb1NzNWVac3ktQ2c/view?usp=sharing
v5.4.1_20150411: http://forum.xda-developers.com/showpost.php?p=60075712&postcount=89
- Wipe all (dirty flash from 5.4.0 need test)
- Flash rom, gapps 5.1 and superSU
Old:
Resurrection Remix 5.4.0 (Lollipop 5.1) with EVOMIX kernel port from Yuga:
1. Link:
- TWRP 2.8.6.0: https://drive.google.com/file/d/0B-hTXkqVcs2WanFLT0ZqN1pjTU0/view?usp=sharing
- Rom RR_5.4.0: https://drive.google.com/file/d/0B-hTXkqVcs2WME5OaERoeTRENjg/view?usp=sharing
- Gapps 5.1: https://drive.google.com/file/d/0B-hTXkqVcs2WWU5ESzJYNm53YTA/view?usp=sharing
- SuperSU v2.4.6: https://drive.google.com/file/d/0B-hTXkqVcs2WWnI1MUVxVHhRV1U/view?usp=sharing
2. How to flash:
- Reboot to recovery and flash TWRP 2.8.6.0
- Press reboot recovery again: to enter new recovery TWRP 2.8.6.0
- Flash Rom RR_5.4.0 ; Gapps 5.1; superSU v2.4.6
- Reboot phone ...
- Wait for long time ..... (coffee or tea ...)
- Done
3. Known bug:
- Enter recovery by press volume key not working.
Fixed: http://forum.xda-developers.com/showpost.php?p=59923951&postcount=72
- Vibrator intensity not working
- Auto rotate when in landscape bug:
Fixed: Use root explorer and editor some number in system/etc/sensors.conf like below:
# Setup accelerometer axis
bma250input_axis_x = 0
bma250input_axis_y = 1
bma250input_axis_z = 2
bma250input_neg_x = 1
bma250input_neg_y = 0
bma250input_neg_z = 1
# Setup AKM8963 axis
ak896xmagnetic_layout = 0,0,1,0,1,0,-1,0,0
# Setup accelerometer calibration threshold and axis
accel_threshold_first = 250
accel_threshold_second = 50
accel_axis_x = 0
accel_axis_y = 0
accel_axis_z = -1
Save it and reboot. Done.
- Another bugs: You tell me ...
OLD:
Resurrection Remix LP v5.3.7 UNOFFICIAL from Z rom (2015.03.01)
V2: Resurrection remix 5.3.9_20150320
1. Advise: Full wipe before flash rom, gapps, superSUv2.46 (dirty flash will get some apps fc)
link fixed:
https://docs.google.com/file/d/0B-hTXkqVcs2WNkVDOVcyQ0xRZVk/edit?usp=docslist_api
2. Changlog from V5.3.7 to V5.3.9
https://gist.github.com/westcripp/8874051#file-resurrection-remix-changelog
OLD
V1_Resurrection_Remix_LP_v5.3.7_20150301_dogo
1. V1 Changlog:
- Fixed recovery: Rom included TWRP 2.8.5.0 (no more need flash recovery ....)
- Fixed bootanimation of rom fit to our ZR
2. How to flash V1:
- Download rom: V1_Resurrection_Remix_LP_v5.3.7_20150301_dogo zip
link: https://drive.google.com/file/d/0B-hTXkqVcs2WanlUVkNXNWg1Szg/view?usp=sharing
- Download gapps for lollipop zip (google search ..)
- Download superSUv2.46 zip (google search ..)
- Put 3 files to sdcard of ZR
- Flash Rom, flash gapps and flash superSUv2.46
- Reboot. DONE.
Tested
For older rom:
How to flash:
1. Download Resurrection_Remix v5.3.7 rom from link below
https://drive.google.com/file/d/0B-hTXkqVcs2WakprMFRKRzB0cFU/view?usp=sharing
- Download gapps lollipop zip and superSU 2.46 zip and put them into sdcard (use google search ... )
2. Download Philz_touch_recovery.zip (for easy to use and option) and put it to sdcard:
Link: https://drive.google.com/file/d/0B-hTXkqVcs2WYnhQc3pYeU85QlE/view?usp=sharing
3. Flash new rom:
- Reboot to recovery
- Goto : Wipe and format Otions
- Press: Clean to Install a New Rom.
- Flash new rom, gapps, SuperSU 2.46
4. Flash Philz touch recovery
- Install Philz_touch_recovery.zip
5. Reboot phone.
- Done.
6. Bug:
You tell me ...
7. Bootanimation resize fit to ZR
http://forum.xda-developers.com/showpost.php?p=59187027&postcount=7
Special Thanks: @Alx31TLse , @infected_ , @xenius9 , @Noel Macwan , @airlessproject for dev :highfive:
Welcome
nice post. but can you tell me this build is Resurrection_Remix_LP_v5.3.7-20150302 and i see original thread no any build ni Resurrection_Remix_LP_v5.3.7_20150301 so please this is build with new EvoMix custom kernel ????
Just installed. So far is amazing. Everything working. Will report any bugs. Very polished and many options compared to our other LP roms (except boot animation wrong size). I was on CM12 and wiped everything then installed as instructed (but without reinstalling recovery). Bundled recovery is the basic Mokee looking one. Wil try reflash TWRP.
Thank you very much.
EDIT: It reflashes recovery with rom so I reinstalled Philz via terminal app (as per method 1 instructions) after ROM install.
---------- Post added at 11:59 AM ---------- Previous post was at 11:16 AM ----------
vaja_dinesh2006 said:
nice post. but can you tell me this build is Resurrection_Remix_LP_v5.3.7-20150302 and i see original thread no any build ni Resurrection_Remix_LP_v5.3.7_20150301 so please this is build with new EvoMix custom kernel ????
Click to expand...
Click to collapse
Kernel is listed as 3.4.0-cm-gb3d8369 [email protected] #1 Feb 21 11:56:47 EST 2015
dannyglover said:
Just installed. So far is amazing. Everything working. Will report any bugs. Very polished and many options compared to our other LP roms (except boot animation wrong size). I was on CM12 and wiped everything then installed as instructed (but without reinstalling recovery). Bundled recovery is the basic Mokee looking one. Wil try reflash TWRP.
Thank you very much.
EDIT: It reflashes recovery with rom so I reinstalled Philz via terminal app (as per method 1 instructions) after ROM install.
---------- Post added at 11:59 AM ---------- Previous post was at 11:16 AM ----------
Kernel is listed as 3.4.0-cm-gb3d8369 [email protected] #1 Feb 21 11:56:47 EST 2015
Click to expand...
Click to collapse
Yes! Flash recovery via FOTA before or after flash rom is ok, but this menthod only guided to some one with no experience
I think philz touch is easy and more options to use
Thanks!
vaja_dinesh2006 said:
nice post. but can you tell me this build is Resurrection_Remix_LP_v5.3.7-20150302 and i see original thread no any build ni Resurrection_Remix_LP_v5.3.7_20150301 so please this is build with new EvoMix custom kernel ????
Click to expand...
Click to collapse
No new EvoMix custom kernel. Would you port or build kernel to our ZR? I try to port kernel but unsuccessful
New resize boot animation
- copy this file to /system/media overwrite old file
- set permissions: rw-r--r--
- reboot
@uncomment, this rom is not prerooted??
kash296 said:
@uncomment, this rom is not prerooted??
Click to expand...
Click to collapse
Half root
Sent from my Xperia ZR using XDA Free mobile app
Add updater script push twrp recovery img so does not require flashing recovery each time
Thank you for the ROM I will check it out!
Sent from my Xperia ZR using XDA Free mobile app
How do you do it?
I flashed recovery via FOTA once and now not need flash it again
Sent from my Xperia ZR using XDA Free mobile app
uncomment said:
How do you do it?
I flashed recovery via FOTA once and now not need flash it again
Sent from my Xperia ZR using XDA Free mobile app
Click to expand...
Click to collapse
Downloading :thumbup:
Sorry for quoting.Didn't mean it :screwy:
Tapped from my furious ZR
@uncomment perfect port bro. Cheers
Tks for your port @uncomment !
I had a problem with FOTA Kernel but what happen if I use TWRP ?
tonytee said:
Tks for your port @uncomment !
I had a problem with FOTA Kernel but what happen if I use TWRP ?
Click to expand...
Click to collapse
No problem, you can use TWRP or CMW cause recovery inside boot.img not good
Sent from my Xperia ZR using XDA Free mobile app
After flashed it,now I cant use recovery (CWM & TWRP)
I tried menthod 2 but it failed.
Sry my bad english!
tonytee said:
After flashed it,now I cant use recovery (CWM & TWRP)
I tried menthod 2 but it failed.
Sry my bad english!
Click to expand...
Click to collapse
Use Xperia Recovery Manager to push the recovery in FotaKernel partition :fingers-crossed:
V1 Resurrection_Remix_LP_v5.3.7_20150301 uploading .....
uncomment said:
V1 Resurrection_Remix_LP_v5.3.7_20150301 uploading .....
Click to expand...
Click to collapse
Changelog??
Tapped from my furious ZR
V1_Resurrection_Remix_LP_v5.3.7_20150301_dogo
1. Changlog:
- Fixed recovery: Rom included TWRP 2.8.5.0 (no more need flash recovery ....)
- Fixed bootanimation of rom fit to our ZR
2. How to flash:
- Download rom: V1_Resurrection_Remix_LP_v5.3.7_20150301_dogo zip
link: https://drive.google.com/file/d/0B-hTXkqVcs2WanlUVkNXNWg1Szg/view?usp=sharing
- Download gapps for lollipop zip (google search ..)
- Download superSUv2.46 zip (google search ..)
- Put 3 files to sdcard of ZR
- Flash Rom, flash gapps and flash superSUv2.46
- Reboot. DONE.
Tested
MIUI V6 Stock ROM based (.292 build)
This rom - port from xperia Z ROM by lpws521
Link: https://yadi.sk/d/c0IPkkwfgSBnp
For locked and unlocked bootloader. Multilang.
Installation:
1. Download rom and push it to sdcard
2. Reboot to recovery, wipe and install ROM(select your model and BL from aroma installer)
awesome tq xenius9
xenius9 said:
MIUI V6 Stock ROM based (.292 build)
This rom - port from xperia Z ROM by lpws521
Link: https://yadi.sk/d/c0IPkkwfgSBnp
For locked and unlocked bootloader. Multilang.
Installation:
1. Download rom and push it to sdcard
2. Reboot to recovery, wipe and install ROM(select your model and BL from aroma installer)
Click to expand...
Click to collapse
Thanks, wud try that.
Is it Kit-Kat based?
saggiboy231 said:
Thanks, wud try that.
Is it Kit-Kat based?
Click to expand...
Click to collapse
yes it is. shown in the screenshots provided by the dev
xenius9 said:
MIUI V6 Stock ROM based (.292 build)
This rom - port from xperia Z ROM by lpws521
Link: https://yadi.sk/d/c0IPkkwfgSBnp
For locked and unlocked bootloader. Multilang.
Installation:
1. Download rom and push it to sdcard
2. Reboot to recovery, wipe and install ROM(select your model and BL from aroma installer)
Click to expand...
Click to collapse
Look nice,,thanks @Xenius,,,,how about bluethot and wifi sir??
Sent from my C5503
xenius9 said:
MIUI V6 Stock ROM based (.292 build)
This rom - port from xperia Z ROM by lpws521
Link: https://yadi.sk/d/c0IPkkwfgSBnp
For locked and unlocked bootloader. Multilang.
Installation:
1. Download rom and push it to sdcard
2. Reboot to recovery, wipe and install ROM(select your model and BL from aroma installer)
Click to expand...
Click to collapse
Hi xenius9 , whether this room will get update OTA ??
Tnx its so smooth and stable but no lollipop version?!it would be great
Very stable.
Crashes whenever I try to get root access after installing SuperSU, though.
(MIUI's root access thing is very inconvenient)
Sent from my C5503 using XDA Free mobile app
is it possible to use lightning kernels?!
Can apps be moved to SD card?
Sent from my Xperia ZR
xenius9 said:
MIUI V6 Stock ROM based (.292 build)
This rom - port from xperia Z ROM by lpws521
Link: https://yadi.sk/d/c0IPkkwfgSBnp
For locked and unlocked bootloader. Multilang.
Installation:
1. Download rom and push it to sdcard
2. Reboot to recovery, wipe and install ROM(select your model and BL from aroma installer)
Click to expand...
Click to collapse
found bug:
Portable Hot spot wont work
NFC is not reachable
SuperSU conflicts causes titanium backup crash at start
@xenius9 please give ota update for this room
Will try it tonight....thanks, great ROM!!!
where i can download GAPPS for this rom??
Sent from my C5503
I downloaded Play Store App from MIUI store (don't understand Chinese but with a bit of patience it's not that difficult....). ROM is working great, I have only a slight problem that sometimes it freezes and powers off, while showing a spinning circle mid screen. It's not that frequent, though, so I could live with that ATM.....
V3 testing: http://forum.xda-developers.com/showpost.php?p=61552098&postcount=18
OLD:
FEATURES ( AROMA ) VERSION 1 (ONLY FOR UNLOCKED BOOTLOADER WITH RECOVERY)
Based On 10.6.A.0.454 LP FW
Aroma Installer
Fully Deodexed, Superuser Mod Included
Zip Aligned
Fully Rooted With Latest SuperSU
.454 Stock Kernel Included
Z2 Lolipop X-Reality and Supervivid Mod
Z4 Themes
Z4 Boot Animation
Z4 Latest Home With Small Icon Choose Option
Z2 Styled New Close All Button
Fully Working Xposed Framework In Aroma
Kitkat Styled Advanced Power Menu
Added Some System Tweaks
Option To Choose / Remove Sony Camera Add Ons
Option To Choose / Remove Sony Apps
Various Navigation Bar DPI Mods
Various SystemUI Mods
Call Recording
Disabled Annoying Data Notification
Enabled 2G/3G Only Mod
Viper4Android Add On From Aroma
And Many More...
LINK: https://drive.google.com/file/d/0B-hTXkqVcs2WeXVNTThwZE9wakU/view?usp=sharing
INSTRUCTIONS
Please read it carefully
Download The ROM Zip and Fix_DPI for ZR.zip (link attacted below) And Move To Phone
Enter Recovery
Flash ROM Zip
Carefully Follow Aroma Installation
Do Not Select Dolby Digital Mod ( Bootloop )
After Complete, reboot phone into rom (please wait for 15 minutes) Done!
Reboot to recovery and flash Fix_DPI for ZR zip to fix DPI and correct phone info
Reboot and done!
SOURCE:
Rom: http://forum.xda-developers.com/xperia-z/development/rom-purex-l-v1-t3125165
Kernel: http://forum.xda-developers.com/showthread.php?t=2642847
CREDITS
@Rajeev ; @xenius9
TESTED BY: @hagar006
Having tested this ROM i must say it's pretty impressive... I'm not a fan of anything stock but this is a fantastic build/port.. Massive thanks and an awesome port yet again..
after flash, I have wrong DPI, what to do?
cipetonk said:
after flash, I have wrong DPI, what to do?
Click to expand...
Click to collapse
Download root browser app
Editor system/build.prop and edit line
ro.sf.lcd_density=480
To
ro.sf.lcd_density=320
Save and reboot
Sent from my C6603 using XDA Free mobile app
Fix DPI in OP
cipetonk said:
after flash, I have wrong DPI, what to do?
Click to expand...
Click to collapse
or simply download attacted file zip at OP move to phone
reboot to recovery and flash zip
reboot phone
done
"ro.drm.active.num=5
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
ro.drm.active.4=ckb,1"
Would these activate DRM functions without deleting CredentialM/arm ? @uncomment
Daedroza said:
"ro.drm.active.num=5
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
ro.drm.active.4=ckb,1"
Would these activate DRM functions without deleting CredentialM/arm ? @uncomment
Click to expand...
Click to collapse
Let me see later Daedroza, because I port it for myself to use, evry working fine for me except sony video app not working when set selinux to permisssion
Thanks!
Sent from my C5503 using XDA Free mobile app
How to upgrade version to 2.2??? Just flash or wait for your port room again??? Thanks
Sorry for my bad English
thx
Bootloop
I didn't come across Dolby Digital Mod but my phone went into bootloop.I am forced to install stock.Please guide me accordingly.
RajeshBasha said:
I didn't come across Dolby Digital Mod but my phone went into bootloop.I am forced to install stock.Please guide me accordingly.
Click to expand...
Click to collapse
I'm not sure what you experienced but this ROM takes a long time to boot from flash.. Up to 10 mins so patience and a cup of coffee is needed
Sent from my Xperia Z using XDA Forums Pro
RajeshBasha said:
I didn't come across Dolby Digital Mod but my phone went into bootloop.I am forced to install stock.Please guide me accordingly.
Click to expand...
Click to collapse
goto recovery and wipe system and data, cache and dalvik cache before flash rom
in aroma installer rom select C6603 device
uncomment said:
goto recovery and wipe system and data, cache and dalvik cache before flash rom
in aroma installer rom select C6603 device
Click to expand...
Click to collapse
hey i did the same ..first i wiped system and data , cache , dalvik cache ........and then flashed the rom (i selected c6603 device in aroma installer) followed by fix dpi .zip ...then i rebooted my phone but its stuck on boot animation . i waited for approx 30 mins( obvious, more then it, i think) but the phone not booted fully. after that removed battery and tried 3 times the results are same .....
what i am doing wrong in installing the .zip??
niraj5.chaudhari said:
hey i did the same ..first i wiped system and data , cache , dalvik cache ........and then flashed the rom (i selected c6603 device in aroma installer) followed by fix dpi .zip ...then i rebooted my phone but its stuck on boot animation . i waited for approx 30 mins( obvious, more then it, i think) but the phone not booted fully. after that removed battery and tried 3 times the results are same .....
what i am doing wrong in installing the .zip??
Click to expand...
Click to collapse
Try flash rom and dont select install sound mode, xposed.
After flash rom done, reboot into rom.
After that goto recovery and flash fix dpi zip
Sent from my C5503 using XDA Free mobile app
niraj5.chaudhari said:
hey i did the same ..first i wiped system and data , cache , dalvik cache ........and then flashed the rom (i selected c6603 device in aroma installer) followed by fix dpi .zip ...then i rebooted my phone but its stuck on boot animation . i waited for approx 30 mins( obvious, more then it, i think) but the phone not booted fully. after that removed battery and tried 3 times the results are same .....
what i am doing wrong in installing the .zip??
Click to expand...
Click to collapse
its same with me.. i wait for 1 hour haha. its cnt run ahead ..stuk at balck screen
uncomment said:
Try flash rom and dont select install sound mode, xposed.
After flash rom done, reboot into rom.
After that goto recovery and flash fix dpi zip
Sent from my C5503 using XDA Free mobile app
Click to expand...
Click to collapse
thankx man done with it...now rom is running smooth....thanks for u...:good::good:
Puneetsaini said:
its same with me.. i wait for 1 hour haha. its cnt run ahead ..stuk at balck screen
Click to expand...
Click to collapse
follow the steps of uncomment it worked for me....
niraj5.chaudhari said:
thankx man done with it...now rom is running smooth....thanks for u...:good::good:
follow the steps of uncomment it worked for me....
Click to expand...
Click to collapse
Will edit how to flash at OP
Sent from my C5503 using XDA Free mobile app
PureXL_V3 port from Rajeev testing for UB
V3 testing
link: https://drive.google.com/file/d/0B-hTXkqVcs2WU2RpWHJlNEdDaE0/view?usp=sharing
kernel built from @Tommy-Geenexus (Zombie kernel)
(notice: dont flash Fix_dpi zip)
Rom Source: http://forum.xda-developers.com/xperia-z/development/rom-purex-l-v1-t3125165
Kernel source: http://forum.xda-developers.com/xperia-z/orig-development/kernel-zombie-t3126417
uncomment said:
V3 testing
link: https://drive.google.com/file/d/0B-hTXkqVcs2WU2RpWHJlNEdDaE0/view?usp=sharing
kernel built from @Tommy-Geenexus (Zombie kernel)
(notice: dont flash Fix_dpi zip)
Rom Source: http://forum.xda-developers.com/xperia-z/development/rom-purex-l-v1-t3125165
Kernel source: http://forum.xda-developers.com/xperia-z/orig-development/kernel-zombie-t3126417
Click to expand...
Click to collapse
tq @uncomment i will try it
Mod volume boost here
http://forum.xda-developers.com/showthread.php?t=3116043
Sent from my C6603 using XDA Free mobile app
[what]
single modified kernel with integrated twrp recovery & injected drm daemon. all security blocks disabled.
STRICTLY FOR Z5 DUAL ON MARSHMALLOW ONLY
kernel base ---- : E6683_32.1.A.1.185_RC5_MY
recovery trigger : yellow LED > standby for key input, amber LED > entering recovery mode
trigger key ---- : vol up (twrp) or vol down (stock recovery/fotakernel)
[why]
if u dont know why, pls dont proceed.
[how]
1 - unlock bootloader
2 - download this kernel package
3 - extract boot.img & flash thru fastboot or flash zip package directly on existing
recovery, if any.
[credits]
#tobias.waldvogel --- everything
#Chainfire ---------- SuperSU
#xiaolu ------------- mkbootimg
#nilezon/jackfagner - twrp-sony-recovery-boot-script
#[NUT] -------------- some xzdr script
#AndroPlus ---------- Kernel & TWRP 3.0 for Xperia Z5
[faq]
q : does it works with my device xxxx?
a : idk. if ur device differ than aforesaid, pls try & share ur result here.
[addon features]
+: autoroot
+: auto drm restore
+: auto busybox installer
+: init.d support
+: twrp recovery (vol up)
+: fotakernel recovery (vol down)
+: auto screen mirroring fix (experimental)
[download]
(2016/04/10)(v4a) DUAL (E6683/E6633) | DOWNLOAD
+: updated kernel base E6683_32.1.A.1.185_RC5_MY
+: latest tobias's tools & twrp 3.0.1-0
[deprecated]
(2016/03/21)(v3a) DUAL (E6683/E6633) | DOWNLOAD
+: kernel is now original stock for stability (no longer AndroPlus custom build)
+: twrp fixed
(2016/03/13)(v2a) DUAL (E6683/E6633) | DOWNLOAD
+: updated to AndroPlus Kernel v20
+: now fully AUTO-ROOT
-> no need to (re)flash supersu. if root missing, simply reboot. (SuperSU v2.65)
i: Kernel & TWRP still in testing stage.
i: currently i know what works & what broken in recovery. dont panic.
(2016/03/11)(v1a) DUAL (E6683/E6633) | DOWNLOAD
+: AndroPlus test 02 kernel
+: slipstreamed drm daemon (drm restore)
-: Kernel & TWRP still in testing stage.
i: currently i know what works & what broken in recovery. dont panic.
Great, nice to have more options
monx®,
Great job!
Thanks for giving E6683 owners a chance to test the MM rom.
t's a great job!
Can you do the same work for Z5 E6653 please?
sparmand said:
t's a great job!
Can you do the same work for Z5 E6653 please?
Click to expand...
Click to collapse
same here how about E6653
sparmand said:
t's a great job!
Can you do the same work for Z5 E6653 please?
Click to expand...
Click to collapse
hadec said:
same here how about E6653
Click to expand...
Click to collapse
Guys, this is basically AndroPlus kernel. For single sim device, kindly proceed here.
Jozinek said:
Understand, but i see that AndroPlus is only for 5.1.1, but we need it for Marshmallow... So if you are able to make it for E6653, it will be perfect
Click to expand...
Click to collapse
Not correct, the mm version is within the thread
Could be awesome for us Z5C users as well, hehe..
For z5c it would be great.
maybe I'm blind, but where is the github/source link? or do you use the exact sources from AndroPlus? Still, there probably should be a source link for the buildscript
shafiq01 said:
Could be awesome for us Z5C users as well, hehe..
Click to expand...
Click to collapse
stiffmeister75 said:
For z5c it would be great.
Click to expand...
Click to collapse
i only hv E6683. u guys can keep eyes @ Z5 Compact thread.
monx® said:
i: currently i know what works & what broken in recovery. dont panic.
Click to expand...
Click to collapse
monx®,
Just to make sure that you are aware of this: When in twrp there is no adb connection with bb.
Thank you for the great job, Just wondering are the DRM & root integrated in the .zip file?
I just flash the boot.img in the .zip and what should I do next to have DRM patch and root? flash the .zip by TWRP or I have to download DRM and supersu separately and flash them?
Thank you!
Anatoxy said:
monx®,
Just to make sure that you are aware of this: When in twrp there is no adb connection with bb.
Click to expand...
Click to collapse
yes. waiting for new binary.
Fleet.tw said:
Thank you for the great job, Just wondering are the DRM & root integrated in the .zip file?
I just flash the boot.img in the .zip and what should I do next to have DRM patch and root? flash the .zip by TWRP or I have to download DRM and supersu separately and flash them?
Thank you!
Click to expand...
Click to collapse
supersu only. drm daemon oredi in the kernel.
monx® said:
Guys, this is basically AndroPlus kernel. For single sim device, kindly proceed here.
Click to expand...
Click to collapse
alright i flashed twrp but i gof this problem on internall storage...anyone can help me pass this error?i cant dk anything not wipe data
hadec said:
alright i flashed twrp but i gof this problem on internall storage...anyone can help me pass this error?i cant dk anything not wipe data
Click to expand...
Click to collapse
what is ur exact z5 model? send me the stock kernel.sin & the kernel u flashed. let me try see whats wrong.
monx® said:
yes. waiting for new binary.
supersu only. drm daemon oredi in the kernel.
Click to expand...
Click to collapse
Super, just downloaded the supersu beta and flashed. now everything works great.
thank you, you guys are lifesavers.
monx® said:
yes. waiting for new binary.
Click to expand...
Click to collapse
Thanks. Hope will come soon.
I have another issue related to the external SD card: the TitaniumBackup says that its not writable. Do you have same issue? Can I solve it some how?
Anatoxy said:
Thanks. Hope will come soon.
I have another issue related to the external SD card: the TitaniumBackup says that its not writable. Do you have same issue? Can I solve it some how?
Click to expand...
Click to collapse
In Backup folder location, above DETECT! button, change the Storage provider. Its TB & Marshamallow stuff, not related with kernel, etc.
[GS]Mod v1 for A300FU only
Based on A300FUXXU1CPH3
I created this rom for my personal use and i want to share with other.
DISCLAIMER:
Code:
*I'M NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE*
*DO AT YOUR OWN RISK*
*Your Warranty Will VOID If you Flash TWRP Recovery and ROM*
Download and Changelog at #2 Post
ROM INFORMATION
-Stock ROM
-DeOdexed
-DeKnoxed
-Zipaligned
-PreRooted
-BusyBox Installed
-init.d Support
S7 or Note7 Apps
S7 Wallpaper
S7 Launcher + Theme
S7 Easy Launcher -
N7 Internet
S7 Keyboard
N7 My Files
N7 Video
N7 Music
N7 Voice Recorder
N7 E-Mail
N7 Memo
N7 Calculator
S7 S Planner
S7Ringtones
Installations
Download the Rom zip and copy it to your SD Card
Now enter TWRP recovery
*Factory reset
then
*Flash the Rom zip From SD Card
*Reboot Device.
Be patient!! Boot time is around 15 min, but could take up to 20!
BUG
Code:
Private Mode Not Work
Credits
Samsung for Stock Rom
@Chainfire for Supersu
@Albe95 for some S7/N7 apps
@mygalaxya for Launcher+Themes support
@ashyx for TWRP Recovery
Sorry If I Missed Anyone, PM me and I will Add
Rom Information
[ROM] [6.0.1] [GS]Mod v1
ROM OS Version: 6.0.1 Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: v 1
Stable Release Date: 2016-10-9
Created and Updated
Created 2016-10-9
Last Updated 2016-10-9
DOWNLOAD
MEGA
Changelog:
9/10/2016
* Initial release
Click to expand...
Click to collapse
Res...
Awesome.. onto it! Will report and let you know how I go.
Was there any instructions to flash this ROM? Clean, wipe cache, data etc? Can we flash it coming from a lollipop ROM?
Sent from my SM-A300FU using XDA-Developers mobile app
MpandAUS said:
Awesome.. onto it! Will report and let you know how I go.
Was there any instructions to flash this ROM? Clean, wipe cache, data etc? Can we flash it coming from a lollipop ROM?
Click to expand...
Click to collapse
Yes you need full wipe. Im not sure if it work from lollipop but i think it work.
Fantastic work mate, looking forward to testing this to perfection .
Much, much needed option.
PlutoDelic said:
Fantastic work mate, looking forward to testing this to perfection .
Much, much needed option.
Click to expand...
Click to collapse
Thia rom is basic for stable test. Im working in systemui,secsetting, and reboot menu now.
Looks nice. Would I be right in thinking, that apart from the Samsung apps listed, all the other bloartware has been removed?
Eserim said:
Looks nice. Would I be right in thinking, that apart from the Samsung apps listed, all the other bloartware has been removed?
Click to expand...
Click to collapse
No, its not debloated, because im working in aroma script debloated
[GS] said:
Yes you need full wipe. Im not sure if it work from lollipop but i think it work.
Click to expand...
Click to collapse
Can u lead us how to install ?! (TWRP or something ?... links to)
g0didit said:
Can u lead us how to install ?! (TWRP or something ?... links to)
Click to expand...
Click to collapse
Download the Rom zip and copy it to your SD Card
Now enter TWRP recovery mode
*Delete Cache, Dalvik Cache,System, Data
then
*Flash the Rom zip From SD Card
*Reboot Device.
Be patient!! Boot time is around 15 min, but could take up to 20!
[GS] said:
Download the Rom zip and copy it to your SD Card
Now enter TWRP recovery mode
*Delete Cache, Dalvik Cache,System, Data
then
*Flash the Rom zip From SD Card
*Reboot Device.
Be patient!! Boot time is around 15 min, but could take up to 20!
Click to expand...
Click to collapse
I had TWRP on 5.1.1 is it same TWRP work on 6.0.1 ?
Thanx
g0didit said:
I had TWRP on 5.1.1 is it same TWRP work on 6.0.1 ?
Thanx
Click to expand...
Click to collapse
Use TWRP by Ashyx
port for sm à300h
Hey please port it a3 sm à300h .please please
zuhaibsarwar said:
Hey please port it a3 sm Ã300h .please please
Click to expand...
Click to collapse
A300H is not updated to Marshmallow, and i dont have device to test s7/n7 apps
Nice ROM. It works on A300FU/A300Y, coming from lollipop with RR custom rom without downloading OTA or stock firmware from samimobile, I restored back to stock boot + kernel before flashing the latest recovery by ashyx (3.0.2) then wipe cache, data, system and flash [GS]Mod.zip file through TWRP recovery. WiFi isn't working but mobile data is. I'm also from Australia n we haven't had any updates in weeks.
MpandAUS said:
Nice ROM. It works on A300FU/A300Y, coming from lollipop with RR custom rom without downloading OTA or stock firmware from samimobile, I restored back to stock boot + kernel before flashing the latest recovery by ashyx (3.0.2) then wipe cache, data, system and flash [GS]Mod.zip file through TWRP recovery. WiFi isn't working but mobile data is. I'm also from Australia n we haven't had any updates in weeks and weeks
Click to expand...
Click to collapse
Some people have WiFi issue when come from 5 .0.2 to 6.0.1. So try to first install Stock rom marshmallow with odin( and test WiFi if work). 2) install TWRP. 3) Flash my rom. (Sorry for my poor english)
I will be tester for a3 sm à300h.when a300h update to mm
zuhaibsarwar said:
I will be tester for a3 sm Ã300h.when a300h update to mm
Click to expand...
Click to collapse
Tell me when a300h get marshmallow
MpandAUS said:
Nice ROM. It works on A300FU/A300Y, coming from lollipop with RR custom rom without downloading OTA or stock firmware from samimobile, I restored back to stock boot + kernel before flashing the latest recovery by ashyx (3.0.2) then wipe cache, data, system and flash [GS]Mod.zip file through TWRP recovery. WiFi isn't working but mobile data is. I'm also from Australia n we haven't had any updates in weeks.
Click to expand...
Click to collapse
Try flashing the latest Modem/Bootloader for A3Y.
PS, are you flashing A3FU stuff on your A3Y?