Hi all,
I have a Xperia Z (C6603). (I'm from the Netherlands btw) I have unlocked the bootloader and rooted my telephone today. Then I wanted to install CWM. So I downloaded a few files to do this (a kernel from Doomlord) and a Fastboot package. I started my phone in Fastboot, installed the drivers but the command 'fastboot flash boot boot.img' didn't work as it kept waiting for my device.
And then I did something stupid. I started Flashtool and it saw my device in Fastboot mode. I then selected Flash in Fastboot mode and in the pop-up screen I chose 'Select kernel to Hotboot' and then I selected the boot.img I had downloaded. It said Okay and Okay, then gave the message that my device was disconnected and should be rebooting but it didn't!!!
It now is still in some sort of fastboot mode as the blue light is still burning but nothing happens. I can't switch it off, windows doesn't recognise the phone, PC Companion doesn't see anything and Flashtool says 'device disconnected' and I am slowly getting desperate... I have a tiny hope that, when the battery has run out, it might come back to life...
I have tried it on all my usb-ports but nothing happens!
Is there anybody out there who has an idea what to do?
a look at this topic. I hope you can bring your XZ back to life.
http://forum.xda-developers.com/showthread.php?t=2229250
C.Eduardo said:
a look at this topic. I hope you can bring your XZ back to life.
http://forum.xda-developers.com/showthread.php?t=2229250
Click to expand...
Click to collapse
THX!!!!!
It was as easy as pressing Vol-UP and Power at exactly the same time (as described in the topic you send)!!! It's working again!!!
TheDjave said:
THX!!!!!
It was as easy as pressing Vol-UP and Power at exactly the same time (as described in the topic you send)!!! It's working again!!!
Click to expand...
Click to collapse
lmao saved me almost 10 years later thx
hey guys,
since the lat update is online for the xperia x, my phone shows me that i can download and patch it automaticly. phone downloaded the rom, try to falsh it in twrp, restarts, but then it stucks at the white screen with the sony logo. i runned this for 2 hours, nothing happens. restartet in recovery mode, installed back to 7.1.2, phone works fine again. downloading the 8.1 rom and install it with twrp also ends in the same result.
someone of u have the same problems? is there an solution?
greetz
-xmo- said:
is there an solution?
Click to expand...
Click to collapse
Is ur device on latest bootloader?
how can i get that information?
[/URL]
-xmo- said:
how can i get that information?
Click to expand...
Click to collapse
The following is not my knowledge, all Points goes to my friend @nailyk .
Type in Linux Terminal:
-su
-adb shell
-su
-cut /proc/cmdline
The marked in the photo is my bootloader.
Is there a solution?
Hi,
I have the same problem like -xmo-.
Is there any solution at hand?
Bootloader is 1299-4841 1299-4841_S1Boot_MSM8956_LA1.0.1_N_164_-C
Kind regards
Kim - and I'm not a robot.
KimBrin86 said:
Hi,
I have the same problem like -xmo-.
Is there any solution at hand?
Click to expand...
Click to collapse
Did u flash the OEM 'v10_loire.img' from #1 before Omni 8.1?
Hi MichaBit,
thanks for your reply. All I did was:
Unlocked the Bootloader in accordance to sony developers instructions
Some fastboot magic (to me) and transfer TWRP to the phone
Wiped the phone
Transferred the omnirom image
Installed the image
Problem (as written) occured
Used Sony Flash Tool to recover the phone to Android 7 something
What is this ominous loire image you mentioned?
Did I miss some elementary steps?
Kind regards
Kim - Turing tested and still not a robot.
KimBrin86 said:
What is this ominous loire image you mentioned?
Did I miss some elementary steps?
Click to expand...
Click to collapse
To install Omni 8.1 requires two steps more, a small download (ODM) and flashing the extracted image in fastboot mode.
All answers and steps you'll find in attached link - i wish you success. :fingers-crossed:
https://forum.xda-developers.com/xperia-x/development/rom-omnirom-t3734793
Hi MichaBit,
your solution helped me; every thing is fine now.
Thanks!
Kind regards
Kim - will hit the I'm not a robot button.
Hello, I have a huge problem with my XIAOMI MI9 EXPLORER EDITION The system of my phone is totally destroyed and all what I can do is bring it in the FASTBOOT mode. A friend who know a lot did over TeamViewer some work. He try to FLASH the phone , but the UNLOOK TOOL don't recognize the phone. He told me the only possibility would be open the phone and bringing it like this in the EDL MODE. The phone is like brand new and I would like to search another possibility for fixing it. Right now I am in KUWAIT lo for the Corona Virus. I would welcome each kind of help.
Yeah, the only way to flash MIUI again would be to get the phone into EDL Mode and from what I have tried the only way to do this is by taking the phone apart and bridge the pins. What happens when you hold volume up and power and boot to system?
VortexHD said:
Yeah, the only way to flash MIUI again would be to get the phone into EDL Mode and from what I have tried the only way to do this is by taking the phone apart and bridge the pins. What happens when you hold volume up and power and boot to system?
Click to expand...
Click to collapse
It goes only to FASTBOOT
Claudio44 said:
It goes only to FASTBOOT
Click to expand...
Click to collapse
When you connect it to a PC what happens when you type "fastboot reboot system"?
VortexHD said:
When you connect it to a PC what happens when you type "fastboot reboot system"?
Click to expand...
Click to collapse
Nothing happend
Claudio44 said:
Nothing happend
Click to expand...
Click to collapse
Hello, If you haven't managed to fix it yet try this tool and use it to flash stock rom.
https://forum.xda-developers.com/Mi-9/how-to/guide-xiaomitool-v2-flashing-eea-ru-cn-t3934966
Can anyone please help me? I did the all steps but nothing works and I get the STATUS_EXT_RAM_EXCEPTION (0xC0050005) error... The only solution I found is to drain the battery while the device is bootlooping but sadly, my phone vibrates 1 second and dies because there is no fastboot or recovery or nothing to boot with, I tried SP Flash Tool but it stucks at Download DA 100% then shows me the ram error. PLEASE HELP ME
P.S: I know people will say MTK Bypass is a virus but please ignore it and focus on my main subject
Use latest fastboot rom and download agent to mtk all.bin
Restart phone by power+ volume key
Also usb dk driver and libusb tool
Or remove back cover and battery take care with fingerprint
Already done everything you said, nothing works.
iOussamato_ said:
Already done everything you said, nothing works.
Click to expand...
Click to collapse
Try again
faisal9666 said:
Try again
Click to expand...
Click to collapse
What do you mean try again? I tried it 50 times and still doesn't work, tried so many other roms and DAs and NOTHING
iOussamato_ said:
What do you mean try again? I tried it 50 times and still doesn't work, tried so many other roms and DAs and NOTHING
Click to expand...
Click to collapse
Very strange
STATUS_EXT_RAM_EXCEPTION (0xC0050005)
1.
Hello bro, I only registered on XDA to inform you and gonna post on other thread for people suffering from this error.
2.
I have redmi 9c angelica
3.
I had the same issue like yours. Just fixed it 2,3 mins ago after many days of suffering. I tried 3 fastboot roms in which only this work (angelica_global_images_V12.0.12.0.QCRMIXM_20210412.0000.00_10.0_global). I hope it also work with you. Give a try
i followed this and boom now all of my stress has been released.
Firmware link
How to Unbrick Redmi 9C (angelica) without using auth account. Tested and working! - OmBob Opreker
This is tutorial how to unbrick Xiaomi Redmi 9C (angelica) using mediatek bypass tool and sp flash tools without using mi auth account using global stock
ombob.my.id
iOussamato_ said:
Can anyone please help me? I did the all steps but nothing works and I get the STATUS_EXT_RAM_EXCEPTION (0xC0050005) error... The only solution I found is to drain the battery while the device is bootlooping but sadly, my phone vibrates 1 second and dies because there is no fastboot or recovery or nothing to boot with, I tried SP Flash Tool but it stucks at Download DA 100% then shows me the ram error. PLEASE HELP ME
P.S: I know people will say MTK Bypass is a virus but please ignore it and focus on my main subject
Click to expand...
Click to collapse
use this video 100% working
Device locked and need test point. You can't use MTK bypass and SP Flashtool directly. Your device may have patch on July 2022 and newest version (12.5.3 and above).
And if you see 3 dot pin for TP, it's Redmi 9c but if you found only 1 point (for TP), it's Redmi 9c NFC.
Remember to use TP for any operation and if not work, TP with Professional software.
demoimoet said:
Device locked and need test point. You can't use MTK bypass and SP Flashtool directly. Your device may have patch on July 2022 and newest version (12.5.3 and above).
And if you see 3 dot pin for TP, it's Redmi 9c but if you found only 1 point (for TP), it's Redmi 9c NFC.
Remember to use TP for any operation and if not work, TP with Professional software.
Click to expand...
Click to collapse
where are test points located?
Exact same issue,
exact same error,
exact everything.
I ended up flashing using KERDISH Team's SP Flash Tool BUT it still does not wanna boot
When I press the combination to boot into fastboot it vibrates but and shows a screen for a split second.
When I try to boot it up normally it just shows again a screen for a split seccond
And when I try to boot into recovery using again the combination it shows AGAIN the screen for a split secconds
Any help appriciated!
ax0 said:
Exact same issue,
exact same error,
exact everything.
I ended up flashing using KERDISH Team's SP Flash Tool BUT it still does not wanna boot
When I press the combination to boot into fastboot it vibrates but and shows a screen for a split second.
When I try to boot it up normally it just shows again a screen for a split seccond
And when I try to boot into recovery using again the combination it shows AGAIN the screen for a split secconds
Any help appriciated!
Click to expand...
Click to collapse
did you try Yurian's post info, my phone was totally bricked and thats what kinda worked, I left extensive guides on how I did it on there too
also, here are the files that worked for me (redmi 9a, not the exact same but its pretty similar)
your ROMs should be these (use the fastboot one, to the best of my knoledge, the recovery one only changes the recovery hence, its useles to unbrick) if that doesnt work try ROMs for different regions or a one previous version (I dont recomend this because MI is super against downgrading so they f-up your phone if you try) always with the fastboot one
the scatter should be on ROM/images
if that scatter doesnt work, try the ones I provided, theyre for a different version but hey, in for a pound, if its already hard bricked you may as well try crazy stuff, I would suggest you look for the correct scatters online, but I have some slight experience looking for android files and I couldnt find any that are the correct ones.
Lastly, Im just a nobody that unbricked his device and got a little confident, I know next to nothing about phone config, that said, I do think I know more than most but I dont know if scatter files are completely imposible to be compatible between versions or even the ROMs, most Custom ROM work in both 9a and 9c so I think they might, but IDK.
Ivan.Adriazola said:
did you try Yurian's post info, my phone was totally bricked and thats what kinda worked, I left extensive guides on how I did it on there too
also, here are the files that worked for me (redmi 9a, not the exact same but its pretty similar)
your ROMs should be these (use the fastboot one, to the best of my knoledge, the recovery one only changes the recovery hence, its useles to unbrick) if that doesnt work try ROMs for different regions or a one previous version (I dont recomend this because MI is super against downgrading so they f-up your phone if you try) always with the fastboot one
View attachment 5859871
the scatter should be on ROM/images
if that scatter doesnt work, try the ones I provided, theyre for a different version but hey, in for a pound, if its already hard bricked you may as well try crazy stuff, I would suggest you look for the correct scatters online, but I have some slight experience looking for android files and I couldnt find any that are the correct ones.
Lastly, Im just a nobody that unbricked his device and got a little confident, I know next to nothing about phone config, that said, I do think I know more than most but I dont know if scatter files are completely imposible to be compatible between versions or even the ROMs, most Custom ROM work in both 9a and 9c so I think they might, but IDK.
Click to expand...
Click to collapse
Hello! Thanks so much for replying
I still get the same issue, it just shows a screen for a split secconds and then turns off
if you wan
ax0 said:
Hello! Thanks so much for replying
I still get the same issue, it just shows a screen for a split secconds and then turns off
Click to expand...
Click to collapse
t to some day we could hop on a discord call and see if I can help you in any way, although I doubt it since our hardwares arent exactly the same
Ivan.Adriazola said:
if you wan
t to some day we could hop on a discord call and see if I can help you in any way, although I doubt it since our hardwares arent exactly the same
Click to expand...
Click to collapse
sure my discord is axon#7061
same problem but fixed,try tft free tool.here are the steps.
1.remove battery connection,do not connect untill flashed
2.open tft tool,go to mtk section flash scatter
3.connect mobile while holding both volume bouttons
4.now tft tool starts flashing but failed & rebooting device
5.now remove cable & connect battery,bootup
Hoping this should work for you,mine is fixed that way
brav3h3ar8 said:
same problem but fixed,try tft free tool.here are the steps.
1.remove battery connection,do not connect untill flashed
2.open tft tool,go to mtk section flash scatter
3.connect mobile while holding both volume bouttons
4.now tft tool starts flashing but failed & rebooting device
5.now remove cable & connect battery,bootup
Hoping this should work for you,mine is fixed that way
Click to expand...
Click to collapse
thank you so much
idk why but TFT managed to fix it!
ax0 said:
thank you so much
idk why but TFT managed to fix it!
Click to expand...
Click to collapse
It's my pleasure
ax0 said:
sure my discord is axon#7061
Click to expand...
Click to collapse
Hello, please add me, I'm desperate how to do this :-(
ax0 said:
Exact same issue,
exact same error,
exact everything.
I ended up flashing using KERDISH Team's SP Flash Tool BUT it still does not wanna boot
When I press the combination to boot into fastboot it vibrates but and shows a screen for a split second.
When I try to boot it up normally it just shows again a screen for a split seccond
And when I try to boot into recovery using again the combination it shows AGAIN the screen for a split secconds
Any help appriciated!
Click to expand...
Click to collapse
Hi,
Just follow the steps and you'll be good.
[Guide] How to unbrick redmi 9C by flashing with SP Tools without Auth file(Tested Working)
This is a last ditch effort to restore your phone to working order. This should only be used if your phone DOES NOT BOOT AT ALL or if you are unable to boot into FASTBOOT. If you can boot into Fastboot mode then I would encourage you to flash...
forum.xda-developers.com
I already tried it with my device and it works well.
Hello,
could someone help me? I got this phone. where only the REDMI logo is displayed and restarted.
First time when I connected the phone and pressed vol.down and pwr btn. fastboot mode loaded. Tried loaded recovery but pwr up didnt work.
I downloaded stock rom and I wanted to flash. But phone turnned off and did not load again to fastboot. (I did nothing, I had only connected phone via usb and watching fotbal)
When I connect without battery and holding down and up shows mediatek com 3 but it will disappear after a while.
Canot load to fastboot and canot load to recovery. Tried miflash but device doesnt show.
Do you have any seizures? solution ?
thank you. I am ready to donate for good tips
willda2122 said:
Hello,
could someone help me? I got this phone. where only the REDMI logo is displayed and restarted.
First time when I connected the phone and pressed vol.down and pwr btn. fastboot mode loaded. Tried loaded recovery but pwr up didnt work.
I downloaded stock rom and I wanted to flash. But phone turnned off and did not load again to fastboot. (I did nothing, I had only connected phone via usb and watching fotbal)
When I connect without battery and holding down and up shows mediatek com 3 but it will disappear after a while.
Canot load to fastboot and canot load to recovery. Tried miflash but device doesnt show.
Do you have any seizures? solution ?
thank you. I am ready to donate for good tips
Click to expand...
Click to collapse
Try this:
Thread '[GUIDE] UNBRICK YOUR HARD-BRICKED MTK' https://forum.xda-developers.com/t/guide-unbrick-your-hard-bricked-mtk.4564029/
1lopes said:
Try this:
Thread '[GUIDE] UNBRICK YOUR HARD-BRICKED MTK' https://forum.xda-developers.com/t/guide-unbrick-your-hard-bricked-mtk.4564029/
Click to expand...
Click to collapse
Thank you for reply. I will try
Were you able to solve it? I am in the same situation and I don't know what to do, the only difference is that my PC detects it
TheZian said:
Were you able to solve it? I am in the same situation and I don't know what to do, the only difference is that my PC detects it
Click to expand...
Click to collapse
1lopes said:
Try this:
Thread '[GUIDE] UNBRICK YOUR HARD-BRICKED MTK' https://forum.xda-developers.com/t/guide-unbrick-your-hard-bricked-mtk.4564029/
Click to expand...
Click to collapse