Database Develop

[Resurrection Remix] [Unofficial] [2018-08-19] Treble [Discontinued moved to PIE]

LAST PERSONALLY Verified as working and "stable"*: GAPPS, 8/19 GAPPS
First and foremost, I'm simply compiling this for the OnePlus 6 and am making some small tweaks to include Opengapps and not only Go Apps in the builds.
The parent for this by phhusson can be found at [Resurrection Remix] [Unofficial] [2018-05-19] Phh-Treble
Next the most important information where to get the most current build of the ROM: Google Drive
For now I suggest the version ending in -go such as: 'rr_6_1_180616_system-arm64-ab-go.img.xz' as the '-gapp' is in development, I expect a number of builds over the next few days as I finally the build scripts and then the rate to tapper off to every two weeks or as there are changes that seem to warrant it, I'm not building nightly for no reason, as RR 6.1 is reasonable stable at this time.
Note: Attached (build.sh) is the build script currently being used, it is a work in progress. and will be updated in case you more regular builds. You will need 12GB of Ram Ubuntu 16.04+ (I'm using 18.04 now, but I started with 16.04) and at least 360GB (SSD recommended) to build, and upto 6 hours for the initial run and then 2 for ever additional run.
Many thanks to phhusson for allowing me to post this based off of his work.
Changes, when I have something to report. Not all build will:
The 7/7 build includes a number of patches recommended by DocRambone.
Overlay support to force Apps fullscreen, Under Display->Advanced
Some cleanups to the UI for the round corners
Better LED support
The 7/8 build is the same as 7/7, but includes July security patches, I built it in order to match the official release.
The 7/24 build is again to match the official release
The 8/19 build is again to match the official release, note regression in status bar height I'm looking into.
Second post: will have details on what is working and not
Third Post: will have full instructions on installation, backup restore based on my experiences
* Stable is relative, for me if I consider it usable from day to day it is stable.

As of 8/11/2018
In the GAPPS version
Working:
Fingerprint
Camera (Front and Back) + Flash (Also got the OnePlus Camera working*)
Speaker
Wifi (Some cut outs seen, this is not unique to this ROM and is dependent on the access port some are worse than others, no clue why)
Bluetooth
GPS
Brightness
Slider for Notifications as of 6/18 build
Mobile Data/Voice (tested dual SIMM is working)
Google Apps
Root (using magisk 16.3), told but have not personally tested that 16.4 without changes works as well
Ambient (works serious effect on battery see next post)
Full Screen Aspect Ratio Display->Advanced 7/07/2018 build+
More fully functional LED Improved for at least mounting USB sticks in 7/7 build
USB Host - Fixed for at least mounting USB sticks in 7/24 build
Bluetooth Phone audio is on the local headset. - Fixed in 7/24 build
Seems working NFC working 5.1.11 Vendor and Boot, not working with previous to 5.1.9 Vendor and Boot I have nothing to connect to to fully test
Not Working:
The Notch hides content (need to wait for P)
Unknown:
Camera Quality: I do little with the camera and am no photographer, so I can say nothing about quality, only it installed and took pictures
VaSU# said:
volte kinda works you can receive messages and calls and can send messages but cant call "out"
Click to expand...
Click to collapse
Please let me know if anything is missing, or needs to be added

Instructions to flash, backup ...
WARNING: With 5.1.8 I had no WIFI, so I suggest sticking to 5.1.6 to 5.1.7 FOR THE MOMENT
Instructions to flash, backup ...
Total time required about 90 minutes
Pre-Reqs:
First and foremost:
Start with at least 5.1.6 (or greater, as of writing 5.1.7 was the lastest), there are Treble fixes in 5.1.6 we need.
Second
verify you have a good USB cable (the Red one shipped with the phone is best)
Three
download the oneplus drivers and abd
- USB Drivers: OnePlus 6 USB Drivers for Windows
- ADB/Fastboot: ADB/Fastboot latest mini
Install both to your local system
Four
Download the latest TWRP (get both the img and zip files)
TWRP for OnePlus 6
Five
Download the files(Treble OP6 Files 5.1.6) from:
GUIDE] How to flash Treble roms on OnePlus 6
Extract and keep: vbmeta.img (if you are on 5.1.X where is the boot version you can keep the boot.img as well, if not discard).
Six
Download the lastest Oxygen OS ZIP and bootloader from:
[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates
As of writing this is:
5.1.6 full image: OnePlus6Oxygen_22_OTA_010_all_1806070151_ad8b19ed516e78.zip
5.1.6 boot: OnePlus6Oxygen_22_OTA_010_all_1806070151_boot.img
Seven
Download Device ID:
Device+ID APK
Eight
Download Magisk for Treble:
Magisk modified for treble
Since as of 6/2018 the default magisk does not support Treble we need a special version I suggest: Magisk-v16.3-factory-faizauthar12-20180406.zip as teh latest I could find with support.
Nine
Recommended download fastboot installable 5.1.6 (or latest build):
[ROM][STOCK][FASTBOOT][OP6] Stock Fastboot ROMs for OnePlus 6
Ten
Include Overlay/Ambient Display.
Download APK at: [Overlay] Enable Night Light, Auto-Brightness, Ambient Display & more on Treble ROM
Eleven
OnePlus Camera:
OnePlus Camera APK's
Finally
Download RR 6.0 for Treble compiled after 7/08/2018:
Either download the gapps or go version (gapps is still a work in progress when I wrote this)
ROMs Google Drive
Getting Ready:
WARNING: you will loss all data on your phone, backup anything you want or need, first.
Make sure you can get to fastboot (enable "Advanced Reboot" in developers options and make sure that you can enter on a reboot by pressing volume-down and power at the same time)
Make sure you are on 5.1.6+ (5.1.6 was the latest firmware upon writing this)
Remove Any security you have set (just to be safe)
Reboot to fastboot (bootloader)
run:
Code:
fastboot oem unlock
"You will be greeted with a Unlock Bootloader Warning page, Hit the Vol button to select Yes and turn it Blue and Hit the Power Button to Execute the selection, allow your device to reboot"
Backup EFS
If you have not already I'd recommend backing up EFS (to do so you need to be rooted, or else use TWRP):
Preferred, if rooted simply open a terminal and run:
Code:
su
dd if=/dev/block/sdf2 of=/sdcard/modemst1.bin bs=2048
dd if=/dev/block/sdf3 of=/sdcard/modemst2.bin bs=2048
Copy these files someplace safe!
If not rooted reboot to fastboot (bootloader):
Ensure that the latest twrp is in the same directory as fastboot (C:\Program Files (x86)\Minimal ADB and Fastboot) and run (3.2.1 was the lastest as of writing this):
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
This will boot the phone into twrp
Allow modification
Select backup
select only EFS and Modem
enter a meaningful name
swipe to backup
click "Reboot System" -> "Do not Install" for TWRP if asked.
You can now locate the backup under /storage/TWRP/BACKUPS and move it to a safe location off the phone.
Backup the Phone
Recommended if you care: Backup your entire phone using TWRP as well:
Ensure that the latest twrp is in the same directory as fastboot (C:\Program Files (x86)\Minimal ADB and Fastboot) and run (3.2.1 was the lastest as of writing this):
- fastboot.exe boot twrp-3.2.1-0-enchilada.img
This will boot the phone into twrp
Allow modification
Select backup
Select Everything except EFS and Modem
enter a meaningful name
swipe to backup
click "Reboot System" -> "Do not Install" for TWRP if asked.
You can now locate the backup under /storage/TWRP/BACKUPS and move it to a safe location off the phone.
Installing RR:
Finally we are ready to install RR (or any other Treble ROM), on the OnePlus 6. You will need a build from 6/7/2018 or later to have the required Vender-Hal to be present.
You will need to locate and install the AB version for the OnePlus 6.
Note: I'm using RR from 6/13 as the base for the guide: system-arm64-ab-gapps.img
SEE FIRST POST FOR CURRENT DOWNLOAD LOCATION I compiled this using phhusson's (Orginial Build Scripts)
instructions and a bit of setup on Linux. However most Treble base ROM's should work so long as they are from after 6/7/2018 in a similar manor.
* Remember this will wipe your device and you will loss all data *
First
boot in to fastboot (bootloader):
We need to go back to TRWRP and wipe internal storage and data to be safe, as the -w option to do so when flashing is not working for me.
- fastboot.exe boot twrp-3.2.1-0-enchilada.img
This will boot the phone into twrp
Allow modification
Select Wipe
Advanced Wipe
Select Cache, Data and "Internal Storage"
Swipe to Wipe
Click back until you are at the main menu
Click on Reboot
Click on Bootloader -> "Do not Install" for TWRP if asked.
Second
Flash the new ROM:
Flash vbmeta.img to remove validation
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
To be safe flash a default boot image (5.1.6 in this case)
Code:
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
Next reboot into recovery (you need to do this with volume down +Power, or selecting from bootload):
In stock recovery select English
Select Wipe Data and Cache
Reset system settings->yes->done
Wipe Cache->Yes->done
Erase everything->Thiscan not be undone, continue->done
back
Advanced
Reboot to fastboot->Reboot to fastboot
Now flash a the new ROM:
- fastboot flash system_a system-arm64-ab-gapps.img
- fastboot flash system_b system-arm64-ab-gapps.img
Three
reboot:
Code:
fastboot reboot
You will see the "andorid" boot screen (this is different that the Oxygen one) and being the first boot it could take a while. If you see no boot screen or it does not boot (give 10 minutes), then you likely need to repeat these steps again. If you boot into RR then continue.
You may get a Vender image mistake error ignore it it only appewars on boot.
Skip the Setup by clicking all four corners top left->top right->bottom right->bottom left (it my take more than one try), at this point you have no networking, that is what we want.
Suggestion make backup here as you have a working OS! -- Instructions to follow
Four
Move over required files: You now have RR installed and working:
Enable developer mode and then enable Advanced Reboot
Then copy over gapps-nano, Device+ ID.apk, magisk-manager apk and magisk installer zip to the phone
To get the magisk manager you need to extract it from the zip as I cloud not get the normal one to install. Extract the zip: Magisk-v16.3-factory-faizauthar12-20180406.zip copy common\magisk.apk to the phone
Five
Deal with: "Play Services not Certified by Google":
Install Device+ID (APK downloaed above) and Open
Once done open the second line shows the GSF ID for this device
Android Register GSF
Login using a gmail account (I suggest the one you use for the playstore)
Enter the GSF in the field, now we wait about 5 to 10 minutes for it to propigate
Reboot the phone as we want paly services to start fresh
First add a wIFI network.
Critical do not let any apps update until you have registered playstore, so if you see a notification saying downloading, select and click pause. Doing so with the updated 6/17 paystore resulted in a black screen where you would enter your password, no know work around other than reset if this happens.
click on playstore it should now start
Now login to your account and you should be go (it may take more than one attempt no idea why).
Now enable the update if previously paused
Update all Apps from the playstore before continuing, this may take a while give it 10 minutes
Optional: If you want remove Device+ID now (but I leave it as it is an easy way to get information).
You now have a working Playstore, if you have hung downloads then you may need to clear the cache for play services and the playstore I assume the unregistered might be the cause of them getting messed up.
Five
Install magisk:
Ensure you copied magisk zip and also the magisk manager apk to your phone, do not open, but click Done
Install the magisk manager, by locating the file in filemanager and selecting it.Reboot into fastbboot (bootloader) mode
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Install
Select the magisk zip from the filesystem and flash
clear cache
Reboot->System (If asked about installing TWRP swipe to install)
Allow the phone to fully boot
Suggested: Reboot the phone
Suggested: disable checks for updates as 5.7 does not work with this build.
Root is now setup.
Six
Installer th onPlus camera:
Many people want the one plus camera, copy the apk downloaed above to the phone.
Open and install via a file manager
Seven
resize Data (as it will be only 11GB), the partitioon will be larger, depending on your devide se we will use TWRP and resize2fs to grow it.
Reboot into fastbboot (bootloader) mode
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Advanced->Terminal
Code:
resize2fs /dev/block/sda17
Reboot System
Eight
Recommended, make a backup of your hard work:
Reboot into fastbboot (bootloader) mode
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Select backup
Select Everything except EFS and Modem (as I'm unsure exactly which you need)
enter a meaningful name
swipe to backup
click "Reboot System" -> Swipe to reboot
Once back in RR copy the backup off the phone
Eight
Start using your OnePlus 6 with RR 6.0, rooted and with GAPPS
Nine
Upgrading:
Upgrading is simply replacing the system partitions and only these paritions (tested going from 6/13->6/16->6/17 builds)
Boot into fastboot (advanced reboot options)
Now flash the new system files:
- fastboot flash system_a new_system-arm64-ab-gapps.img
- fastboot flash system_b new_system-arm64-ab-gapps.img
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Select Wipe
Advanced Wipe
Select Cache (and only Cache)
Swipe to Wipe
Reboot System
Ten
Restoring a Backup from TWRP
*This is a work in progress I can not work out how to do so safely*
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Select Restore
Select the backup
Select Everything (other than EFS and Modem!)
Got to the main menu
Select Wipe
Advanced Wipe
Select Cache (and only Cache)
Swipe to Wipe
Reboot Fastboot
Eleven
Night Light, Ambient Display, requires Root:
My suggestion is not to do this if you care abut battery as I've seen major drain (even with Ambient display disabled, testing this).
Copy the apk downloaded framework-res__auto_generated_rro.apk to /vendor/overlays
Code:
mount -o rw,remount -t ext4 /vendor
cp <location of file> /vendor/overlay
chcon u:object_r:vendor_overlay_file:s0 /vendor/overlay;chcon u:object_r:vendor_overlay_file:s0 /vendor/overlay/framework-res__auto_generated_rro.apk
Reboot
Comments:
TWRP does not boot if flashed onto RR (the TWRP logo appears but it will not boot), this is currently only go to protect you from using the OnePlus Recovery and messing up RR. Flashing TWRP does not affect booting into RR.
TWRP DOES handle encryption without an issue, even a wrong first pin is not an issue
TWRP making a backup of Treble ROM, backup everything for now: Data, Boot, System, System Image, Vendor, Vendor Image.
If you have problems with hung downloads from the Playstore: Pending hung PlayStore
Wifi can be flaky (appearently this is a more general issue as even stock had some issues, I fixed them by only using either 2.4 or 5Mhz wireless, if I had both active I had constant disconnects.
Worst case, to recovery, back to Oxygen 5.1.6 if you end up in a boot loop stuck booting to rtecovery, etc:
- flash-all.bat
Reboot into recovery (you need to do this with volume down +Power, or selecting from bootload):
In stock recovery select English
Select Wipe Data and Cache
Reset system settings->yes->done
Wipe Cache->Yes->done
Erase everything->This can not be undone, continue->done
back
Advanced
Reboot to fastboot->Reboot
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Copy the Oxygen full ROM back to the phone
Code:
adb push OnePlus6Oxygen_22_OTA_010_all_1806070151_ad8b19ed516e78.zip /sdcard
In TWRP
Install
Select OnePlus6Oxygen_22_OTA_010_all_1806070151_ad8b19ed516e78.zip
Go back to the root and select Advanced Wipe
Select Wipe
Advanced Wipe
Select Cache, Data and "Internal Storage"
Click on Reboot->Recovery (select Do not Install)
English
Wipe Cach and Data
Wipe Everything
Reboot
The phone will reboot same as the day it was made
If it does not then please refer to:
Mega Unbrick Guide for A Hard Bricked OnePlus 6
Note: Always boot fully at least once (I suggest twice and the first one is configuring android) before trying any steps above again.
Best of Luck, see a typo let me know
ERIC

thank you for this

[emoji102][emoji102][emoji102][emoji102][emoji102]
Sent from my ONEPLUS A6003 using Tapatalk

Thank you for putting so much hard work on this. Really much appreciated, will give it a try.

Might be a noob question, but due to treble, is the camera quality the same with the OnePlus app?

saintxseiya said:
Might be a noob question, but due to treble, is the camera quality the same with the OnePlus app?
Click to expand...
Click to collapse
No.

Great rom, I especially like the fact that I can choose to install without gapps (prefer fdroid). One thing that is missing is ambient display, hopefully it will be fixed sooner or later.

Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Abaddon said:
No.
Click to expand...
Click to collapse
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?

Pat123 said:
Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?
Click to expand...
Click to collapse
same quality here

Pat123 said:
Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?
Click to expand...
Click to collapse
Never said anything about results, only that it could be installed and works, (takes pictures), personally I do little with the camera and am not photographer, but it can be installed (link above) and installed.
Updated the working to remove any confusion.

Maibol said:
same quality here
Click to expand...
Click to collapse
Could you post some comparison pics? Including portrait shots.
Would be awesome.

saintxseiya said:
Could you post some comparison pics? Including portrait shots.
Would be awesome.
Click to expand...
Click to collapse
sorry bro celebrating today with the family too much beer .....

So seeing this not even a month after the release of the op6 makes me happy and hopeful that we get a fully working RR-OS for the OP6 in the near future !

Pat123 said:
Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?
Click to expand...
Click to collapse
because Oneplus doesnt release blobs for camera

Pat123 said:
Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?
Click to expand...
Click to collapse
It will never be the same as OOS stock. Because aside from there is no device tree provided by OnePlus, they will never release the camera blobs due to licensing issues. Once we get a stable and proper gcam port. It'll be better than the stock OOS cam or close

is a beautiful Rom, will there be an adaptation for twrp? I have to use the gapps, because at the go version Wear OS does not work. and in the gapp version would be nice if the smartbar was running. Unfortunately, the kill app does not work ( I can not use xposed, then my bank app will not work anymore

unix2208 said:
is a beautiful Rom, will there be an adaptation for twrp? I have to use the gapps, because at the go version Wear OS does not work. and in the gapp version would be nice if the smartbar was running. Unfortunately, the kill app does not work ( I can not use xposed, then my bank app will not work anymore
Click to expand...
Click to collapse
TWRP not for now as treble is build as an image, but you should be able to flash using twrp just switch to img (though I have not tested that).
The GApps version is posted the 6/18 is working great, see second post.
As for Banking I'm unsure if any Treble based ROM passed the checks, as with or without root, as they appear as unsigned.
As for smartbar, I'll give it a try when I get a chance, as I do not use it personally.
ERIC

So safetynet won't pass?

[GUİDE] [ROM] [10] How to install Pixel Experience ROM for Redmi 8 [GSI]

First of all, the download link of all the files required for this "ROM" is taken from the "xda developers forum" posts.
I was constantly experimenting with GSI roms for Redmi 8. I was able to install the Pixel ROM on Redmi 8. I don't think you will have a problem if you follow the steps I shared with you one by one.
I do not take responsibility for the ROM. RESPONSIBILITY IS ENTIRELY YOURS.
Not working
-Face unlock
-Radio
-VoLTE
(You need to make a setting for the camera, notch, LTE Mobile Network and auto-brightness. I told you how to make the settings.)
NOTE: A computer is required to make this ROM setup. It must also be installed in ADB on your computer.
Note: You can install this ROM Google Camera as apk. Unfortunately, there are no features such as Portrait, night mode in the original camera application of the device. However, you can use it if you install it as an apk.
Please download that files:
Download - Pixel Experience ROM GSI file
Download --- Sky Hawk Recovery file
Download - Permissiver V5
Download -Certification Patch for Redmi 8
Download -Treble overlay for Redmi 8
Download --- Lastest Magisk-v20.4
Here -Get the TWRP Official for Redmi 8
Download - vbmeta.img
Note: Please charge your phone at least 60%
First, take the necessary backups as your phone will be completely reset.
1- Unlock your bootloader. For unlocking follow this: http://en.miui.com/unlock/
2- Copy all the files to your SD Card (PixelExperience_ARM64AB-10.0-20200118-2138-GSI.img, SHRP_v2.2.zip, Permissiver_v5.zip, Certification_Patch.zip, Magisk-v20.4.zip, treble-overlay-xiaomi-redmi8.apk)
3-Enable USB debugging. Connect the phone your computer Then copy the twrp.img and vbmeta.img files to the adb folder.
Note: If the name of your twrp file is not twrp.img, please set its name to twrp.img.
4- Go to your computer, open adb folder in cmd, write that:
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
5- Now we will go to the restart phone command. At that moment, you should quickly hold down the volume up key and power button of your phone. Enter this command:
fastboot reboot
Then, hold down the power button with quick boost and turn on twrp.
6- Install Magisk-v20.4.zip in twrp.
Then restart the phone. After the phone reboots, check if Magisk is installed. Once you see it installed, reboot the phone in recovery mode.
7- Install SHRP_v2.2_olive.zip then reboot recovery.
8- Now find the wipe button and tap it. Then press the format data and confirm by typing yes.
9- Then tap wipe again and click on the wipe button at the bottom right.
10- Tap the wipe again and tap on advanced wipe. Select the Dalvik, data, cache, system partitions and reset them.
11- Now return to the main menu screen and tap flash. Select your SD card in the lower right section and tap the PixelExperience_ARM64AB-10.0-20200118-2138-GSI.img file. Then select it as system image and install it.
12- Return to the main menu and come to the flash section and install the file Permissiver_v5.zip.
13- Then go back to the flash section and install the Certification_Patch.zip file.
14- Return to the main menu, tap wipe and complete the wipe from the button on the bottom right.
15- Reboot the system. Your device will either boot in fastboot mode or be bootloop. (If you see it open normally and no problems occur, you can skip step 18.)
16- Go to fastboot mode.
17- Connect the phone to the computer and open the adb folder on cmd. Type:
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
The phone will reboot and turn on. Please set up the phone and turn USB debugging back on.
18- After doing setup and enabling usb debugging, reboot to recovery mode and install magisk.zip. Then reboot the phone.
19- Install build prop editor(https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor&hl=en&pli=1) and root browser(https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree&hl=en) from the Play Store.
20- Open root browser and allow root access then go to your SD card and find treble-overlay-xiaomi-redmi8.apk
21- Copy to treble-overlay-xiaomi-redmi8.apk on Root Directory/system/overlay/ folder.
22- Select treble-overlay-xiaomi-redmi8.apk file on overlay folder and tap the three dots in the top right and tap the properties.
23- Click on the Permissions at the top bar.
24- Select like this photo (link: https://lh3.googleusercontent.com/p...VrSOGT_V9Q2bzgy5IuE9nIfPslILJ1Vz=w429-h904-no ) and click apply then reboot system.
25- Open the build prop editor and allow root access. then tap the 3 dots in the upper right and tap new.
name= persist.camera.HAL3.enabled
value= 1
Set it to and save it. Restart the system.
26- Go to the dialer and dial *#*#4636#*#*. Tap Phone information and set "set preffered network type: LTE only." Then reboot system.
27- Finally, if you want to fix the appearance of the screen notch go to
developer settings >> display cutout and select corner cutout.
That was it. Please note that I am not a developer, so I cannot resolve any errors. I believe that if you apply them like me, you won't have a problem. I will be waiting for your comments. Have a nice day.

I´ll give it a try in my wife´s redmi 8, cus I had tried to flash a bunch of roms in that device and I had not success. Thanks

dngr.fun said:
I´ll give it a try in my wife´s redmi 8, cus I had tried to flash a bunch of roms in that device and I had not success. Thanks
Click to expand...
Click to collapse
You're welcome. If you encounter any problems, please let me know. If you follow what I wrote under normal conditions step by step, you won't have a problem.

Query before flashing
Hello Boss,
on checking the system by "Treble Check" app, it is showing that it is A-type System partition. And the ROM you suggested is AB type. Is there any thing i should worry about before flashing.
I am currently using Lineage OS (unofficial), and following functions doesn't work on it.
Finger print
VOLTE
Radio
face unlock
What about this ROM functionality.

hrwt20 said:
Hello Boss,
on checking the system by "Treble Check" app, it is showing that it is A-type System partition. And the ROM you suggested is AB type. Is there any thing i should worry about before flashing.
I am currently using Lineage OS (unofficial), and following functions doesn't work on it.
Finger print
VOLTE
Radio
face unlock
What about this ROM functionality.
Click to expand...
Click to collapse
At first I tried installing A-only on my device but it didn't work. It worked when I installed A / B. So please try A / B GSI. Because the device you have is probably A / B, not A-Only.
Finger print is working and face unlock is not have in Pixel Experience ROM.
VOLTE and Radio is not working bro.
I will list all the features that work by edit the post today or tommorrow bro

Certification_patch.zip
Whats the use for certification_patch.zip file?
Does it fixes the certification status in google play store?
Also, Can this file be used in any othe gsi too?

coolboyforeva said:
Whats the use for certification_patch.zip file?
Does it fixes the certification status in google play store?
Also, Can this file be used in any othe gsi too?
Click to expand...
Click to collapse
This file exists to integrate the model of the device into rom. I don't know much about google play and you can also install this and permissiver_v5 with other gsi roms. These only for Redmi 8.

hrwt20 said:
Hello Boss,
on checking the system by "Treble Check" app, it is showing that it is A-type System partition. And the ROM you suggested is AB type. Is there any thing i should worry about before flashing.
I am currently using Lineage OS (unofficial), and following functions doesn't work on it.
Finger print
VOLTE
Radio
face unlock
What about this ROM functionality.
Click to expand...
Click to collapse
Before system-as-root was used only on A/B devices but now all devices that ship with Android 9 must use system-as-root. Because of this reason you need to flash A/B roms on A-Only on these devices. As you can see from this page's device list, Redmi 8's image type is A/B so you need to flash an A/B image: https://github.com/phhusson/treble_experimentations/wiki

Does the sensor work? I tried other gsi and custom roms and sensors like accelerometer doesnt work..

Abdul Aziz Shakib said:
Does the sensor work? I tried other gsi and custom roms and sensors like accelerometer doesnt work..
Click to expand...
Click to collapse
All sensors working

i tried it and the sensors didn't work. i needed to flash stock rom and then pixel rom over the stock rom to get it work. seems logical, had no issue so far except the camcorder. when i record a video, lets say i recorded a video for 10 second. but when i play the video, it becomes 1hour video and the sound doesn't sync with the video. video stays frozen the whole time and plays normally at the last few seconds. i tried other gsi and had the same issue. is something wrong? any known solution? are you facing the same problem? if not, then which camera app you are using? thanks in advance because pixel experience is working now after following ur steps

Yes, there is a problem in this regard. Unfortunately, I could not solve this problem. I usually use Instagram cam for video. You can try bro

Abdul Aziz Shakib said:
i tried it and the sensors didn't work. i needed to flash stock rom and then pixel rom over the stock rom to get it work. seems logical, had no issue so far except the camcorder. when i record a video, lets say i recorded a video for 10 second. but when i play the video, it becomes 1hour video and the sound doesn't sync with the video. video stays frozen the whole time and plays normally at the last few seconds. i tried other gsi and had the same issue. is something wrong? any known solution? are you facing the same problem? if not, then which camera app you are using? thanks in advance because pixel experience is working now after following ur steps
Click to expand...
Click to collapse
I use havocOs gsi. It has same problem. Solution:
1. record a video.
2. do not close camera app.
3. open video from the camera app not from gallery.
4. play the video once.
if that plays then you can open that same video from any app.
try that, might work.

kouseralamin said:
I use havocOs gsi. It has same problem. Solution:
1. record a video.
2. do not close camera app.
3. open video from the camera app not from gallery.
4. play the video once.
if that plays then you can open that same video from any app.
try that, might work.
Click to expand...
Click to collapse
it works sometimes but not always.. Currently I am using Havoc OS and it doesn't have a gallery app. So I downloaded "Gallery Go" from playstore and when I try to open the video from the camera app, it opens with gallery go app.
to be noted, i have added some commands in build.prop..
media.camera.ts.monotonic=0
debug.stagefright.ccodec=0
persist.camera.HAL3.enabled=1
i don't know what these do but these commands were mentioned somewhere to enable camera2api..
am i missing something?

kouseralamin said:
I use havocOs gsi. It has same problem. Solution:
1. record a video.
2. do not close camera app.
3. open video from the camera app not from gallery.
4. play the video once.
if that plays then you can open that same video from any app.
try that, might work.
Click to expand...
Click to collapse
try this for video recording , go to phh treble settings, go to Misc, go to camera force timestamp, clock boottime

Redmi 4A abdal said:
try this for video recording , go to phh treble settings, go to Misc, go to camera force timestamp, clock boottime
Click to expand...
Click to collapse
Thanks, I tried it in the havocOs and it is fully ok now.

Hello, is Bluetooth audio working?

Is there an option for internet speed indicator on this rom?

IS TBH
sessionid0 said:
First of all, the download link of all the files required for this "ROM" is taken from the "xda developers forum" posts.
I was constantly experimenting with GSI roms for Redmi 8. I was able to install the Pixel ROM on Redmi 8. I don't think you will have a problem if you follow the steps I shared with you one by one.
I do not take responsibility for the ROM. RESPONSIBILITY IS ENTIRELY YOURS.
Not working
-Face unlock
-Radio
-VoLTE
(You need to make a setting for the camera, notch, LTE Mobile Network and auto-brightness. I told you how to make the settings.)
NOTE: A computer is required to make this ROM setup. It must also be installed in ADB on your computer.
Note: You can install this ROM Google Camera as apk. Unfortunately, there are no features such as Portrait, night mode in the original camera application of the device. However, you can use it if you install it as an apk.
Please download that files:
Download - Pixel Experience ROM GSI file
Download --- Sky Hawk Recovery file
Download - Permissiver V5
Download -Certification Patch for Redmi 8
Download -Treble overlay for Redmi 8
Download --- Lastest Magisk-v20.4
Here -Get the TWRP Official for Redmi 8
Download - vbmeta.img
Note: Please charge your phone at least 60%
First, take the necessary backups as your phone will be completely reset.
1- Unlock your bootloader. For unlocking follow this: http://en.miui.com/unlock/
2- Copy all the files to your SD Card (PixelExperience_ARM64AB-10.0-20200118-2138-GSI.img, SHRP_v2.2.zip, Permissiver_v5.zip, Certification_Patch.zip, Magisk-v20.4.zip, treble-overlay-xiaomi-redmi8.apk)
3-Enable USB debugging. Connect the phone your computer Then copy the twrp.img and vbmeta.img files to the adb folder.
Note: If the name of your twrp file is not twrp.img, please set its name to twrp.img.
4- Go to your computer, open adb folder in cmd, write that:
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
5- Now we will go to the restart phone command. At that moment, you should quickly hold down the volume up key and power button of your phone. Enter this command:
fastboot reboot
Then, hold down the power button with quick boost and turn on twrp.
6- Install Magisk-v20.4.zip in twrp.
Then restart the phone. After the phone reboots, check if Magisk is installed. Once you see it installed, reboot the phone in recovery mode.
7- Install SHRP_v2.2_olive.zip then reboot recovery.
8- Now find the wipe button and tap it. Then press the format data and confirm by typing yes.
9- Then tap wipe again and click on the wipe button at the bottom right.
10- Tap the wipe again and tap on advanced wipe. Select the Dalvik, data, cache, system partitions and reset them.
11- Now return to the main menu screen and tap flash. Select your SD card in the lower right section and tap the PixelExperience_ARM64AB-10.0-20200118-2138-GSI.img file. Then select it as system image and install it.
12- Return to the main menu and come to the flash section and install the file Permissiver_v5.zip.
13- Then go back to the flash section and install the Certification_Patch.zip file.
14- Return to the main menu, tap wipe and complete the wipe from the button on the bottom right.
15- Reboot the system. Your device will either boot in fastboot mode or be bootloop. (If you see it open normally and no problems occur, you can skip step 18.)
16- Go to fastboot mode.
17- Connect the phone to the computer and open the adb folder on cmd. Type:
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
The phone will reboot and turn on. Please set up the phone and turn USB debugging back on.
18- After doing setup and enabling usb debugging, reboot to recovery mode and install magisk.zip. Then reboot the phone.
19- Install build prop editor(https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor&hl=en&pli=1) and root browser(https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree&hl=en) from the Play Store.
20- Open root browser and allow root access then go to your SD card and find treble-overlay-xiaomi-redmi8.apk
21- Copy to treble-overlay-xiaomi-redmi8.apk on Root Directory/system/overlay/ folder.
22- Select treble-overlay-xiaomi-redmi8.apk file on overlay folder and tap the three dots in the top right and tap the properties.
23- Click on the Permissions at the top bar.
24- Select like this photo (link: https://lh3.googleusercontent.com/p...VrSOGT_V9Q2bzgy5IuE9nIfPslILJ1Vz=w429-h904-no ) and click apply then reboot system.
25- Open the build prop editor and allow root access. then tap the 3 dots in the upper right and tap new.
name= persist.camera.HAL3.enabled
value= 1
Set it to and save it. Restart the system.
26- Go to the dialer and dial *#*#4636#*#*. Tap Phone information and set "set preffered network type: LTE only." Then reboot system.
27- Finally, if you want to fix the appearance of the screen notch go to
developer settings >> display cutout and select corner cutout.
That was it. Please note that I am not a developer, so I cannot resolve any errors. I believe that if you apply them like me, you won't have a problem. I will be waiting for your comments. Have a nice day.
Click to expand...
Click to collapse
Is there a way to flash it without SD card???my adb sideloader also doesnt open

I will try it tank you

Redmi 6a Havoc Os 3.4 (Android 10)

I have tested several custom ROM's for Redmi 6a (cactus) but after all I Can say that this ROM is the best one.
Links:
Havoc Os 3.4 download link:
https://drive.google.com/uc?id=1orN9YiOTHgduKp0PgpGUq55KRNCt6UR0&export=download
boot-patch MIUI pie:
https://drive.google.com/file/d/109O1ptY9aapz_SVaysFyQmjmlD3ZPPMT/view
Bugs:
VoLTE
Volume up/down bug during phone calls
Installation:
Bootloader unlock
Install TWRP Pie
Download bootpatch pie 10.4.4 or 11.x
Magisk 19.3
Gapps arm-10-pico
1. Go to your twrp
2. Now click wipe then right bottom side click Format data and type yes
3. Wipe>advanced wipe>
Dalvik/Art Cache
Data
Internal Storage (optional)
Cache
System
Then Swipe to wipe
4. Copy GSI, Magisk, GAPPS in your SD-Card
5. Now click install button and select SD-Card
6. Then right bottom side select intall Image Option
7. Select your GSI
8. Select System Image> then swipe to confirm Flash
9. After Flash complete then go back and
10. Select bootpatch
11. Select boot> Then swipe to confirm Flash
12. Now go back and click install zip Option
13. select magisk 19.3> then swipe to confirm Flash
14. Now go back to home page and click wipe>advanced wipe
15. Select System
16. click Repair or Change File System
17.Click resize File System> swipe to resize
18. Again back to home page then click install Option
19. select SD-Card
20. select GAPPS> swipe to confirm Flash
reboot system

I follow every step you said in video but phone does not boot completely it show a circle rounding some time then reboot ! how many reboot is necessary ?
did you test it ?

@kharuba YouTube video link has been removed from your post. Kindly post the complete steps in your post. Linking to a YouTube video without any more information or detailing steps in the post is against the guidelines. Also, the thread has been moved to the Guides, News, & Discussion sub-forum since it is not a development thread and you're just sharing the ROM.

M_hack! said:
I follow every step you said in video but phone does not boot completely it show a circle rounding some time then reboot ! how many reboot is necessary ?
did you test it ?
Click to expand...
Click to collapse
follow my step-by-step Installation guide, it works 100%. If it doesn't boot flash the official MIUI ROM again and try it from this.

Thanks kharuba, Room very good..

how to enable volte ?? other thinks are work fine thanks for sharing.

KarthikEmperor said:
how to enable volte ?? other thinks are work fine thanks for sharing.
Click to expand...
Click to collapse
You will not find a custom ROM with Volte working. Also FM radio is not working.

What about performance ? How big is score in antutu ?

****ty rom, i can not get passed faceulock setup up on first boot, nor can i set it up or skip the faceunlock setting, it just keep stopping and close immediatialy after the camera shows up..trash

trash999 said:
****ty rom, i can not get passed faceulock setup up on first boot, nor can i set it up or skip the faceunlock setting, it just keep stopping and close immediatialy after the camera shows up..trash
Click to expand...
Click to collapse
Don't try to install face unlock. Then it works. Always deny.

[ROM] [GUIDE] HOW TO INSTALL ANCIENT OS 5.2 GSI ANDROID 11 ON REDMI 8

Hi, here's my guide on how install Ancient OS 5.2 (A11) on Redmi 8
What doesn't work
- Bluetooth
- 4g network and VoLTE (Fix below)
- Brightness slider and auto-brightness (Fix below)
Fixes:
- For brightness: Open settings -> Go in "Phh Treble Settings" -> "Misc Features" -> Scroll until you are in backlight menu -> Select "Force alternative backlight scale" and "Enable auto-brightness overlay" -> then deselect both and reboot
- For 4g and VoLTE: Open settings -> Go in "Network and internet" -> "Mobile network" -> Tap on "Preferred network type" and select "LTE" and then reboot
Note 1: If you find a fix for bluetooth describe it in comments, I will update the guide
Note 2: If you fing other bugs tell me in comments, maybe I could help you (I'm not the developer of the rom)
​IMPORTANT ADVICE:​I am not responsible for any damage caused to your device by not following the steps or negligence at the time of this process, all the steps were carried out and tested on my personal device and are confirmed, my device is Redmi 8 4/64
Installation Steps - All the files you need are HERE​
Note 3: I did the installation coming from Mui 12.0.1 stock (flashed in fastboot with Mi Flash) and there was no problem in the installation process or in the boot process
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%
All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Before continue following steps estract on pc "system-arm64-AB-vndklite.img" from "AncientOS-R-Society-v5.2-ARM64_AB_vndklite-Iron-20210227-vanilla.zip" and activate USB debug in phone settings
4- Reboot in fastboot and connect the phone to the pc with cable
5- Install on pc minimal adb tool (zip at the bottom), flash the TWRP recovery typing " fastboot flash recovery ", now drag twrp file near the command, then vbmeta typing " fastboot --disable-verity --disable-verification flash vbmeta " and drag vbmeta file near the command. Finished the procedure type " fastboot reboot " and hold volume + on the phone until you see the recovery screen
6- Scroll on the slider at the bottom of the phone screen to access in the TWRP
7- Go to Wipe -> Format data -> type "yes"
8- Go to Reboot -> Recovery
9- Go to Wipe -> Avanced wipe -> wipe dalvik, data, cache and system
10- Go to Reboot -> Recovery
NOW YOU HAVE TO TRANSFER ALL OTHER FILES OR IN THE INTERNAL STORAGE OF THE PHONE OR IN SD/USB WITH OTG CABLE
11- Go to Install -> Select the storage where you have files -> Install img -> select "system-arm64-AB-vndklite.img" and flash it (Extracted from the zip)
12- Wait and then go to Reboot -> Recovery
13- Wait and then go to Reboot -> Recovery
14- Wipe -> Advanced wipe -> select "system" and click on "Repair or change file system" -> Resize system
15- Wait and then go to Reboot -> Recovery
16- Install -> Select the storage where you have files -> Flash "GSI-BUGS-FIXER_11_Q.zip"
17- Wait and then go to Reboot -> Recovery
18- Install -> Select the storage where you have files -> Flash "open_gapps-arm64-11.0-nano-20210130-TEST.zip"
19- Wait and then go to Reboot -> System
20-Configure phone and enjoy your new rom
Note 4: Rom is pre-rooted, you only need to install magisk apk, file below
Note 5: I reccomend you the best gcam I've found for Redmi 8, everything works except slow motion, link HERE
Thanks for the attenction​
-Estatè

zas far as i know bluetooth works on vendor from lineageOS 16 from this forum, there are the same bugs on every rom with original vendor.

Why U use my fixes and manuals without request to me? Your manuals wrong and makes bootloop. Before stupid copy-paste read instructions.
All roms booted without any permissiver. Certification patch retarded and not supported Android 11.
GSI FIXER is rom and vendor-specified.
Number in name = Android in rom
Letter in name = Android in vendor

kulaklığımı algılamıyor
edit: Fixed

Vicuel said:
does not detect my headphone
Click to expand...
Click to collapse
Open termux and type....
su
Then give termux root access....
Then type.....
setprop persist.sys.overlay.devinputjack true

mwaseem851 said:
Open termux and type....
su
Then give termux root access....
Then type.....
setprop persist.sys.overlay.devinputjack true
Click to expand...
Click to collapse
This needs to be done after every reboot?

gattud said:
This needs to be done after every reboot?
Click to expand...
Click to collapse
Nono, only paste it in termux with root access and reboot, then you will solve the problem forever

mwaseem851 said:
Termux'u açın ve .... yazın.
su
Sonra termux root erişimi verin ....
Sonra yazın .....
setprop persist.sys.overlay.devinputjack doğru
Click to expand...
Click to collapse
thanks

Don't use any my GSI-BUGS-FIXERS from XDA. This fixes retarded and no more supported!
Don't say to me in Telegram chat about bugs if you use fixes and instructions from any users of XDA except me.

I used the gsi bugs fixer in Telegram

@Estatè Mosconi If you haven't already I suggest you take a look in your PM inbox.

[HOWTO][SM-T590] Samsung Tab A 10.5 (2018) GSI installation + twrp + prevent bootloop + magisk + gapps + safetynet

[HOWTO][SM-T590] Samsung Tab A 10.5 (2018) GSI installation + twrp + prevent bootloop + magisk + gapps + safetynet​
This is my first tuto for the SM-T590 Tab. I´ve tried to install GSI for days. The results was bootloops. So I asked some people, readed some stuff. And voila it´s working. So I would like to share my experience to you.
First of all I would like to say thanks to all the people who helped me to understand some things. But a BIG THANKS goes to @UDPSendToFailed . Thank you for your patience with me .
It should be clear but I would like to write it down here.. I am not a professional and collection my knowledge from other sites and threads. So I am not responsible for data loss, device bricking or other stuff. Thank you.
Prerequisites​- working ADB and fastboot, ubuntu suggested​- odin and odin patched version​- all necessary files: twrp.img; stock FW (latest); GSI Image (a64-binder); Magisk; Disable-DM-Verity.zip​
Enable developer settings and allow OEM unlock​- go to settings, system, about the phone; click several times on build-number​- go back to main, then more settings, developer options​- toggle USB debugging + OEM unlock​
Prepare download mode for odin​- connect the tab to your computer and run the following codes:​
Code:
adb devices
there should be a message to authorize adb to your device​
Code:
adb reboot bootloader
now we should be in download mode​
Flash stock FW​- download latest FW​- open odin (unmodified), choose FW files (AP, BL,CSC)​- click start, be patient, if finished it will reboot to system, close odin​- walk through the setup​
Flash recovery/twrp​- open modded odin​- select "AP" and open the recovery file​- hold volume up and then press start (if you´re not it will boot to system and overwrite recovery)​
Flash GSI​- so now inside twrp..​- follow those steps exactly; very important; otherwise you will end up in a bootloop​- go to "wipe" and select format data, confirm with "yes"​- reboot to recovery again, otherwise twrp wont have access to internal storage​- again to "wipe", then "factory reset"​- go back to "install" section, toggle "install zip" to "install img"​- select your GSI image and choose "install to system"​- when finished go back to "wipe" section​- select "Advance Wipe" then select "System" and then "Repair or Change File System"​- click on "Resize File System" and swipe to confirm​- now go back to "install" section and flash first Disable-DM-Verity and if wanted Magisk24.1 afterwards​- if also needed you can now install gapps​
Pass Safetynet​- boot up system and open magiskmanager​- go to "modules" section and install "hide props config​- download "termux terminal"​- open "termux terminal" and type su; grant root​- type props and choose option "1 - Edit device fingerprint"​- choose "f"​- choose "26 - samsung"​- choose "85 - sm-t590"​- confirm with "y" twice!​
Congrats. Now your GSI should boot up. If you have any questions or suggestions please dont hesitate to let me know.
P.s. please be patient with my English, I am from Germany.

Hey,
i trying to install crdrom 315 on my SM-T590
but every times i get the boootloop
my Firmware => T590XXU3CTF9_T590OJM3CTG1_XSG
Android 10
--> boot stock --> enable usb debbugging and OEM (OEM works only with wifi connection)
--> adb reboot recovery --> wipe data .... reboot Bootloader
--> Install TWRP with patched odin --> directly in TWRP --> format data --> reboot recovery
--> wipe data Factory reset --> install from SD crdrom (crdrom-v315+220220-arm-avZ.img) --> wipe Resize
--> Install disable DM ... (Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip)
--> reboot system = loop
can you help me --> wegen mir auch in Deutsch
Grüße von Deutschland to Germany
AET

Hello there,
to bes sure... what was your exact step for resizing system partition? It was the minor reason for me that the os wont boot up. In my case I´ve only tested AOSP right now.
Maybe your bootloop is caused by the os itself. I am now not at home for about 6 weeks but I´ll give it a try and will let you know ASAP.
You can try AOSP GSI for the meantime.
Grüße auch aus DBT!

my Problem was the wrong ROM i used the arm ROM but for the sm-t590 you need the a64 (binder) ROM OK, its working fine but i head a Problem with my MAC Adress every boot i have another WiFi MAC adress i tested AOSP crdrom and many other but all the same, in the developer Mode the Random MAC is still disabled! how can i fix the MAC adress?
i try it with busybox and ifconfig ..... but i get allways a denied

Hey,
I am sorry to let you know that I am not a developer and so it is not easy for me to understand which part of OS will cause the problems with the mac adress as in your case.
But I think I´ve heard about that problem in the past.
Glad to hear that GSI is working for you right know.
Greetings.

and you have no problems with the wifi? or you have not noticed the changing MAC address?
can you tell me which versions you have flashed
stock Rom Android 10?
and which ASOP version?
--> then I try that times like you

I would really like a custom ROM without ONE UI, but I carry my tablet around in public. Can I set a password on this GSI or will there be a bootloop? And I think that the roms from the T590 will be installed on the T595, since the difference is only in the LTE module? (Well, about the same as on the Nexus 9 LTE / WiFi?)

i have a password set up but i had to deleting keystore.mdfpp.so and keystore.msm8953.so from /vendor/lib/hw after this you can set a password without bootloop!
The only problem I have with it is that my MAC address keeps changing and every now and then the connection drops!