Hi, here's my guide on how install Xiaomi.eu MIUI 12.5 (A10) with all features of MIUI 12.5 on Redmi 8
What work
- All functions of the phone
What doesn't work
- Nothing
Note 1: If you fing bugs tell me in comments, maybe I could help you (I'm not the developer of the rom, look the official thread of the developer -> https://forum.xda-developers.com/t/redmi-8-miui-12-0-2-0-global-by-papp54.4226501/)
IMPORTANT ADVICE:I am not responsible for any damage caused to your device by not following the steps, all the steps were tested on my personal device and are confirmed, my device is Redmi 8 4/64
Installation Steps - Rom link HERE
Note 2: I did the installation coming from Mui 12.0.1 stock (flashed in fastboot with Mi Flash) and there was no problem in the installation process or in the boot process, IF YOU WON'T PROBLEMS START FROM THIS ROM
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%. All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Activate début USB in phone settings, then reboot in fastboot and connect the phone to the pc with cable
4- Install on pc minimal adb tool (zip at the bottom), flash the TWRP (.img file at the bottom) recovery typing " fastboot flash recovery ", now drag twrp file near the command. Finished the procedure type " fastboot reboot " and hold volume + on the phone until you see the recovery screen
5- Scroll on the slider at the bottom of the phone screen to access in the TWRP
6- Go to Wipe -> Format data -> type "yes"
7- Go to Reboot -> Recovery
8- Go to Wipe -> Avanced wipe -> wipe dalvik, data, cache and system
NOW YOU HAVE TO TRANSFER ALL OTHER FILES OR IN THE INTERNAL STORAGE OF THE PHONE OR IN SD/USB WITH OTG CABLE
9- Go to Install -> Select the storage where you have files -> select "xiaomi.eu v12Pro by Papp54.zip" and flash it
10- Wait and then go to Reboot -> System
11- Configure phone and enjoy your new rom
HOW TO ADD AOD MENU IN SETTINGS (IT WORKS FINE):
Flash "AoD_olive_magisk2.zip" in magisk as magisk module, reboot and you will get it.
Note 3: I reccomend you to flash magisk after you have configured the rom to avoid problems
Note 4: I reccomend you the best gcam I've found for Redmi 8, everything works except slow motion, link HERE
- Estatè
It's an honor to see that rom is so good.
hoping you can add more miui12.5 features like new volume slider and new power menu in next update., your rom is really great devs
papp54 said:
It's an honor to see that rom is so good.
Click to expand...
Click to collapse
hi devs . why the link is broken .
link of the rom bro??
papp54 said:
It's an honor to see that rom is so good.
Click to expand...
Click to collapse
i have tried your global version modded rom .i hope thisro has a extra features of yours devs. like new volume slider and new power menu
abendigno1991 said:
link of the rom bro??
Click to expand...
Click to collapse
Link updated, you can download
Estatè Mosconi said:
Link updated, you can download
Click to expand...
Click to collapse
is it stable bro??
Estatè Mosconi said:
Link updated, you can download
Click to expand...
Click to collapse
thanks bro . working great on my phone. it has a great battery back up . nice .hoping for more updates to come.,
abendigno1991 said:
is it stable bro??
Click to expand...
Click to collapse
Yes, but this is latest update for now
abendigno1991 said:
thanks bro . working great on my phone. it has a great battery back up . nice .hoping for more updates to come.,
Click to expand...
Click to collapse
Enter here for updates and recommend magisk modules for this rom
Telegram: Contact @MIUIByPapp54
t.me
thanks devs. im kinda excited whats new on next update hehe
Estatè Mosconi said:
Yes, but this is latest update for now
Click to expand...
Click to collapse
what is the decryption key for the gcam. i can't download it in mega. it needs a decryption key
Decryption key not needed, try to open the on the phone with mega app
thanks for the detailed instructions. just one question what settings to use in franco kernel manager?
rootjunkie404 said:
thanks for the detailed instructions. just one question what settings to use in franco kernel manager?
Click to expand...
Click to collapse
It boost performances, don't use it for long time because it coul be dangerous for the phone.
Anyway, for better performances for example in games or benchmarks these are steps:
Install the apk, grant root permission, go in CPU, big cluster, select "Maximum CPU frequency" and go in GPU, select "Maximum GPU frequency"
Below there are 2 benchmarks, the highest is done with CPU and GPU boost using this rom
there is a new update on his telegram devs. a rounded icon and system optimisation.,can i flash that rom over the rom that i downloaded in this threads??
Estatè Mosconi said:
Decryption key not needed, try to open the on the phone with mega app
Click to expand...
Click to collapse
this is the new update in his telegram .can i flash it without wiping my data ??
abendigno1991 said:
there is a new update on his telegram devs. a rounded icon and system optimisation.,can i flash that rom over the rom that i downloaded in this threads??
Click to expand...
Click to collapse
Yes, download in the phone and after go in settings -> Device -> MIUI Version -> click on the 3 points and after on "Select the packet of update" and select the rom you have downloaded for an OTA update. The phone will reboot in twrp and flash the new rom, after the installation reboot system and you will get the update without losing data and apps.
Estatè Mosconi said:
Yes, download in the phone and after go in settings -> Device -> MIUI Version -> click on the 3 points and after on "Select the packet of update" and select the rom you have downloaded for an OTA update. The phone will reboot in twrp and flash the new rom, after the installation reboot system and you will get the update without losing data and apps.
Click to expand...
Click to collapse
thanks devs. i will download it right now .,great.,you are very responsive .,
Related
The official Android Pie 9.0 update from SAMSUNG is months ahead. Thanks to @phhusson!:angel: We can now get a taste of The Sweetest Release of Android ever!
This is a GSI (Generic System Image) and will most Probably work on all Devices running 8.0 or above (your device must be fully Treblized )
Telegram Channel
Enjoy Android PIE!
Video- https://youtu.be/VfmzkIVSzu0
What Works-
-RIL(Calls,sms,lte)
-Bluetooth, WiFi
-Camera( Stock isn't that great) Use GCam)
-Fingerprint
-and pretty much everything
What Doesn't Work
-Iris Scanner(with high hopes that it'll work in future updates)
-Telephoto Lens( also may work in the Future)
Links and Instructions in the 2nd Post
Links and Instructions
LINKS-
Android Pie 9.0 Phh-GSI https://github.com/phhusson/treble_experimentations/releases/
Gapps
GCam By IDan with Working Dual Aperture!
Google Camera
ADDONS
BRH4 Vendor (flash this first if getting boot loop)
NOTE-U need to be on a Treble Supporter ROM like Stock, any vendor will work)
GSI strands for GENERIC SYSTEM IMAGE
Instructions -
1. Check your device architecture and download the GSI.img accordingly, also download the appropriate gapps for this device
2. Reboot to recovery and Wipe system,cache,dalvik,data(backup previously if you want)
3. Go to install section and find the GSI(choose to install image)
4. Flash the gsi to system partition
5. Now REBOOT to RECOVERY again.
6. Now flash the Gapps.zip normally
7. Reboot to system
8. Enjoy!
[FIXES]
1. If bluetooth doesn't work the try Clean flashing again with latest stock firmware and Vendor
2. If Black screen appears when trying to add Google account then select Chrome in Android Webview Implementation in Developers settings...
Even if that doesn't work then to to twrp(backup data if required) then wipe system the flash GSi,reboot again to recovery and then flash Gapps( micro is recommended) now reboot. Skip the Google setup wizard by not connecting to WiFi or LTE. Now choose sideload Chrome(install via apk) and choose in Webview Implementation)
3. If webview implementation thing isn't working:
Backup data via TWRP. Wipe everything except data, sd card and internal storage.(wipe system partition also) Now flash the GSI again,reboot to recovery, clear cache & dalvik now flash gapps and reboot. Skip the setup by not connecting to internet and then go to dev Settings and choose chrome in webview implementation
4. If gapps give an error: that's most probably because of it detecting 8.1 or 8.0 firmware. So after flashing the GSI, reboot to recovery again then flash Gapps
Addons-
2 .kl Files-
Place the two .kl files in /system/usr/keylayout
Overlays-PR1.zip
Flash for gestures get working
aosp-9.0_Pixel-theme.zip
Flash for Pixel Blue theme instead of Green
Digital Wellbeing App-
Download the Apk from the Addons folder,signup here- Digital Wellbeing Beta ,Install the apk and give it Usage Data Access Permission in App settings
Pixel launcher-
download the launcher apk from addons Folder, replace the quickstep.apk in /system/priv-app/quickstep with this one!
Thanks to @saxmydix for the zips
There is a known incompatibility with CSC PHN
What's the best way to correct the padding for our rounded screen?
For sure i have to root and install the twrp to flash this rom? Will **** the knox counter to flash this rom?
vuoshino said:
For sure i have to root and install the twrp to flash this rom? Will **** the knox counter to flash this rom?
Click to expand...
Click to collapse
Of course, it's a custom ROM
Just another OT sorry. But if I flash something when i will try to restore, the knox counter will be ****ed anyway? Is it right?
vuoshino said:
Just another OT sorry. But if I flash something when i will try to restore, the knox counter will be ****ed anyway? Is it right?
Click to expand...
Click to collapse
Yes, it's permanent
s3xxt0y said:
What's the best way to correct the padding for our rounded screen?
Click to expand...
Click to collapse
You should get correct rounded padding on second boot (you need to wait a minute after first boot)
Quick question, when you mean i have to be on a treble rom before that, does it have to be a Treble rom or a standard lineage would work?#
When I try to add a google account the screen just goes blank!
what's working and not working will be nice to see in the OP and gcam version if u can... this'll Clear all doubts of people
phhusson said:
You should get correct rounded padding on second boot (you need to wait a minute after first boot)
Click to expand...
Click to collapse
Awesome. Thanks mate, thanks for getting the GSI out so quickly too ?
Muntasir Mahmud Saif said:
what's working and not working will be nice to see in the OP and gcam version if u can... this'll Clear all doubts of people
Click to expand...
Click to collapse
I was unable to find anything about what's working and what isn't working?
Lags ... bixby button , home button unlock , google account attachment screen off , access point Not Work but the rom is so fast , so go back to stock
"I was unable to find anything about what's working and what isn't working?"
https://youtu.be/VfmzkIVSzu0
dokibull said:
"I was unable to find anything about what's working and what isn't working?"
https://youtu.be/VfmzkIVSzu0
Click to expand...
Click to collapse
Because it's a generic image
Bluetooth is broken
Which gapps did you guys flash?
OP has been Updated with "What work and what doesn't" and link to GCamera that I use!
MidnightDevil said:
Quick question, when you mean i have to be on a treble rom before that, does it have to be a Treble rom or a standard lineage would work?#
When I try to add a google account the screen just goes blank!
Click to expand...
Click to collapse
Just go to developers settings and in Webview Implementation select Chrome! Hope that helps!?
Code:
/*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
A guide to flash MIUI OTA/Stock/Any MIUI based rom from recovery without any bootloops or bricking device.
First things first, if you haven't done any modifications to your device (not even unlocked bootloader), then this guide is probably not for you. Just update via the Updater app. If you want to unlock bootloader and root read this guide first then come back.
Now if you have unlocked bootloader with TWRP installed and encrypted device then you can flash full ROM from TWRP without any issues.
Staying on an encrypted device is recommend for better security.
To check if your device is encrypted or not go to Phone Settings > Passwords & security > Privacy > Encryption & credentials > check if it shows encrypted or not.
To decrypt your internal storage (Not recommended):
Make sure you have a backup of your data copied in PC.
- In TWRP go to Wipe and select Format Data(don't go to advanced). Type yes and format data. [This process will format all your data so make sure your data is backed up].
- Go back to TWRP home and Reboot > Recovery.
- Reboot > System.
Now if you check again in Phone settings it'll show "Phone not encrypted".
If you have a decrypted device and want to flash MIUI rom or OTA through recovery you'll face bootloop.
Then there are two solutions to overcome this issue:
1. After flashing full MIUI rom through TWRP you need to format data again. But you will have to backup your data to PC everytime as your internal will be formatted. And then you would have to go through the hassle of setting up your phone which takes atleast 15 mins.
2. A better solution is to use another recovery like OrangeFox recovery. It has a special MIUI OTA support. So you can flash MIUI OTA and any MIUI based rom from recovery without bootloop, formatting data or bricking device in any way.
Here's how to use OrangeFox recovery:
Make sure you have a backup of your data copied in PC.
These steps work for both encrypted and non-encrypted devices
- Download the stock MIUI Recovery ROM for your region or any other MIUI based custom rom of your choice, and copy it to your phone’s storage.
- Download the OrangeFox recovery zip from here.
- If you don't have any recovery installed right now then extract the recovery.img file from the zip and follow the "Flashing TWRP" steps from here
- If you already have TWRP then go to Install > flash zip normally. Your device will boot into OrangeFox recovery automatically in 5 seconds.
- Go to the Menu > tap on OrangeFox settings icon in top right corner, and enable these under MIUI OTA settings :
1. Support MIUI incremental OTA
2. Include system in OTA survival
3. Incremental OTA signature verification
4. Prevent auto reboot after installing OTA
5. Disable DM-Verity
6. Disable Forced Encryption (Don't enable this if you have an encrypted device already and want to stay encrypted)
7. Aggressive stock recovery deactivation
- Now go to the “Wipe” menu :
1. If already on a MIUI based rom and flashing your current MIUI rom zip then select data, cache, and dalvik.
2. If coming from a non MIUI based rom to MIUI based one or if switching from current MIUI based rom to completely different MIUI based one then select data, cache, dalvik, system, vendor.
- Now go to "Install" and flash your MIUI ROM. (This is just a one time process.)
- After the ROM is flashed, OrangeFox will start the "OTA_BAK" process, which will backup your system and boot partitions into the /sdcard/Fox/OTA directory. You must NOT delete any of the files in the /sdcard/Fox/OTA directory. If you do, then incremental OTA updates will most definitely fail.
- Reboot > system.
Now when MIUI notifies you that there is an update:
- Download the update, using the MIUI updater app/official website.
- If on an encrypted device allow it to reboot automatically to OrangeFox. If decrypted, boot to recovery manually and under miui OTA settings enable the Disable Forced Encryption option first and then flash OTA from recovery.
- OrangeFox will install the update automatically (this might take several minutes).
- Your phone will reboot automatically upon completion of the installation of the MIUI OTA update (If it doesn't then reboot manually).
- After this, you will not need to flash a full rom any more.
- Enjoy your updated MIUI
Links
1. OrangeFox Recovery
2. Stock MIUI Recovery ROM
If this helped you then hit the Thanks Button. Good Luck.
im using android 10 syberia project and wanted to go back stock rom, will it work the same way?
aidenskcyu said:
im using android 10 syberia project and wanted to go back stock rom, will it work the same way?
Click to expand...
Click to collapse
Yes absolutely just make sure to wipe dalvic,cache,data,system,vendor...rest procedure is same
Hi,
do you think this procedure could work for willow (Redmi Note 8T) too?
I'm mainly concerned about OrangeFox package indicating ginkgo only...
Another question: when you suggest to backup data, you mean that everything (including installed apps and their settings) would be lost?
Thanks
Bye
how to decrypt
the_weird_aquarian said:
Yes absolutely just make sure to wipe dalvic,cache,data,system,vendor...rest procedure is same
Click to expand...
Click to collapse
thanks a lot!
aidenskcyu said:
thanks a lot!
Click to expand...
Click to collapse
Np :good:
imonshahed said:
how to decrypt
Click to expand...
Click to collapse
Mentioned in the post read it carefully
SbAgOoTs said:
Hi,
do you think this procedure could work for willow (Redmi Note 8T) too?
I'm mainly concerned about OrangeFox package indicating ginkgo only...
Another question: when you suggest to backup data, you mean that everything (including installed apps and their settings) would be lost?
Thanks
Bye
Click to expand...
Click to collapse
Well the only reason I didn't mention willow is I'm not sure if orangefox supports willow or not... although I think willow support was added after 10.1 stable version and it's the same file as of ginkgo....
Yes you need to backup your internal storage and every app as you will lose all data/apps/internal storage files.
Hello
Can I flash Global Stable 11.0.4.0 rom via orange fox recovery over India stable rom??
What's the process
Plz reply...
Isafurniture said:
Hello
Can I flash Global Stable 11.0.4.0 rom via orange fox recovery over India stable rom??
What's the process
Plz reply...
Click to expand...
Click to collapse
Yes you can...in wipe select dalvic,cache,data,system, vendor...rest process is same.
the_weird_aquarian said:
Yes you can...in wipe select dalvic,cache,data,system, vendor...rest process is same.
Click to expand...
Click to collapse
Thank you..
Isafurniture said:
Thank you..
Click to expand...
Click to collapse
Np??
1. Can I use this to flash Custom MIUI like eu, pro or custom MIUI step is different?
2. Do I need to follow this stock rom step if I already have a full backup of the ROM?
Dude,, u r guardian of this redmi note 8 forum.. thank you so much for
DailyRoutine said:
1. Can I use this to flash Custom MIUI like eu, pro or custom MIUI step is different?
2. Do I need to follow this stock rom step if I already have a full backup of the ROM?
Click to expand...
Click to collapse
1. Yes just wipe dalvic, cache,data,system,vendor...rest process is same.
2. If you're already on stock rom then whole process is same....if you're coming back to stock rom from custom rom then wipe dalvic, cache,data,system,vendor...rest process is same.
Mozar3lla said:
Dude,, u r guardian of this redmi note 8 forum.. thank you so much for
Click to expand...
Click to collapse
Just helping out others and sharing the knowledge... Thanks though.
Hello, i am on miui 11 eu, (thanks to you, great room honestly), i want to know if i can root with the EU ROM and still update when weekly update is come? or need to unistall the root first and then root?
Thanks
LuisElListo said:
Hello, i am on miui 11 eu, (thanks to you, great room honestly), i want to know if i can root with the EU ROM and still update when weekly update is come? or need to unistall the root first and then root?
Thanks
Click to expand...
Click to collapse
Yes you can root eu.. I'm using rooted eu without any issues....you will still receive updates, no need to uninstall root...but when you install the update you have to flash magisk zip again as after updating you will lose root...so after updating rom, flash magisk and everything will be back to normal.
Is that orangefox method same for encrypted version? I mean my data is encrypted and I'm okay with that but want to flash Orangefox also want MIUI ota/update... Do i need to follow the steps (formatting data/cach etc, flashing recovery miui for create sdcard/fox/ota folder) ?
Superraju said:
Is that orangefox method same for encrypted version? I mean my data is encrypted and I'm okay with that but want to flash Orangefox also want MIUI ota/update... Do i need to follow the steps (formatting data/cach etc, flashing recovery miui for create sdcard/fox/ota folder) ?
Click to expand...
Click to collapse
yes it'll also work in encrypted devices but under miui ota settings don't check disable encryption option so that you can still have an encrypted internal.. Yes you need to flash your current miui recovery rom once you flash orangefox. It's just a one time process for your current rom. Just wipe data,cache,dalvik nothing else.
the_weird_aquarian said:
yes it'll also work in encrypted devices but under miui ota settings don't check disable encryption option so that you can still have an encrypted internal.. Yes you need to flash your current miui recovery rom once you flash orangefox. It's just a one time process for your current rom. Just wipe data,cache,dalvik nothing else.
Click to expand...
Click to collapse
Thanks for your fast reply. The Fox/Ota now taking almost 5gb of internal storage. Can u pls help that...
1. Now if i flash Magisk, do i need to flash Universal DM-Verity and ForceEncrypt disabler zip? or OF will take care of it
2. if i want to flash others custom rom and after that change my mind and restore MIUI back, will ota still work from there? Or i need to repeat the whole process again?
Hi, You & I waiting for realme UI for our Device but we need to wait April 2020. But now we can't wait long time for testing Realme UI so guys I get this ROM from a Telegram Group I am just sharing the Rom and Installation Steps.
RealmeUI for Realme X2 (1991-CN)
Beta 3 (CO-09)
.
Download link: Here
.
Intruction:
1. Flash CO9 rom from twrp.
2. Wipe Data.
3. Flash Magisk (optional)
4. TWRP Advance > Disable force encrypt >swipe (optional)
5. Reboot.
.
Changelog:
3rd party apk installation fixed.
Overall system perfomance improvement
.
Bugs: Fingerprint will not work if you flash magisk or vbmeta.
.
Note: This one maybe the last beta, and it will be published as official realmeui for CN(1991) soon..
Bugs: Fingerprint will not work if you Root.
Do it at your won Risk
In this update will you be able to switch on to another launcher or you'll still be stuck with the default launcher of realme is?
TheSilhouette said:
In this update will you be able to switch on to another launcher or you'll still be stuck with the default launcher of realme is?
Click to expand...
Click to collapse
You can Change The Launcher
I succeeded with installing realmeUI/Android 10 without wiping/losing data. It seems that the Greeting Wizard has problems with the Dark Mode so probably will be easier to pass it while on regular white theme. I did not see most buttons, options, languages, etc. Ended up with Malay language But successfully switched back to the one I need.
There are some sweet enhancements, for example with gestures and double-tap-to-sleep. First impressions are positive.
EDIT. Fingerprint sensors stops working as soon as you disable verify boot by fastboot flash --disable-verification vbmeta vbmeta.img, so it is not directly connected to root access.
The only bug so far besides that is slow GPS fix (much slower than on A.14).
how to back stock rom (A14)?
just flash the lastest official a14.ozip
BaDuc said:
how to back stock rom (A14)?
Click to expand...
Click to collapse
You can flash it later by downloading the .ozip file manually according to your device.
Carnage_mafia said:
You can flash it later by downloading the .ozip file manually according to your device.
Click to expand...
Click to collapse
Yes thanks bro
anyway this can be flashed on the indian variant?
harsh405 said:
anyway this can be flashed on the indian variant?
Click to expand...
Click to collapse
It's better to wait for the beta update of Indian version of Realme UI which would be arriving this month hopefully.
harsh405 said:
anyway this can be flashed on the indian variant?
Click to expand...
Click to collapse
no. its for chinese variant.
Can I flash rom realme UI with stock recover
Kelvin3310 said:
Can I flash rom realme UI with stock recover
Click to expand...
Click to collapse
no you can't
razu031 said:
no you can't
Click to expand...
Click to collapse
So sad thank you
Kelvin3310 said:
So sad thank you
Click to expand...
Click to collapse
why do you need stock recovery? TWRP recovery is good enough.
razu031 said:
why do you need stock recovery? TWRP recovery is good enough.
Click to expand...
Click to collapse
Because I dont have computer for up TWRP or root
Hi folks,
this is not difficult to modify this beta ROM having FP working. There is no system partition check so it is safe to flash TWRP, immediately boot into it, mount it in RW mode and make any modifications needed. For example, after performing these mentioned steps make from your Linux machine
Code:
for i in FindMyPhone KeKeMarket KeKeThemeStore HeyTapSpeechAssist HeyTapSpeechService GlobalSearch CloudService Browser HeyTapUserCenter; do adb shell rm -rf /system/priv-app/$i; done
for i in SystemAppUpdateService GameSpace SoterService RomUpdate OppoCriticalLogService OppoLogKit_Beta ChildrenSpace BaiduInput Feedback KeKePay Shelper; do adb shell rm -rf /system/app/$i; done
Note. Of course, you need flash back stock boot and vbmeta to have you FP working again.
It also means we can root this ROM with old, system-way, using SuperSu and alike.
Just the day I flash GSI...
How is it compared to GSI?
Should I flash it directly over a14 or wipe sytem data vendor etc???
osamanazim said:
Should I flash it directly over a14 or wipe sytem data vendor etc???
Click to expand...
Click to collapse
You need a full factory Reset for effective flash or you can just flash directly on .A14 rom.
Changelog
System
• Brand new UI design brings light and fluid experience
• Updated to Android 10
Instructions
• Download the appropriate package - OnePlus 5
• Open the File Manager and move the downloaded .zip package from the Downloads folder to the root directory.
• Open Settings - System - System updates, press the cogwheel on the top right corner, choose the Local upgrade option, and select the rollback file.
Users who are still on OBT builds for 5/5T can update to this build only via update from recovery. For those, PLEASE NOTE, your entire data will be wiped.
• Turn off the device -> Press power and volume up key simultaneously until the device enters the Fastboot Mode
• Navigate to Recovery option using volume and power button -> Choose English -> Install from Internal storage -> Select the downloaded zip file -> Select 'Yes'
• Wait until the installation is complete -> Reboot
Note:
• Please keep in mind that this is beta software. These builds are not as stable as our official OTAs. By installing this update, you accept the potential risks.
https://forums.oneplus.com/threads/android-10-open-beta-1-for-oneplus-5-5t.1218721/
OnePlus 5 : https://oxygenos.oneplus.net/OnePlus5Oxygen_23_OTA_063_all_2004201835_a1de28fd0bda4c8b.zip
OnePlus 5T : https://oxygenos.oneplus.net/OnePlus5TOxygen_43_OTA_063_all_2004201837_eca63aa919a1477a.zip
Anyone dirty flashed the full zip through twrp and after that installed magisk for root? Does that work?
Im on latest stable.
PhoenixNLx said:
Anyone dirty flashed the full zip through twrp and after that installed magisk for root? Does that work?
Im on latest stable.
Click to expand...
Click to collapse
I don't think so... It's better to perform a clean install
Astur_Torque said:
I don't think so... It's better to perform a clean install
Click to expand...
Click to collapse
Offcourse its better. But just want to know if it works... If i dont have to install all of my apps again. I'll take a chance. So if anybody tried it allready.
Or clean install full zip and magisk after that maybe?
PhoenixNLx said:
Offcourse its better. But just want to know if it works... If i dont have to install all of my apps again. I'll take a chance. So if anybody tried it allready.
Or clean install full zip and magisk after that maybe?
Click to expand...
Click to collapse
I came here looking for this too. I guess I'll have to do a full backup just in case before updating.
Hi, I come from OOS Stable 9.0.11 root, I just uninstalled MAGISK via TWRP then I restarted and I went through settings then system and I did update locally and everything is fine past. I reflashed TWRP via Fastboot then root with Magisk the last via TWRP and it's all good !!!
Ssmiles said:
Hi, I come from OOS Stable 9.0.11 root, I just uninstalled MAGISK via TWRP then I restarted and I went through settings then system and I did update locally and everything is fine past. I reflashed TWRP via Fastboot then root with Magisk the last via TWRP and it's all good !!!
Click to expand...
Click to collapse
Did you dirty flash or?
yes dirty flash
kernel BluSpark OOS v193 error in TWRP
Recovery TWRP 3.3.1-x blu_spark v9.110
ctsProfil Magisk 20.4 false
Astur_Torque said:
I don't think so... It's better to perform a clean install
Click to expand...
Click to collapse
Yes it worked, for me except duo calls not working when google hotword is enabled, everything is working
duo it's desactived
I tried this method https://droidholic.com/fix-cts-profile-mismatch-errors/ but CHROME doesn't work afterwards so I uninstalled everything
I just dirty flashed it in bluspark.
Full zip install
Magisk 20.4
Clear cache
Done
@PierreVicquery02 Request you to please remove the "[OFFICIAL]" from the thread title. The official thread already exists (it is stickied). Thanks for understanding!
shadowstep said:
@PierreVicquery02 Request you to please remove the "[OFFICIAL]" from the thread title. The official thread already exists (it is stickied). Thanks for understanding!
Click to expand...
Click to collapse
My thread was published before the other one, but as you wish
PierreVicquery02 said:
My thread was published before the other one, but as you wish
Click to expand...
Click to collapse
The other one (official thread) was created on 25th November 2017 by Funk Wizard, when the first Open Beta was released. Ever since then, it has been used for announcing all subsequent Open Beta releases as well as gather feedback on them. Nonetheless, thanks for changing the thread title, I appreciate it!
Does any one have any idea how I can enable full screen gestures for OnePlus 5?
I flashed the open beta build and tries enabling on screen navigation buttons but it's giving me the old buttons
I tried using
adb shell settings put secure swipe_up_to_switch_apps_enabled 1
as it used to work on OOS 9, but this has no effect on the current open beta build
Thanks in advance
The wifi is randomly dropping for me then reconnecting. That happens quite often,anyone else experiencing it? I'm full stock with locked bootloader,haven't done a factory reset though.
this beta ROM can pass safety net with magisk?
fedex_742 said:
this beta ROM can pass safety net with magisk?
Click to expand...
Click to collapse
Somebody passes, somebody not. I don't know why.
Tuki Rom v1.3
Ported from Galaxy A51
Important notes:
Do not blame me if your sdcard dies or getting bootloop when you have data and for getting fired because alarm clock has been failed
Features:
Highly debloated for perfomance
Deleted samsung services
Feels like AOSP
Pseudo stereo sound
60Fps front camera
Build.prop Tweaks
Floating feature tweaks
Very smooth and fast
Csc tweaks
Taskbar from Fold devices
Bugs:
Pro mode
Nfc
Found any, tell me
Telegram channel
Download For Galaxy M21 (Mega)
Download For Galaxy M21 (TeraBox)
Please note that i'm using Prism and Optics from m31 and If you got bootloop on M21 please send logs
Kernel source
Credits:
Flylarb For helping and for T vendor
Royna For kernel
Screenshots:D
Change log:
Spoiler: V1.0
Initial build of TukiRom
Spoiler: V1.1
Added taskbar
Even more debloated
Added more Floating feature tweaks
Added Csc tweaks
Even more smooth
Fixed mic
Spoiler: V1.2
Custom Wallpaper-res
Fixed More connection settings bug
Added some build.prop tweaks
Initial build for M21
Spoiler: V1.3
Added Image clipper
Added Live blur
Updated walpaper-res
Fixed Data usage bug
Improved perfomance
Improved Battery life
Added China Smart Manager
Added advanced settings menu
Added some build.prop tweaks
Added selectible tweaks in installer
Reserved
Thanks for making this dev. The community was waiting One Ui 5 and you made that happen. Give some details about kernel in the change log.
Fun fact when I 1st open the rom and saw the task bar I thought it got glitch then I turn the task bar off and then full AOSP rom with one ui , great .
Ultra fast.
Taskbar enabled by default, cannot hide navbar so they are multiplying buttons.
NFC not working.
How can I hide root for banking apps etc?
kwasior500 said:
How can I hide root for banking
Click to expand...
Click to collapse
Flash this file i attached below on magisk and wipe data for gms and playstore
i thick we should try magisk 26.1 in it. There are many fixes available like safety net fix , magisk hide , lsposed module like girgit and more.
I am currently on LPOS reborn for m21
Can i dirty flash it???
BobaBoi69 said:
I am currently on LPOS reborn for m21
Can i dirty flash it???
Click to expand...
Click to collapse
You only can do clean flash
Pachadomenic said:
You only can do clean flash
Click to expand...
Click to collapse
Soo do i have to flash the stock rom and reflash this one??
Wait is there any one ui 5.1 core for samsung m21??
BobaBoi69 said:
Soo do i have to flash the stock rom and reflash this one??
Wait is there any one ui 5.1 core for samsung m21??
Click to expand...
Click to collapse
Device used M21 2020 binary 3
Things you need to download before going for the process of installation twrp v3.7.0 , tukirom zip 1.2 , stock device firmware, odin v3.14.4
I have put the tukirom zip in my SD card for flashing from twrp.
Installation Process
Step 1 Unlock the Bootloader or oem unlock from developer option in settings. (Search for Bootloader unlocking in m21 you will find the solution on internet)
Step 2 Boot into Download mode (Search for download mode in m21 you will find the solution on internet)
Step 3 open ODIN software in administration mode on the pc or laptop.
Step 4 flash the stock firmware. ( it is easy , but if need help say it , I will add it )
Step 5 after flashing the stock firmware the device will reboot and boot into system. Fill up all the details as per your requirements. And after the 1st you have to unlock again the developer option. (You know how to do that right ! )
Step 6 view in developer option if the oem unlocking option is visible or not . If not then exit from setting the connect your device with a wifi and then see if it is visible now or not. If not then restart the phone and connect to wifi 1st and then go to setting as see if oem unlocking is visible.
Step 7 after you are sure oem unlocking , boot into Download mode . And use the odin software to flash the twrp.
Step 8 Connect the device which is in download mode to the pc if not connected.
" Added " log will show .
Click on options on the side of log icon and unclick reboot.
Step 9 Click on AP and and select the twrp v3.7.0 zip file . (M215FXXU3CWB1 twrp , I had used this varient for my device.)
Step 10 Click on start and within a shot amount of time twrp will be flashed into your device. After the successful flash press volume down and power button for 8 sec and then direct press volume up and power button until twrp page shows up.
Step 11 Flash the rom from SD card
Step 12 Wipe/Format data
Step 13 Reboot
Please note that first boot will be long and
And compele setup without Wifi.
I have done the complete setup with wifi.
Task bar is automatically on on the 1st boot so you have to manually turn off it.
BobaBoi69 said:
Soo do i have to flash the stock rom and reflash this one??
Wait is there any one ui 5.1 core for samsung m21??
Click to expand...
Click to collapse
I was flashing directly from crdroid9
kwasior500 said:
I was flashing directly from crdroid9
Click to expand...
Click to collapse
Did that work fine !?
I'd mentioned it if...
Pachadomenic said:
Tuki Rom v1.2
Ported from Galaxy A51
Important notes:
Do not blame me if your sdcard dies or getting bootloop when you have data and for getting fired because alarm clock has been failed
Features:
Highly debloated for perfomance
Deleted samsung services
Feels like AOSP
Pseudo stereo sound
60Fps front camera
Build.prop Tweaks
Floating feature tweaks
Very smooth and fast
Csc tweaks
Taskbar from Fold devices
Bugs:
Pro mode
Nfc
Found any, tell me
Telegram channel
Download For Galaxy M21
Please note that i'm using Prism and Optics from m31 and If you got bootloop on M21 please send logs
Kernel source
Credits:
Flylarb For helping and for T vendor
Royna For kernel
Screenshots:
Click to expand...
Click to collapse
Can it be install binary 2 device!?
Ajaythepower1606 said:
Can it be install binary 2 device!?
Click to expand...
Click to collapse
try
Ajaythepower1606 said:
Device used M21 2020 binary 3
Things you need to download before going for the process of installation twrp v3.7.0 , tukirom zip 1.2 , stock device firmware, odin v3.14.4
I have put the tukirom zip in my SD card for flashing from twrp.
Installation Process
Step 1 Unlock the Bootloader or oem unlock from developer option in settings. (Search for Bootloader unlocking in m21 you will find the solution on internet)
Step 2 Boot into Download mode (Search for download mode in m21 you will find the solution on internet)
Step 3 open ODIN software in administration mode on the pc or laptop.
Step 4 flash the stock firmware. ( it is easy , but if need help say it , I will add it )
Step 5 after flashing the stock firmware the device will reboot and boot into system. Fill up all the details as per your requirements. And after the 1st you have to unlock again the developer option. (You know how to do that right ! )
Step 6 view in developer option if the oem unlocking option is visible or not . If not then exit from setting the connect your device with a wifi and then see if it is visible now or not. If not then restart the phone and connect to wifi 1st and then go to setting as see if oem unlocking is visible.
Step 7 after you are sure oem unlocking , boot into Download mode . And use the odin software to flash the twrp.
Step 8 Connect the device which is in download mode to the pc if not connected.
" Added " log will show .
Click on options on the side of log icon and unclick reboot.
Step 9 Click on AP and and select the twrp v3.7.0 zip file . (M215FXXU3CWB1 twrp , I had used this varient for my device.)
Step 10 Click on start and within a shot amount of time twrp will be flashed into your device. After the successful flash press volume down and power button for 8 sec and then direct press volume up and power button until twrp page shows up.
Step 11 Flash the rom from SD card
Step 12 Wipe/Format data
Step 13 Reboot
Please note that first boot will be long and
And compele setup without Wifi.
I have done the complete setup with wifi.
Task bar is automatically on on the 1st boot so you have to manually turn off it.
Click to expand...
Click to collapse
i know all this in root detail bruh
all i asked was do i need to flash stock rom or a custom rom update dirty flash will do it