I got an error installing the rom to Xperia 10.
It's stopped at the red light.
So I tried Xperia Companion and newflasher, but it was not recognized.
However, since this device uses emmc, I thought I could use debrick.img.
So I'm looking for someone to help me once.
Related
is there anyone who can help me to put a new ROM in sony xperia z
it go wrong for me every time I try it go dead every time I try
to update again via the Sony PC Companion 2.1
What can you recommend rum
bhaldborg said:
is there anyone who can help me to put a new ROM in sony xperia z
it go wrong for me every time I try it go dead every time I try
to update again via the Sony PC Companion 2.1
What can you recommend rum
Click to expand...
Click to collapse
I'd recommend you to use the Flashtool and flash the original base ROM via .ftf file.
Read the sticky guides in the Troubleshooting and Development areas. If you try to flash a rom and it goes wrong I would reccomend using flashtool to just go back to stock and start over, flashing them on top of each other can create issues and make it hard to pinpoint where you went wrong.
Are you locked or unlocked bootloader? If locked you can only run roms designated as such.
Are you on the same firmware that the rom you want was based on? If not, get the.ftf file for that, flash it in flashtool, thenn root..recovery..then try your rom, a lot of them dont like it if you are cominy from a different firmware.
Get real comfortable using flashtool before moving on to the custom rom, so that you know its set up right, and that you can change fw, flash radios, etc smoothly. Finally.delete the sony companion from your pc, and only install it if you run into an issue you cant solve by reverting to stock with flashtool.
i send my unlocked and water damaged Xperia Z to the service center here in Germany.
The Water indicators are all white and my phone was dead !
After 8 Days i get a brandnew Xperia Z included Charger, Smarttags Black Dockingstation and Datacable !
I got my phone a week ago used. I had previous xperiance (no pun intended :crying: ) with a xperia ray and had it running all types of roms. Wanting to have the same experience i tried to flash cm11 for locked bootloader and it all went wrong. I didnt even flash it. I was formating the cache and cmw touch froze. I waited 5 min and nothing happened. So i did the off thing in the back and now it gets stuck on sony logo. If conected to the computer nothing happens but green led then red and stops at sony logo. I tried flashtool but it says no drivers and i cant find them. I used sus and it cant detect phone. Pc starts to install something when plugging in but then stops. I have c5306. Can someone walk me through this?:crying: I had 4.3 so i dont think sus would work. Even if i cant fix does anyone know where i can have it repaired in victoria bc for cheap? I bought it mint for 125 from friend and dont want to spend over 50. Maybe even 25.
Thanks,
Ethan
I said it before, there's no such thing as a fully bricked Xperia SP unless you're having hardware issues.
Try installing the following drivers: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
Then run flashtool again in order to flash your ftf file.
Thanks for your reply but I already fixed it. I earlier tried sus to fix but it wouldn't get recognized so I thought that pcc wouldn't either. But last night I was in a very passed off mood that I tried it and.it worked! Now I'm on stock 4.3 rooted with towelroot. I don't think I'm gonna go for custom rim until I have unlocked bootloader. I will take a look at drivers though. Thanks
I'm sure this is been written about several times, but I just bought a new Z3 compact and have attempted to update the firmware through the Sony PC companion app. When it is prepared and it tries to turn off your phone and install the S1 drivers, it is unable to do so. I have manually downloaded the Z3 compact drivers and pointed device manager to them but they will still not install. Google search hasn't helped anything although I've seen references to fast boot drivers. Is this what I want? I assumed I needed the USB drivers and I've only grabbed the ones from Sony directly. I'm not interested in modding the phone at this point, just installing the stock updates.
For what it's worth Sony PC companion can recognize my phone when I attach the USB when the phone is powered on it's the update process where it stalls out.
Thank you in advance for any thoughts.
Hello,
I purchased Xperia Z box packed from Dubai, My friend brought this for me and i opened sealed and switch on.
After some minutes it just got hang and i had to hard reboot. Then after hard reboot it was keep restarting.
I read many forums and solutions, I first updated it hardly from PC Companion, it was ok but when i went to change sim card again it started rebooting, then i used flashtool to flash rom but same issue after some hours rebooting stare...
Went through PC Companion support zone and repair but after installation after setup done main screen come rebooting start..
I have no idea what is the main issue? cell phone is unlocked
Please help
Hi,
i have a sony xperia sp, i am trying to install a custom ROM onto the phone, but im having issues when trying to unlock the bootloader, i am aware that i need the bootloader unlocked to install/flash the ROM and Gapps but the flashboot only lasts for about 5 seconds, before it starts charging, im on windows 10 and i have been using my 2.0 usb port, but nothing is working, i am desperate to install a custom rom as 4.3 is horrible, can someone please help?
Kind Regards