Database Develop

Recovery Mode after Encryption

Hello
after i rooted my z3 compact and stuff i thought "hey, encrypting the data would be nice and safe" and did so.
after this i wanted to install some zip via recovery-mode and there are just errors telling me "cannot mount sdcard" and smth like that
i assume this is because the sdcard is encrypted.. .
did anyone know how i can use recoverymode again without flashing the whole firmware back again? oO
thank you

I have the same situation. Can't even enter recovery. You can copy paste files from the zip in the system with for example root explorer, set the correct permissions and reboot.
A working recovery would be better.

I'm on 6.0.1, rooted, locked bootloader and encrypted phone. Can't seem to enter recovery either. There's no green LED on phone reboot. Tried Power + vol up/down, no luck. Also volume up/down during boot, also nothing.
Is there no way to access recovery now?

sil_el_mot said:
did anyone know how i can use recoverymode again without flashing the whole firmware back again? oO
Click to expand...
Click to collapse
There is a TWRP 3.0.2.0 for Z3c available here
Apparently it does work with encrypted partitions, but you will probably have to encrypt the phone after installing TWRP, so this won't help you out of your situation.
Edit: there is a manual install of TWRP compatible with MM, once in recovery you could flash the 3.0.2.0 version and restart to recovery, but I haven't tried this and you may well end up in a bootloop with an unreadbale encrypted partition.

sil_el_mot said:
after i rooted my z3 compact and stuff i thought "hey, encrypting the data would be nice and safe" and did so.
after this i wanted to install some zip via recovery-mode and there are just errors telling me "cannot mount sdcard" and smth like that
i assume this is because the sdcard is encrypted.. .
did anyone know how i can use recoverymode again without flashing the whole firmware back again?
Click to expand...
Click to collapse
for those of you who have a working recovery and encrypted data partition and SDcard, there are two ways of using it:
1. VIA ADB SIDELOAD: TWRP have a ADB sideload feature. it means you can flash .zips directly from your computer, connected to your phone wia USB cable. steps: 1. go to TWRP, search for ADB sideload feature and turn it ON, 2. connect your phone to your computer, 3. open terminal on your computer and type:
Code:
ADB sideload "path/to/your/file.zip"
. bingo!
2. VIA USB OTG: Z3c support USB OTG (On The Go) so you can connect your USB key to your phone via USB OTG cable. you put .zips you want to flash to your USB, connect it to your phone when in TWRP and flash them from USB instead of encrypted partitions.

devices can't start, debug usb not turn on

after installed super su I reboot my devices but it block. with adb on my computer i have ? anauthorized and i have not a custom recovery, i am on lenovo k3 note. i want to install a cmw recovery but adb don't work and on my recovery i just have install uppdate.zip from sdcard 2. i think the sdcard2 insn't the my external memory card. and i have the official rom on my computer. how can i get authorized .? or how can i flash it ? i tried sp flash but without debug usb turn on there is nothing, the download don't start.
need help please.

Error accessing the Internal storage on Zuk Z2 Pro

I have been getting this error when I try to access the Internal storage on my Zuk Z2Pro,
Error " You do not have permission to access this device "
I have tried the following steps
1. Reinstall to factory version using the QFIL method
2. Tried to unlockboot loader ( It was unlocked in the first place but reattempted ) in the fastboot mode, it does say bootloader unlocked, but the secure boot is enabled ( not sure if secure boot should be enabled )
3. Reinstalled the drivers for fastboot and adb.
4. I am able to FTP to the internal storage using Wifi, but not through the USB cable in windows explorer. Even tried creating a new account to check if it was a windows profile issue.
5. Reflashed the 2.3.044 ( for some reason Zuk pushed the update )
Any help on the same ?

Did it work before?
Normally after pluging in your phone to pc you have to drag the notification bar and allow mtp access on your phone.
Afterwards you can see the storage on your phone.

fastboot chrash after 10-20 seconds, PC does not recognize,TWRP is ok

Hi,
I ask for help
After attempting to install xpose on the miuI 10 mi5 and restart, the initial logo was rotating and could not go any further.
After various crashes and tortures, I blew him all with a wipe from TRWP.
Now the situation is as follows:
- Mi PC sUIT does not see it (ask for connect your device via USB)
- PC does not see mi5, in Android Divace - Android ADB Interface (yellow triangle)yesterday everything worked, I did not touch anything on the PC.
I think that xiaomi_usb_driver are ok
- vol+,power = can run TWRP 3.2.3.0, so I wipe it all
- Vol-,power = fastboot mode chrash after 10-20 seconds and switch to the logo where it remains in the loop
- mi5 do not react on commands from PC side:fastboot devices,adb devices, fastboot flash recovery twrp.img, fastboot boot twrp.img, adb sideload miui10, etc
It was root with help TRWP,lazyflasherand MagiskManager
is there any idea how to install again miui 10?
thanks in advance

that is thit
In TWRP: Mount, Enable MTP (data, chache) conect with PC and copy/paste ROM

Unable to sideload image with ADB

Hi, On Windows 10 & Linux, I attempted to install Lineage os by following the official tutorial: https://wiki.lineageos.org/devices/gts28vewifi/install
on a SM=T710.
I managed to install twrp-3.5.0_9-0-gts28wifi.img using Heimdall with no issues in download mode.
I hit a brick wall when attempting to install the Lineage OS image in Recovery mode with TWRP, adb sideload doesn't work and doesn't detect the tablet.
I tried multiple drivers, tried with Odin (does not detect either), tried with a memory card inserted (via the micro usb port, no success), I'm unable to use USB OTG it is disabled.
With no OS or rom installed, I'm stuck and desperately need to flash an image file and not sure how, any help is greatly appreciated!