Related
Preamble
As the title suggests, I had a Nexus 5 running stock Android 5.0, with root and TWRP, and wanted to update to Android 5.0.1 (without losing all my data, of course). I couldn't find any guides for my particular circumstances, so after working out how to do it myself, I thought I'd share my method.
Note: This guide is not for the uninitiated. Be prepared to Google something for yourself if you don't understand it.
Prerequisites
Before starting this guide, you should have:
A Nexus 5 that running stock Android. The presence of root/Xposed/custom recovery (maybe custom kernels?) shouldn't be relevant, but I can't vouch for the efficacy of this guide if you've done something obscure to your install.
Android SDK tools, specifically the ADB and fastboot binaries. Additional USB drivers may be required on Windows.
The factory image for the Android version you are currently running.
1. Uninstall root and other /system modifications
If you have rooted your Android, and/or installed BusyBox, Xposed or other modifications to /system, you will need to uninstall these modifications. Failing to do so will cause the OTA to complain that there's something funky going on in your /system partition.
You may be able to manually uninstall each of these modifications, but this was not enough for my install – doing a ‘Full unroot’ in SuperSU still left behind files in /system. The easiest way to uninstall all /system modifications is to reflash the /system partition.
Extract the Nexus 5 factory image (e.g. hammerhead-lrx21o-factory-01315e08.tgz), yielding a directory with files such as flash-all.bat and image-hammerhead-XXXXXX.zip. Do not use the flash-all script, as this will unnecessarily wipe all data on the device.
Extract the image-hammerhead-XXXXXX.zip file, specifically the system.img file.
Open a command prompt/terminal window.
Connect the phone to the computer with a USB cable.
Boot the phone into the bootloader.
Method 1: Power down the phone, then hold VolUp + VolDn + Power until the phone boots into the bootloader.
Method 2: From the terminal, run adb reboot bootloader while the phone is still powered on.
From the terminal, run fastboot flash system /path/to/system.img.
2. Uninstall any custom recovery
Custom recoveries don't seem to support OTA updates, making it necessary to uninstall the custom recovery by reflashing the stock recovery.
Extract the recovery.img file from the factory image, as in Part 1.
Open a command prompt/terminal window, connect the phone to the computer, and boot into the bootloader, as in Part 1.
From the terminal, run fastboot flash recovery /path/to/recovery.img.
Optional: Reflash boot.img and/or cache.img
Some users have reported that reflashing system.img was not sufficient, and that reflashing boot.img and/or cache.img was also necessary. I did not have this problem, but if you do:
Extract the boot.img and/or cache.img files from the factory image, as in Part 1.
Open a command prompt/terminal window, connect the phone to the computer, and boot into the bootloader, as in Part 1.
From the terminal, run fastboot flash boot /path/to/boot.img.
From the terminal, run fastboot flash cache /path/to/cache.img.
3. Apply the OTA update
The simple part. In the bootloader, use the VolUp/VolDn buttons to select ‘Start’, then press the Power button, to reboot into Android. Follow the system update instructions to install the OTA update.
4. Reflash the custom recovery and re-root
Also self-explanatory.
Hey,
I just wanted to say thanks. This totally fixed the problem I was having. I also want to add that after I flashed the system.img, I was getting errors related to "EMMC:/dev/block/platform/msm_sdcc.1/by-name/boot" with a bunch of numbers after. I googled it and found I had to also flash boot.img, and after that, the OTA worked fine. I would assume if anyone else gets errors like this, they should flash whatever img it shows in the error (ie: mine said /by-name/boot so I flashed boot.img).
-BGM
It worked for me
I've always been using a toolkit for my rooting purposes, I have done Full Unroot on SuperSU, but still getting an error when trying to update to 5.0.1
Will flashing stock wipe everything(whatsapp image, camera's,messages, etc etc)on my phone?
azlan96 said:
I've always been using a toolkit for my rooting purposes, I have done Full Unroot on SuperSU, but still getting an error when trying to update to 5.0.1
Will flashing stock wipe everything(whatsapp image, camera's,messages, etc etc)on my phone?
Click to expand...
Click to collapse
I also had problems using ‘Full Unroot’ in SuperSU. It's not actually as ‘full’ as it sounds.
Flashing a full factory image would normally wipe everything, but carefully following this guide will only reset the /system partition, not any user data.
I'd like to say thank you very much! I was looking for this kind of tutorial... I encountered an error while following all the steps because I forgot I had a custom kernel. So I wanted to add that if you have a custom kernel remember to do the same steps as described above for the kernel (return to stock) and then follow the system and recovery steps afterwards.
If you don't like running commands in terminal you can use Nexus Root Toolkit, on advanced, you have all the commands you need available.
Thank you very much RunasSudo
Taiyo85 said:
I'd like to say thank you very much! I was looking for this kind of tutorial... I encountered an error while following all the steps because I forgot I had a custom kernel. So I wanted to add that if you have a custom kernel remember to do the same steps as described above for the kernel (return to stock) and then follow the system and recovery steps afterwards.
If you don't like running commands in terminal you can use Nexus Root Toolkit, on advanced, you have all the commands you need available.
Thank you very much RunasSudo
Click to expand...
Click to collapse
I have my ADB and Fastboot ok as confirmed by nexus root toolkit, but I am not sure on how to use terminal.. I launched command prompt but it doest recognise all the commands..
Tried Flash Stock + Unroot on Nexus Root Toolkit but the software will crash (fastboot.exe has stopped responding)
I am really clueless on what to do next..
azlan96 said:
I have my ADB and Fastboot ok as confirmed by nexus root toolkit, but I am not sure on how to use terminal.. I launched command prompt but it doest recognise all the commands..
Tried Flash Stock + Unroot on Nexus Root Toolkit but the software will crash (fastboot.exe has stopped responding)
I am really clueless on what to do next..
Click to expand...
Click to collapse
Flash Stock + Unroot wipes everything and defeats the purpose of the tutorial made by RunasSudo
First and foremost you should download Android SDK (Tools only) on http://developer.android.com/sdk/index.html and then ask to install the extra: Google USB Driver.
With Nexus Root Toolkit you don't need terminal, click on advanced and you should see options to flash through fastboot the system only, recovery and kernel. It is pretty straighforward and it asks where the .img are in your computer
Thanks! This guide worked.
For Ubuntu users, you need to install adb and fastboot with these commands :
sudo add-apt-repository ppahablet-team/tools && sudo apt-get update (optional)
sudo apt-get install android-tools-adb android-tools-fastboot
Thanks for the great step by step.
As with some of the other posters, re-flashing system.img was not enough for me, I had to also re-flash the boot.img. Once that was done, I had no problems side loading the update and am now running LRX22C.
I only seem to fiddle with adb once a year - when it OTA time comes - and can never seem to remember some of the steps that need to be taken. Reading through some of the other threads, I have a feeling a lot of people who rooted/custom recovery and cant do the OTA are going to be doing complete image re-flashes when this guide makes that completely unecessary.
thanks again,
.d
BananasGoMoo said:
I googled it and found I had to also flash boot.img, and after that, the OTA worked fine.
Click to expand...
Click to collapse
datcon said:
As with some of the other posters, re-flashing system.img was not enough for me, I had to also re-flash the boot.img.
Click to expand...
Click to collapse
Thanks for the feedback! I've added a note about boot.img to the OP.
+1 for flashing boot.img worked perfect after I did that.
I tried with this tutorial. I flashed system and recovery and then restart. Confirm OTA but I get ERROR.
Then I flashed boot as it was described. Now I don't get OTA In About phone, I'm still on 5.0.0, Check for updates now don't find update
Any idea?
UPDATE - UPDATE: After hour now it is here ... super, it works.
This walkthrough was most helpful! Ended up replacing the boot.img as well since I had ElementalX installed. My apps are optimizing as we speak. Thank you!
Worked for me. What a hassle!
Here is a summary of the process for those looking for a less wordy procedure, with a few added steps:
Download Nexus 5 5.0 (LRX21O) file (note: NOT 5.0.1 yet) https://developers.google.com/android/nexus/images
Unzip via 7-zip multiple times in order to get boot.img, recovery.img, system.img
Enable USB debugging: http://www.kingoapp.com/root-tutorials/how-to-enable-usb-debugging-mode-on-android-5-lollipop.htm
Plug phone into PC > cmd prompt where adb is installed > type "adb devices" to ensure connection is valid (will need to authorize via popup on phone > then "adb devices" should return your device id and "device"; if it says "unauthorized" then look for the popup on your phone)
adb reboot bootloader
Put system.img, recovery.img, and boot.img in same folder as fastboot.exe
Run commands:
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot erase cache (this is optional. I didn't have to do it, but you might)
Use Volume Up/Down to select Start > press Power Button to reboot
Update via Settings > About Phone > System Update
Re-flash TWRP recovery:
Get the file from here: http://forum.xda-developers.com/showpost.php?p=57580889&postcount=1
adb reboot bootloader
fastboot flash recovery openrecovery-twrp-2.8.1.0-hammerhead.img
Paul22000 said:
Worked for me. What a hassle!
Here is a summary of the process for those looking for a less wordy procedure, with a few added steps:
1. Download Nexus 5 5.0 (LRX21O) file (note: NOT 5.0.1 yet) https://developers.google.com/android/nexus/images
2. Unzip via 7-zip multiple times in order to get boot.img, recovery.img, system.img
3. Enable USB debugging: http://www.kingoapp.com/root-tutorials/how-to-enable-usb-debugging-mode-on-android-5-lollipop.htm
4. Plug phone into PC > cmd prompt where adb is installed > type "adb devices" to ensure connection is valid (will need to authorize via popup on phone > then "adb devices" should return your device id and "device"; if it says "unauthorized" then look for the popup on your phone)
5. adb reboot bootloader
6. Put system.img, recovery.img, and boot.img in same folder as fastboot.exe
7. Run commands:
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
8. Use Volume Up/Down to select Start > press Power Button to reboot
9. Update via Settings > About Phone > System Update
Click to expand...
Click to collapse
Maybe you could add `fastboot erase cache` as stepp 8.
gee2012 said:
Maybe you could add `fastboot erase cache` as stepp 8.
Click to expand...
Click to collapse
I added it to step 7, thanks. :good: I also cleaned up the formatting and added step 10 about re-flashing TWRP.
Loading problem
I flashed system, recovery & boot images strictly following the instructions, restarted the phone. It got stuck in loading where balls in four colors keep running for half an hour. Shall I keep waiting? I think there must be something wrong. Your advises are welcome.
guangy said:
I flashed system, recovery & boot images strictly following the instructions, restarted the phone. It got stuck in loading where balls in four colors keep running for half an hour. Shall I keep waiting? I think there must be something wrong. Your advises are welcome.
Click to expand...
Click to collapse
Try flash the partitions again. If it's still not working, you may need to reflash a factory image.
RunasSudo said:
Try flash the partitions again. If it's still not working, you may need to reflash a factory image.
Click to expand...
Click to collapse
I flashed the cache image as well, then the problem solved. Thanks
IMPORTANT NOTE ABOUT ROOTING:
After flashing TWRP 3.0.2, use the SuperSU 2.46 flashable zip, do NOT use latest version or will result in a bootloop. Good Luck and have fun with rooting.
REQUIREMENTS
1- Unlocked Bootloader (search on google if you dont know how to unlock)
2- Drivers and Adb/Fastboot commands knowledge
--------------------------------------------------------------------------------------------------------------------------------
New TWRP bugfix update! Now you can flash stock rom on TWRP without bricking! Download Page updated!
Bugs:
1- adb shell command needs to be sent before system partition is mounted or it will give an error, after doing adb shell you can mount system and do all the modifications you need.
2- You cant flash any img on twrp it gives an error, im trying to fix.
3- Backups do work, but everytime twrp restarts, the serial number folder seems to change (which means that on /TWRP/BACKUPS/serialnumber/backupsinside/ changes every reboot so you have to go get the backup inside the old serialnumber folder and put on the new serialnumber folder).
Im leaving an unsecured boot image because system does not boot android if anything seems changed. So please if system does not boot after flashing twrp/rooting, flash the unsecured boot img on fastboot
Steps to Install TWRP and root
1. Download and extrct the files: https : // drive. google . com/file/d/0BxzG5iupOOSKNTdlRC1Wd0VmTlk/view
2. Power off the tablet.
3. Enter fastboot mode by pressing the power button while holding down Vol -
4. Open up command prompt and navigate to the directory where fastboot.exe is located.
5. Pass the following commands:
fastboot flash boot unsecuredboot.img
fastboot flash recovery TWRP.img
6. Reboot into recovery (TWRP) and install SuperSU v2.46.zip ---
Continuation 6. Step by Step of Step 6 since people seem to have been running into issues with it:
After rebooting to TWRP and having SuperSU.zip in the tablet storage. Go on Install tab and press the supersu file and install/flash it then reboot the device.
I have was trying to flash the TWRP recovery in my phone (Redmi 4a), but the recovery always got replaced after every reboot with the STOCK recovery.
I am now going to show how to flash this, beside the command line technique......(Although, some command line is necessary).....
1. Set adb and fastboot files in your Windows pc, fine
2. Now download the required twrp on to your pc and place it in adb-fastboot's folder.... or techies could path to that ****....
3. Enter bootloader with.....
adb reboot bootloader4. Now boot to twrp using......
fastboot boot recovery.img(I have named that twrp file as recovery)
5. Download super su zip, move it in phone, root your device....... reboot your device.......Now the second phase of process comes
6. Install twrp app in your phone, open it, copy the twrp image file to phone, tap on flash recovery
7. Select your twrp recovery in the phone and boom....... you have done it...... reboot to recovery by adb reboot recovery
I FORGOT TO MENTION, you should have your device unlocked, and I AM NOT RESPONSIBLE FOR ANY MISHAP and FOR THE STATE TO PLAY CRICKET WITH YOUR PHONE...... I am honest ....... IT WORKED FOR ME......
any tester n confirmed worked ?
No reason to do all those, you can flash recovery directly from fastboot with one command. The command:
Code:
fastboot boot recovery.img
just boot to that recovery one time. This is good for testing a recovery or use it for one time without install it.
If you want to flash a recovery you just need to use:
Code:
fastboot flash recovery recovery.img
Also for both commands isn't necessary to rename the recovery file or to put it adb folder, or root the device. Just need to specify the path and filename in place of "recovery.img". For e.g:
Code:
fastboot flash recovery C:\Phone\Recoveries\twrp_3.2.1.img
I couldn't find any guide for rooting the V40, so I thought I'd write down the steps I took to root my new EUR V40 - LMV405EBW. Maybe it will help others. Sorry if this is somewhat confusing, I didn't have time to make a polished version. It's basically made from my notes during the process with the commands copied from bash history.
-First, unlock the bootloader following LG's instructions here: https://developer.lge.com/resource/mobile/RetrieveBootloader.dev
There's no TWRP for the V40 and the one made for G7 doesn't work. I don't have the time and knowledge to even attempt to compile TWRP for the V40, so I proceeded with just patching an original boot image with Magisk.
You can get the patched boot images that I used from here:
Oreo 10e: boot_a_magisk_patched_10e.img
Oreo 20f: boot_a_magisk_patched_10f.img
Pie 20a: boot_a_magisk_patched_20a.img
Pie 20b: boot_a_magisk_patched_20b.img
Pie 20f: boot_a_magisk_patched_20f.img
Pie 20g: boot_a_magisk_patched_20g.img
Q 30b: boot_a_magisk_patched_30b.img (this requires flashing to the active boot partition).
Q 30c: boot_a_magisk_patched_30c.img (this requires flashing to the active boot partition)
Q 30d: boot_a_magisk_patched_30d.image (this may or may not work with "fastboot boot" and could require flashing to the active boot partition. I haven't tested if live boot still works. I just did fastboot flash boot_x img_file).
You can try to boot it with with fastboot if you have a LNV405EBW and skip the KDZ extraction part.
Installing Magisk:
Flashing this image isn't necessary, just straight boot should be sufficient and safe.
First install Magisk Manager 7 on the phone then connect the phone to the PC and run:
Code:
adb reboot bootloader
fastboot boot boot_a_magisk_patched_10e.img
After the phone boots the OS with the external boot image, open Magisk Manager and tap on Install. Select the option to Direct install to the active slot. I played it safe and decided to NOT flash also on the inactive slot. I've left it alone so I can use it in case of need of recovery.
You'll probably notice that you don't have a connection to the carrier. Just ignore it, it will back once the phone is booted normally.
Reboot and you will have permanent root until you switch the A/B slots.
In case my patched boot image doesn't work, you can just make your own.
Tools needed:
Magisk Manager 7.0.0 installed on the phone
LG Bridge installed on a Windows machine.
a Linux machine or VM (I used the latest ubuntu desktop), python3 with the zstandard module installed and kdztools from steadfasterX's repo. Maybe kdztools would work on Windows too, I haven't tried it.
adb, fastboot
You need to procure an original ROM file for your phone model. It can be downloaded easily with LG Bridge. Just connect the phone to a Windows PC, start LG bridge, go to the Software update tab and click on Update error recovery. Wait for the download to start and disconnect the phone. Ignore LG Bridge complains about not being able to flash after the downloading stage is completed. Don't click anything in Bridge and before closing it go to C:\Users\<your_username>\AppData\Local\LG Electronics\LG Bridge\SWUpgrade and copy your KDZ somewhere else. Preferably send it to the Linux VM to the LG work folder, it'll be needed there.
On Linux open a terminal:
Code:
cd ~/Documents
mkdir LG
cd LG
git clone https://github.com/steadfasterX/kdztools.git
cd kdztools
nano undz.py -c
For kdztools to be able to extract the V40 images, I needed to edit undz.py and comment the lines 88-90. So, this block should all be commented or undz will fail to extract the boot partitions.
Code:
#if len(dz_item['pad']) != 0:
# print("[!] Error: pad is not empty", file=sys.stderr)
# sys.exit(1)
To extract, with the KDZ copied to ~/Documents/LG/
Code:
cd ~/Documents/LG/kdztools
./unkdz.py -f ../V405EBW10e_00_OPEN_EU_DS_OP_0109.kdz -x
cd kdzextracted/
List the partitions contents and look for the IDs of boot_a and/or boot_b. In my case they were 44 for boot_a and 63 for boot_b
Code:
../undz.py -f V40510e_00.dz -l
Extract boot_a or boot_b or both, they're identical:
Code:
../undz.py -f V40510e_00.dz -s 44
../undz.py -f V40510e_00.dz -s 63
You can find the extracted boot images in the dzextracted subfolder. Get boot_a.image or boot_b.image or both from there and send them to the phone in a location accessible by Magisk Manager. The Download folder should do fine.
Open Magisk Manager and tap Install, select Patch Boot Image file and patch the image file(s) you extracted. Get the patched_boot.img that Magisk Manager saves in the Download folder and send it to a PC where you have adb and fastboot.
Go to the beginning of the post to the Installing Magisk section.
Damned tempting, but I'll wait until after Pie drops.
Sent from my LM-V405 using Tapatalk
Glad to see this, hopefully it's a start for all of us.
If anything, at least a way to unlock the bootloader via legitimate channels! Gonna be generating that string, next chance I get, to be ready.
Sent from my LM-V405 using Tapatalk
Once runningnak3d gets a hold of this, we should be good with the v40. Cool beans.
Hey do the unlock codes online work for $ 12-15 on sprint? I used to flash phones back in the day and got a great deal on a bad IMEI sprint lg v40, but so far I can see there isn’t a way yet. On top off all that I m in Europe and don’t want to get the error message that I m out of the Region. I would have to go to USA just to unlock the phone.
@runningnak3d
Can't I install the firmware on a different device?
V version can not unlock BL, so envious
Getting a boot image like that works but I find it stupid to not upload it so that the others don't have to do it. Besides only one model can be bl unlocked so there won't be any model mismatch (except firmware versions but keeping up with them is not that hard)
LameMonster82 said:
Getting a boot image like that works but I find it stupid to not upload it so that the others don't have to do it. Besides only one model can be bl unlocked so there won't be any model mismatch (except firmware versions but keeping up with them is not that hard)
Click to expand...
Click to collapse
Or I could find you stupid for not noticing the patched image is in my first post.
DLS123 said:
I find you stupid for not noticing the patched images are in my first post.
Click to expand...
Click to collapse
I recommend labeling the boot images with their firmware since future firmwares won't be able to run the same boot image but other than that I'm really sorry.
LameMonster82 said:
I recommend labeling the boot images with their firmware since future firmwares won't be able to run the same boot image but other than that I'm really sorry.
Click to expand...
Click to collapse
I mentioned in the description 1 line below the link that it's for 10e. There was no other update in a long time. I don't think there can be any confusion for now. I can edit and label the file when there's will be another fw update.
It looks like unlocking the bootloader breaks Widevine L1 on the V40 and downgrades is to L3. No more HD or UHD Netflix.
I couldn't find any other solution than to re-lock the bootloader to restore L1.
This doesn't happen on the V30.
@DLS123
Thank you for all!
I ask you for more details; i'm stuck at flashing first image in adb; it returns an error; have LMV405EBW with 10f. unlocked bootloader of course
Thx again for your support!
@daphix what do you mean by flashing the first image? You're not supposed to flash my patched boot image. Just boot it without flashing and Direct install Magisk from it with Magisk Manager.
DLS123 said:
@daphix what do you mean by flashing the first image? You're not supposed to flash my patched boot image. Just boot it without flashing and Direct install Magisk from it with Magisk Manager.
Click to expand...
Click to collapse
Thx for answer; i not have too much experience in working with Magisk;
i just folowed your steps:
First install Magisk Manager 7 on the phone then connect the phone to the PC and run:
adb reboot bootloader
fastboot boot patched_boot_a.img
when i run fastboot comand for flash, is runing, but is returning "an error at line x"
i suppose is something wrong in this instructions.
daphix said:
Thx for answer; i not have too much experience in working with Magisk;
i just folowed your steps:
First install Magisk Manager 7 on the phone then connect the phone to the PC and run:
adb reboot bootloader
fastboot boot patched_boot_a.img
when i run fastboot comand for flash, is runing, but is returning "an error at line x"
Anyway; understand now what to do;
Steps are below:
- first install magisk manager
- download magisk zip from magisk site or from magisk manager himself on phone
- download patched_boot_a.img to phone from our good contributor
- use magisk manager and select inslall image of patched_boot_a.img from phone
- magisk manager will generate a magisk patched image
- transfer this magisk patched image (not patched_boot_a.img) to pc in ADB folder
- flash with Adb this magisk patched image from pc to phone.
Thx to our friend!
---------- Post added at 09:53 AM ---------- Previous post was at 09:21 AM ----------
DLS123 said:
@daphix what do you mean by flashing the first image? You're not supposed to flash my patched boot image. Just boot it without flashing and Direct install Magisk from it with Magisk Manager.
Click to expand...
Click to collapse
Hi;
using Magisk mamanger and your file was generated a file: magisk_patched.img
pls support; trying to flash that image from PC with adb not work:
fastboot flash partition_a magisk_patched.img
Click to expand...
Click to collapse
@daphix
Whatver you're trying to do, is nowhere in the procedure I used. If you already booted with my boot image why are you making another boot image with Magisk and why are you trying to flash that? I never wrote anything of the sort.
if you booted with my patched image you already have temporary root and can use Magisk Manager to Direct install Magisk itself.
DLS123 said:
@daphix
Whatver you're trying to do, is nowhere in the procedure I used. If you already booted with my boot image why are you making another boot image with Magisk and why are you trying to flash that? I never wrote anything of the sort.
if you booted with my patched image you already have temporary root and can use Magisk Manager to Direct install Magisk itself.
Click to expand...
Click to collapse
Hi , thank you for reply;
I tried many combinations of your commands;
maybe due that am noob, but succesion below simply is not working:
First install Magisk Manager 7 on the phone then connect the phone to the PC and run:
adb reboot bootloader
fastboot boot patched_boot_a.img
Very nice to see Y700 get it's own place on XDA! I myself had just bought the 12GB version and have been very satisfied. The tutorials and info related to this model had been very difficult to come by and mostly in other languages, so I had to do my own research and exploration. So far I was able to flash ROM and extract it's boot image for root thanks to the following tutorial (in Japanese)
boot.imgを入手できない機種でMagiskを導入する方法【DSU Loader】
Android端末のカスタマイズやRoot権限の使用が可能となる「Magisk」ですが、一部例外を除き、導入に…
smartasw.com
The boot image extraction part is trickier as Y700's roms come in GSI form. But with a workaround we can still achieve the same goal. (I heard that you can also use QFIL to do that but I haven't been able to make the tool work, so if someone else can make a tutorial that'd be great)
First you need to prepare:
- DSI-Sideloader from https://github.com/VegaBobo/DSU-Sideloader/releases
- Magisk Manager from topjohnwu's GitHub repo
- a GSI ROM with built in root permission. The one the tutorial was using: https://github.com/phhusson/treble_experimentations/releases/tag/v402 --> go download "system-squeak-arm64-ab-vanilla.img.xz" (~600MB, smallest needed to fulfill the task)
- turn on developer mode and ADB debugging. Get Google SDK platform tools ready and USB drivers installed.
Connect your Y700 to a computer. Check if ADB works.
Next, install the DSI-Sideloader app. Also extract the .xz package you downloaded above to get the .img image (should be ~1.7GB in size)
Copy the image to your Y700 tablet. Open the DSI-Sideloader app, load the image, set userdata size to default (2GB). You can leave image size unchanged.
NOTE: if you have an SD card inserted, click on "config" and check "Unmount SD", or just eject your SD card from tray. Failing to do so will result in error in the install step.
After you're done, click "Install". Once finished there will be a pop-up with commands you need to enter in the terminal of your choosing. On your computer navigate to the directory containing executables of Google SDK platform tools, fire up terminal, enter the 1st command (says non-root) as instructed, and run it.
You will see a progress bar in the drop-down notification area which will complete in a moment and prompt you to reboot. Do that from there.
After reboot you will be running the modded Project Treble ROM, with root access. It's a full fledge OS but once you shutdown / reboot you will go back to your own OS. Treat it as a LiveCD of some sort.
While still connected, turn on dev mode + ADB debugging and go back to terminal for some ADB work. Next we will be extracting boot image under the current environment, made possible by it's built-in root permission.
Run the following line by line:
Bash:
adb shell
Bash:
su
Bash:
cd /dev/block/bootdevice/by-name/
Bash:
mkdir /sdcard/backup_img
Bash:
for file in *; do
if [[ "${file}" = boot* ]]; then dd if=/dev/block/bootdevice/by-name/"${file}" of=/sdcard/backup_img/"${file}".img ; else continue ; fi
done
The 4th command creates a new directory storing extracted boot image, in our case /SD card/backup_img; and the 5th command is the meat of the entire process. It consists of 3 lines, key in one at a time and press "Enter". First line is "for...do", second is "if [[..." to "fi", third is just "done".
After some time the extracted boot image will be stored under the directory specified by the 4th command, in our case /sdcard/backup_img . They are stored in the temporary user space and once you reboot to your original OS you won't be able to access them again. So you need to turn on File Transfer mode, go to the actual directory on your PC and move them to your computer. They have the filenames "boot_a.img" and "boot_b.img" . After you're done, just reboot as usual and you'll get into your old OS.
Now you have the boot images, all that's left is to use Magisk Manager to patch them, enter fastboot mode, and flash the patched images using the following commands:
fastboot flash boot_a patched_img_A.img
fastboot flash boot_b patched_img_B.img
(Rename as needed)
And now your Y700 is rooted.
The linked Japanese webpage also talks about working Android 12 / 13 GSI flavors, patches, and ways to set up your Y700.