Database Develop

[TUTORIAL] Downgrading to EMUI 8 using HiSuite

When I was trying to downgrade the old phone of my GF (single SIM, FIG-LX1 or P SMART 1st gen) all of the tutorials didnt work for me at all.
The one with Huawei Firmware Finder via Google Play was tedious altough i know how to change DNS, use eRecovery and all that jazz didnt work at all and the phone would throw me fit after fit.
Then I was reading too use older versions of HiSute and again change DNS and i gave up cause all ended up not working and thats how I figured out a way myself.
I will not be responsible if you lose any of your data doing this since it will wipe the phone completly
You will need:
- The phone ofc - make sure its charged all the way
- USB cable
- SD Card minimum 8GB
- Huawei P Smart FIG-LX1 FIG-L11 FIG-L31 hw eu HLRCF Figo-L11 Figo-L31 9.1.0.115(C432E5R1P3T8) Firmware 9.0.0 r3 EMUI9.0.1 05014XFJ 05014XMW - search androidhost.ru
- HiSuite
Steps:
1. Download the mentioned firmware from androidhost.ru
2. Extrach the dload folder from the zip to your desktop
3. Place the dload folder in the root directory of your SD Card (use a formatted one min. 8GB capacity)
4. Power down the phone, install SD Card and hold both volume buttons while powering on the phone to engage Force Update
5. Let the update finish its job and the phone will reboot too setup screen so just quickly set it up to reach the homescreen.
6. Connect the phone via usb and choose file transfer (for me it only worked that way)
7. Under my computer right click on HiSuite open and click HiSuiteDownloader
8. Finish installing HiSuite and follow on-screen instructions so the phone will be detected and connected to HiSuite.
9. Click Update and now bottom right of the window it should ask you for older version so click on it and it will present you with going back to EMUI 8.
(Explanation: I figured out if you run the latest version of EMUI 9 HiSuite will not present you a older version button thus you cant follow the process in my tutorial so thats why you downloaded the very first EMUI 9 build where it lets you do it)
10. Let HiSuite do its thing like downloading, installing and so on and do not unplug the phone until you come back to the setup screen which will be the EMUI 8 style one.
11. Good job :good: you finally downgraded to android 8.0 and now can unlock the bootloader if you choose so (unlocking costs money - search another thread for that i only focused on downgrading the phone so you can do it if you wish)
Well I hope this tutorial will help you as it helped me!
Feel free to like/thanks this thread and share if it worked or not

Hello! I have the FIG-LX1 vodafone Spain (only I can use one sim card). With Emui 9.1 and dicember 2019 Android patch security. Could I follow the process? Thanks!

I tried this and it worked, thank you! I was getting really mad at the slowiness of this phone in EMUI 9, it was getting worse in every update.
I also want to point one thing. You mentioned a firmware download on android-host.ru of " Huawei P Smart FIG-LX1 FIG-L11 FIG-L31 hw eu HLRCF Figo-L11 Figo-L31 9.1.0.115(C432E5R1P3T8) Firmware 9.0.0 r3 EMUI9.0.1 05014XFJ 05014XMW". While this may be right for your phone model, it may not work on every model. As I see from your post, you have the C432 model. People should look for the firmware for their model or else it may not work (in my case it was C02 and I also found it on android-host.ru).
Other thing I would like to point out is a question. I am not experienced in smartphone modding but as you downloaded the 9.0 firmware in order to downgrade from HiSuite, couldn't you just have donwloaded the 8.0 firmware and install it up front instead of having to pass in HiSuite? (I have not tried this, I have sticked to the instructions provided here. As I said, I do not know much of this).
Nonetheless, thank you again for making my phone usable!

TOY_O_MACHO said:
I tried this and it worked, thank you! I was getting really mad at the slowiness of this phone in EMUI 9, it was getting worse in every update.
I also want to point one thing. You mentioned a firmware download on android-host.ru of " Huawei P Smart FIG-LX1 FIG-L11 FIG-L31 hw eu HLRCF Figo-L11 Figo-L31 9.1.0.115(C432E5R1P3T8) Firmware 9.0.0 r3 EMUI9.0.1 05014XFJ 05014XMW". While this may be right for your phone model, it may not work on every model. As I see from your post, you have the C432 model. People should look for the firmware for their model or else it may not work (in my case it was C02 and I also found it on android-host.ru).
Other thing I would like to point out is a question. I am not experienced in smartphone modding but as you downloaded the 9.0 firmware in order to downgrade from HiSuite, couldn't you just have donwloaded the 8.0 firmware and install it up front instead of having to pass in HiSuite? (I have not tried this, I have sticked to the instructions provided here. As I said, I do not know much of this).
Nonetheless, thank you again for making my phone usable!
Click to expand...
Click to collapse
@TOY_O_MACHO Where have you found the C02 firmware? I try to find it with EMUI 9 version and i cant find anything. I only see this one:
HUAWEI P SMART FIG-LX1 FIG-L11 VODAFONE DEFAULT FIGO-L11 8.0.0.138(C02) FIRMWARE 8.0.0 R1 EMUI8.0 05014XVU.ZIP
Thanks!

T2iw said:
@TOY_O_MACHO Where have you found the C02 firmware? I try to find it with EMUI 9 version and i cant find anything. I only see this one:
HUAWEI P SMART FIG-LX1 FIG-L11 VODAFONE DEFAULT FIGO-L11 8.0.0.138(C02) FIRMWARE 8.0.0 R1 EMUI8.0 05014XVU.ZIP
Thanks!
Click to expand...
Click to collapse
I think that this is the first 9.1 version with C02 (15-june-2019)
Huawei P Smart FIG-LX1 Fig-L11 vodafone default HLRCF Figo-L11 9.1.0.115(C02E6R1P3T8) Firmware 9.0.0 r3 EMUI9.1.0 05014XVU [androidhost.ru].zip

Starting from 9.1.0.176 (C02E11R1P5) I've downgraded to 9.1.0.115(C02) through sdCard.
Then through HiSuite downgraded to 8.0.0.144(C02).
Next step ---> unlook bootloader!
---------- Post added at 09:02 PM ---------- Previous post was at 08:55 PM ----------
TOY_O_MACHO said:
... I am not experienced in smartphone modding but as you downloaded the 9.0 firmware in order to downgrade from HiSuite, couldn't you just have donwloaded the 8.0 firmware and install it up front instead of having to pass in HiSuite? (I have not tried this, I have sticked to the instructions provided here. As I said, I do not know much of this).
Nonetheless, thank you again for making my phone usable!
Click to expand...
Click to collapse
I've tried with 8.0.0.134(C02) through SdCard but the process fails on start.
I don't know if repeating the procedure without HiSuite(putting in SdCard 8.0.0.134(C02)) would have worked equally well.

Got it Working perfectly from 9.1.0.203(C432E11R1...) to 8.0.0.176(C432).
1 Step Closer to Bootloader Unlock

Im sorry to say but this guide does not work.
At least, not for my region which is c782 (UK). I did try with the rom you mentioned anyway, just in case the region would not matter but obviously it does.
There doesnt appear to be a 9.0.x version available for my region on android host so I guess I am totally stuck.
I've tried every downgrade tutorial in existance and none work. every dload method seems to fall over. Tried both androidhost.ru and firmware finder roms and just get nowhere. I give up!

Thank you. I was able to downgrade a FIG-LX1 that was not running latest EMUI 9.1 to EMUI 8.0, and then used another tutorial to flash and older version of EMUI and unlock its bootloader.

Anyone having the 9.1.0 C40 or C900 version by any chance?

Samsung Note 9 will not update 8.1.0

Hi, don't know if anyone can help?
I live in the UK and have a Samsung Note 9 which came from the UAE. The phone will not update and is currently Android version 8.1.0 with security patch dated 01/11/18.
I have tried updating via Samsung Smart Switch.
I have cleared the cache, done a factory reset and checked if the phone is rooted, which it isn't.
I believe the only way to update the android version is to do it manually, can anyone help with this.
The phone is SM-N960F dual sim Serial Number RF8KC1DMFSR
Thanks

ILecky said:
Hi, don't know if anyone can help?
I live in the UK and have a Samsung Note 9 which came from the UAE. The phone will not update and is currently Android version 8.1.0 with security patch dated 01/11/18.
I have tried updating via Samsung Smart Switch.
I have cleared the cache, done a factory reset and checked if the phone is rooted, which it isn't.
I believe the only way to update the android version is to do it manually, can anyone help with this.
The phone is SM-N960F dual sim Serial Number RF8KC1DMFSR
Thanks
Click to expand...
Click to collapse
Dial *#1234# and send me screenshot
I'll give you firmware links for latest android 10 for your model
You can flash via odin tool from pc.

Just go to https://www.sammobile.com/firmwares/ and run a check for the OS for your device. Download it, connect your device to a computer and use Odin to install it onto your device.

ILecky said:
Hi, don't know if anyone can help?
I live in the UK and have a Samsung Note 9 which came from the UAE. The phone will not update and is currently Android version 8.1.0 with security patch dated 01/11/18.
I have tried updating via Samsung Smart Switch.
I have cleared the cache, done a factory reset and checked if the phone is rooted, which it isn't.
I believe the only way to update the android version is to do it manually, can anyone help with this.
The phone is SM-N960F dual sim Serial Number RF8KC1DMFSR
Thanks
Click to expand...
Click to collapse
any luck with your issue? if not send a screen shot of your software information... btw i have same N960F/DS which is from UAE and and i never had issues with updates in my country SL

Please find info as requested. Thanks
Trex888 said:
Dial *#1234# and send me screenshot
I'll give you firmware links for latest android 10 for your model
You can flash via odin tool from pc.
Click to expand...
Click to collapse
For some reason I couldn't paste a picture in the reply to you so I have typed the info. Hope this helps
AP:N960FXXS2ARK3
CP:N960FXXU2ARJ1
CSC:N960FOXM2ARK2
Model:SM-N960F/DS
Thanks

ILecky said:
For some reason I couldn't paste a picture in the reply to you so I have typed the info. Hope this helps
AP:N960FXXS2ARK3
CP:N960FXXU2ARJ1
CSC:N960FOXM2ARK2
Model:SM-N960F/DS
Thanks
Click to expand...
Click to collapse
Here is the firmware link for your model android 10 latest.
https://de1.androidfilehost.com/dl/...261759684/N960FXXS5DTB6_N960FOXM5DTB6_XSG.zip
First install Samsung USB mobile drivers on pc
Extract the firmware file
Warning
Before flashing must Backup all your data and must Do factory reset your device to remove all your accounts to avoid FRP lock.
Boot device into download mode
Use latest odin tool to flash
And do wipe data factory reset from stock recovery after flashing to get clean operating system.
Forst boot may take upto 10 minutes so be patient.
Please note
If you flash android 10 you won't be able to downgrade to oreo or pie again.
Good luck.

shouldnt use DTB6 firmware (March update) which was reported to cause some users' fail screens.
there was May update yesterday for N960F ver DTE2.
https://www.sammobile.com/samsung/galaxy-note9/firmware/SM-N960F/DBT/download/N960FXXS5DTE2/338040/

Link not working
Trex888 said:
Here is the firmware link for your model android 10 latest.
First install Samsung USB mobile drivers on pc
Extract the firmware file
Warning
Before flashing must Backup all your data and must Do factory reset your device to remove all your accounts to avoid FRP lock.
Boot device into download mode
Use latest odin tool to flash
And do wipe data factory reset from stock recovery after flashing to get clean operating system.
Forst boot may take upto 10 minutes so be patient.
Please note
If you flash android 10 you won't be able to downgrade to oreo or pie again.
Good luck.
Click to expand...
Click to collapse
Hi, thanks for the info however the link does not appear to work?

ILecky said:
Hi, thanks for the info however the link does not appear to work?
Click to expand...
Click to collapse
Better you download from sammobile website
https://www.sammobile.com/samsung/galaxy-note9/firmware/SM-N960F/DBT/download/N960FXXS5DTE2/338040/

Sorry for been a pain
Trex888 said:
Better you download from sammobile website
https://www.sammobile.com/samsung/galaxy-note9/firmware/SM-N960F/DBT/download/N960FXXS5DTE2/338040/
Click to expand...
Click to collapse
Just checking the file on the link is for Germany, is this correct as I live in the Uk and phone was from Dubai. Thought best to check before I download etc.
Thanks

ILecky said:
Just checking the file on the link is for Germany, is this correct as I live in the Uk and phone was from Dubai. Thought best to check before I download etc.
Thanks
Click to expand...
Click to collapse
As far as I understand, your phone has OXM which includes multi CSC, so it doesn't matter which firrmware you can download and flash.
If you have doubt, just install Samsung Phone Info from playstore. In CSC code tab, check what is its original csc.
Use samfirm or frija to download at very high speed.

ILecky said:
Just checking the file on the link is for Germany, is this correct as I live in the Uk and phone was from Dubai. Thought best to check before I download etc.
Thanks
Click to expand...
Click to collapse
This is multi csc firmware so don't worry it will detect your sim card and select csc/country code automatically where you live.

Thanks all working
Trex888 said:
This is multi csc firmware so don't worry it will detect your sim card and select csc/country code automatically where you live.
Click to expand...
Click to collapse
Thanks for your help. My phone is now running on Android 10, the only thing now to do is to setup all the apps etc (I used smartswitch prior to flashing).
Once again thanks for your help.

ILecky said:
Thanks for your help. My phone is now running on Android 10, the only thing now to do is to setup all the apps etc (I used smartswitch prior to flashing).
Once again thanks for your help.
Click to expand...
Click to collapse
Thanks to xda and android open source and Samsung for firmware.
We are always happy to help.

Huawei P40 Pro Firmware where find to ?

Hi, i've searched so much for but can't find any Firmware for the P40 Pro ELS-NX9. Does anyone know where i can find it ?
The only one i've found is from a russian server and it doesnt work says always wrong device.

ELS-LGRP4-OVS firmwares should work. I flashed ELS-LGRP4-OVS 10.1.0.148 Full OTA from Firmware Finder (Download Link) using Hisuite Proxy and it worked perfectly with my ELS NX9.

Thanks i will try it.

jericho246 said:
ELS-LGRP4-OVS firmwares should work. I flashed ELS-LGRP4-OVS 10.1.0.148 Full OTA from Firmware Finder (Download Link) using Hisuite Proxy and it worked perfectly with my ELS NX9.
Click to expand...
Click to collapse
Hi, thanks for that information. Can you help/direct me to a guide to install firmware for Huawei? I am new to something like that, do I need a NM card to install firmware from that? Kind regards

Tried it, it works, have to write hisuite proxy firmware on youtube und follow the guide videos vom team mt. Dont need a card. Regards

LevsOG said:
Hi, thanks for that information. Can you help/direct me to a guide to install firmware for Huawei? I am new to something like that, do I need a NM card to install firmware from that? Kind regards
Click to expand...
Click to collapse
@kyero985 wrote a guide in another thread, here:
kyero985 said:
Hey everyone,
So after bouncing around the P30P HiSuite proxy method thread and thanks to @jericho246 for his earlier post with the path to the .148 full OTA package, I have successfully flashed .148 from .136 for my EU C432 ELS-NX9 as shown below. It's possible to do the same for C605 and the other regions as well assuming you have the correct, approved firmware too. For those on C432, I feel your pain having to wait so long for a working solution as EU always seem one of the last continents to get the newest updates. So now we can have the June and July Android security patches and hopefully all the camera and other improvements carried over across, including .142. Big thanks to the OP @@SilviuO , @IProfessor and everyone from the original source as well that made this all possible for us P40P users: https://forum.xda-developers.com/hu...de-how-to-flash-approved-fullota-zip-t4112775
This method will also work for those coming from even older versions prior to .136, assuming you use the newest approved firmware for your region and model and that Firmware Finder says it's safe for installation. I wouldn't recommend trying to flash any unapproved versions for your device even if it might look like there's a newer version available on FF as it's probably not for your region yet!
CHECK for your approved OTA Firmware FIRST: Download and install MT Firmware Finder here to check that your firmware is approved and usable for your P40P. DO NOT try to flash firmware that isn't approved and/or isn't designed for your region as this might brick or mess up your device! For example, TN-AN00 is for Chinese region models and not for C432/C636/C605 models. Click for the Google Play Store mirror for those with working GMS
NOTE: I did not need to do full a wipe but backed up via HiSuite anyway just in case. All of my apps and settings remained intact after the update. I don't have GMS so can't confirm if that's still working though.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Download and install the latest Hisuite_10.1.0.550_OVE Desktop Client on to your PC (you DON'T need to locally download the full OTA as HiSuite will do that for you later)
2. Connect your P40P to your computer, making sure ADB USB debugging is enabled under your Android Dev options and agree to install the HiSuite app on your P40P when prompted. Continue with the next steps until the HiSuite desktop client recognizes your device (the app will ask you an authentication code as well if you've not used HiSuite before). Do a local Backup of all your data to your PC just in case while we're here.
3. Close down your HiSuite Desktop client and download and run the HiSuite proxy.exe (unzip all of the files first to anywhere you'd like)
4. Configure your HiSuite proxy for the suitable version and software region of your P40P. Your cust/model is shown next to your firmware build number under Software Update/About Phone.
FIND THE URL TO YOUR UPDATE THROUGH THE WEB-BASED FIRMWARE FINDER PAGE HERE (make sure you check your region and model back on the app to ensure it's definitely approved for your P40P, in my instance for my EU C432 ELS-NX9, the model began with ELS-XXX)
For .1XX -> .148 C432 EU ELS-NXX MODELS ONLY: Paste this URL for .148 in the package path: http://update.dbankcdn.com/TDS/data/files/p3/s15/G5633/g1604/v434397/f1/ , followed by ELS-LGRP4-OVS 10.1.0.148 as the version next to it and tick the 'Point Version' checkbox. After that, click on the Setup button to finish the proxy configuration. From what I understand, .147, .148 & .149 are identical anyway according to the update log so just edit the version number and paste the new package URL for that one instead if you want to flash another build as stated in the online Firmware Finder database above (make sure the path ends in /f1).
Make sure the output log says it's ready for installation before you proceed and don't close it (as shown in the attached picture). If it comes up with any error messages, make sure your antivirus/firewall isn't blocking it.
5. Launch your HiSuite Desktop Client again, connect your P40P and click on the Software Update option after which it will detect .148 or the build you pointed the HiSuite proxy to. Keep your HiSuite proxy app open in the background throughout the update process!
6. That's it, all done! It's worth wiping the cache partition too in Android recovery mode if you'd like as that's what I like to do every time there's a large update.
I hope this helps you all and good luck!!! :good::highfive:
Click to expand...
Click to collapse

One question. I downgraded my firmware to 131 to be able to install the google services. Now regulary update to the recent firmware (automatic updates through phone) doesn´t seem to work. It says 131 is the recent firmware (one my phone). Is this normal or is there a workaround? Thanks for any infos

have a question, mi p40 pro its ELS NX9 but de custom its C10 (C10E7R4P1) can downgrade? and where find the firmware url to use a hisuite proxy.
thanks.

jericho246 said:
@kyero985 wrote a guide in another thread, here:
Click to expand...
Click to collapse
hey!
how can i look for firmware that is for c150? i dont know it. thx

Question Call recording Realme 8 Pro

Hey,
I saw a number of Youtube videos named "Realme 8 | 8 Pro call recording" from India where they show how to enable call recording even with Google Phone (by joining beta and just enabling the feature). I don't see that option on my phone (bought in Poland / UE with ROM compilation RMX3081_11_A.28 ). I also saw suggestions to change the location in settings to India but it didn't work. In some other thread there was and answer that this option could be enabled by editing two files but the phone would need to be rooted.
Are those videos fake or maybe it is possible to load different official ROM and have call recording enabled ?
Would it be possible to load one of these ROMs :
Oppo Stock ROM
Find Oppo and Realme Stock ROM (Firmware) for various Oppo/Realme Devices. All the Oppo/Realme Firmwares listed are available for free.
oppostockrom.com
Changed Domain
If so, which one ?
Should I do it with the method described by StratOS_HTC here ? :
https://forum.xda-developers.com/t/how-to-prepare-to-do-a-flash-a-start.4356689/
I tried to follow that guide and :
a) in step "go to download mode" : Unplug the USB connection - Press and click the Ver 1.2 at bottom :
I was stuck running QFIL and having no idea where to get "Programmer" and "build" files with black screen on my phone.
b) in the optional step " Or in the Bootloader interference when flashing throught Realme app :"
I downloaded the RMX3081_11_A.42 ROM from : http://www.frpbdteam.online/ and when tried to flash it I ended up with an error "realme flash cannot find central directory"

Cześć,
mam ten sam problem (również w Polsce). Czy udało Ci się go naprawić?
Pozdrawiam,
Marcin
______________________________________________________________________________
Hi,
I have same problem (also in Poland). Did you manage to fix it?
Regards,
Marcin

Currently without extra devices, dongles ... the available process (official flashes) are to be done with system OTA update with VPN in Poland, Germany.
Or partialy manual flash via ozip in recovery.
Of course the official way with MSM (also paid).
Qfil and any firehose loader doesn't work good...
Oppo flash tools are only for the devices with unlocked bootloaders. RMX3081 still have none of the all and extra needed for above.

Thanks for a quick response. I'm not a professional IT specialist, so I'll be glad if you explained it to me like I'm a 6-year-old. My system is RMX3085. I used Cube ACR at my older Huawei Mate 10 Lite and it worked fine. Now I have Realme 8 for 2 weeks, tried 4 different call recorders and none of them works on Realme 8...

Fur sure, they all need root acess ... If you are talking to Realme 8, the root there is possible, but for RMX3081 is still not possible to do that.
Or use of the External app to like Realme Call Recorder to grant access to other apps ...
And acess to messages Haven't tried it, but know it will work even without root.

I tried Realme Call Recorder - the effect is the same - on recordings I hear only myself, I don't hear the interlocutor.
If the root is not possibile on RMX3081 then I suppose it's not possibile on RMX3085 either...
What do you mean by "access to messages"?

Root for RMX3085 is available also all other stuff ...

StratOS_HTC said:
official flashes are to be done with system OTA update with VPN in Poland, Germany.
Click to expand...
Click to collapse
that seems interesting - would you elaborate ?
Lets say I run VPN to India on my router - would you say that in that scenario I would have some more options to change from GDPR rom to some other in which I would have call recording enabled ?
StratOS_HTC said:
Or partialy manual flash via ozip in recovery.
Click to expand...
Click to collapse
Would you point to some tutorial ? I tried your's and end up no where.
Możej said:
I tried Realme Call Recorder - the effect is the same - on recordings I hear only myself, I don't hear the interlocutor.
If the root is not possibile on RMX3081 then I suppose it's not possibile on RMX3085 either...
What do you mean by "access to messages"?
Click to expand...
Click to collapse
As a workaround I'm currently using ACR ( https://play.google.com/store/apps/details?id=com.nll.acr ) with audio boost (15 dB) - you will find it in the app settings under recording. It listens to the speaker and the caller is hardly heard while my voice is too loud but it is enough if your call was in quiet environment.

HarryBoks said:
Hey,
I saw a number of Youtube videos named "Realme 8 | 8 Pro call recording" from India where they show how to enable call recording even with Google Phone (by joining beta and just enabling the feature). I don't see that option on my phone (bought in Poland / UE with ROM compilation RMX3081_11_A.28 ). I also saw suggestions to change the location in settings to India but it didn't work. In some other thread there was and answer that this option could be enabled by editing two files but the phone would need to be rooted.
Are those videos fake or maybe it is possible to load different official ROM and have call recording enabled ?
Would it be possible to load one of these ROMs :
Oppo Stock ROM
Find Oppo and Realme Stock ROM (Firmware) for various Oppo/Realme Devices. All the Oppo/Realme Firmwares listed are available for free.
oppostockrom.com
Changed Domain
If so, which one ?
Should I do it with the method described by StratOS_HTC here ? :
https://forum.xda-developers.com/t/how-to-prepare-to-do-a-flash-a-start.4356689/
I tried to follow that guide and :
a) in step "go to download mode" : Unplug the USB connection - Press and click the Ver 1.2 at bottom :
I was stuck running QFIL and having no idea where to get "Programmer" and "build" files with black screen on my phone.
b) in the optional step " Or in the Bootloader interference when flashing throught Realme app :"
I downloaded the RMX3081_11_A.42 ROM from : http://www.frpbdteam.online/ and when tried to flash it I ended up with an error "realme flash cannot find central directory"
Click to expand...
Click to collapse
If you can unlock bootloader of your device then follow this thread to get autocall recording feature.
Method to get Stock realme UI dialer and contact apk by changing firmware in Realme 8 Pro Device.
https://forum.xda-developers.com/t/...to-philipines-in-realme-8-pro-device.4483957/

How To Guide [CLOSED] Convert your Moto x30 Pro (CN) to Edge 30 Ultra (EU)

FIRST OFF: If you have not bought the phone yet and plan on getting it: DON'T. The camera is broken and Motorola refuses to communicate with their customers. Is a fix coming? I someone working on it? Who knows. The phone is also still on Android 12. DO NOT BUY MOTOROLA PHONES.​
Join our Telegram Group at {Mod edit: Link removed! Oswald Boelcke, Senior Moderator}
The guide and all infos are always {Mod edit: Link removed! Oswald Boelcke, Senior Moderator}.​

Global Firmware:
- EQS_G_S3SQ32.16-16-22 (Brazilian)
- EQS_G_S3SQ32.16_16_28 (Thanks to @onken)
Where to find Firmware:
- Lolinet
- Rescue and Smart Assistant (only for your original device)
It would be great if some Edge 30 Ultra buyers could download the global firmware through the Rescue and Smart Assistant and share a zip.
Tools:
- Universal Mount System RW (Guide)
-> Fix for Android 12
- Universal Safetynet Fix Magisk Module
How to Update:
If you don't get OTA updates simply follow these steps. You need a PC with working global ADB and fastboot.
01. Download the latest Firmware from lolinet
02. Extract it, open servicefile.xml and copy the contents into this website
03. Reboot your phone into fastboot (adb reboot fastboot or press and hold Power + Volume Down)
04. Open a CMD window in the extracted folder, paste the commands from the website and hit enter
05. Don't disconnect the phone until the update has finished.
It might be possible to upgrade by putting the firmware zip into the root of your phone, booting into recovery and selecting install firmware from zip. I didnt test this yet.

Thanks for instructions
Please tell me, chinese version not have other configurations modem ? = not carrier agregations all bands LTE or i think not have all bands, in 99% not have B20 and i think other.
This same situations - similar, OnePlus 10r or chinese OnePlus ACE

According to my seller the phone has the following bands:
B1, B3, B7, B8, B20, B32, N1, N3, N28, N78
No support for:
B28, B38
No issues here in germany, dont have 5g (not in my plan) but I get good Band 20 reception.

Ok, if have B20 its ok
I have yet one question about relock bootlader
If i have XT2241-2 - relock bootlader is safe ?
I ask because i eralier bricked Motoroa G82 after lock bootlader again...
Maybe problem is i not earlier delete magisk ( root ) but i not sure about in 100% forget delete this magisk...

No, dont ever relock the bootloader. If you skip through the official Motorola forums you will find a lot of people with bricked devices EVEN AFTER flashing their original firmware via the rescue assistant.
I would not under any circumstance relock the bootloader - it is really a dangerous game even if you have not modified anything.

Thanks @Killuminati91 great guide,

Thanks for the great guide, will the NFC work after the conversion?

NFC ist toggleable but I have nothing to test it with.

Killuminati91 said:
Use the command "fastboot oem config carrier reteu" to set your update channel to reteu (Which is EU).
Click to expand...
Click to collapse
Did you manage to change the Software Channel to RETEU?
I probably wouldn't be wrong to say that it's impossible to change the RETCN channel to RETEU...

ilia3367 said:
Did you manage to change the Software Channel to RETEU?
I probably wouldn't be wrong to say that it's impossible to change the RETCN channel to RETEU...
Click to expand...
Click to collapse
Yes. At least it shows RETEU in settings and you get an OTA if you flash 16-16-22. We will see about future updates.

Amazing! On any Motorola device before it was impossible to change the Chinese software update channel to RETAIL, RETEU and the like.
It may be because your device has the RETCN channel. But this is unlikely. I've never seen that before, and I've been doing Moto firmware for 10 years. Not professionally of course, but still I have some idea.

Hey everyone. I have the x30 pro cn version. Is there a benefit to flash it with the global rom? I live in Canada, everything works fine. 5G works with no problem. Some apps are crashing but no major issues.
Tx in advanced

I don't like it after convert to the international version, what should I do if I want to return to the Chinese version，ask for a tutorial ，thanks a lot

rfreiha said:
Hey everyone. I have the x30 pro cn version. Is there a benefit to flash it with the global rom? I live in Canada, everything works fine. 5G works with no problem. Some apps are crashing but no major issues.
Tx in advanced
Click to expand...
Click to collapse
Working Android auto, contact sync and assisstant out of the box. A slightly different UI and less bloat but that's basically it. Oh and of course more language options.
@diewellen : you just have to repeat the guide with a Chinese ROM. Search for xt2241-1 firmware on Google. If you can't find it I'll upload my copy later.

Killuminati91 said:
Working Android auto, contact sync and assisstant out of the box. A slightly different UI and less bloat but that's basically it. Oh and of course more language options.
@diewellen : you just have to repeat the guide with a Chinese ROM. Search for xt2241-1 firmware on Google. If you can't find it I'll upload my copy later.
Click to expand...
Click to collapse
Thanks for the info. Appreciate it.
One more question. My software version is 16-16-15. Is there an updated version for the CN firmware? Will ota work? Or I have to update manually?

Thanks for a great guide! I have just succeeded in converting my CN to EU/Global. But now I can't use Google Pay, because "the phone has been rooted or tampered with". Is it because of the unlocked bootlocker? The Global rom from the thread is not rooted? What to do?
Thanks for any help
Update: it looks like it could be a problem with "CTS profile match" failing?

After converting ,the widevine is L1 or L3?

Always L3 only and not working Netflix ( and maybe more )

Killuminati91 said:
Global Firmware:
- EQS_G_S3SQ32.16-16-22 (Brazilian)
- EQS_G_S3SQ32.16_16_28 (Thanks to @onken)
Where to find Firmware:
- Lolinet (not yet)
- Rescue and Smart Assistant (only for your original device)
It would be great if some Edge 30 Ultra buyers could download the global firmware through the Rescue and Smart Assistant and share a zip.
Tools:
- Universal Mount System RW (Guide)
-> Fix for Android 12
- Universal Safetynet Fix Ma
Click to expand...
Click to collapse
Decide what firmware region you need yourself.
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com