Has anybody found a glass screen protector (without black edges, full transparent) that fits from side to side?
All that I tried are too small, a good 2mm is left between the glass and supplied silicone case. I even tried protectors for other phones - found none that are big enough.
Related
I just did the whole proccess.
The whole thing doesn't cover the active screen fully. There is a thin uncovered part on the edges.
All around the protector I have a "lifted" frame that doesn't even touch the screen. Dirt and fiber will probably get stuck in there over time...
Also the camera glass protector is made out of a pretty non-smooth glass.. I can't even clean it with a cloth without leaving residue behind.
IS IT JUST ME?
Why is it so low quality??
I have one and the actual screen part is fully covered. Also, My protector is ever so slight;y lifted but not much. My camera protector is good as well.
I bought mine on ebay for under $10. Maybe they have quality control issues?
I have bought also Nillkin 9H protector and it fits as it should because it is made so it covers only the flat part of the screen.
Edges of the screen are rounded as you have noticed and protector can not fit on top of them , I know this because I had protector that was covering whole screen and it was not good believe me.
Full coverage screen protectors are not good for two reasons:
1. beneath the protector where are the edges dust collects and because there is very small gap you can not clean it. (looks horrible)
2. because protector is not in contact with rounded edges of the screen it will crack in 99% when it falls. (This is based on my personal experience)
So do not worry you'll get used to it and appreciate the benefits.
Can somebody please take a picture of how much gap there is to the edge of the screen for Nillkin? I have a noname screen 9H protector and considering switching to Nillkin if it has less edge gap.
Hi,
for those people who have the problem of the case lifting the edges of the screen protector : I bought this 2.5D glass screen protector
It's by Vikoo in case the link above doesn't lead you to it
When I first applied it I wasn't too happy since it seems way too small, two milimeters uncovered screen on every side. But this is perfect when you also use the stock bendable plastic case. For me this is a perfect combo.
Useful, thanks. I get the problem with the screen protector being lifted.
R.
DaisyF said:
Hi,
for those people who have the problem of the case lifting the edges of the screen protector : I bought this 2.5D glass screen protector
Click to expand...
Click to collapse
I also bought this : http://www.ebay.co.uk/itm/100-Tempe...m-for-Elephone-P9000-P9000-Lite-/222172703618
which is as described above slightly smaller
Okay so I ordered some tempered glass through Aliexpress. I got it and it has the black trim around it which is fine. However unlike all my other tempered glass purchases in the past (none had painted trim before) this only had adhesive on the colored areas and the the main area over the display had no adhesive. Is this the way of all the full coverage glass that has painted trim around the edges of the screen protector?
I uploaded a picture of a similar style, not the exact one I purchased but this one shows the style better.
Is there a full screen protector with adhesive over the whole back surface and not just around the edges?
So I guess no one has found a full screen tempered glass protector with the back having adhesive on the entire surface and not just around the edge? This is for the 4X variant.
Sadly not. I'm having a lot of trouble finding a screen protector for these phones that isn't terrible...
I have this mocolo glass but the problem is that the touch sensibility is terrible. Do you know how to increase screen sensibility?
Sent from my MI 5 using Tapatalk
Most tempered glass screen protectors come with an install frame. Can i still use the clear case or will the frame get in the way?
I have a lg v20 atm and if i use a tempered glass screen protector i will sometimes get oil like stains on it. Does the same problem exist with the note 9? I will most likely get a normal 13€ screen protector from amazon.de and just hope that the s pen will still work, that i can still use a case with it and that there wont be any annoying oil like stains
Personally I haven't had any compatibility issues between cases and cheaper screen protectors, since most of them don't cover the screen edge-to-edge. What will likely happen with the cheaper ones is the rainbow effect resembling an oil stain which you mentioned - this happens because underneath most screen protectors is a microscopic dot matrix keeping the glass slightly elevated from the display surface, with glue only on the edges of the protector. To avoid this, what you want is a screen protector that utilizes a full glue structure; in short, a glass protector whose entire surface area is adhered to the display. These are sold less and less, because generally they're very tricky to install on curved glass. You might want to consider products like the Whitestone Dome, which uses liquid UV glue.
You don't need to worry about the S pen - Unless your new screen protector is made of metal, it will work with every film or glass sheet out there.
I've got a Whitestone Dome protector fitted to my NOTE9 and I'm using the Samsung clear case that came with my phone.
No issues at all, the Samsung clear case and Whitestone Dome protector do not interfere with each other.
Just confirming... are you referring to the Samsung Note9 S-View Cover?
If so, most screen protectors shouldn't interfere with the case. The frame you referenced is generally for installing the protector, then it's removed.
I use an S-View Cover. I like it in general, but two things:
1) Anticipate that the cover won't set flat for a while (if ever): Some have used a hairdryer or heatgun along the rib to get it to relax. That helped mine a bit.
2) It scratches easily! If I had a do-over, I'd try to find a protective film to cover it
I've got a Whitestone glass screen protector and the Samsung case has no problems, also have an Otterbox Symmetry case and no problem with that one either. Like was said most glass screen protectors don't go right to the edge so most case should have no trouble.
What tempered glass is everyone using for the V60? I don't use the Dual Screen, so I just need it to cover the phone screen.
Dmax glass was the thinnest glass screen protector I have ever seen for any phone I've put glass on ever.
Came in a pack of two. I chipped and cracked the edge of one with my fingernail simply taking the film off to install it. The second cracked in a couple days later from setting the phone down too hard I guess.
LK glass had poor adhesion. Large air bubbles on the edges of the screen. Bad enough I took it off after a month to try a diffrent brand. Noticed the sticky part of the glass felt subpar after uninstall.
Now using Zagg glass and its okay. Doable for now. However a thin ring shaped air bubble is present on the Zagg around the edges of the screen. It's thin and even, and can't be seen when the screen is on. When off it looks like its gonna start peeling up at the edges.
The issue I had with glass is that its too thick to close the cover if you have one on the phone and one on the sexind screen
AmFilm is what I put on the phone today. Came in a pack of three. Probably the best protector I've tried yet.
Thicker glass, might be a true 0.3mm. No bubbles or rings near the edges. Sticks very well, good adhesive.
Touch is good and looks are good with the screen off or on.
However, AmFilm is slightly (1mm?) shorter and narrower than the Zagg glass.
The Zagg glass was 0.26-0.23mm thick and covered more screen surface. The Zagg covers more screen surface than LK, DMax, or AmFilm.
However, the Zagg never adhered to the screen edges completely resulting in a white ring air pocket along the outer edges of the protector.
The Zagg glass was stuck to the screen very well when I removed it. The outer air pocket never did grow in size, was very narrow, just annoyed me to look at when the screen was off.
Overall the Zagg was a good option, but maybe not for those like me that value good looks as highly as I do.
The DMax Armor glass I tried was so thin, it might be an option for the dual screen case. DMax could have been 0.15mm thick possibly. Really similar to the Baseus ultra thin glass.
It's very fragile stuff as noted above, but again DMax might be as thick as double overlapped film protectors.
For those looking at a good protector here is the link for what I am using. Installs with ease, no bubbles and halos.
https://www.amazon.com/Janmitta-Pro...68?ie=UTF8&psc=1&ref=ppx_pop_mob_b_asin_title