Redmi Note11 5G version TWRP3.6.0 automatic ballast is released on December 23, 2021:
This case is the deep structure of MediaTek 11 V-AB. It does not support temporary startup appearance, which is very special!
Support automatic data (numbers and characters)
Support MTP ADB Fastbootd touch, etc.
Support mounting logic (system, vendor, product) for reading and writing
Add the official ROM function of compulsory flashing Payload format
One-click ROOT device is added to the advanced options, and the built-in mask version is AlphaMagisk;
twrp is made with the official V125.4 stable kernel. Many kernels are not versions due to system reasons. Please enter twrp and use the one-click install TWRP function in the advanced section to install twrp to the phone, and then perform other operations
Pay special attention: This operation is to refresh the kernel with another boot slot and the memory disk of the current twrp to the currently active boot partition. If the kernel version of the two slots is currently booted, it is possible to start the phone after the wifi opens. Non-opening phenomenon;
When this phenomenon occurs, the advanced fastboot uses the command to flash the official boot of the same version: fastboot flash boot_ab boot.img extracted from the official package
Download attached. Password is cane4e11ebf54d039a78938483cbb.
紅米Note11 5G版TWRP3.6.0自動芭2021.12.23發布：
此案例為聯發科深層結構11 V-AB 深層結構，不支持臨時啟動外觀，很特殊！
支持自動數據（數字和人物）
支持MTP ADB Fastbootd觸摸等
支持掛載邏輯（system、vendor、product）為讀寫
加入強制刷Payload格式官方ROM功能
高級選項中加入一鍵ROOT設備，內置的面具版本為AlphaMagisk；
twrp採用官方V125.4穩定版內核製作，由於系統原因的內核很多都不是版本，所有請進入twrp先用高級裡面的一鍵安裝TWRP功能執行安裝twrp到手機，再執行其他操作
特別注意下：此操作是將採用另外一個啟動槽位的內核和當前的twrp的內存磁盤刷新到當前活動的啟動分區，如果當前啟動兩個槽位的內核版本，則再可能啟動手機後wifi打不開等現象；
出現這種現象，先進的fastboot 使用命令刷若同版本的官方boot：fastboot flash boot_ab 從官方包裡面提取的boot.img
下载附件。 密码是 cane4e11ebf54d039a78938483cbb。
friend is cool, but what's the password?
Viên Lương said:
Redmi Note11 5G version TWRP3.6.0 automatic ballast is released on December 23, 2021:
This case is the deep structure of MediaTek 11 V-AB. It does not support temporary startup appearance, which is very special!
Support automatic data (numbers and characters)
Support MTP ADB Fastbootd touch, etc.
Support mounting logic (system, vendor, product) for reading and writing
Add the official ROM function of compulsory flashing Payload format
One-click ROOT device is added to the advanced options, and the built-in mask version is AlphaMagisk;
twrp is made with the official V125.4 stable kernel. Many kernels are not versions due to system reasons. Please enter twrp and use the one-click install TWRP function in the advanced section to install twrp to the phone, and then perform other operations
Pay special attention: This operation is to refresh the kernel with another boot slot and the memory disk of the current twrp to the currently active boot partition. If the kernel version of the two slots is currently booted, it is possible to start the phone after the wifi opens. Non-opening phenomenon;
When this phenomenon occurs, the advanced fastboot uses the command to flash the official boot of the same version: fastboot flash boot_ab boot.img extracted from the official package
Download link: https://drive.google.com/folderview?id=11TWaLXr5vRfHMGMPCcewnAwuKHhxB4GJ
紅米Note11 5G版TWRP3.6.0自動芭2021.12.23發布：
此案例為聯發科深層結構11 V-AB 深層結構，不支持臨時啟動外觀，很特殊！
支持自動數據（數字和人物）
支持MTP ADB Fastbootd觸摸等
支持掛載邏輯（system、vendor、product）為讀寫
加入強制刷Payload格式官方ROM功能
高級選項中加入一鍵ROOT設備，內置的面具版本為AlphaMagisk；
twrp採用官方V125.4穩定版內核製作，由於系統原因的內核很多都不是版本，所有請進入twrp先用高級裡面的一鍵安裝TWRP功能執行安裝twrp到手機，再執行其他操作
特別注意下：此操作是將採用另外一個啟動槽位的內核和當前的twrp的內存磁盤刷新到當前活動的啟動分區，如果當前啟動兩個槽位的內核版本，則再可能啟動手機後wifi打不開等現象；
出現這種現象，先進的fastboot 使用命令刷若同版本的官方boot：fastboot flash boot_ab 從官方包裡面提取的boot.img
下载地址：https://drive.google.com/folderview?id=11TWaLXr5vRfHMGMPCcewnAwuKHhxB4GJ
Click to expand...
Click to collapse
и как открыть архив, вам нужен пароль
----------
MOD EDIT: English Translation Below
and how to open the archive, you need a password
Dear friends English translation is quite poor.. is TWRP eng or chinese? Are there special instructions to install it via adb/fastboot platform tools. Thanks a lot in advance
невозможно принять во внимание poco m4 pro 5g
----------
MOD EDIT: English Translation Below
impossible to take into account poco m4 pro 5g
fas82 said:
невозможно принять во внимание poco m4 pro 5g
----------
MOD EDIT: English Translation Below
impossible to take into account poco m4 pro 5g
Click to expand...
Click to collapse
U mean, u don't like it?
esclusoilcane said:
U mean, u don't like it?
Click to expand...
Click to collapse
не удалось установить этот twrp на poco m4 pro
----------
MOD EDIT: English Translation Below
failed to install this twrp on poco m4 pro
Aaaah ok so u say this TWRP is not for poco M4 pro 5g, so we still don't have a TWRP. Sorry but Google translator is not so good and this site is supposed to be in English
how abt on note 11 5g china version?
thaw26 said:
how abt on note 11 5g china version?
Click to expand...
Click to collapse
I used the method to install TWRP sucessed.
https://forum.xda-developers.com/t/closed-redmi-note11-5g-version-twrp3-6-0.4380631/
For the TWRP image of this method is based on evergo_images_V12.5.4.0.RGBCNXM_20211108.0000.00_11.0_cn.
So , I use miflash to this stable version.
Using the tools 残芯专用TWRPRecovery刷入工具Win版V2.1.exe in the link .
Flash the 红米Note11_5G版-twrp3.6.0-11_0-recovery-V12.5.4-自动解密-21.12.23-残芯工具刷入到boot分区 .img to the boot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then reboot .
madagascar.zebra said:
the tools 残芯专用TWRPRecovery刷入工具Win版V2.1.exe
Click to expand...
Click to collapse
the link is blocked.can u send another link?
(may lanzoul server?)
thanks a lot.
这个链接掉了，能发个蓝奏云链接吗？非常感谢！
Related
TWRP PRO For Samsung Galaxy Grand Prime
October 25, 2017
TWRP PRO is here for Fortunaxxx By Me
This TWRP I have modified and opened all the features that do not exist
this is Project TWRP Pro, which I've loved from the first twrp is able to [format / backup / restore] all the partitions in emmc G530H, Twrp is reading the .pit file on a device and running the user command
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CHANGELOG for 3.2.0-1
#Unlock Feature | Backup/Restore/Format Partition
Code:
-IMEI 1
IMEI 2
EFS
APNnohls
RPM
MODEM
HIDDEN
QSEE
QHEE
PERSDATA
USB OTG
PRELOAD and more
#Unlock | Unmount/mount Read/Write partition
Code:
-
EFS
HIDDEN
APNNOHLS
PERSDATA
PRELOAD and more
-Theme Support
Support repair partiton and emmC
and more Boss
Bug?
Tell me
INSTAL GUIDE
- .tar instal with odin
- .img instal with Rash.apk or Instal with Twrp and select instal image
Devices compatible with TWRP PRO
-Fortuna3G | Fortunave3G | F | FZ and more
100% I tested Salam Oprek Boss Kuh....
DOWNLOAD
TWRP v3.2.0-1 Fortunaxxx : DOWNLOAD
12-29 TWRP PRO v3.2.1-1 XCU/XXU/FZ : HERE
For FZ+support aroma
Thanks
-ALLAH SWT
-TeamWin
If all this works please click thanks button :good:
PASSWORLD For OLD version v3.2.0-1
[email protected]
Screenshot
XDA:DevDB Information
[UNOFFICIAL][Recovery] TWRP 3xx PRO For G530H/FZ, Tool/Utility for the Samsung Galaxy Grand Prime
Contributors
RioFebrian, fakedevs
Version Information
Status: Stable
Current Stable Version: 3.2.1-1
Stable Release Date: 2017-10-25
Created 2017-11-03
Last Updated 2018-01-17
Download.link ?
kotbey said:
Download.link ?
Click to expand...
Click to collapse
https://drive.google.com/drive/folders/0BwzYvYaQMDZvMmpfN3FrMlMta2s
What is zip password for TwrpPRO-3.2.0-1-fortunaxx.zip ?
I am in stock ROM based KitKat 4.4.4, will it work for me?
yes zip password plz
Ngadhnjim said:
yes zip password plz
Click to expand...
Click to collapse
pasworld : [email protected]
please I have two questions: one, is it OK in the FZ or does it have an error? and if it works with lineages 14.1? Thank you.
I can not answer but I do not understand what you say
RioFebrian said:
yup no bug om
Click to expand...
Click to collapse
sorry but I do not understand
RioFebrian said:
yup no bug om
Click to expand...
Click to collapse
I use Google translator and what I mean is that I do not speak English
And installed this twrp in my FZ and I have not found anything of PRO is the same as the one of vincen with the same options
terima kasih
Does it support aroma in xxu??
Nikolaevich said:
Does it support aroma in xxu??
Click to expand...
Click to collapse
Yes support
Could you please upgrade to version 3.2.2.0?
Tried flashing Lineage os 15.1 on fortuna 3g XXU with this TWRP and have an error some thing like : "Error 4 this zip file is for fortuna3g, fortunave3g , but your device is . ". The Lineage os 15.1 flashes perfectly with other TWRP. Any ideas what the problem is ?
cphilch said:
Tried flashing Lineage os 15.1 on fortuna 3g XXU with this TWRP and have an error some thing like : "Error 4 this zip file is for fortuna3g, fortunave3g , but your device is . ". The Lineage os 15.1 flashes perfectly with other TWRP. Any ideas what the problem is ?
Click to expand...
Click to collapse
Why do you wanna use this TWRP,
You can use Latest TWRP from Vince or Official TWRP repository
itexpert.120 said:
Why do you wanna use this TWRP,
You can use Latest TWRP from Vince or Official TWRP repository
Click to expand...
Click to collapse
Thank you for responding. I am using Vinces 3.2.1 but dont see the efs, imei partitions for backup. It only shows Dalvik/Art, System, Boot & Recovery. I may be wrong about vinces latest versions , do they show efs and imei paritions and also frankly I have not tried the latest that comes with his rom, do they detect sd card without issues because, one of his earlier versions had sd card issues and then I downliaded this version of vince 3.2.1 which I use currently as it is always safe for me.
cphilch said:
Thank you for responding. I am using Vinces 3.2.1 but dont see the efs, imei partitions for backup. It only shows Dalvik/Art, System, Boot & Recovery. I may be wrong about vinces latest versions , do they show efs and imei paritions and also frankly I have not tried the latest that comes with his rom, do they detect sd card without issues because, one of his earlier versions had sd card issues and then I downliaded this version of vince 3.2.1 which I use currently as it is always safe for me.
Click to expand...
Click to collapse
It's now fixed, however you can use the latest official recovery
itexpert.120 said:
It's now fixed, however you can use the latest official recovery
Click to expand...
Click to collapse
Yes I am using vinces twrp only. Do you know if the vinces latest twrp has support for imei and efs partition backup
---------- Post added at 01:13 PM ---------- Previous post was at 12:52 PM ----------
cphilch said:
Yes I am using vinces twrp only. Do you know if the vinces latest twrp has support for imei and efs partition backup
Click to expand...
Click to collapse
Nevermind..iam installing latest 3.2.3 today to check out.
Good day XDA users.
These days I'm try to understand Mi A1 system partitions, and it's quite difficult and new for me.
My main goal is to get MIUI working on my Mi A1 phone.
I was able to save leaked Oreo ROM to system sparse format, also I prepare an easy tool for flashing that Oreo ROM via fastboot scripts.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM Version:
OPR1.170623.026.8.2.8 Beta
Instructions to install Oreo ROM under unlocked bootloader:
-Install adb drivers for Mi A1
-Unpack MiA1-Tool-Flasher-Oreo.7z tool
-Reboot your Mi A1 on fastboot mode (Hold Vol - & Power)
-Execute Rom-Flasher.bat
-Select one of 3 flashing options (option 2 for avoid conflicts, data will be erased)
-Enjoy Oreo ROM
Disclaimer: do at your own risk, it could erase your data files. Make a backup first
Advantages of use this tool/ROM:
-No need TWRP
-No need to lost your data
-Just reboot on fastboot mode and enjoy
-You can re-lock your bootloader
Changelog OPR1.170623.026.8.1.10 Modded:
1# Debloated
2# Power Menu
3# Touch status bar clock to lock the screen or see Power Menu
4# All system applications updated to latest version
5# Build.prop Tweaks
6# Added MIUI main applications like Mi Remote, Mi File Explorer and Music
7# Root with Magisk
8# TWRP In-built
Download:
8.2.1 - OPR1.170623.026 new Oreo beta:
https://www.androidfilehost.com/?fid=889964283620778036
Changelog OPR1.170623.026.8.2.1:
1# February 2018 android security patch
Bugs:
-Camera is slow again, please root and use SELinuxModeChanger
-Download apk here: View attachment com.mrbimc.selinux_20171031.apk
Downloads:
8.2.8 - OPR1.170623.026 new Oreo beta TWRP zip:
http://www.mediafire.com/file/y0q2f72h9m26xhb/A-One_tissot_8.2.8_v8.0_beta.zip
8.2.6 - OPR1.170623.026 new Oreo beta:
http://www.mediafire.com/file/qy0269twz5emmbm/Mi-A1-OPR1.170623.026.8.2.6-beta.7z
8.2.1 - OPR1.170623.026 new Oreo beta:
https://www.androidfilehost.com/?fid=962187416754458083
8.1.10 - OPR1.170623.026 Modded new Oreo beta Modded:
https://www.androidfilehost.com/?fid=889964283620778036
8.1.10 - OPR1.170623.026 new Oreo beta:
https://www.androidfilehost.com/?fid=889964283620777529
7.12.29 - OPR1.170623.026 new Oreo stable V2:
https://www.androidfilehost.com/?fid=745849072291700464
7.12.27 - OPR1.170623.026]:
https://www.androidfilehost.com/?fid=673791459329069648
3 kernel options to choose from for 7.12.27 version:
https://www.androidfilehost.com/?fid=673791459329069652
7.12.22 - OPR1.170623.026:
https://www.androidfilehost.com/?fid=745849072291696926
3 kernel options to choose from for 7.12.22 version:
https://www.androidfilehost.com/?fid=962021903579500640
7.12.20 - OPR1.170623.026:
https://www.androidfilehost.com/?fid=745849072291696129
Patched boot.img with root and TWRP in built for 7.12.20 version:
https://www.androidfilehost.com/?fid=889964283620773632
7.12.8 version, first Oreo release:
https://www.androidfilehost.com/?fid=817906626617953758
Credits:
Xiaomi
Google
Last version date:
Feb 8 - 2018
Reserved
JamFlux said:
Reserved
Click to expand...
Click to collapse
Hi,
It's possible to flash with FlashFire?
We7dy said:
Hi,
It's possible to flash with FlashFire?
Click to expand...
Click to collapse
Hi.
May be, but you have to unpack system.img and boot.img from .7z tool.
thnks.........
Where is the download link it's not working
Edit-link is working now . Will I have to unlock and root the previous OS . Please tell me in detail. Thanks for your hard work.
dipakd said:
Where is the download link it's not working
Click to expand...
Click to collapse
Use this:
http://qc4.androidfilehost.com/dl/9.../817906626617953758/MiA1-Tool-Flasher-Oreo.7z
Will I be able to get ota?
dipakd said:
Will I be able to get ota?
Click to expand...
Click to collapse
No idea cause Oreo OTA is for beta testers members.
Is This rom is the latest oreo update ?
EPIC Share bro, nice to see you with MIA1, hope in near future we will be able to run Epic rom in our MIA1
talk2indrajit said:
EPIC Share bro, nice to see you with MIA1, hope in near future we will be able to run Epic rom in our MIA1
Click to expand...
Click to collapse
Yeah, I would like MIUI.
I'm analizing how to proceed...
ariefabuzaky said:
Is This rom is the latest oreo update ?
Click to expand...
Click to collapse
Nope. This is repack of leaked backup. So this is one of the first builds.
Displax said:
Nope. This is repack of leaked backup. So this is one of the first builds.
Click to expand...
Click to collapse
Yeah, you right.
This ROM had magisk root removed too.
JamFlux said:
Yeah, I would like MIUI.
I'm analizing how to proceed...
Click to expand...
Click to collapse
I'm really super excited bro :fingers-crossed: today I came to realize that I made a right choice to have a MIA1 after looking you here :fingers-crossed: I know you can find the way to bring MIUI 9 for us soon :fingers-crossed: :good::good::good:
unable to flash
Unable to flash. The massage is "target reported max download size of 536870912."
And I am unable to select 1 & 3 option. Only I could slect 2 no option. What may be problem?
its working i flash it with mi flash tool but it was prerooted and from rom-flasher.bat is not working
dipakd said:
Unable to flash. The massage is "target reported max download size of 536870912."
And I am unable to select 1 & 3 option. Only I could slect 2 no option. What may be problem?
Click to expand...
Click to collapse
Hi.
Make sure you have adb drivers installed for fastboot mode: https://forum.xda-developers.com/showthread.php?t=2588979
Bro @JamFlux im sharing my noob knowledge on mi a1 partiton system.
Bro our mi a1 have skip_initfs on kernel side.
Ab partiton use initfs or ramdisk from system partition intead of boot.img the boot.img ramdisk is only there for recovery only and whole root fs is changed on mia1
And selinux policy also devide into various location on system and boot.img. bro u can see chainfire and topjohn theory how they root ab partiton device they expailed every thing on thier thread "they expailed in pixel thread"
Mi 5x dev able to boot our whole system image and boot.img only changes with ramdisk.
U are the creator of epic miui.
I can wait to see miui on our mia1 now u are looking on our mia1 soo im very happy to see u here to develop for our mia1.
After installing ADB drivers still I am not able to flash Oreo. What should I do now. Same massage is there.
---------- Post added at 03:17 AM ---------- Previous post was at 03:13 AM ----------
Sahil132 said:
its working i flash it with mi flash tool but it was prerooted and from rom-flasher.bat is not working
Click to expand...
Click to collapse
How did you do that can you please explain me?
Xperia 5 for OnePlus 6!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
Stock Xperia 5 Firmware
Debloated
Automated Flasher
Custom Kernel Support
Full GCam 7 Support
Decrypted
Performance tweaks
Dolby Atmos!
Xperia AOD!
Xperia Loops!
Game Enhancer!
3D Creator with Face Animation!
Side Sense!
What works:
Almost everything, check bugs!
What doesn't work / Bugs:
Framework bugs (Auto Rotation, Night Light etc)
Brightness is same as in Pixel Port so use built in JRC app for 100%
DT2W Fix:
Flash a custom kernel & run this command:
adb shell echo 1 > /proc/touchpanel/double_tap_enable
How to Install:
Make sure You're on Open Beta 8 Pie
Note: Backup Your nudes before flashing the ROM!
Boot TWRP
Flash OB8 OTA.zip
Format data/Wipe data (if decrypted)
Reboot to fastboot
Run flasher.bat
Wait for flasher to reboot automatically
Enjoy!
You can root after going through SetupWizard!
Download:
Xperia5 for OnePlus6 - October 4
Warning! DO NOT flash Xperia OTA's! They may brick Your phone! If You end up flashing one anyway, just use EDL mode or fastboot to go back to stock firmware.
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join my group!
If You'd like to support this and my other projects, You can donate
https://www.paypal.me/protodevnano
Credits:
Guzram for partial RIL fix and support and help!
erfanoabdi for vendor patcher idea.
FunkWizard/OnePlus for latest firmwares!
OnePlus for creating OP6!
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!
XDA:DevDB Information
[ROM][PORT][9.0.0] Xperia 5 [04.10.19], ROM for the OnePlus 6
Contributors
ProtoDeVNan0
Source Code: https://github.com/OnePlusOSS/android_kernel_oneplus_sdm845/tree/oneplus/SDM845_P_9.0_Beta
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: OxygenOS Open Beta 8
Based On: Xperia
Version Information
Status: Stable
Created 2019-10-04
Last Updated 2019-10-04
I've used many phones (Galaxy Nexus, Galaxy S2, Galaxy Note 3, Mi Note 3,Mi A1... and many mores) and I've never been spoiled with so many ROMs like I have been with this phone and this incredible developer
You're doing God's work my man!
İncredible !!
Wow, wasn't expecting this at all. Reminds me of the good old XOSP, nice !
Thanks!
What custom kernel do you suggest to use this with? Is anything okay?
Thanks a lot
Coming from an Xperia fanboy - this is great!
Excitement
October security?
Looks great!!. Face unlock?
Thanks a lot for the ROM.
Unfortunately the framework bug is a big no-go for me, if it wouldn't be, it would definitely be my daily driver.
Looks Great!
Gonna try it out.
MDomokos said:
Looks Great!
Gonna try it out.
Click to expand...
Click to collapse
Wasn't able to get it to boot.
I used the MSM tool to go back to Oreo, updated to Open Beta 8, and then installed the Xperia Firmware. But I ended up in Qualcomm Crash Dump Mode both times I tried.
Do u Flash OB8 OTA.zip in both slot?
Author said that it's a MUST!
after flash it, wipe data and do the .bat flashing, good luck!
MDomokos said:
Wasn't able to get it to boot.
I used the MSM tool to go back to Oreo, updated to Open Beta 8, and then installed the Xperia Firmware. But I ended up in Qualcomm Crash Dump Mode both times I tried.
Click to expand...
Click to collapse
I just wonder why this ROM needs OB8 as Base which is quite old if I am not wrong or??
Which security Patch level has this Xperia 5 Port?
Invalid sparse file format at header magic. What's this, and why is it happening?
sky104hk said:
Do u Flash OB8 OTA.zip in both slot?
Author said that it's a MUST!
after flash it, wipe data and do the .bat flashing, good luck!
Click to expand...
Click to collapse
Thanks, got it to boot.
Here's what I did:
-Format data
-Flash OB 8 + TWRP
-Reboot recovery
-Flash OB 8 + TWRP
-Reboot Recovery
-Format data
-Boot to Fastboot Mode
-Flash .bat
I got stuck on setup wizard as it froze the phone. Then I modified build.prop to skip it, but now the phone keeps freezing and re starting.
Can someone give me the link to the Google Camera 7 that works on this system? I can't find it.
MDomokos said:
Thanks, got it to boot.
Here's what I did:
-Format data
-Flash OB 8 + TWRP
-Reboot recovery
-Flash OB 8 + TWRP
-Reboot Recovery
-Format data
-Boot to Fastboot Mode
-Flash .bat
I got stuck on setup wizard as it froze the phone. Then I modified build.prop to skip it, but now the phone keeps freezing and re starting.
Click to expand...
Click to collapse
After flashing u can go back to TWRP and wipe data, install MAGISK and see
or u can flash custom kernel to see if solve the auto reboots and freeze
sky104hk said:
After flashing u can go back to TWRP and wipe data, install MAGISK and see
or u can flash custom kernel to see if solve the auto reboots and freeze
Click to expand...
Click to collapse
Thanks, I'll try it when I have some time.
Just to make sure, I should go into TWRP after the first boot of the Xperia Firmware. Then wipe data, not format data, then flash Magisk and later kernel if still not working?
MDomokos said:
Thanks, I'll try it when I have some time.
Just to make sure, I should go into TWRP after the first boot of the Xperia Firmware. Then wipe data, not format data, then flash Magisk and later kernel if still not working?
Click to expand...
Click to collapse
Yes exactly and Wipe data not Format.
Guess I will give that ROM a try as well.
So, here is a little script, which I modified to work on Redmi Note 10 Pro (tested and working on sweet). I didn't create this, only modified it, so all credits goes to ghostrider_reborn.
Edit:
found another working encryption disabler (rmcrypt.zip), working out of the box, so no edit by me, main difference is better error handling - all credits goes to [email protected]
Edit2:
just to have all bases covered, and all info on one place, I attached encryption disabler script for OSS vendor based ROMs, originally created for POCO X3 NFC, but working as well on sweet, created by ghostrider_reborn, so all credits belongs to him...
DISCLAIMER: You know the drill - You are responsible for your own actions - if you choose to use this script on your phone - I am not responsible for any damage that may occurs while (or after) using this script - it works on my device, but I can't guarantee it will work on yours. Also removing encryption off your /data partition may have unforeseen consequences - for you, your data, your phone - this is a serious modifications of your phone - do it only if you know what you are doing - AT YOUR OWN RISK!
Requirements: unlocked bootloader, flashed custom recovery (OFOX, TWRP), flashed prebuilt MIUI vendor or OSS vendor
Installation: flash attached file in custom recovery
First use:
- flash attached file in custom recovery as the last thing before you reboot recovery (for example flash custom ROM, flash GAPPS, MAGISK and then as the last thing this script)
- mandatory! - do a FORMAT DATA confirmed by YES - this is one time only and needed to remove encryption from internal storage (/data partition) - WARNING! - FORMAT DATA will destroy all content on your internal storage - do a backup before you do so!
Usage:
- flash attached file in custom recovery as the last thing before you reboot recovery EVERY time you flashed a new custom ROM, flashed OTA of your installed custom ROM...
- - if you forget to do that, on the next boot to system your internal storage WILL BE ENCRYPTED!
Tested on:
Redmi Note 10 Pro (sweet) + custom ROMs
Not tested/supported :
MIUI itself
Credits:
encryption-disabler-sweet.zip: ghostrider_reborn
Disable_Dm-Verity_ForceEncrypt_20210320.zip: ghostrider_reborn
rmcrypt.zip: [email protected]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
˅˅˅ Important: for OSS vendor based ROMs use Disable_Dm-Verity_ForceEncrypt_20210320.zip ˅˅˅
Good work...I will try
Thank you for the post/modiciation and the original developer too for his work!
So when i want to change rom, I don't need to do a format data over and over again right?
*On my previous device (ginkgo) when i flashed a custom rom, I don't need to do a format data, i just need to flash this Disable dm verity zip and rom successfully booted without wiping my internal
galileogarin said:
So when i want to change rom, I don't need to do a format data over and over again right?
Click to expand...
Click to collapse
yes, hopefully
(on my previous device (surya) there was this one specific custom ROM (RRemix), for which wipe data was not enough and you must format data even on decrypted storage if you wanted to have clean flash/installation, so I do hope this will not be the case on sweet)
Hallo,
Can somebody confirm this script working?
i tried everything on the world but no suc6
format data x times not working
But i am tired to complete install a rom and all other stuff again and again
Fred Vlippenstein said:
Hallo,
Can somebody confirm this script working?
i tried everything on the world but no suc6
format data x times not working
But i am tired to complete install a rom and all other stuff again and again
Click to expand...
Click to collapse
You can check attached screenshots in OP, there you can see status of my phone - NOT ENCRYPTED. I achieve that by flashing the attached script and FORMAT DATA confirmed by YES. So yes, this script works, at least on my phone did...
added another working encryption disabler script (tested on sweet), check the OP
so which should i use?
rachadiadi said:
so which should i use?
Click to expand...
Click to collapse
- try rmcrypt.zip, it has at least some error handling, which can tell you, if something is wrong with the process of the disabling encryption
- the first one modified by me, is very basic, super simple one, which only blindly try to copy necessary files to the needed location, but never check if that is actually accessible or not, so in the end you'll never know, if that copy process really did what it should (I encountered at least one case, where first script says it finished successfully, but in the end, after reboot to system, my /data partition ended encrypted)
same here,update to miui 12.5 and flash the needed files phone is incrypted again but if i restore the miui v12.0.15 who was decrypted its decryped after reboot
strainge situationaa
no other solution found try every other options
MIUi stock indonesian is not SUPPORTED ?
arifn82 said:
MIUi stock indonesian is not SUPPORTED ?
Click to expand...
Click to collapse
MIUI in general not supported
jeryll said:
MIUI in general not supported
Click to expand...
Click to collapse
any known alternative work-around for miui?
arifn82 said:
any known alternative work-around for miui?
Click to expand...
Click to collapse
AFAIK not ATM
jeryll said:
AFAIK not ATM
Click to expand...
Click to collapse
previously i had a poco x2 and this was possible for that device
arifn82 said:
previously i had a poco x2 and this was possible for that device
Click to expand...
Click to collapse
you can also try latest Orange Fox recovery, which has built in switch for disable forced encryption and is optimized for work with MIUI, but if that actually works you'll need to find out by yourself...
jeryll said:
you can also try latest Orange Fox recovery, which has built in switch for disable forced encryption and is optimized for work with MIUI, but if that actually works you'll need to find out by yourself...
View attachment 5323251
Click to expand...
Click to collapse
will try and inform you !
arifn82 said:
will try and inform you !
Click to expand...
Click to collapse
did it work?
added another working encryption disabler script - this time for OSS vendor based ROMs (tested and working on sweet), check the OP
jeryll said:
added another working encryption disabler script - this time for OSS vendor based ROMs (tested and working on sweet), check the OP
Click to expand...
Click to collapse
Thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Device: Realme 8
Model: RMX3085
Twrp version: 3.6.0_11
Build Status: Unofficial Beta build
--.Tester Information<--
He has worked tirelessly bringing this to life
| Name in Github: EngRudhy |
| Github: https://github.com/EngRudhy |
|Telegram: https://t.me/E_oil |
Download Link:
TWRP-3.6.0_11-RMX3085-20211121-0627.zip | by Adasi_Kaakyire for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Source:
GitHub - skyhuppa/Realme_8_RMX3085
Contribute to skyhuppa/Realme_8_RMX3085 development by creating an account on GitHub.
github.com
Vbmeta:
vbmeta.img | by Adasi_Kaakyire for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
-->What is not working? -->| give feedback |
-->CREDIT-
/Twrp Team
/ EngRudhy
/ HemanthJabalpuri
/ ʂɑʈɧɑɱ ɧʋʂʂɑꀤɳ
-->CAUTION-->
/backup device or have access to device original firmware before manipulating the device.
-->INSTALLATION GUIDE>--
/unlock bootloader
/flash twrp recovery image from fastboot
/flash vbmeta
/wipe data
-->ROOT GUIDE<--
for root refer to Engrudhy's thread:
https://forum.xda-developers.com/t/flashing-twrp-and-rooting-realme-8.4366399/
Realme 8 5G [RMX3241]
Twrp:-> https://www.androidfilehost.com/?w=files&flid=331342
source:-> https://github.com/skyhuppa/Realme_8_5G_RMX3241
Status:-> Need Tester
Note:-> Zip contain original stock images except Twrp
Many thanks to you. It's work,i install it with mtkclient.
THANKS A LOT!! Now Realme 8 is truly a full-fledged Android smartphone!
Are there any custom roms for realme 8
Thanks!
multicpsb said:
Many thanks to you. It's work,i install it with mtkclient.
Click to expand...
Click to collapse
enjoy
tema7sav said:
THANKS A LOT!! Now Realme 8 is truly a full-fledged Android smartphone!
Click to expand...
Click to collapse
enjoy your smartphone
LITUATUI said:
Thanks!
Click to expand...
Click to collapse
welcome buddy
Ryan⠀ said:
Are there any custom roms for realme 8
Click to expand...
Click to collapse
though i do not own the device but will test some ports latter only if a user wish to test them.
Friends tell me how to re-block the bootloader ?? I try with a command through python mtk xflash seccfg lock or fastboot flashing lock and the phone stops starting.
Headmey2021 said:
Friends tell me how to re-block the bootloader ?? I try with a command through python mtk xflash seccfg lock or fastboot flashing lock and the phone stops starting.
Click to expand...
Click to collapse
I'm sure you have to flash the original firmware which is already in it locked state in other to achieve that.
Skyhuppa said:
I'm sure you have to flash the original firmware which is already in it locked state in other to achieve that.
Click to expand...
Click to collapse
where to find such a firmware and how to flash it?
Headmey2021 said:
where to find such a firmware and how to flash it?
Click to expand...
Click to collapse
Hello
I think you have to do it with realme flash tool available here
Download Realme Flash Tool (all versions) - .ofp Flash Tool
Download the latest version of Realme Flash Tool which allows you to flash or install .ofp firmware on the Realme Devices.
androidmtk.com
Here you can download stock system
Oppo_Realme_8_RMX3085_11_A.05_20210318_RFT_(by_oppostockrom.com).zip | by Five Corp. for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Then you have to boot your phone in fastboot mode, you can do it with adb
adb reboot fastboot
Choose stock system
And click flash (all data will be removed)
Headmey2021 said:
Friends tell me how to re-block the bootloader ?? I try with a command through python mtk xflash seccfg lock or fastboot flashing lock and the phone stops starting.
Click to expand...
Click to collapse
I had the same problem with unlocking the bootloader
Formatting the phone helped
HowWof said:
I had the same problem with unlocking the bootloader
Formatting the phone helped
Click to expand...
Click to collapse
how did you do that ????
Headmey2021 said:
how did you do that ????
Click to expand...
Click to collapse
If you still have stock recovery when you boot your phone hold the volume button down then click the power button to confirm booting. Phone should boot to recovery.
Choose English language (touch works)
Select wipe data then format data.
If you have twrp then here is a video tutorial
Phone took a long time to boot up. after that everything is working
Can this phone run PHH Treble? Am about to buy one in Germany but without Custom ROM it is a nogo for me
glockmane88 said:
Can this phone run PHH Treble? Am about to buy one in Germany but without Custom ROM it is a nogo for me
Click to expand...
Click to collapse
Don't know what phh treble is but i have the device and in the device info app it says treble is supported
glockmane88 said:
Can this phone run PHH Treble? Am about to buy one in Germany but without Custom ROM it is a nogo for me
Click to expand...
Click to collapse
phh is available for android 11 devices, just search what is best fit your device specs. Since you have twrp installed you can try roms provided you know what you are doing.
Ryan⠀ said:
Don't know what phh treble is but i have the device and in the device info app it says treble is supportedView attachment 5474867
Click to expand...
Click to collapse
phh are gsi made for treble support devices. When device support treble by default, it can run gsi roms provided you know what you are doing.