Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FAQ by sunny2303 and toxicthunder
--------------------------
What is an MD5 check-sum?
MD5 sum helps you identify any probable data loss issue which might have happened during the download process
and as a result of which you might be at a risk of flashing a incomplete/inaccurate download.
To mitigate this risk, simply check MD5 sum
(This can be easily checked with the help of ES file explorer/ Root explorer apps) and compare it with MD5 given on download site.
These 2 minutes can save 2 hours of reflashing for you.
What are the safe kernels that I have to be on, in order to flash this ROM?
CM9 / CM10 based kernels
any NoteCore, SpeedMod v4 and above, Franco v4 and above series of kernels.
any GB kernel.
I am coming from ABC - XYZ rom.
Is it safe to flash this ROM over it?
Yes ONLY when your ABC-XYZ reads -
Official CM10 or AOKP builds
CM10 or AOKP variant builds
Any other AOSP based ROM
I want to brick my device and then blame HI for it.
What do I do?
The best way to brick your device and blame HI for it is to flash HI over these kernels -
any CF--Root ICS kernel
SpeedMod v3 and below, Franco v3 and below
old leaked kernels and re-packs such as LP1, LP5, LPY and LP6 etc
What is Full Wipe & what is Cache Wipe using CWM?
Full wipe = Wipe Data / Factory Reset
This wipes all your user data like user applications, account settings, logins etc along with the cache partitions.
However, data stored in your sd-card like pictures, movies etc remain intact.
Cache wipe = User Applications and data remains untouched.
Only the cache you have previously accumulated gets purged.
What are Gapps? Why do I need them?
Please buy a Nokia or a BlackBerry.
Best wishes,
Toxic
Which version of Gapps should I flash? And when?
You can also download from Goo.im or other JB threads that provide the same.
You may flash them after you have installed the ROM (assuming you have done so after a Full Wipe).
Yet, I would personally request that you first flash the ROM and re-boot to see if all's well. Flashing Gapps + Kernel + other MODs seems to be giving issues on THIS rom.
Which kernels can I use with HI?
Since the ROM has been updated with the latest r3p0 drivers, it is essential that you use ONLY the kernel that comes with the ROM.
Where is the Email App? And the Exchange App?
Anything that you can't find will be provided in a .zip file called [COLOR="Green]RemovedAPKs[/COLOR].
[IMG]http://img1.moneycontrol.com/images/mf/tick_mark.png[/IMG]Download the zip and place in your device.
[IMG]http://img1.moneycontrol.com/images/mf/tick_mark.png[/IMG]Using a suitable File Manager to extract the zip.
[IMG]http://img1.moneycontrol.com/images/mf/tick_mark.png[/IMG]Copy the apks for applications which you want.
[IMG]http://img1.moneycontrol.com/images/mf/tick_mark.png[/IMG]Paste them under[B] /system/app[/B] folder.
[IMG]http://img1.moneycontrol.com/images/mf/tick_mark.png[/IMG]Change permissions to[B] rw-r--r--[/B] (simply set it same as any other app in the same folder)
[IMG]http://img217.imageshack.us/img217/1002/linekb.png[/IMG]
[SIZE="3"]I can't find S-Note or S-Memo in this ROM. [/SIZE]
Neither can I.
What is the default DPI in HI and how can I change it?
Default DPI in HI is 320. To modify this -
Open your File Browser that has root access.
Navigate to /system/build.prop and open it as a text file.
Scroll down to ro.sf.lcd_density and set it to any number of your choice. Recommended values are 240, 213, 160 etc.
Reboot.
In case there are errors or issues, no one is responsible but yourself. So unless you know what you are doing, please tread cautiously.
How do I choose themes on HI?
Download any compatible theme of your choice from the Play Store.
Go in System Settings --> Themes –-> Theme chooser.
Choose downloaded theme –-> Select Apply.
My Question is still unanswered. And I am a bit shy of asking on the threads, lest I should be stoned to death.
What do I do?
Read some motivational books that help you work on your self-confidence.
Come back to the thread and ask.
If it turns out that your question could be answered by simply using the search function,
or reading the first 4-5 posts - chances are you will still be stoned.
Motivational books are boring. I watched 300 instead.
Now I am all pumped-up to ask any question, no matter how pathetic.
Good. This gives us the opportunity to see how long you can withstand the stoning.
Your watching 300 should be of some help to you.
--------------------------
||||||**```~musssst read post~```**|||||||
IMPORTANT INFO
** Please search first and then read here/FAQ before asking the question in the thread - you might get ur answer. If not then ask away **
[*] Click Me for the Removed APKs zip.
Paste the desired apk from the zip to the /system/app folder using a root browser and set the permissions to -rw-r--r-- without fail :good:
[*] Kindly use the kernel which is already inbuilt in the rom. If you try to flash any other kernel that doesn't support the r3p0 mali drivers then it wont boot.:cyclops:
[*] The Andy 4.2 Clock app included in rom is different from the one provided in the removed apks zip. The removed apks zip contains the stock 4.1 clock app
Changelog:
Code:
[FONT="Franklin Gothic Medium"][SIZE="4"][B][COLOR="SeaGreen"]CP9 - HULK[/COLOR][/B][/SIZE][/FONT]
- The awesome themeing of ROM elements based on the [B]Marvel HULK[/B]!
- All synced till Nighty 9.2 (no new merges and extraordinary changes)
- Usual HI Tweaks
NT 9.2 - Nightly
- [B]Pure repo sync with AOKP gerrit. Check the AOKP gerrit for the recent changes. Cheery picks will be highlighted here[/B]
NT9.1 - Nightly
[B]- S-Pen gesture support (Thanks Steve Spear) (Swipe Right, Left, Up, Down, Double Tap and Long Press. Used Navbar actions so the spen can theoretically replace 6 buttons on the navbar.)[/B]
- Added option to show connected wifi network
- Added themes support to Mms (ala handcent theme ability)
- Cog Circle Mod Battery
- Additional HSPAP support
- Added setting to set Circles Lockscreen
- Added customizable options for Circles Lockscreen
- Restore correct volumes when headset is plugged
- Lefty Mode for NavBar
- NavRing: Long press actions
- Set Stock music layout for Lockscreen while enabling Circles style
- Fix volume track skip control with 3rd party applications
- Ability to set navbar width/height to 0 (off)
- Don't adjust volume when vol-downing to vibrate or silent
- Bluetooth: Making 48K as the default sampling rate for SBC encoding
- Other usual HI tweaks
CP 8.1 - Super Commando Dhruv Edition
[B]- Andy 4.2 Clock App included
- Andy 4.2 Camera with working Photosphere included (stock 4.1 camera is intact)
- Andy 4.2 Keyboard with gesture typing is included (select the "Android Keyboard" in Language & Input)
- Build themed on the Raj Comics superhero - Super Commando Dhruv (SCD)[/B]
[B]- Custom Vibrations[/B]
- Change network location provider package
- Resizable NavBar Widgets (Holo themed)
- Widget Picker color in Navbar
- Added back Quick Emoji
- Added timeout and instant lock option to slide lock
- Fix launch of home button when screen times out
- VPN Traffic Amount in Human Readable Format
- Added Fast Charge Toggle to Overlay (requires custom kernel)
- Added vibrate back to the stock toggles.
[B]- Custom Lockscreen targets[/B]
- Landscape while in call
- Fix H+ and added new navbar widget icon
- Add increasing volume option for alarm clocks (use DeskClock apk from latest removed apks zip)
- Fix menu button in landscape
[B]- Added Ram Bar in Recents screen (select the option)[/B]
- Fix landscape ring position (was cut-off)
- Fix Vibrations fragment when using dual-panel
- Make alternate GB layout look like GB
- Add Ring/Vib/Silent & Homescreen toggles to the lockscreen
- Enable audio & call related logs
- Lockscreen targets: make separate targets for Unlock and Homescreen
- Fix lockscreen wallpaper picking
- Added options to hide weather panel
[B]- Added Weather panel actions and clock/date derp[/B]
- Fixed Kill App
- Added group mms threading
CP7 - Ghost Rider
- [B]Kicka** bootanimation and theming of rom based on Marvel SuperHero GhostRider[/B]
- [B]Update to 4.1.2 (JZO54K) binaries from Google[/B]
- Block unsupported requests to avoid RIL wakelocks.
- Fix brightness bar on tabs.
- Un-hard-code default toggles and remove vibrate from default.
- Fixed 2G Toggle long-press action.
- [B]SystemUI: Custom Nav bar for Tablet UI.[/B]
- Alt Signal Layouts.
- [B]Add option for vibrate on expanding notification.[/B]
- Other bug fixes and optimizations.
CP6.1 - TRANSFORMERS
- [B]This build specifically addresses the RILJ wakelocks.[/B]
- Rest all CP6 merges are retained
- [B]Kindly use the kernel which is already inbuilt in the rom.
*If you try to flash any other kernel that doesn't support the r3p0 mali drivers then it wont boot.
*Wait till the kernels are updated by their devs to support the drivers and then you can flash anyone u like[/B]
CP6 - Transformers
- The awesome themeing of ROM elements based on the [B]Hasbro's Transformers[/B]!
- New bootanimation
- Add xhdpi sysbar images and add correct size icons for other resolutions
- Calculator now contain New Features
- [B]Added CPU boosting interface[/B]
* Boost CPU to max during scrolling
* Boost CPU to max on activity start/resume
- Update Sensors/Camera to VRLG7 blobs
- Fix Share to Clipboard Icon
- SystemUI: add screenshot to navbar
- [B]Add option for switching between UMS and MTP/PTP mode[/B]
- [B]Allow mounting of multiple volumes via mass storage[/B]
- Fix recents opening when waking the device with the home button without lockscreen
- Fix automatic brightness
- [B]Adds the ability to force dual panel at any dpi[/B]
*This allows tablet mode with single panel and also allows regular phoneUI with dual panel
*This will only affect apps with dependencies to framework-res.apk , in other words gapps email.apk etc are not affected
- SmsUsageMonitor: Increase default # of sms sent in checking period
- [B]Update with mali r3p0 libraries[/B]
- libmedia: Fix for LPA audio loss issue
- ROMControl option for Default App Picker Alternate Style
- New Notification Toggles. Thanks Cyberboob
- Usual HI tweaks and custom rings
CP5 - Spiderman
- Spiderman Edition, Dedicated to Bangsti
- New Spiderman Theme
- Latest AOKP merges till 25th Sept 12
- Nova Launcher upgraded to version 1.3.1
- Added weather key for samsung cameras
- Fixed setting of custom icons for navbar targets
- Fix error when attempting to enter Phone setting
- Stopwatch & Countdown timer added
- Update Google repos to android-4.1.1_r6
- New Bootanimation
- Fix NavBar ring's center layout on lowered DPIs
- Fix NP check in CPUSettings
- Some tweaks to suppress the memory leakage
- In input added option to toggle pointer icon when using stylus - by default pointer is off
- Made all icons look the same as the Google Now icon in the NavRing
- Added USB mass storage notification to tablet status bar
- Disable touch while using the stylus
- QuickReply: multi SMS reply WIP
- Cleaned up ROMControl and reorganized the Lockscreen
- Fixed the random numbers showing up when setting a DPI
CP4.1 - IronMan2
- Update fix to counter the app FC issues
- Latest AOKP changes till - 17th Sept
CP4 - IronMan
- The awesome themeing of ROM elements based on the Marvel SuperHero IronMan!
- AOKP changes till - 15th Sept
- Force TabletUI at any dpi and DPI changer
- Allow Rotation of Lockscreen
- Custom Vibrations
- Allow full theming of Contacts & MMS via theme chooser
- Let the T9 dialer search through nickname and company
- Timer Snapshot & Volume Zoom support in Camera
- Add ability to answer call with hardware home button
- Add daily reboot option - (use this option if in case u experience severe memory leak)
- Fix for phone rebooting when unlocking in landscape
- Fix for NavBar Hide
- Custom HI wall and tones
- Other usual HI tweaks
niyazidk said:
I have su installed after i flash the rom. When i try to update su binary, i get an error massage because su cant get root acces. Anyway now i made a hard reset and updated su from market. The result is the same.
https://mail-attachment.googleuserc...344028288674&sads=0TdBJuEqtB9jamNHEju9b50PmkM
Click to expand...
Click to collapse
niyazidk said:
I did it as you write, but i am not prompted to gain root acces. I was on cm9 before this without this problem and flashed abys kernel before flashed this. I am going to sleep... : (
Click to expand...
Click to collapse
niyazidk said:
Her is the solution... flash it in recovery
Click to expand...
Click to collapse
You guys just require everything to be flashable! Some clear instructions but no one want to follow them Its hard to read than to flash ?
Hope you guys know there are two root access granting apps - Superuser by chainsdd and SuperSu by chainfire.
By default the SuperSu is there in the rom. When u open it it will give you update binary pop up and when u click on continue it will say operation failed.
So just hit the play store and install the Superuser (for those who have hard time finding it on store here) After that open Superuser once and update if it asks to.
Now go ahead and open SuperSu and it will ask for root access now....grant it and done. Now all the root access will be given by Superuser and not SuperSu.
Hope this helps Try reading and following the steps...they are easier than flashing
P.S.- Will be fixed in the next version. Added to the to-do list and working on it and other fixes (basis Preview 3 by xplodwild)
Bug report : Remove navigation bar in settings does not work
aalupatti said:
Bug report : Remove navigation bar in settings does not work
Click to expand...
Click to collapse
Yeah thanks. Added for the next version fix. Already figured out the way to remove it. Just need to test
WoW. Congrats. Better Comes. Best To Come. Downloading Now. Will post Results in Discussion Thread Later.
On which preview it is based?
toxicthunder said:
sorry guys, unfortunately it was way past mid-night when I uploaded this - hence couldn't complete the OP.
Working on next build, as well as the OP.
One more thing, before trying out solutions to any bugs or issues, please consult with people who have the necessary know-how regarding the topic - Asylum inmates need not be told. This is just for the newer users.
If you try to be a smartass and pass on stupid advice (like Abyss is safer than CM9) I will report you immediately.
Cheers!
Click to expand...
Click to collapse
We don't want excuses toxic we want no we demand results and etas and Siri and smemo too lol
from the padded cell tucked away in the dark
Hey, thank you for another jellybean port. You guys make our notes better and better
One thing tho, I notice that stock launcher is Nova launcher. Is there anyway that we can get stock jelly bean launcher?
Siri is a must if you can't provide that just give up. LOL
Sent from asylum east wing wardens office.
Morning Toxic
is it worth to flash the version 0.1 after the test or shall I wait for the next one?
I'm still on JB had FC with Tapatalk and Playstore.
Bluetooth is working well.
edit
Don't need Siri she's to arrogant
Everyone, just a small request from me - please use the discussion thread so that we can keep this thread clean.
Thanks
Sent from my GT-N7000 using xda app-developers app
vet-note said:
Morning Toxic
is it worth to flash the version 0.1 after the test or shall I wait for the next one?
I'm still on JB had FC with Tapatalk and Playstore.
Bluetooth is working well.
edit
Don't need Siri she's to arrogant
Click to expand...
Click to collapse
No need. Nothing much changed.
Sent from my GT-N7000 using xda app-developers app
I hope this will be fix gps, will be my daily for sure.
Guys I want to know if u also face the same problem or I only screwed up something. Start the Android Hotspot and try connecting any other phone or tablet or lappy and see if it gets connected and the 3G or 4G watever gets shared over there.
In my case hotspot opens up fine but m unable to connect anything to it.
No one reported the issue hence thought of asking
BOOMED from my BOMBASTIC NOTE
I never use hotspot but I just tried and I faced the same issue as you.
abhisahara said:
Guys I want to know if u also face the same problem or I only screwed up something. Start the Android Hotspot and try connecting any other phone or tablet or lappy and see if it gets connected and the 3G or 4G watever gets shared over there.
In my case hotspot opens up fine but m unable to connect anything to it.
No one reported the issue hence thought of asking
BOOMED from my BOMBASTIC NOTE
Click to expand...
Click to collapse
It's a known issue. reported it on preview 1. I need it lol
I really don´t like to repeat myself, but on which preview is it based?
TheROM - take it or leave it
Okay guys, as promised I am sharing the ROM I made for myself to suit my personal needs.
I prefer stability and smoothness over features - so it focuses on some core features I love but isn't overloaded with each and every possible option out there.
All features are carefully and cleanly picked into the ROM without the use of nasty hacks wherever possible.
Please read the FAQ at the end of the first post before using this ROM!
If you appreciate my work on the LG Optimus 2x you can support me by donating!
I am doing this for free in my leisure time because I like working on Android stuff and helping others out.
You're not required to donate, but I highly appreciate a couple free beers or pizzas as a gratidue for my work.
To quote one of the most famous xda developers:
Chainfire said:
Don't be a leech, buy me a beer (and use the "Thanks" button!). Imagine if every CF-Root user has donated me $1...
Click to expand...
Click to collapse
I am nowhere near his usercount, but just imagine if every happy (and only those) user of one of my ROMs has donated 5€+.
Important:
Let me explain the "take it or leave it" phrase from the title:
You got two options, either you like the ROM and use it as it is without any complaints, or you don't and use another one.
I made this ROM for myself and am sharing it to you as there's a broad interest.
But I am not interested at all in feature requests, ETA questions, silly bug reports(!), etc. etc.
If I derped something (e.g. a FC within the settings app) you can of course post about it.
But you have to a) do a full wipe and confirm the bug is still there, b) describe your bug in detail, c) post a logcat.
It is the ROM I personally use (or for the CM10.1 version: used), so you can talk about the ROM, but you don't get to ask about any changes.
If we're clear on the rules let's go to the fun part.
This thread is in the general section for a reason. As we're not going to discuss which features this ROM absolutely needs we got a whole thread to our liking.
Which means: It's meme time!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FAQ:
Read the FAQ carefully before asking any questions!
Okay, I know you said no feature requests, but I really need [feature xyz]!
Why should I try this ROM?
I want to try this ROM, can I just flash it and be good to go?
I have a question..
New: I have a question regarding bluetooth...
Listen, I'd like to know if you could ...
I will donate to you if you include my beloved feature:
This is a joke right?
Really, I just want to know when you're going to release the next update?
I don't like the way you're doing this thread!
TheROM
Okay, this ROM comes in two versions. CM10.1 and CM10.2 based.
The former is based on my work on CM10.1.
The latter is based on my work-in-progress CM10.2.
If you're new to the LG 2x then you should check both linked threads and read about the differences, bugs and features of these ROMs.
I just don't see a reason to have two threads for this ROM, thus I'm merging them together in here.
The CM10.1 ROM is deprecated, it's been the ROM I've been using until I made the switch to CM10.2.
I just share it here for those of you who might prefer it. So don't expect any further updates.
FEATURES / INFORMATION:
Only features I made or ported are listed here, nothing that's already in CM.
TheROM CM10.2:
Hybrid Engine (per app dpi / layout)
Halo 2.0
Additional hardwarebutton customizations
(like Screen off, open Torch, Power menu etc.)
Notification Brightness slider
Center Clock option
Text-only battery style
PreferenceDrawer in the Settings
Custom Carrier text
Advanced low battery options
My memory management option
Fixed performance menu for Tegra2
Option for all home screen widgets on the lockscren
notification drawer background & transparency
standard softkey vibration lowered
ships with the awesome kowalski kernel by pengus77
comes with my non-neon compatible mini gapps package
Option to use the external storage as default one
comes with bluedroid which means speedup bug and no BT phone calls possible
If I find some time I might try to include bluez, but right now I don't and bluedroid will stay in until further notice.
App Ops option in the settings (with PAs changes)
based on the newest CM10.2 sources
and loads of small stuff here and there I forgot to list
Differences in the depracted CM10.1-based version:
comes with an older Halo version (1.0)
ships a couple more hardwarebutton customizations (esp. custom app)
comes with bluez and is compiled with GCC 4.7 which means a) no speedup bug but therefore b) no BT phone calls
based on CM10.1.2 stable + custom picks of the nightlies
Download:
Get the ROMs here:
http://tonyp.basketbuild.com/index.php?dir=main/TheROM/
All ROMs are for the newbl - if you're using the oldbl use the converter (or wait for someone to upload the converted build).
Kowalski Kernel M1 rh and my non-neon compatible mini gapps are included.
Installation instructions:
CM10.2 (coming from another ROM than my CM10.2):
Do a full wipe. Do another reboot after the first boot. Don't *****.
CM10.1 (coming from another ROM than my CM10.1):
Do a full wipe!
Updating to a newer TheROM build:
Flash the ROM. Reboot. No wipes needed.
Do not update from any CM10.1 ROM to CM10.2 (full wipe it is!)
Known Bugs:
Do not ask about features on the known bugs list. They're known, there's no need for a reminder.
all CM bugs (no HDMI rotation etc.) are present - check the CM10.1 / CM10.2 threads for more details
This especially means that on CM10.2 bluetooth calls are not working!!
If this is a dealbreaker for you: move to a ICS / CM10 or my CM10.1 t-build ROM!
See this post for more details regarding the bluetooth situation.
Hybrid Engine: Sometimes changing the system dpi will produce a small layout error (an empty line below the statusbar).
Just do a reboot and it's gone
Credits:
TheROM contains features from the following ROMs.
I either ported them myself or rewrote them based on their inspiration:
CyanogenMod
[*]ParanoidAndroid
[*]Jellybeer
[*]SlimBean
[*]ChameleonOS
[*]PAC-man
A special thanks to these people:
pengus77 for his awesome kernel
arcee for his work on CM7 - CM10.1
spyrosk for the bootloader converter (and AIO toolkit)
all the guys helping out in the threads (which are too many to list)
Thanks for the people who provide me with buildbox access and free hosters:
xda
Korumera (xdafileserver.nl)
basketbuild
vadonka
goo.im
This Known Issues List
should prevent one-liner finding reports related to already known issues
should keep later disappointment from end-users of tonyp's theROM and clean CM 10.2
defines an everlasting unique identifier for each known issue. Use the identifier for simplified unambiguous communication. Please write e.g. "issue #2" if you want to refer to the silent blue-tooth call bug
should show possible workarounds, or, even better, should motivate discussions to fix the issue.
should neither let you imply that the issue will be fixed soon, nor that it is fixable at all! It is technically really hard to analyze, find and fix the root cause. Please never ask for an ETA! The community is aware of, and is of cause already unhappy (see e.g. this post) about these known issues.
will not cover issues that exist in only 1 or 2 intermediate builds of theROM and that are already fixed in the latest build. Please also consult change log by @[email protected]
Known Issues List as of 2013/12/28 (theROM build 22-26 resp. clean CM10.2 incl. 2013-12-13):
HDMI doesn't work
Workaround: use stock LG GB ROM (I don't know whether stock LG ICS works)
Calls from BT headset connect but are silent for caller and callee
Workaround: use e.g. CM10.1 T-builds or ParanoidAndroid (PA) ROM
Root cause: not yet found; speculation: volume gain factor is set to 0 somewhere
Discussion: see e.g. post3, post2 , post1 issue b)
Mobile data counting doesn't work (blue arrows on mobile data indicator don't appear; e.g. Avast shows error message)
Workaround: use e.g. CM10.1 T-builds or ParanoidAndroid (PA) ROM
Root cause: bug in Android 4.3 (inherited to CM10.2)!?
Discussion: see e.g. note 3 in post3, post2, post1, report to Google
Stock camera
takes heavily over-exposed pics with flash
Workaround: tap the screen first before you click the camera fire button; this will correct exposure parameters
crashes often, or produces crashes of Trebuchet and gallery
Workaround 1: use e.g. cam app ported for CM10.1 by feav; it provides also features like panorama pix missing in the stock cam
Workaround 2 (not fully proven): flash the gallery.apk from build 23; some say the stock cam works without crashes then
BT media playback speeds up after minutes to hours.
Fix: at least fixed in build 22 (I dont't remember the exact build)
Some apps (e.g. Candy Crush) crash with the KK in the RAM hack version
Workaround: flash the no RAM hack (norh) version of Kowalski kernel (KK) by Pengus77
Slow GPS fix. Cause: missing file \data\gps\lto.dat that is up to date too.
Fix: seems to be fixed in build 23; some issues with the fix have been reported; under investigation
Literature: xda forum thread2, [URL="http://forum.xda-developers.com/showthread.php?p=15271402#post15271402"]thread1[/URL]
Long lags after heavy filling and emptying the flash memory. Reboot does not help
Workaround: backup data partition, wipe it, and restore the backup
Root cause: kernel does not implement TRIM functionality that makes use of the SD/MMC ERASE (CMD38) command.
References: wikipedia TRIM, wikipedia TRIM#SD/MMC
Discussion: post4, post3, post2, post1
Mobile data mode keeps being disabled when switching airplane mode off
Workaround: either disable and re-enable data or toggle 2g/3g twice. In some rare cases these workarounds won't work and a reboot is needed
Root cause: yet unknown
Current time shown is that for GMT time zone instead of for your local timezone. Time shift is always in full hours.
Workaround 1: Reboot; normally this restores correct time display.
Workaround 2: Disable automatic time sync and install a time sync app
Workaround 3: If you'd like to keep using automatic time you should add "telephony.test.ignore.nitz=true" to your build.prop
Root cause: yet unknown
Discussion: post2, topic #3 in post1
Some apps always crash under theROM and they also don't work on stock ICS on P990. Some of such seem to be Viber, Instagram, etc.
Request: please report as soon as the app started working correction on a new theROM build.
Recommendation 1: Search in this thread if your app is known to be incompatible with theROM
Recommendation 2: Search the internet if your app is known to be incompatible with stock ICS on P990
Recommendation 3: Try your app on P990 under stock ICS
Rule: never post problems with your app in this thread if its incompatibility to theROM or ICS on P990 is already known!
Recommendation 4: Ask the author of your app for help
Workaround: Use your app on P990 under stock ICS, or on another phone. (sorry for bad news!)
Root cause: potentially missing NEON support by P990; many others possible
no FM radio
note: theROM builds from version 27 ship Kowalski Kernel 3.1 (instead of KK 2.6 M1). As this might solve old known issues and might bring new ones I decided to archive and hide the above list for builds up to version 26. The below list for build version from 27 starts as a 1:1 copy of the above. As I am not on build 27 yet, I am not able to bring in my own experience. Additionally I don't have the time to read and evaluate all posts regarding build 27+. Please notify me for necessary corrections and additions of the below list.
Known Issues List as of 2013/12/28 (theROM build from 27):
HDMI doesn't work
Workaround: use stock LG GB ROM (I don't know whether stock LG ICS works)
Calls from BT headset connect but are silent for caller and callee
Workaround: use e.g. CM10.1 T-builds or ParanoidAndroid (PA) ROM
Root cause: not yet found; speculation: volume gain factor is set to 0 somewhere
Discussion: see e.g. post3, post2 , post1 issue b)
Mobile data counting doesn't work (blue arrows on mobile data indicator don't appear; e.g. Avast shows error message)
Workaround: use e.g. CM10.1 T-builds or ParanoidAndroid (PA) ROM
Root cause: bug in Android 4.3 (inherited to CM10.2)!?
Discussion: see e.g. note 3 in post3, post2, post1, report to Google
Stock camera
takes heavily over-exposed pics with flash
Workaround: tap the screen first before you click the camera fire button; this will correct exposure parameters
crashes often, or produces crashes of Trebuchet and gallery
Workaround 1: use e.g. cam app ported for CM10.1 by feav; it provides also features like panorama pix missing in the stock cam
Workaround 2 (not fully proven): flash the gallery.apk from build 23; some say the stock cam works without crashes then
BT media playback speeds up after minutes to hours.
Fix: at least fixed in build 22 (I dont't remember the exact build)
Some apps (e.g. Candy Crush) crash with the KK in the RAM hack version
Workaround: flash the no RAM hack (norh) version of Kowalski kernel (KK) by Pengus77
Slow GPS fix. Cause: missing file \data\gps\lto.dat that is up to date too.
Fix: seems to be fixed in build 23; some issues with the fix have been reported; under investigation
Literature: xda forum thread2, [URL="http://forum.xda-developers.com/showthread.php?p=15271402#post15271402"]thread1[/URL]
Long lags after heavy filling and emptying the flash memory. Reboot does not help
Workaround: backup data partition, wipe it, and restore the backup
Root cause: kernel does not implement TRIM functionality that makes use of the SD/MMC ERASE (CMD38) command.
References: wikipedia TRIM, wikipedia TRIM#SD/MMC
Discussion: post4, post3, post2, post1
Mobile data mode keeps being disabled when switching airplane mode off
Workaround: either disable and re-enable data or toggle 2g/3g twice. In some rare cases these workarounds won't work and a reboot is needed
Root cause: yet unknown
Current time shown is that for GMT time zone instead of for your local timezone. Time shift is always in full hours.
Workaround 1: Reboot; normally this restores correct time display.
Workaround 2: Disable automatic time sync and install a time sync app
Workaround 3: If you'd like to keep using automatic time you should add "telephony.test.ignore.nitz=true" to your build.prop
Root cause: yet unknown
Discussion: post2, topic #3 in post1
Some apps always crash under theROM and they also don't work on stock ICS on P990. Some of such seem to be Viber, Instagram, etc.
Request: please report as soon as the app started working correction on a new theROM build.
Recommendation 1: Search in this thread if your app is known to be incompatible with theROM
Recommendation 2: Search the internet if your app is known to be incompatible with stock ICS on P990
Recommendation 3: Try your app on P990 under stock ICS
Rule: never post problems with your app in this thread if its incompatibility to theROM or ICS on P990 is already known!
Recommendation 4: Ask the author of your app for help
Workaround: Use your app on P990 under stock ICS, or on another phone. (sorry for bad news!)
Root cause: potentially missing NEON support by P990; many others possible
no FM radio
Consider not flashing theROM in case you can't live with one or more of the listed open issues.
Please report any ideas, how to further analyze or fix the issue. Or please provide better workarounds.
The above list is to my best knowledge. I can neither guarantee it is correct nor it is complete. Please help to improve it.
Every bug is an issue. But there might be issues not caused by bugs (= errors in source code).
thanks to
@tonyp
@spyrosk
@pengus77
OLD BUILDS DOWN HERE :
"THEROM" OLD BOOTLOADER VERSION 26.2 CM 10.2
"THEROM" BUILD#3 OLD BOOTLOADER VERSION 26.2 CM 10.2
"THEROM "BUILD #4 OLD BOOTLOADER VERSION 29 AUG
"THEROM" BUILD #9 OLD BOOTLOADER VERSION
"THEROM BUILD10" OLD BOOTLOADER VERSION
"THEROM BUILD13" OLD BOOTLOADER VERSION
"THEROM BUILD15" OLD BOOTLOADER VERSION
"THEROM BUILD16" OLD BOOTLOADER VERSION
"THEROM BUILD17" OLD BOOTLOADER VERSION
"THEROM BUILD 18" OLD BOOTLOADER VERSION
"THEROM BUILD 20" OLD BOOTLOADER VERSION
"THEROM BUILD 21 OLD BOOTLOADER VERSION
"THEROM BUILD 25 OLD BOOTLOADER VERSION Thanks @dcr-NI (first conversion)
if someone is also interested in the experimental version, please check for the link below: These two builds are not exactly same, please see which suits you more and give feedback to @tonyp accordingly.
"THEROM CM10.2 - exp-opt OLD BOOTLOADER VERSION
Thanks and enjoy guys
Changelog TheROM - take it or leave it
Changelog build 27:
Ships with the awesome kk 3.1 bcmdhd alpha 15 by @pengus77.
Big thanks to @hjunii - without him this wouldn't be possible.
added option & quicksettings tile to enable/disable Halo
reverted my netd tethering hacks, they were bcm4329 specific.
I do not know if tethering works with bcmdhd, yet - feedback required
re-enabled wifi optimizations by default (they were incompatible with bcm4329, so i had disabled them)
in case you notice any problems (which you shouldn't) go to settings - wifi - advanced and untick it.
Changelog build 26:
merged CM10.2.0 stable codebase
merged all TheROM translations pull requests
Changelog build25:
fixed Stock Camera
cyanogen has merged in some Features which our camera blobs don't support anyways, so I've rolled them back
merged upstream
I believe this should fix the ThemeChooser some people posted here, at least I've seen a commit regarding that on Gerrit.
Please provide feedback.
Changelog build 24:
fixed the brightnessslider to only show when enabled
merged CM10.2 RC1
ships with a customized KowalskiManager by @wfd which automatically enabled auto hotplug as well
Changelog build 23:
added auto downloading the lto.dat file (for gps assistion data). Hopefully this brings up GPS back to the CM10.1 standards (at least after the first fix aka TTFF).
It's enabled by default, but will only update the file via WiFi by default (check the new option at Settings - Location access)
Properly enabled GPU accelleration.
I've found out that our device didn't fully utilize hardware accelleration. The reason is our low RAM - and enabling hwa takes about 8mb.
But with a GPU as powerful as ours I think those 8mb are well spent, we'll see how it turns out, make sure to post feedback.
In a first quick test the UI does seem more responsive.
Note that this is NOT equal to the "Force GPU rendering" option in the developer section! This one should stay off, as apps that for various reasons do not use GPU rendering shouldn't get forced into it.
enabled 2nd core auto hotplug by default. This will hopefully get rid of the plug-in BSODs of people not reading the threads (and thus not enabling the option at the KowalskiManager).
updated Torch overlay (this does hopefully fix the missing torch widgets some people had - please post feedback)
updated the OpenGL version. I have no idea how and if we'll notice that.
Thanks @DJNoXD for sending me a pull request.
removed the CMUpdater which slipped in under my nose.
I've slapped in a new more generic bootanimation, courtecy of +Dima Skvarskyi
Changelog build 22:
-Os buildflag optimizations
(smaller modules loaded into the RAM means more free RAM available to the phone)
synced to CM10.2-M1
Changelog build 21:
merged upstream
(3 weeks of CM10.2 patches and updates - didn't particularly check them, if you notice something new post it here)
included Google Maps (v7.3.0) by default
(as Google removed Tegra2 compatibilty for v7.0+)
reverted the Camera Wrapper for now, I am not convinced about it's usefulness and want to try it without for some time again.
Changelog build 20:
It's mostly identical to build 19, I just merged upstream and included the new translations (see below).
A couple days ago I read a tip somewhere to use -Os instead of -O2 when compiling arm modules.
So I just made another exp build to try this - you can find it labeled as "exp opt" (experimental optimization) in the download directory.
In theory the exp build should have a slightly worse performance (if noticable at all) but more free RAM which could help our low RAM phone (if noticeable at all).
Oh and I've included the translations I got sent (Spanish, French, Russian, Portuguese BR & PT):
https://github.com/tonyp/TheROM-translations/commits/master
Changelog build 19:
It's basically an upstream merge - but CM fixed the Camera image being "stuck" after taking a photo, which is the last bug that I wanted to see fixed before calling it the next stable.
Changelog build 18:
Quickmemo support
As @Firtecy already posted he fixed the Quickmemo apk to work with CM10.2.
Thus I re-added the Quickmemo support into the framework.
I've recoded it with a better, adaptive implementation. Now you'll only have the Quickmemo entry in the Buttons settings when Quickmemo is actually installed - if not it will be completely hidden.
Flashable zip download here: http://tonyp.basketbuild.com/index.php?dir=main/TheROM/addons/
To open it you got two options: press vol- and vol+ simultaneously or assign the button at Settings - Buttons.
added a new bootanimation.
Thanks to @vviper for creating it!
replaced statusbar icons with the one from PA (which are a little lighter)
removed the Statusbar Transparency "always" option
Settings - buttons FC fix + another minor memory leak fix + merged upstream
Changelog build 17:
Network Location Toggle
Custom System Animations
Fixed a bunch of FCs & brought back Storage Settings content
merged upstream (Camera Launcher QS Tile etc.)
Changelog build 16:
removed ActiveDisplay again
disabled listview animation by default
You can turn it on at Settings - TheROM. I think they're quite fun to play around with!
merged upstream fixes
Changelog build 15:
Statusbar Transparency
Active Display re-added (I've disabled the proximity sensor properly now - it only gets used in the pocket mode now)
Still this does drain some battery when you get lots of Notifications. I'll look into creating a widget to toggle it on and off.
ListView animations
To show off and for the lulz it's enabled by default - you can disable (or change) it at TheROM settings.
I've added a a quick option to the Notification Drawer style options to restart the SystemUI.
I've been annoyed by the fact that I either had to reboot or use an external app.
changed default dpi to 213
(you can change back to the stock 240 at TheROM settings - hybrid)
merged upstream
(but removed the CMAccount, me no likey)
Changelog build 14:
Implemented the RIL_UNSOL_LGE_RESTART_RILD response.
This has been reported as missing by @gios_ some time ago here.
I'm not sure if the implementation is correct, I've adaptoed it from the P880.
We'll have to test and see if it changes anything for those who still have data drops every now and then (for me they seem fixed since kk 126).
(Note: This isn't related to the no signal after airplane mode bug, which you usually can solve easily by double tapping data in the QuickSettings (= disable and enable it)).
Replaced PerformanceControl with the KernelControl app by @Beene.
If you encounter any bugs make sure to report them to him and post your feedback about the app in his thread.
Merged upstream.
One of the changes is the integration of CMs PrivacyGuard into App Ops - called Privacy Guard 2.0.
You'll find it at Settings - Security - Privacy Guard.
Unfortunately the longpress on an item (where you could fine tune your settings in theory) isn't working yet (FCs), will get fixed soon.
Update: here is an updated Settings.apk which will solve the FC for those who need access to App Ops.
Needs to be pushed to /system/app. Then longpress the app in the Privacy Guard options.
Changelog build 13:
removed Active Display for now
(fixes the battery drain)
Changelog build 12:
cleaned some commits, especially Active Display
It works as expected for me - hopefully now for everyone else as well.
Additionally it's a "make clean" build, I assume the android version update broke something here in the last one.
fixed some logspamming
I've discovered a minor bug in the Processor settings in the Performance menu.
Thus I disabled it - to compensate it I included an updated PerformanceControl app again, which gots some decent additions compared to the old version
I removed ViPER FX again as I discovered you can just get it from the PlayStore
Don't worry, it'll be in English once you install it
restructured the TheROM Settings. I've got a PM from someone who wanted to translate it to other languages, this makes it easier.
You can download the strings here
After translating the file move it into the correct subfolder for your language and post it here, then I'll include it.
Changelog build 11:
I got great news. I don't know if someone remembers, but ages ago in my PA ROM I had experimented with hacking the framework and changed some ADJ values to protect the launcher from redrawing.
One shouldn't just change the values (that's what the SuperCharger does), as that would break androids default memory management, thus I re-arrenged the code in the ActivityManagerService to reflect those changes back then.
I just had a look at my old code and figured out a way better and way cleaner method to hook into that.
I've just compiled my testbuild and it seems to work. It's not yet ready, just a test if my theoretical concept works.
I want to introduce an option for that, where you can control the intensity. By the end of next week I will have a bit more time, then I'll expose an option in the settings.
My current idea is to call it "Prevent launcher redraws" with the levels "disabled", "moderate", "needtothinkofsomething" and "extreme".
Currently extreme is hardcoded.
I've uploaded the build to my TheROM folder if anyone wants to try it out. Please give feedback if you notice an improvement.
With extreme it'll be quite hard to get it killed, as only perceptible apps (like playing music) will be more important.
I've switched around between Google+, Boat Browser and the Reader+ app and I didn't manage to kill the launcher
Edit: good, opening webpages with loads of images in the browser does kill the launcher. We don't want to have it unkillable (keep in memory), when the system needs the ram it should be possible to get it.
It's a lot cleaner than the hacky way the Supercharger does to accomplish the same goal.
The supercharger hacks into the framework and changes the ADJ values directly - unfortunately these are directly accessed in the ActivityManagerService.java which causes some unwanted sideeffects with the default android memory management.
I'm just modifing the ADJ value at runtime.
Additionally what I really don't like with the Supercharger: It's prioritizing the Launcher above perceptible and even visible apps.
Killing the music player while listening to music or killing visible elements instead of the launcher when the system needs memory? That's insane imo.
To prevent confusion: visible apps are not identical to the foreground app - but could be some elements visible behind an overlay. Would still look bad if those suddenly dissappear.
Edit: I've decided to just brand it as build 11.
Additional changelog: Android 4.3 JLS36G merged
Changelog build 10:
- added Active Display options from ChameleonOS
- added notification drawer background options and transparency (requires a reboot to apply)
- QuickSettings: option to open the apps in floating mode ("in Halo") on longpress
- RAM usage circle on recent apps
- cherrypicked some memory leak fixes from various sources
- fixed some FCs
- fixed (?) the Trebuchet FCs (at least I can activate the searchbar again)
- merged upstream
Changelog build 09:
Based on the idea of alok.tari clicking the clock in the statusbar dropdown will open Timely if it's installed.
(Longpressing it will always open the clock app you set as default).
Then I reverted the dalvik low memory initializing, I suspect that to be related to some of the slowdowns. The system will use ~6mb more RAM again, but it might be worth it, we'll see.
Additionally I merged upstream of course - I've seen some fixes for headset plug-in (which fixes a bug if you don't have a music player app installed) and Trebuchet, I guess these will fix the issues reported here.
I will say it again: CM10.2 is in nightly status - which means there will be bugs every now and then in the sources.
Let's hope CM will try to build stable releases soon again, as soon as those are out the amount of new bugs will decrease.
I won't have the time to look into individual issues up until the end of this month.
I just quickly made this build for myself (and am sharing it here with you).
Changelog build 08:
- new options for Halo (ninja mode, ping etc.)
- ViPER FX replaces DSPManager
- back to the ramhack kernel (M1) - I just missed the additional RAM it gives which results in more Launcher redraws etc.
- Cyanogenmod account (check CMs G+ page for details)
- Trebuchet: Support for custom icons per shortcut
- merged upstream
Changelog build 07:
- notification sound bug fix while playing media
- enabled backlight button brightness options at Settings -> Buttons
- reverted gps.tegra.so to the one official CM10 and CM10.1 use (this fixes all GPS problems for me)
- included Kowalski M1 norh kernel
- merged upstream (loads of bugfixes from CM)
Last but not least I tried something highly experimental - I decreased(!) the playback buffer as I want to know if this has an impact on A2DP playback.
Unfortunately I don't have my BT headset at hand, so you guys need to test it.
> Is BT audio (listening to mp3s) still working?
> Does the audio still speed-up?
Additionally I added some missing bluetooth configurations which might or might not increase it's stability.
Changelog build 06:
Gosh I just hate bugs, so I just had to push out a quick fixup build
I fixed the SystemUI FCs (this has been a bit nasty!), the Bluetooth share FC after booting and @Firtecy fixed his disappearing brightnessslider after rebooting.
(you can push the Bluetooth.apk to the clean CM10.2 ROM to fix the bluetooth share FC there as well).
Changelog build 05:
I've added the Notification BrightnessSlider, ported by @Firtecy (thx!).
Additionally some other small fixes I stumbled across + I removed the QuickMemo option again for now - it only works for CM10 and CM10.1 until someone ports it.
Changelog build 04:
I've added the following hardwarekeys button actions to the ROM:
- Screen off
- Open Power menu
- Toggle Last app
- Toggle Torch
- Take Screenshot
- Quickmemo (this is optional, you need to use my Quickmemo installer)
The CM10.1 ROM had some more options (like custom app, re-assign the back key), but that would have required more work and time than I can currently spend).
The important ones are in now (I consider Torch and Powermenu/Screen off extremely useful).
Oh and in CM10.2 you got the sweet "double tap home action".
Google keyboard updated to v1.1
Trebuchet loosing icons should be fixed
Changelog build 03:
Hybrid Engine \o/
Focal removed - it's buggy and takes 12mb of space
Extract it from my CM10.2 ROM if you need it
Donation menu moved to the buttom to get it out of the way
Some new stuff for Trebuchet , including the option to use icon packs
Oh and the apk now takes about 6 instead of the former 12mb
Some small fixes here and there
Changelog build 02:
I have pushed a small bugfixing update online: cm-10.2-TheROM-20130826.2-tonyp.zip
I just did some quick workarounds which certainly isn't perfect, but fixes the FCs for now:
1.) I removed the SetupWizard.apk. The PreferenceDrawer Settings app is causing problems with it. I will fix it properly when I find the time, but the Wizard isn't really needed anyways.
You will just have to manually go to Settings - Accounts and add your Google account now after a full wipe.
2.) I have removed the two SDCards from the storage menu (it now only contains the option to use the external SD as default one).
I tried some quick fixes but they didn't work and I really gtg, so this will do for now. Again I will properly fix it when I get more time.
If you absolutely need access to the menu for something (although I don't know what this could be) you should be able to use the Settings.apk from my CM10.2 build for that.
I've hidden old changelogs to shorten the post. You have link to every original post/changelog from tonyp...
angel_boulevard said:
every day you bring us to new exciting..many many thank to you @tonyp..your rom is priority for me
P/s:a question.do any plan gapps 4.3 which google now working ?
Click to expand...
Click to collapse
Google now works in every ROM he puts out, I found that when you restore your apps your have to let everything instal [including google play services], uninstall google now and reinstall and it should work.
harucrux said:
Google now works in every ROM he puts out, I found that when you restore your apps your have to let everything instal [including google play services], uninstall google now and reinstall and it should work.
Click to expand...
Click to collapse
read again this is cm10.2 which one with mini gapps not working google now
Its working for me with the steps in the post above.
---------- Post added at 05:21 AM ---------- Previous post was at 05:12 AM ----------
angel_boulevard said:
read again this is cm10.2 which one with mini gapps not working google now
Click to expand...
Click to collapse
Its working for me with the steps in the post above.
Just couldn't stop laughing reading the FAQ
An awesome Rom and an awesome thread.
Thanks a lot for your hard work, we really appreciate it:thumbup::beer:
Sent from my HTC One using xda app-developers app
Dig bick! xD
Enviado desde mi LG-P990 usando Tapatalk 2
[FONT="<font><font>Comic Sans MS</font></font>"]Thanks for the new ROM, (again XD).
Keep it up!!.
Enjoy your holiday.
Greetings.[/FONT]
Thx 4 all Tonyp ! Downloading now...
EDIT : is possible to update from CM 10.2 by Tonyp 20130824.1 ???
Great work Tonyp thank you for everything!!
Going to buy you a beer!!
Since this is your personal ROM could you give us the settings and values you use or recommend?
Sent from my LG-P990 using Tapatalk HD
Where will you post changelog from now on since there are like 5 topics? i see new build but cant find changelog?
thanks
PYCON said:
Thx 4 all Tonyp ! Downloading now...
EDIT : is possible to update from CM 10.2 by Tonyp 20130824.1 ???
Click to expand...
Click to collapse
ya..no problem
I converted CM10.1 version for oldbl, flashed it and it works perfect. I'm currently uploading it, it will take about half an hour, if anyone wants to download it. Many thanks tony, I will donate as soon as I get my paycheck.
edit: here is the link https://dl.dropboxusercontent.com/u/11122462/cm-10.1-TheROM-slap-20130730-tonyp-oldbl.zip
sad to be the onliest guy, which have settings error crash after install.
I can't expect any help from TonyP (I can understand), anyone can help of the other users?
I do full wipe, install cm10.2 version, boot, the first I do is a reboot, and after next boot I choosed the language eng (us) and ok. then I got everytime settings error. then crash to language chooser......
all good now!
packyman said:
sad to be the onliest guy, which have settings error crash after install.
I can't expect any help from TonyP (I can understand), anyone can help of the other users?
I do full wipe, install cm10.2 version, boot, the first I do is a reboot, and after next boot I choosed the language eng (us) and ok. then I got everytime settings error. then crash to language chooser......
Click to expand...
Click to collapse
Try 4 WIPES !
Wipe Cache + Wipe Davilk + Wipe Data ( Factory ) + Wipe System ( Rom ).
Flash THE ROM e retry...
This ROM based on 4.21.40.352 stock firmware. Mini-rewiew Youtube
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official Telegram Grouphttps://t.me/joinchat/HUJg-1BhwwbbfeBTkomHYADisclaimer: I am not responsible for your broken phone , broken memory card, etc. All my ROMs I test first on my own phones , and then upload here
About facebook. ROM have facebook and Messenger installers- it is easiest and shorter way to get correct working x86 version, no need install incorrect ARM versions from GP. If you already install incorrect version then remove facebook updates Settings-apps-facebook-three dots. Then go to app menu launcher and open "f" Facebook icon/Messenger icon- you see facebook or Messenger installer, agree to update. profit, you get correct x86 version. For get update wait that facebook app update yourself
If you have problem in Quick Settings panel even if Settings-Asus customised settings-clear quick settings not help try to do it:
1. Remove data/data/com.android.systemui and data/dalvik-cache/x86/[email protected]@AsusSystemUI
2. Then reboot
On Zenfone Zoom ZX551ML camera working now! Damn, never install this patch on ZE551ML/550ML otherwise lose camera auto focus!
1. Install BORETS ROM
2. INSTALL this patch https://drive.google.com/open?id=121vtcUOv0TOmF-_QmmROfnOh8JFe9C_V
Patch will be universal for present and some future ROM. DO NOT forget install it every time after install BORETS ROM
Do not forget that in Asus Camera settings is option "Set volume keys as". Two variants:
1. Zoom
2. Shutter
Double tap to wake set in ZenMotion > click on text "Touch gesture" NOT on toggle switch>appear menu where you should set toggle switch on. [/B]
Never try to flash this ROM on Android 5.0 or oficial CM13 with Lolipop bootloader. You get bootloop
Asus Mobile Manager removed but you can install it and will work since 2017/11/16. And remember, that for android no need deny autostart, no need close process. Also Asus Mobile Manager have unless functions. I STRONGLY RECOMMEND NOT USE THIS APP and do not trust sweet words about clear and increase. This app is simple extra processes in your system which drain battery yourself and hinders android work
If you have stock/stock based Marshmallow ROM in this time, you may flash my ROM WITHOUT wipe data
If you like my works please do not forget donate to me(my PayPal account is [email protected])
Big thanks users for support:@sambapati
@kenbo111
@Magister54
@lost2
@topoldo
Features:
1. Hi-speed install(~3-4 minut)
2. ZenUI 3.0-4.0-5.0 features:
-animation QS icon from ZenUI 5.0
-weather animation on lockscreen
-camera widget on lockscreen
-Game Genie Support
-effects from ZenUI 3.5
-scroll bar from ZenUI 3.0
-default wallpapers from Zen 3
-UI style and settings style near ZenUI4
-Page Marker support
3. Advanced Quick settings panel 5x4 instead 4x4, maximum items for quick settings panel extend to 15 instead 12, minimum- 5 instead 8
4. Added USB Mass Storage mode support.
5. Added very small font size and screen timeout 45 seconds
6. Many preinstalled apps I updated to lastest versions
7. Unlock Asus SMS/MMS, Asus Music, Asus Calendar, Asus Browser, Asus Email, they available after install my rom
8. Added Conservative, Powersave, Interactive Pro, Intel governors and I/O schedulers Deadline, bfq,sio,sioplus,fifo,fiops,vr,zen
9. Video card changes:
a) available additional GPU frequencies 106, 133,160,177 MHz btw underclock but I to set min freq 457 MHz same as stock kernel. You may change GPU freq from my Kernel Adiutor version(it lay on google drive with my kernels) or from say99
b)Added additional thermal states. If on 457 MHz have overheating- freq go to 400 MHz, if overheating on 400- go to 355, if hot on 355-go to 320 MHz and so on. In stock kernel if overheating on 457 MHz- processor goes in 200 MHz and was lags in games
c) Added 640 MHz GPU frequency
10. Minimal level for auto brighness is 6 instead 15, minimal level of manual brightness is 2 instead 15
11.Multi-window mode. you can enable it in Settings>Developer Options>Multi-window mode
12. Multiuser mode support. You can see this in Settings point Users
13.Added choice adoptable storage(SD card as Internal Memory). May do it from Quick Settings after reboot or Settings>USB & Storage>click on sdcard> Menu(three points in Right corner)> Settings)
14. Improve touchscreen work quality
15. Better game performance
16. Processor mode "1 cpu per module" a place of "2 cpus per module" btw each core change frequency independent, not pair
17. Many preinstalled apps make removable. Hangouts,Instagram etc
18 Powersave modes is modified. In Normal mode Cpu frequency is 1583 MHz, in Power saving and Super saving- 1333 MHz
19. NTFS support (read and write). Required switch SELinux to Permissive
20. Flip Cover 3.0 support
21. Full screen incoming call photo for those who have photo in Contacts. It is individual setting for each contacts. Open nedded contacts from lastest incomming calls or contacts, click avatar icon and see "Photo", "display full-screen photo for incoming calls"
Changelog:
Change History BORETS ROM Stock Edition
2018/08/05
Fixed: in the volume bar the button was shifted down
Fixed: in the settings the icons were of different size and the Do Not Disturb icon was a stock
Fixed (maybe): some users flew DPI settings after reboot / shutdown of the phone
Mobile Manager Service with Android 7.1.1
Updated Asus Mobile Manager to version 5.0.0.16, Weather to 5.0.0.80
Updated many apps to the latest versions
Other
2018/07/31
Significantly improved sound quality
Updated many apps
Changes in the kernel: returned power management processor run-time
Updated patch for Asus Zenfone Zoom ZX551ML
Fixed: in the setup menu of the pattern, the points were not visible
Other
2018/06/14
The highest speed of the interface, such on the stock ROM you did not see
Some applications have been updated
The animation of the auto-rotate icon in the curtain is added, the animation of the WI-Fi icon is also fixed, and it worked in the opposite direction
Slightly increased the size of the icons in the blind
Bluetooth Manager code from stock 352 firmware(was from 223)
Optimization: removed about 120 unused icons from system applications
Fixed: incompatibility with some programs (for example, Slack, Timely, Outlook)
Fixed (possibly): some problems after upgrading to a new firmware
Fixed: Lockscreen was not displaying a location
Fixed: there was no animation to clear memory
2018/06/09
Changed the size of the curtain icons to the size of ZenUI 5.0, the animation of curtain icons from ZenUI 5.0
Ported a lot of smaly-code with Zenfone 3, Zenfone 4, Zenfone 5, various optimizations for prog and frameworks
With ZenUI 5.0: Notification in the volume panel about the mode do not disturb, notice with an explanation of what mode is On the street
Increased interface performance
Ported / replaced a lot of prog programs with ZenUI 5.0 and Android 7.0+: Clock, Asus Launcher (AppLock work fixed), SuperNote, Weather, Calculator, Voice recorder
Updated some programs to the latest versions, including Page Marker
Ported audio services, the Audio Configuration Wizard (now called Master Audio) with Android 8.0
Reduced the consumption of RAM (or it seemed?)
Increased free space in the system partition
Partially updated interpreter ARM to x86-houdini
Added two wallpaper from Zenfone 5, adapted for our resolution
Fixed: on the lock screen, notifications sometimes overlay on clock
Fixed: operation of Additional BORETS ROM settings on Magisk 16.3-16.4
Fixed: did not show the firmware release date for SELinux Enforcing
Fixed: there were 15 steps of volume instead of the declared 25 on devices with a top processor Z3590 (Zenfone Zoom ZX551ML, Zenfone 2 ZE551ML Deluxe)
Other
Note: there is something changed in the lancher and at DPI from 440 to 401 there are 5 icons in the dock-bar instead of 7, even if you use the 7-icon launcher, this is not a firmware error
2018/05/24
Probably eliminated the problems with the operation of memory cards (asked some to format, now, like, it will be ok)
In the settings added details for donate (note, I now have another card of the Savings Bank). The future depends on the support
Updated many prog to up-to-date versions, including Google Maps
Added Facebook Messenger installer
Returned the sink thresholds for the video card
I returned the stock governor Interactive with some corrections
The governor of Hotplug has been reworked (now there is only one kernel running at rest, not two, some changes and fixes in the code)
Added governor Hybrid (works somewhat incorrectly, only three cores of 4x work)
Fixed: did not show the firmware release date
Other (forgot already)
2018/03/18
The NTFS format now works for both read and write (SELinux Permissive is required, as before). Unfortunately, now the manufacturer of the memory card and flash drives is not defined via OTG, in third-party file managers and settings the memory card will be as sdcard1, and OTG flash drive as usbcard.
Google sms now does not force closed out the appeared item "Blocked contacts" due to partial porting of one of the APIs with Android 7.1.1
Launcher updated to version 4.5.3.5 with Android 8
A lot of code is ported from 7.1.1
Compiled several more libraries and services from the new AOSP sources
Updated many programs to current versions
Cut out Photo Collage
Now, if you have not fulfilled the requirements for the presence of root and confirmation of it for the "SystemUI" and the program that asks for it during the Asus Customized settings, most of the items in the " BORETS ROM extra settings" will be empty
Fixed: the number of icons in the lancher did not work
Fixed: Turbo VPN client (with rabbit) and SplashTop did not work (I'm not sure that my merit, maybe, the developers fixed this program)
Other
2018/02/13
Fixed: phone did not start after wipe
Fixed: in the gallery did not work cloud storage - there was a flight
Fixed: the menu "For developers" was not displayed
In Asus customized settings added an item to select the camera application: 4.0.26 (Zenfone 4) or 3.0.55. After each application change, the software will be rebooted and you will need to re-configure
Updated Google Play Services to version 12.2
Updated camera patch for Zenfone Zoom ZX551ML and decrease it ZIP size. If the patch does not update, then on the Asus Zenfone Zoom ZX551ML get the force close gallery!
2018/02/11
The clock and weather widget on the ZenUI 4 lock screen, added the location there (in its native Zenfone 4 widget it is not)
Ported Asus Camera 4.0.26 with Android 7.0+. There is a drawback: after each exit from the program by clicking the "Back" button, restarting the phone or stopping the camera process, when you re-enter requests to enable / disable location tags, use the "Home" button or the last applications menu
Ported a lot of code with Zenfone 3 6.0.1 and Zenfone 4 7.1.1
Ported Asus Mobile Manager with Android 7.0+
A new view of the energy-saving mode with Asus Zenfone 4 (provided that the Asus Mobile Manager is not frozen)
Ported the gallery with Android 8.0
Information about the processor model in the settings, information about the release date of the firmware
Many progs have been updated to the latest versions
Several unused programs were removed (Contact dark theme, wifi dongle, etc.)
Other
February 12th is my birthday
2018/01/29
Updated the dialer&contacts to the version with android 8.0(New dialer support call log backup and fullscreen outcall photo), updated the clock, Asus Demo
Fixed: the claimed grid adjustment was not displayed in the application menu
Fixed: did not work the point of change of network signal icons
Fixed: some forms and spinners in the dark theme were unreadable (white on white)
Many unused files were deleted
2018/01/27
Compared with the previous version, now the settings are saved, except for the default tunes (they will be reset to default ones). If you decide to make a wipe of the internal memory after installing the firmware, then it must be reinstalled, otherwise the part of the functional will not work /
The performance has been increased to the sink level (the Antutu score is 65000-68000 depending on the governor), but now the application optimization will be as long and the internal memory will decrease by approximately 400 MB, as a stock ROM
After installing the firmware, TWRP will be replaced with the latest 3.2.1
The kernel is patched under Magisk 15.3, that is, if you had it, then when you install the firmware without wipes, the root will remain
???Modified Asus Launcher with Android 8.0, in addition to the usual fashion, returned the ability to separate the grids in the application menu and on the desktop??? I cleared launcher data- grid settings lose from app menu
Switch between 5 and 7 icons in Dockbar on the fly with saving all settings (Asus customize settings-select Asus Launcher, requires root)
Updated Google Play services and other programs to the newest versions
Removed Asus MicroFilm
Fixed: the code did not work. 4636 # *
Fixed: aircraft wing in quick settings panel
Fixed: launcher choice by default
Almost completely corrected dark theme (except the WPS window and the spinner in the Memory item)
Added a pack of live wallpaper, in which various effects due to the motion sensor
Other
How to install:Required TWRP 3.0.2 and newer, MM bootloader
1. Put archieve to phone or SD card memory
2. Reboot to TWRP
3. Disable Zip signature verification
4. Click Install>choose ROM
Link to ROM: https://drive.google.com/drive/fold...ourcekey=0-VoEw28BAMsxGQT7aRFW7rQ&usp=sharing
How to ROOT, xposed install:1. My kernel in this ROM patched Magisk v16.4
Link to Magisk which compatible with our device: https://drive.google.com/drive/fold...ourcekey=0-TFjEkKDWZMJYe3CYx6Ksdg&usp=sharing
If you want SuperSU
Link to SuperSU which compatible with my ROM:
SuperSU for 6.0.1 - Google Drive
drive.google.com
If you have bootloop after xposed you should remove other xposeds and try thishttps://forum.xda-developers.com/showpost.php?p=71211038&postcount=215
XDA:DevDB Information
BORETS ROM Stock Edition, ROM for the Asus ZenFone 2
Contributors
BORETS24
Source Code: https://github.com/BORETS24/Marshmallow-kernel-for-Asus-Zenfone-2-ZE551ML-ZE550ML
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Created 2017-02-05
Last Updated 2019-08-16
Very Nice! Downloading to test ^^
Good job my friend
pre rooted and xposed installed?
ayush.gl said:
pre rooted and xposed installed?
Click to expand...
Click to collapse
No, kernel prerooted. It have patched sepolicy, init.supersu.rc etc inside boot.img but if you have not installed SuperSU and su binary you can not get root access. need flash SuperSU 2.79SR3 from my link and then install xposed from my link too
thanks @BORETS24 , one more thing can you modify systemui to get gradient in status bar, i mean some darker status bar.
---------- Post added at 11:53 PM ---------- Previous post was at 11:49 PM ----------
i'm having one big problem with every stock mm rom that whenever i receive any phone call or i make any call the screen becomes unresponsibe. i'm having this issue with mm bootloader, on lp bootloader everthing works fine. does anyone have the fix, plz tell me
ayush.gl said:
thanks @BORETS24 , one more thing can you modify systemui to get gradient in status bar, i mean some darker status bar.
---------- Post added at 11:53 PM ---------- Previous post was at 11:49 PM ----------
i'm having one big problem with every stock mm rom that whenever i receive any phone call or i make any call the screen becomes unresponsibe. i'm having this issue with mm bootloader, on lp bootloader everthing works fine. does anyone have the fix, plz tell me
Click to expand...
Click to collapse
System UI and Document
ayush.gl said:
thanks @BORETS24
i'm having one big problem with every stock mm rom that whenever i receive any phone call or i make any call the screen becomes unresponsibe. i'm having this issue with mm bootloader, on lp bootloader everthing works fine. does anyone have the fix, plz tell me
Click to expand...
Click to collapse
which sibling region of your device: WW or CN?
i'm from india and i'm using ww firmware @BORETS24
Rom seems great performance wise. Gonna test the battery through tomorrow
Thanks for rom,I hope for future Magisk full support becouse new RussianBear rom works with magisk and 31/01 kernel
Sent from my ASUS_Z00AD using XDA Labs
samuele94 said:
Thanks for rom,I hope for future Magisk full support becouse new RussianBear rom works with magisk and 31/01 kernel
Sent from my ASUS_Z00AD using XDA Labs
Click to expand...
Click to collapse
YEs, my 31/01 is "pure" kernel therefore you can install magisk, but if install it in my rom you lose part of functions. ..
I don't see why need magisk. I have root and Xposed 86.6 from link from first post which no need magisk and all working fine. I hear that magisk need for Pokemon? But I not like this stupid game,sorry
Can we disable SIM 2 and SIM 1 on the settings? I'm sorry, I forgot how marshmallow is.
Thanks
BORETS24 said:
YEs, my 31/01 is "pure" kernel therefore you can install magisk, but if install it in my rom you lose part of functions. ..
I don't see why need magisk. I have root and Xposed 86.6 from link from first post which no need magisk and all working fine. I hear that magisk need for Pokemon? But I not like this stupid game,sorry
Click to expand...
Click to collapse
I use magisk only for xposed 87. 0 systemless. {I hate Pokemon Go)
If you have xposed please, send screenshot about xposed status
Sent from my LG-D802 using XDA Labs
samuele94 said:
I use magisk only for xposed 87. 0 systemless. {I hate Pokemon Go)
If you have xposed please, send screenshot about xposed status
Sent from my LG-D802 using XDA Labs
Click to expand...
Click to collapse
I'm using Xposed, link I give in first post this thread
z008 using the same download link?
chteh0721 said:
z008 using the same download link?
Click to expand...
Click to collapse
May you read header of thread one more time? There you can see this word "for ZE551ML/ZE550ML". Rom is universal for both. Z008=ZE550ML, right?
How did you do the "mass storage" mode ?
agm2112 said:
How did you do the "mass storage" mode ?
Click to expand...
Click to collapse
By editing services.jar, AsusSettings.apk + compile "special" kernel
BORETS24 said:
May you read header of thread one more time? There you can see this word "for ZE551ML/ZE550ML". Rom is universal for both. Z008=ZE550ML, right?
Click to expand...
Click to collapse
Just to double confirm, cheers
Sent from my ASUS_Z008D using XDA-Developers Legacy app
jk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Aurora ROM
DOWNLOAD LINKS:
Aurora ROM V42 (Based on H2OS BETA22) Link: PAN-Baidu | Password : mvoh
Aurora ROM V41 (Based on H2OS 3.5) Link: PAN-Baidu | Password : toc8
Aurora ROM V39 (Based on OOS 4.1.7) Link: PAN-Baidu | Password : jscv
Aurora ROM V38 (Based on H2OS Beta 20) Link:Mega Link | Mediafire Link
Aurora ROM V29 (Based on H2OS Beta14) Link: PAN-Baidu | Password : nchl
Aurora ROM V28 (Based on H2OS Beta13) Link: PAN-Baidu | Password : eo8j
Aurora ROM V27 (Based on OOS Beta17) Link: PAN-Baidu | Password : laep
Aurora ROM V26 (Based on H2OS Beta12) Link: Mega-Link
Aurora ROM V25 (Based on H2OS Beta11) Link: G-Drive LINK
Aurora ROM V24(Based on OOS 4.1.3) Link: G-Drive LINK
Aurora ROM V23 (Based on OOS Beta13) Link: Mirror-1 Link | Mirror-2 Link[V4A and DSP audio options Included]
Aurora ROM V22.1 (Based on H2OS Beta10-2nd Edition) Link:G-Drive Link | Mirror-1 Link | Mirror-2 Link
Aurora ROM V22 (Based on H2OS Beta10) Link: Mirror-1 Link | Mirror-2 Link
Aurora ROM V21 (Based on OOS 4.1.0) Link: G-Drive LINK
Note: Aroma Installer is in Chinese.. to use it in English Replace aroma-config file with this aroma-config | aroma-config for v23 in the rom zip inside rom.zip\META-INF\com\google\android directory
HOW TO DOWNLOAD FROM PANBAIDU WITHOUT REGISTRATION AND WITH IDM VIDEOGUIDE HERE
Aurora English Settings:
Aurora English Settings v2.1 (for Aurora v21): Aurora Settings v2.1
Aurora English Settings v1.0: Aurora Settings v1.0
Previous Builds:
Aurora ROM V20 (Based on OOS B12 7.1.1) Link: MEGA LINK
Aurora ROM V19.1 (Based on h²os Beta9 7.1.1) Link:G-Drive Link
Aurora ROM V18.1 (Based on H2OS 3.0) Link: G-Drive Link
Aurora ROM V17 (Based on OOS4.0.3) Link: G-Drive Link
Aurora ROM V16 (Based on Beta11) Link: G-Drive Link
Aurora ROM V14 (Based on OOS4.0.1) Link: PAN BAIDU LINK | Password: by1e
Features:
Based on the latest 0426 official, Android 7.1.1, oxygen OS OPEN15 bottom bag production.
The status bar interface and multitasking memory card default display units instead GB, MB, and can be customized to select GB (V27.0).
The latest update goggles (V27.0).
New features enhance the desktop Select Settings (AOSP and hydrogen, the default is the official AOSP) (V27.0).
Add the number of drop-down icon column customization (2-8) (V25.0).
Add GoHost, since the election will brush into the brush GOOGLE package, direct GG, eliminating VPN trouble (V25.0).
Streamlining application updates APP (V25.0).
Add all the features of V24 to the latest development version (V25.0).
Add black gesture vibrating alert (V24.0).
The default screen is modified to 420DPI (V24.0).
The default desktop layout changed to 5x4 (V24.0).
Re-add features (V24.0) Dev added oxygen packet creating the stable bottom.
Brush V4A and new DSP sound options (V23.0).
Multi-task interface information and support for adding memory switch (V23.0).
Add desktop calendar display and supports switch (off by default, restart to take effect, V23.0).
The latest official update package to solve the end-of-memory problem (V22.1).
Back from boot manager (Settings -> Applications, V22.1).
Update SUPERSU-2.79-SR4 management program (V22), and built-ROOT (Shuangqing not lost).
Brush machine file to add MD5 file, set the ROM's ZIP same name suffix MD5 files copied together to the SD card, will automatically proofread MD5 brush machine, so avoid downloading or copying process leads Brush ROM file error variety of abnormalities caused (if Brush proofreading instructions appear in red failed re-download or copy) ( V22 ).
Adjustment of status bar button functions to remove the original virtual background color (OCD tyranny, when set to capture V22 ).
As the official update of the new Launcher (added DOCK district), which added a number of icons DOCK Zone Custom Functions ( V22 ).
Fine-tuning the upper-right status bar icon position and spacing (V22).
New ku Ritz Pro font ( thanks @ quiet rain elaborate Great God, V22 ).
New applications disable / enable function ( V22 ).
Add Lanting black, Lanting black fine, Ping Fang, letter black, quasi-circular section 5 font (thanks @ quiet rain elaborate great God, the great God can test specific post) (V21.0).
Add the drop-down calendar display and supports switch (V21.0).
Add operator locks the screen display switch (V21.0).
Add custom lock screen text, support for emoji (V21.0).
Replace Shot on OnePlus APP official offer (V20.0).
Of restoration after the completion of part of the oil brush card wizard (after the carefully check the MD5, try to use the post in REC Shuangqing into the brush ha) (V19.1).
Repair some font display abnormal problems (V19.1).
Desktop split the ranks of independent set (V19).
Modify pesticide mode modification method, compatibility will be slightly better (V19).
New boot to restart direct fingerprint to unlock (V19).
New fingerprint to unlock vibration switch (V19).
Desktop Lunar support independent display switch (V19).
New goggles (V19).
New screen assistant (V19).
Long shots back public beta (default) (V18).
WIFI password to view the new features (V17).
New pesticide mode (king of glory may open high frame mode), set up after the completion of the restart to take effect (V17).
You can not enter the patch (V16) after repair oxygen OS 14.0 power-on password.
Add several new fonts (V15).
Add a variety of transition animation style switch (V15).
Repair Lunar lock screen display problems (V15).
Global DEODEX of, for the first time after boot Shuangqing time slightly slower.
Lite comes with a large number of official applications.
Perfect ROOT privileges (when prompted, if not complete Brush ROOT, installation SUPERSU please the 54).
Add BUSYBOX support.
When prompted to install third-party verification to remove APK.
Enabled by default install unknown source.
Add GOOGLE perfect frame (GMS select the brush into the brush machine, please double clear if the invalid can).
Adding titanium backup and RootExplorer, and may be required when the selected brush into the brush.
Support for custom power button menu style (official or traditional style, the default is the traditional style).
Traditional support Advanced Power key menu custom menu items to support the project are: off / flight mode / restart / Screenshot / flashlight / screen recording .
Extended restart function key to Senior 4: Normal restart / reboot fast / Bootloader / Recovery.
Add status bar week display, and support for custom switching.
Add status bar displays speed, and support for custom details, such as color / font size.
Advanced battery status bar add custom features, there are 60 kinds of styles optional third-party battery mode.
Add linear battery status bar at the top display, and supports custom details.
Add status bar left and right in a virtual three-button, and support for custom switch and set short and long presses function.
Double-click the status bar to add off-screen display.
Add Lunar lock screen display switch.
Add flash function calls, and customize profiles and different frequencies.
Add the message list to show ownership (support operator display), and support for custom switching.
Add the dial pad attribution display, and supports display operators.
Modify the official call records to show ownership and add operator information.
Modify the official call interface to show ownership and add operator information.
Updated with the latest operating business segment data.
Adding DPI setting function (ROOT required), set up after the completion of the restart to take effect.
Fine-tune the official date display lock screen font spacing .
The status bar add significant time in seconds, and support a separate switch.
The status bar displays the time switch.
The status bar show the custom time (left, center, right, right-default), make the appropriate adjustment of other display items when centered, to avoid overlap.
The status bar icon shows the alarm switch.
The status bar icon shows the Bluetooth switch.
The status bar displays immersive, more detail settings, non-XPOSED realize ( thanks to Samsung's U-52 Costa Rica ).
The status bar operators add custom information display function (blank automatically hide), support for custom detail (fonts, colors, etc.).
Adding memory status bar displays (available on a behavior, the behavior of all the next), support for custom detail (fonts, colors, etc.).
Added status bar displays, while supporting custom detail (fonts, formatting, colors, etc.).
Automated attendant increases (provided only allow the headset and the Bluetooth module, allows custom automatic answer delay).
Add three fingers, customized vertical slide (Aurora disposed go -> reinforcing arrangement is provided to the three-finger sliding function).
Add swipe gesture from the left edge of the screen down four intermediate customization (default lock screen), the number of custom support finger (2/3/4 means that the default is 3).
Addition signal selector switch positions (left, right).
Increase desktop layout Custom (3x3-6x6) a variety of optional.
Increasing the size of the desktop icon customization (default 112 480DPI), DPI reduced while the icon size can be increased.
Adding key customization features (multi-tasking / HOME / return three-button press / double-click can be), if you set a custom button in the official system settings customization, the aurora automatically lapse. As long as the official custom set free to use aurora key functions.
Add black field switch (black field after opening Perform enhancement settings provided Aurora settings).
New font switching function, thanks to the "small light" production sharing fonts.
Custom key and navigation bar Virtual key Optional function:
Off screen, shutdown menu, return key, HOME key, recent task key, menu key, search key, end current process, turn on / off flashlight, screenshots, open custom APP , Pull down the status bar, WIFI switch, mobile data switch, Bluetooth switch, select APP to perform (automatically record the last item).
[On the Built-in applications]
ROM integrates a small amount of third-party APP, but they can be freely uninstalled by the user (not integrated in the SYSTEM, and ordinary installation of APP is no different), if you like this ROM and support us, please Activated after use (if you think APP good, of course, you can keep using) and then uninstall.
Source:onplusbbs.com
Magisk Installer for Aurora ROM (OOS/H2OS Based ROMS)
I have created Aroma Installer zip by which you can install Magisk Systemless SuperSU & SafetyNET easily and it will remove the existing SuperSU completely.
This Installer will support all OOS/H2OS based ROMS.
I have added latest Youtube apk with AD-BLOCK and BACKGROUND PLAY option if you want you can install that.
This youtube apk contains all the libs which are required for youtbe 360/cardboard videos.
Magisk Installer UPDATED: Aurora Magisk Installer for OP3
Download link not working
nokia_16 said:
Download link not working
Click to expand...
Click to collapse
just use the password given...
Soon will upload the mirror links
Wrong section? Move to dev.
Will there also be a OOS 4.0.2 version? 4.0.1 seems a bit outdated.
ROM sounds pretty great though.
Hoping for 4.0.2.
MarcTremonti said:
Will there also be a OOS 4.0.2 version? 4.0.1 seems a bit outdated.
ROM sounds pretty great though.
Hoping for 4.0.2.
Click to expand...
Click to collapse
You have some half info brother.He has released beta 11 version.
beta 11 is actually 4.0.2 named in public release
infact it has extended ss that 4.0.2 doesnt have.
can u do better download links or mirrors
The ROM seems to be really good but can you (please) do better mirror like AFH ?
wait for mirror
Mirror plz
Is It possible run the Aurora control app in another op11 based rom?
gelomc said:
Is It possible run the Aurora control app in another op11 based rom?
Click to expand...
Click to collapse
Yes but it won't do anything since changes are all in framework and SystemUI. App is only to control them.
Mirror of the link plz ?
Sent from my ONEPLUS A3003 using Tapatalk
Any link but Baidu it will be great. Thank you.
Any real screen shots available? Cheers!
innocentwoolf said:
just use the password given...
Soon will upload the mirror links
Click to expand...
Click to collapse
Well done but if u pls add download link of smartisan*os (android 7.0)*then its very much helpfull to us.Its very interesting rom.pls add the link,we cant.
Pls provide alternative link
abhianand525 said:
Mirror of the link plz ?
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
G-drive link updated
innocentwoolf said:
G-drive link updated
Click to expand...
Click to collapse
Got it.
Thanks for this ?
Sent from my ONEPLUS A3003 using Tapatalk
WELCOME TO THE SNAPPATCH
INTROUnleash Your Snapdragon AOSP OS on a unexpected Way
The Snappatch isn't a Mod or a Tweak, it's a Custom ROM without including the OS Parts. Or in other Words, a POM. The Snappatch is the 4th Revision of the POM, containg the knowledge of researching and testing on over 8 Android Versions, over 20 Devices, or just 8 Years if You want so. The Goal is to set the Quality of everything as high as possible. Part of that is enabling Services, the Optimization of Hard and Software Configurations, and deep going Changes under the Hood which You will find nowhere else in such a big and goodworking Combination. Copied, but never reached! Forget obsolete or not working Modules and Tweaks, forget Audio Mods and Viper! The Snappatch contains only really working Content, and Options that You need and maybe not even knowed about. Take a closer look on the Thread and the Website for more Informations. But Words can't explain the Magic, You've to expierence it...
CONTENT
SNAP AROMA 3
SNAP OPEN GAPPS
SNAP SUPERSU
SNAP MAGISK
SNAP BUSYBOX
SNAP PROP PATCH
SNAP AUDIO SYSTEM
SNAP AUDIO EXTRAS
SNAP SOUND EXTRAS
SNAP DEVICE TRANSFORMATION
AND A LOT MORE
SNAP MEANS THAT THE USED CONTENT IS CHANGED, CUSTOMIZED, CREATED AND/OR OPTIMIZED BY MIUSTONE. TAKE A LOOK ON THE CREDITS IF YOU WANT TO THANK SOMEONE
FEATURES
SAFETYNET PASSING AND SECURE
TESTED AND SUPPORTED BY MIUSTONE
ANDROID FOR WORK READY AND OPTIMIZED
UNLOCKED AND ENABLED 4K AND HDR PLAYBACK
UNLOCKED AND ENABLED GOOGLE PIXEL FEATURES
BETTER RENDERING HANDLING AND GAMING EFFICIENCY
ENABLED HIGHER AUDIO QUALITY AND VARIOUS SERVICES
ENABLED HIDDEN ANDROID AND QUALCOMM FUNCTIONS
PORTED VARIOUS FEATURES AND CONTENT FROM SNAPDRAGONS
SMOOTHER AND SILKIER SCROLLING AND RESPONSIVENESS
VARIOUS STORAGE AND INDEXING SERVICE OPTIMIZATIONS
ENABLED DEVICE SERIAL NUMBER IN ABOUT PHONE
ENABLED SCREEN ROTATION ON SETUP WIZARD, HOME AND LOCKSCREEN
ENABLED VARIOUS FUNCTIONS FOR MORE OPTIONS IN THE GOOGLE SETTINGS
VARIOUS BACKGROUND BASIC SERVICE HANDLING OPTIMIZATIONS
AND SO MUCH MORE WHICH DOESN'T FITS IN MY WORDS
SNAP GAPPS
OPENGAPPS SUPER
HEAVILY DEBLOATED
BARELY MINIMUM SET
FULL FUNCTIONALITY
EXTRA SERVICES
PIXEL STYLE
SNAP AUDIO
THE SNAP AUDIO SYSTEM OPTION IS BASED ON A ADVANCED SONY SOUND ENHANCEMENTS PORT
INCLUDING THE LATEST SONY XPERIA LIBRARIES AND AUDIO CONFIGS AS REPLACEMENTS
OPTIMIZED FOR STEREO SPEAKERS BESIDES SUPPORTING DIFFERENT HEADSET TYPES AND OPTIONS
NOT JUST ANOTHER AUDIO MOD
TRUST YOUR EARS
NOT YOUR EYES
CREDITS
amarullz for AROMA
Chainfire for SuperSU
topjohnwu for Magisk
YashdSaraf for BusyBox
OpenGApps for GApps
EmojiOne for free Emojis
AND OF COURSE THANKS TO XDA AND ALL USERS AND DEVS WHO HAVE CONTRIBUTED TO ANDROID AND THIS PROJECT
IF YOU WANT TO SUPPORT MY PROJECTS
BECOME A PATRON
XDA:DevDB Information
SNAPPATCH, Tool/Utility for the ZTE Axon 7
Contributors
Miustone, Miustone, Miustone, Miustone
Version Information
Status: Beta
Current Beta Version: 18.4.4 BEASTMODE
Beta Release Date: 2018-04-04
Created 2018-02-15
Last Updated 2018-04-13
Instructions:
-Format Data / Disable Encryption (Backup Your Files to a External Storage before)
-Wipe Data, System and Caches (If You don't want to face Issues after Patching)
-Flash Oreo AOSP (Avoid booting the System before the Patch is applied)
-Reboot Recovery (Make sure Your Device isn't charging to keep the heat low)
-Flash Patch (Do Your thing, choose what You want but follow this Instructions)
-Reconnect Charger (No worries, it will not burn like a Note 7)
-Reboot System (Let it charge till 100% to get the Battery Calibration)
(The POM may exit to the Recovery while flashing, please repeat the Instructions from the second Step and make sure Your Device isn't getting hot before starting the Patch. AROMA has Performance Problems with TWRP, this can only be avoided on this Way)
Officially Supported Devices:
-Axon 7
(You want Official Support for Your Device? Talk to @Miustone)
Custom Prop:
If You want to change some Settings like for the Rotation of the Homescreen, Lockscreen, Setupwizard
or more advanced Things, can You simply use a File called "snap.prop" from Your Internal Storage using the Custom Prop Option within the Patch.
All You need to do is extracting the default Prop File from META-INF\com\google\android\aroma\snap\patch\prop. Place the file on the Root of Your Internal Storage,
and make sure TWRP has Access to it. Make Your changes and flash it using the Snappatch. That's all. As addition can You use "!#" to remove all Lines containing "#",
or remove anything You want by using "!anythingyouwant" (First example exists on the default Prop). The next is the Backup. Give it a yes, YES or just y or Y to make a backup
of Your current build.prop. Use NO, no, n or N to skip the Backup Function. If You want to know more just ask Me!
Kernel Tipps:
-Disable Touchboost on all Cores
-Underclock Your Cores to Max. 2GHz and 1,4GHz (Big - Little)
-Set the CPU Governors to Interactive and Conservative (Big - Little)
-Set the GPU to Max. 401MHz
-Set the I/O Sheduler Read-Ahead to 1024kB (Internal)(External may be slower = 512kB)
Developer Settings:
-Set Chrome (Beta, Dev, Canary) as Webview and access chrome://flags for more Options
-Set All Animation Scalings to 1.0 or 1.5
-Set "Forced Resizing of all Activities" to On
-Set "Allow External Storage using by Apps" to On
Download:
SNAPPATCH WEBSITE
If You want to support Me, take a look on the Info Section on the Website and/or consider sharing the Patch on Social Media and/or XDA!
Hello again! I just decided to create a Thread after sharing My latest Patch somewhere else, and getting Questions about it. It is good to use on 8.1 but keep in mind it is a Beta! No Bugs at all, but some Things may be not final or something will be added or removed on the final Release. The Beta will come all few Days, the Releases will come every first of the Month. And now happy flashing!
I'm having trouble understanding what this is exactly. Is this like an all in one flash file for AOSP ROMs so we don't have to run all the commands separately? Is this just for AOSP Oreo or does this include Nougat ROMs as well?
Thanks, works great on AEX Oreo 5.2 ROM.
ibphantom said:
I'm having trouble understanding what this is exactly. Is this like an all in one flash file for AOSP ROMs so we don't have to run all the commands separately? Is this just for AOSP Oreo or does this include Nougat ROMs as well?
Click to expand...
Click to collapse
It is mostly to compare with a AROMA based Custom ROM. While a custom ROM contains a Firmware/OS is the Patch just containing the changes i would usually made, plus even more since the Patch System is giving more Options as a simple ROM. I started with Miui Ports over to Stock ROMs, but i see more potential is AOSP, since it delivers the latest Android Versions even for Devices with bad/slow/stopped OEM Update Support besides providing a more unified Base to work with. The Snappatch is already the 4. Version of the Patch System and is specially made for Flagship Snapdragons (820+) running Oreo. Nougat isn't supported anymore, same for Stock, but i always recommend to try it out. If it does not Bootloop or gives tons of FCs, should it be fine to use on Your favorite ROM. Hope that explains it a bit better as i did it before. My English isn't that good to create complex Texts, sorry for that! :silly:
Always available for more Questions! BR
@BrianTeague glad it works well for You! Hope You'd enjoy it
not for android N, right?
xboxbr said:
not for android N, right?
Click to expand...
Click to collapse
The post right above yours...
"Nougat isn't supported anymore, same for Stock, but i always recommend to try it out. If it does not Bootloop or gives tons of FCs, should it be fine to use on Your favorite ROM"
xboxbr said:
not for android N, right?
Click to expand...
Click to collapse
Cablespider said:
The post right above yours...
"Nougat isn't supported anymore, same for Stock, but i always recommend to try it out. If it does not Bootloop or gives tons of FCs, should it be fine to use on Your favorite ROM"
Click to expand...
Click to collapse
Right, besides of the Kernel and the GApps should everything flash flawless, but if You face issues out of Oreo will they not getting fixed. Feel free to try it with any OS (MIUI, Stock, Nougat AOSP) and Share Your expierence Here. I'm sure that would Help others...
BR
BrianTeague said:
Thanks, works great on AEX Oreo 5.2 ROM.
Click to expand...
Click to collapse
Bro can you link me to this rom? Is it for axon 7? Thanks
And thanks for this patch man gonna give it a try then post back :3
J0nhy said:
Bro can you link me to this rom? Is it for axon 7? Thanks
And thanks for this patch man gonna give it a try then post back :3
Click to expand...
Click to collapse
It's on the AEX thread over at the ROMs section, not too hard to find it
J0nhy said:
Bro can you link me to this rom? Is it for axon 7? Thanks
And thanks for this patch man gonna give it a try then post back :3
Click to expand...
Click to collapse
Over here - https://forum.xda-developers.com/axon-7/development/rom-aospextended-rom-v4-3-t3618950
AEX (AOSP Extended)
You are welcome!
Miustone said:
UNLOCKED AND ENABLED GOOGLE PIXEL FEATURES
BETTER RENDERING HANDLING AND GAMING EFFICIENCY
ENABLED HIGHER AUDIO QUALITY AND VARIOUS SERVICES
ENABLED HIDDEN ANDROID AND QUALCOMM FUNCTIONS
PORTED VARIOUS FEATURES AND CONTENT FROM SNAPDRAGONS
Click to expand...
Click to collapse
Would you elaborate on these?
This patch did not solve the echo issue on calls for me, on AEX Oreo, but I would appreciate receiving feedback from others who have installed this, to confirm.
Thanks!
In case anybody is wondering, here are the build.prop modifications that this patch adds:
Code:
af.fast_track_multiplier=1
af.resampler.quality=5
assertdisplay.value=128
audio.adm.buffering.ms=5
audio.deep_buffer.media=true
audio.dolby.ds2.enabled=false
audio.dolby.ds2.hardbypass=false
audio.ds1.metainfo.key=273
audio.heap.size.multiplier=1
audio.hifi_rec.concert_gain=-100
audio.hifi_rec.concert_lcf=0
audio.hifi_rec.concert_lmt=0
audio.hifi_rec.normal_gain=30
audio.hifi_rec.normal_lcf=75
audio.hifi_rec.normal_lmt=0
audio.hifi_rec.offset_gain=40
audio.legacy.postproc=true
audio.noisy.broadcast.delay=600
audio.offload.16bit.enable=1
audio.offload.24bit.enable=1
audio.offload.32bit.enable=1
audio.offload.buffer.size.kb=1024
audio.offload.disable=0
audio.offload.gapless.enabled=true
audio.offload.min.duration.secs=30
audio.offload.multiaac.enable=true
audio.offload.multiple.enabled=true
audio.offload.passthrough=true
audio.offload.pcm.16bit.enable=true
audio.offload.pcm.24bit.enable=true
audio.offload.pcm.32bit.enable=true
audio.offload.pcm.enable=true
audio.offload.pstimeout.secs=5
audio.offload.track.enable=true
audio.offload.video=true
audio.parser.ip.buffer.size=262144
audio.safx.pbe.enabled=true
audio_hal.period_size=192
av.offload.enable=true
av.streaming.offload.enable=true
bt.max.hfpclient.connections=1
camera.aux.packagelist=org.codeaurora.snapcam,com.qualcomm.saltproject,com.qualcomm.saltproject2
camera.disable_zsl_mode=0
camera2.portability.force_api=1
com.qc.hardware=1
com.sonymobile.dseehx_enabled=true
config.foss.path=/system/etc/FOSSConfig.xml
config.foss.xml=1
dalvik.vm.appimageformat=lz4
dalvik.vm.build-mode=smart
dalvik.vm.dex2oat-swap=true
dalvik.vm.dex2oat-thread_count=4
dalvik.vm.dexopt-flags=v=y,o=y,m=y
dalvik.vm.image-dex2oat-filter=smart
dalvik.vm.isa.arm.features=default
dalvik.vm.usejit=true
dalvik.vm.usejitprofiles=true
dalvik.vm.verify-bytecode=true
db.log.slow_query_threshold=100
debug.bt.discoverable_time=0
debug.composition.type=gpu
debug.drm.mode.auto=1
debug.drm.mode.force=3840x2160
debug.egl.hw=1
debug.egl.swapinterval=-1
debug.enable.gamed=1
debug.enabletr=true
debug.gralloc.enable_fb_ubwc=1
debug.gralloc.enable_fb_ubwc=1
debug.hwc.force_gpu=1
debug.mdpcomp.maxlayer=4
debug.qc.hardware=1
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
debug.qualcomm.sns.daemon=i
debug.qualcomm.sns.hal=i
debug.qualcomm.sns.libsensor1=e
debug.sf.enable_hwc_vds=1
debug.sf.hw=1
debug.sf.hwc.canUseABC=1
debug.sf.latch_unsignaled=1
debug.sf.no_hw_vsync=0
debug.sf.nobootanimation=0
debug.sf.swaprect=1
dev.defaultwallpaper=/system/snap.jpg
dev.pm.dyn_samplingrate=1
dev.pm.gpu_samplingrate=1
dmid=-1286820014
doze.pulse.brightness=15
doze.pulse.delay.in=500
doze.pulse.duration.in=1000
doze.pulse.duration.out=1000
doze.pulse.duration.visible=3500
doze.pulse.notifications=1
doze.pulse.proxcheck=1
doze.pulse.sigmotion=1
doze.shake.acc.threshold=100
doze.use.accelerometer=1
doze.vibrate.sigmotion=0
drm.service.enabled=true
flac.sw.decoder.16bit.support=true
flac.sw.decoder.24bit.support=true
flac.sw.decoder.32bit.support=true
hdr_capable=1
htc.audio.hdaudio.videoplayback=1
htc.build.stage=2
htc.scanrecorder=1
hw.cabl.level=Auto
hwui.render_dirty_regions=true
lockscreen.rot_override=true
log.tag.launcher_force_rotate=VERBOSE
lpa.encode=true
lpa.releaselock=true
lpa.use-stagefright=true
media.aac_51_output_enabled=true
media.mediadrmservice.enable=true
media.stagefright.audio.sink=280
media.stagefright.enable-aac=true
media.stagefright.enable-http=true
media.stagefright.enable-player=true
media.stagefright.enable-qcp=true
media.stagefright.enable-scan=true
mm.enable.qcom_parser=760765
mm.enable.qcom_parser=760765
mm.enable.smoothstreaming=true
mm.enable.smoothstreaming=true
mmp.enable.3g2=true
mpq.audio.decode=true
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.tethering.noprovisioning=true
persist.adb.notify=1
persist.af.fast_track_multiplier=1
persist.af.resampler.quality=5
persist.android.strictmode=0
persist.audio.aov=ON
persist.audio.dirac.speaker=true
persist.audio.dual_audio=ON
persist.audio.dualmic.config=true
persist.audio.fluence.audiorec=true
persist.audio.fluence.speaker=true
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicecomm=true
persist.audio.fluence.voicerec=true
persist.audio.handset.mic=digital
persist.audio.heap.size.multiplier=5
persist.audio.hifi.int_codec=true
persist.audio.hifi=true
persist.audio.hifi_adv_support=1
persist.audio.hifivoice=true
persist.audio.hp=true
persist.audio.lowlatency.rec=true
persist.audio.ns.enabled=ON
persist.audio.ras.enabled=true
persist.audio.ssr.3mic=false
persist.audio.uhqa=1
persist.audio.voice.clarity=ON
persist.audio.vr.enable=true
persist.autorun.mode=1
persist.bootanim.preload=1
persist.bt.a2dp.aac_disable=false
persist.bt.a2dp_offload_cap=sbc-aptx-aptxhd-aac
persist.bt.enableAptXHD=true
persist.camera.HAL3.enabled=1
persist.camera.gyro.android=4
persist.camera.tnr.preview=1
persist.camera.tnr.video=1
persist.camera.tof.direct=1
persist.cne.feature=1
persist.data.df.agg.dl_pkt=10
persist.data.df.agg.dl_size=4096
persist.data.df.dev_name=rmnet_usb0
persist.data.df.dl_mode=5
persist.data.df.iwlan_mux=9
persist.data.df.mux_count=8
persist.data.df.ul_mode=5
persist.data.iwlan.enable=true
persist.data.mode=concurrent
persist.data.netmgrd.qos.enable=true
persist.data.wda.enable=true
persist.debug.coresight.config=none
persist.debug.wfd.enable=1
persist.delta_time.enable=true
persist.denoise.process.plates=0
persist.dpm.feature=1
persist.fuse_sdcard=true
persist.gps.qc_nlp_in_use=1
persist.hal.binderization=true
persist.hvdcp.allow_opti=1
persist.hwc.enable_vds=1
persist.igps.sensor=on
persist.ims.disableADBLogs=1
persist.ims.disableDebugLogs=1
persist.ims.disableIMSLogs=1
persist.ims.disableQXDMLogs=1
persist.ims.disableUserAgent=1
persist.mm.enable.prefetch=true
persist.net.doxlat=true
persist.power.useautobrightadj=true
persist.radio.RATE_ADAPT_ENABLE=1
persist.radio.ROTATION_ENABLE=1
persist.radio.VT_CAM_INTERFACE=2
persist.radio.VT_ENABLE=1
persist.radio.VT_HYBRID_ENABLE=1
persist.radio.add_power_save=1
persist.radio.apm_mdm_not_pwdn=1
persist.radio.videopause.mode=1
persist.radio.volte.dan_support=true
persist.rcs.supported=1
persist.rmnet.data.enable=true
persist.sensors.pocket_delay=1000
persist.service.adb.enable=0
persist.service.bdroid.ssrlvl=3
persist.service.clearaudio.enable=1
persist.service.clearphase.enable=1
persist.service.debuggable=0
persist.service.dseehx.enable=0
persist.service.enhance.enable=1
persist.service.sforce.enable=1
persist.service.swiqi3.enable=1
persist.service.xfrm.enable=1
persist.service.xloud.enable=1
persist.service.xrfm.mode=1
persist.speaker.prot.enable=false
persist.sys.app_rotation=1
persist.sys.colorgamut.mode=1
persist.sys.composition.type=gpu
persist.sys.dalvik.multithread=true
persist.sys.force_highendgfx=true
persist.sys.hiddenmenu.type=4
persist.sys.highlux.menu_on=1
persist.sys.isUsbOtgEnabled=1
persist.sys.media.avsync=true
persist.sys.purgeable_assets=1
persist.sys.root_access=1
persist.sys.scrollingcache=1
persist.sys.sdcardfs=force_on
persist.sys.ssr.enable_ramdumps=1
persist.sys.storage_preload=1
persist.sys.strictmode.disable=1
persist.sys.strictmode.visual=0
persist.sys.ui.hw=1
persist.sys.usb.config=charging
persist.sys.usb.factory=0
persist.sys.use_32bpp_alpha=1
persist.sys.use_dithering=1
persist.sys.video.enhancer=1
persist.sys.wfd.virtual=0
persist.telephony.support.ipv4=1
persist.telephony.support.ipv6=1
persist.timed.enable=true
persist.ts.rtmakeup=false
persist.tuning.qdcm=1
persist.vendor.audio.ras.enabled=true
persist.vendor.audio.speaker.prot.enable=false
persist.vendor.radio.add_power_save=1
persist.vendor.radio.wait_for_pbm=1
persist.volte_enalbed_by_hw=1
persist.zygote.preload_threads=4
pm.dexopt.ab-ota=quicken
pm.dexopt.bg-dexopt=quicken
pm.dexopt.boot=verify-profile
pm.dexopt.core-app=quicken
pm.dexopt.first-boot=verify-at-runtime
pm.dexopt.forced-dexopt=quicken
pm.dexopt.install=interpret-only
pm.dexopt.nsys-library=quicken
pm.dexopt.shared-apk=quicken
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
qcom.hw.aac.encoder=true
qcom.thermal=thermal-engine
qdcm.diagonal_matrix_mode=1
qdcm.only_pcc_for_trans=1
ro.adb.secure=0
ro.afwdata.LGfeatureset=NAOBASE
ro.apn.uservalue.protocol=IPV4V6
ro.astcenc.astcsupport=1
ro.audio.hifi=true
ro.bionic.ld.warning=1
ro.bluetooth.a4wp=true
ro.bluetooth.alwaysbleon=true
ro.bluetooth.emb_wp_mode=true
ro.bluetooth.remote.autoconnect=true
ro.bluetooth.wipower=true
ro.boot.vendor.overlay.theme=Pixel
ro.build.PTP_Feature=true
ro.build.chinasense=7.4.9
ro.build.display.id=SNAPPATCH 18.2
ro.build.display_manufacture_sn=1
ro.build.id=SNAPPATCH 18.2
ro.build.overseas=1
ro.build.selinux=0
ro.build.sense.version=8.0
ro.build.shutdown_timeout=0
Choose an username... said:
Would you elaborate on these?
Click to expand...
Click to collapse
Sure, the Thread is just not finalized yet cause a lack of Time. Was the same before with the Light Patch. The Documentation around My work is something i can't gleam with...
joaste said:
This patch did not solve the echo issue on calls for me, on AEX Oreo, but I would appreciate receiving feedback from others who have installed this, to confirm.
Thanks!
Click to expand...
Click to collapse
The Echo Issues will be fixed on the next Public Version. I tried a known fix and it worked, but it destroys the noise reduction (On Calls and Loudspeaker Calls(More Background Sound)). Hope i can optimize that a bit to get both, the fix AND the noise reduction. I'll keep You informed on G+
BR
Great mod!!! Beautiful, Powerfull and easy. I miss:
1. The face unlock enabled in your gaaps. Rom has the option for fast face unlock in Settings/Extensions/Lockscreen/Lockscreen UI/Face auto unlock
Here is ho to trick it:
- edit the gapps inteller.sh file and include the bold line line:
# Is device FaceUnlock compatible
if ( ! grep -qE "Victory|herring|sun4i" /proc/cpuinfo ); then
for xml in $SYSTEM/etc/permissions/android.hardware.camera.front.xml $SYSTEM/etc/permissions/android.hardware.camera.xml; do
if ( awk -vRS='-->' '{ gsub(/<!--.*/,"")}1' $xml | grep -q "feature name="android.hardware.camera.front" ); then
faceunlock_compat=true
break
fi
faceunlock_compat=false
done
else
faceunlock_compat=false
fi
faceunlock_compat=true
2. The option in aroma of changing the buttons to Tasks-Home-Back mapping. to do this you have to edit the file system/usr/keylayout/synaptics_dsx.kl. Yo use the Tasks-Home-Back mapping it should be:
key 158 APP_SWITCH
key 102 HOME
key 187 BACK
key 143 WAKEUP
Thanks!!
p82maarj said:
Great mod!!! Beautiful, Powerfull and easy. I miss:
1. The face unlock enabled in your gaaps. Rom has the option for fast face unlock in Settings/Extensions/Lockscreen/Lockscreen UI/Face auto unlock
Here is ho to trick it:
- edit the gapps inteller.sh file and include the bold line line:
# Is device FaceUnlock compatible
if ( ! grep -qE "Victory|herring|sun4i" /proc/cpuinfo ); then
for xml in $SYSTEM/etc/permissions/android.hardware.camera.front.xml $SYSTEM/etc/permissions/android.hardware.camera.xml; do
if ( awk -vRS='-->' '{ gsub(/<!--.*/,"")}1' $xml | grep -q "feature name="android.hardware.camera.front" ); then
faceunlock_compat=true
break
fi
faceunlock_compat=false
done
else
faceunlock_compat=false
fi
faceunlock_compat=true
2. The option in aroma of changing the buttons to Tasks-Home-Back mapping. to do this you have to edit the file system/usr/keylayout/synaptics_dsx.kl. Yo use the Tasks-Home-Back mapping it should be:
key 158 APP_SWITCH
key 102 HOME
key 187 BACK
key 143 WAKEUP
Thanks!!
Click to expand...
Click to collapse
Next Version will contain Faceunlock, thanks for sharing that. I wasn't aware of this Part and wondered why it's missing in the Android Settings. Do You know more about the installer.sh? I would like to force it also to flash the Pixel Camera Config instead of the Legacy One. Maybe is there also more to get out of the Super Pack!? Any help is much appreciated!
But the keylayout is really Device Specific, besides the Kernel should the Patch stay Unified and clean as far as possible. The Axon 7 has this Buttons, but i think it was one of the last Devices with them. Even the Axon 9 is expected to get a 18:9 Screen (Missing Front Speakers and Buttons).
I would prefer creating a external flashable zip containing system/usr/keylayout/synaptics_dsx.kl with changed Layout if there is non yet. Since 99% of the Devices don't have them. To create Options for that inside the Patch would mean useless Options for all other Devices or the need to remove them again before releasing the Patch for other Devices. Hope You understand that...
And sorry if something doesn't makes sense here, it was a long night with much coffee :silly:
Please, will it be possible to add an option to enable Jojoc battery tweaks in aroma ? ( https://forum.xda-developers.com/axon-7/how-to/tweak-jojoc-tuning-battery-focused-t3704831 ).
Otherwise, everything is working smoothly on latest AEX. :good: