Related
Help! My Motorola RAZR I XT890 cannot be "unbricked" and I tried several methods...
Hello!
I unlocked the bootloader successfully, then I tried to root my phone using The Razr guy method and I used the "RAZRi_Root_Windows" file, while rooting my phone went to the "warning bootloader unlocked" screen and it just loops forever from that screen, the bat file, showed that it successfully rooted my phone. I tried to fix it using rsd lite, but it never detects my phone, so I searched for a way to make my pc able to detect it, so I found I could use Intel xFSTK, installed it but still nothing it doesn't appear as shown in the tutorial, I even downloaded the dll file that it needed to run, but after running the xFSTK DLDR or something like that, the application is completely empty, and I saw it should show some tools to download something. Also tried using Linux Zorin, but it only says that my XT890 cannot be accessed and shows an usb error code.
I am able to enter the fastboot screen, the one you get by pressing POWER and VOLUME DOWN, also it charges my batter completely normal. Also my pc is able to show that the XT890 is connected, but only before installing the drivers and it shows the CD installer for the Motorola Device Manager and some other files (all this while looping), and if I enter the fastboot flash mode, it appears as "fastboot smi S", with a yellow triangle and an exclamation sign while in Windows device manager. It has Jelly Bean update from telcel (mexico), and I already have the xml.zip file to reinstall it.
I use windows 8.1 , and as mentioned Linux Zorin on my PC.
Could some help me with it...if you now how to fix it please list every single step on how to do it T_T, THANKS IN ADVANCE!!!!
It looks like the root method changed something bad in your system partition and that's why it won't boot up. First thing to do is installing the correct Motorola drivers. When in fastboot the device should be normally listed and could be acceded by fastboot. If fastboot is working well, use rsd lite to recover it or flash the system partition manually.
If everything is working well, consider installing a custom recovery and flashing a SuperSU zip for root access.
Hazou said:
It looks like the root method changed something bad in your system partition and that's why it won't boot up. First thing to do is installing the correct Motorola drivers. When in fastboot the device should be normally listed and could be acceded by fastboot. If fastboot is working well, use rsd lite to recover it or flash the system partition manually.
If everything is working well, consider installing a custom recovery and flashing a SuperSU zip for root access.
Click to expand...
Click to collapse
Thanks for answering!!
I've checked on some websites that if the phone is not detected by RSD Lite it maybe due to a bug in the phone's driver that happens only on windows 8/8.1, so I will try to do the same thing on windows 7 and see what happens...
Hope it works...T_T
weird_user said:
Thanks for answering!!
I've checked on some websites that if the phone is not detected by RSD Lite it maybe due to a bug in the phone's driver that happens only on windows 8/8.1, so I will try to do the same thing on windows 7 and see what happens...
Hope it works...T_T
Click to expand...
Click to collapse
That could be it.
I just noticed u have unlocked your bootloader. That means u have used fastboot earlier to get the unlock code into the device. So the drivers should work perfectly if u are in the good device modes. Try to flash the system_signed image manually though fastboot and see what happens ("fastboot flash system <path-to-system_signed-image>", u may need mFastboot for that(is inside the rsd-lite package))
Just for the record if u didn't know:
Adb: works only in selected recovery's and normal boot(sometimes in charging mode as well)
Fastboot: works only in AP fastboot mode (power+vol-down, black screen with white/blue text (rsd-lite needs this mode))
XFSTK: works only in medfield flash modues, something u don't need to be with that kind of error
Thanks again!!!
Hazou said:
That could be it.
I just noticed u have unlocked your bootloader. That means u have used fastboot earlier to get the unlock code into the device. So the drivers should work perfectly if u are in the good device modes. Try to flash the system_signed image manually though fastboot and see what happens ("fastboot flash system <path-to-system_signed-image>", u may need mFastboot for that(is inside the rsd-lite package))
Just for the record if u didn't know:
Adb: works only in selected recovery's and normal boot(sometimes in charging mode as well)
Fastboot: works only in AP fastboot mode (power+vol-down, black screen with white/blue text (rsd-lite needs this mode))
XFSTK: works only in medfield flash modues, something u don't need to be with that kind of error
Click to expand...
Click to collapse
Hazou said:
That could be it.
I just noticed u have unlocked your bootloader. That means u have used fastboot earlier to get the unlock code into the device. So the drivers should work perfectly if u are in the good device modes. Try to flash the system_signed image manually though fastboot and see what happens ("fastboot flash system <path-to-system_signed-image>", u may need mFastboot for that(is inside the rsd-lite package))
Just for the record if u didn't know:
Adb: works only in selected recovery's and normal boot(sometimes in charging mode as well)
Fastboot: works only in AP fastboot mode (power+vol-down, black screen with white/blue text (rsd-lite needs this mode))
XFSTK: works only in medfield flash modues, something u don't need to be with that kind of error
Click to expand...
Click to collapse
I am able to enter RECOVERY MODE NOW (I installed CWM, before this I was only able to see the android lying on the floor ans saty dead right there, I was supposed to press Volume + and - and the camera button at the same time, but nothing happened), it seems to be easier to unbrick it this way, but now the problem is that after I follow the steps to reinstall the original ROM, it aborts installation. I read this may be caused due to a file on the zip file, I looked for it, but nor the Folder META-INF, whic is supposed to contain a "update-script" file, nor that file is anywhere in the ROM folder...
I've even tried cyanogenmod (after first trying Telcel original ROM and then the retail GB ROM) cuz it actually contains the folder previously mentioned and the file is in a different path, but it is there, I modified it, but got a "Can't open tmd/update.zip (bad) Installation aborted" error...I don't know what else to do T_T...
Note: I also used sideload and CWM to install it, but the same thing happens. Also checked some other post about this issue, but none has helped me...
What zip file are u installing?
If u want to go back to stock, just use a RSD lite package for 4.1.2 or install TWRP and restore a TWRP backup to go to 4.4.2. There is no official RSD lite package for 4.4.2 and the update.zip doesn't work if your system doesn't boot already.
Hazou said:
What zip file are u installing?
If u want to go back to stock, just use a RSD lite package for 4.1.2 or install TWRP and restore a TWRP backup to go to 4.4.2. There is no official RSD lite package for 4.4.2 and the update.zip doesn't work if your system doesn't boot already.
Click to expand...
Click to collapse
It's done! Thanks!
I actually used another computer with windows 10, also I used RSD Lite and it worked just fine, now I have the stock ROM from Telcel and it it is working almost normal. The only abnormality I've seen is that my phone turns itself off when battery is at 20%, I searched info about that problem and it says I may re calibrate the battery, so it may work fine again, but now I need to root again to be able to do that T_T, hope it works this time...
THANKS! again!
iam using RM3 recently i shifted from global rom to chinese because it is andriod 11.and rm v3 so i used it for few days but i need google services so i thought about rooting .I installed all required files .the problem begins here when i connected it to my pc it didnt detect anything....i heard new cn version doesnt have mtp or usb connection so i used unbrick tool(eu) for stock rom ..now it got stuck in currpted.i need some help ...i tried different ways...under adb devices the device is not showing so i cant do manually.one more thing when i use unbrick tool(eu) it show firehose file downloaded ....but in unbrick tool(non-eu) it says cannot download firehose file.
.
.
Help me someone!
You give problem because your'Mg3 not yet uninstall root complete, so Android system prevent it booting.
=> Solution:
- Step 1: re-unbrick your phone with unbrick tool (eu).
- Step 2: reboot to bootloader.
- Step 3: fastboot oem nubia_unlock NUBIA_NX629J
- Step 4: use volumn up or down to choose line with content "unlock bootloader". Then wait for your phone working. => Done
≠==========================≠
|Source: sSjBlue197 (vietnamese).|
|Contact: fb.com/ssjblue197. |
≠==========================≠
Nanilucky11 said:
iam using RM3 recently i shifted from global rom to chinese because it is andriod 11.and rm v3 so i used it for few days but i need google services so i thought about rooting .I installed all required files .the problem begins here when i connected it to my pc it didnt detect anything....i heard new cn version doesnt have mtp or usb connection so i used unbrick tool(eu) for stock rom ..now it got stuck in currpted.i need some help ...i tried different ways...under adb devices the device is not showing so i cant do manually.one more thing when i use unbrick tool(eu) it show firehose file downloaded ....but in unbrick tool(non-eu) it says cannot download firehose file.
.
.
Help me someone!
Click to expand...
Click to collapse
Enter bootloader POWER BUTTON+VOLUME DOWN
Use PC enter adb command :
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flashing unlock
Then, reboot device
enter command
"fastboot reboot"
Hi
I want to flash my Mi 9 Lite by MiFlash v2020.3.14.0 in fastboot mode(Fastboot Update).
My device is unlocked and unroot, I download the latest official tgz ROM and decompress it and run MiFlash and past the ROM address to the MiFlash tool, after refreshing my device is recognized , I click on flash button, but MiFlash tools show me "error:not catch checkpoint (\$fastboot -s.*lock).flash is not done"
Even by going to the configuration menu and removing the text "\$fastboot -s .* lock" from the checkpoint and OK it and then clicking on the flash, the program will quickly show the flash done and show flashing is success, but it is not actually flashed!!!
I have already installed Minimal ADB Fastboot v1.4.3 and device driver, developer options and usb debugging is on.
in CMD I run fastboot devices command and my device is recognized
I even installed TWRP recovery by adb commands
what's the solution?
Why MiFlash does not flash the official ROM and shows error?
How can I flash the official ROM(*.tgz file) in Fastboot?
thanks.
karaj3 said:
Hi
I want to flash my Mi 9 Lite by MiFlash v2020.3.14.0 in fastboot mode(Fastboot Update).
My device is unlocked and unroot, I download the latest official tgz ROM and decompress it and run MiFlash and past the ROM address to the MiFlash tool, after refreshing my device is recognized , I click on flash button, but MiFlash tools show me "error:not catch checkpoint (\$fastboot -s.*lock).flash is not done"
Even by going to the configuration menu and removing the text "\$fastboot -s .* lock" from the checkpoint and OK it and then clicking on the flash, the program will quickly show the flash done and show flashing is success, but it is not actually flashed!!!
I have already installed Minimal ADB Fastboot v1.4.3 and device driver, developer options and usb debugging is on.
in CMD I run fastboot devices command and my device is recognized
I even installed TWRP recovery by adb commands
what's the solution?
Why MiFlash does not flash the official ROM and shows error?
How can I flash the official ROM(*.tgz file) in Fastboot?
thanks.
Click to expand...
Click to collapse
Probably you did something wrong trying to remove that text, you don't need to remove it if your bootloader is unlocked.
You can flash it directly using fastboot commands, or you can flash it through EDL mode too.
SubwayChamp said:
Probably you did something wrong trying to remove that text, you don't need to remove it if your bootloader is unlocked.
You can flash it directly using fastboot commands, or you can flash it through EDL mode too.
Click to expand...
Click to collapse
Thank you for your answer
My device bootloader is unlocked, I also saw and checked it. I did it both when it was text and when I deleted the text, but in fact nothing happened and my device did not flash and only remained in the same fastboot mode until I restarted it and it started normally.
I even tried the new version of Mi Flash Tool v20210226 and got the same result as before.
I downloaded 3 different versions for mi 9 lite from the official site, https://c.mi.com/oc/miuidownload/detail?guide=2, and as I explained, it was.
even I downloaded other regional Roms but the same result...
you said : You can flash it directly using fastboot commands, or you can flash it through EDL mode too.
How can I flash an official ROM with the *.tgz extension(in fastboot mode or other mode)?
karaj3 said:
Thank you for your answer
My device bootloader is unlocked, I also saw and checked it. I did it both when it was text and when I deleted the text, but in fact nothing happened and my device did not flash and only remained in the same fastboot mode until I restarted it and it started normally.
I even tried the new version of Mi Flash Tool v20210226 and got the same result as before.
I downloaded 3 different versions for mi 9 lite from the official site, https://c.mi.com/oc/miuidownload/detail?guide=2, and as I explained, it was.
even I downloaded other regional Roms but the same result...
you said : You can flash it directly using fastboot commands, or you can flash it through EDL mode too.
How can I flash an official ROM with the *.tgz extension(in fastboot mode or other mode)?
Click to expand...
Click to collapse
Mm, Maybe you are trying to use the fastboot ROM through Mi Flash tool without firstly decompressing it?
You need to decompress first the tar.gz file, you will find inside all the image partitions, the scripts needed.
As you can see in the images in this thread, the files have to be accessible for the tool to can load them https://androidmtk.com/use-xiaomi-mi-flash-tool
This is the simplest way, using Mi Flash tool, you can use it in fastboot (if unlocked) or in EDL mode (no matter locked or not). Take care to not choose the option "relock" device if you don't want to do that.
For the fastboot commands you require to decompress the files and execute simply fastboot flashall -w this will format data and update your device. Sometimes this simple command doesn't work, then you can edit the flashall.bat file, line-by-line, to the scripts being executed.
SubwayChamp said:
Mm, Maybe you are trying to use the fastboot ROM through Mi Flash tool without firstly decompressing it?
You need to decompress first the tar.gz file, you will find inside all the image partitions, the scripts needed.
As you can see in the images in this thread, the files have to be accessible for the tool to can load them https://androidmtk.com/use-xiaomi-mi-flash-tool
This is the simplest way, using Mi Flash tool, you can use it in fastboot (if unlocked) or in EDL mode (no matter locked or not). Take care to not choose the option "relock" device if you don't want to do that.
For the fastboot commands you require to decompress the files and execute simply fastboot flashall -w this will format data and update your device. Sometimes this simple command doesn't work, then you can edit the flashall.bat file, line-by-line, to the scripts being executed.
Click to expand...
Click to collapse
No.
I decompress first the tar.gz file! I wrote all my actions in post 1 and post 3.
I followed the instructions written on the official Xiaomi page(https://c.mi.com/oc/miuidownload/detail?guide=2)
how can I flash the official ROM in fastboot mode or any other mode?
Please write a guide for me. my device is Mi 9 Lite.
thank you.
karaj3 said:
No.
I decompress first the tar.gz file! I wrote all my actions in post 1 and post 3.
I followed the instructions written on the official Xiaomi page(https://c.mi.com/oc/miuidownload/detail?guide=2)
how can I flash the official ROM in fastboot mode or any other mode?
Please write a guide for me. my device is Mi 9 Lite.
thank you.
Click to expand...
Click to collapse
You can flash through EDL mode the same way as it is in the guide you followed, the main difference is that you have to put your device in EDL mode to perform the operation.
As your device is unlocked you can put it in EDL mode without the need to disassemble the back cover, either using fastboot oem edl or from a device off, pressing both volume buttons at the same time that you connect to the PC, firstly open Windows device manager and check that it is listed as Qualcomm 9008-USB, you need to install this https://www.getdroidtips.com/download-qualcomm-qdloader-hs-usb-driver/
Rom should be unzipped on desktop. Not inside a faulder.... If you unzipped it inside faulder error will come up
Noexcusses said:
Rom should be unzipped on desktop. Not inside a faulder.... If you unzipped it inside faulder error will come up
Click to expand...
Click to collapse
Thank you for your answer, but it still showed the same error
karaj3 said:
Thank you for your answer, but it still showed the same error
Click to expand...
Click to collapse
The folder can be placed in any side, even I always have my tool installed in the main drive (C) and the Miui ROM in another partition (D) you have to suppress all the spaces in the names and lastly browse where the images' directory is, not inside but where it is the images directory and the scripts.
What about EDL, did you achieve to get it? Upload some screenshot, from the browser files and from the error you are getting, I'm sure it's easy to fix it, maybe you are missing something.
SubwayChamp said:
The folder can be placed in any side, even I always have my tool installed in the main drive (C) and the Miui ROM in another partition (D) you have to suppress all the spaces in the names and lastly browse where the images' directory is, not inside but where it is the images directory and the scripts.
What about EDL, did you achieve to get it? Upload some screenshot, from the browser files and from the error you are getting, I'm sure it's easy to fix it, maybe you are missing something.
Click to expand...
Click to collapse
I tried everything and the same error was shown!
I did not try the EDL method because I am not a professional user and I want to use safe, common and easy methods.
karaj3 said:
I tried everything and the same error was shown!
I did not try the EDL method because I am not a professional user and I want to use safe, common and easy methods.
Click to expand...
Click to collapse
Don't use "Clean all & Lock" at least till you solve it.
EDL method is simple to use if you have your bootloader unlocked (this is one of the reasons why you don't have to lock it right now).
To use the EDL method you just have to power off completely, then while you connect the device to the PC press both volume buttons.
Before install the Qualcomm 9008 USB drivers.
Hello, I downloaded the redmi 9c stock rom 12.0.10 and there was a flashing error
It was something like Preloader flash error
Now it doesn't turn on anymore, when I hold down the power button and connect it to the computer it recognizes it but disconnects after a few seconds (like 15 seconds or more)
I would appreciate any help, since the cell phone is not mine, it belongs to my brother xd
-download this official rom https://xiaomifirmwareupdater.com/miui/angelica/stable/V12.0.21.0.QCRMIXM/
and adb platform tools https://developer.android.com/studio/releases/platform-tools
-extract the content of the rom into the platform tools folder then open cmd.
-boot into fastboot using power and vol down button, then in cmd enter "fastboot devices" you must see your device connected.
-execute flash_all.bat in cmd to flash everything
-done
Akashi117 said:
-download this official rom https://xiaomifirmwareupdater.com/miui/angelica/stable/V12.0.21.0.QCRMIXM/
and adb platform tools https://developer.android.com/studio/releases/platform-tools
-extract the content of the rom into the platform tools folder then open cmd.
-boot into fastboot using power and vol down button, then in cmd enter "fastboot devices" you must see your device connected.
-execute flash_all.bat in cmd to flash everything
Click to expand...
Click to collapse
but I tell you that the cell phone does not turn on, when it is connected it only sounds as if it was connected but it does not appear anywhere, included in fastboot or adb.
XtremeTHN22 said:
but I tell you that the cell phone does not turn on, when it is connected it only sounds as if it was connected but it does not appear anywhere, included in fastboot or adb
Click to expand...
Click to collapse
So you're telling me you can't boot Into fastboot and recovery ? Go download xiaomitools v2 and select (The phone is bricked) then you Can have options to repaire it.
Akashi117 said:
So you're telling me you can't boot Into fastboot and recovery ? Go download xiaomitools v2 and select (The phone is bricked) then you Can have options to repaire it.
Click to expand...
Click to collapse
ok i will try, thx
Akashi117 said:
So you're telling me you can't boot Into fastboot and recovery ? Go download xiaomitools v2 and select (The phone is bricked) then you Can have options to repaire it.
Click to expand...
Click to collapse
didn't work ;( , i think i have a hardbrick, do u know how repair it?
I fixed it with this video
HARD BRICK|Unbrick Redmi Note 9 or Redmi 10X 4G (merlin) using SPFlash Tool
It is in spanish but for me work
Just have to change the rom, because the one in the tutorial is from another phone
I guess u booting to edl mode when only sounds plung on device on pc
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Andris85 said:
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Click to expand...
Click to collapse
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
gurtnyi said:
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Click to expand...
Click to collapse
Just the boot.ini. but I think this would make fastboot mode work. But it's not working
tutibreaker said:
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
Click to expand...
Click to collapse
What should I use to reflash? Mi flash? This is the NS
Yes... I probably mixed up the boot file in the downloads folder and not the correct received flash
Click to expand...
Click to collapse
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
gurtnyi said:
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
Click to expand...
Click to collapse
yepp, enable oem unlock. But fastbootmode is required for all operations. But fastboot mode doesn't work.
What do you mean it doesn't work?
Can't enter into fastboot mode?
gurtnyi said:
What do you mean it doesn't work?
Can't enter into fastboot mode?
Click to expand...
Click to collapse
Can't enter fastboot mode. The device only shows "Redmi" lettering. If fatboot worked, I could have done it already. power+volume down, the device just restarts and shows "redmi".
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
gurtnyi said:
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
Click to expand...
Click to collapse
it just restarts, as long as I press and hold volume down+power, if I don't press it, it just shows the redmi text
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
gurtnyi said:
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
Click to expand...
Click to collapse
TXH
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Pegelaar_NL said:
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Click to expand...
Click to collapse
Yep, this guy here 's got the point. If you can't flash with sp flash tool because auth fail, there's a method to bypass it.
You can find the tutorial here: https://www.getdroidtips.com/bypass-mediateks-sp-flash-tool-authentication-protection/
I also got some help from this guy's post, many thanks to him too.
https://forum.xda-developers.com/t/...ad_da_fail-0x7d4-2004-for-mtk-phones.3692259/
Let us know how it's going with it! ;D
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buytoday there is a lot of devices for gaming like rog phone and red magic
Click to expand...
Click to collapse
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Click to expand...
Click to collapse
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
tutibreaker said:
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Click to expand...
Click to collapse
If you can root it easily, then the expensive one is good for me! Normal root was not available for typical gamer phones for years. If I buy something for which root may not be available, then I'm wasting my money...
gurtnyi said:
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
Click to expand...
Click to collapse
I will look today