[UPDATED 30/3/22][ROM][VANILLA][Android 12.1] CipherOS 3.0 Gravity for Xiaomi Redmi 6/6A - Xiaomi Redmi 6A ROMs, Kernels, Recoveries, & Other

[UPDATED 30/3/22][ROM][VANILLA][Android 12.1] CipherOS 3.0 Gravity for Xiaomi Redmi 6/6A - Xiaomi Redmi 6A ROMs, Kernels, Recoveries, & Other

Hi, can I install this ROM on Redmi 6?
Is the vendor for Redmi 6 or only 6A?
Edit: Can I have arm64 on Redmi 6 too?
Edit 2: Has anyone tested in for both devices?

TechyMinati said:
CipherOS is a Android Custom OS, Based On AOSP, Striving to Provide its Users , A Clean , Bloat free & Sturdy Experience with Minimal Customisation !
Code:
/* Your warranty is now void or maybe not?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
With the release of CipherOS 2.5 Lynx , We Ensure that Every OFFICIAL Device remains Up-to-date with latest Patches , Asap its been released by Google !
Download it from
CipherOS 2.5 ROM
Arm64 Vendor
The people working towards bringing you this release are:
Aryan Sinha
Jaishanav Prasad
Jamie Ho
Matsvei Niaverau
Alibei
Bounty
1. Download the ROM, & Alps Arm64 Vendor
2. Wipe System, Data, Dalvik, Cache.
3. Flash the Arm64 Vendor, ROM, GApps (Optional), Magisk (Optional).
4. Reboot and Enjoy.
GAPPS ARE NOT INCLUDED
We would like to thank the following ROMs, because if they weren't here, we couldn't be there too <3
LineageOS
POSP
Device Side Credits:-
[*] Dinolek, Wulan17, Jmpfbmx, and all Redmi 6/6A Dev Team
Source Code:
ROM Source
Device Source
Kernel Source
Donate:
PayPal
Click to expand...
Click to collapse
Hi, I flashed Arm64 Vendor and CipherOS 2.5 Lynx for Xiaomi Redmi 6A without any problems, but it remains stuck on boot, no boot, how can I fix it?

ogartep said:
Hi, I flashed Arm64 Vendor and CipherOS 2.5 Lynx for Xiaomi Redmi 6A without any problems, but it remains stuck on boot, no boot, how can I fix it?
Click to expand...
Click to collapse
1. is your device Redmi 6A?
2.) were you on Pie firmware (MIUI 11 and higher)
3.) did you clean flash?

TechyMinati said:
1. il tuo dispositivo è Redmi 6A?
2.) eri sul firmware Pie (MIUI 11 e versioni successive)
3.) hai pulito il flash?
Click to expand...
Click to collapse
Yes is Redmi 6A I was on others custom rom Floko the last. Yes i formatted the date and advanced cleaning.

ogartep said:
Yes is Redmi 6A I was on others custom rom Floko the last. Yes i formatted the date and advanced cleaning.
Click to expand...
Click to collapse

Sucharek 233 said:
Hi, can I install this ROM on Redmi 6?
Is the vendor for Redmi 6 or only 6A?
Edit: Can I have arm64 on Redmi 6 too?
Edit 2: Has anyone tested in for both devices?
Click to expand...
Click to collapse
Hi, sorry for reposting this, but I really want to know if I can install this on Redmi 6 and if anyone has tested it on it.
If yes, do I flash the arm64 vendor, or do I just flash the ROM?

TechyMinati said:
CipherOS is a Android Custom OS, Based On AOSP, Striving to Provide its Users , A Clean , Bloat free & Sturdy Experience with Minimal Customisation !
Code:
/* Your warranty is now void or maybe not?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
With the release of CipherOS 2.5 Lynx , We Ensure that Every OFFICIAL Device remains Up-to-date with latest Patches , Asap its been released by Google !
Download it from
CipherOS 2.5 ROM
Arm64 Vendor
The people working towards bringing you this release are:
Aryan Sinha
Jaishanav Prasad
Jamie Ho
Matsvei Niaverau
Alibei
Bounty
1. Download the ROM, & Alps Arm64 Vendor
2. Wipe System, Data, Dalvik, Cache.
3. Flash the Arm64 Vendor, ROM, GApps (Optional), Magisk (Optional).
4. Reboot and Enjoy.
GAPPS ARE NOT INCLUDED
We would like to thank the following ROMs, because if they weren't here, we couldn't be there too <3
LineageOS
POSP
Device Side Credits:-
[*] Dinolek, Wulan17, Jmpfbmx, and all Redmi 6/6A Dev Team
Source Code:
ROM Source
Device Source
Kernel Source
Donate:
PayPal
Click to expand...
Click to collapse
Thank you so much for that rom and 64 bit Working perfectly <3 Redmi 6a

Sucharek 233 said:
Hi, sorry for reposting this, but I really want to know if I can install this on Redmi 6 and if anyone has tested it on it.
If yes, do I flash the arm64 vendor, or do I just flash the ROM?
Click to expand...
Click to collapse
you'll need redmi 6 arm64 vendor for it download it from here https://true-mirror-69.gitsauraj.workers.dev/0:/ALPS-Vendor-0.6-ARM64-cereus.zip

TechyMinati said:
you'll need redmi 6 arm64 vendor for it download it from here https://true-mirror-69.gitsauraj.workers.dev/0:/ALPS-Vendor-0.6-ARM64-cereus.zip
Click to expand...
Click to collapse
Oh, ok, thanks.
I have 1 more question. Has anyone tried your ROM (and the vendor) on redmi 6?

Sucharek 233 said:
Oh, ok, thanks.
I have 1 more question. Has anyone tried your ROM (and the vendor) on redmi 6?
Click to expand...
Click to collapse
yes

Ok, so I flashed the ROM and it's working good, but there are some bugs.
I'm on Redmi 6 btw.
1. The fingerprint doesn't work
2. Performance issues
3. DT2W (double tap to wake) doesn't work (on Redmi 6)

I couldn't flash this ROM on 6A. I am getting something like Error 255
I was on Lineage 17.1 circa 2020_07... and flashing the 64bit vendor bootlooped the phone, so I have to get back to stock miui_HM6A_V10.4.4.0 - Agh!
I am restoring my Lineage 17.1 now, but what did I do wrong?
Does it work going from Lineage or custom Android 10 ROMs or one need to flash from stock MIUI?
P.S. Is this ROM ARM64 Android 11?

_MOCKBA_ said:
I couldn't flash this ROM on 6A. I am getting something like Error 255
I was on Lineage 17.1 circa 2020_07... and flashing the 64bit vendor bootlooped the phone, so I have to get back to stock miui_HM6A_V10.4.4.0 - Agh!
I am restoring my Lineage 17.1 now, but what did I do wrong?
Does it work going from Lineage or custom Android 10 ROMs or one need to flash from stock MIUI?
P.S. Is this ROM ARM64 Android 11?
Click to expand...
Click to collapse
Did you flash Alps vendor before the ROM?
It's like this = flash vendor, ROM, gapps, Magisk.
If you don't do it like that, your phone won't boot to system.
Edit: It's arm64 Android 12.

Well, I managed to install after going to MIUI 10.4.4 and upgrading to MIUI 11.0.5. My take that first time around I didn't wipe clean enough partitions before flashing...
Anyway, What GApps are you using? I couldn't flash OpenGApps, so I ended up using BitGApps
The biggest problem that I am experiencing is after reboot my phone goes into Airplane mode and after a while it stops seeing my SIM card alltogether.
Also I totally lost ability to make phone calls at some point (data works fine). I am on AT&T so it is 1800GSM/LTE/VolTE - I tried different dialers, but I figure it has to do more with phone stack not quite working... Any ideas?
Clearly, the ROM is not ready yet for daily use. How do I flash Lineage 17.1 when I had to flash 64-bit vendor?
***
Finally couple more notes:
When phone throttles past 900MHz energy saving mode (like when you do almost anything outside of music player), Bluetooth or music playback cannot keep up.
Antutu Lite v9.3.2 crashes, so I couldn't benchmark what is the improvement of going to 64-bit Android and Vulcan...
Antutu finally run and benchmarked as follows 22,838 CPU /5274 GPU /20,773 MEM/34,588 UX for a total of 83,473... For reference MIUI 11.0.5 benchmarked 22,339/8,990/22,387/29,876=83,583 ... So Vulcan implementation made GPU benchmark from poor to even worse and 64-bit vs. 32-bit doesn't make much difference.
This ROM still fails "Pokemon Go test" - phone was too weak for Pokemon with Lineage 17.1... on Android 12 it seems unable to get GPS signal

I have miui 11.0.9 android 9 pie how can I flash this rom using Xiaomi adb&fastboot tool that I have installed in my pc I need step by step guide

[email protected] said:
I have miui 11.0.9 android 9 pie how can I flash this rom using Xiaomi adb&fastboot tool that I have installed in my pc I need step by step guide
Click to expand...
Click to collapse
Hi, I'm going to guide you.
1. Unlock your bootloaded (you've probably done that)
2. Judging by your MIUI version, you have Redmi 6A and you have to downgrade - download a stock MIUI ROM here: https://xiaomifirmwareupdater.com/archive/miui/cactus/
The version you're looking for is this:
Redmi 6A GlobalStableFastbootV11.0.8.0.PCBMIXM9.01.8 GB2020-05-09
After you've downloaded it, extract the package. After you extract the first one, there's another one, which needs to be extracted too. The path to the file could be too long resulting in an error, so rename the long folders to like stockROM or something like that.
Now open (or download: https://www.xiaomiflash.com/downloads/MiFlash20181115.zip) MiFlash, find the ROM path, and click Ok. At the bottom right, you'll see 3 buttons. Select "Flash all" (wipes your data).
Now reboot your phone into fastboot mode - hold power and volume down buttons.
Plug your phone into your PC and click Refresh. When you see your device, click on Flash.
This process will take about 200 - 300 seconds.
3. Download the ROM, arm64 vendor, NikGapps (https://sourceforge.net/projects/ni...s-basic-arm64-12-20220222-signed.zip/download) and Magisk (https://github.com/topjohnwu/Magisk/releases/download/v24.3/Magisk-v24.3.apk) (rename the extension from .apk to .zip)
4. Download TWRP here: https://dl.twrp.me/cactus/twrp-3.6.1_9-0-cactus.img
5. After you've downloaded everything, boot your phone into fastboot again and plug it into your PC.
6. Open cmd and navigate to the folder you have fastboot and type "fastboot flash recovery twrp-3.6.1_9-0-cactus.img" after thats done, type "fastboot reboot". Now keep holding volume up untill the recovery boots up.
7. Copy the ROM, gapps and vendor to your phone via explorer
8. On TWRP go to Wipe -> Advanced wipe -> select Dalvik / ART Cache, System, Data, Cache -> Swipe to wipe
9. Now click on the home button (the middle one) and then Install.
10. Firstly, install the vendor -> ROM -> Gapps -> Magisk.
11. Reboot system and enjoy.
If anything fails, reply.

_MOCKBA_ said:
Well, I managed to install after going to MIUI 10.4.4 and upgrading to MIUI 11.0.5. My take that first time around I didn't wipe clean enough partitions before flashing...
Anyway, What GApps are you using? I couldn't flash OpenGApps, so I ended up using BitGApps
The biggest problem that I am experiencing is after reboot my phone goes into Airplane mode and after a while it stops seeing my SIM card alltogether.
Also I totally lost ability to make phone calls at some point (data works fine). I am on AT&T so it is 1800GSM/LTE/VolTE - I tried different dialers, but I figure it has to do more with phone stack not quite working... Any ideas?
Clearly, the ROM is not ready yet for daily use. How do I flash Lineage 17.1 when I had to flash 64-bit vendor?
***
Finally couple more notes:
When phone throttles past 900MHz energy saving mode (like when you do almost anything outside of music player), Bluetooth or music playback cannot keep up.
Antutu Lite v9.3.2 crashes, so I couldn't benchmark what is the improvement of going to 64-bit Android and Vulcan... This ROM still fails "Pokemon Go test" - phone was too weak for Pokemon with Lineage 17.1
Click to expand...
Click to collapse
Hi, Edit: install 11.0.8.0 if you're in Redmi 6A and 11.0.4.0 on Redmi 6.
I think I used NikGapps (https://sourceforge.net/projects/ni...s-basic-arm64-12-20220222-signed.zip/download).
I don't know if you can flash Lineage with the custom vendor. I recommend reinstalling MIUI (via MiFlash) and installing Lineage like you did. That also means your data are gonna get wiped.
I think that Android 12 is too much for Redmi 6/6A. Let's just stick with what our phones can handle. I think that Lineage 17.1 is the best and fastest ROM so far.

Sucharek 233 said:
Hi, Edit: install 11.0.8.0 if you're in Redmi 6A and 11.0.4.0 on Redmi 6.
I think I used NikGapps (https://sourceforge.net/projects/ni...s-basic-arm64-12-20220222-signed.zip/download).
I don't know if you can flash Lineage with the custom vendor. I recommend reinstalling MIUI (via MiFlash) and installing Lineage like you did. That also means your data are gonna get wiped.
I think that Android 12 is too much for Redmi 6/6A. Let's just stick with what our phones can handle. I think that Lineage 17.1 is the best and fastest ROM so far.
Click to expand...
Click to collapse
Hi, where can i find the link for LineageOS 17.1 for redmi 6? thank you!

mmilles said:
Hi, where can i find the link for LineageOS 17.1 for redmi 6? thank you!
Click to expand...
Click to collapse
Hi, here: https://forum.xda-developers.com/t/rom-unofficial-lineage-os-17-1.4252115/

Related

[ROM][9.0]LiquidRemix[v10.0][UNOFFICIAL][TREBLE][15/2]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to Liquid Remix! Liquid Remix is a new ROM of today, and I'm bringing it to everyone! I hope everyone in the ZTE Axon 7 community can enjoy this ROM to it's max!
Liquid Remix is a New age mix of all the best ROMs of today with added essence from the older days. Android 9.0 project based from the old lead dev of Liquid smooth, Liquid0624, along with VenkatVV, and community contributors! All features are open source and will stay that way as the community is the most important thing to our project!
Our Android Development Team is very end user oriented; we care about what you want and bringing it to you. We do as much as we can to keep our users happy while primarily focusing the aims on stability, speed, optimizations, other additions and features that complement the ROMs as well as some frequently requested user add-ons.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
[/CENTER]
Even though the ROM is tested beforehand, I cannot guarantee anything that may happen to your device. I am not responsible for anything that happens to your device.
ROM - DownloadOpen Gapps - Download
Clean flash is recommended:
Unlock the Bootloader first , and flash universial bootstack and modem before anything
1. Go to TWRP
2. Wipe System, Vendor, Data, Cache, and Dalvik Cache. Internal Storage wipe is not needed
3. Flash Kranoner's vendor or Nfound vendor (Recommended vendor) or flash another vendor of your choice. LineageOS vendor and anything based on LineageOS, like DotOS vendor will not work.
4. Extract the ROM .zip file to get system.img , flash it in system partition. , Boot and check the ROM
5. Reboot to recovery after flashing ROM and then Factory reset then flash Opengapps. Nano or below is recommended
6. Reboot to system
7. After first boot, you will need to flash NFC/Hotspot fix by @raystef66 and @kountry83 .
8. DONE! Enjoy!
ROM - LiquidRemix
Device Tree - Phh Device
Google (for AOSP)
Lineage OS (Rom Base)
@phhusson for his great work in treble development.
@yshalsager for his treble build guide.
@Unjustified Dev
@DrakenFX
@Kranoner & @NFound
special thanks for all testers in Axon7 TG group
XDAevDB Information
Unofficial LiquidRemix, GSI for ZTE Axon 7
ROM OS Version
ROM : 10.0.5
Security Patch : 5 FEB.
Status:Unofficial
Created 2018-12-11
Last Updated 2019-2-15
ComboFix that will flash NFC/Button Swap/overlay fix/magisk in one go
Aroma Combo Fix
Thanks to @raystef66

What doesn't work/bugs:
Navigation Gesture
Network Traffic will reboot system UI / crash settings but the chosen option will be applied
VOLTE , WFC
maybe other custom settings ?
What works:
- Pretty much everything else
changelog:
14-2-2019
12-1-2019
22-12-2018

FAQ
Why GSI not a normal ROM ?
- The sources are still not available/stable so the only way to get new Pie ROMs for our device is by using GSI.
TWRP says no OS after flashing system.img ?
-Thats normal , just reboot and it should boot
Phone shows the following message after every reboot "Internal problem detected..."
-That's a vendor issue, it does not do anything just press OK.
Screen freeze or unresponsive ?
-Flash the NFC/Hotspot fix.
Which vendor is recommended ?
- NFound v1.1 has less amount of issues.
Some customization options does not work ?
-Restart system UI and/or Reboot system.
Themes are broken (Dark/Black) ?
- wipe clean everything (including vendor) and use NFound vendor , follow the instructions.
Substratum does not work ?
- use this apk key and install it as normal apk
Option XYZ does not work ?
- Post your setup with detailed description and of course a LOG.
I want XYZ feature ?
- I'm only a builder not a dev, so no promises.
How stable is this ROM ?
- the ROM is very stable and can be used as daily driver.

Very interested in this ROM, will try it out

Thanks for your great efforts, buddy.
I am going to try it out.
Which universial bootstack do you recommend?
Can you kindly make a link to it?
Thanks in advance.

samichiban said:
Thanks for your great efforts, buddy.
I am going to try it out.
Which universial bootstack do you recommend?
Can you kindly make a link to it?
Thanks in advance.
Click to expand...
Click to collapse
use this one here https://androidfilehost.com/?fid=11410932744536985259
anyway if you are in official LOS15.1and its working fine you don't need to flash bootstack/modem , just follow the instructions and it should boot fine
NOTE : WIPE THE VENDOR & FLASH ANOTHER ONE OTHER WISE IT WONT BOOT.

Nice!
Glad that my guide helped

king1990 said:
use this one here https://androidfilehost.com/?fid=11410932744536985259
anyway if you are in official LOS15.1and its working fine you don't need to flash bootstack/modem , just follow the instructions and it should boot fine
NOTE : WIPE THE VENDOR & FLASH ANOTHER ONE OTHER WISE IT WONT BOOT.
Click to expand...
Click to collapse
Thanks for quick reply, king1990. Much appreciated.
My mobile is Axon7G model, and ATM Nfound's AospExtended ROM v5.8 (Rom 8.1) running.
Your ROM zip title indicates A-only but will it work fine with my Axon7G?

yshalsager said:
Nice!
Glad that my guide helped
Click to expand...
Click to collapse
Your guide was huge help , without it this ROM would never happen
samichiban said:
Thanks for quick reply, king1990. Much appreciated.
My mobile is Axon7G model, and atm Nfound's AospExtended ROM v5.8 (Rom 8.1) installed.
Your ROM zip title indicates A-only but will it work fine with my Axon7G?
Click to expand...
Click to collapse
Flash LOS15.1 and it should create vendor partition to allow you to install this ROM
it will work in both G & U models

You post a GSI in axon 7 forums,why if i may ask? This is a GSI for treble A phones,i think this should be in the treble forums only?

Predatorhaze said:
You post a GSI in axon 7 forums,why if i may ask? This is a GSI for treble A phones,i think this should be in the treble forums only
I was happy when i saw LiquidRemix,the happynes didnt last long when ive read GSI
Click to expand...
Click to collapse
Those of us who initially tested this GSI did not think it was ready for other devices outside of the Axon 7 community, as it will not boot on LOS based vendors. @king1990 built this for our community, and it was just way too good of a ROM to keep from sharing on XDA.
Once again, thanks for your opinion. /S

EBeatFLA said:
Those of us who initially tested this GSI did not think it was ready for other devices, as it will not boot on LOS based vendors. @king1990 built this for our Axon 7 community, and it was just way too good of a ROM to keep from sharing on XDA.
Once again, thanks for sharing your opinion. /S
Click to expand...
Click to collapse
My opinion is that this is a GSI for a treble devices,so thats why i thought this should be in the treble forum.
And yes im avoiding treble system for my axon 7 because its a mess.

My opinion is this ROM is hands down, THE best GSI I've used in all of my testing, and by a long shot. Seeing as how this is only the first build, I'm excited to see how future builds will improve.
The difference between using this ROM with it's suggested installation, and other ROMs of the past is like night and day, including pre-treble ROMs. This is definitely the whole package when it comes to custom ROMs. Full of options, that work, and a UI that flies with no lag, without compromising battery life.
See screenshots of estimated 6 hours SOT, almost 2 hours of which I was on a Viber phone call through Bluetooth headphones while at the same time using my phone to message on Telegram.
Where others came up short, Liquid Remix just works. I'm sure there will be many other posts like mine, giving praises to this ROM. @king1990 Thank you again, so much for building this for us. It was a much needed relief from many headaches of searching and testing and fixes and testing... Lol

XDA only rendering 1 of 2 screenshots. Here is the second one.

Followed the installation guide:
Clean flash is recommended:
Unlock the Bootloader first , and flash universial bootstack and modem before anything
1. Go to TWRP
2. Wipe System, Vendor, Data, Cache, and Dalvik Cache. Internal Storage wipe is not needed
3. Flash Kranoner's vendor (Recommended vendor) or Nfound vendor or flash another vendor of your choice. LineageOS vendor and anything based on LineageOS, like DotOS vendor will not work.
4. Extract the ROM .zip file to get system.img , flash it in system partition. , Boot and check the ROM
5. Reboot to recovery after flashing ROM and then Factory reset then flash Opengapps. Nano or below is recommended
6. Reboot to system
7. After first boot, you will need to flash NFC/Hotspot fix by @raystef66 and @kountry83 .
8. Install Magisk 18.0
However, every time boots into system, it shows error:
Android System
There's internal problem with your device. Contact your manufacturer for details.
Does it mean Vendor Partition is not right?

ccfly888 said:
However, every time boots into system, it shows error:
Android System
There's internal problem with your device. Contact your manufacturer for details.
Does it mean Vendor Partition is not right?
Click to expand...
Click to collapse
This is a false error, and is very common when using a GSI. There is nothing wrong and it affects nothing. It is a minor annoyance to click OK, only on boot.
Sometimes this will go away depending on what vendor or kernel you are using. Hopefully it may go away in the future with a better vendor or if a future Liquid build works with other vendors.

ccfly888 said:
Followed the installation guide:
Clean flash is recommended:
Unlock the Bootloader first , and flash universial bootstack and modem before anything
1. Go to TWRP
2. Wipe System, Vendor, Data, Cache, and Dalvik Cache. Internal Storage wipe is not needed
3. Flash Kranoner's vendor (Recommended vendor) or Nfound vendor or flash another vendor of your choice. LineageOS vendor and anything based on LineageOS, like DotOS vendor will not work.
4. Extract the ROM .zip file to get system.img , flash it in system partition. , Boot and check the ROM
5. Reboot to recovery after flashing ROM and then Factory reset then flash Opengapps. Nano or below is recommended
6. Reboot to system
7. After first boot, you will need to flash NFC/Hotspot fix by @raystef66 and @kountry83 .
8. Install Magisk 18.0
However, every time boots into system, it shows error:
Android System
There's internal problem with your device. Contact your manufacturer for details.
Does it mean Vendor Partition is not right?
Click to expand...
Click to collapse
Ignore it! It's nothing serious. And yes it's the vendors fault. Our vendor is a mess!

EBeatFLA said:
This is a false error, and is very common when using a GSI. There is nothing wrong and it affects nothing. It is a minor annoyance to click OK, only on first boot.
Sometimes this will go away depending on what vendor or kernel you are using. Hopefully it may go away in the future with a better vendor or future GSI build.
Click to expand...
Click to collapse
Thanks for the quick reply.
Indeed, I clicked OK and it just moves on. But it shows up on every reboot. Kind of annoying.

ccfly888 said:
Thanks for the quick reply.
Indeed, I clicked OK and it just moves on. But it shows up on every reboot. Kind of annoying.
Click to expand...
Click to collapse
Sorry, bad wording, i should have said "on boot", not "on first boot". You get used to it.

EBeatFLA said:
Sorry, bad wording, i should have said "on boot", not "on first boot". You get used to it.
Click to expand...
Click to collapse
It is minor issue. I certainly can live with that.

[ROM][10.0.0_r40]Lineage OS 17.1 [UNOFFICIAL][rolex]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
LineageOS is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
What's working:
Boot
Bluetooth
Camera / Camcorder
Double Tap to Wake
IR Blaster
RIL (LTE/Dual SIM/SMS)
FM Radio
VoLTE
GPS
WiFi
WiFi Hotspot
USB (ADB/MTP/PTP)
Video Playback
Touch
Sensors
SELinux enforcing
What's not working:
You tell me.
Maybe encryption.
Installation instructions
Download the zip(s).
Install a compatible Recovery, i.e. with vendor support.
Perform a NANDroid backup of your current ROM (Optional)
Wipe data if you come from different ROM. Don't needed if you do an upgrade from LOS 17.1.
Wipe system, cache and vendor partitions.
Flash ROM.
Optional: Install the Google Apps addon package.
Optional: Install Magisk for Root.
Downloads
If you don't have Recovery with vendor support: Unofficial TWRP by nick00007
Rom: https://rolex.yurikoles.com/
Official GApps: Open GApps 10.0 arm64
Latest radio firmware: Xiaomi Firmware Updater by yshalsager
Bonus: I prefer aroma GApps (you choose what to install): Unofficial Open GApps 10.0 arm64 aroma
Thanks To
* AOSP
* Lineage OS Team
* Thago for Triton-kernel
* nick00007 for device and vendor trees, recovery.
XDA:DevDB Information
Lineage OS 17.1 ROM, ROM for the Xiaomi Redmi 4a
Contributors
yurikoles, Thago, nick00007
Source Code: https://github.com/xiaomi-rolex
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 17.1
Stable Release Date: 2020-06-27
Created 2020-06-27
Last Updated 2020-07-10

Reserved
Changelog:
2020-07-10:
July security patch, r10.0.0_r40.
2020-07-04-2:
June security patch, r10.0.0_r39.
2020-07-04:
Sync from LOS 17.1.
2020-07-01:
Sync from LOS 17.1.
Uploaded a correct recovery to the same dir on my server. Updated OP post accordingly. Thanks to @michal778 for a good bug report.
Added instructions on formatting /data with F2FS for a maximum performance.
2020-06-28:
Sync device and vendor trees from RevengeOS.
Sync from LOS 17.1.
Disable debug during build, so it should be faster now.
2020-06-27:
Initial release.

Reserved

What's the difference from this?
https://forum.xda-developers.com/redmi-4a/development/rom-lineage-os-17-0-unofficial-t3987561

MaxisMan said:
What's the difference from this?
https://forum.xda-developers.com/redmi-4a/development/rom-lineage-os-17-0-unofficial-t3987561
Click to expand...
Click to collapse
My version is shipped with Triton kernel and I hope to provide more frequent updates.

i m using android10 rom with orangefox recovery can i flash directly n the recommended unofficial open gapps size is big can i install official open gapps

Roshan Gangmei said:
i m using android10 rom with orangefox recovery can i flash directly n the recommended unofficial open gapps size is big can i install official open gapps
Click to expand...
Click to collapse
I had updated my post. Any recovery with vendor support or any Android 10 arm64 should work. It's always recommended doing clean flash, e.g. full wipe when you switch between different ROMs. You may still try to do keep your data partition, but please don't report any bugs until you can reproduce them with clean flash.

Do I have a bluetooth connection problem for sound devices?

Any changelog 28/06 from 27/06? Greeting from Russia )

yurikoles said:
My version is shipped with Triton kernel and I hope to provide more frequent updates.
Click to expand...
Click to collapse
Great. :good:

suzver said:
Any changelog 28/06 from 27/06? Greeting from Russia )
Click to expand...
Click to collapse
Greetings from Ukraine, @suzver.
Thanks for reminder, I had added changelog to second post.

Thanks for this awesome ROM,its smooth n fast.everything works perfectly without a glitch.what I did first was changing orangefox recovery to op unofficial twrp via team win apk,without formatting it shows error in twrp n flashing with magisk it did boot up but to twrp again n flash again without it yes it works.I m okay with less customizations.BTW I m using official open gapps nano.Hats off to you.

What you mean by wipe vendor partition"s"?
I understand that I should wipe system, data, cache, dalvik, vendor?

Well, a huge disappointment can't flash lineage-17.1-20200628-UNOFFICIAL-rolex.zip at all. I'm using miui 9.2.6.0 and twrp that you posted. Can't wipe vendor because it's not showing in wipe list, so I'm wiping rest. It's says flashing was successful, but gapps giving error 30 and tells me my android is 7.1.2! Something is wrong. I'm doing clean flash from miui. It's not installing at all, so OS is broken or twrp posted. You tried that twrp?
EDIT: Yup it's twrp thing, i used another that allowed me to wipe vendor, and gapps now flashing. Sir, next time better check please.

WSTxda said:
Do I have a bluetooth connection problem for sound devices?
Click to expand...
Click to collapse
Is this a question? I don't know what you have on your phone. As for me, I didn't check BT audio yet, but I hope to have some BT headset available soon.

michal778 said:
Well, a huge disappointment can't flash lineage-17.1-20200628-UNOFFICIAL-rolex.zip at all. I'm using miui 9.2.6.0 and twrp that you posted. Can't wipe vendor because it's not showing in wipe list, so I'm wiping rest. It's says flashing was successful, but gapps giving error 30 and tells me my android is 7.1.2! Something is wrong. I'm doing clean flash from miui. It's not installing at all, so OS is broken or twrp posted. You tried that twrp?
EDIT: Yup it's twrp thing, i used another that allowed me to wipe vendor, and gapps now flashing. Sir, next time better check please.
Click to expand...
Click to collapse
Thanks for report, @michal778 and sorry for that. I don't remember where I got recovery that I had on my phone. But I found a recommended recovery on 4PDA, I had uploaded it to the same dir on my server and updated OP.
I had double-checked that I get working LOS 17.1 + GApps with it, by flashing MIUI 10.2.3.0 via fastboot first.

Bluetooth work fine with my Redmi AirDots after clean flash lineage-17.1-20200628-UNOFFICIAL-rolex.zip

yurikoles said:
Thanks for report, @michal778 and sorry for that. I don't remember where I got recovery that I had on my phone. But I found a recommended recovery on 4PDA, I had uploaded it to the same dir on my server and updated OP.
I had double-checked that I get working LOS 17.1 + GApps with it, by flashing MIUI 10.2.3.0 via fastboot first.
Click to expand...
Click to collapse
I flashed directly from crdroid 6.7 got some minor issue in twrp as mentioned in my previous post,instead of flashing fastboot miui 10.2.3 can we use minimal firmware of the same(size about41mb) in future.

Sir congratulations for the great ROM! Any chance of this ROM becoming official?

Roshan Gangmei said:
I flashed directly from crdroid 6.7 got some minor issue in twrp as mentioned in my previous post,instead of flashing fastboot miui 10.2.3 can we use minimal firmware of the same(size about41mb) in future.
Click to expand...
Click to collapse
Yes, sure. You may grab one here. I had updated OP, thanks.

[ROM][UNOFFICIAL][7.1.2_r36][alice] crDroid 3.8.9 [STABLE]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*Disclaimer
*
* Your warranty is... still valid?
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! [U]YOU[/U] are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Flashing Instructions:
Pre-installation:
Recommended TWRP (Download from here)
GApps (optional): https://opengapps.org/ or https://bitgapps.github.io/ (<- recommended as they're minimal and have Google Play Services' battery optimization). Remember also to choose ARM64 architecture for android 7.1.2 version.
Magisk (optional as well) - (Download from here)
First time installing (aka clean flash):
0. It's mandatory to flash B895/B896's update if you haven't installed it already! (if yes, skip this step!)
1. Reboot to recovery.
2. Wipe dalvik, cache, cust, data and system partitions. Then, reboot to recovery again.
3. Flash ROM.
4. Flash GApps, Magisk and whatever you want.
5. Wipe dalvik and cache.
6. Reboot and enjoy!
Update installation (aka dirty flash):
1. Reboot to recovery.
2. Wipe cache, dalvik and system.
3. Flash ROM and whatever else you flashed the other time and that is storaged on /system partition.
4. Reboot and enjoy your update!
Sources:
Device tree: Device tree
Kernel: Kernel
Vendor: Vendor
Download zone:
ROM: Stable MEGA folder
This is a stable final build from the work I've done to this phone while I've been using it since my daily phone broke and until I bought a new one. Don't expect too much updates of this since there isn't too much stuff to fix, besides the crDroid team doesn't merge the newer security patches since months!
I also know that there is another thread for crDroid Nougat, but that's for an old build. This ROM contains all the source & device trees that has been made since then (and no, you can't dirty flash to this).
Needed firmware stack:
B895 (TWRP flashable)
B896 (TWRP flashable)
Known issues:
SELinux is permissive.
Watching videos at 7[email protected] is laggy on YouTube -> see them at 480p instead.
Use MagiskHide to pass SafetyNet and Google Play Store's certification.
Disable Wi-Fi/Bluetooth scanning in location's settings in order to fix deep-sleep issue!
Encryption.
All the other stuff not mentioned above -> working!
Special thanks to:
- DarkJoker360
- surdu_petru
- TheSpartann
- haky86
- XTutorials
- XePeleato
- OldDroid
- Meticulus
Version Information:
ROM OS Version: 3.8.9 (Android 7.1.2 N)
Kernel: Linux 3.10.108
Status: Stable
Release date: 2021-08-16
Visit official website @ crDroid.net
TG group for alice
crDroid Community Telegram
Donate to masemoel
Donate to help our team paying server costsIf you like this project, remember to hit the Thanks button

(Reserved)

Thank you! I thought development was dead for this phone :good:

Thanks for making this ROM but does ussd codes work fine on it?

razorfancy said:
Thanks for making this ROM but does ussd codes work fine on it?
Click to expand...
Click to collapse
I haven't tried them, but they should if they work on other ROMs as well. This ROM support LTE and 3G, it's based on Viper's tree.
Sent from my Redmi K30 5G using XDA Labs

masemoel said:
Code:
/*Disclaimer
*
* Your warranty is... still valid?
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! [U]YOU[/U] are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Flashing Instructions:
Pre-installation:
Recommended TWRP (Download from here)
GApps (optional): https://opengapps.org/ or https://bitgapps.github.io/ (<- recommended as they're minimal and have Google Play Services' battery optimization). Remember also to choose ARM64 architecture for android 7.1.2 version.
Magisk (optional as well) - (Download from here)
First time installing (aka clean flash):
0. It's mandatory to flash B895/B896's update if you haven't installed it already! (if yes, skip this step!)
1. Reboot to recovery.
2. Wipe dalvik, cache, cust, data and system partitions. Then, reboot to recovery again.
3. Flash ROM.
4. Flash GApps, Magisk and whatever you want.
5. Wipe dalvik and cache.
6. Reboot and enjoy!
Update installation (aka dirty flash):
1. Reboot to recovery.
2. Wipe cache, dalvik and system.
3. Flash ROM and whatever else you flashed the other time and that is storaged on /system partition.
4. Reboot and enjoy your update!
Sources:
Device tree: Device tree
Kernel: Kernel
Vendor: Vendor
Download zone:
ROM: Stable MEGA folder
This is a stable final build from the work I've done to this phone while I've been using it since my daily phone broke and until I bought a new one. Don't expect too much updates of this since there isn't too much stuff to fix, besides the crDroid team doesn't merge the newer security patches since months!
I also know that there is another thread for crDroid Nougat, but that's for an old build. This ROM contains all the source & device trees that has been made since then (and no, you can't dirty flash to this).
Needed firmware stack:
B895 (TWRP flashable)
B896 (TWRP flashable)
Known issues:
SELinux is permissive.
Video recording is not working properly on some apps like WhatsApp or Telegram, but it does on others like Instagram, TikTok or the prebuilt camera.
Watching videos at [email protected] is laggy on YouTube -> see them at 480p instead.
Use MagiskHide to pass SafetyNet and Google Play Store's certification.
Disable Wi-Fi/Bluetooth scanning in location's settings in order to fix deep-sleep issue!
Encryption.
All the other stuff not mentioned above -> working!
Special thanks to:
- DarkJoker360
- surdu_petru
- TheSpartann
- haky86
- XTutorials
- XePeleato
- OldDroid
- Meticulus
Version Information:
ROM OS Version: 3.8.9 (Android 7.1.2 N)
Kernel: Linux 3.10.108
Status: Stable
Release date: 2020-10-16
Visit official website @ crDroid.net
TG group for alice
crDroid Community Telegram
Donate to masemoel
Donate to help our team paying server costsIf you like this project, remember to hit the Thanks button
Click to expand...
Click to collapse
What is this new ROM based on? LineageOS? AOSP? Supporting Substratum? Better kernel and less latency?

tberma said:
What is this new ROM based on? LineageOS? AOSP? Supporting Substratum? Better kernel and less latency?
Click to expand...
Click to collapse
crDroid is based on LineageOS, and yes, it supports substratum themes.
About battery... I felt that it was slightly better than with LOS, but not a huge difference. For such an old battery, I would suggest using Greenify in order to save battery and processes in RAM. With Greenify, I could do about 4h15mins of screen, which I think it's not bad (I've only used this phone about a month, I bought it very cheap in a second-hand shop, maybe I bought a phone with battery ****ed, who knows...).
I also made few modifications to the existing kernel that helped watching and recording videos with less lag :laugh:

masemoel said:
crDroid is based on LineageOS, and yes, it supports substratum themes.
About battery... I felt that it was slightly better than with LOS, but not a huge difference. For such an old battery, I would suggest using Greenify in order to save battery and processes in RAM. With Greenify, I could do about 4h15mins of screen, which I think it's not bad (I've only used this phone about a month, I bought it very cheap in a second-hand shop, maybe I bought a phone with battery ****ed, who knows...).
I also made few modifications to the existing kernel that helped watching and recording videos with less lag :laugh:
Click to expand...
Click to collapse
What is the best Viper OS or this ROM?
Note: I don't trust Lineage OS based ROMs anyway because as far as I know they don't fully support substratum themes and sometimes they don't work at all.

tberma said:
What is the best Viper OS or this ROM?
Note: I don't trust Lineage OS based ROMs anyway because as far as I know they don't fully support substratum themes and sometimes they don't work at all.
Click to expand...
Click to collapse
That's up to each user, I motivate you to try both.
Sent from my Redmi K30 5G using XDA Labs

Bro can u make oreo stable for this device? Itll be great if sensors, rils nd bt were fixed, could u please try?

Pradip4130 said:
Bro can u make oreo stable for this device? Itll be great if sensors, rils nd bt were fixed, could u please try?
Click to expand...
Click to collapse
I don't think so, sincerly.
Sent from my Redmi K30 5G using XDA Labs

Hello,
so I have installed this rom and I like it so far. It is really fast and smooth, even better than stock rom and LineageOS (which was laggy). Only problem I have is that NFC is not working. So is it just me or is it generally not working in this rom?

svec52 said:
Hello,
so I have installed this rom and I like it so far. It is really fast and smooth, even better than stock rom and LineageOS (which was laggy). Only problem I have is that NFC is not working. So is it just me or is it generally not working in this rom?
Click to expand...
Click to collapse
I couldn't get NFC working on certain apps for some reason... Sorry I forgot to add that to known issues.

Thank You for this ROM and particulary for the working USSD Codes. Please I want to know if it is possible to disable the name of the quick tiles, i d'ont see any option for it crDoid Settings ?

hi
does this work on honor 4c?

mobinshahidi said:
hi
does this work on honor 4c?
Click to expand...
Click to collapse
They're different phones.
If you've flashed other alice ROMs and booted on your device, it's ok.
If not (the most possible case), then it's no use flashing this ROM.
Sent from my Redmi K30 5G using XDA Labs

mobinshahidi said:
hi
does this work on honor 4c?
Click to expand...
Click to collapse
آره نصب میشه
ولی آخرین نسخه لاین ایج ۱۴ دولوپر دارک جوکر نصب کن
Yes worked on honor 4c
But latest lineage14 darkjoker better and stable than this ROM

mahdiygh said:
آره نصب میشه
ولی آخرین نسخه لاین ایج ۱۴ دولوپر دارک جوکر نصب کن
Yes worked on honor 4c
But latest lineage14 darkjoker better and stable than this ROM
Click to expand...
Click to collapse
link?

This ROM works very good. Thanks for your effort.

Hi...how about performance of this rom as compared to dot Os 7.1.2?
Have anyone tried both rom yet?
Please answer me

[ROM][NIPPON GSI Port][Alpha][R/A] MIUI 13 Android 12 & 11

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
MIUI 13 for Galaxy S9/S9 Plus with Project Treble - Porting R/A
- Warning this is not for daily use.
- GSI made by Nippon, credit goes to him.
-MIUI 13 Port Alpha #1 without R/A is Android 11, with R/A is Android 12.
Features:
- Full MIUI 13 firmware from NIPPON GSI Global.
- Added a brightness overlay to try and improve it but more work needs to be done.
- Modified vendor and disabled KeyStore.
Working:
- RIL.
- SD Card.
- Touch.
- Hard press button.
Bugs:
- Most likely more stuff I haven't noticed yet.
Warning:
- The ROM, has not yet been tested on Samsung Galaxy S9 Plus, we look for beta testers. To propose yourself join on our telegram channels.
Guide [HOW TO INSTALL IT]:
1. Extract the zip, and save it on SD Card or memory
2. Do proper backup of your important vids, pics, files, etc.
3. Reboot to recovery
4. Clean wipe (Dalvik, system,data,vendor,cache)
5.[T.2] Flash vendor.img & boot.img for your device.
6. Flash system.img
7. Flash permissiver, zygote, etc. if needed.
8. Reboot and good luck.
Instructions only for Samsung S9 Plus users:
-Reboot to recovery
-Wipe system, cache, dalvik and data
-Flash CrDroid Android Q (CrDroid)
-Flash System img from miui
-Mount vendor in twrp and go to /vendor/lib64/hw/ and rename the keystore file with a .bak at the end
Downloads:
MIUI13 R/A
MIUI13
Okami Project [Tips, Fixs, Extras]:
Project
Kernel Source:
Source
Tips:
-[T.2] In case, it does not go for Samsung Galaxy S9 Plus users, use another vendor, possibly AOSP and/or CrDroid or the stock vendor.
-In case, it does not go for Samsung Galaxy S9 Plus users, use another kernel, possibly AOSP and/or CrDroid.
-To report bugs you will have to be clear and share the log.txt.
Credits:
[email protected] for Vendor & Boot.
Social Network:
Telegram Group
Telegram Channel
Telegram Support Bot

Thread re-opened.

can you post the link for Android 11 of this thread?
[CLOSED][ROM][NIPPON GSI Port][Alpha] MIUI 13 Android 11
DISCLAIMER * Your warranty is now void. * We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels. * You do it at your own risk and take the responsibility upon yourself and you are not to...
forum.xda-developers.com

vwong said:
can you post the link for Android 11 of this thread?
[CLOSED][ROM][NIPPON GSI Port][Alpha] MIUI 13 Android 11
DISCLAIMER * Your warranty is now void. * We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels. * You do it at your own risk and take the responsibility upon yourself and you are not to...
forum.xda-developers.com
Click to expand...
Click to collapse
I just update this Thread, if you go to the beginning, in the part where there is Downloads, you find MIUI13, careful that MIUI 13 R/A is with Android 12.

I have star2lte (S9+) currently downloading it.
I'll post a feedback when it's done.
EDIT:
Device boots to download mode.
What I did:
-Wiped system, cache, dalvik and data
-Flashed CrDroid Android Q (CrDroid)
-Flashed System img from miui13 R/A
- Renaming /vendor/lib64/hw/ keystore file results with Error 1.

Does it work on G9650?

Do we have screenshots

I tried it and there a weird hole punch at the top other then that is working ig

Supernova| said:
I tried it and there a weird hole punch at the top other then that is working ig
Click to expand...
Click to collapse
Does it work on G9650?

I tried it for s9+ there's a weird hole at the top, it recognises the sim card but calls doesn't work. Other than that it works.

Coach876_ said:
I tried it for s9+ there's a weird hole at the top, it recognises the sim card but calls doesn't work. Other than that
Click to expand...
Click to collapse
Coach876_ said:
I tried it for s9+ there's a weird hole at the top, it recognises the sim card but calls doesn't work. Other than that it works.
Click to expand...
Click to collapse
s9 plus with exynos or snapdragon?

Exynos

F17mous said:
I have star2lte (S9+) currently downloading it.
I'll post a feedback when it's done.
EDIT:
Device boots to download mode.
What I did:
-Wiped system, cache, dalvik and data
-Flashed CrDroid Android Q (CrDroid)
-Flashed System img from miui13 R/A
- Renaming /vendor/lib64/hw/ keystore file results with Error 1.
Click to expand...
Click to collapse
From an user on support:
I installed the rom on galaxy s9 + according to the instructions, coming after android 11, i had to install the vendor on android 10, for crdroid 10. After installing crdroid, I flashed system.img and reboot. Initially the phone went into download mode, then I went back into recovery mode and flashed boot.img. This time it was lucky, the phone opened.
Follow this Guy.

Guilhermegh7 said:
Does it work on G9650?
Click to expand...
Click to collapse
I don't think because it's for Exynos, but you can use the system.img and replace vendor.img and boot.img with your for the snapdragon. Use AOSP or stock.

Supernova| said:
I tried it and there a weird hole punch at the top other then that is working ig
Click to expand...
Click to collapse
Use Okami Project, and the fixes you find in the telegram channel.

Badger50 said:
Тема вновь открыта.
Click to expand...
Click to collapse
я извняюсь , а означает что R/A?

it cant use on A3 2017
although using cr boot vendor still stuck on first logo
MIUI 12.5.3 worked but no sim detect

Does it work on G965N device?

AlexanderDev said:
DISCLAIMER
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
MIUI 13 for Galaxy S9/S9 Plus with Project Treble - Porting R/A
- Warning this is not for daily use.
- GSI made by Nippon, credit goes to him.
-MIUI 13 Port Alpha #1 without R/A is Android 11, with R/A is Android 12.
Features:
- Full MIUI 13 firmware from NIPPON GSI Global.
- Added a brightness overlay to try and improve it but more work needs to be done.
- Modified vendor and disabled KeyStore.
Working:
- RIL.
- SD Card.
- Touch.
- Hard press button.
Bugs:
- Most likely more stuff I haven't noticed yet.
Warning:
- The ROM, has not yet been tested on Samsung Galaxy S9 Plus, we look for beta testers. To propose yourself join on our telegram channels.
Guide [HOW TO INSTALL IT]:
1. Extract the zip, and save it on SD Card or memory
2. Do proper backup of your important vids, pics, files, etc.
3. Reboot to recovery
4. Clean wipe (Dalvik, system,data,vendor,cache)
5.[T.2] Flash vendor.img & boot.img for your device.
6. Flash system.img
7. Flash permissiver, zygote, etc. if needed.
8. Reboot and good luck.
Instructions only for Samsung S9 Plus users:
-Reboot to recovery
-Wipe system, cache, dalvik and data
-Flash CrDroid Android Q (CrDroid)
-Flash System img from miui
-Mount vendor in twrp and go to /vendor/lib64/hw/ and rename the keystore file with a .bak at the end
Downloads:
MIUI13 R/A
MIUI13
Okami Project [Tips, Fixs, Extras]:
Project
Kernel Source:
Source
Tips:
-[T.2] In case, it does not go for Samsung Galaxy S9 Plus users, use another vendor, possibly AOSP and/or CrDroid or the stock vendor.
-In case, it does not go for Samsung Galaxy S9 Plus users, use another kernel, possibly AOSP and/or CrDroid.
-To report bugs you will have to be clear and share the log.txt.
Credits:
[email protected] for Vendor & Boot.
Social Network:
Telegram Group
Telegram Channel
Telegram Support Bot
Click to expand...
Click to collapse
Not working on s9+ the android 12

my phone is mi 8 pro codename is equuleus.
can i flash this rom?

[ROM][13][starlte/star2lte][OFFICIAL] Evolution X [05/07/2023]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Evolution X 7.x for the Samsung Galaxy S9 / S9+ [starlte / star2lte]
Code:
/*
* Your warranty is void. Or vaild, probably?
*
* I am not responsible for bricked devices, dead SD cards, Ebolation X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modificiations, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
Living, Breaking, Keep Evolving.
Pixel UI, customization and more, we are Evolution X!
- Team Evolution X -
@joeyhuab
@RealAkito
@AnierinB
Reach us on Twitter! @EvolutionXROM
What are our features?
- Just flash and check "The Evolver". We have tons of features combined together from different ROMs."
VoLTE
You tell me!
VoWIFI
Encryption
DO NOT FLASH GAPPS, ALREADY INCLUDED
First Time Install / Clean Flash
1. Download the proper flashable ZIP for your device
2. Reboot to TWRP, flash patched TWRP
3. Wipe Dalvik/Cache. System, Data, Vendor, OMR, ODM, Preload
4. Format Data
5. Flash ROM.zip, Magisk (Optional), DFEv2 (Optional)
6. Reboot to System and #KeepEvolving
Update / Dirty Flash
1. Reboot to Recovery
2. Download the proper flashable ZIP for your device
3. Reboot to Recovery
4. Flash ROM.zip
5. Reboot to System and #KeepEvolving
Download
Donate to me! / Official Chat / Device Support

Android OS version: 13.0.0-r43
Security patch level: May 2023
Build Author: Pham Nguyen Gia Khiem
Source Code: https://github.com/Evolution-X
Devices + Kernel source Code: https://github.com/Cyderxxv
ROM Developer: joeyhuab

Hey great rom man, but there is an issue, I don't know whether it is in the rom or android 12 or my device but Samsung S9+ has widevine L1 certification but as soon as I installed this rom, it got downgraded to L3. Can you fix this issue?
I tried formatting from system setting as well as from the recovery. I flashed the original firmware as well again. There it showed L1 certification and when I installed this rom it was again L3. I want to stay at android 12. Please find a fix to this issue

sidkl said:
Hey great rom man, but there is an issue, I don't know whether it is in the rom or android 12 or my device but Samsung S9+ has widevine L1 certification but as soon as I installed this rom, it got downgraded to L3. Can you fix this issue?
I tried formatting from system setting as well as from the recovery. I flashed the original firmware as well again. There it showed L1 certification and when I installed this rom it was again L3. I want to stay at android 12. Please find a fix to this issue
Click to expand...
Click to collapse
L1 won't work on AOSP atm.

great rom very fast,. pls check camera video recording i thing its a bug after 10 to 15 seconds of video recording camera is crashing. installing deferent cam from play store still same its crashing. thank you.

Can this ROM work with dual SIM? Like my phone (as per signature).

CyderXDA said:
Evolution X 7.x for the Samsung Galaxy S9 / S9+ [starlte / star2lte]
Code:
/*
* Your warranty is void. Or vaild, probably?
*
* I am not responsible for bricked devices, dead SD cards, Ebolation X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modificiations, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
Living, Breaking, Keep Evolving.
Pixel UI, customization and more, we are Evolution X!
- Team Evolution X -
@joeyhuab
@peaktogoo (Now RealAkito)
@AnierinB
Reach us on Twitter! @EvolutionXROM
What are our features?
- Just flash and check "The Evolver"
VoLTE
You tell me!
VoWIFI
Encryption
DO NOT FLASH GAPPS, ALREADY INCLUDED
First Time Install / Clean Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Wipe Dalvik/Cache. System, Data, Vendor
4. Format Data (Optional)
5. Flash the ROM
6. Reboot to System
7. Reboot to Recovery (Optional)
8. Flash Magisk (Optional)
9. Reboot to System and #KeepEvolving
Update / Dirty Flash
1. Reboot to Recovery
2. Download the proper flashable ZIP for your device
3. Reboot to Recovery (Optional)
4. Flash Magisk (Optional)
5. Flash the ROM
6. Reboot to System and #KeepEvolving
Download
Donate to me! / Official Chat / Device Support

Android OS version: 13.0.0-r3
Security patch level: August 2022
Build Author: Pham Nguyen Gia Khiem
Source Code: https://github.com/Evolution-X
Devices + Kernel source Code: https://github.com/cyderdummytrees
ROM Developer: joeyhuab
Click to expand...
Click to collapse
"Download" button doesnt work

pawix0007 said:
"Download" button doesnt work
Click to expand...
Click to collapse
It's works And press the "i" button instead of pressing into thriteen button

Can Qualcomm Snapdragon 845 brush

Trainer-YF said:
Can Qualcomm Snapdragon 845 brush
Click to expand...
Click to collapse
No

CyderXDA said:
Evolution X 7.x for the Samsung Galaxy S9 / S9+ [starlte / star2lte]
Code:
/*
* Your warranty is void. Or vaild, probably?
*
* I am not responsible for bricked devices, dead SD cards, Ebolation X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modificiations, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
Living, Breaking, Keep Evolving.
Pixel UI, customization and more, we are Evolution X!
- Team Evolution X -
@joeyhuab
@peaktogoo (Now RealAkito)
@AnierinB
Reach us on Twitter! @EvolutionXROM
What are our features?
- Just flash and check "The Evolver"
VoLTE
You tell me!
VoWIFI
Encryption
DO NOT FLASH GAPPS, ALREADY INCLUDED
First Time Install / Clean Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Wipe Dalvik/Cache. System, Data, Vendor
4. Format Data (Optional)
5. Flash the ROM
6. Reboot to System
7. Reboot to Recovery (Optional)
8. Flash Magisk (Optional)
9. Reboot to System and #KeepEvolving
Update / Dirty Flash
1. Reboot to Recovery
2. Download the proper flashable ZIP for your device
3. Reboot to Recovery (Optional)
4. Flash Magisk (Optional)
5. Flash the ROM
6. Reboot to System and #KeepEvolving
Download
Donate to me! / Official Chat / Device Support

Android OS version: 13.0.0-r3
Security patch level: August 2022
Build Author: Pham Nguyen Gia Khiem
Source Code: https://github.com/Evolution-X
Devices + Kernel source Code: https://github.com/cyderdummytrees
ROM Developer: joeyhuab
Click to expand...
Click to collapse
Chrome/ Brave Browser keeps crashing, what can i do?

pawix0007 said:
Chrome/ Brave Browser keeps crashing, what can i do?
Click to expand...
Click to collapse
this is the first release so expect lot of bugs. im reverting back to official pixel experience 12 for daily driver a very stable rom.

Found that Bluetooth does not pair with my watch. On 12 it worked perfectly. Do I have to do a complete wipe to roll back?

Rebel25 said:
Found that Bluetooth does not pair with my watch. On 12 it worked perfectly. Do I have to do a complete wipe to roll back?
Click to expand...
Click to collapse
try to full wipe then reinstall or revert back to android 12 and wait for the stable release of this rom untill they fix bug

john316v said:
great rom very fast,. pls check camera video recording i thing its a bug after 10 to 15 seconds of video recording camera is crashing. installing deferent cam from play store still same its crashing. thank you.
Click to expand...
Click to collapse
its a bug wait for the stable release and fixes. this is the first release so expect a bug.

@echo.bat said:
try to full wipe then reinstall or revert back to android 12 and wait for the stable release of this rom untill they fix bug
Click to expand...
Click to collapse
I'm good, it's just bluetooth. I got this update via OTA last night.

Also, SD card dont show up once you load the rom. I'm sure the sd card works fine because im able to access it from trwp recovery

How do I roll back to 12? This is too much bugs and crashes and I don't like this much bleeding edge.
A constant fresh update supply for security patches is fine but when same method is applied to new OS code and such, it's usually a bad idea to mainstream it.
I suggest you guys make an option for us users where we can choose whether we want to be on stable branch or bleeding edge.
But again my question, how do I roll back to 12? I can't find the .zip file to download.

Minor bug once the battery is empty & phone shuts down:
When I plug in the charger the % of charged battery remains at 0% and gets updated only upon pressing the power button for a short time.

Evolution X 7.0 | Android 13 Update is now available!
#NOTE: DO NOT dirty flash from 12.1 builds!
Noticable Changelogs:
- Fixed FC in some apps
- Amogus icon
- Back to ルミン with some changes
Full changelogs can be found at here
If you like my work, consider donating me at Paypal!
Enjoy and #KeepEvolving!

CyderXDA said:
Evolution X 7.0 | Android 13 Update is now available!
#NOTE: DO NOT dirty flash from 12.1 builds!
Noticable Changelogs:
- Fixed FC in some apps
- Amogus icon
- Back to ルミン with some changes
Full changelogs can be found at here
If you like my work, consider donating me at Paypal!
Enjoy and #KeepEvolving!
Click to expand...
Click to collapse
Should I then wipe and reflash even if I got the update via OTA?

Database Develop

welcome