Related
Here I bring to you the official Havoc-os 4.X ROM Android 11 and fully functional on Redmi 8
The intention of this post is to make a step-by-step tutorial on the installation of this excellent GSI ROM on Redmi 8 and give assistance in the installation process
All the development credits for this wonderful ROM go to the Havoc team
@Ruturaj Kadam
@jhenrique09
@SKULSHADY
Remember I am not a developer, if you are presenting any bugs let us know and you can contact the Havoc team on Telegram
I am not responsible for any damage caused to your device by not following the steps or negligence at the time of this process, All the steps were carried out and tested on my personal device and are confirmed, My device Redmi 8 3/32, the version that i tested Havoc-OS-v4.5-20210208-Official-arm64-ab.img.xz
Bugs
videos recorded with the default camera do not play
Update: Install the NGCam_7.4.104-v1.8-fix.apk Once the application is installed open it take a photo close the application, this will create a folder in the SD called Gcam, inside the Gcam folder create a folder and call it Config7 and inside this place the XML file Redmi 8 GCam 7.4.104.314953318 G_Modder.xml restart the application and you're done
the only bugs that have is slow motion record not work for now
Automatic brightness does not work
Update: to fix the automatic brightness on your device, after installing the ROM, put in the folder SYSTEM-OVERLAY the treble-overlay-xiaomi-redmi 8.apk and set the permission for the apk on 644 ( use root explorer ) and reboot ..... problem solved
the necessary files are at the end of the tutorial
Steps
Note: I did the installation coming from Mui 12.EU, and there was no problem in the installation process or in the boot process
If you come from Miui12 .EU or any other GSI Rom go to step 4, if you come from the Rom stock follow the this steps
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%
All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Install a custon recovery, if you dont know how to, follow this post: https://c.mi.com/thread-2850424-1-0.html
4- Make wipe only to Cache, Dalvik, System, Data and Internal SD
5- Format data,( if it doesn't format the data you will have bootloop) then Reboot into Recovery
6- Copy all the files to the phone (Havoc-OS-v4.X-20200522-Official-arm64-ab.img you can find it by unpacking the zip), Magisk,Magisk Path Fix, Permisiver, Certification Patch.zip, opengapp (recommended nano or pico)
7- Install system image to system partition (on TWRP go to install-Install image-System) .
8- Flash Permisiver v5 (on TWRP go to install selec permisver_v5.zip)
9- Resize system partition to flash opengapps (on TWRP go to Wipe-Advanced Wipe-Select System on the list-Repair or Change File System-Resize)
To Root
once you have installed an resized the system
10- Flash the Magisk path fix (on TWRP go to install selec MagiskA11_PATH_fix.zip)
11- Flash Magisk (on TWRP go to install selec Magisk-v23.0.zip)
12- Flash Opengapps
1-Flash Certification Patch
1 - Make a wipe to Cache and Dalvik
1- Reboot
The boot process takes 5 to 10 minutes the first boot, in case of any problem in any of the stages you can reinstall Miui version fastboot with Mi flash tool and start again
Download link Rom image:
arm64-ab • Havoc-OS
Havoc-OS Downloads
download.havoc-os.com
OpenGapss Android 11: https://sourceforge.net/projects/opengapps/files/arm64/test/20210130/
Magisk:
Download Magisk Manager Latest Version 26.1 For Android 2023
Magisk Manager is an app which helps users to root their phone. With the help of Magisk you can run banking apps and also pass SafetyNet tests.
magiskmanager.com
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
Don't mind it, I haven't read all the article....
letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery
D
letouvetpierre said:
Don't mind it, I haven't read all the article....
Click to expand...
Click to collapse
Dont worry
Darth Inferno said:
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery
Click to expand...
Click to collapse
Okay thanks I think I will try this in the few days. Thanks for your guide !
Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer
UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...
letouvetpierre said:
UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...
Click to expand...
Click to collapse
Hi, I need to know some things to help you, what ROM did you have before flashing Havoc? do you have the bootloader unlocked? When did you use My flashtool, what method did you use?
letouvetpierre said:
Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer
Click to expand...
Click to collapse
In my particular case it was not necessary to flash vbmmeta as I comment in the OP I come from Miui12.eu, but it is necessary to avoid problems whatever the ROM you have before installing Havoc is to have the latest version of TWRP and have configured a lock pattern security in ROM access and in the flashing process I didn´t have problems
Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...
letouvetpierre said:
Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...
Click to expand...
Click to collapse
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)
Darth Inferno said:
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)
Click to expand...
Click to collapse
Hey!
I thought about something this afternoon : if I flash HavocOS with adb and fastboot, we also haven't any problems with TWRP installation ! But the problem is that I haven't found any wiki to do that and i won't transform my phone to a beta tester....
Thanks a lot for your help but I think i will wait until a custom rom of LineageOs or HavocOs...
Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .
Dragonnuu said:
Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .
Click to expand...
Click to collapse
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can help.
letouvetpierre said:
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can hel
Click to expand...
Click to collapse
Thanks for replying and trying to help but last night I managed to get havoc 4.1 is installed by flashing lineage first (using another guide from this category). I will try again to get havoc 4.1 working without flashing lineage as soon as posible because I am curious .
Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?
mwaseem851 said:
Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?
Click to expand...
Click to collapse
Magisk doesn't work on Android 11
letouvetpierre said:
Magisk doesn't work on Android 11
Click to expand...
Click to collapse
Finally managed to flash Magisk on Havoc 4.1 with the help of youtuberking (telegram and YouTube).
How: just flash Magisk path fix before magisk and it's good to go.
Want to confirm before proceeding, I find this instruction.
How to Root Xiaomi Mi 11 Ultra and Unlock Bootloader
Want to root Xiaomi Mi 11 Ultra with Magisk? Here's how to root Mi 11 Ultra along with a guide to unlock bootloader.
www.ytechb.com
I've already unlocked the bootloader, want to make sure it is safe to do so (won't brick etc)
bump, anybody successfully rooted the phone?
linnil said:
Want to confirm before proceeding, I find this instruction.
How to Root Xiaomi Mi 11 Ultra and Unlock Bootloader
Want to root Xiaomi Mi 11 Ultra with Magisk? Here's how to root Mi 11 Ultra along with a guide to unlock bootloader.
www.ytechb.com
I've already unlocked the bootloader, want to make sure it is safe to do so (won't brick etc)
Click to expand...
Click to collapse
You need to patch to boot image a and boot image b
As descriped here. This worked on my MI11
https://www.getdroidtips.com/root-xiaomi-mi-11/
linnil said:
bump, anybody successfully rooted the phone?
Click to expand...
Click to collapse
Yes. I patched my boot.img with magisk, then flashed it using "fastboot flash boot_ab magisk_patched(boot.img file name).omg"
Caveat: I bricked my device like many others after unlocking the bootloader and flashing xiaomi.eu ROM. I had to have a authorized EDL account holder flash a factory ROM (in my case I had a China variant flashed with the Global ROM), after which I flashed xiaomi.eu latest stable ROM and then rooted it.
does google pay still work after root?
xreactx said:
Caveat: I bricked my device like many others after unlocking the bootloader and flashing xiaomi.eu ROM. I had to have a authorized EDL account holder flash a factory ROM (in my case I had a China variant flashed with the Global ROM), after which I flashed xiaomi.eu latest stable ROM and then rooted it.
Click to expand...
Click to collapse
I still don't get, how you all bricked your phones? I was able to unlock (granted, after 7 days) successfully and update CN with EU-ROM... There's thread for it in this forum.
[ROM][MIUI][star/mars] Xiaomi.eu ROM for Xiaomi MI 11 Pro / Ultra
How to install Xiaomi.eu ROM for Xiaomi MI 11 Pro / Ultra We will release fastboot ROM versions until TWRP for star/mars is released TWRP RELEASED Steps to install xiaomi.eu ROM for first time from China ROM (All your data and files on...
forum.xda-developers.com
SanHelios said:
I still don't get, how you all bricked your phones? I was able to unlock (granted, after 7 days) successfully and update CN with EU-ROM...
Click to expand...
Click to collapse
Seems it was an issue with setting the active slot in the installation script. Solution is described here and since then it looks as if no more bricks occur
s3axel said:
Seems it was an issue with setting the active slot in the installation script. Solution is described here and since then it looks as if no more bricks occur
Click to expand...
Click to collapse
Oh thanks, mate. I missed that one..
Now back to issue, does it work, rooting the device the way it is descibred on that page?
SanHelios said:
Oh thanks, mate. I missed that one..
Now back to issue, does it work, rooting the device the way it is descibred on that page?
Click to expand...
Click to collapse
My pleasure
And yes, I rooted my device this way although I took the "fastboot flash boot_ab" approach instead of the separate flashing of a and b.
For updating the ROM I took the boot image before installing, patched it with Magisk, copied it back to the images installation folder and let the update script do its magic - thus I got instant-root for the update...
s3axel said:
My pleasure
And yes, I rooted my device this way although I took the "fastboot flash boot_ab" approach instead of the separate flashing of a and b.
For updating the ROM I took the boot image before installing, patched it with Magisk, copied it back to the images installation folder and let the update script do its magic - thus I got instant-root for the update...
Click to expand...
Click to collapse
well, i just rooted it according to the site's instructions.. it booted up, BUT the Safety-Net-Check was negative... Did i miss something?
you n
SanHelios said:
well, i just rooted it according to the site's instructions.. it booted up, BUT the Safety-Net-Check was negative... Did i miss something?
Click to expand...
Click to collapse
you need to hide Magisk Manager and also Magisk hide Google Play, Play services and Google Services Framework
s3axel said:
My pleasure
And yes, I rooted my device this way although I took the "fastboot flash boot_ab" approach instead of the separate flashing of a and b.
For updating the ROM I took the boot image before installing, patched it with Magisk, copied it back to the images installation folder and let the update script do its magic - thus I got instant-root for the update...
Click to expand...
Click to collapse
I flashed it separately on the second attempt for 12.5.3. The first time I tried flashing the patched boot.img I was greeted with an error.
Hi! I have the latest xiaomi eu weekly installed (21.6.23) as well as unofficial twrp.
I would like to root the phone with magisk, but I don't understand a few things.
Magisk manager require patching the boot.img file from the zip firmware.
I can not just simply install magisk zip file in twrp to root mi11 ultra?
If not, I understand that I have to patch the boot.img- but do I have to do it every time I want to install update of the latest xiaomi.eu firmware?
The second question is about data.
Am I loosing the data by rooting the device by this method?
EDIT:
Ok, I managed. So those are the steps that I did:
I unpacked the boot.img from the xiaomi.eu firmware in my phone. Then I patched the file, and copy this file to the adb installation folder of my pc.
Later it's easy- usb debugging needs to be active in developer options, then connect your phone by the cable to your pc, accept usb debugging in your phone, start CMD in the adb folder in your pc and write the command:
fastboot flash boot_ab nameofthefilewhatmagiskgenerated.img
then
fastboot reboot
And done, root works. Data are untouched.
I did it easier, boot into twrp and flash magisk.zip done
Also I'm on official EEA firmware, with original stock recovery, so doesn't matter what rom you use. On xiaomi EU you don't even need adb because you already have twrp injected
Is there anything to worry about when you update the phone while having root access?
Is the following order right?
1) update Rom over twrp and delete dalvik&cache
2)flash magisk.zip again
3)boot into system
Right ?
I have the latest EU Rom 12.5.7...
Just take this bat with decrypted Star twrp 3.5.1
unzip and klick Install-Star.bat
fastboot boot star.img are the commands in there
xNAPx said:
I did it easier, boot into twrp and flash magisk.zip done
Click to expand...
Click to collapse
how did you get twrp on your mi 11??? I cannot find a working method. I have Global ver
ottjoshua said:
how did you get twrp on your mi 11??? I cannot find a working method. I have Global ver
Click to expand...
Click to collapse
Hi guys, i just flashed (with a light wipe) the last rom for my Xiaomi Mi 11 Ultra (obtained on the update section of parameters) and i first lost all my config.
So, i decided to restore the backup i made just before flashing and here is the drama, it boot directly into TWRP and i can't seem to find my storage anymore (tried file manager)
TWRP also tells me that no OS is installed, please help, i'm desperate
I think the first step is to recover access to internal sdcard, and maybe then i can restore a backup
Thank you !
simply, Fastboot and install official rom using mi flash tool.
thats one of the penalties you'd pay of installing eu rom.
hassanaliyeh said:
simply, Fastboot and install official rom using mi flash tool.
thats one of the penalties you'd pay of installing eu rom.
Click to expand...
Click to collapse
Ok, will try this tomorrow, thank you !
Is it this one : https://www.xiaomiflash.com/ ?
Xiaomi Flash Tool - Official Mi Flash Tool
Download the latest and Official Xiaomi Flash Tool from the Official Xiaomi Flash Tool Website.
xiaomiflashtool.com
This is the official one. Use the newest version
hassanaliyeh said:
Xiaomi Flash Tool - Official Mi Flash Tool
Download the latest and Official Xiaomi Flash Tool from the Official Xiaomi Flash Tool Website.
xiaomiflashtool.com
This is the official one. Use the newest version
Click to expand...
Click to collapse
Thank you very much, sir !
Will try this and post the result, maybe with a little tuto if it's not already everywhere ^^
So, tried 5 times and not once a good result, the better i can obtain is 12.5.7.0 global working, flashed with xiaomitool. TWRP ok, and i will try Magisk next.
Every other tries solded by an sdcard/os/data loss T_T
That's a mystery. I ran on 12.5.17.0 all fine before this incident and i cannot get it work anymore :/
I obtained rom from https://androidfilehost.com/?w=files&flid=321331
TWRP from https://androidfilehost.com/?fid=14943124697586336381
Also tried this method again (this was my first method and it worked like a charm till this 12.5.20.0... )
[ROM][MIUI][star/mars] Xiaomi.eu ROM for Xiaomi MI 11 Pro / Ultra
How to install Xiaomi.eu ROM for Xiaomi MI 11 Pro / Ultra We will release fastboot ROM versions until TWRP for star/mars is released TWRP RELEASED Steps to install xiaomi.eu ROM for first time from China ROM (All your data and files on...
forum.xda-developers.com
The problem with global is it seems to be greatly outdated (patch from 2021.09, that's a huge security risk to be months backward nowadays, let aside bug correction, new functionnality, etc)
I can't seem to find a more recent global version (updater within settings tells me there's no more up to date version).
Do someone have an idea, please ? :/
What i'm doing :
1. put device on fastboot mode
2. launch xiaomitool and flash 12.5.7.0 global rom
3. reboot into fastboot
4. launch xiaomi unlock and unlock device
5. boot TWRP with fastboot boot twrp.img in cmd (command returned all ok)
6. into "soft" TWRP, One Key Inject TWRP
7. into "hard" TWRP > install and give it the .zip rom file
8. after the rom installed, all broken again :/
Hi,
there is no TWRP-ROM available for the Ultra - it's still in fastboot-ROM phase.
Flash via fastboot. Unlocking is just needed once until relocking with orig. ROM.
(Optionally) Copy boot.img from ROM-folder to phone.
Use Magisk to patch boot.img
Flash patched boot.img to boot_a and boot_b via fastboot.
Wait until TWRP-compatible-zip's for the Ultra to begin to appear.
cya
gammelobst said:
Hi,
there is no TWRP-ROM available for the Ultra - it's still in fastboot-ROM phase.
Flash via fastboot. Unlocking is just needed once until relocking with orig. ROM.
(Optionally) Copy boot.img from ROM-folder to phone.
Use Magisk to patch boot.img
Flash patched boot.img to boot_a and boot_b via fastboot.
Wait until TWRP-compatible-zip's for the Ultra to begin to appear.
cya
Click to expand...
Click to collapse
Thanks for that ! ^^
That sure seem a simple task
You're telling me that i can, from my 12.5.7.0 global, patch the boot.img (90mb) from the 12.5.20.0 eu with magisk, flash this with fastboot and that it will work ?
Seems too wonderfull to be true XD
EDIT:
My bad, you said "optionnally", not "alternatively"
So, i'm stuck here, i don't know and can't seem to find the fastboot cmd to install the xiaomi eu rom in .zip format
Do you know it please ?
In all the 11 Ultra A12 weekly EU ROMs, the format is fastboot only. Just extract the .zip file to a folder on your desktop, connect your phone in fastboot mode, power on and vol down and then click on the update bat file. If your coming from a different branch, click on the update and format bat file ( the bat files will be in the upper most extracted folder). It is a simple as that .
Sathelp said:
In all the 11 Ultra A12 weekly EU ROMs, the format is fastboot only. Just extract the .zip file to a folder on your desktop, connect your phone in fastboot mode, power on and vol down and then click on the update bat file. If your coming from a different branch, click on the update and format bat file ( the bat files will be in the upper most extracted folder). It is a simple as that .
Click to expand...
Click to collapse
Hi Sathelp !
An ultra big thank you !! The flash worked wonderfuly it seems
That's awesome how simple it is, in fact, and to say that i lost hours and hours without being able to approach this, i'm so noob :/
much kudos :x
I'm now on the way to root and finally, can reuse my mi11 ^^
why Pixel experience rom is not available for redmi note 10s yet?
i beg developers attention, plz make this rom for redmi note 10s
there is not an official TWRP, thats why.... but you can still install GSI roms
maur0p said:
there is not an official TWRP, thats why.... but you can still install GSI roms
Click to expand...
Click to collapse
I have some question
1. Does phone manufacture provide this twrp?
2. how can I install GSI ROMs?
3. Is there any possibility to release the twrp mode?
is there any change to release pixel experience for redmi note 10s
shiblu06 said:
I have some question
1. Does phone manufacture provide this twrp?
2. how can I install GSI ROMs?
3. Is there any possibility to release the twrp mode?
Click to expand...
Click to collapse
1. we already have twrp
2. fastbootd
3. what
Oh btw just to add, lineageos (built from source) booted, but don't expect it to be released soon, nor pixel experience to get released
J6idot said:
1. we already have twrp
2. fastbootd
3. what
Oh btw just to add, lineageos (built from source) booted, but don't expect it to be released soon, nor pixel experience to get released
Click to expand...
Click to collapse
but eventually note 10s will get pixel experience right , i mean without bugs
phoenixnithish2112 said:
but eventually note 10s will get pixel experience right , i mean without bugs
Click to expand...
Click to collapse
too late
does flashing a miui rom;for example miui14; using pe recovery lock the bootloader again?
is there way to flash to the new miui14 without locking back the bootloader?
thank you
kidbetin said:
does flashing a miui rom;for example miui14; using pe recovery lock the bootloader again?
is there way to flash to the new miui14 without locking back the bootloader?
thank you
Click to expand...
Click to collapse
No, you will get a nice bootloop if you try that
tutibreaker said:
No, you will get a nice bootloop if you try that
Click to expand...
Click to collapse
thank you
what rom can i flash with the pe recovery?
kidbetin said:
thank you
what rom can i flash with the pe recovery?
Click to expand...
Click to collapse
none if you want still have a phone to use
There is one rom now https://download.pixelexperience.org/rosemary/
Has anyone installed the PE rom yet? I tried yesterday, following the instructions, and just got a boot loop after flashing the PE recovery rom.
However, the instructions confused me a little...
Flash a recovery on your device by typing (replace <recovery_filename> with the actual filename!):
Click to expand...
Click to collapse
fastboot flash boot <recovery_filename>.img
Click to expand...
Click to collapse
(My bold)
Should that be 'fastboot flash recovery' ??
Also, I'm not coming from stock but from a custom ROM (riceDroid). Would that make a difference?
Thanks for any (kind) comments
portcere said:
Has anyone installed the PE rom yet? I tried yesterday, following the instructions, and just got a boot loop after flashing the PE recovery rom.
However, the instructions confused me a little...
(My bold)
Should that be 'fastboot flash recovery' ??
Also, I'm not coming from stock but from a custom ROM (riceDroid). Would that make a difference?
Thanks for any (kind) comments
Click to expand...
Click to collapse
Hey, I ran into the same problem today. If I find a solution, I'll let you know. I would be glad if you share too.
I tried again yesterday to install Pixel Experience, and again it just boot loops when booting into recovery mode. I've now reinstalled stock Miui and will try again.
portcere said:
Has anyone installed the PE rom yet? I tried yesterday, following the instructions, and just got a boot loop after flashing the PE recovery rom.
However, the instructions confused me a little...
(My bold)
Should that be 'fastboot flash recovery' ??
Also, I'm not coming from stock but from a custom ROM (riceDroid). Would that make a difference?
Thanks for any (kind) comments
Click to expand...
Click to collapse
There no recovery partition so it shouldn't. I'm on this ROM currently and have no problems with installation. The guide says that you need to be on latest global a11 miui (12.5.16.0.RKLMIXM). You didn't miss that?
xuser_0 said:
There no recovery partition so it shouldn't. I'm on this ROM currently and have no problems with installation. The guide says that you need to be on latest global a11 miui (12.5.16.0.RKLMIXM). You didn't miss that?
Click to expand...
Click to collapse
I've no idea what version of the bootloader I'm on as getprop ro.bootloader returns 'unknown'
But, as I'm on "latest" v13 Miui, I suspect the bootloader is the wrong one. Do I have to downdate to 12.5 before installing PE?
Edit: I've downdated the device to 12.5 RKLMIXM and have flased the PE recovery image, all okay. It's now installing the PE zip, so fingers crossed that's it.
Edit edit: I have PE on my device! Thank you at @xuser_0 for highlighting were I'd gone wrong.
The key @JohanGriman appears to be to ensure your device is not on the latest Miui but the latest 12.5 version.
Is there any instructions on how to install Magisk on this? I've tried to usual ways (via apk and flashing .zip thru adb sideload) but it fails to repack the boot image. Will a manual patch of the boot image and reflash work?
Edit: I've been able to directly patch the PE recovery image (as used in the installation process) using the Magisk apk on my device. Can I now flash this patched image to the device?
I don't want to try it as other instructions I've found talk about a vbmeta image that needs to be flashed too, and I don't know if that's necesary.... and I don't want to trash my device again!
Just flash it but it will break safetynet. To fix safetynet enable Zygisk, add google play services to deny list and install shamiko.
xuser_0 said:
Just flash it but it will break safetynet. To fix safetynet enable Zygisk, add google play services to deny list and install shamiko.
Click to expand...
Click to collapse
Thanks, that worked perfectly
I flashed MIUI 14 from TWRP and it's working fine. The problem is that none of the Magisk modules are loading after a reboot.
I tried both Magisk 25.2 and Magisk Canary (v831a398b 25206). Still unable to load the modules. Anyone got it working?
HI
is the flashed MIUI 14 the chinese version ?
phoenixuwe said:
HI
is the flashed MIUI 14 the chinese version ?
Click to expand...
Click to collapse
There is not and never will be a CN rom for this device.
Did you download the recovery rom and flash that? (That's what I did)
After I flashed that recovery rom my magisk didn't work anymore as expected since the boot partition gets overwritten.
So what you do is that you download the "Payload Dumper" python program, I used this one:
GitHub - vm03/payload_dumper: Android OTA payload dumper
Android OTA payload dumper. Contribute to vm03/payload_dumper development by creating an account on GitHub.
github.com
With python installed you open a terminal and navigate to the downloaded payload dumper you type in this command:
Code:
python payload_dumper.py payload.bin
After a while it errors out (atleast it did for me) but there should be an output folder with a nicely extracted boot.img file!
Copy that file to your phone and use magisk to patch it, then transfer it back to your computer and flash it with fastboot with the usual:
Code:
fastboot flash boot boot.img
After that my magisk worked perfectly again
ExtremelyMAD said:
Did you download the recovery rom and flash that? (That's what I did)
After I flashed that recovery rom my magisk didn't work anymore as expected since the boot partition gets overwritten.
So what you do is that you download the "Payload Dumper" python program, I used this one:
GitHub - vm03/payload_dumper: Android OTA payload dumper
Android OTA payload dumper. Contribute to vm03/payload_dumper development by creating an account on GitHub.
github.com
With python installed you open a terminal and navigate to the downloaded payload dumper you type in this command:
Code:
python payload_dumper.py payload.bin
After a while it errors out (atleast it did for me) but there should be an output folder with a nicely extracted boot.img file!
Copy that file to your phone and use magisk to patch it, then transfer it back to your computer and flash it with fastboot with the usual:
Code:
fastboot flash boot boot.img
After that my magisk worked perfectly again
Click to expand...
Click to collapse
You don't need to do all that. Just flash Magisk_25.2.zip in TWRP and you get root. As simple as that!
My problem was that the Pixelify module was causing bootloop and once I removed that module, all my other magisk modules worked fine.
Hmm that's weird, maybe my zipfile was corrupt or anything because just reflashing it through TWRP didn't do it for me. But yeah if that works then it's significantly simpler
Do you have a link to the MIUI 14 Rom?
Spillunke said:
Do you have a link to the MIUI 14 Rom?
Click to expand...
Click to collapse
Sure thing, here you go:
Xiaomi Software Update Download (Recovery ROM) - Mi Firmware
Download Xiaomi Software Update and Update your Xiaomi phones with Stable Recovery ROM using official Xiaomi Flash Tool or OTA Method.
mifirmware.com
or a direct link:
https://bigota.d.miui.com/V14.0.3.0.TKDEUXM/miui_VILIEEAGlobal_V14.0.3.0.TKDEUXM_ba28c79ffe_13.0.zip
ExtremelyMAD said:
Hmm that's weird, maybe my zipfile was corrupt or anything because just reflashing it through TWRP didn't do it for me. But yeah if that works then it's significantly simpler
Click to expand...
Click to collapse
Of course, flashing Magisk zip in TWRP works as it's a time tested strategy and have been doing this forever.
ExtremelyMAD said:
Sure thing, here you go:
Xiaomi Software Update Download (Recovery ROM) - Mi Firmware
Download Xiaomi Software Update and Update your Xiaomi phones with Stable Recovery ROM using official Xiaomi Flash Tool or OTA Method.
mifirmware.com
or a direct link:
https://bigota.d.miui.com/V14.0.3.0.TKDEUXM/miui_VILIEEAGlobal_V14.0.3.0.TKDEUXM_ba28c79ffe_13.0.zip
Click to expand...
Click to collapse
The roms on this site are all marked STABLE while some are STABLE BETA.
RainGater said:
Of course, flashing Magisk zip in TWRP works as it's a time tested strategy and have been doing this forever.
Click to expand...
Click to collapse
Exact, provided you use the right TWRP.
NOSS8 said:
Exact, provided you use the right TWRP.
Click to expand...
Click to collapse
No officially supported twrp version for miui 14 yet, what is the right twrp for now?
mogging said:
No officially supported twrp version for miui 14 yet, what is the right twrp for now?
Click to expand...
Click to collapse
You can use the A12 to flash the A13, since the system is in A12. No need for TWRP to root or install mods.
Hello
Is this module safe to install?
How to get iOS like animations and recent menu in MIUI - xiaomiui
Xiaomi's MIUI is already pretty similar compared with iOS. But the thing is the company has been removing animations from some of its budget smartphones like
xiaomiui.net