Related
Ever since google rolled out the marshmallow update I have been plagued with battery issues to an extent where it was dropping to half from a full charge within a day even on standby . Having looked at many fixes on this forum which including rooting and replacing the kernel or simply turning core features like wifi off.For some users it may be tedious and it may risk bricking their device . So I decided to go back to stock 5.1.1 until google fixes the battery issues.
Before Proceeding Backup Your Data.
Follow the steps below to roll back to stock 5.1.1 along with stock recovery.
1) Download the Android One Toolkit http://forum.xda-developers.com/cro...oolbox-android-one-toolkit-one-click-t3030165.
2) Download 5.1 OTA update from here : http://forum.xda-developers.com/cro...l/ota-micromax-official-ota-captured-t3058879
3) Download 5.1.1 OTA update from here: http://forum.xda-developers.com/cro...al/ota-canvas-a1-5-1-1-captured-link-t3121543
4) Place both the OTA zips in root of SD CARD.Note the names of both versions.
5) Open Android One Toolkit.Enable USB Debugging . Unlock the Bootloader.
6) Install CWM Recovery from the Toolkit.
7) Reboot to Recovery.
8) Make a full backup of your existing ROM in case something goes wrong.
9) Erase Data , Cache & Dalvik Cache.
10) Select install zip from ext-sd card select the 5.1 OTA zip.
11) After completion reboot your phone. Update will also replace CWM with stock recovery ( No Worries)
12) Keep Wifi Off & Data connection off to prevent marshmallow being downloaded again during Setup . Setup your device Offline.
13) Reboot to stock recovery using key combo Power + Volume Up.If you get "No command" in stock recovery continue pressing Power+Volume Up until menu appears.
14) Select Update from SD Card . Select 5.1.1 OTA zip.
15) Reboot phone and you will now be on 5.1.1. Along with Stock Recovery.
16)Once Data or Wifi is enabled you may get update prompts of Marshmallow in notification. Disable update notification by long pressing on notification and goto settings from there you can disable it.
17) You may Relock Bootloader if You Wish from toolkit
Disclaimer:
I Am Not Responsible For Any Damage Caused To your Phone.
Credits to:
@anil293 for his toolkit
@varun.chitre15 For His Recoveries
@ghpranav & @GokulNC for OTA links.
Draining continues
Can't go to CWM even I unlocked bootloader I flash ed CWM but still on NO COMMAND
ranj9660 said:
Can't go to CWM even I unlocked bootloader I flash ed CWM but still on NO COMMAND
Click to expand...
Click to collapse
FIrst check in android toolkit in list devices if your device is mentioned.
After flashing CWM boot straight to recovery. Booting to OS may cause the recovery to be overwritten by STOCK recovery.
Yeah my device
My device mentioned too . I clicked list devices and I got device id then only I unlocked bootloader and installed custom recovery also but I can't enter to customer recovery ?
ranj9660 said:
My device mentioned too . I clicked list devices and I got device id then only I unlocked bootloader and installed custom recovery also but I can't enter to customer recovery
Click to expand...
Click to collapse
After installing CWM from toolkit don't restart to OS. Press Power+Volume Up until recovery select option appears.
But now
(First i have to thank you to giving me the instruction now its worked) Doesn't show zip files. What to do? I wiped dalvik cache, data and cache partition but doesn't show zip file ? got another problem
Can I use Twrp?
What's wrong using TWRP instead of CWM? I do not have windows. I have Linux(Ubuntu). From linux I can flash anything. But the problem is I don't have the latest recovery image of CWM for Android one devices. (The CWM project has been abandoned anyway).
My only concern is to get back the stock recovery after flashing 5.1.
The process you told to revert back to Lollipop after Marshmallow update, have u done that, are u succeeded.
Please tell me, because after Marshmallow update i got a severe battery drain and over heat in My Spice Dream Uno MI-498.
When my phone is in ideal it is okay but when i started using it then the issue started.
After revert back to Lollipop according to your process is there any IMEI problem.
Is it possible after flashing the ROM in Custom Recovery can it revert back to Stock Recovery.
androidone14 said:
The process you told to revert back to Lollipop after Marshmallow update, have u done that, are u succeeded.
Please tell me, because after Marshmallow update i got a severe battery drain and over heat in My Spice Dream Uno MI-498.
When my phone is in ideal it is okay but when i started using it then the issue started.
After revert back to Lollipop according to your process is there any IMEI problem.
Is it possible after flashing the ROM in Custom Recovery can it revert back to Stock Recovery.
Click to expand...
Click to collapse
Just flash away the STOCK ROM and you'll get everything STOCK
---------- Post added 5th November 2015 at 00:06 ---------- Previous post was 4th November 2015 at 23:57 ----------
ranj9660 said:
(First i have to thank you to giving me the instruction now its worked) Doesn't show zip files. What to do? I wiped dalvik cache, data and cache partition but doesn't show zip file �� got another problem
Click to expand...
Click to collapse
Please give more details or send a pic of what is going wrong for you. You have to put the zip file in your external card and flash from install from external SD card if that's what you are asking for.
wickedspice said:
Ever since google rolled out the marshmallow update I have been plagued with battery issues to an extent where it was dropping to half from a full charge within a day even on standby . Having looked at many fixes on this forum which including rooting and replacing the kernel or simply turning core features like wifi off.For some users it may be tedious and it may risk bricking their device . So I decided to go back to stock 5.1.1 until google fixes the battery issues.
Before Proceeding Backup Your Data.
Follow the steps below to roll back to stock 5.1.1 along with stock recovery.
1) Download the Android One Toolkit http://forum.xda-developers.com/cro...oolbox-android-one-toolkit-one-click-t3030165.
2) Download 5.1 OTA update from here : http://forum.xda-developers.com/cro...l/ota-micromax-official-ota-captured-t3058879
3) Download 5.1.1 OTA update from here: http://forum.xda-developers.com/cro...al/ota-canvas-a1-5-1-1-captured-link-t3121543
4) Place both the OTA zips in root of SD CARD.Note the names of both versions.
5) Open Android One Toolkit.Enable USB Debugging . Unlock the Bootloader.
6) Install CWM Recovery from the Toolkit.
7) Reboot to Recovery.
8) Make a full backup of your existing ROM in case something goes wrong.
9) Erase Data , Cache & Dalvik Cache.
10) Select install zip from ext-sd card select the 5.1 OTA zip.
11) After completion reboot your phone. Update will also replace CWM with stock recovery ( No Worries)
12) Keep Wifi Off & Data connection off to prevent marshmallow being downloaded again during Setup . Setup your device Offline.
13) Reboot to stock recovery using key combo Power + Volume Up.If you get "No command" in stock recovery continue pressing Power+Volume Up until menu appears.
14) Select Update from SD Card . Select 5.1.1 OTA zip.
15) Reboot phone and you will now be on 5.1.1. Along with Stock Recovery.
16)Once Data or Wifi is enabled you may get update prompts of Marshmallow in notification. Disable update notification by long pressing on notification and goto settings from there you can disable it.
17) You may Relock Bootloader if You Wish from toolkit
Disclaimer:
I Am Not Responsible For Any Damage Caused To your Phone.
Credits to:
@anil293 for his toolkit
@varun.chitre15 For His Recoveries
@ghpranav & @GokulNC for OTA links.
Click to expand...
Click to collapse
Thanks!!!
But is there any way to roll back without rooting the phone.
i don't want to my phone now.
anupamdubey said:
Thanks!!!
But is there any way to roll back without rooting the phone.
i don't want to my phone now.
Click to expand...
Click to collapse
Downgrade is possible only through unlocking bootloader and then flashing custom recovery which shall help you flash the LP firmware.
Rooting has nothing to do with this.
wickedspice said:
After installing CWM from toolkit don't restart to OS. Press Power+Volume Up until recovery select option appears.
Click to expand...
Click to collapse
it gets rebooted automatically after flashing cwm recovery but still no command.
stan1996 said:
it gets rebooted automatically after flashing cwm recovery but still no command.
Click to expand...
Click to collapse
Yes , thats the tricky part as os tries to restore stock recovery on boot. Here's what you need to do. On your computer when the toolkit prompt says " completed /finished" prevent rebooting by quickly pressing power+volume up. Once you get the selection prompt select recovery by volume up and confirm selection by volume down.
You have to do this only once , After you successfully boot to cwm it will prevent os from re writing recovery
wickedspice said:
Yes , thats the tricky part as os tries to restore stock recovery on boot. Here's what you need to do. On your computer when the toolkit prompt says " completed /finished" prevent rebooting by quickly pressing power+volume up. Once you get the selection prompt select recovery by volume up and confirm selection by volume down.
You have to do this only once , After you successfully boot to cwm it will prevent os from re writing recovery
Click to expand...
Click to collapse
thank you so much:angel::angel::angel:
I am getting stuck on unlock bootloader, it freezes and does nothing ? any ideas guys ? I really need to get away from marshmallow, hot phone, no 4g etc etc
Hey guys so I'm panicking right now, so I just unlocked the bootloader, flashed TWRP and rooted my phone but now the phone won't boot it's just stuck at the boot icon with the two circles chasing each other, am I screwed and is my phone useless now ?
Don't worry, this is a common problem that occurs when you use an older version of SuperSU.
Flash SuperSU v2.79 to root. You won't even have to reflash the OS. Your phone should reboot once during the booting process.
Alternatively, you can reflash the stock OS and root with Magisk v11.1, which will also root your phone.
Anova's Origin said:
Don't worry, this is a common problem that occurs when you use an older version of SuperSU.
Flash SuperSU v2.79 to root. You won't even have to reflash the OS. You phone should reboot once during the booting process.
Alternatively, you can reflash the stock OS and root with Magisk v11.1, which will also root your phone.
Click to expand...
Click to collapse
Okay so can you tell me how to remove 2.78 before I flash 2.79 ? thanks
You don't need to remove it. Flashing the newer one should replace the older one. I had the same problem when I first rooted following a slightly outdated guide. Flashing the newest version fixed it without a problem.
Anova's Origin said:
You don't need to remove it. Flashing the newer one should replace the older one. I had the same problem when I first rooted following a slightly outdated guide. Flashing the newest version fixed it without a problem.
Click to expand...
Click to collapse
My phone isn't showing up on my pc as a removable storage and when I type adb devices my phone isn't showing up either
If you have a usb-C OTG adapter, the easiest way is to copy it onto a flash drive and flash from the drive in TWRP.
TWRP should also have a way of mounting your phone to your PC, though I've personally never managed to get it to work.
Also, I believe adb works while you're in recovery mode. You can use adb to push the superSU zip to your phone's internal storage. If you aren't sure how to use adb, the toolkit consolidates all of the useful commands together.
Anova's Origin said:
If you have a usb-C OTG adapter, the easiest way is to copy it onto a flash drive and flash from the drive in TWRP.
TWRP should also have a way of mounting your phone to your PC, though I've personally never managed to get it to work.
Also, I believe adb works while you're in recovery mode. You can use adb to push the superSU zip to your phone's internal storage. If you aren't sure how to use adb, the toolkit consolidates all of the useful commands together.
Click to expand...
Click to collapse
I managed to flash 2.79 but I don't think it worked, still stuck booting, will leave it for a few minutes though to see if anything changes, any suggestions if that wasn't the issue ?
Dirty flash whatever version of OOS you're on, wipe delvic/cache, then immediately flash SuperSU without rebooting recovery.
Anova's Origin said:
Dirty flash whatever version of OOS you're on, wipe delvic/cache, then immediately flash SuperSU without rebooting recovery.
Click to expand...
Click to collapse
I have no idea how to do any of that, I'm a beginner could you explain to me please ?
stefinho said:
I have no idea how to do any of that, I'm a beginner could you explain to me please ?
Click to expand...
Click to collapse
1) Download the full ROM of OOS from OnePlus (ignore their instructions, they are assuming that you have the stock recovery installed).
2) Transfer the full zip onto your phone.
3) Boot into TWRP
4) Find where you've put the full ROM on your internal storage and flash it
5) Once TWRP finishes flashing it, tap the "wipe dalvik/cache" button, DO NOT REBOOT (if you reboot at this point, your TWRP will be replaced with stock recovery)
6) Press back on TWRP, find your SuperSU.zip and flash that
7) Reboot
This process replaces any non-user files that may have been damaged. You won't lose any data or the apps that you have downloaded. This will replace the recovery with stock if you do not root immediately before rebooting.
Anova's Origin said:
1) Download the full ROM of OOS from OnePlus.
2) Transfer the full zip onto your phone.
3) Boot into TWRP
4) Find where you've put the full ROM on your internal storage and flash it
5) Once TWRP finishes flashing it, tap the "wipe dalvik/cache" button, DO NOT REBOOT (if you reboot at this point, your TWRP will be replaced with stock recovery)
6) Press back on TWRP, find your SuperSU.zip and flash that
7) Reboot
Click to expand...
Click to collapse
Thanks, will try that now.
Anova's Origin said:
1) Download the full ROM of OOS from OnePlus (ignore their instructions, they are assuming that you have the stock recovery installed).
2) Transfer the full zip onto your phone.
3) Boot into TWRP
4) Find where you've put the full ROM on your internal storage and flash it
5) Once TWRP finishes flashing it, tap the "wipe dalvik/cache" button, DO NOT REBOOT (if you reboot at this point, your TWRP will be replaced with stock recovery)
6) Press back on TWRP, find your SuperSU.zip and flash that
7) Reboot
This process replaces any non-user files that may have been damaged. You won't lose any data or the apps that you have downloaded. This will replace the recovery with stock if you do not root immediately before rebooting.
Click to expand...
Click to collapse
DUDE, it worked thank you so much man really appreciate the help
I had Resurrection rom installed in my K3 note and needed to sell the phone. So performed a complete wipe of the internal storage and tried to install AICP rom later (TWRP), it shows flashed successfully, but whenever I am booting my phone, it always boots to recovery only. Downloaded the SP flash tool to go back to stock rom with stock firmware, but as soon as I plug my phone woth my laptop with the USB cable, (which is switched off at this moment) after clicking the download option in the SP Flash tool, it just again boots back to recovery and the stock firmware's download never happens because my phone has booted into recovery. So i guess no use of SP Flash tool too.
I am able to connect my phone to my laptop and can see my internal storage and i can transfer files too.
Any help,?
Current rom flashed via TWRP - AICP v4.2 and Gapps micro (arm 64, pico) (Still stuck in booloop to TWRP only )
I am having the same issue! I've selected to restore factory settings and bam, it boots only to TWRP, I've tried to flash it with new rr rom (09.2017) but it is without any improvement still TWRP.
I think I'll try to do things like I did when changing it from stock model.
My phone TWRP-looped many times. The solution is actually easy.
1. Reflash using SPFlashtool ONLY the stock recovery
2. boot into stock recovery
3. choose english > press reboot phone
4. phone will reboot into rom without problemos
5. reflash TWRP
cheers
or
1. Copy stock recovery.img into sdcard
2. In twrp, select Install and navigate to where you put stock recovery.img
3. Press install image. Then, Select recovery.img. Slide to install
4. boot into stock recovery
5. choose english > press reboot phone
6. phone will reboot into rom without problemos
7. reflash TWRP
DONE
what button combination to boot into fastboot
Hi
Whats the key communication to boot into fastboot to flash recovery image ?
Currently, having only stock recovery with no os installation.
Did you get the solution?
I gave reboot phone and the phone is stuck into an infinite restart.
Arjunism said:
My phone TWRP-looped many times. The solution is actually easy.
1. Reflash using SPFlashtool ONLY the stock recovery
2. boot into stock recovery
3. choose english > press reboot phone
4. phone will reboot into rom without problemos
5. reflash TWRP
cheers
or
1. Copy stock recovery.img into sdcard
2. In twrp, select Install and navigate to where you put stock recovery.img
3. Press install image. Then, Select recovery.img. Slide to install
4. boot into stock recovery
5. choose english > press reboot phone
6. phone will reboot into rom without problemos
7. reflash TWRP
DONE
Click to expand...
Click to collapse
Hi guys,
Im using Note 5 N920C at lastest stock Nougat firmware (N920CXXS4CRA2)
i've got a very headache when try to flash twrp (to flash custom rom) but my N920C still get stuck at Samsung logo
Prepare: unlock OEM, Odin 3.12, TWRP 3.2.1.0, SuperSU-v2.82
1. Try flash TWRP by Odin. reboot get stuck. Try to reboot to Recovery, wipe cache -> phone get reboot all the time
2. Back to Stock FW, try to flash TWRP. This time reboot to Recovery, allow system modifications -> flash N920_Nougat_Root_SuperSU_No_kernel_included script -> reboot and stuck
3. Back to Stock FW, try to flash TWRP. This time reboot to Recovery, allow system modifications -> format data -> reboot to recovery -> flash supersu -> reboot and stuck again
4. Back to Stock FW, TWRP allow system modifications > wipe data> reboot recovery > allow system modification> wipe data, system,cache, dalvik/art > flashed 'dm-verity and force encryption disabler' > flashed 'super-su' > flashed Custom ROM -> Stuck again
5. If i flash Lineage OS (or CM rom) via TWRP, it works without any issue
...
As many time i tried to flash something, myphone still get stuck, i dont know why because my previos Note 5 seem to be very easy to root (at Nougat also)
Could you please help me to findout what problem happen here and how can i flash a custom rom properly (i can back to stock whenever it stucks but i want to flash custom roms). Thank you so much
venomnguyen said:
Hi guys,
Im using Note 5 N920C at lastest stock Nougat firmware (N920CXXS4CRA2)
i've got a very headache when try to flash twrp (to flash custom rom) but my N920C still get stuck at Samsung logo
Prepare: unlock OEM, Odin 3.12, TWRP 3.2.1.0, SuperSU-v2.82
1. Try flash TWRP by Odin. reboot get stuck. Try to reboot to Recovery, wipe cache -> phone get reboot all the time
2. Back to Stock FW, try to flash TWRP. This time reboot to Recovery, allow system modifications -> flash N920_Nougat_Root_SuperSU_No_kernel_included script -> reboot and stuck
3. Back to Stock FW, try to flash TWRP. This time reboot to Recovery, allow system modifications -> format data -> reboot to recovery -> flash supersu -> reboot and stuck again
4. Back to Stock FW, TWRP allow system modifications > wipe data> reboot recovery > allow system modification> wipe data, system,cache, dalvik/art > flashed 'dm-verity and force encryption disabler' > flashed 'super-su' > flashed Custom ROM -> Stuck again
5. If i flash Lineage OS (or CM rom) via TWRP, it works without any issue
...
As many time i tried to flash something, myphone still get stuck, i dont know why because my previos Note 5 seem to be very easy to root (at Nougat also)
Could you please help me to findout what problem happen here and how can i flash a custom rom properly (i can back to stock whenever it stucks but i want to flash custom roms). Thank you so much
Click to expand...
Click to collapse
1: Flash the rom after you wipe system, data & cache.
2: Let it boot for the first initial setup & setup your phone with language & country etc.
3: Restart your phone to twrp recovery then flash supersu & dm verity.
Let me know.
PRADEEPHONDA said:
1: Flash the rom after you wipe system, data & cache.
2: Let it boot for the first initial setup & setup your phone with language & country etc.
3: Restart your phone to twrp recovery then flash supersu & dm verity.
Let me know.
Click to expand...
Click to collapse
Did you mean flash stock or custom ROM ? as i mentioned above, when flash custom my phone will stuck at logo (i can boot only with LineageOS, dont know why
I will try these steps:
1. Back to Stock
2. Flash TWRP, immediately go to TWRP recovery
3. Format Data, reboot to TWRP recovery
4. Flash SR5-SuperSU-v2.82-SR5-20171001224502.zip and no-verity-opt-encrypt-6.0.zip
5. Wipe Davik Cache
6. Reboot.
Am i right ?
I will try and post result to you for more help. Btw, thank for your attention.
venomnguyen said:
Did you mean flash stock or custom ROM ? as i mentioned above, when flash custom my phone will stuck at logo (i can boot only with LineageOS, dont know why
I will try these steps:
1. Back to Stock
2. Flash TWRP, immediately go to TWRP recovery
3. Format Data, reboot to TWRP recovery
4. Flash SR5-SuperSU-v2.82-SR5-20171001224502.zip and no-verity-opt-encrypt-6.0.zip
5. Wipe Davik Cache
6. Reboot.
Am i right ?
I will try and post result to you for more help. Btw, thank for your attention.
Click to expand...
Click to collapse
No.... After flashing stock through Odin, let the device boot for initial setup dude. Don't flash twrp...!
After the phone setup is done you can go back to download mode & flash twrp.
There is no need to format data for rooting your device dude.
Just flash supersu & no verity... You will be fine.
Stock rom or custom ROM follow my words.
PRADEEPHONDA said:
No.... After flashing stock through Odin, let the device boot for initial setup dude. Don't flash twrp...!
After the phone setup is done you can go back to download mode & flash twrp.
There is no need to format data for rooting your device dude.
Just flash supersu & no verity... You will be fine.
Stock rom or custom ROM follow my words.
Click to expand...
Click to collapse
It does not work, both my way and or way, it's still stuck
venomnguyen said:
It does not work, both my way and or way, it's still stuck
Click to expand...
Click to collapse
In your first post you have stated that you are not able to flash custom rom but now you are telling me that your phone is stuck even when Flashed with stock rom....!
I'm confused about what's happening here because the methods you have stated will not work in any case scenario as base ROM is required to flash - root to system or any mods so without rom you can't root any phone by flashing supersu first before even flashing rom that's the logical here.
There is no my method or your method but there is a universal step by step method which you clearly need to understand.
But anyways I can't help you anymore as I have no video to assess your process.
As a last resolution I will suggest one more method, if you can boot your phone to stock recovery then you can reset your device by factory reset which will again wipe everything within the phone so proceed with caution(just mentioning) so once you wipe your phone through stock recovery. Let me know. It has to boot in my opinion.
Before you do this try to reflash official & latest firmware which will be the January security updates through Odin with default settings.
After you get Odin pass message, it will automatically reboot so wait for 30 minutes max. If nothing happens press & hold volume down & power key to reboot device & as soon as the screen goes off to reboot, you will have to enter to recovery mode by holding on to volume up, power & home key as you already will know (just mentioned) then wipe to factory reset. Reboot.
Let me know if this works.
If not I'm located in Bangalore so if you are from Bangalore then I might help you. Again no fees or charges (just mentioned)
Or
Try this rom:
https://forum.xda-developers.com/note5/development/rom-t3607729
Or take it Samsung official Store to find out if your device has any issues with power chips or so..!
PRADEEPHONDA said:
In your first post you have stated that you are not able to flash custom rom but now you are telling me that your phone is stuck even when Flashed with stock rom....!
I'm confused about what's happening here because the methods you have stated will not work in any case scenario as base ROM is required to flash - root to system or any mods so without rom you can't root any phone by flashing supersu first before even flashing rom that's the logical here.
There is no my method or your method but there is a universal step by step method which you clearly need to understand.
But anyways I can't help you anymore as I have no video to assess your process.
As a last resolution I will suggest one more method, if you can boot your phone to stock recovery then you can reset your device by factory reset which will again wipe everything within the phone so proceed with caution(just mentioning) so once you wipe your phone through stock recovery. Let me know. It has to boot in my opinion.
Before you do this try to reflash official & latest firmware which will be the January security updates through Odin with default settings.
After you get Odin pass message, it will automatically reboot so wait for 30 minutes max. If nothing happens press & hold volume down & power key to reboot device & as soon as the screen goes off to reboot, you will have to enter to recovery mode by holding on to volume up, power & home key as you already will know (just mentioned) then wipe to factory reset. Reboot.
Let me know if this works.
If not I'm located in Bangalore so if you are from Bangalore then I might help you. Again no fees or charges (just mentioned)
Or
Try this rom:
https://forum.xda-developers.com/note5/development/rom-t3607729
Or take it Samsung official Store to find out if your device has any issues with power chips or so..!
Click to expand...
Click to collapse
Hi Bro,
Maybe you misunderstand what i mean. Ofcouse i can back to stock firmware without any problem. I said it still suck is when i try to flash TWRP, even root or Custom ROMs.
Thank you.
venomnguyen said:
Hi Bro,
Maybe you misunderstand what i mean. Ofcouse i can back to stock firmware without any problem. I said it still suck is when i try to flash TWRP, even root or Custom ROMs.
Thank you.
Click to expand...
Click to collapse
OK you have to state what version twrp you are flashing?
Now if it's just recovery then I would say to try TWRP 3.1.1.0 which is most stable version in my view.
Note: Re-download all Twrp tar, Supersu & no verity zip.
First flash twrp & then let the device boot to home screen.
Second reboot to recovery by hard keys.
If you see stock recovery go back to download mode flash twrp & go back to recovery without booting as you are doing but this time just swipe to allow modifications & reboot to recovery again.
Without flashing anything just reboot from recovery to system.
Thirdly if you device reboots to home screen then again get back to twrp recovery & now flash supersu & no verity zip & restart device. You should be able to solve this.
PRADEEPHONDA said:
OK you have to state what version twrp you are flashing?
Now if it's just recovery then I would say to try TWRP 3.1.1.0 which is most stable version in my view.
Note: Re-download all Twrp tar, Supersu & no verity zip.
First flash twrp & then let the device boot to home screen.
Second reboot to recovery by hard keys.
If you see stock recovery go back to download mode flash twrp & go back to recovery without booting as you are doing but this time just swipe to allow modifications & reboot to recovery again.
Without flashing anything just reboot from recovery to system.
Thirdly if you device reboots to home screen then again get back to twrp recovery & now flash supersu & no verity zip & restart device. You should be able to solve this.
Click to expand...
Click to collapse
Thank, i'm using TWRP 3.2.1.0 currently, i will try TWRP 3.1.1.0 as your guide. So, i will try as following step:
1. Flash TWRP 3.1.1.0 and let it boot to Home Screen
2. If ok then go to Recovery -> flash upersu & no verity zip & restart device
2.1 If still in stock then flash twrp again -> go to recovery -> allow modification -> reboot to recovery -> reboot to system
2.2 If cannot boot to Home Screen after First Step then flash twrp again -> go to recovery -> allow modification -> reboot to recovery -> reboot to system
Are those correct ?
venomnguyen said:
Thank, i'm using TWRP 3.2.1.0 currently, i will try TWRP 3.1.1.0 as your guide. So, i will try as following step:
1. Flash TWRP 3.1.1.0 and let it boot to Home Screen
2. If ok then go to Recovery -> flash upersu & no verity zip & restart device
2.1 If still in stock then flash twrp again -> go to recovery -> allow modification -> reboot to recovery -> reboot to system
2.2 If cannot boot to Home Screen after First Step then flash twrp again -> go to recovery -> allow modification -> reboot to recovery -> reboot to system
Are those correct ?
Click to expand...
Click to collapse
Yes
PRADEEPHONDA said:
Yes
Click to expand...
Click to collapse
Hi bro,
after try few time, the result is:
1. After flash TWRP and boot to home Scree, it's stuck at Samsung Logo, so i took the 2.2 step
2.2. Re-flash TWRP -> recovery -> allow modification -> reboot recovery -> reboot system. Then my device loop in bootloop
After all i have to back to stock and consider to give up rooting my phone . But one thing that always in my mind, why my Note 5 can boot normally with lineageos after flash with TWRP. Does this os different from other custom ROM that can boot in my Note 5.
Anw, thank you so much for your assist.
venomnguyen said:
Hi bro,
after try few time, the result is:
1. After flash TWRP and boot to home Scree, it's stuck at Samsung Logo, so i took the 2.2 step
2.2. Re-flash TWRP -> recovery -> allow modification -> reboot recovery -> reboot system. Then my device loop in bootloop
After all i have to back to stock and consider to give up rooting my phone . But one thing that always in my mind, why my Note 5 can boot normally with lineageos after flash with TWRP. Does this os different from other custom ROM that can boot in my Note 5.
Anw, thank you so much for your assist.
Click to expand...
Click to collapse
No problem, you are welcome.
Try magisk root. Follow their rooting procedures in the xda forum.
magisk root for note5 nougat try this sir.
http://galaxynote5root.com/galaxy-n...galaxy-note-5-on-android-7-0-nougat-w-magisk/
venomnguyen said:
Hi bro,
after try few time, the result is:
1. After flash TWRP and boot to home Scree, it's stuck at Samsung Logo, so i took the 2.2 step
2.2. Re-flash TWRP -> recovery -> allow modification -> reboot recovery -> reboot system. Then my device loop in bootloop
After all i have to back to stock and consider to give up rooting my phone . But one thing that always in my mind, why my Note 5 can boot normally with lineageos after flash with TWRP. Does this os different from other custom ROM that can boot in my Note 5.
Anw, thank you so much for your assist.
Click to expand...
Click to collapse
Hi there it's not that difficult i've faced the same issue with my n920c
Solution: Install the TWRP recovery just like normal but when the device is rebooting and black screen shows up Press and Hold [Power+home+vol down] until you see TWRP screen
Please Note: this is really important to press and hold while rebooting ...
After this you can normally reboot to recovery there would be no problem
Good luck !
hey bro,,im facing same problem i am a poor fellow and note5 was a gift for me, but i upgraded it to 7.0 from 5.1.1 which i was running from 2017....now the same problem always on samsung galaxy note5 logo ..i dont know what to do tried various roms , kernels it boots to homescreen but if i restart it gets stuck...otherwise lineage boots everytime, whats the problem ,,,xda heroes kindly help me and others facing this.
---------- Post added at 03:17 PM ---------- Previous post was at 03:16 PM ----------
plz rply devs
---------- Post added at 03:17 PM ---------- Previous post was at 03:17 PM ----------
venomnguyen - any solution bro? did u succeed
This is for All Carriers.
You Do Not Need To Be Rooted To Install This Rom
You Must Be On Stock CRF1 Oreo Firmware Before Starting
This Takes Some Patience To Install
What Is Safestrap
Safestrap is a Bootstrap / Recovery for locked bootloader phones. Safestrap is now based on TWRP Recovery (a touch based recovery) and you can perform .zip installs, backups and restores here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads
ODIN_ADB_G930_CRF1_ALL_CARRIERS_V3.zip
Google Drive Mirror
Odin Files
G930TUVU4CRF1_G930TTMB4CRF1_TMB.zip
Google Drive Mirror
Feature:
SafeStrap Recovery PreLoaded
Official Oreo
Safetynet Passes
Samsung Pay,Pass,Secure Folder Working
Samsung Cloud Enabled
Places Tab Enabled
Spam Caller Id Enabled
Call Recording Enabled
Native Status Bar Speed Meter Enabled
Custom Boot Animation
Helpful Key Combos
Recovery Mode
Home+ Volume Up + Power @ Same time
Download Mode
Home + Volume Down + Power @ Same time
Safe Mode
Phone Powered Off
Press and hold the Power key past the model name screen.
When “SAMSUNG” appears on the screen, release the Power key.
Immediately after releasing the Power key, press and hold the Volume down key.
Force Reboot
Press and hold the Power + Volume Down buttons for approximately 10
Pre Install/Install Instructions
1. Donwload and unzip ODIN_ADB_G930_CRF1_ALL_CARRIERS.zip. If not on CRF1 Oreo firmware download and unzip G930TUVU4CRF1_G930TTMB4CRF1_TMB.zip
2. Use the odin thats located in the ODIN_ADB_G935_CR**_ALL_CARRIERS folder in the Odin_Firmware folder
3. In Odin select the AP, BL, CP and CSC files from the G930TUVU4CRF1_G930TTMB4CRF1_TMB and put them in the corresponding Odin slots In the Pit file tab in odin select the HERO2QLTE_USA_VZW.pit no matter what carrier you are.
4. Select start in odin. You will loose your data and files on internal storage
5. You do not need to go through setup of stock firmware as you are wiping again. So as soon as odin is done flashing and phone reboots and finishes recovery install
and reboots you can immediately reboot too download mode and continue too install instructions 1
Install Instructions
1. Make sure phone is plugged into computer
2. Make sure phone is rebooted to download mode
3. In BL slot in odin flash BL_ENG_BOOTLOADERS_G93*.tar
4. As soon as phone powers off hold buttons to reboot to recovery
5. Once in recovery run xxx_FlashSystem.cmd
6. Phone will reboot to download mode
7. In BL slot in odin flash BL_G935_CRF1_DELETE_CACHE.tar
8. Phone will automatically reboot to recovery
9. Let recovery bootloop at least once
10. Hold buttons to reboot to download
11. In BL slot in odin flash BL_ENG_BOOTLOADERS_G93*.tar
13. Phone will automatically reboot to recovery
14. Once in recovery you will see a bunch of red lines saying failed to mount cache. Scroll down and select wipe cache then reboot too bootloader
15. Phone will reboot to download mode
16. In BL slot in odin flash BL_G93*_CR**.tar
17. Phone will reboot but it will not automatically reboot to recovery you must do this manually. As soon as phone powers off hold buttons to reboot to recovery
18. When in recovery you will get the no command error then after a few you will get recovery options at this point wipe data and reboot to setup phone
19. If phone does not boot up after 10 minutes reboot to recovery and wipe cache. If this don't work then reboot back to recovery and wipe data
To Enter And Exit Safestrap
1. Make sure phone is plugged into computer
2. Make sure phone is rebooted to download mode
3. In BL slot in odin flash BL_ODIN_ENTER_SAFESTRAP_G93*.tar
4. Let Phone reboot and enter safestrap
5. Too leave safestrap click reboot phone and hold buttons to reboot to download mode
7. In BL slot in odin flash BL_G935_CRF1_DELETE_CACHE.tar
8. Phone will automatically reboot to recovery
9. Let recovery bootloop at least once
10. Hold buttons to reboot to download
11. In BL slot in odin flash BL_ENG_BOOTLOADERS_G93*.tar
13. Phone will automatically reboot to recovery
14. Once in recovery you will see a bunch of red lines saying failed to mount cache. Scroll down and select wipe cache then reboot too bootloader
15. Phone will reboot to download mode
16. In BL slot in odin flash BL_G93*_CR**.tar
17. Phone will reboot but it will not automatically reboot to recovery you must do this manually. As soon as phone powers off hold buttons to reboot to recovery
18. When in recovery you will get the no command error then after a few you will get recovery options at this point wipe cache and reboot
19. After leaving recovery. If you have white boot animation all went well.
20. If phone does not boot up after 10 minutes reboot to recovery and wipe cache. If this don't work then reboot back to recovery and wipe data
Old Downloads
ODIN_ADB_G930_TMO.zip
Odin Files
G930VVRU4CRE5_8.0_4File_USA (Verizon).7z
Google Drive Mirror
Old Pre Install/Install Instructions
1. If not on CRE5 Oreo firmware download and unzip G93*VVRU4CRE5_8.0_4File_USA (Verizon).7z Unzip ODIN_ADB_G93*_CR**.zip
2. Use the odin thats located in the ODIN_ADB_G93*_CR** folder in the Odin_Firmware folder
3. In Odin select the AP, BL, CP and CSC files from the G93*VVRU4CRE5_8.0_4File_USA (Verizon) and put them in the corresponding Odin slots
4. You will loose your data and files on internal storage
5. You do not need to go through setup of stock firmware as you are wiping again. So as soon as odin is done flashing and phone reboots and finishes recovery install
and reboots you can immediately reboot too download mode and continue too install instructions 1
Old Install Instructions
1. Make sure phone is plugged into computer
2. Make sure phone is rebooted to download mode
3. In BL slot in odin flash BL_ENG_BOOTLOADERS_G93*.tar
4. As soon as phone powers off hold buttons to reboot to recovery
5. Once in recovery run xxx_FlashSystem.cmd
6. Phone will reboot to download mode
7. In BL slot in odin flash BL_G93*_CR**.tar
8. As soon as phone powers off hold buttons to reboot to recovery
9. Let recovery bootloop at least once
10. Hold buttons to reboot to download
11. In BL slot in odin flash BL_ENG_BOOTLOADERS_G93*.tar
13. Phone will reboot as soon as phone powers off hold buttons to reboot to recovery
14. Once in recovery if this is your first time installing you must run xx_AddCache WipeData.cmd. If your reinstalling and want to keep data run xx_AddCacheWipeCache.cmd
15. Phone will reboot to download mode
16. In BL slot in odin flash BL_G93*_CR**.tar
17. Phone will reboot as soon as phone powers off hold buttons to reboot to recovery
18. When recovery is done phone will reboot. If you have white boot animation all went well.
19. If phone does not boot up after 10 minutes reboot to recovery and wipe cache. If this don't work then reboot back to recovery and wipe data
To Enter And Exit Safestrap
1. Make sure phone is plugged into computer
2. Make sure phone is rebooted to download mode
3. In BL slot in odin flash BL_ODIN_ENTER_SAFESTRAP_G93*.tar
4. Let Phone reboot and enter safestrap
5. Too leave safestrap click reboot phone and hold buttons to reboot to recovery mode
6. Once in recovery run x_DeleteCache.cmd
7. Phone will reboot to download mode
8. In BL slot in odin flash BL_G93*_CR**.tar
9. Phone will reboot as soon as phone powers off hold buttons to reboot to recovery
10. Let recovery bootloop at least once
11. Hold buttons to reboot to download
12. In BL slot in odin flash BL_ENG_BOOTLOADERS_G93*.tar
13. Phone will reboot as soon as phone powers off hold buttons to reboot to recovery
15. Once in recovery run xx_AddCacheWipeCache.cmd
16. Phone will reboot to download mode
17. In BL slot in odin flash BL_G93*_CR**.tar
18. Phone will reboot as soon as phone powers off hold buttons to reboot to recovery
19. When recovery is done phone will reboot. If you have white boot animation all went well.
20. If phone does not boot up after 10 minutes reboot to recovery and wipe cache. If this don't work then reboot back to recovery and wipe data
Bugs:
DO NOT USE ENCRYPTION
Safestrap is still beta so there are some bugs
All reboot options in safestrap only reboot the phone.
Safestrap rom slots do not work dont mess with
Credits:
- @Raymonf for modified odin
- @afaneh92 for safestrap Main Thread Here Consider a donation to him he worked along time on this Donation Link
- @me2151 for finding this method
- @tytydraco for some instructions
- @mweinbach for some instructions
- @Craz Basics for xposed on non rooted
- @partcyborg for finding the root method!
- @elliwigy for being great help and original S8 root
- @rayan-refoua for boot animation
- @FatalONEM8 - For posting Oreo OTA
- @stang5litre
- @jds3118
- @Krog18
- @klabit87 for S7 Safestrap
echoe rom and noname rom
stang5litre Test Group
Click to expand...
Click to collapse
SafeStrap Flashable Zips
Remove FRP Protection Safestrap Flashable Zip
SS_Remove_FRP_S7.zip
Directions For FRP
So if your stuck and dont know google account info Do the samfail process when all done flash file to enter safestrap once in safestrap mount and unmount system then flash SS_Remove_FRP zip then follow direction to leave safestrap. After your phone reboots from recovery the last time force phone back to recovery wait until options come up and wipe data and you can now enter new google account in setup or skip
Google Pixel Style With Samsung Apps Replaced With Google Apps
Google_Style_With_Build_prop_Tweaks_V4.zip (Slightly Debloated)
Data Wipe is recommended to get full effect
If you flash one of the google mods make sure to set default dialer in settings/apps to google dialer
If Gboard dont show update the app in playstore or apk mirror then in playstore uninstall the update then it will work
Extreme Aroma based debloater for S8/S7/S9 devices by OrelMadK
https://forum.xda-developers.com/galaxy-s8/themes/4-2-18-extreme-aroma-based-debloater-s8-t3744608
This aroma debloater probably one of the best I have seen by @orelta
The above zips cannot be undone If you want to go back to stock you would need to do the Install process over but you shouldnt need to wipe data this time
Xposed Framework Installer zip
xposed-v90-sdk26-arm64-beta3.zip Flash In safestrap
Xposed Installer APK
XposedInstaller_3.1.5.apk Install as normal apk then open app make sure framework is installed (the box will be yellow) then reboot open and box will be green showing its working
Recommended Xposed Modules
Xtended-Settings.3.1.7.apk
GravityBox-O.8.2.0.apk
Firefds-Kit-Oreo.0.1.0.0.apk
Xposed Uninstaller zip
xposed-uninstaller-20180117-arm64.zip
Dual Speaker Mod
Dual+Speaker_Oreo-8.0-Compatible.zip Flash In safestrap
Dual+Speaker_Return_TO_Stock.zip
Rom Control-Access To Some Hidden Settings
RomControl.apk
Host AdBlocking
Host_AddBlocking.zip
Remove_Host_AddBlocking.zip
Credits
- @rovo89 for xposed Main xposed thread
- @IDan1109 base of debloat script
- @EmperorEye for some build.prop tweaks script
If I were to flash this on my t mobile s7 right now (with the verizon firmware), what t mobile specific carrier functionalities will not work? Overall, what functionalities are broken, or are not currently working?
Also want to know about tmobile s7 compatability
dankpilot20 said:
If I were to flash this on my t mobile s7 right now (with the verizon firmware), what t mobile specific carrier functionalities will not work? Overall, what functionalities are broken, or are not currently working?
Click to expand...
Click to collapse
Pretty sure wifi calling would not work
Rom is working good on tmobile s7 battery and just general fluidity, can't comment on full radio functionality scince phone is currently not on carrier but otherwise instructions were on point, my gratitude to the devs.
Base updated to Tmobile base CRF1 so all tmobile functions should now work. OP updated with new files and instructions
jrkruse said:
Base updated to Tmobile base CRF1 so all tmobile functions should now work. OP updated with new files and instructions
Click to expand...
Click to collapse
Can't wait to update and test it. Thanks for all your work jrkruse!
Keep us posted
Hello, I think you missed
rm -r /system/app/AmazonShoppingUG_TMO
@jrkruse i've been trying to read some stuff on SafeStrap... can it restore backups of FlashFire? I've been just switching my time backwards and using FlashFire to backup/restore internal storage...
In fact, is there any danger of using FlashFire with this hybrid ROM? Does FF interfere with the recovery capabilities of SafeStrap?
sylikc said:
@jrkruse i've been trying to read some stuff on SafeStrap... can it restore backups of FlashFire? I've been just switching my time backwards and using FlashFire to backup/restore internal storage...
In fact, is there any danger of using FlashFire with this hybrid ROM? Does FF interfere with the recovery capabilities of SafeStrap?
Click to expand...
Click to collapse
Safestrap is twrp recovery so no it wont restore flashfire backups. Flashfire only works on rooted phones so it can't be used on oreo
Hey I need help installing this. I have an At&t SIM card, my s7 flat is on stang5litre right now. Do I'll have to install the att nougat and then update?? Or Do I have to go back to t mobile nougat and update and hope it is rooted still .and then install this
I can't get gboard to work
thebatfreek said:
I can't get gboard to work
Click to expand...
Click to collapse
Did you got settings and input devices and set it as default device
It only gives me samsung keyboard. I've tried to update and uninstall (both methods apkmirror and gplay) no luck
---------- Post added at 06:08 AM ---------- Previous post was at 06:01 AM ----------
Did you got settings and input devices and set it as default device
Click to expand...
Click to collapse
It only gives me Samsung's keyboard as an option. I followed the steps in the instructions. No luck
thebatfreek said:
It only gives me samsung keyboard. I've tried to update and uninstall (both methods apkmirror and gplay) no luck
---------- Post added at 06:08 AM ---------- Previous post was at 06:01 AM ----------
It only gives me Samsung's keyboard as an option. I followed the steps in the instructions. No luck
Click to expand...
Click to collapse
Reboot too safestrap mount system find gboard it's either in system/app or system/priv-app select gboard folder the select delete. Leave safestrap then install gboard from playstore
Whenever I odin flash the safestrap bootloader as the instructions say, after rebooting, it never enters safestrap. Am I supposed to manually enter safestrap? I tried booting to recovery after the odin flash but there is no safestrap recovery anywhere, only some "SBL ERROR UPLOAD MODE". If I try to boot system, there is pink text in the top left saying "RMPB PROVISIONED". I tried following instructions from the start again, but it still does this whenever I try to enter safestrap.
Do I even need safestrap to debloat? because that's all I am trying to do
legittrickz said:
Whenever I odin flash the safestrap bootloader as the instructions say, after rebooting, it never enters safestrap. Am I supposed to manually enter safestrap? I tried booting to recovery after the odin flash but there is no safestrap recovery anywhere, only some "SBL ERROR UPLOAD MODE". If I try to boot system, there is pink text in the top left saying "RMPB PROVISIONED". I tried following instructions from the start again, but it still does this whenever I try to enter safestrap.
Do I even need safestrap to debloat? because that's all I am trying to do
Click to expand...
Click to collapse
Did you follow the entire install instructions. Do you have white samsung boot animation?
jrkruse said:
Did you follow the entire install instructions. Do you have white samsung boot animation?
Click to expand...
Click to collapse
Yea I followed the entire install instructions. My boot animation shows the samsung logo in white with a BLACK BACKGROUND, if that's what you mean. Is it supposed to be a samsung logo in black with a WHITE BACKGROUND? Also, after the samsung animation shows up, it shows the T-Mobile animation in pink text with a white background.
Maybe I made a mistake somewhere along the way, but I am not sure cause I re-installed from the beginning several times and followed all the instructions accordingly