Related
Hello Group
My Kaiser has stopped charging via a wall charger. I woke up this morning, and the battery had not charged at all
Some notes
-This problem occurs with 2 different chargers from 2 different outlets
-The device does show the charging indicators (lights and icons) even though it isn't charging
-The device does charge on PC USB port
-The device does charge on the car charger
-No visual bending of the USB pin
I've searched forums, and although I can find references to the opposite issue (wall power OK, USB power or car power NG), I can't seem to find any reference to what I'm seeing. My apologies to the group if I've missed any previous thread regarding this.
Thanks to all who help.
hello, strange problem. have you powered off the phone, pull out battery and try again, see if that might help
lupe
overhaulengines said:
hello, strange problem. have you powered off the phone, pull out battery and try again, see if that might help
lupe
Click to expand...
Click to collapse
Yup, and I have removed and re-inserted the battery.
I thought this also might have to do with a battery going bad, but from what I understand a wall charger gives more power than a usb port, so, again, if that were the case I'd think the opposite would be true
And I did find the thread on some Kaisers are eating up a lot of idle current, but after standby BatteryStatus/HomeScreen PlusPlus says just 1 ma
It sounds like your wall charger has gone bad. It may provide enough current to light up the charge LED, but it certainly doesn't have enough power to charge the battery. Try another wall charger- they all work the same way. I have a number of USB-mini devices and they all interchange for charging.
lsica said:
My Kaiser has stopped charging via a wall charger. I woke up this morning, and the battery had not charged at all
Some notes
-This problem occurs with 2 different chargers from 2 different outlets
-The device does show the charging indicators (lights and icons) even though it isn't charging
-The device does charge on PC USB port
-The device does charge on the car charger
-No visual bending of the USB pin
Click to expand...
Click to collapse
For what it's worth, you are NOT alone! The EXACT same thing has been happening to me on and off now for the past several months. At first, I thought it was the wall charger (I have 3 iGo chargers); however, ALL 3 of them failed to charge. I can understand one them failing, but ALL 3? No way. In my case, the car charger wasn't working either (it's also from iGo).
I ended up having to charge by USB. I eventually thought it was a battery problem, so I bought a new battery.
That worked...until the problem re-appeared again. The bottom line for me right now is that every now and then the wall charging does not work. So it will work fine for some time and then it will not, and then it starts to work again, etc. This erratic behavior happens with both batteries.
The duration of the wall charging working/not working is not fixed, I have found. For example, I have gone a couple of months of it charging fine and then it stops. At other times, it has been as short as a day. In any case, I usually find out about the problem in the morning, when I still see the amber charging light.
I'm convinced it's a Tilt problem.
I've loaded HomeScreenPlus to monitor current draw, and have seen the following:
-One wall charger is showing positive current (negative draw) SOMETIMES, and during those times it does charge the phone. This unit also makes the charge light turn off and on when I jiggle the plugs or cable. Obviously this charger is just broken.
-Another charger does not turn off/on the charge light or current draw when the wire is jiggled, but also never shows a positive current on the phone. This is an IGo charger, and based on previous posts here I'm thinking they just don't supply enough current to charge the phone. in other words, they suck
Any one have recomendations for a replacement wall charger for my Tilt?
i had the same issue with my htc tytn. no charger worked well for more than 5 minutes, until i got an official htc charger from my wifes shadow... now i use it because it works... and she uses the 3rd party one that came with my hermes when i bought it used... it charges her smart phone just fine, i assume beause it requires less juice? I dont know, but get a official htc branded charger... black berries have the same issue after they start getting a little old... probably something to due with wear and tear on resistors of some sort?
Found a charger that works
http://www.radioshack.com/product/index.jsp?productId=2935909
although I expect any ac to usb power adapter that supplies enough current will do. You just need to use your Kaiser/Tilt usb sync cable with it
I got exactly same problem for my Moto Q.
Tried several charger that worked before. Now, none of them works.
Here is the solution.
From www dot heberts dot net/motorola-q-wasnt-charging-via-usb
Start → Settings → Connections → USB to PC. I make “Enable advanced network functionality” on and off, and it works.
szniwawa said:
Tried several charger that worked before. Now, none of them works.
Click to expand...
Click to collapse
My Kaiser
- Charges via AC
- Charges via Doc
- Does not Charge vis USB
- Does not charge via Car Charger
But if I use an "audio Adaptor" which has usbMini Input it will charge whatever i plug in!!
Weird as hell.
Regards
Mo
I bought one of these from fleebay and it works a treat with ANY charger I plug into it.
HTC Multifunction Audio Cable YC A300
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Regards
Mo
I got a Tab yesterday without any cables. There was a little amout of battery left so i Rooted it and bought the "Euro Tap Bootstrab", i tried it, boot CWM, took a backup and then i turn it off. No battery left.
I got a USB cable today. Plugged it in my pc and tab, but I honestly cant see if charging or not. Sometime comes a large battery icon, but when pressing button it goes black
Cant hard reset.
Please help
Prozel said:
I got a Tab yesterday without any cables. There was a little amout of battery left so i Rooted it and bought the "Euro Tap Bootstrab", i tried it, boot CWM, took a backup and then i turn it off. No battery left.
I got a USB cable today. Plugged it in my pc and tab, but I honestly cant see if charging or not. Sometime comes a large battery icon, but when pressing button it goes black
Cant hard reset.
Please help
Click to expand...
Click to collapse
A PC will charge it very slowly. You need to plug it into a wall charger. You probably didn't brick it. See if you can get a USB wall charger from somewhere. Usually Blackberry chargers have a USB port that you can plug the cable into.
Using my HTC usb charger, thanks! So I just have to wait now?
Prozel said:
Using my HTC usb charger, thanks! So I just have to wait now?
Click to expand...
Click to collapse
Yeah, pretty much. I don't think backing up your Tab would have bricked it, even if the battery died mid-backup since you're reading from memory (internal), not modifying it.
Ehm, to be precise, I pressed "Reboot System", a samsung logo popped out, I waited a long time and it didnt change so i turned it off. Dont hope it's bricked
Just what!? I've charged it for about an hour and have litterly tried everything, this suck big time! It just wont start
Prozel said:
Using my HTC usb charger, thanks! So I just have to wait now?
Click to expand...
Click to collapse
I've charged it for about an hour
Click to expand...
Click to collapse
Just plugging it in HTC charger gives you almost nothing! Original Samsung charger has a "trick" inside - it has pins 2 and 3 of its USB output connector shortened, and on top of that it has also 2 resistors between these pins and +5 and GND pins. When you plug the cable in common charger the tab does not "understand" that now it must take full power from the charger and does not charge the battery actually (it should take appr 1 A current from the original charger for 4 hours to be fully charged). You should get an original charger, or get a special adapter connected between your HTC charger and tab's cable (I have seen some at Amazon.de), or to make an adapter yourself.
PS. There is a strong recommendation: never do any programing, flashing, backup or restore with battery discharged below 80%, better to do it with charger connected.
Thanks, good to know, however the orginal is lost.. so can i still use the HTC but it will take longer or?
Prozel said:
Thanks, good to know, however the orginal is lost.. so can i still use the HTC but it will take longer or?
Click to expand...
Click to collapse
I am afraid the tab will "think" that there is no charger at all. Connecting it to USB port of PC may give a result after several hours (very-very slow charging). Why don't you think over getting (or making) an adapter?!
Will defo get one, but then I would have wait till monday
Don't think i can make one
Prozel said:
Don't think i can make one
Click to expand...
Click to collapse
Actually I have made this adapter in 20 minutes (but I am formerly an electronic engineer, though).
Well, then try to connect it to PC for the whole night (do not forget to keep PC running ), maybe it works out...
First try to run it, if it hangs, try CWM/restore, if it is bricked - re-flash it.
Good luck!
Thanks alot, really! Will report back tomorrow. Again tanks
Just to be clear, when it's charged, does the battery icon have to be there all the time? It does disappear after some while when it's connected
Battery icon disappears in several seconds when the tab is switched off. Short pressing on power on button shows it again for some while. Moving dots under icon show charging in progress.
When the tab is fully charged it makes a short sound.
When the tab "understands" that it is connected to a charger, it also makes a short sound.
PS. After recovering the unit I recommend to install Battery Watch from the Market - it has a widget and you will always know the state of battery etc. And you can see a graph showing a battery behavior. And this application is on top of that shouting - "Charging started!", "Charging complete!", which is funny...
Guess mine doesn't charge?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry for delay - no, it does not charge... the reason was explained.
Yeah i see now. Thanks for taking you time. Defo appreciated
Just for reference, do NOT turn your GTab on while charging from a pc. It won't charge at all. Keep it turned off, and then wait for like 9 hours (it takes about 50 minutes to increase the charge to 10% from my laptop).
And when you flash, always have a full charge. ;-)
Sent from my GT-P1000 using Tapatalk
Hehe, yeah I just couldn't wait
Gonna pick up a HDMI dock tomorrow, until I've connected it to a laptop to see if it will charge.
So i got a proper charger, but does it charge?
Ok, I'm really sweating bullets here...
I had installed Cyanogenmod ICS alpha2 on my TouchPad and had spent all day on that tablet - loving the new lease on life it had. Before I went to sleep last evening it had like 10% power left. I plugged it in with the official Touchpad charger and left it charging until I woke up the next morning - a full 8 hours later.
To my surprise, it had 0 power left. Nada. Zip. I had checked the outlet and it was fully plugged in at both the tablet and the outlet to the wall. I knew I had turned off the tablet.
Now that it has 0% power - how in the heck am I supposed to boot into Palm mode to charge the battery (as I have heard that that is a work-around)?
I could really use your help here - many thanks.
@kstagg
Not sure if its the same problem...but I noticed recently that whenever i let my tp go down below 10%...and i hook up the charger...it doesnt charge at all...even with charger hooked up..battery drains....So when its 0% and I boot into WebOS to charge to fully....
For your issue, if your TP is dead...do you see battery sign when hooked to wall charger? if you do then wait for some time (mine takes 15-20 mins)...it will boot up..if your android is default then it will boot into android....without removing it from the charger...boot it into webos and charge...
If you cant do this..get it fixed by HP
What does it do when you plug it in?
First take the power adapter and twist off the bottom part and put it back on. When you connect it, do you get the battery "charging" symbol?
What I do is let it charge enough to hit moboot, then if I catch it in time I choose webOS and let it charge a little then reboot to CM, unplug the charger for a few seconds, then reconnect it. If it boots direct to CM the first time (moboot default) it's going to stay 'charging' but doesn't change from 0%. In that case, reboot and either go to webOS or reboot into CM9 a few times till it shows 1%... then disconnect the charger a few seconds and reconnect.
No matter what level the battery is at, if you boot into CM with the charger connected it will not charge. You have to unplug it for a few seconds and then reconnect it.
When I am hooked to wall charger, I see the battery symbol with the red line on it showing that battery is extremely low - in my case battery is dead. It won't even boot up when I take it off the charger. I just get the power cord symbol.
I have even been able to turn off the touchpad completely (since the TP has been on 0% power) by holding in volume up and power buttons simultaneously. I have no idea how I knew to do this - perhaps it was desperation. So I have even attempted to charge it via the wall outlet and waited a couple hours that way - but no change. It still has squat power.
Everything I've read is that once you've rooted the touchpad to a different OS, HP will no longer support it. Not sure where I would go to get it fixed by them either? Please correct me if I'm wrong. Hopefully it won't come to that though. Besides, the Mrs would kill me. :]
mountaindewmi said:
What does it do when you plug it in?
First take the power adapter and twist off the bottom part and put it back on. When you connect it, do you get the battery "charging" symbol?
What I do is let it charge enough to hit moboot, then if I catch it in time I choose webOS and let it charge a little then reboot to CM, unplug the charger for a few seconds, then reconnect it. If it boots direct to CM the first time (moboot default) it's going to stay 'charging' but doesn't change from 0%. In that case, reboot and either go to webOS or reboot into CM9 a few times till it shows 1%... then disconnect the charger a few seconds and reconnect.
No matter what level the battery is at, if you boot into CM with the charger connected it will not charge. You have to unplug it for a few seconds and then reconnect it.
Click to expand...
Click to collapse
Just tried twisting off the bottom of the HP charger and reattaching and am just getting the power plug icon.
I installed CM7 in my friends TP back when that was the current release and about a month ago it went dead, wouldn't power up at all (no battery icon) and they still took it and repaired it with no problems.
In your case though I think you are fine... just leave it charging in that screen for a while. Then do a home/menu + power button reboot (15+ seconds) and see if you can get moboot. It may go back to the charging screen but thats fine, give it more time and try again. A few of my coworkers have the same problem sometimes and they come running to me, lol.
mountaindewmi said:
I installed CM7 in my friends TP back when that was the current release and about a month ago it went dead, wouldn't power up at all (no battery icon) and they still took it and repaired it with no problems.
In your case though I think you are fine... just leave it charging in that screen for a while. Then do a home/menu + power button reboot (15+ seconds) and see if you can get moboot. It may go back to the charging screen but thats fine, give it more time and try again. A few of my coworkers have the same problem sometimes and they come running to me, lol.
Click to expand...
Click to collapse
Guess you can add me to one of those unfortunate souls you can add to your list who keeps running back to you. :]
My question to you is - where did they take it back to? Do you have a URL showing a shipping address? Sure, HP HQ is a few miles away from me - but am not about to go knocking on their door and say "Yeah, uh - can you fix this?" Besides that is a corporate HQ - not a manufacturing plant.
I have two TPs and one (older one by about a month) has the connector going loose... It usually charges fine but once in a while, it fails to connect. Depending on the angle of the way the tablet meets the micro usb I will sometimes fail to connect it properly.
My other one has a very tight micro ubs port and it's hard to plug in, but it works fine everytime...
So my point is, make sure you have an actual connection when you plug in for charge.
Dunno if I'm just lucky or what, but my tp died on the way to work this morning, so I plugged it in when I got here, got the red battery symbol, and let it charge for about half an hour. Here is where I am now:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I should also note that it died in cm9, showed the battery screen, then when I checked it next, it had 7% or so in cm9 as well. Never had to boot into webOS for anything.
mountaindewmi said:
I installed CM7 in my friends TP back when that was the current release and about a month ago it went dead, wouldn't power up at all (no battery icon) and they still took it and repaired it with no problems.
In your case though I think you are fine... just leave it charging in that screen for a while. Then do a home/menu + power button reboot (15+ seconds) and see if you can get moboot. It may go back to the charging screen but thats fine, give it more time and try again. A few of my coworkers have the same problem sometimes and they come running to me, lol.
Click to expand...
Click to collapse
OK, did exactly what you said and plugged it in w/battery indicator in the red and walked away for a few hours. When I came back just now so far it was at 93%. Can I get a Hallelujah?
Ok, can anyone tell me what to do to prevent this from happening again in the future? Do I have to do any routine cache cleanup (?) or other general maintenance? Will booting into WebOS to charge before battery gets too low always work?
Thanks again folks-
@kstagg
kstagg said:
OK, did exactly what you said and plugged it in w/battery indicator in the red and walked away for a few hours. When I came back just now so far it was at 93%. Can I get a Hallelujah?
Ok, can anyone tell me what to do to prevent this from happening again in the future? Do I have to do any routine cache cleanup (?) or other general maintenance? Will booting into WebOS to charge before battery gets too low always work?
Thanks again folks-
@kstagg
Click to expand...
Click to collapse
Booting in WebOS before battery gets too low and charging in webos always works for me
Last time i drain my battery to 0% for the calibration. But it charges just fine after that.
Sent from my GT-I9100 using Tapatalk
I'm glad it worked for you! I would say just don't let it fully drain, lol. If it does, just repeat the steps and you should be ok. And you don't need to boot into webOS when it is low, you can plug it in while in android and it will be fine, as long as the battery isn't at 0% which is when it shuts off.
Mine is actually at the same point right now, fully drained.
Sometimes mine doesn't charge....because the USB cord gets ever so slightly slightly unplugged from the adapter.
Be sure to try that in the future.
~ E.R.A.
Ordered one of these today, big battery plus qi charging, should get it Tuesday, I'll report back with a quick review how it does with the turbo
http://www.amazon.com/dp/B00J409JCM/ref=pe_385040_30332200_TE_item
Was looking to buy the same item. Let us know how it is. Specifically, if really charges ~10,000mAhr worth of battery. Thanks!
mikera67 said:
Ordered one of these today, big battery plus qi charging, should get it Tuesday, I'll report back with a quick review how it does with the turbo
http://www.amazon.com/dp/B00J409JCM/ref=pe_385040_30332200_TE_item
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Got it in the mail yesterday, nice looking packaging, the instructions are a bit strange, think it was translated but not proof read, but not a big deal since there is just one button.
The qi charging is pretty neat, slower than ordinary chargers (all qi chargers are limited) but so much nicer to use the phone without having to plug and unplug device. Both usb ports claim 2.1a, one labeled Samsung, one Apple. Everything seems to work fine, will get better idea today after letting it full charge overnight.
How many times can you can fully charge your phone using this?
Depends if you use the usb or wireless, usb is roughly 90 percent effective, so that works mean only 9,000 mAh, so about twice fully charging the droid, wireless is roughly 70 percent effective, that's about 1 full charge and three quarters charge.
That's on paper, haven't fully tested yet, doubt I'll ever will, like knowing I have a fully charged device ready to go. I just charged my nexus 7 wifi from half full, charges pretty darn fast. Love the wireless charging, no need to plug phone in, slower charge but that's expected. It has worked with every device we own, 2 iPad's,2 iPhones,3 android phones,2 android tablets and a kindle, yes we own a bunch of electronics, three kids plus the wife and me, the biggest kid of them all!
Can it be used in a "bypass" mode as a dock? In other words, have it plugged into the wall and charge devices without it constantly charging the internal battery of the qi device.
Yes it can, it is different from my ankor 12,000 mAh external battery, if it's plugged in to charge it will charge it's battery and whatever you have plugged in, this one seems to only charge the phone when plugged in, when the phone is full it charges the battery.
Now that could be wrong, the charging lights on the battery can be confusing what is actually going on, it could be charging the external battery and whatever is plugged in, the device manual looks like it was crudely translated,I hear the company is releasing a new pdf with updated instructions, either way it doesn't effect me.
One of the best features over other batteries is a normal micro usb is all you need to charge it, the ankor has it's own brick, lose or break it the battery is useless. Really love this, owned several packs and this one goes everywhere with me, my Droid hasn't gone below 55% , just too easy to charge wireless, set the phone down, hit a button it charges, no cord to undo to use the phone, awesome
Just looked at the online faq, there is pass thru charging, plus I found out it has two modes by long pressing the only button, red light on wireless on, red light off,usb charging only, here is from the faq
Pass-Through Wired Charging: While the power bank is connected to a USB charger, long press the power button so that only the red LED is on. You can now use the USB1 (1A) jack to charge a device (USB2 is disabled due to insufficient current).Pass-Through Wireless Charging: While the power bank is connected to a USB charger, long press the power button so that only the red LED is on. Place a mobile device on top of the power bank, and align the center of its wireless receiver with that of the wireless transmitter within 2 cm (0.6 inch).
I don't know anything about qi charging and am just learning. Are there others out there like this? This looks really nice I'm just curious for comparison.
Hi,
My HTC One has started turning Off as it goes below 30% and does not powers up until plugged in to charger. When i plug in charger it shows charging and 0% indication.
How can i rectify this ?
I too have seen that the device does not properly indicate the REAL battery level. Mine usually turns off when I am below 10%.
Yeah I'm sure there's a thread that solves this issue, I'm looking for it too. I've been having crazy battery issues, such as the phone randomly changing it's mind on the battery level. For example if I restart the phone (may have to do with if I was charging it or not) the battery either goes up to max, or sometimes goes down to ZERO and won't even start up (pre reboot it would be near 50%)
I think this happens because of using a ****ed charging cable. I have two main cables that I use, with the original HTC adapter (no longer have the HTC wire though, so I use the one from my Nexus 7). Over time the Nexus cable got damaged, and even data transfer was extremely slow and unreliable.
The funnest part? When I charge my phone and it's at 90%, and I restart and it claims 100%, so I power down and it keeps charging for another 10 minutes or so and finally the LED turns green, only to turn it back on and it claims 97% and keeps charging.
RAMBOcoder said:
Yeah I'm sure there's a thread that solves this issue, I'm looking for it too. I've been having crazy battery issues, such as the phone randomly changing it's mind on the battery level. For example if I restart the phone (may have to do with if I was charging it or not) the battery either goes up to max, or sometimes goes down to ZERO and won't even start up (pre reboot it would be near 50%)
I think this happens because of using a ****ed charging cable. I have two main cables that I use, with the original HTC adapter (no longer have the HTC wire though, so I use the one from my Nexus 7). Over time the Nexus cable got damaged, and even data transfer was extremely slow and unreliable.
The funnest part? When I charge my phone and it's at 90%, and I restart and it claims 100%, so I power down and it keeps charging for another 10 minutes or so and finally the LED turns green, only to turn it back on and it claims 97% and keeps charging.
Click to expand...
Click to collapse
HTC one M7 & M8 battery reset and calibration: http://forums.androidcentral.com/ve...ry-charger-reset-procedure-htc-one-m7-m8.html
Follow it to the letter, skip "Turn off Fast Boot in settings" as it no longer applies to our phones, unless you are running an old rom.
Seanie280672 said:
HTC one M7 & M8 battery reset and calibration: http://forums.androidcentral.com/ve...ry-charger-reset-procedure-htc-one-m7-m8.html
Follow it to the letter, skip "Turn off Fast Boot in settings" as it no longer applies to our phones, unless you are running an old rom.
Click to expand...
Click to collapse
I tried this but it does not help much.
Is anyone else experiencing a problem with their phone randomly switching off? Mines turns off at random intervals regardless of battery and when I turn it back on a percentage of the battery level drops. Please see link below for screen shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I already tried the above mentioned instructions to recalibrate the battery but it's not helping.
HTC One Turns Off at 30% Battery
I Am facing same issue. when battery level is on 30% then phone goes suddenly off. I have done catch partition in bootloader for calibration of battery but it is not permanent solution. I think there should be permanent battery calibration is solution but I dont know how to do it
My htc one m7 also turn off using 30% battery only i purchased a battery and give it to mobile shop but they are unable to change it and asked me to go htc service centre but i am out of warranty and trying to contact some private service centre its not an issue that can solved by yourself or doing battery calibration now i am using my phone with a 10400 mAh powerbank i will soon contact service centre or buy a phone with removable battery if servicing cost too much
ranju_ms said:
i purchased a battery and give it to mobile shop but they are unable to change it
Click to expand...
Click to collapse
Try another phone shop, any good shop should be able to replace your battery. There is a lot of uni-body phones nowadays, good phone shops know how to deal with them.