Database Develop

Mi5 dead! please some ideas!

Hi all,
I going to tell you the complete story and any ideas orsuggestions will be appreciated.
I bought my mi5 in July. It came with a fake ROM but Ichanged it to OFFICAL GLOBAL STABLE .
Since then, I used the device perfectly fine, and follow theMIUI forum regularly.
Then in November I applied for betatesting Team and theyaccepted me. As my bootloader was still locked, I tried option one from abovetutorial, so I directly downloaded in my phone the GLOBAL DEV ROM and Ichoosing the package I started using Nougat for about a month, more or less.
Then, the tragedy happened. I was in a bar, having my phonein my trousers back pocket, and I set down that way. One minute, no more. Thephone´s battery was around 70%. When I realized I quickly took it but it wasnot able to turn on… Nothing pressing power volume + or any combination… I came home and let it charging all night (wallcharger) and nothing the morning after.
I tried to connect it to my PC but nothing happened in the screen,but pressing Power Volume+ the Windowsdevice Manager recognized it as “Android phone”, so after reading some threads about bootloader issues I decidesto flash it. I requested permission and then flashed it with the latest CHINADEV version. The flashing was completed, but the phone still not turningon. NEXT STEP: Local Technical Service.
They had my phone during a week. They tried to change thescreen, nothing, the battery nothing, and I don’t know which other tests theyperformed but they called me back to tell they were not able of doing nothing.
Having the phone back at home, now I was not able to get thePC seeing it as Android phone again. Nothin. Desperate me, I continued to read in internet and found in XDA a video where basically, you open the phone (remove back, and some screws),short two pins, and the PC is able to see it through the Qualcomm USB driversin EDL mode. Then flashing IS POSSIBLE. That is true. I am able to flashing,and I have tried CHINAs, GLOBAL, older ROMs about a dozen. Always the flash processsucceed, but the phone still not turning on.
After flashing I let the phone the whole night plugged inthe PC usb. Nothing
Now is plugged again to the wall charger, but nothing.
There are many threads with different solutions, so guys,please, anyone with a good idea to try??
Many Many thanks in advanced

https://forum.xda-developers.com/mi-5/help/bricked-mi5-t3528810
Read this and
Use only the versions mentioned

this device is just a chinese junk i regret bought it , just after 2 days i bought it got hard bricked .
anyway flash 7.2.4 and if phone didnt boot use 3 button ( up + down + power ) for 1 minute or more and it must boot , it did work for me .

I just got brick yesterday and followed those instructions. It really worked. I was finally able to flash china dev 6.11.10. Latest dev said just "missed hello packet".
MiFlash version 2016.04 and china dev 6.11.10 was right combination for me. I connected Mi5 to PC while pressing vol- and power buttons, then I released them. I opened miflash, selected rom and chose "flash all". Flashing was completed. I tried to power on my phone pressing power button but nothing. But when I pressed vol- and power, I was able to get to fastboot mode. Rest is history. I flashed TWRP, booted to it and flashed LineageOS again.
Hope it works for you too!

xmmn said:
this device is just a chinese junk i regret bought it , just after 2 days i bought it got hard bricked .
anyway flash 7.2.4 and if phone didnt boot use 3 button ( up + down + power ) for 1 minute or more and it must boot , it did work for me .
Click to expand...
Click to collapse
Which 7.2.4 please??

[email protected] said:
Which 7.2.4 please??
Click to expand...
Click to collapse
hope it work for u . i read some people + me got device booted with this .
gemini_global_images_V7.2.4.0.MAAMIDC_20160129.0000.14_6.0_global
you can download from xiaomininja just search in google

xmmn said:
hope it work for u . i read some people + me got device booted with this .
gemini_global_images_V7.2.4.0.MAAMIDC_20160129.0000.14_6.0_global
you can download from xiaomininja just search in google
Click to expand...
Click to collapse
not worked

Nbkdnssr said:
I just got brick yesterday and followed those instructions. It really worked. I was finally able to flash china dev 6.11.10. Latest dev said just "missed hello packet".
MiFlash version 2016.04 and china dev 6.11.10 was right combination for me. I connected Mi5 to PC while pressing vol- and power buttons, then I released them. I opened miflash, selected rom and chose "flash all". Flashing was completed. I tried to power on my phone pressing power button but nothing. But when I pressed vol- and power, I was able to get to fastboot mode. Rest is history. I flashed TWRP, booted to it and flashed LineageOS again.
Hope it works for you too!
Click to expand...
Click to collapse
im not able to find the rom... could you help me?

[email protected] said:
im not able to find the rom... could you help me?
Click to expand...
Click to collapse
Sorry, it was global dev 6.11.10 that I used, not china dev.
I downloaded it via this link: http://xiaomininja.com/2016/11/11/m...1-10-is-out-download-it-here-for-your-device/

Nbkdnssr said:
Sorry, it was global dev 6.11.10 that I used, not china dev.
I downloaded it via this link: http://xiaomininja.com/2016/11/11/m...1-10-is-out-download-it-here-for-your-device/
Click to expand...
Click to collapse
Thanka for your hel but finally not worked...

Did you already tried to pressing and hold vol up + power button then at the same time repeatedly pressing vol down button until mi logo appear..?, id not yet..just try this method repeatedly.

JJeamy said:
Did you already tried to pressing and hold vol up + power button then at the same time repeatedly pressing vol down button until mi logo appear..?, id not yet..just try this method repeatedly.
Click to expand...
Click to collapse
I am trying that but screen is istill black.. maybe is a hardware issue? it is weird having flash working fine, isn´t it?

[email protected] said:
I am trying that but screen is istill black.. maybe is a hardware issue? it is weird having flash working fine, isn´t it?
Click to expand...
Click to collapse
Yup..it's weird thing...i suspect there's a hardware issue too..
But anyway..did you already tried to flashing fastboot rom with QFIL (qualcomm tool) too..?, if not yet..just try it..you can follow tutorial from this youtube here , just bypassing the step for installing any driver if your phone already detected as qualcomm port in your pc.
I try this method to get back my friend Mi4c from dead with condition like this too..just edl or qualcomm port while connect in device manager, then after flashing with this tool..i've try to power on with vol up + power and repeatedly vol down method above..then mi logo appear.
Hope your phone get back turn on soon..

JJeamy said:
Yup..it's weird thing...i suspect there's a hardware issue too..
But anyway..did you already tried to flashing fastboot rom with QFIL (qualcomm tool) too..?, if not yet..just try it..you can follow tutorial from this youtube here , just bypassing the step for installing any driver if your phone already detected as qualcomm port in your pc.
I try this method to get back my friend Mi4c from dead with condition like this too..just edl or qualcomm port while connect in device manager, then after flashing with this tool..i've try to power on with vol up + power and repeatedly vol down method above..then mi logo appear.
Hope your phone get back turn on soon..
Click to expand...
Click to collapse
Can you help me to find a correct ROM to try?

[email protected] said:
Can you help me to find a correct ROM to try?
Click to expand...
Click to collapse
You can try this official global stable fastboot rom that's still based android 6.0 here
If above direct link doesn't work..just visit this link , then choose "Xiaomi Mi5 Global Stable or China Stable Version Fastboot File Download..
If getting error while flashing..just put extracted folder of fastboot rom in the root of your system..ie C:\[folder_fasboot_rom]

Hi all,
After a million tests, now the phone is able to go to fastboot mode easly just pressing power&volume- (even having a black screen...) Any idea to see if this is still worth to fight?
Regards!

[email protected] said:
Hi all,
After a million tests, now the phone is able to go to fastboot mode easly just pressing power&volume- (even having a black screen...) Any idea to see if this is still worth to fight?
Regards!
Click to expand...
Click to collapse
Just try typing command "fastboot oem device-info" to see the status of your bootloader...is it still at unlocked or already relocked..?
If still at unlocked state..you can flashing fastboot rom with miflash tool.
Anyway what about QFIL method above that i said before..?, any change happen after flashing with this tool..?

[email protected] said:
not worked
Click to expand...
Click to collapse
Did you test it?
Keyvannn said:
Solved with this way
Originally Posted by adwinp
1: if you're detecting it as qcom 9008, there's a good chance it's in EDL mode, which is good news
2: download MiFlash from here: https://www.androidfilehost.com/?fid=24521665358595574
3: download the latest dev rom from here: http://update.miui.com/updates/v1/fu...ni&b=X&r=cn&n=
4: Extract the files to C:\
5: Open MiFlash & point the folder to the root ROM folder, example: C:\gemini_foo_bar, NOT C:\gemini_foo_bar\images
6: connect your phone & select flash all (1st option from the left, bottom of MiFlash tool)
This might take a few tries (example - you might receive "missed hello packets)
Once you're done, you can stay with the China Dev, unlock the bootloader & flash a xiaomi.eu rom, or CM.
Good luck.
Click to expand...
Click to collapse
------
I do this way several time but with updated miflash and fastboot rom and nothing happen.
But with this mi flash and global stable 7.2.4 and only selected #all flash#
My phone flashed
Im very happy
Thanks alot
Sorry for my bad english
Click to expand...
Click to collapse

Keyvannn said:
Did you test it?
Click to expand...
Click to collapse
I tried this and not worked for me...

JJeamy said:
Just try typing command "fastboot oem device-info" to see the status of your bootloader...is it still at unlocked or already relocked..?
If still at unlocked state..you can flashing fastboot rom with miflash tool.
Anyway what about QFIL method above that i said before..?, any change happen after flashing with this tool..?
Click to expand...
Click to collapse
I havent tried yet QFIL, but I will and let you know... Thanks so much!

Soft Bricked Redmi 4X Global, Can't find solution, please help me :(

Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits

try booting recovery from fastboot "fastboot boot *twrp image*.img"

Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install..........
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Well i am not at all an expert in miui, infact this is my first mi phone. But i think this tool called xiaomi adb/fastboot tool can help u. Google it.... It is available in reddit. One piece of general advice : before any kind of experiment always keep a preparation for the worst case scenario. I think ur phone is stuck at boot. U can try to hold the power button for about 10-15 seconds to turn off. Also just relax and have patience... It will b solved. Let me know how it goes.

Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Nevermind I misread... If you think clarity or the firmware messed up your phone I could give you my kernel and firmware for you to restore it
Though if you're desperate for a solution, I'd transfer a ROM into your phone and start over with it, you can flash MIUI also by flashing https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view after it

Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped

Ok I solved the problem using this method.
So I removed back cover, disconnected battery, connected the 2 points with a twizzer then flashed STOCK rom and it worked!! So relieved!
Thank you for the help anyway.

Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse

chandan shah said:
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Click to expand...
Click to collapse
Problem solved.
I got revived my redmi 4 again from softbricked locked bootloader,
By trying an older rom
santoni_global_images_V8.2.12.0.MAMMIEA_20170629.0000.00_6.0_global_751410291c.tgz​With miflash-20220218 in edl mode .

Redmi 4 (Santoni) bricked. Please help.

I unlocked my redmi 4 (Santoni) boot loader and flashed pixel experience ROM (https://mega.nz/#F!INZgnAZI!9fuWhfCuazOO5YPBjxGlmA). It was working fine for a few days (Small heating issue was there). Then one day while i was charging the phone the phone turned off and never turn back on. When i try to switch on the mi logo flashes for a split second and then turns off. I tried to get into recovery but couldn't.
I can get into fastboot mode. I tried flashing the phone using Mi flash tool and fastboot rom. But it shows an error "flash tz error". When i tried an old version of mi flash tool i get the "Unspecified error (0x80004005: FAILED (remote: Critical partition flashing is not allowed))
Please Help.....

can you access the twrp?

foneiamone said:
can you access the twrp?
Click to expand...
Click to collapse
No. I can only access fastboot.

Somebody please help...

unbrick
u can get to edl fastboot with testpoints.
redmi 4x edl fastboot
in edl fastboot flashing should work again :angel:

PierceB said:
u can get to edl fastboot with testpoints.
redmi 4x edl fastboot
in edl fastboot flashing should work again :angel:
Click to expand...
Click to collapse
Dont know how to do that. But i saw some tutorials on how to. Gonna try it. Thank you for the suggestion.

jaseemharry said:
Dont know how to do that. But i saw some tutorials on how to. Gonna try it. Thank you for the suggestion.
Click to expand...
Click to collapse
Did already share a description! https://forum.xda-developers.com/showpost.php?p=74818435&postcount=3 Or U can buy a deepflash cable this should also work.

jaseemharry said:
No. I can only access fastboot.
Click to expand...
Click to collapse
Have you tried installing TWRP via fastboot?

I had the same exact problem, i put my phone on charge & when i came back to check it was switched off. It wouldn't turn on except the mi logo. I tried to flash through fastboot turns out my bootloader was re-locked for some reason. I had to re-unlock it then proceed on to fash fastboot miui rom. Check if your bootloader is locked or not.

foneiamone said:
Have you tried installing TWRP via fastboot?
Click to expand...
Click to collapse
obstinate_penguin said:
I had the same exact problem, i put my phone on charge & when i came back to check it was switched off. It wouldn't turn on except the mi logo. I tried to flash through fastboot turns out my bootloader was re-locked for some reason. I had to re-unlock it then proceed on to fash fastboot miui rom. Check if your bootloader is locked or not.
Click to expand...
Click to collapse
This is a good idea! Probably u first try to install trwp in fastboot mode. If this doesn't work try to unlock bootloader again and then install trwp.
When all these Option doesn't work u still can open the phone and use edl fastboot mode to flash miui again.

jaseemharry said:
I unlocked my redmi 4 (Santoni) boot loader and flashed pixel experience ROM (https://mega.nz/#F!INZgnAZI!9fuWhfCuazOO5YPBjxGlmA). It was working fine for a few days (Small heating issue was there). Then one day while i was charging the phone the phone turned off and never turn back on. When i try to switch on the mi logo flashes for a split second and then turns off. I tried to get into recovery but couldn't.
I can get into fastboot mode. I tried flashing the phone using Mi flash tool and fastboot rom. But it shows an error "flash tz error". When i tried an old version of mi flash tool i get the "Unspecified error (0x80004005: FAILED (remote: Critical partition flashing is not allowed))
Please Help.....
Click to expand...
Click to collapse
No big problem just go in edl mode
Search how to go in edl Redmi 4 in Google
Problem is your boot loader is locked

Harshad patel R said:
No big problem just go in edl mode
Search how to go in edl Redmi 4 in Google
Problem is your boot loader is locked
Click to expand...
Click to collapse
but he already unlocked his bootloader before so it should be easier to unlock in again and then flash whatever he wants...

PierceB said:
but he already unlocked his bootloader before so it should be easier to unlock in again and then flash whatever he wants...
Click to expand...
Click to collapse
One time fail in flashing = locked boot loader
Or for unlocking bootloader from official (easy) need live mobile not dead

foneiamone said:
Have you tried installing TWRP via fastboot?
Click to expand...
Click to collapse
Tried but failed. Boot loader was locked again somehow.

PierceB said:
This is a good idea! Probably u first try to install trwp in fastboot mode. If this doesn't work try to unlock bootloader again and then install trwp.
When all these Option doesn't work u still can open the phone and use edl fastboot mode to flash miui again.
Click to expand...
Click to collapse
Tried unlocking boot loader and was not successful because the phone was bricked. My only option was to use edl test point. Now i installed miui 11. (Aprart from some minor bugs which can be eliminated by reflashing some other roms) Thank you guys. Now my phone is successfully unbricked.

For somebody who is having the same issues,
My phone (Redmi 4_Santoni) was completely bricked. The only thing i can access was fastboot by pressing the volume down + Power button combination. But i could not install twrp or any other recovery because my boot loader was locked. I got it fixed completely with the help of you guys (Thanks again) and i want to share the procedure i went through.
Condition: Completely bricked with only fastboot access, Locked bootloader.
I tried this video (https://www.youtube.com/watch?v=j27x5iJSS40) but failed because i could not access recovery. So my only solution was to use edl test point flashing. I followed this guide https://forum.xda-developers.com/showpost.php?p=74818435&postcount=3. It was very easy to do. But in the device manager (Press Windows key + R and then type devmgmt.msc and press enter) instead of showing "Qualcomm HS-USB QDloader 9008", the device is shown as "Qualcomm HS-USB Diagnostics 900E". The problem was you have to plug in in USB cable while the test points is being connected with a pair of tweezers or a paperclip as shown in the link above.
Make sure you already downloaded the latest mi flash tool from here https://xiaomiflashtool.com/ and download fast boot rom from the official website. (Go to https://en.miui.com/ Click rom downloads. Click flashing guide. Download the fastboot rom from there for your device.) Now flash your device using mi flash tool and voila. your phone is unbricked.
Thank you guys..

ASUS ROG2 SOFT BRICK

Hi ,
I have an ASUS ROG2 and I'm experiencing quite a problem here , I would like to know if this can still be rescue or not? or maybe I'm missing some steps here. here's what I've done so far.
Before it got to this dilemma my phone is suffering from autoshutdown so i rooted my phone using magisk and applied the thermal mode by one of the OP here. everything is working fine , the phone is not shutting down until today. it suddenly restart before me and it is stuck in ROG Logo.
what I've done.
1) i flash the stock boot img for my firmware version 2009.49 using fastboot flash boot 2009.49stock.img both slot A & B then followed by fastboot reboot so it can boot to system but it is still stock at the ROG Logo
2) i downloaded a RAW Firmware of 2009.49 , put my phone into fastboot mode. i made sure it was detected by the PC using the command fastboot devices and surely it was. i execute the flashall_AFT.cmd and waited , after it finishes my phone reboots but still stuck at the ROG Logo and here's the problem.
I reboot my phone into bootloader , scroll to Recovery after pressing Power button to select it , it boots and stuck at the ROG Logo at this point i'm confused since i need to factory reset it. so i downloaded TWRP for ROG2 Android 10 the one i usually use then i tried to boot from it using fastboot boot twrp10.img , it only boots and stuck at the ROG Logo again
3) I tried to flash a firmware using EDL mode , everything went well without any errors and there's the success message in Xiaomiflashtool , i reboot the phone to recovery and it is still stuck in ROG Logo.
any guesses? I'm kinda lost here since both RAW and EDL are not working.

KnowThyPro said:
Hi ,
I have an ASUS ROG2 and I'm experiencing quite a problem here , I would like to know if this can still be rescue or not? or maybe I'm missing some steps here. here's what I've done so far.
Before it got to this dilemma my phone is suffering from autoshutdown so i rooted my phone using magisk and applied the thermal mode by one of the OP here. everything is working fine , the phone is not shutting down until today. it suddenly restart before me and it is stuck in ROG Logo.
what I've done.
1) i flash the stock boot img for my firmware version 2009.49 using fastboot flash boot 2009.49stock.img both slot A & B then followed by fastboot reboot so it can boot to system but it is still stock at the ROG Logo
2) i downloaded a RAW Firmware of 2009.49 , put my phone into fastboot mode. i made sure it was detected by the PC using the command fastboot devices and surely it was. i execute the flashall_AFT.cmd and waited , after it finishes my phone reboots but still stuck at the ROG Logo and here's the problem.
I reboot my phone into bootloader , scroll to Recovery after pressing Power button to select it , it boots and stuck at the ROG Logo at this point i'm confused since i need to factory reset it. so i downloaded TWRP for ROG2 Android 10 the one i usually use then i tried to boot from it using fastboot boot twrp10.img , it only boots and stuck at the ROG Logo again
3) I tried to flash a firmware using EDL mode , everything went well without any errors and there's the success message in Xiaomiflashtool , i reboot the phone to recovery and it is still stuck in ROG Logo.
any guesses? I'm kinda lost here since both RAW and EDL are not working.
Click to expand...
Click to collapse
You could try booting into TWRP 3.4.0-0 Q Unofficial by mauronofrio without flashing ( fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img ) , then copy the zip over to root of internal storage, either 2009.49 or lastest 2012.65, from here. Be sure to check during flash which slot gets flashed first. Then repeat the process, booting twrp so that you can flash the other inactive slot. If you want to be sure you have changed slots, click on reboot in twrp and see which is active before flashing. Good luck
Hopefully flashing both slots successfully will do it. Let us know how you get on.

reg66 said:
You could try booting into TWRP 3.4.0-0 Q Unofficial by mauronofrio without flashing ( fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img ) , then copy the zip over to root of internal storage, either 2009.49 or lastest 2012.65, from here. Be sure to check during flash which slot gets flashed first. Then repeat the process, booting twrp so that you can flash the other inactive slot. If you want to be sure you have changed slots, click on reboot in twrp and see which is active before flashing. Good luck
Hopefully flashing both slots successfully will do it. Let us know how you get on.
Click to expand...
Click to collapse
Hi Reg !
Thanks for replying , i think I'm using the official version of TWRP so I'll give this a try , i should overcome the obstacle of booting into TWRP..
I'll let you know the outcome.

KnowThyPro said:
Hi Reg !
Thanks for replying , i think I'm using the official version of TWRP so I'll give this a try , i should overcome the obstacle of booting into TWRP..
I'll let you know the outcome.
Click to expand...
Click to collapse
Any news?

reg66 said:
Any news?
Click to expand...
Click to collapse
I used the TWRP you've linked. and i'm afraid that it is stuck on the rog logo again..
what i've done. ' fastboot boot twrpQ3400.img ' after i sent that command , the phone reboots and instead of going to twrp , it goes to rog logo and stuck there.
is there anyway i could check if there's partition? it feels like the phone has no partition that's why it is always going back to the rog logo.

KnowThyPro said:
I used the TWRP you've linked. and i'm afraid that it is stuck on the rog logo again..
what i've done. ' fastboot boot twrpQ3400.img ' after i sent that command , the phone reboots and instead of going to twrp , it goes to rog logo and stuck there.
is there anyway i could check if there's partition? it feels like the phone has no partition that's why it is always going back to the rog logo.
Click to expand...
Click to collapse
Did you change the name of the twrp file? the fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img cmd must have an identical name to the file, which as the original should be twrp-3.4.0-0-I001D-Q-mauronofrio.img
and just to be sure, you have the twrp img in fastboot folder, correct?

reg66 said:
Did you change the name of the twrp file? the fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img cmd must have an identical name to the file, which as the original should be twrp-3.4.0-0-I001D-Q-mauronofrio.img
and just to be sure, you have the twrp img in fastboot folder, correct?
Click to expand...
Click to collapse
Yes i did rename it as twrpQ3400.img and yes also , it is in the same folder as my adb & fastboot folder enviroment.
i'll try a different approach maybe using QFIL? although i don't know where to start like finding the XML / Programmer or firehose..
any ideas?

KnowThyPro said:
Yes i did rename it as twrpQ3400.img and yes also , it is in the same folder as my adb & fastboot folder enviroment.
i'll try a different approach maybe using QFIL? although i don't know where to start like finding the XML / Programmer or firehose..
any ideas?
Click to expand...
Click to collapse
Well i'm running out of ideas, never used QFIL so wouldn't know. since you cannot boot into twrp (i'm assuming you didn't relock bootloader? twrp won't work with locked bootloader), you could try this thread. be sure to use the supplied 1910.35 images as it tried and tested. read posts 1 and 2 at the very least, post 2 has useful steps
if successful, you'll then need to update 1910.64 before android 10 2004.60 to start with, then up to latest

reg66 said:
Well i'm running out of ideas, never used QFIL so wouldn't know. since you cannot boot into twrp (i'm assuming you didn't relock bootloader? twrp won't work with locked bootloader), you could try this thread. be sure to use the supplied 1910.35 images as it tried and tested. read posts 1 and 2 at the very least, post 2 has useful steps
if successful, you'll then need to update 1910.64 before android 10 2004.60 to start with, then up to latest
Click to expand...
Click to collapse
yes , i didn't lock my bootloader since i can still see the bootloader unlock message.. i'm also running low in ideas , for worst it is a bricked phone at best. i'll check the link.
thanks for helping. i'll still update this thread to maybe update u as well.
edit: i checked the link , i already did the xiaomi flash tool approach on the link.. everything was a success with no errors... maybe i shud give qpst tool a try? although i'm not familiar using it.

KnowThyPro said:
yes , i didn't lock my bootloader since i can still see the bootloader unlock message.. i'm also running low in ideas , for worst it is a bricked phone at best. i'll check the link.
thanks for helping. i'll still update this thread to maybe update u as well.
edit: i checked the link , i already did the xiaomi flash tool approach on the link.. everything was a success with no errors... maybe i shud give qpst tool a try? although i'm not familiar using it.
Click to expand...
Click to collapse
did you remember to shut the phone down after successfully flashing, boot into recovery and wipe data, then reboot? as per the instructions...?

reg66 said:
did you remember to shut the phone down after successfully flashing, boot into recovery and wipe data, then reboot? as per the instructions...?
Click to expand...
Click to collapse
yes , ofcourse since the phone is in EDL mode the only way to shut it down is by using Power + volume up + volume down like around 15 seconds then phone will shutdown since the 9008 COM in device manager will be gone this means that it's no longer in EDL mode. i wait like 1minute before i power it up to recovery by power + volume down then scroll to recovery in bootloader. then with no luck still stuck to Rog logo..
it's like the recovery partition is gone...

KnowThyPro said:
yes , ofcourse since the phone is in EDL mode the only way to shut it down is by using Power + volume up + volume down like around 15 seconds then phone will shutdown since the 9008 COM in device manager will be gone this means that it's no longer in EDL mode. i wait like 1minute before i power it up to recovery by power + volume down then scroll to recovery in bootloader. then with no luck still stuck to Rog logo..
it's like the recovery partition is gone...
Click to expand...
Click to collapse
I've been googling for you dude but no joy yet.... will have another look tomorrow

reg66 said:
I've been googling for you dude but no joy yet.... will have another look tomorrow
Click to expand...
Click to collapse
Thanks man , i'm searching for the qfil approach but i'm getting a sahara error. currently searching for fixes
edit : i manage to boot the phone using the link you've provided by using QFIL approach and not thru XiaomiFlashTool
the phone boots successfully and i can use the recovery again ! although there's a problem , it can't read my sim card and everything is like stock android without any skins or what.. i used the RAW firmware to update it but the problem with stuck logo is back :/
gonna re-flash using QFIL and i'll check some more ~ maybe use TWRP and flash the firmware there no?
edit: the one from the link is not working , stuck at rog logo.. but the one from the internet i was able to boot to system but can't detect simcard , also when plugging to PC it will go to crashdump mode.
also can't flash TWRP will result in stuck at ROG logo :/

was able to boot the phone but can't connect to wifi and is locked by google frp :/ any guides i can follow to remove that FRP without wifi connection ?

Sorry bud, really not sure what's going on with your phone or know much more. Good luck with it tho

KnowThyPro said:
was able to boot the phone but can't connect to wifi and is locked by google frp :/ any guides i can follow to remove that FRP without wifi connection ?
Click to expand...
Click to collapse
Actually, if you now have recovery, what about booting into twrp and flashing lastest 2012.65 zip from asus website, twice - both slots. see if that fixes your wifi issue
As you said using the QFIL approach worked to boot into system and recovery is back - boot to twrp from that state

KnowThyPro said:
Thanks man , i'm searching for the qfil approach but i'm getting a sahara error. currently searching for fixes
edit : i manage to boot the phone using the link you've provided by using QFIL approach and not thru XiaomiFlashTool
the phone boots successfully and i can use the recovery again ! although there's a problem , it can't read my sim card and everything is like stock android without any skins or what.. i used the RAW firmware to update it but the problem with stuck logo is back :/
gonna re-flash using QFIL and i'll check some more ~ maybe use TWRP and flash the firmware there no?
edit: the one from the link is not working , stuck at rog logo.. but the one from the internet i was able to boot to system but can't detect simcard , also when plugging to PC it will go to crashdump mode.
also can't flash TWRP will result in stuck at ROG logo :/
Click to expand...
Click to collapse
I think my i messed my phone like yours. Can you provide me step by step? I have tried those step one by one but still stuck at rog logo

Question dm-verity corruption Redmi Note 10 5G

Hello,
I don't know if this is right forum. If this is wrong forum, please suggest me the right one.
I have a Redmi Note 10 5G bought at China. There are all Chinese apps and No Google apps. I didn't like it so, decided to flash it into Global ROM. I have done this kind of thing many times before, but never in this device and never got this error. I downloaded the latest Global ROM which was MIUI 12.0.7.0. I extracted it and flashed using Xiaomi ADB and Fastboot tools. Everything was alright. When the device rebooted, I got:
dm-verity corruption.
Your device is corrupted.
It cannot be trusted and may not work properly.
Press power button to continue.
Or, your device will power off in 5s.
I pressed the power button and it got stuck on redmi logo forever.
Then i downloaded MIUI 12.0.6.0 Global. Then flashed it, got the same error? I tried all tricks on internet, nothing worked.
I thought Nothing is working, lets just install Chinese ROM and use it anyway. I flashed Chinese ROM and got the same error ! What is going on? What is problem?? I haven't locked bootloader
I am now hopeless. Can anyone tell me how to fix this? Should I take to somewhere to repair, or there is a trick? Any answer will be thanked!
My device:
Redmi Note 10 5G (6GB RAM 128GB ROM)
My PC:
Dell Inspiron 15 3567 (Windows 10 21H1 Latest)
Thank YOU!!!

My guess is you've re-locked phone's bootloader after flashing the ROMs in question.

No I did not Re-Lock the Bootloader

jwoegerbauer said:
My guess is you've re-locked phone's bootloader after flashing the ROMs in question.
Click to expand...
Click to collapse
no,
while for you "un known" why don't you check my post "root gained" you'll get rid of that dm-verity corruption

simika said:
no,
while for you "un known" why don't you check my post "root gained" you'll get rid of that dm-verity corruption
Click to expand...
Click to collapse
Hello, Thank you for replying. I already tried that. I wont get the error, but my phone is stuck on Redmi Logo. I don't want to fix that error. I just want to get out of bootloop. Even after I press power button, I got stuck on Redmi Logo

Un KnOwN said:
Hello, Thank you for replying. I already tried that. I wont get the error, but my phone is stuck on Redmi Logo. I don't want to fix that error. I just want to get out of bootloop. Even after I press power button, I got stuck on Redmi Logo
Click to expand...
Click to collapse
bootloop also is NOT a real one.. if you read ( or see the screenshot i previously posted in another thread , you need to press POWER button.. press it even 2 times and be sure it's going to load your phone properly !
i was in the same situation at begin and it's not a real bootloop
( and if you load vbmeta you won't even get that message/bootloop at all ! )

simika said:
bootloop also is NOT a real one.. if you read ( or see the screenshot i previously posted in another thread , you need to press POWER button.. press it even 2 times and be sure it's going to load your phone properly !
i was in the same situation at begin and it's not a real bootloop
( and if you load vbmeta you won't even get that message/bootloop at all ! )
Click to expand...
Click to collapse
WELL i tried everything you said. i even waited overnight. nothing happened only redmi logo. I took my phone to repair, so lets close this

Hat ihr Telefon schon repariert? Wieviel wurden Sie bezahlen? Mein Telefon ist wie Ihr Telefon defekt.

Has your phone been repaired yet? How much would you pay? My phone is broken like your phone.

Un KnOwN said:
Hello,
I don't know if this is right forum. If this is wrong forum, please suggest me the right one.
I have a Redmi Note 10 5G bought at China. There are all Chinese apps and No Google apps. I didn't like it so, decided to flash it into Global ROM. I have done this kind of thing many times before, but never in this device and never got this error. I downloaded the latest Global ROM which was MIUI 12.0.7.0. I extracted it and flashed using Xiaomi ADB and Fastboot tools. Everything was alright. When the device rebooted, I got:
dm-verity corruption.
Your device is corrupted.
It cannot be trusted and may not work properly.
Press power button to continue.
Or, your device will power off in 5s.
I pressed the power button and it got stuck on redmi logo forever.
Then i downloaded MIUI 12.0.6.0 Global. Then flashed it, got the same error? I tried all tricks on internet, nothing worked.
I thought Nothing is working, lets just install Chinese ROM and use it anyway. I flashed Chinese ROM and got the same error ! What is going on? What is problem?? I haven't locked bootloader
I am now hopeless. Can anyone tell me how to fix this? Should I take to somewhere to repair, or there is a trick? Any answer will be thanked!
My device:
Redmi Note 10 5G (6GB RAM 128GB ROM)
My PC:
Dell Inspiron 15 3567 (Windows 10 21H1 Latest)
Thank YOU!!!
Click to expand...
Click to collapse

1. power on phone insert usb cable mobile show dm-verity corruption option then quick click 3 time volume up and down
your mobile skip restarting
2. after phone on. go setting developer option oem on and mobile go to update option and update your phone .

Free Solution in this video

Free Software X said:
1. power on phone insert usb cable mobile show dm-verity corruption option then quick click 3 time volume up and down
your mobile skip restarting
2. after phone on. go setting developer option oem on and mobile go to update option and update your phone .
Click to expand...
Click to collapse
nice tip!

boot to fastboot and issue command " fastboot oem cdms "
will fix the dm verity issue

chopwell20 said:
boot to fastboot and issue command " fastboot oem cdms "
will fix the dm verity issue
Click to expand...
Click to collapse
how to do this pls?

heyika26 said:
how to do this pls?
Click to expand...
Click to collapse
You must have Minimal ADB and Fastboot installed in your PC.
After installing it, open it.
Write exactly the command line above.
Connect you phone via USB while is in FastBoot Mode*, with your PC.
* For FastBoot Mode on your phone, Turn OFF your phone.
Press VOL Down & Power Button for some secs together.
** Not sure if this is necessary ,but before doing all these, you have turned ON Developer Options on your phone. (search google how to enable Developer Options)
OEM Unlocking Checked & USB Debugging Checked.
Press Enter and you're done.
For me it worked!