Hi all , i made mistake when i wanted to downgrade my P40 pro , in installed ANA version of software instead of ELS, don't know how that install even managed to go thorough ,
Now when i try to install ELS version no mater how i try, i cant i tried DLOAD from OTG/CARD ( get wrong version of software error) and fast boot via hisuite prxoy and HiSuite i get error on verify part.
Anyone have some advice that does not include me going to Huawei since that would cost me here same as new phone.
PS any ANA version install manages to finish, but i have problem with not having imei, keyboard, cant use SIM card and it keeps restarting every couple mins.
Post screenshots of:
Firmware details in ProjectMenu: dial *#*#2846579#*#* \2.Veneer Information\1. Version Info
badmania98 said:
Post screenshots of:
Firmware details in ProjectMenu: dial *#*#2846579#*#* \2.Veneer Information\1. Version Info
Click to expand...
Click to collapse
that is the problem i cant, since i dont have keyboard i cant go past welcome screen , apparently emui 12 wants you to log in to huawei first
i do remeber that it was c432 r4 - that stayed in my head.
now i am trying difrent versions on recovery via hisuite proxy
So far only ANA versions wants to go through.....
and i am sure it was ELS even google has it remembered in firm finder v2 , not sure how did i end up on ANA
i could try to downgrade to ANA emui 11 to still have USB options but i think i could pass welcome screen and hope that phone does not restart until i take picture of project menu.
Do you have a NM card?
yeap i tried with DLOAD method that i got from couple of posts ( some of them yours ) , difrent versions of system ( almost got my SSD full....) always get error that it is wrong version when i try to do update via SD/OTA from recovery. So far ANA is first one that actually completed....
i even tried to change names of files to match ANA but nothing ( that was long shot to be fair )
i tried to mix files to, but update_sd_base must be from ANA version anything else fails right away.
Seems now problem is downgrading ANA EMUI 12 to 11 - no mater what system i try it wont whether is ANA or ELS - Any ideas?
Okay no mater what i try to install i get software install failed wrong version.... Same with Hisuite proxy and dload method. Anyone have any ideas?
I sent it to phone service center please close this thread.
Related
Hello,
My P9 is completed Wiped and dont want to Install a Firmware via DLOAD everytime i try to install it fails.
I cant use Fastboot because i have the Bootloader Unlock but the OEM is Locked.
I dont have the TWRP Recovery i only have the eRecovery.
Please Help me ..Thank you...
Mangono said:
Hello,
My P9 is completed Wiped and dont want to Install a Firmware via DLOAD everytime i try to install it fails.
I cant use Fastboot because i have the Bootloader Unlock but the OEM is Locked.
I dont have the TWRP Recovery i only have the eRecovery.
Please Help me ..Thank you...
Click to expand...
Click to collapse
I guess you and I are stuck with the same problem.
jonezie said:
I guess you and I are stuck with the same problem.
Click to expand...
Click to collapse
I solved The Problem if you need help say it
Mangono said:
I solved The Problem if you need help say it
Click to expand...
Click to collapse
Please help me out
Guide
jonezie said:
Please help me out
Click to expand...
Click to collapse
So i cant Garantee that this will work for you but it worked verry fine with my (EVA-L09).
1. I started my P9 in Fastboot Mode (Hold Volume Down + Connect USB Cable)
2. I used the Programm DC Phonix 35 at First and used Method 2 (see Link). I used the File for the Dual Sim Version (EVA-L19, you find the File on the Data Base of the DC Phonix Tool) of the P9 because there is no Version for the Solo Sim. But it worked verry fine.
3. After i completed Method 2 i started the Phone and saw that it worked again but it is an verry small android version with no function exept Phone Settings and some Huawei Internal Software.
4. I restarted the Phone into the Fastboot Mode and used Method 1 with the Update.app of the Firmware EVA-L09C432B136. But only do step 1. Step 2 will not work !! After the Process was completed i restarted it and it worked.
5. After that i Searched in the Android Options for an Update and found the EVA-09C432B182. You need to install it to fix some errors. After the Phone installed by itself the B182. I used the Huawei Updater with the Hisuite to Upgrade to B361 because the Phone didnt found a new Version by itself. Guide for Huawei Updater with Software Links
And now my P9 is on the EVA-09C42B361 and can find updates by itself i know the new B383 is out but i will wait a week than the Phone will find the Update by itself and i dont want to Brick it again. In the next Days your Phone will show you that the B383 is avalible.
I hope my Little Guide can Help you. If you have any Problems please write me I know that the DC Phonix tool costs Money but it was the only way it helped me. But i have some credits left at my account i think you can use them if you want
Sorry for my Bad english if there are some questions left please write me
Mangono said:
So i cant Garantee that this will work for you but it worked verry fine with my (EVA-L09).
1. I started my P9 in Fastboot Mode (Hold Volume Down + Connect USB Cable)
2. I used the Programm DC Phonix 35 at First and used Method 2 (see Link). I used the File for the Dual Sim Version (EVA-L19, you find the File on the Data Base of the DC Phonix Tool) of the P9 because there is no Version for the Solo Sim. But it worked verry fine.
3. After i completed Method 2 i started the Phone and saw that it worked again but it is an verry small android version with no function exept Phone Settings and some Huawei Internal Software.
4. I restarted the Phone into the Fastboot Mode and used Method 1 with the Update.app of the Firmware EVA-L09C432B136. But only do step 1. Step 2 will not work !! After the Process was completed i restarted it and it worked.
5. After that i Searched in the Android Options for an Update and found the EVA-09C432B182. You need to install it to fix some errors. After the Phone installed by itself the B182. I used the Huawei Updater with the Hisuite to Upgrade to B361 because the Phone didnt found a new Version by itself. Guide for Huawei Updater with Software Links
And now my P9 is on the EVA-09C42B361 and can find updates by itself i know the new B383 is out but i will wait a week than the Phone will find the Update by itself and i dont want to Brick it again. In the next Days your Phone will show you that the B383 is avalible.
I hope my Little Guide can Help you. If you have any Problems please write me I know that the DC Phonix tool costs Money but it was the only way it helped me. But i have some credits left at my account i think you can use them if you want
Sorry for my Bad english if there are some questions left please write me
Click to expand...
Click to collapse
Thanks so much for your help. I'll follow these steps as you've stated and see how it goes. By the way, I'm on single-sim Eva-L09C432B378. I'll try use the DC Phoenix 35 but it will cost me money as you've said. May I please use your leftover credits at your account?
Thanks in advance
jonezie said:
Please help me out
Click to expand...
Click to collapse
No Problem Please write me a Personal Message i dont Post My Account in this Public Thread
I considered myself to be noob here . It's my fault not to did a lot of research as possible before I proceed my upgrade since I wanted my Huawei Mate 20 Pro (LYA-AL00) (chinese version with no finger print) to run Android 10 instead of 9 (Which I didn't know what version I was using but I believe it was the latest of Android 9 for Mate 20 Pro). What I did was following this guide >
https://ministryofsolutions.com/202...-emui10-android-10-stock-firmware-update.html
everything described in the above link seems legit so I immediately follow step by step and download the stock firmware almost 5 hours. After using OTA with dload I saw the screen install the firmware successfully. However, after few minute the phone boot up and it showed "your device has loaded a different operating system". In such case, I couldn't do anything with erecovery or even using the hstool here: https://forum.xda-developers.com/mate-20-pro/how-to/manual-upgrading-mate-20-pro-bl-locked-t3905924
by using the method above, i stuck at (install recovery or install system) where my phone screen show circle with 5% processing, then hi suite say failed recovery. In such case, I believed I might install the wrong firmware which isn't allow for my phone? If it is wrong why the phone allow to install the firmware via dload? If not compatible or wrong should not let user process the work.
Right now I stuck at (Your device is loaded a different operating system) and nothing I can do in erecovery including using wifi to update. Can anyone help? Thank you
Sorry for my bad english.
NEED HELP !!!! same problem on lya l09
i used hisuite to update my mate 20 pro LYA L09 to emui 10 ( the official way ) after the update was installed my phone was stuck in this black screen " your device has loaded a different operating software " . i tried using erecovery " get package info failed"
OTG DLoad package method, if works you will be fine. If not, try DC phoenix with a Dload package. Last time I experienced same thing. Then DC phoenix helps.
hello,
To install the GMS on my p40 pro +, I tried the downgrade method with Hi-Suite proxy and Hi-suite 10.0.0.510.
I just tried to downgrade my p40 pro + from 10.1.0.156 (c432) to 10.1.0.131 (C432).
Now my phone constantly reboots.
I manage to switch to Recovery but he gives me the message : Get package info failed.
I don't see how to charge my smartphone even if it is with the latest EMUI version.
please help. thank you
try with 10.1.0.144, this should work with p40 pro +
Tunn3l said:
try with 10.1.0.144, this should work with p40 pro +
Click to expand...
Click to collapse
how do you install it without access to HSuite ?
I have the same problem, I can only access to
- Update and recovery system ( got the same error than him )
- Usb update option, don't know how to continue with that.
- Fastboot, but I can also not do much since is "locked"
Thanks for the help!
https://github.com/ProfessorJTJ/HISuite-Proxy/wiki/System-Recovery-Rom-Instruction-(-Soft-Bricked-)
Same problem
joe.cocs said:
hello,
To install the GMS on my p40 pro +, I tried the downgrade method with Hi-Suite proxy and Hi-suite 10.0.0.510.
I just tried to downgrade my p40 pro + from 10.1.0.156 (c432) to 10.1.0.131 (C432).
Now my phone constantly reboots.
I manage to switch to Recovery but he gives me the message : Get package info failed.
I don't see how to charge my smartphone even if it is with the latest EMUI version.
please help. thank you
Click to expand...
Click to collapse
Dear We have the same problem, please help as it reboot we cant flash with Hisutie.... thanks
10.1.0.156 (c432) not suported. Flash this Rom with HiSuite Proxy?
Manuela.k said:
10.1.0.156 (c432) not suported. Flash this Rom with HiSuite Proxy?
Click to expand...
Click to collapse
Thanks but the phone will reboot before Hisuite proxy finishing download so cut the connection...:crying:
Test it with this version of HiSuite
Manuela.k said:
Test it with this version of HiSuite
Click to expand...
Click to collapse
Thanks also 550 510 we try both of them but as it will reboot we cant finish flash
xmarketx said:
Thanks also 550 510 we try both of them but as it will reboot we cant finish flash
Click to expand...
Click to collapse
I have the same issue. Please help :crying: I and desperate what to do or try.
Have you found a solution?
Hello,
ifound a solution
I have a P40 pro Plus with the buid 10.1.0.156 (C432E2R3P3).
I used the following method to downgrade to version 10.1.0.132 :
https://www.youtube.com/watch?v=q2b_lBPc-Hk
and for install GMS:
https://www.youtube.com/watch?v=2Lcq...ature=youtu.be
The only downside is that it is not possible to update the version afterwards, but it works while waiting for a possible commercial release from the USA.
P40 pro 10.1.0.158 (636E8R4P1) how to downgrade
What method should I use to downgrade? Hisuite
Can't help me downgrade.
Cell phones don't have GMS just like they're gone.
accidently installed wrong version of OS even Firmware Finder approved it for installation, now my mobile reboots after every 20 seconds ....
any solution ????
we messed with our motherboard by installing wrong OS via Hisuit proxy ...
only solution is to take your mobile to Huawei Service center for mainboard replacement.. it will be free under warranty
Sorry to say but You have to go to Huawei service center and they need to replace the moterboard , this is the only way to get phone working. If You flashed wrong firmware you damaged IMEI and security certificates so no way that flashing good firmware will work now .
I had the same problem. No IMEI and constant reboots. I have sent the phone to Huawei for repair and they said they have to replace the main board. Yesterday I contacted the guy from the first reply in this thread https://forum.xda-developers.com/t/huawei-p40-pro-soft-brick-reboot-only.4166553/
He really managed to repair the phone and it is working normally now. It took about 2 hours and he charged 40usd. So I can definetly recommend him as I would have to throw away the phone otherwise.
any one can post preload and cust file for p40 pro c636 regions, i can find any on the internet.
or anyone can help me unbricked my phone
thank you
kellogsvibrant said:
any one can post preload and cust file for p40 pro c636 regions, i can find any on the internet.
or anyone can help me unbricked my phone
thank you
Click to expand...
Click to collapse
It is better to provide the all story and many, many details. From what EMUI version was on the phone, what methods you used till the current situation. There are so many variables.
sorry, im was on emui 12, then i really need gms to work, reverted back to emui 10, and iupdated to emui 12 using flashdrive trick, i DL wrong firmwaree i guess, then it got bricked stuck on erecovery mode. after i flashed using usb
kellogsvibrant said:
sorry, im was on emui 12, then i really need gms to work, reverted back to emui 10, and iupdated to emui 12 using flashdrive trick, i DL wrong firmwaree i guess, then it got bricked stuck on erecovery mode. after i flashed using usb
Click to expand...
Click to collapse
Write for every step what firmware, files have been used.
I updated my huawei to beta emui12, i got in ang got the OTA for emui 12, but i really need GMS now, then i used hisuite proxy downgraded my p40 pro to emui 10, but cant remmeber exact number, it was success then my pc wont detect my huawei, lastly i tries using the usb otg OTA update. the after restart i get this error
any one can link me full firmware files for this region , il gladly appriciate.
kellogsvibrant said:
any one can link me full firmware files for this region , il gladly appriciate.
Click to expand...
Click to collapse
It is not so easy as you think it is.
In my opinion it is better to go to the service.
It is a slightly chance to fix with HarmonyTP cable + HiSuite Proxy (Recovery OS).
Looking at your questions and answers, you have no idea about how the things works with this phone.
You can try to ask here too:
HISuite Proxy ( Huawei Phones' Updater & Soft-Brick Fixer )
Introduction Simply this application reverse engineers ( modifies ) HISuite, to be able to manipulate its Huawei servers' response data for installing official roms of Huawei, customarily. Features Support for OTA ROMs Support for FullOTA ROMs...
forum.xda-developers.com
or on telegram group here:
Huawei Firm Finder / HiSuite Proxy Support
https://professorjtj.github.io
t.me
I already sent a private message to a Recognized Contributor on XDA.I think that If post here I could help also other members.
I have problem with my new huawei p30 pro.It was stuck on android 9 and emui 9 ,I tried every official modes to force the update.But I couldn't achieve that.
So I tried with hisuite proxy .I finded my Device model(VOG-L29) region: C431-HW-EEA , then clicked on add rom on firm Finder v2 .The version was the lastest 102.0.0.134
The procedure was smooth and I choosed the right ROM (100% sure!I already have that webpage open)Once finished the smartphone installed the EMUI 12 but once restarted the massage: Your device has loaded a different operating system! scared me .
Do I broke the phone? Is there a way to fix it without changing the motherboard?
Thanks a lot every help will be appreciated so much
Little Update.
I tried several methods trying solving this big issue.
1.Update from Erecovery trying to download and recover the package via WIFI
RESULT:the phone updated from 12.0.0.134 to 12.0.0.149 but once rebooted the
same result with black screen and the massage: Your device has loaded a different operating system
2.I done the same procedure of this guy
I also saved the log file of hisuite and here are the version before I made that mess:
* FirmWare_Base:VOG-LGRP2-OVS 9.1.0.240
* FirmWare_Cust:VOG-L29-CUST 9.1.0.4(C431)
* FirmWare_Preload:VOG-L29-PRELOAD 9.1.0.2(C431R2)
So The ROM I selected on huawei firm finder v2 was good(VOG-l29 102.0.0.134)
I succeeded to Recover and install the previous ROM,the 9.1.240,with hisuite and hisuite proxy
but once finished an error on the p30pro appear: Software install failed.
tried also the 10.0.0.195
I'm thinking about dload with otg or nm card but I don't know the procedure.
Could you guys help me?
Thanks
As the title changed I solved the problem of soft brick.
I write here the tutorial to help those who might have the same problem.
Requirement :OTG cable ,exFat formatted pen drive and the right Firmware to flash.
Create a dload called folder inside the pen drive and put in it the 3 Firmware's .zip file(base,cust and preload)
I specify that my p30 was bricked on version 12, so my first attempt was to load the version
VOG-L29 hw eea VOGUE-L29C 9.1.0.115(C431E4R2P2).
To flash the firmaware from usb pen take the phone off and hold the volume up button for several seconds while we connect to charge the phone .Connect the usb pen and from erecovery choose OTG update mode.
The result was an unbricked p30 pro but no fast charge and usb data tranfer and I can't get any type of update from OTA.
So I downloaded this version:
https://huaweidownload.com/download/p30-pro/vog-l29-2/10-1-0-123/
I flashed my P30 Pro once again, and of course no USB connection and fast charging. But system afetr few minutes started finding upgrades via OTA. Passed from 10.1.0.179 to 10.1.0.201. Of course I let it upgrade.
It was 11.0.0.138 first, then 11.0.0.174(last EMUI version before version 12 ) came and USB connection was restored.
you can also find other firmware here:
https://androidhost.ru/search.html
https://www.hardreset.info/it/devices/huawei/huawei-p30-pro/faq/firmware/huawei-firmware/
Even if I am a programmer I am new in the world of android bricks and I spent 2 afternoons and many attempts to solve the problem.
The last problem concerns the creation of a backup point. I have tried different version of HiSuite and both windows 10 and 8.1.But I couldn't get data from phone
The solution is to install the Androis ADB inteface Drivers while the phone is connected to the PC. I believe that this way data information is injected to the phone as well as installed on the PC.
take the drivers from here: https://oemdrivers.com/usb-adb-interface
or here: https://www.drivermarket.net/adb-fastboot-drivers-v1-4-3-download-for-windows-latest/
once you carry out this procedure you fixed everything