So i have a xiaomi mi 9,using pixel experience and has android version 9.0 .I would like to install galaxy apps and be able to use it but i dont know how.I tried flashing a galaxy apps zip file but i didnt get the galaxy app.I hope someone will be able to help me.I have magisk and also xposed
Is there an updated guide for installing root/twrp for galaxy s10 android 10 can't find one anywhere
https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
Hi everyone!
I'm trying to pair my galaxy watch gear s3 to my rooted s21 ultra and I haven't been having the best luck and getting a successful pair, I've tried various things out there such as, Magisk Hide, Magisk Hide Props and changed my devices fingerprint to a Google Pixel 3 no luck, and finally I've tried the Bluetooth patch module in Magisk alongside with some code I found in a forum post about the same issue with no success, the code ended up bricking my phone twice even after double checking that I've entered it in correctly and in a reasonable one line at a time sequence.
I've had successful pairs with other rooted devices also.
Please let me know if there is any other possible fixes regarding my issue, thanks!!
S21 Ultra SM-G988B
Read my post here
Galaxy S10+ SM-G975F Galaxy Watch pairing issue with Magisk
Hello, I am curious to see if anyone else had or still has this issue and if there is a fix for it. Devices involved: Phone - Samsung Galaxy S10 Plus (SM-G975F) Android Version: 10.0 Build Number G975FXXU4CTC9 Watch - Samsung Galaxy Watch 46mm...
forum.xda-developers.com
dr.ketan said:
Read my post here
Galaxy S10+ SM-G975F Galaxy Watch pairing issue with Magisk
Hello, I am curious to see if anyone else had or still has this issue and if there is a fix for it. Devices involved: Phone - Samsung Galaxy S10 Plus (SM-G975F) Android Version: 10.0 Build Number G975FXXU4CTC9 Watch - Samsung Galaxy Watch 46mm...
forum.xda-developers.com
Click to expand...
Click to collapse
I've tried using this on my second try but every time i did it it put my phone through a bootloop, i've noticed when i did it as well it said device size too small what could i do about that?
Thanks!
Is it maybe possible for someone to make a magisk module for this fix as it gives a lower chance of bricking a device?
Just a curious thought
DONT TRY THIS - It will bring your phone only to a reboot-loop as Auzzy wrote.
What a fck...
dr.ketan said:
Read my post here
Galaxy S10+ SM-G975F Galaxy Watch pairing issue with Magisk
Hello, I am curious to see if anyone else had or still has this issue and if there is a fix for it. Devices involved: Phone - Samsung Galaxy S10 Plus (SM-G975F) Android Version: 10.0 Build Number G975FXXU4CTC9 Watch - Samsung Galaxy Watch 46mm...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi @dr.ketan
Thank you for this, I was able to get my watch connected on Rooted S21 Ultra 5G.
FdeKlerk said:
Hi @dr.ketan
Thank you for this, I was able to get my watch connected on Rooted S21 Ultra 5G.
Click to expand...
Click to collapse
I am having issues connecting my WearOs based Galaxy watch 4. Any way this is possible to fix?
I faced the same issue after rooting my Galaxy S21 Ultra (android 12)
I tried the solution that dr.ketan suggested in his post. After following the steps, my phone got stuck on the botting page and wouldn't turn on properly. So don't try what was suggested in the d.ketan's post if you are on a S21 Ultra (android 11 and 12). In fact, that solution was also mentioned in the original solution on github in which the author said:
"*Beware! /!\ Owners of the S21 series cannot use these commands (or you have to be SURE your vendor partition isn't read only or full) and must instead use the zip bellow to flash using TWRP. The commands below could brick your device /!*"
here's the github repository. you can read it if you want to.
GitHub - 3arthur6/BluetoothLibraryPatcher
Contribute to 3arthur6/BluetoothLibraryPatcher development by creating an account on GitHub.
github.com
anyways, here's the solution to fix galaxy watch not getting connected to Galaxy S21 Ultra (S21 series) after rooting the device.
after you rooted your device using odin and the patched magisk AP file,
1. install TWRP using this tutorial
[RECOVERY][UNOFFICIAL] TWRP for Galaxy S21 Ultra (Exynos)
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...
forum.xda-developers.com
2. Then download BluetoothLibraryPatcher_twrp_2.4.1.zip from this repo on GitHub and flash in in TWRP
Releases · 3arthur6/BluetoothLibraryPatcher
Contribute to 3arthur6/BluetoothLibraryPatcher development by creating an account on GitHub.
github.com
then reboot your device, now you should be able to connect your watch with no issue.
mohamadj2 said:
I faced the same issue after rooting my Galaxy S21 Ultra (android 12)
I tried the solution that dr.ketan suggested in his post. After following the steps, my phone got stuck on the botting page and wouldn't turn on properly. So don't try what was suggested in the d.ketan's post if you are on a S21 Ultra (android 11 and 12). In fact, that solution was also mentioned in the original solution on github in which the author said:
"*Beware! /!\ Owners of the S21 series cannot use these commands (or you have to be SURE your vendor partition isn't read only or full) and must instead use the zip bellow to flash using TWRP. The commands below could brick your device /!*"
here's the github repository. you can read it if you want to.
GitHub - 3arthur6/BluetoothLibraryPatcher
Contribute to 3arthur6/BluetoothLibraryPatcher development by creating an account on GitHub.
github.com
anyways, here's the solution to fix galaxy watch not getting connected to Galaxy S21 Ultra (S21 series) after rooting the device.
after you rooted your device using odin and the patched magisk AP file,
1. install TWRP using this tutorial
[RECOVERY][UNOFFICIAL] TWRP for Galaxy S21 Ultra (Exynos)
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...
forum.xda-developers.com
2. Then download BluetoothLibraryPatcher_twrp_2.4.1.zip from this repo on GitHub and flash in in TWRP
Releases · 3arthur6/BluetoothLibraryPatcher
Contribute to 3arthur6/BluetoothLibraryPatcher development by creating an account on GitHub.
github.com
then reboot your device, now you should be able to connect your watch with no issue.
Click to expand...
Click to collapse
Thanks, Do you have any fix or a link to fix S-Health not opening up ?
JazonX said:
Thanks, Do you have any fix or a link to fix S-Health not opening up ?
Click to expand...
Click to collapse
[RESTRICTIONS-REMOVED] Samsung Health Monitor - WearOS - 1.1.3.002 - Root, Age, Country & Device Restriction Removed - 23rd May 2023
Hello Everyone, I hope you all are fine... ~~~ WearOS WATCHES ONLY ~~~ ~~~ FEATURES, BUGS & FUTURE WORKS~~~ FEATURES: Works on Samsung Watch4 and Watch5 (as mentioned Samsung WearOS Watches), Multilanguage, no root detection, no country...
forum.xda-developers.com
shaharofir said:
[RESTRICTIONS-REMOVED] Samsung Health Monitor - WearOS - 1.1.3.002 - Root, Age, Country & Device Restriction Removed - 23rd May 2023
Hello Everyone, I hope you all are fine... ~~~ WearOS WATCHES ONLY ~~~ ~~~ FEATURES, BUGS & FUTURE WORKS~~~ FEATURES: Works on Samsung Watch4 and Watch5 (as mentioned Samsung WearOS Watches), Multilanguage, no root detection, no country...
forum.xda-developers.com
Click to expand...
Click to collapse
Isn't this for S-Health Monitor and enabling BP / ECG modes ?
Anyway to get S-Health working ?
Oh, I just understood what you meant.
This magisk module worked for me:
Release 1.1: Update install.sh · stylemessiah/SamsungHealthSecurityProps
Added some more error checking, notably (bold = new additions): Module install will ONLY proceed now if : /vendor/build.prop file is found BOTH ro.security.keystore.keytype key and sakv2 value are...
github.com
shaharofir said:
Oh, I just understood what you meant.
This magisk module worked for me:
Release 1.1: Update install.sh · stylemessiah/SamsungHealthSecurityProps
Added some more error checking, notably (bold = new additions): Module install will ONLY proceed now if : /vendor/build.prop file is found BOTH ro.security.keystore.keytype key and sakv2 value are...
github.com
Click to expand...
Click to collapse
Thanks a lot! Worked perfectly fine
Gear Pairing is still a mess though as my System/ Vendor is not R/W.
Any clue ?
I'm trying to figure out how to root a Samsung s20 fe 5g and need a tutorial on how to do so.!! Please help? I'm new to this!
two choices, either go to the roms kernels and recoveries section and install TWRP then flash magisk in TWRP. read thru at least half the TWRP thread first. it'll help you out in learning from other people's experience. if not that then google ''topjohnwu github magisk instructions.'' there are at least 4 or 5 threads here discussing magisk too.
i just want to ask how to root my galaxy s21 ultra.im afraid to follow some tutorials in youtube because its all lowest android version.
thanks
It's same as A12
Read this magisk documentation - Samsung section. Just for your information, S22 doesn't require to select "Recovery Mode" option.