Spark Os
Sharing this awesome rom!
2.45 GB file on MEGA
mega.nz
-— Flashing Instructions ---
* download zip and place in same folder in fastboot.exe
* open command prompt inside same folder
* reboot phone to bootloader (adb reboot bootloader)
* fastboot -w (optional)
* fastboot update <rom.zip>
Thanks for sharing this Rom, Is it necessary to patch init.bot.img with this rom or is it already done? I saw in Pixelflasher app that you can flash a custom rom from the app, but I need to know if you have to patch the file.
Bestiole222 said:
Thanks for sharing this Rom, Is it necessary to patch init.bot.img with this rom or is it already done? I saw in Pixelflasher app that you can flash a custom rom from the app, but I need to know if you have to patch the file.
Click to expand...
Click to collapse
Read the instructions, just follow them.
Love this rom, battery is insane on wifi
thanks for sharing this amazing rom!
It would be cool to have Kirisakura kernel built in and 32 bits apps support and face id too!
I got an unlocked pixel 7 pro just for the sake of custom Roms. I like having more freedom. That's all. Not being tied to just stock.
flyinglotus said:
thanks for sharing this amazing rom!
It would be cool to have Kirisakura kernel built in and 32 bits apps support and face id too!
Click to expand...
Click to collapse
Dumb question: But is that possible ? To have 32 bits app support? I thought it was a hardware limitation
antonio_d25 said:
Dumb question: But is that possible ? To have 32 bits app support? I thought it was a hardware limitation
Click to expand...
Click to collapse
It's not a hardware limitation, it's purely software. Google stripped the 32-bit libraries from the ROM.
BTW, there's a thread for this ROM over in the Pixel 7 Pro section:
SparkOS 13.2 | Android 13 | [UNOFFICIAL] - [11/29/2022]
SparkOS is an AOSP based ROM, packed with many features without sacrificing stability and performance. In short a fully functional operating system as stable and customizable as it should be. /* Your warranty is now void. * * I am not...
forum.xda-developers.com
When I attempt to flash, it says the bootloader version cloudripper-1.0-9231809 is outdated and will only work if updated to cloudripper-1.0-9231810. I've tried searching all over and can't find out where to download it.
EtherealRemnant said:
It's not a hardware limitation, it's purely software. Google stripped the 32-bit libraries from the ROM.
Click to expand...
Click to collapse
Gotcha, thanks. Been looking but I haven't been able to find any ROMs or Kernels that offer 32-bit app support. Hopefully there will be one in the future
antonio_d25 said:
Gotcha, thanks. Been looking but I haven't been able to find any ROMs or Kernels that offer 32-bit app support. Hopefully there will be one in the future
Click to expand...
Click to collapse
Cherish OS, DerpFest or Corvus OS litteraly support 32 bits apps
flyinglotus said:
Cherish OS, DerpFest or Corvus OS litteraly support 32 bits apps
Click to expand...
Click to collapse
thanks !!! I will check them out
I also have the issue with:
When I attempt to flash, it says the bootloader version cloudripper-1.0-9231809 is outdated and will only work if updated to cloudripper-1.0-9231810.
Any help would be greatly appreciated.
Thanks!
For anyone interested, the newest version is RC1 for the Pixel 7.
Located here:
2.45 GB file on MEGA
mega.nz
Thanks for the update. I no longer have the cloudripper problem just a boot loop problem. Starts the booting process (the Spark animation starts) then it just goes black and reboots. I tried changing the active slots but that did not work. This is a brand new Pixel 7 phone. There are no issues loading google's stock rom. Any help or suggestions would be appreciated.
Thanks
Jack Swartz said:
Thanks for the update. I no longer have the cloudripper problem just a boot loop problem. Starts the booting process (the Spark animation starts) then it just goes black and reboots. I tried changing the active slots but that did not work. This is a brand new Pixel 7 phone. There are no issues loading google's stock rom. Any help or suggestions would be appreciated.
Thanks
Click to expand...
Click to collapse
Could be a bad download. Try download again, and perform same setup instructions.
Jack Swartz said:
Thanks for the update. I no longer have the cloudripper problem just a boot loop problem. Starts the booting process (the Spark animation starts) then it just goes black and reboots. I tried changing the active slots but that did not work. This is a brand new Pixel 7 phone. There are no issues loading google's stock rom. Any help or suggestions would be appreciated.
Thanks
Click to expand...
Click to collapse
I'm pretty sure it's because you're on the December update. Spark hasn't been updated for the December update just yet, it's still on the November update.
Misuto said:
I'm pretty sure it's because you're on the December update. Spark hasn't been updated for the December update just yet, it's still on the November update.
Click to expand...
Click to collapse
Thanks for the help. That did the trick!
I have a test build of bliss for pixel 7 (panther). If anybody is interested in testing. I built the p7pro rom we have now
omariscal1019 said:
I have a test build of bliss for pixel 7 (panther). If anybody is interested in testing. I built the p7pro rom we have now
Click to expand...
Click to collapse
I would absolutely love any test build you have for the 7. I just don't have the 7 pro.
Related
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void. Knox 0x1.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
WARNING:
If you find any bugs, bring a logcat. Logs are helpful....
If your problem cannot be reproduced without using Root modules or Xposed, don't report it! The same goes with custom kernels.
Not working:
Camera or Video recording
Encryption not working in TWRP
Data
Prerequisites:
The latest version of TWRP. This is an absolute requirement.
Your device (it better be a Galaxy Tab 3 7.0 (Sprint)).
How to flash this ROM:
So you really want to do this, huh? That must mean you accept the risks specified in the disclaimer, and that you read the warning.
From other custom ROMs (this assumes you already unlocked your bootloader a long time ago):
Download the zip file for your device (link is below).
Reboot into TWRP (Volume Up + Home + Power or Advanced Restart).
Make a backup (optional).
Perform a factory reset (Wipe > Swipe to Factory Reset).
Flash the ROM you just downloaded.
Flash OpenGApps for Android 8.1 if you want Google services (optional).
If you want root, flash Magisk or SuperSU
Reboot and proceed normally with installation.
Download links:
TWRP:https://drive.google.com/open?id=1SobBqwJ4blOBUwJRQhRbSngqli-GQOd4
Rom: https://drive.google.com/open?id=1-KmqmWPjX1CcS31llPttYkJkG61uY7zC
OpenGApps 8.1: https://drive.google.com/open?id=1te8P364JcVnlItY-r74a8CbkP4jAj85Q
Source code:
LineageOS on GitHub
Credits:
The LineageOS Team
TeamWIn
Special Thanks: @DarkFrenzy @captainthrowback @Dees_Troy @noahajac @LuK1337
Anyone i forgot to mention
Very Special Thanks: @arco as alot of my changes are based upon his Github upstream changes on serranoltexx, expecially on RIL. Without this project would not be possible.
Version Information:
ROM OS Version: Android 8.1 Oreo
Kernel Version: Linux 3.4.x
Sent from my SM-T217S using Tapatalk
IThinkALot said:
Android Oreo on a 5 year old device? You're awesome dude.
Sent from my Xiaomi Redmi Note 4 using XDA Labs
Click to expand...
Click to collapse
Thanks. Haha it wasn't a easy task. Took me about 2 months of tinkering and playing with it. I am personally using the device at the moment.
Sent from my SM-T217S using Tapatalk
slashez said:
That’s so impressive. I don’t want to sound unappreciative but can you please do it for the tab 3 8.0. [emoji1391]*[emoji1391]*[emoji1391]*[emoji1391]*
Click to expand...
Click to collapse
Thanks. Problem with that is I don't have the device on hand, so that's problematic in building and testing.
Sent from my SM-T217S using Tapatalk
sscsps said:
Wow dude! Awesome work!
---------- Post added at 08:40 AM ---------- Previous post was at 08:40 AM ----------
When will you be sharing your trees?
Click to expand...
Click to collapse
Thanks. Ya I was going to try to get the camera working before I dropped my self made trees.
majorkid said:
Thanks for the ROM ..
Click to expand...
Click to collapse
Welcome
The0919 said:
Can I flash this on my T210R Tab 3?
Click to expand...
Click to collapse
Different hardware
wtjra70 said:
You sir has restored my love in this little bugger the SM-217S. I found it a couple of months back hiding in a drawer. I figured I'd use it when I'm watching YouTube in bed. I've been on Resurrection Remix 7.1 and could believe it was so slow. Now this thing is has new life in it again.
Click to expand...
Click to collapse
Welcome.
Robsr said:
since i.m no technician or a computer whizkid i.ve to look up on these kind of threads for a good rom
so i dare asking you if you are willing to make a rom for a Samsung Tab 3 lite SM-T110. My wife uses this and its very, very slow on the stock rom.
thnx a lot
rob
out of the Hague Netherlands.
Click to expand...
Click to collapse
Problem is different hardware. And I don't have that tab on hand to debug issues.
Sent from my SM-T217S using Tapatalk
Thank you for cooking this ROM and interest in making the camera work. I know you use it as WiFi tablet only. I still can't get Sprint data working as was the case with earlier serranoltexx-based builds.
Looking forward to any updates you may provide. Best wishes...
Version Information:
ROM OS Version: Android 8.1 Oreo
Kernel Version: Linux 3.4.x
Click to expand...
Click to collapse
residentorca said:
Thank you for cooking this ROM and interest in making the camera work. I know you use it as WiFi tablet only. I still can't get Sprint data working as was the case with earlier serranoltexx-based builds.
Looking forward to any updates you may provide. Best wishes...
Click to expand...
Click to collapse
Can you take some logs when you insert your sim, and try to toggle data?
lazumo said:
I'm guessing a kernel for Lineage OS 15.1 wouldn't work with Lineage OS 14.1 ? I'm not ready to make the leap onto Oreo yet, but I'll be damned if I can find a good, non-stock kernel for LOS 14.1 on my SM-T217S. I've tried repeatedly to compile my own from all the sources that are readily available, but the OS just hangs saying that Lineage OS is starting... and that's just the stock source with the specific commits for this device. I can't figure out if it's the toolchain I'm using or what.
Thanks for the time and effort that you've put into this, though. Having begun to try to do this kind of thing myself has really given me a new appreciation for the work that you and other XDA members do. Hopefully one day I'll be compiling my own ROM builds for y'all too.
Click to expand...
Click to collapse
Kernel source compiles based upon device. The kernel from 14.1 or 15.1 should be interchangeable. If the ROM boots to the initial screen then its probably not a kernel issues but another issue why it won't boot. You have to take a adb log and look at the output to determine why its hanging.
residentorca said:
With SIM inserted I see a persistent notification atop the notification panel that says No SIM card - No service. When I remove and re-insert the SIM, the message remains. Because of this I am unable to toggle cellular data on and off using the status bar Mobile data switch or in Settings-Mobile Network. All items are greyed out under Settings-Mobile Network. When I access the "Testing" menu by dialing *#*#4636#*#* and then select Tablet Info I am unable to Enable Data Connection. I recall that after the first boot after flashing your ROM the Cellular setup wizard never started even after removing and reinserting the SIM card. I don't think this is relevant but I did not flash any GAPPS package. I did flash the file 2016.02.08 Freedompop_APNs_fix.zip which I obtained from a different thread and has worked on other ROMs. My SIM is for FreedomPop which uses the Sprint data network. I did collect logcat and Bug Report files to share with you if you think they may help. Let me know if I may provide any additional information. Thanks!
Click to expand...
Click to collapse
Thanks I will take a look at the logs. Ya I don't have a sim to insert maybe I can find a friend who has a old one lying around. Did the sim show inserted on my previous build?
residentorca said:
Thanks, the SIM did not show on the previous build either.
Click to expand...
Click to collapse
OK cool. I will work on getting that sorted. Wish I knew that before lol. Currently trying to get the camera to work. Thanks though.
I have this exact tablet version, but does this work for serranolte?
Nice job on the rom too bad i dont have the right device model to test but anyways its awesome to see development for samsung tablets especially oreo
TurnaboutSavage said:
I have this exact tablet version, but does this work for serranolte?
Click to expand...
Click to collapse
It might work if you flashed a custom kernel but the blobs are slightly different so idk the answer. It would be up to you, I can't provide support as I don't have that device.
JT1510365 said:
Nice job on the rom too bad i dont have the right device model to test but anyways its awesome to see development for samsung tablets especially oreo
Click to expand...
Click to collapse
Thanks, I figured I would give it a try, this is my first build for this device specific.
Can i flash this on T210??
Voyage Maker said:
Can i flash this on T210??
Click to expand...
Click to collapse
Different hardware.
Sent from my SM-T217S using Tapatalk
residentorca said:
Thanks, the SIM did not show on the previous build either.
Click to expand...
Click to collapse
So I been looking at the radio files I used. I am thinking they would work. But they were made for a different device but do work with serranotexx which I assumed would be work with this device. Obviously I believe this is the issue, I will try to do a rebuild semi soon to see if I can sort that out. The hardware is slightly different between the s4 and this.
Sent from my SM-T217S using Tapatalk
Does the Rom work on sm t110?
user325 said:
Does the Rom work on sm t110?
Click to expand...
Click to collapse
Different hardware.
Sent from my SM-T217S using Tapatalk
Not Working
It's not working for me, I'm on the Samsung galaxy tab SM-T217S (Sprint). When I try to flash it with TWRP, it says:
Installing zip file
Checking for MD5 file...
Skipping MD5 check: No MD5 file found
Warning: No file contexts
E3004: This package is for device: lt02lte, lt02ltespr, lt02ltetmo; this device is .
Updator process ended with ERROR: 7
Error installing zip file
Updating partition details. . .
. . .done
Edit: FIXED, I edited the file and removed the version verification.
Justsnoopy30 said:
It's not working for me, I'm on the Samsung galaxy tab SM-T217S (Sprint). When I try to flash it with TWRP, it says:
Installing zip file
Checking for MD5 file...
Skipping MD5 check: No MD5 file found
Warning: No file contexts
E3004: This package is for device: lt02lte, lt02ltespr, lt02ltetmo; this device is .
Updator process ended with ERROR: 7
Error installing zip file
Updating partition details. . .
. . .done
Am I doing something wrong?
Click to expand...
Click to collapse
Reread the first page. Latest version of twrp is an absolute requirement.
Woodbuger said:
Reread the first page. Latest version of twrp is an absolute requirement.
Click to expand...
Click to collapse
I was on the latest version of TWRP.
Mod Edit : Link Removed.
Issues :
Issues you report; daily drivers working!!
Fixed :
None yet
Builds :
Build 1 : 21/01/2019 (testing)
Announcements :
Build 1 21/01/2019 : LineageOs-v16.0 [Build 1] uploaded.
Please report bugs if found any.
Click to expand...
Click to collapse
A small amount of token would be appreciated as an encouragement.
Click to expand...
Click to collapse
Please Hit Thanks if you found this useful. It costs nothing.
Click to expand...
Click to collapse
You can buy me a Coffee at my PayPal, if you found this helpful.
Click to expand...
Click to collapse
Ui is laggy
hi, thanks for this rom, installed on A510F successfully.
ui is a little laggy but the rom is usable everyday
This ROM can run on A710, and it works fine. I used your files on GitHub to fix bugs, and now it works perfect.:good: Thank you bunnyy
Hi Bunny,
Congratulations for this first version!
You did a great job.
In fact I have not found any triple crashes, any kind of problems with third-party apps, no spontaneous reboot, no jamming and / or blocking.
Obviously there is still work on the front of the optimization, in fact the UI laggy in practically every sector, consumption is as anomalous (even if they are not bad to be the first version) and the recharge has problems of overheating, in addition to do not indicate if it is a fast or slow charge
I hope you will continue to develop and that every month you will update the security patches, and maybe one day you will also grow into making it a LOS Official (as it was for dotOS).
hi
bunny the rom is very good .but only one request
please add indian volte file ..
On stock geekbench multi core score is 3600
On this rom or any other,multi core
score is very smaller And this is 1600
Please repair optimilazation
Sorry for my bad english ?
Thanks
rusiu559 said:
On stock geekbench multi core score is 3600
On this rom or any other,multi core
score is very smaller And this is 1600
Please repair optimilazation
Sorry for my bad english ?
Click to expand...
Click to collapse
Try this,. This one is for A710, you need flash A510 boot.img and modify the device information.
https://mega.nz/#!Lchmla7C!nLfT--xu9aK1BlJLBNrbX-G9OwUNaBTVtkflS2HE_EE
When a new build comes out, can I just flash the new build over the old build without wiping everything? (TLDR= Dirty Flash Update/New Build?)
Installed yesterday on french A510F.
No problem until now except in configuration wizard if I choose to configure via data instead of WiFi.
Thank you!
Can't find a way to root in order to restore my Titanium backups, is there a way that works? (I've tried these zip: SuperSu v2.82, addonsu arm 16.0 unofficial, magisk v18.0)
Great man! All the best hope you make it stable soon
This ROM on A710FD?
I am bit confused. Is this ROM can be installed on A710FD? Are the partitions of A5 and A7 same?
DF11GB said:
This ROM can run on A710, and it works fine. I used your files on GitHub to fix bugs, and now it works perfect.:good: Thank you bunnyy
Click to expand...
Click to collapse
darenhoff said:
I am bit confused. Is this ROM can be installed on A710FD? Are the partitions of A5 and A7 same?
Click to expand...
Click to collapse
Yes, it can be installed on all a710 devices ,and I'm trying to port it for a7108 and a5108. I can tell you how to install it on a710, but can't give you the zip. Because some files are from GitHub. The partitions of a510 and a710 are totally the same, except a5108 and a7108.
Really looks good idea
Hi! Can you please elaborate a bit.
The link you have provided (filename probably in chineese) is a boot image.
So, on my A7 (2016), after TWRP(which my device already has), this boot image is to be flashed - is that right? Or ROM is to be flashed then reflash this boot image? and then gapps?
Are you using this device and ROM? I am worried because not a single ROM based on 8.1 for this device is working 100%. Every ROM has its own problems and benefits.
Thanks and Regards
Any developer, if can confirm above, please.
DF11GB said:
Try this,. This one is for A710, you need flash A510 boot.img and modify the device information.
https://mega.nz/#!Lchmla7C!nLfT--xu9aK1BlJLBNrbX-G9OwUNaBTVtkflS2HE_EE
Click to expand...
Click to collapse
darenhoff said:
Hi! Can you please elaborate a bit.
The link you have provided (filename probably in chineese) is a boot image.
So, on my A7 (2016), after TWRP(which my device already has), this boot image is to be flashed - is that right? Or ROM is to be flashed then reflash this boot image? and then gapps?
Are you using this device and ROM? I am worried because not a single ROM based on 8.1 for this device is working 100%. Every ROM has its own problems and benefits.
Thanks and Regards
Any developer, if can confirm above, please.
Click to expand...
Click to collapse
You can flash this zip any time. Before flash this one, you need flash the ROM, and then flash the vendor of a710 (You can find it on bunnyy's GitHub). Without doing that, you can't use camera.
I have a a710k, and I'm using this ROM.
@bunnyy: are you following this
This thread is for A5 devices, so I hope your uploades are for A5 (2016). But somebody saying it can be flashed on A7 (2016).
Is it correct? OR it may brick a7
bunnyy said:
Issues :
Issues you report; daily drivers working!!
Fixed :
None yet
Builds :
Build 1 : 21/01/2019 (testing)
Announcements :
Build 1 21/01/2019 : LineageOs-v16.0 [Build 1] uploaded.
Click to expand...
Click to collapse
Work ota update ?
DF11GB said:
You can flash this zip any time. Before flash this one, you need flash the ROM, and then flash the vendor of a710 (You can find it on bunnyy's GitHub). Without doing that, you can't use camera.
I have a a710k, and I'm using this ROM.
Click to expand...
Click to collapse
You said you installed this on A7 2016 device, does it run smoothly with no problems? Can you share us the step by step procedure? Will it also be installed on my A710Y device?Thanks
Disclaimer:
THIS IS NOT ANDROID! Android apps(.apk) do not work here, no Play Store!
Use this at your own risk. I'm not responsible for any problem.
Prerequisites:
Installed TWRP recovery
Downloaded CyanogenMod 13 and SailfishOS zip files from below
The basic linux & android knowledge
Patience
Installation:
Copy downloaded CyanogenMod and SailfishOS zips to device
Reboot to recovery
(of course)Make a nandroid backup
Wipes
Flash CyanogenMod zip
Flash Sailfish OS zip
Reboot (First boot will take long time to show UI, it took around 6 minutes for me)
Downloads:
SailfishOS (espresso3g)
SailfishOS (espressowifi)
CyanogenMod 13 (espresso3g by Andi)
CyanogenMod 13 (espressowifi by Andi)
What Works
Display
Touch
WiFi
Audio/Video
What Doesn't Work
Bluetooth
Terminal app crashes when opened from device, you can use ssh from your computer to access the terminal.
Power Off (we need to power off from twrp)
You tell!
Optional
Get Storeman for more apps. You need to enable in Settings/Developer Tools/Remote Connection. To install download harbour-storeman 0.2.3-1.sfos3_.4.armv7hl.rpm from the link, copy it to the device using ssh (tab should be connected via usb/wifi to the computer) and run
Code:
scp /path/to/downloaded/storeman [email protected]:/home/defaultuser
Password is what is set in Settings/Developer Tools/Remote Connection. Then run
Code:
ssh [email protected]
and in that run
Code:
devel-su pkcon refresh install
devel-su pkcon install-local path-to-storeman-rpm
, same password as in Settings/Developer Tools/Remote Connection. From there you can install more apps! (There is Jolla App Store built in but this has more apps)
Source Code:
mer-hybris https://github.com/mer-hybris
espressowifi device tree https://github.com/MightyM17/android_device_samsung_espressowifi
espresso3g device tree https://github.com/CyanogenMod/android_device_samsung_espresso3g
kernel https://github.com/MightyM17/android_kernel_samsung_espresso10
device
https://github.com/MightyM17/droid-hal-espresso3g
https://github.com/MightyM17/droid-config-espresso3g
https://github.com/MightyM17/droid-hal-version-espresso3g
Sailfish OS Version: 3.4.0.24
ROM Base OS Version: CyanogenMod 13
ROM Kernel: Linux 3.0.101
For espressowifi users facing issue with touch
Fix In SailfishOS
Could you try commenting out a part in a file `sparse/var/lib/environment/compositor/droid-hal-device.conf` that is add # before
QT_QPA_EVDEV_TOUCHSCREEN_PARAMETERS="/dev/input/event0:rotate=270"
OR
Fix in twrp
The location of the file in twrp will be in /data/.stowaways, add # before
QT_QPA_EVDEV_TOUCHSCREEN_PARAMETERS="/dev/input/event0:rotate=270" in the file `sparse/var/lib/environment/compositor/droid-hal-device.conf
Mithil17 said:
Hey I just ported sfos to the tab 2 using cm13 base!
How's it?
What Works
Display
Touch
WiFi
Mostly everything (Needs to be tested a lot)
What Doesn't Work
Bluetooth
Browser (kinda laggy)
More to be tested!
Click to expand...
Click to collapse
Where’s the link to test?
HippoInWindow said:
Where’s the link to test?
Click to expand...
Click to collapse
Right now i am testing it with @aat56 if all works well will release download link in few days
How does it run, performance wise? It´s my kid´s device and Lineage is a bit laggy on it.
Mithil17 said:
Right now i am testing it with @aat56 if all works well will release download link in few days
Click to expand...
Click to collapse
Okay, waiting patiently. I would like to test a totally new OS other than mainstream custom ROMs.
zackwire said:
How does it run, performance wise? It´s my kid´s device and Lineage is a bit laggy on it.
Click to expand...
Click to collapse
Firstly this isnt Android so dont expect android apps will work otherwise it is pretty smooth, issues i'm facing are browser having touch issues, Bluetooth not working and USB issues, havent tested camera yet bluetooth will be an easy fix i hope. Other things like Jolla Store, Gallery, WiFi etc work. And about Modem (calls/sms/mobile network) i have no way to check as providers have switched to 4G while the tab has 3G
I will try to run some benchmarks if possible
HippoInWindow said:
Okay, waiting patiently. I would like to test a totally new OS other than mainstream custom ROMs.
Click to expand...
Click to collapse
Well i wont be able to work more on it due to time issue. There are some issues like usb,bluetooth etc. do you still want me to release it?
Mithil17 said:
Well i wont be able to work more on it due to time issue. There are some issues like usb,bluetooth etc. do you still want me to release it?
Click to expand...
Click to collapse
Would like to test, since mine is already dedicated to testing
HippoInWindow said:
Would like to test, since mine is already dedicated to testing
Click to expand...
Click to collapse
What device? 7 or 10 inch?
Mithil17 said:
What device? 7 or 10 inch?
Click to expand...
Click to collapse
10 inch (espressowifi). Is the build unified?
HippoInWindow said:
10 inch (espressowifi). Is the build unified?
Click to expand...
Click to collapse
I don't know xD, I have built for espresso3g and espressowifi but both were 7 inch models
Mithil17 said:
I don't know xD, I have built for espresso3g and espressowifi but both were 7 inch models
Click to expand...
Click to collapse
Can tell, but not sure how it will work, I can test for you and I will make sure to backup my current ROM (CyanogenMod 9, for nostalgia) before testing, hope this doesn’t brick my recovery XD
HippoInWindow said:
Can tell, but not sure how it will work, I can test for you and I will make sure to backup my current ROM (CyanogenMod 9, for nostalgia) before testing, hope this doesn’t brick my recovery XD
Click to expand...
Click to collapse
Well it's at your own risk! This is actually my 1st ever port so I'm very nervous
HippoInWindow said:
Can tell, but not sure how it will work, I can test for you and I will make sure to backup my current ROM (CyanogenMod 9, for nostalgia) before testing, hope this doesn’t brick my recovery XD
Click to expand...
Click to collapse
It didnt brick recovery in mine plus i kinda actually like it (only issue being no android app support)
Want me to upload?
Oh wow! you actually made a new ROM for the samsung galaxy tab 2! I am definitely gone help out by installing this and mentioning any bugs I find! Also I can't wait to see newer android versions!
KappaTheCapper said:
Oh wow! you actually made a new ROM for the samsung galaxy tab 2! I am definitely gone help out by installing this and mentioning any bugs I find! Also I can't wait to see newer android versions!
Click to expand...
Click to collapse
Newer android versions, I tried building Oreo but without success
Also this isn't android it's sailfish os
Mithil17 said:
Newer android versions, I tried building Oreo but without success
Also this isn't android it's sailfish os
Click to expand...
Click to collapse
That is linux reminding everyone.
Final build will have bluetooth intergrated?
PixelExperience for OnePlus 6 [Enchilada]
What is this?
PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 11
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FM radio
Fingerprint reader
Face unlock
NFC
Lights
Sound/vibration
Known issues
Wi-Fi Display
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from PixelExperience website
Donate
Liked my work? Give me a beer
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 11.0.0_r37
Security patch level: May 2021
Build author/Device Maintainer: SevralT
Device Source code: https://github.com/SevralT
Kernel Source code: https://github.com/LineageOS/android_kernel_oneplus_sdm845
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
Ah, nice. Thanks OP for the builds, and also thanks to @zahidm for providing us with unofficial PE up until this point!
I noticed that the downloads page offered a special PE recovery image? I was curious and looked and the instructions and they seemed different than the usual "flash using TWRP" that most ROMs use. Do we have to follow the steps on the website?
adeklipse said:
Ah, nice. Thanks OP for the builds, and also thanks to @zahidm for providing us with unofficial PE up until this point!
I noticed that the downloads page offered a special PE recovery image? I was curious and looked and the instructions and they seemed different than the usual "flash using TWRP" that most ROMs use. Do we have to follow the steps on the website?
Click to expand...
Click to collapse
Flash this rom like you flashing other roms. All roms installing same
Will future updates overwrite twrp with pe recovery? will it be compatible with twrp?
jonathanrajya3 said:
Will future updates overwrite twrp with pe recovery? will it be compatible with twrp?
Click to expand...
Click to collapse
Yes, TWRP will be replaced by PE recovery.
vikash1994b said:
Yes, TWRP will be replaced by PE recovery.
Click to expand...
Click to collapse
Ok, I tried flashing with PE recovery and it said "Package is for product OnePlus6 but expected enchilada", I followed the instructions on PE website
I'm wondering what's the difference between regular edition and plus edition?
and what about battery life, is there anyone tried it? please give a review.
Actually I'm on Pixel Experience Plus "unofficial" from the Cross Device Development section.
Do this Official version start from that build? Or it's a completely new project? I mean will I find everything working well with the same "plus" customizations? Thanks
jonathanrajya3 said:
Ok, I tried flashing with PE recovery and it said "Package is for product OnePlus6 but expected enchilada", I followed the instructions on PE website
Click to expand...
Click to collapse
You need to use LOS recovery or TWRP. If I will drop codename overiding, anyone will can't flash PE via twrp.
SevralT said:
You need to use LOS recovery or TWRP. If I will drop codename overiding, anyone will can't flash PE via twrp.
Click to expand...
Click to collapse
Oh ok, I installed the rom by temporarily flashing twrp, will install it permanently then. And another thing is I'm not able to sideload apks when I try to install it shows installing and nothing shows up, but I'm able to install it through adb install,
rana2hin said:
I'm wondering what's the difference between regular edition and plus edition?
and what about battery life, is there anyone tried it? please give a review.
Click to expand...
Click to collapse
I still haven't tried plus edition yet but battery life will give you around 5-6hrs on full charge (normal usage) device is used for more than 2yr
Harsh Kemali said:
I still haven't tried plus edition yet but battery life will give you around 5-6hrs on full charge (normal usage) device is used for more than 2yr
Click to expand...
Click to collapse
thank you for reply, try plus edition and give us a review
I'm currently on Palladium OS, battery life is 7+ hours.
If you rooted your Android device, change your device model to Pixel you'll get unlimited photos & video uploads on Google Photos for lifetime at ORIGINAL quality.
Does any one know how to change Device Model on Op6, i have rooted but cant see model in Build.prop
Does this support customizable vibration intensity like the unofficial version?
@ipha There's no options such as vibrations settings (I have this ROM), but if I'm correct you can do it via Kernel manager (Not sure..) it's a LOS Kernel so I think that's possible.
Note 100% sure about that.
Anyone not able to install apks? I'm not able to but working through adb install
Guys, is it just me or are the device-specific settings missing in this ROM (I installed PE+)?
robertototaro said:
Guys, is it just me or are the device-specific settings missing in this ROM (I installed PE+)?
Click to expand...
Click to collapse
No, same here. I noticed in the previous unofficial builts already, that those only show up after a while. I hope it's going to be the same here...
Is anybody able to move the volume menu over to the left? Its really bugging me being on the right side. Other than that, the rom is great so far.
Indianb0y018 said:
Is anybody able to move the volume menu over to the left? Its really bugging me being on the right side. Other than that, the rom is great so far.
Click to expand...
Click to collapse
You can't! Not on Pixel Experience. It might become available on PE+ but not on normal PE
deleted
deleted
Reserved #1
Reserved #2
Finally, a LineageOS 19.1 without Gapps pre-installed. Kinda sad that the other los has gms built-in while the other one stopped development. But this one looks promising as it sticks to the original Lineage experience.
Some questions that I would like to have clarification before testing this ROM:
1. ROM is using Aryan Tress right? Means it does also support ANX v204?
2. Signature spoofing present in the ROM?
3. Is OTA available?
4. Will it support erofs and f2fs compression in future build?
5. Is NTFS file format for OTG and SD Card readable? (Some roms can't read my ntfs SD card which I use for backups/ROM changing)
agree with @BigChungus321 , finally a vanilla build.
Can you please tell me the difference between vantom kernel and the default?
Also are you planning to make this official?
Edit: Is this using oss vendor?
Thank you!
Stan m said:
agree with @BigChungus321 , finally a vanilla build.
Can you please tell me the difference between vantom kernel and the default?
Also are you planning to make this official?
Edit: Is this using oss vendor?
Thank you!
Click to expand...
Click to collapse
This is an oss vendor rom since the flashing instruction only says latest miui 13 firmware plus the download size for the file is 1GB+. If it is miui vendor then it should be less.
BigChungus321 said:
This is an oss vendor rom since the flashing instruction only says latest miui 13 firmware plus the download size for the file is 1GB+. If it is miui vendor then it should be less.
Click to expand...
Click to collapse
Okay thanks! Why the miui firmware though? I moved from arrow os 11 to 12 without flashing any firmware or anything else...
BigChungus321 said:
Finally, a LineageOS 19.1 without Gapps pre-installed. Kinda sad that the other los has gms built-in while the other one stopped development. But this one looks promising as it sticks to the original Lineage experience.
Some questions that I would like to have clarification before testing this ROM:
1. ROM is using Aryan Tress right? Means it does also support ANX v204?
2. Signature spoofing present in the ROM?
3. Is OTA available?
4. Will it support erofs and f2fs compression in future build?
5. Is NTFS file format for OTG and SD Card readable? (Some roms can't read my ntfs SD card which I use for backups/ROM changing)
Click to expand...
Click to collapse
to
1. its Aryan Tress yes anx should work i dont use it i use gcam
2. no since this is no linage feature like i said its a clean los build i dont modify anything
3. not yet i can add it if needed
4. erofs no since los trees if they add support for it i can switch to it f2fs is already look at github i only revertet erofs related changes
5. should work but im not really sure dont have sdcard in ntfs
Stan m said:
Okay thanks! Why the miui firmware though? I moved from arrow os 11 to 12 without flashing any firmware or anything else...
Click to expand...
Click to collapse
its oss yes you can flash firmware its not a must its just to keep everything up2date if you already on last firmware its not needed (comming from miui or already flashed from other oss rom)
_JaSoN_ said:
to
1. its Aryan Tress yes anx should work i dont use it i use gcam
2. no since this is no linage feature like i said its a clean los build i dont modify anything
3. not yet i can add it if needed
4. erofs no since los trees if they add support for it i can switch to it f2fs is already look at github i only revertet erofs related changes
5. should work but im not really sure dont have sdcard in ntfs
Click to expand...
Click to collapse
Tysm!
Signature spoof is not really a big problem since there's a workaround for microg without signature spoof. Also thank goodness no erofs, I kinda like having system as r/w. OTA not a problem as well, would be cool though for a TG channel as a way to get notified on updates in the meantime. For anx and ntfs, welp I hope it works since I personally prefer stock camera images and use my SD card to restore backups.
I'm definitely going to give this rom a shot when I get bored of my current ROM.
_JaSoN_ said:
its oss yes you can flash firmware its not a must its just to keep everything up2date if you already on last firmware its not needed (comming from miui or already flashed from other oss rom)
Click to expand...
Click to collapse
Stan m said:
Can you please tell me the difference between vantom kernel and the default?
Also are you planning to make this official?
Click to expand...
Click to collapse
What about this?
Thank you.
Stan m said:
What about this?
Thank you.
Click to expand...
Click to collapse
are you talking about stock miui kernel ? look here https://forum.xda-developers.com/t/...leepy-yuki-delta-and-doraemon-kernel.4398423/ basicly is just upstreamed and added a few features look github or look the linked thread for changes i cant write them all
_JaSoN_ said:
are you talking about stock miui kernel ? look here https://forum.xda-developers.com/t/...leepy-yuki-delta-and-doraemon-kernel.4398423/ basicly is just upstreamed and added a few features look github or look the linked thread for changes i cant write them all
Click to expand...
Click to collapse
So that means this build will never be official? Because i think lineage requires stock kernel
Stan m said:
So that means this build will never be official? Because i think lineage requires stock kernel
Click to expand...
Click to collapse
LineageOS doesn't require the stock kernel. You can't go official with the current device sources (as they are right now anyway) as LineageOS already has a different sm6150-common tree.
Aryannn999 said:
LineageOS doesn't require the stock kernel. You can't go official with the current device sources (as they are right now anyway) as LineageOS already has a different sm6150-common tree.
Click to expand...
Click to collapse
so why not use that?
Anyone using this rom want to share their opinion?
Stan m said:
Anyone using this rom want to share their opinion?
Click to expand...
Click to collapse
I'm using it for about 2 weeks... very good in my opinion, battery friendly no draining, charging fast... the alarm can wakeup phone from power off state...
Hellera said:
I'm using it for about 2 weeks... very good in my opinion, battery friendly no draining, charging fast... the alarm can wakeup phone from power off state...
Click to expand...
Click to collapse
Thanks for the reply! Btw how are you using it since 2 weeks? this was released just 5 days ago
...maybe I was confused because I'm using lineage too on another phone, Oneplus-6T... sorry about this!