update!!!! New build "aicp_clover_o-13.1-mordiford-20190129_043407.zip"
1. Download Base ROM-non-gsi AICP-mordiford (aicp_clover_o-13.1-mordiford-20181220_004447.zip)
https://cloud.akane.blue/nextcloud/s/PbGugWPefp9fFNZ?path=/clover
2. Download RR 7.0 GSI (system-190120-arm64-aonly-vanilla-nosu.img)
https://get.resurrectionremix.com/?dir=gsi
3. Download NanoDroid Stable v.20.5.1 https://forum.xda-developers.com/apps/magisk/module-nanomod-5-0-20170405-microg-t3584928
4. TWRP -https://mega.nz/#!qcA2BQIJ!xiBnnC0B4Z7fqpARbIY2ARdDY4hJLZgsriJsWaCCzNQ
============
Step
1. unlocked BootLoader
2. Boot TWRP and clean your ROM.
3. Flash BASE ROM (8.1 non-gsi AICP-mordiford)
4. Advanced wipe -Dalvik , Data , Cache , system
5. Flash System image ( RR 7.0 GSI )
6. Flash Open GAPPs (RM64-9.0-Nano)
***Fix Error 70 Gapps in TWRP
- go to Advanced Wipe
- select System partition
and click repair or change file system
- select Resize File System option
7. Reboot to system
Visite Dev
https://forum.xda-developers.com/mi-pad-4/development/rom-flokorom-9-0-t3901544
TWRP https://drive.google.com/file/d/1eNjbSsE3igYsvB4QIHjPGOcgV6RKZrnI/view
--------------------------------
Step
Wipe System, Data, Dalvik, Cache
Reboot recovery
Flash lastest Xiaomi Firmware (Clover)
https://github.com/XiaomiFirmwareUp...jKlFtxZa6wKy4bTGrLy5ptJJvfZy0d14c5fQlHypsZyLQ
Flash ROM
Boot System
-forceencrypt on /data
-support allow spoofing signature
Update 1 error " FBI message warning (lol) about the firmware and error 7"
---->Back to firmware v9.5.30
download it and install first
https://osdn.net/projects/xiaomifir...clover_miui_MIPAD4_9.5.30_4d4a04e318_8.1.zip/
--------------------------------------------------------------------------------------------
Update-2 -!!!! Cause Mokee TWRP not support (new GSI with Phh- :v114 ) decryption then You can't encrypt.
Use this step for new GSI with phh v114
1. Mokee TWRP v.3.3.1 --->TWRP-20190528-3.3.1.0-clover.img
https://share.weiyun.com/5VfERAy or https://mega.nz/#!QPgiDI6J!Urr3Drlwe...lp6UmBEb1v16pQ
2. Before firstboot from flashing must install Disable DM Verity ForceEncrypt
( https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_05.21.2019.zip)
Note After Mokee 9 Pie is updated to June 10th, the latest TWRP (TWRP-20190528-3.3.1.0-clover.img) cannot decrypt the data partition.
-----------------------------------------------------------------------------------------
Update-3
New installation.
0.Make F2FS Data Partition (Option)
1.Flash Firmware https://xiaomifirmwareupdater.com/#stable
2.Flash Vendor (mokee pie) https://mega.nz/#!JG4WxI7I!O4vr5eEcVXJUjbZ_jZBUE9Q9nDZ9tavRrT9JXDpql1Q
3.Flash System
4.Flash Disable DM Verity ( if you don't want encryption)
5.Reboot
-----------------------------------------------------------------------------------------
========================================================
Pre...
1. Download Latest Mokee TWRP 3.2.3_4 (not Twrp 3.3.1)
https://pan.baidu.com/s/1HgjIWw2WPd...rentPath=/sharelink3674761570-399175935519286
TWRP-20190117-3.2.3.0-4-clover.img
2. Download Base 9.x Treble supported ROM ( Mokee 9 nightly )
https://download.mokeedev.com/?device=clover
MK90.0-clover-2019-xx-xx-xxxx-NIGHTLY.zip
3. Download Android 9 Pie GSI ( system image file ) ----will make useful list later (after my finished testing)
General list here --- https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
How...
Base ROM supported ../Fingerprint /Forced Encryption / F2FS / Permissive mode SELinux
1. Clean Flash ROM (MK90.0-clover-2019-xx-xx-xxxx-NIGHTLY.zip)
do
1a [ Wipe--->Format Data ] + [ wipe---->Advanced wipe---->Dalvik/Data/Cache/System/Vendor ]
if not success please reboot into TWRP and try again.
1b reboot twrp
1c Flash Mokee ROM
Reboot system for setting up---->Note you can test any kernel supported in this step.
---------------Finished installation Treble Base ROM
2. Boot Recovery
2a wipe---->Advanced wipe---->Dalvik/Data/Cache/System/
2b change data partition to F2FS (if you want)----Option
2c install System.img GSI (ARM64_a only)
Reboot system
++ Gapps with Error 70
Solution-
1.Wipe---Advanced wipe----select (system menu) option-----Repair or change file system----Resize File System
2.Flash gapps again
++ Encrypted login
Setting---Fingerprint----setup (pattern /Password)
Note will effected with both Android and Twrp Login
-Remove Android Screen lock ----Twrp Login remove too
-Add Android Screen lock (Pattern/Password) ----Twrp Login add too
+++Magisk 19.3
-Recommended module
Viper4Android FX Legacy 4.3
Universal GMS Doze
SafetyPatch v3
...more
Picture my device " Unofficial Havoc 9x.GSI " quick charging
[9.0.0_r45/v115] download : https://androidfilehost.com/?a=show&w=files&flid=286761
Resurrection Remix v7.0 [GSI]
https://get.resurrectionremix.com/?dir=gsi
ARM64_A_20191205.img
Arrow OS (9x.GSI)
https://sourceforge.net/projects/arrow-os/files/arrow-9.x/GSI/
2019-04-18 extract file first ---- system_arm64_a.zip
Unofficial Omnirom (9x.GSI)
(05-06-2019 UPDATE)
https://forum.xda-developers.com/pr...abled-device-development/9-0-omnirom-t3901305
official Havoc 9x.GSI
https://forum.xda-developers.com/pr...bled-device-development/gsi-havoc-os-t3930030
##### Havoc-OS v2.7 Official Build #####
GSI Update 08-07-2019
Download ARM64-AONLY: https://bit.ly/2Xz2agy
Don't want F2FS data partition.
1.Flash Firmware
https://xiaomifirmwareupdater.com/#stable
2.Flash Vendor (mokee pie)
https://mega.nz/#!JG4WxI7I!O4vr5eEcVXJUjbZ_jZBUE9Q9nDZ9tavRrT9JXDpql1Q
3.Flash System
4.Flash Custom Boot Image (option)
5.Flash Magisk
6.Reboot
-forced encryption ( TWRP-20190117-3.2.3.0-4-clover.img support /data encrypt)
-No err from File App
-Setup your fingerprint
7.Flash Gapps
Pixel Dust PIE
https://forum.xda-developers.com/pr...evice-development/9-0-pixel-dust-pie-t3862484
system-arm64-aonly-20190326.img
Unofficial bootlegger 9x.GSI
https://forum.xda-developers.com/pr...d-device-development/9-0-bootleggers-t3919828
https://androidfilehost.com/?w=files&flid=292505
bootleggers-20190507-arm64-aonly-system.7z
unofficial LineageOS 16.0 GSI
https://sourceforge.net/projects/andyyan-gsi/files/
https://forum.xda-developers.com/pr...i-lineageos-16-0-gsi-arm64-ab-how-to-t3908029
!!!! Mokee TWRP not support (Phh- :v114 ) decryption.
[AOSP 9.0] Phh-Treble
Update
AOSP 9.0 v115
https://github.com/phhusson/treble_experimentations/releases/tag/v115
!!!! Mokee TWRP not support (Phh- :v114 ) decryption. (Important)
==================================================
New Descendant 3.0 GSI
https://forum.xda-developers.com/pr...om-rom-ver-t3840578/post79678283#post79678283
update
Phh-device tree version v115
https://github.com/Descendant/InOps...DotOne/Descendant_ThreeDotOne_arm64_aonly.zip
-----------------
My review
1.Base rom : MK90.0-clover-201906070721-NIGHTLY
2.Kernel: EAS_clover_kernel_V6.1
-------------------
Can't set wallpaper
...more
AOSPExtended Official GSI 9 Pie
https://sourceforge.net/projects/aospextended-rom/files/treble_gsi/pie_arm64_aonly/
update
AospExtended-v6.6-arm64_aonly-20190705-0000-OFFICIAL.zip
unofficial PixelExperienceP GSI
https://github.com/EnesSastim/Downloads/releases/
LiquidRemix
https://forum.xda-developers.com/pr...d-device-development/9-0-liquidremix-t3889160
ARM64-A-ONLY-NO GAPPS [2019-4-17 ]
https://drive.google.com/open?id=11e2RAumtcTZUyX8JBJLKgIn8H214Nmci
WARNING: THIS IS EXPERIMENTAL BETA MEANT FOR DEVELOPERS AND TESTERS NOT AS DAILY DRIVER
Caution: Android 11 builds are incompatible with Android 12. Beware!
Credits:
@Woomymy
@J6idot
@mastersenpai05
@myst33d
https://github.com/notmyst33d
Developers WoomyMy, J6idot , mastersenpai05 and Myst33d have helped develop an unofficial TWRP for rosemary - xiaomi redmi note 10s
Installation Video:
Code:
https://www.mediafire.com/file/f4zcls9sgi3nkoj/352+redmi+note+10s.rar/file
http://www.mediafire.com/file/p3zhivru97bdlke/no-verity-opt-encrypt-6.1.zip/file
https://github.com/RedmiNote10S/recovery_device_xiaomi_rosemary
Since this is not yet official, only proceed if you are competent enough and brave.
(If you need instructions on how to flash, please do not flash this with fastboot method)
Feel free to discuss any bugs or issues and fixes so that everybody can benefit from our findings.
TWRP 3.6+ Development Build status, fixes, bugs and downloads: [here]
TWRP -3.6.2_11-2
NameModifiedTWRP-3.6.2_11-208/03/2022
Changelog
Fix brightness when max brightness is 255
Render GUI at 60FPS
Reposition statusbar icons and remove top offset
A lot of code cleanup
Update TWRP sources
DONT INSTALL THIS ON MIUI 13
Install instructions
Without TWRP/OrangeFox
Note: You need a copy of your ROM boot.img
Click to expand...
Click to collapse
This device DOES NOT support fastboot boot twrp.img
Click to expand...
Click to collapse
Reboot your phone into fastboot mode
Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
Reboot into recovery mode (fastboot reboot recovery)
When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
Reboot and enjoy!
With custom recovery
Download TWRP .ZIP installer and flash it in recovery (you can also use adb sideload for recoveries like LineageOS recovery)
Compatibility
Android 11 Roms: YES
Android 12 Roms: NO
TWRP-3.6.2_12-rc1
NameModifiedTWRP-3.6.2_12-rc108/04/2022
Changelog
Sync TWRP sources
Add support for Android 12 decryption
Fix booting on MIUI13
DONT INSTALL THIS ON MIUI 12.5
Install instructions
Without TWRP/OrangeFox
Note: You need a copy of your ROM boot.img
Click to expand...
Click to collapse
This device DOES NOT support fastboot boot twrp.img
Click to expand...
Click to collapse
Reboot your phone into fastboot mode
Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
Reboot into recovery mode (fastboot reboot recovery)
When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
Reboot and enjoy!
With custom recovery
Download TWRP .ZIP installer and flash it in recovery (you can also use adb sideload for recoveries like LineageOS recovery)
Compatibility
MIUI 13 vendors: COMPATIBLE
MIUI 12 vendors:
A11 GSI / MIUI 12 system: FULLY INCOMPATIBLE
A12 GSI: COMPATIBLE, but you CAN NOT flash the boot.img, you need to flash the UPDATE ZIP using a custom recovery / Magisk
OrangeFox-R11.1_1-Unofficial
NameModifiedOrangeFox-R11.1_1-Unofficial07/01/2022
Changelog
Fix brightness when max brightness is 255
Render GUI at 60FPS
Reposition statusbar icons and remove top offset
A lot of code cleanup
Update OrangeFox sources
DONT INSTALL THIS ON MIUI 13
Update Magisk OrangeFox addon to v25.2
Install instructions
Without TWRP/OrangeFox
Note: You need a copy of your ROM boot.img
Click to expand...
Click to collapse
This device DOES NOT support fastboot boot twrp.img
Click to expand...
Click to collapse
Reboot your phone into fastboot mode
Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
Next, download OrangeFox .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
Reboot into recovery mode (fastboot reboot recovery)
When booted into recovery, reflash stock boot.img (Select stock boot.img -> “Flash to: Boot”)
Next, go in Menu -> Flash current OrangeFox and swipe to flash OrangeFox.
Reboot and enjoy!
To get Fox addons working, you need to reflash OrangeFox .zip file
With custom recovery
Download OrangeFox .ZIP installer and flash it in recovery (you can also use adb sideload for recoveries like LineageOS recovery)
Compatibility
Android 11 Roms: YES
Android 12 Roms: NO
Older versions:
NameModifiedBeta-07-11-30-202112/17/2021
🗞 Changelog
Sync TWRP sources (Version number updated to 3.6.0)
Symlink /dev/block/bootdevice -> /dev/block/platform/bootdevice (required by some scripts like OrangeFox installer)
Allow flashing VBMeta
Disable "Reflash TWRP after flashing ROM". (Causes AVB problem when installing MIUI, can still be done manually)
Build ZIP TWRP installer
Publish build logs for more transparency
Known bugs
Mounting Adopted storage
Vibrator
NameModifiedRC-01-01-09-20221/9/2022
🗞 Changelog
Fix Bootctrl
Fix vibrator
Known bugs
Mounting Adopted storage
TWRP Version 3.6.1_11-1
NameModifiedTWRP-3.6.1_11-13/13/2022
🗞 Changelog
Fix BootCTRL
Update TWRP sources
Fix vibrator
Enable DT2W in recovery
Install instructionsWithout TWRP/OrangeFox
Note: You need a copy of your ROM boot.img
Click to expand...
Click to collapse
This device DOES NOT support fastboot boot twrp.img
Click to expand...
Click to collapse
Reboot your phone into fastboot mode
Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
Reboot into recovery mode (fastboot reboot recovery)
When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
Reboot and enjoy!
With TWRP/OrangeFox
Download TWRP .ZIP installer and flash in recovery
TWRP Version 3.6.2_11-1
NameModifiedTWRP-3.6.2_11-16/14/2022
🗞 Changelog
Sync TWRP sources
Orangefox Recovery Version R11.1_1-Beta
NameModifiedOrangeFox-R11.1_1-Beta3/13/2022
🗞 Changelog
Fix BootCTRL
Update OrangeFox sources
Fix vibrator
Enable DT2W in recovery
Update Magisk OrangeFox addon to 24.2
Install instructionsWithout TWRP/OrangeFox
Note: You need a copy of your ROM boot.img
Click to expand...
Click to collapse
This device DOES NOT support fastboot boot twrp.img
Click to expand...
Click to collapse
Reboot your phone into fastboot mode
Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
Next, download OrangeFox .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
Reboot into recovery mode (fastboot reboot recovery)
When booted into recovery, reflash stock boot.img (Select stock boot.img -> “Flash to: Boot”)
Next, go in Menu -> Flash current OrangeFox and swipe to flash OrangeFox.
Reboot and enjoy!
To get Fox addons working, you need to reflash OrangeFox .zip file
With TWRP/OrangeFox
Download OrangeFox .ZIP installer and flash in recovery
Nice, it's beta 2
to apply encrypt patch, you must decrypt first.
So
- you have to disable security password/fingerprint in your parameter first.
- then reboot in recovery
- format data
- reboot again to recovery and apply patch.
How to use redmi note 10s unofficial twrp recovery
test (beta 2) after disabling security (fingerprint and pin)
- flashing magisk.zip -> ok
- backup -> ok
- restore -> ok
- MTP internal SD -> ok
- MTP external SD -> nok, file manager stuck on it (win10 or linux mint)
Please full prosses explain and 1 question flash fastboot method
This the link of the Official Tutorial from the Unofficial TWRP Website:
unofficial twrp 3.6.1 Root Redmi Note 10s (rosemary) - unofficial twrp
Download unofficial twrp 3.6.1 root Redmi Note 10s, user who own Redmi Note 10s can root it by following the below instructions
unofficialtwrp.com
Great
miravision said:
Developer WoomyMy has released an unofficial TWRP for rosemary - xiaomi redmi note 10s
Installation Video:
Code:
https://www.mediafire.com/file/f4zcls9sgi3nkoj/352+redmi+note+10s.rar/file
http://www.mediafire.com/file/p3zhivru97bdlke/no-verity-opt-encrypt-6.1.zip/file
Since this is not yet official, only proceed if you are competent enough and brave.
(If you need instructions on how to flash, please do not flash this with fastboot method)
Feel free to discuss any bugs or issues and fixes so that everybody can benefit from our findings.
Click to expand...
Click to collapse
I'm sorry but, do you atleast have the permission to share this?
Also, WommyMy should be the guy to upload it, not you.
Edit: thanks for fixing the thread
Also you're missing the device tree.
Hello. As one of the developpers of this TWRP DT, I am not really OK with that.
Firstly, you linked the wrong device tree Real link here
Also, I didn't published this on XDA because this TWRP is still in BETA. And it contains major bugs, like flashing dynamic partitions in fastbootd. Even if bugs will me fixed, I was planning to wait a release candidate before publishing the release here (this will require even more testing, if people want to help us testing, this will be even better).
So please, can you delete this or add clear warnings about the beta state?
Regards, Woomy
@miravision I think we should also add credits to people like @J6idot , @mastersenpai05 and Myst33d who did a great job helping building twrp.
Woomymy said:
@miravision I think we should also add credits to people like @J6idot , @mastersenpai05 and Myst33d who did a great job helping building twrp.
Click to expand...
Click to collapse
Yes, I believe they should get their work credit.
Will be fix soon.. don't too hurry.
mastersenpai05 said:
Will be fix soon.. don't too hurry.
Click to expand...
Click to collapse
Thanks bro
Keeps restarting when i try to flash a custom ROM from xiaomi eu, any Fix please ?
Wow., Hoping for releasing custom roms for our handsets.,keep up the good work devs
Katho536 said:
Keeps restarting when i try to flash a custom ROM from xiaomi eu, any Fix please ?
Click to expand...
Click to collapse
Xiaomi eu has no support for 10s iirc
No support for Mediatek devices on Xiaomi.eu, Global.rom and other
@miravision can u provide the vbmeta.img file?
Original post updated with attached vbmeta.img
langithitam said:
@miravision can u provide the vbmeta.img file?
Click to expand...
Click to collapse
Hi and thanks for sharing
Is it possible just to boot from TWRP recovery via Fastboot without flashing it on the phone?
I have also a Poco X3 NFC with stock MIUI 12.5 with Magisk root, but with stock recovery (so I can do all OTA updates) where I'm doing the same.
When I need it, I just do
fastboot boot TWRP-file.img
Thanks
REQUIRED CONDITION: YOUR PHONE MUST SUPPORT Project Treble
(if you don't know if your phone supports project treble , download Treble Check on Play Market)
i installed android 12 gsi on my A70 (a70q)
1) download GSI https://developer.android.com/topic/generic-system-image/releases, choose the version you need (gms-google services)
2)open your .zip archive и extract the file system.img to your SD card
3)download permissiver_v5.zip https://androidfilehost.com/?fid=6006931924117940902, and copy to SD card
4)reboot your phone in download mode
5)flash twrp and vbmeta via odin(bootloader must be unlocked)
6)reboot to recovery twrp
7)on twrp- wipe->advanced wipe->select Dalvik, Cache, System, Data
8)install-select storage(your sd)->install image (select system.img) and swipe
9)reboot-power off
10)boot in twrp
11)mount-select Vendor
12)advanced-file manager->vendor/overlay and select delete this folder
13)install-permissiver_v5.zip
14)reboot system
hello, I wanted to know if the fingerprint works when installing android 12, the truth is that I am interested in installing android 12 gsi I have a samsung A70MN
Its working