After update b390,, ever thing is OK ?, and work perfectly..
But camera ? not working, please help.
install FIRMWARE FINDER for Huawei
install Firmware Finder for huawei fro android market, there are FULL OTA update in there just select your phone model and it will give you the updated firmware for your phone, it works on my EVA L19-Missing stock apps and camera,bluetooth,themes not functioning- just select 1 step upgrdae ex. from B393 to B394,
-> open firmware finder
-> select phone model
-> select firmware ex. EVAL19C636B394
(make sure to sellect the FULL OTA and not the OTA MF)
-> select check firmware access
-> select with imei
-> then after select GET AN UPDATE THROUGH DNS
-> then select REGISTER UPDATE
after those step, go to setting-> system update
now it will show thats there is new update and just download it, after finishing the download just apply the updated one but before restarting turn off the dns server running in your status bar,
after restaringand installing the update!! WALLAH your phone now is working perfectly.
Good day!
Huawei P9 Plus
VIE-L29
C636B388 to B389
The first I did was,
1. Unlocked bootloader
2. Flashed twrp
3. Install root
4. Accidentally wiped OS (no os installed! cant boot)
5. Fixed it by MRT Tool (with not same region firmware but fixed boot problems)
tho I cannot apply themes!
but bootloader locked again and removed root and twrp.
Everything was working fine! Except I cant install the system update yesterday.
the b389 update (200+mb)
but when I load again hours ago, it gave me the full package (2gb)
I downloaded it and installed!
After installation, STOCK APPS WENT MISSING!
1. Bluetooth
2. Screen Recorder
3. Notepad
4. Themes
5. Smart Controller
6. Huawei swype keyboard
7. Sound recorder
8. Sim manager
also, settings loads so slow. boots slow at first open after reboot.
AND A LOT MORE!
Mostly all my stock apps are gone!!!!
Can someone help me?
Or even send just send me there HiSuite backup of apps and homescreen settings.
I would be happy to try to restore my apps with that if it will work.
or any suggestions on how to fix? I need your help.
Thanks!
install FIRMWARE FINDER for Huawei
install Firmware Finder for huawei fro android market, there are FULL OTA update in there just select your phone model and it will give you the updated firmware for your phone, it works on my EVA L19-Missing stock apps and camera,bluetooth,themes not functioning- just select 1 step upgrdae ex. from B393 to B394,
-> open firmware finder
-> select phone model
-> select firmware ex. EVAL19C636B394
(make sure to sellect the FULL OTA and not the OTA MF)
-> select check firmware access
-> select with imei
-> then after select GET AN UPDATE THROUGH DNS
-> then select REGISTER UPDATE
after those step, go to setting-> system update
now it will show thats there is new update and just download it, after finishing the download just apply the updated one but before restarting turn off the dns server running in your status bar,
after restaringand installing the update!! WALLAH your phone now is working perfectly.
Use this guide to install OTAs manually in case you haven't received the update yet or you are bootloader unlocked/rooted.
1.) Download the corresponding OTA package from the links posted here by @mickey36736 - https://forum.xda-developers.com/zenfone-5z/how-to/zs620kl-fota-update-links-update-20-08-t3831794.
2.) Rename it in the format UL-Z01R-WW-{version number}-user.zip (excluding the braces).
3.) Drop it in the root of your internal storage and reboot.
4.) You should see the update notification once the phone boots up.
5.) Start the update (or) in case you are rooted using Magisk and want to preserve root, skip to step 6.
6.) Open Magisk Manager and select Uninstall > Restore Images
7.) Start the update.
8.) Once the update is done, don't reboot yet. Open Magisk Manager and select Install > Install to inactive slot (after OTA).
9.) Once the installation is done, reboot.
Note: Make sure 'Preserve AVB 2.0/dm-verity' is checked in Magisk Manager and you didn't flash vbmeta with the disable verity and disable verification flags, or the OTA won't install.
Pie is here peeps
https://forum.xda-developers.com/zenfone-5z/how-to/zs620kl-fota-update-links-update-20-08-t3831794
Hi, here's a guide on how install crDroid 7.5 (A11) on Redmi 8
UPDATE: THERE'S 7.5 VERSION AVAIABLE, IF YOU ARE USING 7.4 FOLLOW THIS STEPS TO UPDATE WITHOUT LOSING DATA (NEW ROM IS IN MEGA FOLDER, ):
1- Reboot in recovery
2- Go to Wipe -> Avanced wipe -> wipe dalvik, cache and system
3- Go to Reboot -> Recovery
4- Now follow the normal guide from the flashing of the .img file as system image
VERY IMPORTANT: DON'T FORMAT DATA AFTER FLASHING GSI FIXER OR YOU WILL LOST ALL YOUR DATA
Features:
- All functions of the phone work (face unlock, fingerprint, voLTE, voWIFI, hotspot, bluetooth, fast charge, DT2W, ...)
- Magisk safetynet passed without flash nothing (screenshot at the bottom)
- Permissive Selinux by default (in settings is writing disabled, it's wrong) but you can switch to enforcing with
SelinuxModeChanger app, apk at the bottom
What doesn't work
- Nothing if you use fixes below
Note 1: You may have problems with the brightness or sim calls/sms, there are solutions:
- For brightness: Open settings -> Go in "Phh Treble Settings" -> "Misc Features" -> Scroll until you are in backlight menu -> Select "Force alternative backlight scale" and "Enable auto-brightness overlay" -> then deselect both and reboot
- For sim calls: Open settings -> Go in "Network and internet" -> "Mobile network" -> Tap on "Preferred network type" and select "GSM/WCDMA/LTE" or "Global" (try which is better for you) and then reboot
Note 2: If you fing bugs tell me in comments, maybe I could help you (I'm not the developer of the rom)
IMPORTANT ADVICE:I am not responsible for any damage caused to your device by not following the steps, all the steps were tested on my personal device and are confirmed, my device is Redmi 8 4/64
Installation Steps - All the files you need are HERE
Note 3: I did the installation coming from Mui 12.0.1 stock (flashed in fastboot with Mi Flash) and there was no problem in the installation process or in the boot process, YOU NEED THIS ROM IF YOU WON'T PROBLEMS
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%
All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Before continue following steps estract on pc "crdrom-v302-210315-arm64-bvZ.img" from "crdrom-v302-210315-arm64-bvZ.img.xz" and activate USB debug in phone settings
4- Reboot in fastboot and connect the phone to the pc with cable
5- Install on pc minimal adb tool (zip at the bottom), flash the TWRP recovery typing " fastboot flash recovery ", now drag twrp file near the command, then vbmeta typing " fastboot --disable-verity --disable-verification flash vbmeta " and drag vbmeta file near the command. Finished the procedure type " fastboot reboot " and hold volume + on the phone until you see the recovery screen
6- Scroll on the slider at the bottom of the phone screen to access in the TWRP
7- Go to Wipe -> Format data -> type "yes"
8- Go to Reboot -> Recovery
9- Go to Wipe -> Avanced wipe -> wipe dalvik, data, cache and system
10- Go to Reboot -> Recovery
NOW YOU HAVE TO TRANSFER ALL OTHER FILES OR IN THE INTERNAL STORAGE OF THE PHONE OR IN SD/USB WITH OTG CABLE
11- Go to Install -> Select the storage where you have files -> Install img -> select "crdrom-v306-210425-arm64-bvZ.img" (Extracted from the .xz file) -> select "system image" and flash
12- Wait and then go to Reboot -> Recovery
13- Wipe -> Advanced wipe -> select "system" and click on "Repair or change file system" -> Resize system
14- Wait and then go to Reboot -> Recovery
15- Install -> Select the storage where you have files -> Flash "GSI-BUGS-FIXER_11_Q.zip"
16- Wipe -> Format data -> type "yes"
17- Wait and then go to Reboot -> Recovery
18- Install -> Select the storage where you have files -> Flash "BiTGApps-arm64-11.0.0-R19_signed.zip"
19- Wait and then go to Reboot -> System
20- Configure phone and enjoy your new rom
Note 4: I reccomend you to flash magisk after you have configured the rom to avoid problems, I leave you the zip to flash in recovery below
Note 5: I reccomend you the best gcam I've found for Redmi 8, everything works except slow motion, link HERE
Thanks for the attenction
-Estatè
Happy that many GSI roms are under develment. I hope this phone will die due to hardware, as there are lots of options in future to keep the software updated.
Anyway, if someone intends to try, following is the link of all GSI Roms.
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Can i flash vbmeta through recovery
Naulels said:
Can i flash vbmeta through recovery
Click to expand...
Click to collapse
Hey
I'm not using crDroid yet, but I've already installed TWRP.
It is advertised that you should flash vbmeta when you're installing TWRP.
I hope I can help you
Hey !
I wanna try this but I have rooted my phone so here is my question : do I need to remove the root to install this GSI ?
Thx a lot
Volume doesn't work correctly, I cannot increase or decrease the volume. And I plugged my headphone not play through headphone, it play through speaker. Sorry my English
Naulels said:
Can i flash vbmeta through recovery
Click to expand...
Click to collapse
No, you have to flash it with ADB like twrp
letouvetpierre said:
Hey !
I wanna try this but I have rooted my phone so here is my question : do I need to remove the root to install this GSI ?
Thx a lot
Click to expand...
Click to collapse
I recommend you to remove it from the magisk app to avoid problems but I think that would be the same
Naulels said:
Volume doesn't work correctly, I cannot increase or decrease the volume. And I plugged my headphone not play through headphone, it play through speaker. Sorry my English
Click to expand...
Click to collapse
I haven't this problem, have you flashed the gsi fixer? Did you start the installation from miui 12.0.1? It's really important, anyway, you can try to do again the procedure
Does VoLTE and VoWIFI works ? It's a GSI so I'm not thinking it works...
letouvetpierre said:
Does VoLTE and VoWIFI works ? It's a GSI so I'm not thinking it works...
Click to expand...
Click to collapse
Yes, all work fine becouse you flash the gsi fixer for gsi roms on redmi 8
Estatè Mosconi said:
I haven't this problem, have you flashed the gsi fixer? Did you start the installation from miui 12.0.1? It's really important, anyway, you can try to do again the procedure
Click to expand...
Click to collapse
I have reinstalled and fixed it, thanks
Hey !
I'm so happy !
Everything works on that GSI rom, but I haven't the certification on SafetyNet.
With the covid-tracing app, there is a little problem but it's with all the custom roms so...
Thanks a lot for your guide !
letouvetpierre said:
Hey !
I'm so happy !
Everything works on that GSI rom, but I haven't the certification on SafetyNet.
With the covid-tracing app, there is a little problem but it's with all the custom roms so...
Thanks a lot for your guide !
Click to expand...
Click to collapse
Hi, I'm happy for you, for safetynet try the magisk module, I didn't have this problem, anyway, try the rom and than leave a feedback, it could be useful for other people who want to try this rom
I can't get this rom to work correctly. Did the steps as described, but it has SELinux not enforced and Google play isn't certified. Tried multiple times.
EDIT: seems my phone is soft bricked now (Can't install any rom). Going back to xaomi stock to try again.
I tried again and got it to work. The certificate patch throws an error but Google apps are working.
I get an SE Linux not enforcing error. though.
Is there anything I can do about that?
I lost the treble-overlay-xiaomi-redmi8.apk file ,I should problems with the brightness
ndduc said:
I lost the treble-overlay-xiaomi-redmi8.apk file ,I should problems with the brightness
Click to expand...
Click to collapse
There is the solution for brightness in the guide, you don't need that file
Estatè Mosconi said:
There is the solution for brightness in the guide, you don't need that file
Click to expand...
Click to collapse
thanks you, i fixed
ndduc said:
thanks you, i fixed
Click to expand...
Click to collapse
Ok good
Hi, here's my guide on how install Ancient OS 5.2 (A11) on Redmi 8
What doesn't work
- Bluetooth
- 4g network and VoLTE (Fix below)
- Brightness slider and auto-brightness (Fix below)
Fixes:
- For brightness: Open settings -> Go in "Phh Treble Settings" -> "Misc Features" -> Scroll until you are in backlight menu -> Select "Force alternative backlight scale" and "Enable auto-brightness overlay" -> then deselect both and reboot
- For 4g and VoLTE: Open settings -> Go in "Network and internet" -> "Mobile network" -> Tap on "Preferred network type" and select "LTE" and then reboot
Note 1: If you find a fix for bluetooth describe it in comments, I will update the guide
Note 2: If you fing other bugs tell me in comments, maybe I could help you (I'm not the developer of the rom)
IMPORTANT ADVICE:I am not responsible for any damage caused to your device by not following the steps or negligence at the time of this process, all the steps were carried out and tested on my personal device and are confirmed, my device is Redmi 8 4/64
Installation Steps - All the files you need are HERE
Note 3: I did the installation coming from Mui 12.0.1 stock (flashed in fastboot with Mi Flash) and there was no problem in the installation process or in the boot process
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%
All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Before continue following steps estract on pc "system-arm64-AB-vndklite.img" from "AncientOS-R-Society-v5.2-ARM64_AB_vndklite-Iron-20210227-vanilla.zip" and activate USB debug in phone settings
4- Reboot in fastboot and connect the phone to the pc with cable
5- Install on pc minimal adb tool (zip at the bottom), flash the TWRP recovery typing " fastboot flash recovery ", now drag twrp file near the command, then vbmeta typing " fastboot --disable-verity --disable-verification flash vbmeta " and drag vbmeta file near the command. Finished the procedure type " fastboot reboot " and hold volume + on the phone until you see the recovery screen
6- Scroll on the slider at the bottom of the phone screen to access in the TWRP
7- Go to Wipe -> Format data -> type "yes"
8- Go to Reboot -> Recovery
9- Go to Wipe -> Avanced wipe -> wipe dalvik, data, cache and system
10- Go to Reboot -> Recovery
NOW YOU HAVE TO TRANSFER ALL OTHER FILES OR IN THE INTERNAL STORAGE OF THE PHONE OR IN SD/USB WITH OTG CABLE
11- Go to Install -> Select the storage where you have files -> Install img -> select "system-arm64-AB-vndklite.img" and flash it (Extracted from the zip)
12- Wait and then go to Reboot -> Recovery
13- Wait and then go to Reboot -> Recovery
14- Wipe -> Advanced wipe -> select "system" and click on "Repair or change file system" -> Resize system
15- Wait and then go to Reboot -> Recovery
16- Install -> Select the storage where you have files -> Flash "GSI-BUGS-FIXER_11_Q.zip"
17- Wait and then go to Reboot -> Recovery
18- Install -> Select the storage where you have files -> Flash "open_gapps-arm64-11.0-nano-20210130-TEST.zip"
19- Wait and then go to Reboot -> System
20-Configure phone and enjoy your new rom
Note 4: Rom is pre-rooted, you only need to install magisk apk, file below
Note 5: I reccomend you the best gcam I've found for Redmi 8, everything works except slow motion, link HERE
Thanks for the attenction
-Estatè
zas far as i know bluetooth works on vendor from lineageOS 16 from this forum, there are the same bugs on every rom with original vendor.
Why U use my fixes and manuals without request to me? Your manuals wrong and makes bootloop. Before stupid copy-paste read instructions.
All roms booted without any permissiver. Certification patch retarded and not supported Android 11.
GSI FIXER is rom and vendor-specified.
Number in name = Android in rom
Letter in name = Android in vendor
kulaklığımı algılamıyor
edit: Fixed
Vicuel said:
does not detect my headphone
Click to expand...
Click to collapse
Open termux and type....
su
Then give termux root access....
Then type.....
setprop persist.sys.overlay.devinputjack true
mwaseem851 said:
Open termux and type....
su
Then give termux root access....
Then type.....
setprop persist.sys.overlay.devinputjack true
Click to expand...
Click to collapse
This needs to be done after every reboot?
gattud said:
This needs to be done after every reboot?
Click to expand...
Click to collapse
Nono, only paste it in termux with root access and reboot, then you will solve the problem forever
mwaseem851 said:
Termux'u açın ve .... yazın.
su
Sonra termux root erişimi verin ....
Sonra yazın .....
setprop persist.sys.overlay.devinputjack doğru
Click to expand...
Click to collapse
thanks
Don't use any my GSI-BUGS-FIXERS from XDA. This fixes retarded and no more supported!
Don't say to me in Telegram chat about bugs if you use fixes and instructions from any users of XDA except me.
I used the gsi bugs fixer in Telegram
@Estatè Mosconi If you haven't already I suggest you take a look in your PM inbox.