Related
Hello all,
I just got my AT&T Tilt and love it so far, except for one major annoyance. When I press the power button, the device will turn the screen back on after a few seconds to a few minutes. The problem is when it's in my pocket, it can accidentally call people. My 8125 and 8525 did not experience this issue.
Any suggestions?
Thanks!
Button lock
It sounds as though the phone isn't set to lock all buttons except the power button when it is in standby. This happened to me last time I re-flashed my Wizard, and I couldn't figure out for ages why my battery was draining so quickly as well!
Settings > Buttons > Lock
Hmm, not seeing any option under Buttons or Lock. I do remember this setting from WM5. It does appear, however, that the buttons are not turning the phone on, it's just waking up even if I leave it on a desk.
You can add lock to the home screen
first press and hold the hang-up button so that it locks. Then just push the power button once. This puts it in standby.
There is a idle timeout for going on standby mode, but I can't find a setting to auto-lock.
JBHorne said:
When I press the power button, the device will turn the screen back on after a few seconds to a few minutes.
Click to expand...
Click to collapse
Are you paired to a Bluetooth device? I see similar behavior in my 8525 when in my car - the BT car kit does stuff which "wakes" the 8525
Richard
Try this leaving Google Maps On the Screen
Hi Guys,
I get this behavior when I have Google Maps running. It will even cycle the screen on and off a couple times.
nope and nope. just sitting on the today screen.
JBHorne said:
When I press the power button, the device will turn the screen back on after a few seconds to a few minutes.
Click to expand...
Click to collapse
I have the very same problem.
However, my girlfriend whom I also bought a Tilt for, her's doesn't do it.
We've installed all the same software too, so I'm a little puzzled.
start>settings>system> key lock. set it to lock all buttons except power.
rzanology said:
start>settings>system> key lock. set it to lock all buttons except power.
Click to expand...
Click to collapse
Hmmm.. yeah, umm my key lock is already set to lock all buttons except power.
The problem isn't with when you press a button it comes on. The problem is the phone turns on by itself, sitting on a table, nothing being pressed, no new email, no new sms, just lights up and that's it.
JonRick said:
Hmmm.. yeah, umm my key lock is already set to lock all buttons except power.
The problem isn't with when you press a button it comes on. The problem is the phone turns on by itself, sitting on a table, nothing being pressed, no new email, no new sms, just lights up and that's it.
Click to expand...
Click to collapse
Any number of applications might be starting the device, from weather apps to calendar, diary, time sync etc etc. For example, HTCs weather app will do it depending on how often you have it set to another example I came across from someone was TREO ALERTS that contains a script "refresh.mscr" and it was set up refresh time 30 seconds (this was turning his TyTn II on by itself).
Mike
hard reset and try again.
i'm betting that none of these suggestions were helpful (except the one about some application generating a wakeup event without any other visual notifications).
i was having the same problem, but i just tried to narrow down which running program was causing the events. it's one of:
* wireless manager
* messaging
* IM
my guess is IM; i'm going to test that out in a second.
well, it's none of the above. still seems to wake up randomly anywhere from 15 seconds to several minutes.
seems to happen more frequently when it's just been turned off.
Even if you were to find what was turing the phone back on, this can still be a problem just from normal use... obviously, you WANT the phone to turn on for things like a call coming in. The solution for people like us who stick our phones in our pockets is to "lock" the phone. But for whatever reason, the Tilt doesn't lock the phone while holding down the end key. That means the only convenient way to lock it is to keep the lock function on the today screen, wasting space. Hopefully someone can find a way to allow the end key to lock the device on the Tilt just like the unbranded device.
dscline said:
Even if you were to find what was turing the phone back on, this can still be a problem just from normal use... obviously, you WANT the phone to turn on for things like a call coming in. The solution for people like us who stick our phones in our pockets is to "lock" the phone. But for whatever reason, the Tilt doesn't lock the phone while holding down the end key. That means the only convenient way to lock it is to keep the lock function on the today screen, wasting space. Hopefully someone can find a way to allow the end key to lock the device on the Tilt just like the unbranded device.
Click to expand...
Click to collapse
i'm fine with using the lock function, but it still turns on randomly, using battery, and eventually unnecessarily yellowing the screen from backlight aging. my next approach is to check out the notification queue, using a notification cleaner app.
So i am having a similar problem. When i press the power button, the phone's screen turns off but when the keyboard slides, it turns back on... is there a way to make it so the keyboard sliding does not turn on the device? I think the keyboard slides around a little when in my pocket and i hate pushing 3 buttons to unlock my phone... thanks
I was having the same problem.
This is an issue with the ATT rom. Flash over HTC rom and you will be all set.
I have been having the same problem as well. I just installed this DeviceLock program:
http://forum.xda-developers.com/showthread.php?t=305402
If you enable the "Lock on Wake" option, the device will be locked when it wakes up, so the backlight stays off and you won't call anyone by accidentally hitting buttons.
Also, I ran across this related thread you might want to check out (basically talking about the same thing, but for the TyTn II):
http://forum.xda-developers.com/showthread.php?t=341419
Is it possible to have the power button behaviour modified so that it only turns the screen off? I'm hoping there's a utility or setting somewhere.
When the phone is in my pocket it constantly turns itself on and starts tapping away. It never gets past the lockscreen but it's annoying to have battery drained like this.
aaphid said:
Is it possible to have the power button behaviour modified so that it only turns the screen off? I'm hoping there's a utility or setting somewhere.
When the phone is in my pocket it constantly turns itself on and starts tapping away. It never gets past the lockscreen but it's annoying to have battery drained like this.
Click to expand...
Click to collapse
Are you sure it is the power button and not rather the tap to wake that is activating it in your pocket? (Settings->Display->Tap to wake up)
aaphid said:
Is it possible to have the power button behaviour modified so that it only turns the screen off? I'm hoping there's a utility or setting somewhere.
When the phone is in my pocket it constantly turns itself on and starts tapping away. It never gets past the lockscreen but it's annoying to have battery drained like this.
Click to expand...
Click to collapse
I had the exact same problem. Tried the following things:
1) Changed the locker - used Nils Locker Master - worked well, but it stopped working with recent 5.0.2 update.
2) Used PIN lock - too inconvenient, and even then the emergency call button would get 'tapped' accidentally while in my pocket
3) Currently using a nice cover which raises the edges around the power button slightly, so it doesn't get pressed automatically anymore when in my pocket.
TheV said:
Are you sure it is the power button and not rather the tap to wake that is activating it in your pocket? (Settings->Display->Tap to wake up)
Click to expand...
Click to collapse
Thanks but it has been happening for a long time before I enabled tap to wake so that's not it.
farhadtarapore said:
I had the exact same problem. Tried the following things:
1) Changed the locker - used Nils Locker Master - worked well, but it stopped working with recent 5.0.2 update.
2) Used PIN lock - too inconvenient, and even then the emergency call button would get 'tapped' accidentally while in my pocket
3) Currently using a nice cover which raises the edges around the power button slightly, so it doesn't get pressed automatically anymore when in my pocket.
Click to expand...
Click to collapse
Do you have a link for "Nils Locker Master"?
ATM I have pin lock and that's fine.
I prefer not to have any sort of cover/case.
aaphid said:
Do you have a link for "Nils Locker Master"?
ATM I have pin lock and that's fine.
I prefer not to have any sort of cover/case.
Click to expand...
Click to collapse
Hi
https://play.google.com/store/apps/details?id=com.qiigame.flocker.global&hl=en
So after exactly a year my note 5 went all purple people eater on me and now the screen is black. Digitizer still works.
Here is my problem: How the hell do I turn it off?
Also how would I turn on USB debugging without a screen display?
I can unlock the sceen using Samsung account tho.
Thanks!
That's what I always hated in Android (vs. WP), the system asks you thousands of times "are you sure you want to do this or that"- Same applies when you want to turn your device off, you need to do three actions:
1) Press the start button for 2 seconds
2) Press the screen to select "Power off". It's located at near 70% height and 50% width (middle)
3 Confirm you want to shut down (right in the middle of the screen)
Not sure about USB debugging mode though...
I hope this helps. Get yourself a new screen asap.
Could not accomplish. The Samsung page says my phone is completely unlocked but trying to press buttons I cannot see is damn hard.
9 out of 10 screenshots I take are by accident when I'm trying to press the power button to turn the screen off. With the volume buttons opposite the power button, it's too easy to press them. Is there a way to change how a screenshot is taken?
Enable the swipe gesture in advance features
Sent from my SM-N9600 using Tapatalk
That's already on, but the other way I'm talking about is still active.
Hold you phone differently, unless your hands are so monstrous that preventing your fingers from pressing the volume button is impossible.
Thanks for the Apple-grade suggestion like I've got bad reception on my iPhone. lol
Holding the phone as usual in my right hand, it's not typically a problem. But frequently if it's in my left or I do a quick reach with either to turn the screen on and view notifications and turn it back off, I end up with an accidental screenshot. If I could make it require a momentary hold of the buttons before it takes a screenshot, it would do the trick.
Jwikoff99 said:
Thanks for the Apple-grade suggestion like I've got bad reception on my iPhone. lol
Holding the phone as usual in my right hand, it's not typically a problem. But frequently if it's in my left or I do a quick reach with either to turn the screen on and view notifications and turn it back off, I end up with an accidental screenshot. If I could make it require a momentary hold of the buttons before it takes a screenshot, it would do the trick.
Click to expand...
Click to collapse
You could try installing a Bixby button remapper. Many of them allow you to set different functions to your hardware/mechanical buttons & or set delays of different intervals while keeping the current buttons doing the usual stock actions. If you are rooted you only need to install once. If you are stock UnRooted you need to run adb commands every time you turn off or reboot but this is the only option I can think of that will do what you need done. Bxactions is one app and another is button Mapper. Cheers & hope this helps you out.
Hi,
My note 8's screen got damaged a month ago, but
from past two days the power button seems to be
unresponsive.
I have to press it atleast 10-15 times for my screen
to wake up.
Even if the screen doesnt turn on by a single click,
the usual touchscreen functions still work.
Ex: I can still open the particular app by clicking the screen
on the specific area.
Kindly help.
rockz1991 said:
Hi,
My note 8's screen got damaged a month ago, but
from past two days the power button seems to be
unresponsive.
I have to press it atleast 10-15 times for my screen
to wake up.
Even if the screen doesnt turn on by a single click,
the usual touchscreen functions still work.
Ex: I can still open the particular app by clicking the screen
on the specific area.
Kindly help.
Click to expand...
Click to collapse
There's nothing any of us can do to help you when it's a hardware issue like this. You need to open the back of the phone using a heat gun to loosen the glue and then take the power button out and replace it with a new one.. There's nothing else that can be done and I would suggest that you not shut the phone down or let the battery die out because then you may not be able to turn it back on until you get the power button taken care of!
MrMike2182 said:
There's nothing any of us can do to help you when it's a hardware issue like this. You need to open the back of the phone using a heat gun to loosen the glue and then take the power button out and replace it with a new one.. There's nothing else that can be done and I would suggest that you not shut the phone down or let the battery die out because then you may not be able to turn it back on until you get the power button taken care of!
Click to expand...
Click to collapse
Hi MrMike2182,
Thanks but let me elaborate the issue.
The power button seems to be working fine because it takes approximately 10 to 15 clicks to turn on the screen (sometimes 1 or 2 click)
Let's say that I click the power button and the screen doesn't turn on, the screen functions work fine despite showing black screen.
Ex:
1. If I click on screen location where samsung music is placed and open it, and if I and click on the location of the play button, it plays the music just fine.
2. If I click on the restart button when the screen is black (not turned on), the phone does restart. The Samsung logo lits up just fine. (Mensing to say, the bootup process is not affected)
Also, note that if I successfully manage to turn on the screen after clicking the power button 10-15 times and if I put it to sleep again. I can easily turn on if I click the power button immediately (within the span of 2 seconds).
The problem persists only if the phone is kept I'd for 5 to 10 minutes.
rockz1991 said:
Hi MrMike2182,
Thanks but let me elaborate the issue.
The power button seems to be working fine because it takes approximately 10 to 15 clicks to turn on the screen (sometimes 1 or 2 click)
Let's say that I click the power button and the screen doesn't turn on, the screen functions work fine despite showing black screen.
Ex:
1. If I click on screen location where samsung music is placed and open it, and if I and click on the location of the play button, it plays the music just fine.
2. If I click on the restart button when the screen is black (not turned on), the phone does restart. The Samsung logo lits up just fine. (Mensing to say, the bootup process is not affected)
Also, note that if I successfully manage to turn on the screen after clicking the power button 10-15 times and if I put it to sleep again. I can easily turn on if I click the power button immediately (within the span of 2 seconds).
The problem persists only if the phone is kept I'd for 5 to 10 minutes.
Click to expand...
Click to collapse
Ok based on what you said now I don't believe there's anything wrong with your power button and when you press it and the screen doesn't turn on, in reality it actually is on and it's possibly damaged which is why you can still use the screen functions with the black screen. Whatever type of damage you say happened to it could be causing the backlight to not work but the screens touch function is fine.. Try rebooting into recovery mode and select to clear the phone's cache only and see if it helped anything.. If it doesn't help anything it's pretty much a screen hardware problem and you'll still have to get into the phone's internals..
MrMike2182 said:
Ok based on what you said now I don't believe there's anything wrong with your power button and when you press it and the screen doesn't turn on, in reality it actually is on and it's possibly damaged which is why you can still use the screen functions with the black screen. Whatever type of damage you say happened to it could be causing the backlight to not work but the screens touch function is fine.. Try rebooting into recovery mode and select to clear the phone's cache only and see if it helped anything.. If it doesn't help anything it's pretty much a screen hardware problem and you'll still have to get into the phone's internals..
Click to expand...
Click to collapse
Thanks,
Unfortunately, even factory resetting the phone didn't work out.
Anyway, I will take for service.
Hopefully it might resolve the issue
rockz1991 said:
Thanks,
Unfortunately, even factory resetting the phone didn't work out.
Anyway, I will take for service.
Hopefully it might resolve the issue
Click to expand...
Click to collapse
Since the factory reset didn't work, then unfortunately it really is a hardware issue.. I think you need a new screen..
I have the official led cover case, just opening the case will turn the screen on... Just a temp fix until you can get it repaired maybe.
stonedpsycho said:
I have the official led cover case, just opening the case will turn the screen on... Just a temp fix until you can get it repaired maybe.
Click to expand...
Click to collapse
Thanks stonedpsycho. I will have a look at it.