Related
Most screen protectors I've tried have been cut too small, I know the slightly curved glass causes problems but are there any screen protectors that go edge to edge or at least close?
its cut smaller to accommodate case use
xtremeguard is the only one I know that seems to cut it bigger (ie closer to the edge) for their screen protectors
cant say for the g2 as I moved away from them for that reason
Ghost armor covers edge to edge
Sent from my VS980 4G using xda app-developers app
I just put on one of Xtremeguards newer dry install protectors. It goes edge to edge but doesn't stay stuck down on the curved part. I put it on last night and after about the 4th time taking my phone out of my pocket this morning it caught and peeled off. I also got their wet install version, which I'll be putting on tonight and I'm sure will stick better, but I don't like the texture of those so I'll only be using it until I get a better dry one.
If you don't mind the more rubbery wet install protectors, that's your best bet for edge to edge, otherwise the smoother plastic ones have to be cut short for a reason.
I just did the whole proccess.
The whole thing doesn't cover the active screen fully. There is a thin uncovered part on the edges.
All around the protector I have a "lifted" frame that doesn't even touch the screen. Dirt and fiber will probably get stuck in there over time...
Also the camera glass protector is made out of a pretty non-smooth glass.. I can't even clean it with a cloth without leaving residue behind.
IS IT JUST ME?
Why is it so low quality??
I have one and the actual screen part is fully covered. Also, My protector is ever so slight;y lifted but not much. My camera protector is good as well.
I bought mine on ebay for under $10. Maybe they have quality control issues?
I have bought also Nillkin 9H protector and it fits as it should because it is made so it covers only the flat part of the screen.
Edges of the screen are rounded as you have noticed and protector can not fit on top of them , I know this because I had protector that was covering whole screen and it was not good believe me.
Full coverage screen protectors are not good for two reasons:
1. beneath the protector where are the edges dust collects and because there is very small gap you can not clean it. (looks horrible)
2. because protector is not in contact with rounded edges of the screen it will crack in 99% when it falls. (This is based on my personal experience)
So do not worry you'll get used to it and appreciate the benefits.
Can somebody please take a picture of how much gap there is to the edge of the screen for Nillkin? I have a noname screen 9H protector and considering switching to Nillkin if it has less edge gap.
Hi.
Okay so I've received the black Olixar Samsung Galaxy S6 Edge Curved Glass Screen Protector. I've opened up the box and inspected it closely and found the bottom two corner are slightly raised upwards and the black layer on the reverse of the glass
looks like it's peeling away in the same areas to where the two raised/upturned corners are at the bottom of the screen protection.
Can anyone confirm if their's is perfect or if they have corners looking like they are miss formed?
I just want to see if I should return it or live with it even though it will ruin the great looks of the S6 edge but will provide me with protection? I haven't taken any of the protection film off the glass protector or tried fitting it but if there all the same it would be a wast of time me returning it and my screen is currently unprotected, there's also a bit of a waiting list for these.
Thanks.
koy1 said:
Hi.
Okay so I've received the black Olixar Samsung Galaxy S6 Edge Curved Glass Screen Protector. I've opened up the box and inspected it closely and found the bottom two corner are slightly raised upwards and the black layer on the reverse of the glass
looks like it's peeling away in the same areas to where the two raised/upturned corners are at the bottom of the screen protection.
Can anyone confirm if their's is perfect or if they have corners looking like they are miss formed?
I just want to see if I should return it or live with it even though it will ruin the great looks of the S6 edge but will provide me with protection? I haven't taken any of the protection film off the glass protector or tried fitting it but if there all the same it would be a wast of time me returning it and my screen is currently unprotected, there's also a bit of a waiting list for these.
Thanks.
Click to expand...
Click to collapse
Hi there,
Thank you for your recent purchase of the black Olixar Samsung Galaxy S6 Edge Curved Glass Screen Protector. I can assure you that we have gone through an intense quality control process in order to ensure our customers receive the best and highest quality products. We are sorry you are not completely happy with your purchase. Please contact the retailer directly so they are able to replace this item for you.
Thanks Olixar
koy1 said:
Hi.
Okay so I've received the black Olixar Samsung Galaxy S6 Edge Curved Glass Screen Protector. I've opened up the box and inspected it closely and found the bottom two corner are slightly raised upwards and the black layer on the reverse of the glass
looks like it's peeling away in the same areas to where the two raised/upturned corners are at the bottom of the screen protection.
Can anyone confirm if their's is perfect or if they have corners looking like they are miss formed?
I just want to see if I should return it or live with it even though it will ruin the great looks of the S6 edge but will provide me with protection? I haven't taken any of the protection film off the glass protector or tried fitting it but if there all the same it would be a wast of time me returning it and my screen is currently unprotected, there's also a bit of a waiting list for these.
Thanks.
Click to expand...
Click to collapse
Mine is fine on the edges, I'd send a pic but only have the s6 edge with me lol
olixar said:
Hi there,
Thank you for your recent purchase of the black Olixar Samsung Galaxy S6 Edge Curved Glass Screen Protector. I can assure you that we have gone through an intense quality control process in order to ensure our customers receive the best and highest quality products. We are sorry you are not completely happy with your purchase. Please contact the retailer directly so they are able to replace this item for you.
Thanks Olixar
Click to expand...
Click to collapse
Thanks for the reply I'll send it back for a replacement.
Hey guys just wanted to give a heads up about the oneplus official tempered glass screen protector.
I don't know if others are as irritated by it but the screen protector stops short of covering the screen on all sides. I mean its so bad that the edge runs across the screen viewing surface on both sides. I did put in a complaint, maybe they will resolve it. I did order a Orzrly screen protector but canada post is on strike so I'm stuck with this irritating screen protector for a while. I don't seem to be allowed to link to pictures though.
andrewrcatton said:
Hey guys just wanted to give a heads up about the oneplus official tempered glass screen protector.
I don't know if others are as irritated by it but the screen protector stops short of covering the screen on all sides. I mean its so bad that the edge runs across the screen viewing surface on both sides. I did put in a complaint, maybe they will resolve it. I did order a Orzrly screen protector but canada post is on strike so I'm stuck with this irritating screen protector for a while. I don't seem to be allowed to link to pictures though.
Click to expand...
Click to collapse
Yeah i am. It creates massive problems while tapping on any options near those edges while gaming. Horrible.
@andrewrcatton, some gap around protector is not a quality issue rather it is a intentional decision on OP side.The reason is op3 has side curves
JumboMan said:
@andrewrcatton, some gap around protector is not a quality issue rather it is a intentional decision on OP side.The reason is op3 has side curves
Click to expand...
Click to collapse
So they intentionally decided to have a 5mm(guessing) gapp all around from the edges? That's stupid. I Under stand how the screen on my device curves but the edges of this protector is far from the edges, with it centered its 4-5mm from the edge of the viewable screen so you see a line down the right and left sides. Ill post pics when im allowed to.
andrewrcatton said:
So they intentionally decided to have a 5mm(guessing) gapp all around from the edges? That's stupid. I Under stand how the screen on my device curves but the edges of this protector is far from the edges, with it centered its 4-5mm from the edge of the viewable screen so you see a line down the right and left sides. Ill post pics when im allowed to.
Click to expand...
Click to collapse
Yes it is really a stupid decision of OP to such **** protector.
Don't buy these protectors instead use 3rd party full coverage one
Having the same problem, it looks awful. How did you raise the complaint with one plus? I can't even find an option to do so....
Does anyone know where I can get a proper fitting screen protector for the Zenfone 4 ZE554KL? None of the ones I've purchased fit the entire screen. They don't cover the edges because of the curve. Leaves about a 1/4 inch of white around the edge of the whole phone. Thanks.
Sent from my ASUS_Z01KD using Tapatalk
Borders
You have to get these SP with a sufix "3D/5D", that means that will cover edges
ps:. just supid "market nickname"