Database Develop

HELP URgent

i just update my xperia 1 software from 6.1 upgrade to 6.5, but now i stuck in a "align screen " this part is this how should i get rip of this?

legato231 said:
i just update my xperia 1 software from 6.1 upgrade to 6.5, but now i stuck in a "align screen " this part is this how should i get rip of this?
Click to expand...
Click to collapse
Try to hard reset your X1 as this:
1. turn off the phone
2. Hold both right and left buttons (the ones right under the screen)
3. press power button, while still holding the others
Hope it will help

ted presley said:
Try to hard reset your X1 as this:
1. turn off the phone
2. Hold both right and left buttons (the ones right under the screen)
3. press power button, while still holding the others
Hope it will help
Click to expand...
Click to collapse
me too
and if other rom specific issues arise, pls restrain them to the related rom thread to ensure best and quickest help for you and don't start opening new ones, thx

i had tried the solution but is useless.. is there other solution ? i had tried hard reset but still stuck in there

legato231 said:
i had tried the solution but is useless.. is there other solution ? i had tried hard reset but still stuck in there
Click to expand...
Click to collapse
take out your memory card
ask in the thread of the specific rom...

now the problem is solve but other problem occur my touch screen is totally is not function at all , OMG is it means i have to send my unit to the store?

legato231 said:
now the problem is solve but other problem occur my touch screen is totally is not function at all , OMG is it means i have to send my unit to the store?
Click to expand...
Click to collapse
Read the stickies! Read the thread of the ROM you are using and than complain!!!

Lokatho said:
Read the stickies! Read the thread of the ROM you are using and than complain!!!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Won't boot

rejanmanis said:
please help...
I used Odin3 v.1.85 ( included in the Quens_P100_EF17_ROOTED.zip )
I put Quens_P100_EF17_ROOTED_PDA.tar in pda slot.
and klik start.
But in the middle of the process, it said failed when flashing factoryfs.rfs
Now im stuck in this screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
whether i pressed Power off and ON or
Vol Up + power or Vol Down + power or Vol Up+down+power
get me to that screen.
if anyone can help please. what should i do ?
Click to expand...
Click to collapse
It is also happened to me but can't get in to download mode.
-I power off the tab.
-Hold the power button+volume down but it won't even boot in any mode.
-When plugged in the power it boots itself at the screen above.
-Holding the power button+volume down button it halts.
Any ideas?
Any help would be welcomed.
Sent from my GT-I9100 using xda premium

1-Use another version of odin like 1.70, google it.
2-use the correct pit file.
3-check the file is not corrupt, one day I try to changue the kernel in the rom and odin filed to flash it.

rafaeker19 said:
1-Use another version of odin like 1.70, google it.
2-use the correct pit file.
3-check the file is not corrupt, one day I try to changue the kernel in the rom and odin filed to flash it.
Click to expand...
Click to collapse
You mean that from that screen can use Odin?
Sent from my GT-I9100 using xda premium

Thanks men! Odin 1.70 did the trick. Thanks again everybody!
Sent from my SPH-P100 using xda premium

For anyone else who happens across this thread, you might also want to try Heimdall which is sometimes more reliable at getting past the exclamation-mark-PC-screen problem. Worked a charm for me, at least.

Yep Heimdall is good, but just make sure you put the files in the right place..... Paperweights can be bought much cheaper....

unroot GN?

Hello guys
i have to send in my Note in order to receive a replacement because it has some display issues.
I am currently on Rocket Rom ICS 1.5.
How can i unroot and delete all signs of the root and custom roms to keep my warranty?
Thanks in advance.

Just Flash latest available firmware for region using PC Odin. and Make sure there is no Yellow triangle and make sure your binary count is ZERO

ranjan.alva said:
Just Flash latest available firmware for region using PC Odin. and Make sure there is no Yellow triangle and make sure your binary count is ZERO
Click to expand...
Click to collapse
I just installed the stock rom. How can i check the binary Counter and how can i reset it?

the_deadliner said:
I just installed the stock rom. How can i check the binary Counter and how can i reset it?
Click to expand...
Click to collapse
Turn off your device completely. Hold Volume down + Home + Power for 5 Secs. Then it ll boot into download mode, Now press volume up button for Download mode confirmation. Now you are in download mode. on the left top corner you can see details about your phone. and it should be like below image (This is image of S2, But it looks like same as in N7000 also)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ranjan.alva said:
Turn off your device completely. Hold Volume down + Home + Power for 5 Secs. Then it ll boot into download mode, Now press volume up button for Download mode confirmation. Now you are in download mode. on the left top corner you can see details about your phone. and it should be like below image
Click to expand...
Click to collapse
Ok thank you, it is like the image. But before i confirm the volume up, i see a yellow triangle bellow with a "!" in it

the_deadliner said:
Ok thank you, it is like the image. But before i confirm the volume up, i see a yellow triangle bellow with a "!" in it
Click to expand...
Click to collapse
Ya.. Thats just a warning before entering download mode..

Note 5: bad firmware/OS - can't get around it

I'm working on a Galaxy Note 5 that I am trying to reset the firmware on. Someone's installed a custom build (that's verified in the "about phone" details) and it co-opts the volume down button boot sequence, so I can't get into download or safe mode. I've attached a screenshot. Has anyone seen this before and how to I purge this thing?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Your image isn't showing.

Image not showing
Ok, let's hope this works as a link to the image:
This happens with the power-volume down and power-volume down-home sequences, so I can't get it into safe mode. Someone's definitely put a custom image on, but I'm not sure how to clean it/replace it.
The power-volume up sequence works fine, but since this is a custom image, it won't get cleaned off by wiping the cache and/or factory reset.

Apparently, since I'm a newbie here, I can't post external links, which makes the forced external URLs for images a little useless to me right now...

Can't you just power off, boot into download mode and Odin a stock firmware, then re-root after?

blud7 said:
Can't you just power off, boot into download mode and Odin a stock firmware, then re-root after?
Click to expand...
Click to collapse
That's the thing - whoever did this co-opted the sequence to boot into download mode - power + volume-down/power + volume-down + home. I did find a way to do it without needing to go into boot mode, but I can't post the link here because I'm a newbie! That should solve my problem - I'm just setting it up on Linux and I'll keep people posted on the solution.
What's happened is that someone's basically done a custom firmware/kernel combo that makes it impossible to get into download mode, so you have to totally backdoor it. When I get it working and verify it, I'll post the solution here.

Can't power off phone or enter recovery.

Following official Magisk installation guide.
Phone is a Snapdragon S10+, China/HongKong model.
Just Odin'd Android 12, rebooted and installed Magisk app, repaired tar with recovery option because no ramdisk then Odin'd all again with new fixed AP tar.
The problem now is according to the guide I have to get into android's recovery mode somehow.
I've tried all manner of key combinations like Bixby+vol up+ power etc and nothing works except download mode again.
Do I really have to wait for the phone to run out of power?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is driving me nuts, anyone have any ideas?

I'm pretty sure the original firmware is damaged..here is what it would look like in English.

I
Zxalilh said:
I'm pretty sure the original firmware is damaged..here is what it would look like in English.
Click to expand...
Click to collapse
Also you should reinstall official Samsung firmware.

Zxalilh said:
I
Also you should reinstall official Samsung firmware.
Click to expand...
Click to collapse
It is official originally. That message is because I flashed a magisk repaired AP tar to try and gain root. The next step was to enter recovery.
From https://topjohnwu.github.io/Magisk/install.html#magisk-in-recovery
Heading: system-as-root

Tried again using a Canary build magisk, was able to finally get into recovery after flashing modified tar however the only option was a factory reset. Oh well..back to the drawing board.

twiice said:
Tried again using a Canary build magisk, was able to finally get into recovery after flashing modified tar however the only option was a factory reset. Oh well..back to the drawing board.
Click to expand...
Click to collapse
Oh ok

Zxalilh said:
Oh ok
Click to expand...
Click to collapse
Hey I got it working. Went back to magisk 24.3.
Was checking recovery option box before the AP patching as advised because no Ramdisk but a friend told me not to check recovery anyway and I successfully rebooted twice and now have root and Zygisk.
Thanks for your input!