Related
Hello guys,
I'm experiencing a problem which is NOT good.
I have netflix on my LG P990 and on my PS3. Somedays ago, I've noticed that netflix was kinda lag but only on P990. So I decided to check this out.
The problem has been found: When I connect a HDMI cable to my TV and to LG P990, the wi-fi connection speed drops a LOT. I've been testing with Solid Explorer to check the transfer rate.
With NO HDMI cable connected, I got around 1.5MB/s, at the exactly moment I plug the HDMI cable, it reduces to 200KB/s or less. Sometimes it stops the transfer.
Then, when I unpplug the cable, it starts to go faster again! I've already tested 3 different ROMs: MIUI, CM7 Official and NovaHD ICS (all with FULL wipe) and the problem has been detected on all of 3 ROMs.
Is there anything I can do to solve this problem? I really like Netflix, and would like to use it on my P990 on HDMI cable.
Thank you guys!
did you try another HDMI cable?
Not yet. I will try to get another cable with my cousin to check this out. BUT, I don't think it's the cable. Thanks for you answer.
May I suggest you try this on the official LG 2.3.4 rom too? With full wipe of course.
Could be a bandwidth issues but i think its probably a poor cable.
..
How did you get netflix working with nova hd? I've never managed to get it to work on current ics roms !
aMpeX said:
did you try another HDMI cable?
Click to expand...
Click to collapse
Yes, I did. Tested today and got the same problem. I tested with an original SonyEricsson's Micro HDMI cable from a Xperia, and got the same.
Already tested it on another TV with HDMI and got the same.
heavencanwait said:
May I suggest you try this on the official LG 2.3.4 rom too? With full wipe of course.
Click to expand...
Click to collapse
I don't know how to get it back (and I don't think it's good ideia to go back to Stock ROM, cause this ROM is really slow )
Are there any other options?
eraldo said:
Could be a bandwidth issues but i think its probably a poor cable.
Click to expand...
Click to collapse
I'm pretty sure it's not a bandwith problem. I started a file transfer without HDMI cable connected and got 1.5~1.7MB/s. From the moment I connect the HDMI, after 3 seconds, It's already in 40KB/s and then I unplugged the cable, got 1.5~1.7MB/s again.
bugeyes said:
How did you get netflix working with nova hd? I've never managed to get it to work on current ics roms !
Click to expand...
Click to collapse
I don't have it on Nova HD. I mentioned nova HD beacause I used it to test HDMI on Wi-FI. I use it on MIUI (GB) or CM Gingerbread ROMs
Hey guys,
after some Google search and reading a LOT of stuff, just figured out how to solve or at least get a better wi-fi speed when HDMI is connected.
I've read something about router's configuration on wireless settings could be possibly wrong.
I just logged into my router and chaged the wireless channel from 7 to 1 and eureka! Got it now. Just watched a netflix video without lag and in HD.
Seems HDMI connection when on, still causes some interference on wi-fi, but it's MUCH better now.
Tested with some file transfers as well, and got almost the same speed as without the HDMI connected. Sometimes I get the same speed on both cases.
If I have enough time on these days, I'll test with different channels.
Ps.: Channel 1 worked for me but maybe it's just on my case. Possibly you will have to check different channels on your network.
It's p990 hardware problem
if you plugged HDMI cable and connected to TV, WiFi speed drops very low almost zero
but sometime it works just fine, most of time not,
confirmed this on stock rom and CM7
using CM10 now, haven't tried yet, I think it would be the same.
Hi there....
Picked up a Nook HD the other night. Got ADB going and sideloading but haven't rooted as yet.
One of the Apps I'm using connects to a Bluetooth GPS puck (Nokia LD-3W). I can pair the device (shows as paired but not connected after pairing/pin is completed).
The problem is that the connection can be established to the puck about 1 in 35 attempts. Once the connection is up and running the data transfer (position) is OK so that proves that the connection can work.
I've got ADB up and running and examined the logcats for the pairing and connection process. I can't really tell anything meaningfully different between a failed and good connection aside from a bluetooth message that the device state is connected on a successful connection.
Can anybody give me some pointers on further steps to diagnose the problem? Happy to post logcats as needed......
Thanks,
John.
matthewsjl said:
Hi there....
Picked up a Nook HD the other night. Got ADB going and sideloading but haven't rooted as yet.
One of the Apps I'm using connects to a Bluetooth GPS puck (Nokia LD-3W). I can pair the device (shows as paired but not connected after pairing/pin is completed).
The problem is that the connection can be established to the puck about 1 in 35 attempts. Once the connection is up and running the data transfer (position) is OK so that proves that the connection can work.
I've got ADB up and running and examined the logcats for the pairing and connection process. I can't really tell anything meaningfully different between a failed and good connection aside from a bluetooth message that the device state is connected on a successful connection.
Can anybody give me some pointers on further steps to diagnose the problem? Happy to post logcats as needed......
Thanks,
John.
Click to expand...
Click to collapse
Try using the BluetoothGPS app from the Play store. Also enable mock locations.
hwong96 said:
Try using the BluetoothGPS app from the Play store. Also enable mock locations.
Click to expand...
Click to collapse
BluetoothGPS won't install as it states that it's missing a shared library. I've installed one of the other BT-GPS tools and that hasn't rendered any success.
I've had mock locations on/off and it hasn't made the magic difference either.
John.
matthewsjl said:
BluetoothGPS won't install as it states that it's missing a shared library. I've installed one of the other BT-GPS tools and that hasn't rendered any success.
I've had mock locations on/off and it hasn't made the magic difference either.
John.
Click to expand...
Click to collapse
Have you tried Copilot app?
hwong96 said:
Have you tried Copilot app?
Click to expand...
Click to collapse
I'm not after car navigation.
The connection sometimes works from a BT GPS puck but most times the Nook just doesn't connect.
John.
matthewsjl said:
I'm not after car navigation.
The connection sometimes works from a BT GPS puck but most times the Nook just doesn't connect.
John.
Click to expand...
Click to collapse
Hmmn. Maybe it's my GPS puck that isn't behaving correctly. I had another device and that connected and was rock steady.
More investigation required!
John.
Try it using the sdcardCM10 ROM instead of the stock/sideloaded/rooted nook OS.
r1c47 said:
Try it using the sdcardCM10 ROM instead of the stock/sideloaded/rooted nook OS.
Click to expand...
Click to collapse
I'd love to - but I haven't seen a CM10 SD release for the Nook HD - only the HD+.
John.
Download: https://play.google.com/store/apps/details?id=org.bramantya.stopcharging&hl=en
*** ROOT REQUIRED ***
Bored with various apps that make your phone charge faster?
Want to stop charging your phone's battery when connected to USB?
You are a developer that often connect their phone via USB and don't want the battery to suffer?
Disable USB Charging will disable usb charging (obviously..). Allowing you to connect your phone via USB without straining your battery again and again and again.
---
Please mention your Android version or custom ROM if it's not working for you. Thank you.
orangpelupa said:
Download: https://play.google.com/store/apps/details?id=org.bramantya.stopcharging&hl=en
*** ROOT REQUIRED ***
Bored with various apps that make your phone charge faster?
Want to stop charging your phone's battery when connected to USB?
You are a developer that often connect their phone via USB and don't want the battery to suffer?
Disable USB Charging will disable usb charging (obviously..). Allowing you to connect your phone via USB without straining your battery again and again and again.
---
Please mention your Android version or custom ROM if it's not working for you. Thank you.
Click to expand...
Click to collapse
Is it only for Nexus 6? Asking since it is filed under nexus or us it for all devices
Great App, working on my Oneplus 3 with rooted Stock Rom. Glad I found it and thank you for your effort!
orangpelupa said:
Download: https://play.google.com/store/apps/details?id=org.bramantya.stopcharging&hl=en
*** ROOT REQUIRED ***
Bored with various apps that make your phone charge faster?
Want to stop charging your phone's battery when connected to USB?
You are a developer that often connect their phone via USB and don't want the battery to suffer?
Disable USB Charging will disable usb charging (obviously..). Allowing you to connect your phone via USB without straining your battery again and again and again.
---
Please mention your Android version or custom ROM if it's not working for you. Thank you.
Click to expand...
Click to collapse
Just curious and trying to learn here, why would anyone not want their phone to charge when plugged into USB, and how does doing so strain the battery?
JimSmith94 said:
Just curious and trying to learn here, why would anyone not want their phone to charge when plugged into USB, and how does doing so strain the battery?
Click to expand...
Click to collapse
The answer for that is very long. But here's the short version :
To keep the battery from staying at max capacity for a long duration.
The very detailed explanation I think available at batteryuniversity website.
Btw nowadays I used this to keep my phone from overheating though.
Especially useful when I connect it to computer like a whole day with the screen always on. Like this last few weeks when I'm developing Twitter chat for Pokémon go https://play.google.com/store/apps/details?id=org.bramantya.gochat
It use GPS all the time, screen on all the time and switching back and forth with pokémon Go. My adb catlog filled with overheats errors
So this app stops the charging so my phone not as hot.
About the compatibility. My target is to make this work for all devices but currently it doesn't
Right now still working to make it work on Samsung.
Been looking for something like this for long time.....
Can you please get it to work on photon q (carbon KK rom)?
Hey awesome app. It works on my phone. Now i don't have to worry no more when tethering via usb. However, I do wish you can implement sort of auto enable or disable when battery reach at certain level. That would be even better.
hello, is it now working with the Samsung S7 with Android 7 ?
"Disable ADB USB Charging ROOT* not working in my rooted alcatel pop c7 7040E, android 4.2.2 Jellly Bean
is there any other way/s to disable usb charging?
I can confirm it's working on my Oneplus 3T. You should make a thread in a general forum. Great work!
orangpelupa said:
Disable USB Charging will disable usb charging (obviously..). Allowing you to connect your phone via USB without straining your battery again and again and again.
Click to expand...
Click to collapse
Does it modify /system in any way?
I'm trying to keep OTAs alive.
P.S. Using Magisk systenless root.
Edit
Nevermind, it doesn't.
Does it work with
- Xiaomi Redmi Note 4 Snapdragon 625 version?
- Xiaomi Mi Max / Mi Max 2
- Samsung Galaxy S7 Nougat
Installed.
Feedback: Didn't work on Nexus 6 LinageOS 14.1.
Working on my sm-t713 on Lineage OS 14.1.
And as i said on the play store, i'll get premium version if there is a widget to disable charging in it !
OldUncle said:
Installed.
Feedback: Didn't work on Nexus 6 LinageOS 14.1.
Click to expand...
Click to collapse
Now it works!
Not working on Moto Z Play - Stock Nougat 7.1.1
Enviado de meu XT1635-02 usando Tapatalk
I've searched the last two days for a solution to prevent charging while connected to a PC. Google is full with discussions, but all are from 2011 to 2014.
But today I found this xD and it Works with my rooted Xiaomi Mi Max 2 with Global MIUI 9 7.11.6
Great app, works on N6, Pixel XL, and Pixel 2 XL. As many know, this app is a lifesaver for DJI remotes. If you have a quadcopter and use the remote via OTG (e.g., Mavic Pro), the phone will drain the remote faster. This app solves the problem.
@orangpelupa, great work! Does the app use console commands to disable/enable charging? If yes, what are they? I would like to automate/script the process if possible. I would still be glad to buy the pro version.
snovvman said:
Does the app use console commands to disable/enable charging? If yes, what are they? I would like to automate/script the process if possible. I would still be glad to buy the pro version.
Click to expand...
Click to collapse
Here is info if you have Tasker or other scripting tool. You can set it up so when DJI Go runs, it will disable charging and when it exits, charging is re-enabled.
https://stackoverflow.com/questions/30731921/how-to-disable-battery-charging-during-adb-connection
What features does the pro version add? Would love a widget.
I've tried three Roms (2 Oreo and 1 nougat) and I can't get Android Auto to work with any of them. Has anyone gotten Android Auto to work with any of the Roms available here?
Sent from my Nexus 6 using Tapatalk
It has worked well for me on the latest 7.1.2 Pure Nexus ROM. I am currently running AICP Oreo and it works great. It also worked on S.I.X. ROM Oreo and Republic of Madness Oreo ROMs for me.
What issues are you having?
Hi, I've been running Android Auto perfectly with Nitrogen OS until 2 weeks. Suddenly I can't connect my N6 correctly anymore. My car (Ford with SYNC system) tells that it can"t find Android Auto. I tried Stock version of N6 Nougat, S.I.X Oreo rom and same issue..
Could it be related to some app update (maps, google, AA,...) ?
Sometimes I get a red error screen from AA app telling me about "communication error code 17" but I can't find any reference about that anywhere.
any tip ?
imaGine00 said:
Hi, I've been running Android Auto perfectly with Nitrogen OS until 2 weeks. Suddenly I can't connect my N6 correctly anymore. My car (Ford with SYNC system) tells that it can"t find Android Auto. I tried Stock version of N6 Nougat, S.I.X Oreo rom and same issue..
Could it be related to some app update (maps, google, AA,...) ?
Sometimes I get a red error screen from AA app telling me about "communication error code 17" but I can't find any reference about that anywhere.
any tip ?
Click to expand...
Click to collapse
Have you tried a different cable? I had to try 3 of them before it worked right to start with in my F150
some premium Anker cable fromage Amazon is supposed to arrive any Time soon but I have doubts because I already tried with different cables. What is your setup? AA, Google and maps version ?? Thanks
imaGine00 said:
some premium Anker cable fromage Amazon is supposed to arrive any Time soon but I have doubts because I already tried with different cables. What is your setup? AA, Google and maps version ?? Thanks
Click to expand...
Click to collapse
AA - 2.7.573953-release
Google - 7.15.19.21.arm
Waze - 4.32.0.2
I don't use google maps anymore now that Waze is available for AA.
One thing that may work is to delete your phone out of Sync and delete Sync out of your phone both under bluetooth and AA. Once you have them removed. Just plug the phone into sync and let it re-setup everything (I don't even pair bluetooth separately, I let AA do the bluetooth pairing).
What version # of Sync3 do you have?
AAuto works great on my N6 with LineageOS on my Kia Sportage. It's a brand new 2018 Kia purchased two days ago. One of the main reasons for that purchase was AAuto in the electronics package.
bfmetcalf said:
AA - 2.7.573953-release
Google - 7.15.19.21.arm
Waze - 4.32.0.2
I don't use google maps anymore now that Waze is available for AA.
One thing that may work is to delete your phone out of Sync and delete Sync out of your phone both under bluetooth and AA. Once you have them removed. Just plug the phone into sync and let it re-setup everything (I don't even pair bluetooth separately, I let AA do the bluetooth pairing).
What version # of Sync3 do you have?
Click to expand...
Click to collapse
pairing bluetooth with AA didn't work after deleting Sync and phone config :/
Sync continue to say it can't reach AA.. still waiting for the new anker microUSB cable
And I got same app version installed too
here 's my sync version
imaGine00 said:
pairing bluetooth with AA didn't work after deleting Sync and phone config :/
Sync continue to say it can't reach AA.. still waiting for the new anker microUSB cable
And I got same app version installed too
here 's my sync version
Click to expand...
Click to collapse
Try clearing data for AA and see if that helps.
Still can't get it to work in a 2017 Chevy Tahoe. I have now tried 4 different cords and I am currently on Six Oreo Rom. I know the head unit is compatible since I had it working with the pixel 2 xl during the brief time I had that phone.
Do I need to change any settings such as USB debugging? What setting should I set it to when I connect the cord (i.e. Transfer Files, etc)?
Sent from my Nexus 6 using Tapatalk
Negotiator50 said:
Still can't get it to work in a 2017 Chevy Tahoe. I have now tried 4 different cords and I am currently on Six Oreo Rom. I know the head unit is compatible since I had it working with the pixel 2 xl during the brief time I had that phone.
Do I need to change any settings such as USB debugging? What setting should I set it to when I connect the cord (i.e. Transfer Files, etc)?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Try going into settings > six settings > Other > look for Enable MTP instead charging when connect to PC
Make sure that is UN-ticked. That will block AA from working for some reason.
bfmetcalf said:
Try going into settings > six settings > Other > look for Enable MTP instead charging when connect to PC
Make sure that is UN-ticked. That will block AA from working for some reason.
Click to expand...
Click to collapse
This did the trick!! Thank you so much!
Sent from my Nexus 6 using Tapatalk
bfmetcalf said:
Try going into settings > six settings > Other > look for Enable MTP instead charging when connect to PC
Make sure that is UN-ticked. That will block AA from working for some reason.
Click to expand...
Click to collapse
woooooh that did the trick ! Thank you !!
I use it with crDroid 4.0 Beta 6 and everything work ...
Tech site says that Chromecast with Google TV got Android 12 update. Has anyone received?
Android 12 arrives on the two-year-old Chromecast with Google TV
Adding new playback, privacy, and security settings.
www.theverge.com
Yes, i have installed yesterday.
The frame rate switch is working fine with Mavens Kodi.
But i have experienced a few bad things as well.
I wasn't able to figure out how to install unknown sources apk files anymore.
There is no option for that.
I have experienced some performance issues as well (e.g. if i jumped chapter in Kodi it wasn't capable to follow things, (delay in audio etc), but this can be just cache setting issue).
Streaming apps:
Netflix - no frame rate switch
HBO Max - no frame rate switch and some reason no Dolby Vision either (sending out as HDR).
I don't see that smooth the system as i expected to be.
Google assistant not executing commands on my device after update.
zenowaren said:
Google assistant not executing commands on my device after update.
Click to expand...
Click to collapse
I don't use that, so i am not sure if it is working for me.
Maybe you should do a hard reset or just reset the google assistant?
But i figured out how to install Unknown sources, just needed to grant Always allow storage permission for the file manager what i use (in this case x-plore) and i can see the APKs now
I just wanna share this info. If anyone using this device with a third party ethernet adapter and using vpn with wireguard app...
This firmware update will break your wireguard app usage. You would not be able to establish a connection. Activating one of peers in your wireguard app will disconnect the ethernet. Youd get a notification "VPN is connected" then youll received another notification after few seconds "Network connection lost". Your ethernet setting will disappear in the CCwGTV setting. Ethernet setting will return back once you deactivate the peer connection in WireGuard App.
Connection via Wifi with Wireguard App is not affected though with the firmware update. Its still works. You can establish wireguard connection with wireguard app.
Idk if this is a bug in the firmware update for those using ethernet adapters. I have not test the official google ethernet adapter so i can not fully say that too is affected, but im 100% sure third party ethernet adapter of CCwGTV are affected.
So if youre using ethernet adapter with CCwGTV and utilizing Wireguard app to establish VPN... you need to stay away from this update. Or else you gonna connect thru wifi to get the wireguard app working.
guys i have problem on this latest it can't my flash drive while i'm using my usb hub , any idea to revert back to android 10 ?
I experienced zero performance development. Same glitches, issues.
Some aps doesn't work. Simply can't open. Others take ages to start.
It was bad now worst.
Hdmi loses connection every minute . (I switched color format to Ycbcr 4.4.0, it seems fine now).
How to downgrade? or I will sell. Because this device is not better in terms of performance then my old 2017 LG TV software.
stupid update it doesn't read my flash drive while using my usb hub to expand it storage
ctorbaoglu said:
I experienced zero performance development. Same glitches, issues.
Some aps doesn't work. Simply can't open. Others take ages to start.
It was bad now worst.
Hdmi loses connection every minute . (I switched color format to Ycbcr 4.4.0, it seems fine now).
How to downgrade? or I will sell. Because this device is not better in terms of performance then my old 2017 LG TV software.
Click to expand...
Click to collapse
the whole experience of the new update made the ccwGTV crawl. I notice lagginess after the update. Its kinda like what Apple do to their iphones.... Sure theyd support and keep rlsing ios update to their old iphones, but they will mess up the updat and add lagginess experience for you to ditch your old iphone to buy new iphones. Same thing is happening ccwgtv.. theyre fcking our experience with their update so we would buy their "new ccwgtv."
UNG7896 said:
stupid update it doesn't read my flash drive while using my usb hub to expand it storage
Click to expand...
Click to collapse
probably kernel of usb hub is not supported with the update. this update fckup every third party usb peripheral that exist. I have not checked mine if the usb storage is broken too, but i would not be surprise if its broken.
I have an Chromecast with Google TV 4k (model: GZRNL). It's still on Android 10 (see screenshots attached) and it's no update available. Tried resetting to factory defaults, still same issue.
asinboi said:
I just wanna share this info. If anyone using this device with a third party ethernet adapter and using vpn with wireguard app...
This firmware update will break your wireguard app usage. You would not be able to establish a connection. Activating one of peers in your wireguard app will disconnect the ethernet. Youd get a notification "VPN is connected" then youll received another notification after few seconds "Network connection lost". Your ethernet setting will disappear in the CCwGTV setting. Ethernet setting will return back once you deactivate the peer connection in WireGuard App.
Connection via Wifi with Wireguard App is not affected though with the firmware update. Its still works. You can establish wireguard connection with wireguard app.
Idk if this is a bug in the firmware update for those using ethernet adapters. I have not test the official google ethernet adapter so i can not fully say that too is affected, but im 100% sure third party ethernet adapter of CCwGTV are affected.
So if youre using ethernet adapter with CCwGTV and utilizing Wireguard app to establish VPN... you need to stay away from this update. Or else you gonna connect thru wifi to get the wireguard app workin
Click to expand...
Click to collapse
I don't suppose you've found a fix for this other than using WiFi? I use Windscribe and even with other protocols I have the same problem through wired connection on my hub. Vpn connects then network disconnects. Very frustrating!
google devs/guys could fix this problem if only anyone know where you can report this bug to official google forum for chromecast with google tv but idk where that is.
I tried posting here so anyone experiencing can see this and people can report it to google devs who are here in this forum, but i guess no devs has caught this yet it here or experiencing the problem...im pretty sure it would be fix if "someone" who know guys in google and brought this at their attention
Hi, or is it possible to downgrade ?
I can't install APK or map button for exemple.
This device loses a lot of its interest now, for me.
idk. never tinker with firmware of chromecast gtv before, but this is android device so if youve been rooting or downgrading with android before, i guess its the way as this with the device.
worst scenario that you can remedy this problem is buy another one ccwgtv the 4k version and dont upgrade to the latest firmware one. And disable the auto update. to prevent force upgrade from google...block the url of firmware update with pihole or similar dns blocking to keep google away from updating your device wo your consent.
zenowaren said:
Tech site says that Chromecast with Google TV got Android 12 update. Has anyone received?
Android 12 arrives on the two-year-old Chromecast with Google TV
Adding new playback, privacy, and security settings.
www.theverge.com
Click to expand...
Click to collapse
I have received the update and I hate it... A lot of the functionality I was used to that was present before the update occurred such as accessing directory paths w/in apps has been neutered. Also, the sound effects like when you toggle w/in the OS or when you select OK to open an app are ruined and there's noticeable crackling/pop. Now I'm actively searching for a way to root the device and to revert the update back to Android 11 or Android 10.
Janaboy82 said:
Yes, i have installed yesterday.
The frame rate switch is working fine with Mavens Kodi.
But i have experienced a few bad things as well.
I wasn't able to figure out how to install unknown sources apk files anymore.
There is no option for that.
I have experienced some performance issues as well (e.g. if i jumped chapter in Kodi it wasn't capable to follow things, (delay in audio etc), but this can be just cache setting issue).
Streaming apps:
Netflix - no frame rate switch
HBO Max - no frame rate switch and some reason no Dolby Vision either (sending out as HDR).
I don't see that smooth the system as i expected to be.
Click to expand...
Click to collapse
Ik you can get to the page to allow unknown sources but you need to download "send to my TV" on CC with GTV and on another android device or I assume could work if Ios has the app and install it on there also on same wifi network. Transfer an apk file to the CC with GTV click to install it from that app and it will bring a prompt up saying needing to allow from unknown sources. Click yes and it will bring you to the she setting for it like your use to seeing before this update. Worked that way for me then I could choose what to allow to install. I assume maybe if you Transfer a file manager (a certain one like this one thay brought the prompt up) you might be able to bring up the setting page on CC w/ GTV to allow Access to file directories best luck all.
This worked for me for what I needed to do so I don't need to get into the directories.
pjcman2001 said:
Ik you can get to the page to allow unknown sources but you need to download "send to my TV" on CC with GTV and on another android device or I assume could work if Ios has the app and install it on there also on same wifi network. Transfer an apk file to the CC with GTV click to install it from that app and it will bring a prompt up saying needing to allow from unknown sources. Click yes and it will bring you to the she setting for it like your use to seeing before this update. Worked that way for me then I could choose what to allow to install. I assume maybe if you Transfer a file manager (a certain one like this one thay brought the prompt up) you might be able to bring up the setting page on CC w/ GTV to allow Access to file directories best luck all.
This worked for me for what I needed to do so I don't need to get into the directories.
Click to expand...
Click to collapse
You can choose to install from unknown sources when you activate developer mode, but you already knew that I presume lol
Can I root with the old way on the latest update or would that brick it?
I am unable to use USB C Hub with my Google Chromecast 4k. Only PD USB C port is working. 3.5mm audio jack output, card reader and USB storage is not working. Kindly suggest.
https://www.amazon.in/Voltem-Aluminium-Multiport-Transfer-Charging/dp/B09YK1BH5J?ref_=ast_sto_dp