{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OFFICIAL HOME OF BIONIX AND TEAM WHISKEY
http://board.teamwhiskey.com/index.php
http://www.teamwhiskey.com/
http://webchat.freenode.net/
irc.freenode.net / #teamwhiskey
As Bionix NS 1.3 is a Beta release, keeping 1.2 links live as well.
There is a optional Trinity UV kernel that can be flashed if so desired.
Flash the kernel after confirming the rom works for you.
Thanks!
Bionix NS 1.3
- Update to 2.3.2
- Minor init changes
- Known Issue: Reboot option needs to be fixed
Bionix NS 1.2
- Updated busybox 1.17.1 > 1.18.1
- Updated Rom Manager 3.0.0.0 > 3.0.0.6
- Modified minfree handler - aggressive > strict
- Init script modified - line by line > loop format
- changed system to write instead of read only
- Modified certain permissions
- Rearranged order of specific mounts
- superuser delay should be fixed
Bionix NS 1.1:
- Fixed busybox - symlinks working correctly
- Fixed /data mount
- Removed flash (install manually from market and reboot once)
- Adjusted build.prop for trinity kernel support
- Added additional modules for trinity kernel support
Bionix NS 1:
- Based off GRH78 OTA (android 2.3.1)
- Busybox
- su/superuser/root
- Non-secure boot.img for adb remount
- curios ext4 optimizations mounted on boot
- Video Player (must select software decoding)
- Partitions mounted from relatime>noatime
- adb remount/adb push/adb pull working
- IO scheduler set to deadline on boot
- Memory handler set aggressive on boot
- Custom init script
- auto zipaligned on boot
- file manager included
- Pre-installed RomManager
Installation:
This rom DOES NOT wipe your data partition by default. However, you MUST wipe data if you installing this rom for the first time. You will not have to wipe with future updates assuming you are still using this rom.
1. Load 'bionix-ns1-signed.zip' on your sdcard
2. Reboot phone into clockwork recovery
3. wipe data if this is your first time installing, if you already have it installed, you do not have to wipe data and can move to step 4.
4. Select zip from sdcard
5. Select 'bionix-ns1-signed.zip'
6. Install and wait for it to finish flashing
7. Reboot phone
Download:
Bionix NS 1.3 w/ stock kernel MD5: 9f722f758bbd0709768ce2f1b07aa1b6
Optional Trinity Vmax OC Kernel MD5: 6b96498a30d0c09bb2c2f9583a1f0dc7
Note: Optional UV Kernel will return after a little refreshing work is done.
TRINITY NOTES:
- Trinity Vmax v1.1 w/ 1.2, 1.3, 1.4, 1.5, 1.6 GHz Pick the highest your phone can run stable
- voltage modifications
- BT working. Confirmed
- root rights issues fixed
- no bfs for now
- sleep fix by coolbho3k (allows screen off profiles below 800mhz)
- voodoo sound by supercurio (need i say more?)
- build system tweaks
For additional information regarding the trinity kernel, please visit Morfic's original trinity thread located here:
http://forum.xda-developers.com/showthread.php?t=893851
Picture 1 listed below - Quadrant score w/stock kernel running my modifications (2d/3d scores are 0 because quadrant does not currently support these tests for the Nexus S, its crashes)
Picture 2 listed below - Quadrant score w/trinity kernel running my modifications (2d/3d scores are 0 because quadrant does not currently support these tests for the Nexus S, its crashes)
Very cool! Flashing now.
I took a peek at your team's work on the Vibrant forums when you popped up over here to get an idea at what we could hope to see. Very impressive. (Also sticking it to a certain not-to-be-named kangster always wins cool points with me. )
EDIT: Everythings working great! Man this sucker is fast, I noticed it straight away.
Nice testing now...keep up the good work
Nice to see first roms rollin
Is the OC kernel included in your rom?
THANK you! Testing!
I forgot to ask. Do we need to have voodoo enabled when we flash just like the tech demo??
it is already enabled in the rom
Ok thanyou
is 1.2ghz oc kernel included?
"(morfic and I are still working on the OCed kernel, once it is stable we will upload it)"
lralexl said:
"(morfic and I are still working on the OCed kernel, once it is stable we will upload it)"
Click to expand...
Click to collapse
Silly me
Thanks for clearing!
RinTinTigger said:
is 1.2ghz oc kernel included?
Click to expand...
Click to collapse
sombionix said:
Picture 2 listed below - Quadrant score w/1.2Ghz kernel w/my modifications (morfic and I are still working on the OCed kernel, once it is stable we will upload it)
Click to expand...
Click to collapse
^^^^^^^^^^^^^^^^^^
ye ye ... i got the point
stupid stupid me
RinTinTigger said:
ye ye ... i got the point
stupid stupid me
Click to expand...
Click to collapse
Sorry, I wasn't trying to rub it in. I'm slow at quoting
Can you provide a cifs.ko module for your kernel?
Thanks
Is there any reason the 3D scores on quadrant (in your pics) look like tiny slivers compared to devices below it?
Also, does bluetooth work after using EXT4 tweaks?
RinTinTigger said:
Silly me
Thanks for clearing!
Click to expand...
Click to collapse
tiny change in init.rc, booting it here right now, highest nenamark yet, but i will tweak voltages tomorrow, so we get a better initial product out.
for testing, you know it's on the other thread for stock roms (you can boot it with this rom and then run the adb shell mount line from the ext4 thread, but this does not get you everything somb put in his init script)
Luxferro said:
Is there any reason the 3D scores on quadrant (in your pics) look like tiny slivers compared to devices below it?
Also, does bluetooth work after using EXT4 tweaks?
Click to expand...
Click to collapse
Because Quadrant doesn't properly support Nexus S/gingerbread on the graphics benchmarks lol. Imagine how much higher this thing would be . Just add the Galaxy S 3d and 2d benchmarks to it and that's the real score
i've followed you guys from my vibrant now here too? awesome! just got my NS today
Luxferro said:
Is there any reason the 3D scores on quadrant (in your pics) look like tiny slivers compared to devices below it?
Also, does bluetooth work after using EXT4 tweaks?
Click to expand...
Click to collapse
Currently, quadrant doesn't support 2d/3d testing for the nexus s. It crashes. I turned off those two tests.
morfic said:
tiny change in init.rc, booting it here right now, highest nenamark yet, but i will tweak voltages tomorrow, so we get a better initial product out.
for testing, you know it's on the other thread for stock roms (you can boot it with this rom and then run the adb shell mount line from the ext4 thread, but this does not get you everything somb put in his init script)
Click to expand...
Click to collapse
Yea.....everything morfic said.
Related
Download is at the Bottom of this Post
~ Gingerbread & Froyo ~
**** ANNOUNCEMENT ****
Changelogs: Changelog
SuperFast Froyo 2.0 is Out!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Froyo Optimum, SuperFast Froyo and Gingerbread Optimum
News: Now in 3 Flavours! Gingerbread Optimum Froyo Optimum and Superfast Froyo
------------------------
Gingerbread Optimum - Android 2.3.7, TouchWiz Themed, Cyanogenmod 7
Froyo Optimum - Tweak Full, All Google Apps
SuperFast Froyo - Light,Simple,Yet SuperFast
About:
The Optimum Rom's are built for Speed and Looks from Samsung's TouchWiz UI. The SuperFast Version's are Stripped and Stocked therefore They are Super Fast.
Current Version:
Gingerbread Optimum V1.0
Froyo Optimum V6.0
SuperFast Froyo V1.0
Changelog For Gingerbread Optimum
Code:
N/A
Changelog for Froyo Optimum v6.0
Code:
- BFS
- New v20D kernel
- Touch Cal should work.
- Faster Overall Performance
Changelog for SuperFast Froyo 2.0
Code:
- BFS
- Simple I/O
- Faster Performance
- Improved Battery Life
(!) I recommend you Do to overclock to 1000mhz. Very Lucky few can get to 900 mhz
Gingerbread Optimum Screens
Froyo Optimum Screens
-------------------------------------------------------
Optimized for more RAM Faster Odexed of Froyo
I get 90-100mb ram free | The most free Ram I've ever gotten is 112mb. The Phone was feeling Quick
Click to expand...
Click to collapse
----------------------------------------
Download at Bottom
-------------------------------------------
What is Working
Code:
- Wifi
- GSM(2g/3g)
- 3D
- Sensors (Accelerometer for UI Rotate)
- GPS
- Installing apps to SD
- Camera
- Bluetooth
- Bluetooth Headset
- Multi Sdcard Partition Support
- Screen Calibration (Froyo Optimum Only)
- Notification Toggles in Status Bar.
- Swap
- Wireless Tethering (Gingerbead Optimum Only
----------
What Isn't working:
Code:
- Full Flash
- Wireless/Usb Tethering (Froyo Optimum
- FM Radio
----------
Plans and Fixes for Future Version:
Code:
- Haptic Feedback
- Wireless Tethering Natively
----------
Current Version Bugs (Both Rom's)
Code:
- Play/Pause on BT headset apparently not working
Screenshots for SuperFast Froyo 1.0
Downloads
Current Versions
Gingerbread Optimum 1.5
Froyo Optimum 7.0
SuperFast Froyo 2.0
Previous Versions
Code:
[URL="http://www.4shared.com/file/01Y-tqR4/froyo-optimum-backup.html"]Froyo Optimum 4.55 Touchwiz UI 4.0Update[/URL]
[URL="http://www.mediafire.com/?xvf5dq69fx8s3s3"]Froyo-Optimum-5.0-BFS-speedy[/URL]
[URL="http://www.mediafire.com/?by152s91f8jvfil"]Froyo Optimum v4.5 for Recovery[/URL]
[URL="http://www.mediafire.com/?c2629o4h2lo22ih"]Froyo Optimum v4.0 for Recovery[/URL]
[URL="http://www.mediafire.com/?uf66a91i9c5dccs"]Froyo Optimum 6.0 (Zip install)[/URL]
[URL="http://www.mediafire.com/?dmumgi6obodvsir"]SuperFast Froyo Light v1.0 for Recovery[/URL]
[URL="http://www.mediafire.com/?0rb3b97lt9p00cm"]Gingerbread Optimum 1.0 (Recovery)[/URL]
How To Install
FASTBOOT
Code:
- Unzip the files and put it where your ADB & Fastboot are:
- Open CMD with administration rights
-then write this:
fastboot -w
fastboot flash boot boot.img
fastboot flash system system.img
fastboot reboot
RECOVERY/BACKUP
Code:
- Unzip the folder.
- Mount your PHONE and put the folder into SDCARD/clockworkmod/backup
- Unplug your PHONE and reboot it into recovery.
- After that, go to “backup and restore / restore / select your copied backup file”
- After it installs it, select “reboot system now”
RECOVERY/INSTALL ZIP
Code:
- Copy the zip in the root of your SDCARD.
- Reboot the phone into recovery.
- Go to “install zip from sdcard / choose zip from sdcard / select your copied zip file”
- After it installs it, select “reboot system now”
----------------
Thanks to:
Mikegapinski for BFS
PcFighter for .29 Kernel
Mur4ik
----------------
As the rom has been ODEX'D It can't be themed.
Please Post Bug Reports! -----------------
Quick question, why did you base it on 2.2 when 2.3.3 CM7 is in much more finished state?
Sent from my GT540 using XDA App
Maybe some more specs?
Joost
Prefer the look of froyo
Basically I prefer the 2.2s look
joostvhoek said:
Maybe some more specs?
Joost
Click to expand...
Click to collapse
Its just like openswift but odexed and it seems faster then 2.3 (my opinion) we also get morre free ram, bout 70-100mb
do all the function work(native wifi tether)?
Yeah
Its still really fast, everything works
Is the battery good in this ROM?
dewide said:
Is the battery good in this ROM?
Click to expand...
Click to collapse
Yeah it is, i topped 3 and a 1/2 days with it
hmmm interesting has someone else test it? does this support partitions on sdcard? mount / unmount working correctly?.
lavero.burgos said:
hmmm interesting has someone else test it? does this support partitions on sdcard? mount / unmount working correctly?.
Click to expand...
Click to collapse
The mount/unmount for usb storage? Works better then Swiftdroid
airbus360 said:
The mount/unmount for usb storage? Works better then Swiftdroid
Click to expand...
Click to collapse
Ok and does it supports partitions on sdcard?
Sent from my GT540 using XDA App
lavero.burgos said:
Ok and does it supports partitions on sdcard?
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
Yeah, its a openswift rom
That rom isnt a fake Quarx rom?
mod: too late 4 april fool, i think...
Test it with qudrant advanced. If the result is around 900 without overclock then it must be 2.2 . If the result is around 400 then it must be Fake quarx...
i dont get it. some things didnt work on openswift did you fix all that?
pashinator said:
i dont get it. some things didnt work on openswift did you fix all that?
Click to expand...
Click to collapse
Its based on openswift 4.5, all i done is odexed it to make it faster and have more free ram.
Nice job.
It's a shame that 4.5 was missing the fixes Quarx made in 4.4...
Are you looking to develop the code or was odexing all you wanted to do?
airbus360 said:
Its based on openswift 4.5, all i done is odexed it to make it faster and have more free ram.
Click to expand...
Click to collapse
SD card not mounted with EXT partrition. please Fix thanks.
fishears said:
Nice job.
It's a shame that 4.5 was missing the fixes Quarx made in 4.4...
Are you looking to develop the code or was odexing all you wanted to do?
Click to expand...
Click to collapse
I am looking to develop it further. I'm still only learning using Linux. It would be great if someone can help.
::Welcome to LG Optimus 2x SwiftExtreme Custom Rom::
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What's in the ROM :
-New Looks(smaller fonts, less icon theme applied), AOSP lockscreen as default
-Default overclock 1,2Ghz
-Optimize Almost ALL PNGs in /system/app to make less memory footprint
-Include Gtalk with Front Camera Video Support(thanks for Rusty!) works fine, just try add [email protected] if you want to test your talk video call
-Include latest Goolge Maps 5.10
-Zipalign, PRE-ODEX /system/app
-Include GPS fix based on Topogogi & trapacska services.jar fix
-Include Camera mod apk AndiCP
-Include Add Reboot option trapacska
-EXT4 in /system and /data and optimization mount options
-EXT3 in /cache and optimization mount options
-Include patched sqlite, to quadrant hack
-Include dexopt-wrapper if you need to ODEX your files
Removed :
-Some Livewallpaper
-AppAdvisor
-Livewallpaper->Move to /data/app
-PolarisOffice->Move to /data/app
-Bash binary from previous version
Pre-requisite Installing :
1. Do nandroid first!
2. Make sure you have at least 200MB in /data partition -> will be used by ROM for temporary ODEX processing..
About this ROM :
1. This ROM comes with PRE-ODEX /system/app, it means, it will ODEX after boot for first time.
2. If you want to modify some APKs inside /system/app, make sure /system/apps size not bigger that 115MB, above that size, there is probability ODEX process get failure, and your OS get mess...
3. On first boot after installing, around 3 minutes after first boot, your lovely LG Optimus 2x will get sluggish, so, I recommend you not anything. Just let the phone do ODEX process for while(usually takes less than 5 minutes), after that your phone will reboot
4. On second boot, the system will recognized all ODEX and new optimized APKs inside /system/apps, and for my recommendation, after you get lockscreen, just reboot again
5. On third boot, all system apks already recognized fine by operating system
6. Enjoy it...
SwiftExtreme-v1.1 ROM : http://www.mediafire.com/?n2ajzl8n87oouj8
Update:
Fix Bluetooth Transfer Problem(Apply this after you have full ODEX ROM with CWM)
http://www.mediafire.com/?gez2jivjaj7mv1e
Kernel 1.2Ghz : http://www.mediafire.com/?ibuc8c8y3y61fcl
Kernel 1.4Ghz : http://www.mediafire.com/?o4uc5dvldv58ymh
Click to expand...
Click to collapse
What this SwiftExtremeROM-v1 has ???
-My Own Framework flavor using UOT kitchen, Overclock upto 1.2Ghz as default, ODEX, Built in Headphone Boost Script, Bash 4.0, Busybox 1.72 as standard, EXT4 in /system and /data and optimization mount options, EXT3 in /cache and optimization mount options, Include patched sqlite, to quadrant hack, Include dexopt-wrapper if you need to ODEX your files
Links
http://www.mediafire.com/?olch9j5uept1ta3
SwiftExtreme-GB-18092011.
Features :
-ZRAMv2 backported from 2.6.35 -> Virtually you inrease RAM capacity 512MB
-Transident Memory(Cleancache and FrontSWAP) -> Doesn't know what to do with this
-Other patches that I bring from my previous Kernel thread
http://forum.xda-developers.com/showthread.php?t=1223846 except VOODOO sound, BFQ, Simple/IO, AVP Overclock, SDRAM Overclock, TinyRCU... Going to add some of this later..
1.2Ghz version
Linkshttp://www.mediafire.com/?jseqdwb6xrrcbdp
1.4Ghz version
Linkshttp://www.mediafire.com/?lafqcecuhf11ovw
Click to expand...
Click to collapse
If you don't like the fonts, you can always replace 3 fonts in /system/fonts. They are :
-DroidSans.ttf -> usually with light/regular font type
-DroidSans-Bold.ttf -> usually with bold font type
-Clockopia.ttf -> usually same as DroidSans font
Bugs :
Please report any force close application(I can't test all APKs)
Cautions :
1. I don't provide support to implement kernel in other ROM. The reason, it may little hard for me to fix problem if the kernel doesn't compatible with other ROM.
SOURCE CODEhttps://gitorious.org/swiftextremekernel/swiftextremekernel
nice work mate can't wait =D
Almost too good to be true
Nice..
Can't wait for it's release..
Sckank said:
Almost too good to be true
Click to expand...
Click to collapse
yea, i know that.., that's why I'm really confuse..., is there a problem with those power information in LG gingerbread??? you may take a look another screenshoot when I left my android when sleeping with 3G and all sync on...(I check gmail when I wokeup, last sync is around 5am, so, I'm sure nothing wrong with the network)
Yes I think there is a problem with showing accurate battery/power information in the leaked GB for the O2x .
I'm using the Flair Rom that is based on leaked stock GB and I always only the huge jumps in my battery percentage. It stays for one hour at 95% (even under hheavy CPU load) and then rapidly (in 1min) drops to 79% (in Idle)....
Well my battery still lasts a lot longer with V20C than with CM7, so I guess with optimisations it can be done. But still, theres something not quite right.
Good job Man ! Have you activacte goverrnor ?
Sent from my LG-P990 using Tapatalk
The new kernel may be applied to the stock rom gb v20e?
it seems LG do something else with the kernel in v20e, problem like storage mount problem, init.d script load problem maybe caused by kernel. Eventhough, I'm already using latest LG v20e ramdisk to test kernel loading, it seems beyond ramdisk solution. So, unless I know what is the problem, or LG post new kernel source code, I'm going to postpone new kernel release. Releasing for v20c is not worth I think, what LG have done in v20e already great, so, I think we better need wait LG kernel source code...
Hi, me again(it's weekend now)
I've successfully make the v20e run the kernel without almost any problem. The current problem only related with v20e loading time. When I change the kernel, it seems android loading process looks like in v20c, not like in v20e. So, I'm going to check, what's the problem...
Progress :
-Fix SDCARD mount problem->like I said, LG change something, so, I need to match the device location like v20c. It can mount the storage fine right now.
-Add init.d support -> change ramdisk, so now, I can run zram again.. and offcourse somescripts..
fajarep said:
Hi, me again(it's weekend now)
I've successfully make the v20e run the kernel without almost any problem. The current problem only related with v20e loading time. When I change the kernel, it seems android loading process looks like in v20c, not like in v20e. So, I'm going to check, what's the problem...
Progress :
-Fix SDCARD mount problem->like I said, LG change something, so, I need to match the device location like v20c. It can mount the storage fine right now.
-Add init.d support -> change ramdisk, so now, I can run zram again.. and offcourse somescripts..
Click to expand...
Click to collapse
wonderful news indeed.
i've managed to fool firmware v20e when using custom kernel loading slowdown, now, custom kernel can loading fast without need to force dexopt..., ok, ready to rumble right now
Good news fajarep. It's going to be released soon then?
(BTW, I heard from GetRIL's author that there's now a v20G floating around.)
salisbury_steak said:
Good news fajarep. It's going to be released soon then?
(BTW, I heard from GetRIL's author that there's now a v20G floating around.)
Click to expand...
Click to collapse
ok, no problem, as long LG keep the way they handle custom kernel like v20e or v20c. If they change...., hmm...., need to find a way again
update : it seems, it stop force dexopt in /data/app, but, it still dexopt in /system/app..., OMG.., LG...!!!
this post is to thank you developers and our devices are better than they are, thank you very much for your free and disinterested work, greetings
Hi, i'm updating the first post
Does odex make the ROM a little laggy, as the scripts aren't run during boot?
Imperticus said:
Does odex make the ROM a little laggy, as the scripts aren't run during boot?
Click to expand...
Click to collapse
Well I don't know about laggy thing And scripts run file, I can active ZRAM
Anyone care to share screenshots for this ROM? Wondering what fajarep's UOT kitchen flavor is.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tweaked Kernel v2
Work well on 1.9.23, 1.9.30 and CM7 nightly builds. Need Feedback.
Dont forget to read review from link at bottom of post if using CM7 builds.
Features :
Original Upgraded & Latest Kernel Base & its features (with UV/OC) --> Battery Saver Kernel
Juwe's Tweak --> Best RAM optimization - best balance between free memory, multitask, speed of launching apps and system speed
Darky's Zipalign --> Zip Aligning Files
Loopy Smoothness Tweaks (On Testing) --> Smoother Response & Less Delay while unlocking, notification pulldown, etc
Voodoo Support
FFC Support (EXPERIMENTAL)
What To Expect in Next Versions :
GPS Tweaks <== Couldn't work on these for v2 since 1.9.30 came out early and FFC experimentation began.
More Optimization Scripting
Better FFC Support
Steps to follow :
Reboot in Recovery Mode.
Flash this zip file, it takes care of all.
Reboot.
> Most of the Tweaks are already added to 360 Productions Released ROMs.
> This kernel is NOT coded by me, and is only for people who would like to add tweaks with original kernel taste.
> This can be also used by those already flashed/using other Kernel and want to step to original Kernel.
> I don't take credit for this original kernel's base work.
> I just made CWM flashable (didn't found anywhere & I need badly to test different kernels' performance) and added tweaks.
> This will reset your GPS to stock! .
Tested by me ON MIUI & CM7 nightly builds. Flash on your own risk. Feedback needed.
Neither me nor 360 Productions will be held responsible if something goes wrong.
Tweaked Kernel v2: Download
Original Kernel v2: Download
Experimental (Don't Flash; BROKEN BROKEN BROKEN) :
Tweaked Kernel v2 (FFC version A): Download
Tweaked Kernel v2 (FFC version B): Download
Older Versions:
Tweaked Kernel v1: Download
Original Kernel v1: Download
Hope you read OP properly.
Changelog for Tweaked Kernel:
Code:
[B]v2:[/B]
Base Kernel Upgraded as of 1.9.30
Now has Voodoo Support
FFC Support (Experimental)
Loopy Tweak Fixed for MIUI Launcher.
[B]v1:[/B]
Base Kernel as of 1.9.23
Loopy Smoothness Tweak
Juwe's RAM script
Added Darky's Zipalign script
Tested on CM7 builds: Read Review.
NOTE: If you using MIUI SS-10, please flash Tweaked Kernel v2.
Ffc support?
Sent from my GT-I9000 using Tapatalk
mohitmoudgil said:
Ffc support?
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
NO. Not for v1.
I will see if I can add in next version.
can u please give the option for voodoo color other than that the kernal seems to fly its just when coming from another kernal the colors look like a lcd screen so its not that great
mohitmoudgil said:
Ffc support?
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
FFC Support Definitely Coming in v2.
ceoesquad said:
can u please give the option for voodoo color other than that the kernal seems to fly its just when coming from another kernal the colors look like a lcd screen so its not that great
Click to expand...
Click to collapse
Not sure for Voodoo Color.
As mentioned in OP, kernel base not coded by me.
I am learning to code kernel myself, when done voodoo profile would be available.
If you want voodoo now, please reinstall Glitch.
this is what i am looking for, thanks.
neobuddy89 said:
Tweaked Kernel v1
Features :
Original Upgraded Kernel & its features (no voodoo color profile) by Atinm --> Battery Saver Kernel
Juwe's Tweak --> Best RAM optimization - best balance between free memory, multitask, speed of launching apps and system speed
Darky's Zipalign --> Zip Aligning Files
Loopy Smoothness Tweaks (On Testing) --> Smoother Response & Less Delay while unlocking, notification pulldown, etc
What To Expect in Next Versions :
GPS Tweaks
More Optimization Scripting
FFC Support
Steps to follow :
Reboot in Recovery Mode.
Flash this zip file, it takes care of all.
Reboot.
> Most of the Tweaks are already added to 360 Productions Released ROMs.
> This kernel is NOT coded by me, and is only for people who would like to add tweaks with original kernel taste.
> This can be also used by those already flashed/using other Kernel and want to step to original Kernel.
> I don't take credit for this original kernel's work.
> I just made CWM flashable (didn't found anywhere & I need badly to test different kernels' performance) and added tweaks.
> This will reset your GPS to stock! Please confirm if its working or not for v1.
Tested by me ON MIUI not CM7. Flash on your own risk. Feedback needed.
Neither me nor 360 Productions will be held responsible if something goes wrong.
Tweaked Kernel v1: Download
Original Kernel: Download
Hope you read OP properly.
Click to expand...
Click to collapse
ok so i been using it for some hours now and its fast but seems to run warm all the time my temp has been 40.2 c and thats with the screen off i dont have data on my phone so it couldnt be that any ideas?
ceoesquad said:
ok so i been using it for some hours now and its fast but seems to run warm all the time my temp has been 40.2 c and thats with the screen off i dont have data on my phone so it couldnt be that any ideas?
Click to expand...
Click to collapse
What was your previous kernel? Did you reboot your phone again after feeling warm? I faced this same while on Glitch Kernel. The lithium build had Glitch Kernel and I wanted to switch to Atinm's build, hence this release. Everything working quite good this side.
EDIT: Here are screenshots of system info from my phone, I believe battery life to improve with calibration cycles.
some gps fix on the next build makes me excited.
and here i share you something about vibrant GPS. as you know, even if replacing the gpsd and changing settings by angrygps.apk,vibrant GPS works randomly.
i am now aware that only if gpsd is appeared in the battery-consuming list(settings-system-battery-battery use), GPS works well!!!! BUT the dilemma is that gpsd don't launch every time you boot your phone.
nesson said:
some gps fix on the next build makes me excited.
and here i share you something about vibrant GPS. as you know, even if replacing the gpsd and changing settings by angrygps.apk,vibrant GPS works randomly.
i am now aware that only if gpsd is appeared in the battery-consuming list(settings-system-battery-battery use), GPS works well!!!! BUT the dilemma is that gpsd don't launch every time you boot your phone.
Click to expand...
Click to collapse
That dilemma can be resolved using some scripting, I think.
Thanks for the info.
FFC Support Definitely Coming in v2.
oh man...i love u for this......no homo
Thread updated with latest kernel.
FFC Experimental Support added.
Need feedback which version is better since both version have different files.
Please read OP carefully before flashing.
Hey neobuddy,
Glad to see a new updated kernel around here
So if Im not mistaken, the original kernel is the kernel atinm was creating correct?
Also, what would you say has the best battery life for CM7? And will these kernels give better battery life than the kernel that comes with CM7?
jzero88 said:
Hey neobuddy,
Glad to see a new updated kernel around here
So if Im not mistaken, the original kernel is the kernel atinm was creating correct?
Also, what would you say has the best battery life for CM7? And will these kernels give better battery life than the kernel that comes with CM7?
Click to expand...
Click to collapse
Suppose to work well on CM7.
Working smooth on MIUI.
I will test myself within couple of hours.
And will post results in the OP.
I'm not getting Screen V1 gamma hack in voodoo control with your kernel. Can you add that to next version?
hurtz777 said:
I'm not getting Screen V1 gamma hack in voodoo control with your kernel. Can you add that to next version?
Click to expand...
Click to collapse
Did you flashed latest v2 from the OP? If no, please do so.
And what ROM are you on?
I just checked with Tweaked Kernel v2. And I am getting gamma hack.
Note: If you cannot see gamma hack, you probably are on Tweaked/original Kernel v1.
Is this kernel based off of cm7 #134?
hurtz777 said:
Is this kernel based off of cm7 #134?
Click to expand...
Click to collapse
Nope, this kernel is based on MIUI 1.9.30.
I just added changelog, maybe that will solve some of doubts.
I am testing CM7 Builds and kernels.
Will report back and introduce if any better findings.
I just reflashed v2 tweaked and I still don't get screen v1 gamma hacks and the screen is dim at full brightness. I am using the new 2.37 cm7. I am back to Neo17r16 and the screen v1 gamma hacks shows up and works properly with no brightness issues.
Just wanna ask about ffc orientation.. I'm on miui 1. 9. 30 with ffc-6.. (glitch) ang I have a wrong orientation..
Samsung vibrant miui
pinadala gamit ang
XDA PREMIUM APP
TG P990 ICS V30A - Stable - Rom and Advanced Kernel
BY TOPOGIGI
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES:
- Based on ICS 28G Nvflash 1st edition from Stefan Guendhoer
- Updated Gapps in /system/app
- Updated Meteo Widget
- Updated Polaris Office
- Advanced 1.4 OC/UV kernel recompiled from SU660 LG source for P990
- EXT4 filesystem for /system, /data and /cache partitions
- /system/etc/init.d support
- CIFS support
- TUN support
- Tweaked Deadline scheduler
- Sio scheduler (default in this rom)
- Supercharged via build.prop and init.rc (Supercharger is named "v6sc" in /system/xbin)
- KAK (Kick Ass Kernelizer) included in /system/xbin (named kak) and in init.d
- OC up to 1408 Mhz (via SETCPU, Antutu CPU Master or Pimp my CPU)
- UV (via Pimp my CPU or others)
- Optimized mount points with timed commits and noauto_da_alloc option
- Hotplug CPU governor (finally the second CPU goes to sleep when it's not needed)
- ZRAM included with 75MB swap size
- SuperSU by Chainfire is included
- Busybox (1.19.3) is included in /system/xbin
Click to expand...
Click to collapse
Long story short, this is a follow-up to the excellent work Stefan did with his ICS28G release. I decided to post this rom some days before my original intentions, because Stefan's thread is now closed and there will be no follow-up. Besides that, LG is making us wait until the end of the world before releasing their official update and this will make me work twice at least (now and when the proper kernel sources will be released). That's all.
Feedbacks are welcome.
DISCLAIMER: This ROM comes with NO warranty. If you brick your phone, don't blame me, I'm only experimenting with my phone and sharing the results with you, mates!
INSTALLATION INSTRUCTIONS:
- BACKUP BACKUP BACKUP your actual rom and your data before installing anything!!!!!!
- Follow accurately Stefan's instructions in his original thread: this is a rom meant to be installed with nvflash!
- Reboot your device at the end of the process, go to system/xbin with a terminal emulator and type "su" and "v6sc" for checking the V6Supercharger functionalities
- Enjoy your new rom.
Click to expand...
Click to collapse
P.S. This rom wipes completely your phone (see changelog for exceptions),Backup all your data before installing this Rom!!!
KNOWN ISSUES:
- Overclocking is highly unstable in this rom. I managed to OC my device for a few minutes but it hangs in a while. So, OC is for now enabled only for TESTING PURPOSES! Keep that in mind and do not complain about it until I will manage to make it stabler. (All OC issues are solved flashing SP2: overclock is really stable on my device @ 1.3 Ghz)
Click to expand...
Click to collapse
RECOMMENDED DOWNLOADS/SERVICE PACKS:
- TG ICS28G SERVICE PACK 2 - download from here: http://depositfiles.com/files/4bza0mnh3
It's a CWM flashable .zip (flash it via recovery) with the following changelog:
- Stable overclock @ 1.3 Ghz (1.408 max OC for lucky people with an elite tegra chip)
- Increased swappiness (65) and zram (80Mb)
- 128 Mb ramhack thanks to wkpark's patch and suggestions.
Click to expand...
Click to collapse
Good luck!
DOWNLOAD:
1.0 - Full ROM with experimental kernel (1.5 Ghz) with EXT4 partitions http://depositfiles.com/files/99led00ho
1.1 - Full ROM (CWM flashable) with stable SP2 OC kernel (1.4 Ghz) with EXT4 partitions rebased on v30a LG release http://depositfiles.com/files/iyl2urjxk
Click to expand...
Click to collapse
__________________
CHANGELOG:
1.0 Initial Release - Flash with nvflash [OBSOLETE - USEFUL ONLY FOR PEOPLE COMING FROM OTHER ROMS/OLD BOOTLOADER/DIFFERENT PARTITION SCHEMES]
1.1 Flash with CWM - Entirely rebased on new v30a LG leaked release - Fully deodexed rom - Raised zram to 90 mb - Removed LG task manager - Added Gmail 4.2 with pinch to zoom in /data/app/- Added Jackpal's Terminal Emulator in /data/app[ACTUAL]
Click to expand...
Click to collapse
NOTES and KERNEL SOURCE:
- https://github.com/Topogigi/LGE-Kernel-Star-ICS
I need time to comment out the source for every single change I made. So I committed the source AS-IS for other developers to immediately take advantage of an already patched base, ready for further commits. I will add comments to the source ASAP
- People coming from other roms are strongly advised to firstly flash the v28g nvflash package (1.0 rom nvflash based) and THEN upgrade to the following releases
Click to expand...
Click to collapse
CREDITS:
- The entire CM team and AREMCEE in particular for his kernel repository. Without his github commits I would have not been able to recompile the sources
- Zeppelinrox for V6SuperCharger and Kick Ass Kernelizer
- wkpark and ibladesi for OC/UV code and ramhack solution
- Stefan Guendhoer for providing the base rom I reworked
- Faux 123 for the tweaks I applied to the deadline scheduler
- LG for providing us a leaked rom ?????? Am I just crazy ?????
....and many others that helped sharing their ideas and work for free.
Click to expand...
Click to collapse
ROM is uploading now (37% at the time being).
In the meanwhile, I drop some notes and some thoughts about it:
1) I use this rom from last week without any issue (besides overclocking) ad I must admit that even with the recompiled kernel I noticed no issue. Battery life is quite good compared to CM7.
2) The kernel is the same that AREMCEE used for his CM10 and the issues I noticed there are not present here. I mean I did not encounter the in call audio bug nor the Bluetooth always disconnecting issues here. So, I think that the old bootloader has a role in these bugs (the kernel is not the guilty part).
3) Overclocking: this is a real mistery for me: on other devices the same code works a charm: here you can't achive a stable OC even at 1.2 Ghz. Please help me to discover if this behaviour is limited to my own device. Try to OC gradually and report your results. The rom will always boot at 1.0Ghz, so no risk to brick it!
4) ZRAM really helps in making device snappier, so you can assume that LG did finally a good work and all the lags you can experiment are due to RAM constraints.
Let me know....
Will test it directly, thanks!
If you want I could share my resumes after one day with you at the friday evening.
Good, we need the new builds of ICS, custom rom ICS, come on!!!!!!!!!!!!!
Thank's master.
welcome back.... many here missed you.
Topogigi said:
2) The kernel is the same that AREMCEE used for his CM10 and the issues I noticed there are not present here. I mean I did not encounter the in call audio bug nor the Bluetooth always disconnecting issues here. So, I think that the old bootloader has a role in these bugs (the kernel is not the guilty part).
3) Overclocking: this is a real mistery for me: on other devices the same code works a charm: here you can't achive a stable OC even at 1.2 Ghz. Please help me to discover if this behaviour is limited to my own device. Try to OC gradually and report your results. The rom will always boot at 1.0Ghz, so no risk to brick it!
Click to expand...
Click to collapse
EDit: yes OC is little flaky right now but we should be coming to stable point when more people work on it.
And old bootloader is not related to in-call audio bug, it will appear after 3-4 days. But its not always the case, that issue is not traceable. Bluetooth fix was simple and it would not be in your kernel if you are not using cyanogenmo_p990_defconfig
So happy to see "new" devs, will be looking forward to flashing this
Sent from my LG-P990 using xda app-developers app
It's nice to see you back
Especially, because of keeping fight up between devs and LG code
Sent from LG 2X using Tapatalk 3 Beta
Harsh said:
welcome back.... many here missed you.
EDit: yes OC is little flaky right now but we should be coming to stable point when more people work on it.
Click to expand...
Click to collapse
That's the way I like to develop. Sharing code (very well commented code) is the way to go IMHO. Cooperation is the key to success.
But.......I will miss Stefan in any case (even if my personal line of thought is nearer to yours than Stefan's one). Devs are rare stuff for a device that's slowly dying, and if I can put a good word in this fuss, try to find a good compromise with him, my friend
Hi Topogigi,
I don't know you, but anyway wellcome back! I've heard the best about your work on O2, so i'am happy you're back. Good luck!
Welcome Back Topo
I am happy that we have the opportunity to try something new from your factory.
Topo Nostaligia was great as a return to the past, so now let's move into the future with the new Topo ICS :good:
And Return Of The Legend!! Welcome back Topogigi!!:victory: :highfive:
I quess that next relases will be cwm flashable?
THX man for Your work !!! Waiting to test
are there any lags in this rom?
Sent from my Optimus 2X using xda app-developers app
Two days ago I smartflashed an original ROM and prepared the phone for selling, but tonight I'm gonna flash your's. Thank you!
I will try it thanks let see oc working
---------- Post added at 08:46 PM ---------- Previous post was at 08:42 PM ----------
Is possible to make 1 OC kernel to official cm10?
Upload finished, rom online. Enjoy.
P.S. I will make a CWM flshable zip, but many people are now stuck with the old bootloader and ATM it's better to release a rom with nvflash. I'll consider to build two versions next time.
Topogigi said:
Upload finished, rom online. Enjoy.
P.S. I will make a CWM flshable zip, but many people are now stuck with the old bootloader and ATM it's better to release a rom with nvflash. I'll consider to build two versions next time.
Click to expand...
Click to collapse
is possible to compile a flashable zip of kernel to official cm10?
anjo88 said:
is possible to compile a flashable zip of kernel to official cm10?
Click to expand...
Click to collapse
No, CM10 kernel is slightly different. And, I will consider to build something for cm10 if AREMCEE will adopt the new bootloader for CM10....
WTF, some leaves unfortunately, but now you're back Topogi, we all missed you and we all welcome you back and thanks for sharing your rom
Sent from the new smoothly LGP990
Topogigi
Pls some mirror servers, depositfiles are very slow...
Btw thx for ROM, i will try it tomorow.
Hi guys,
since we haven't got any kernel for our omni roms I've decided to make one. For now it's just an alpha but to me seems pretty stable I'm releasing here as a test. Please report what do you think. It's based on "stock" omni kernel with overclock (for now I'm using this commits https://github.com/marco9333/androi...mmit/1d75a501447e609dbb412c350d79ac1ef720a630 and https://github.com/marco9333/androi...mmit/36cf4ca9c78144f336dad4af88049b4a6bf59fac but from next release I'll try @humberos commit https://github.com/humberos/android...mmit/5f768f943d0c420860575e22756b58ff64f0c596 as he suggested See changelog below).
I've tested on Omnirom and @nerdyblonde reported it is working on Carbon, feel free to try on any AOSP based rom (not Samsung based)
Features:
An awful name (I'll try to find a better one)
Different versions for n8000 and n801x
Overclock up to 1600Mhz (booting max freq is 1400Mhz) and underclock to 100 Mhz (booting min freq is 200 Mhz) -> version 0.2 and newer
I've added a (temporary) my commit https://gerrit.omnirom.org/#/c/9555/2 to force cpu frequency range to stock values (I'll decide about merging this in omni rom official builds)
Version 0.1 built with different flags and toolchains but from the next one I'll use only linaro (maybe I'll try sabermod too) See below
See changelog
TODO:
Add fast-charge -> I've almost finished this, I hope to post an update soon (maybe today) DONE
Add underclock (100 Mhz, see humberos commit above) Done.... version 0.2 and up See below
Change installing script to solve possible dialer problems with some roms (unpack modify and repack original boot.img I'll use https://github.com/ModdingMyMind/boot_manipulation but I'll need some time)
Add more schedulers and/or governors (???)
Tell me what would you like to have and I'll think about that
Add thanks to all the developers
DIRECT DOWNLOADS Version 0.6 (LATEST):
N8000 -> https://www.androidfilehost.com/?fid=95784891001603463
N801x -> https://www.androidfilehost.com/?fid=95784891001603462
Link to version 0.5 are removed -> Some tweaks weren't included in the zip so I'm releasing a new version. See second post for changelog
Previous version 0.4:
N8000 -> https://www.androidfilehost.com/?fid=95747613655041727
N801x -> https://www.androidfilehost.com/?fid=95747613655041728
DOWNLOADS FOLDER: https://www.androidfilehost.com/?w=files&flid=19342
HOW TO INSTALL
(*optional) Make a backup (or just keep the original rom zip so you can reflash that to go back to stock omni without losing data)
(*not optional) Use this at your own risk I don't take responsibility for any crash, excessive heat, forced reboot, and whichever problem you could have
Flash the zip in recovery, no need to wipe anything, reboot
Thanks to:
* Omnirom team
* @iofthestorm (is the one who ported and made our devices official with omni)
* @humberos (underclock)
* @Lord Boeffla (overclock)
* @Christopher83 (I'm using his toolchains)
* See my sources on github
CHANGELOG
Version 0.1
Initial release
Version 0.2
Added frandom(See https://github.com/Ryuinferno/frandom-android for reference)
Added underclock down to 100Mhz (Thanks to @humberos)
Added more build flags (Check http://forum.xda-developers.com/showpost.php?p=36693600&postcount=9 for reference)
Version 0.3
Added fastcharge support in kernel drivers(need some testing to check the best currents) -> Disabled by default but can be enabled anytime without reboot(Maybe an entry in Advanced settings??? See next post)
https://github.com/marco9333/androi...mmit/b3e4981b88be28d59ab01052cf3f66d5e411c88b
Added support for ntfs and exfat filesystems https://github.com/marco9333/androi...mmit/27b3a545c6651fc89fd8a1eaf0bc801dc6222b09
Now powerkey should switch the screen on faster (no lag between pressing and screen on) All credits to https://github.com/dsc-team/dsc-team-kernel-project Not working
Added some patches from linaro, they should give more battery juice-> got about +400 points with antutu if you believe in benchmarks... I don't
Version 0.4
Changed mounts flags for system,data,cache and preload (with antutu I had about 300 for storage I/O now is around 980-989 with cfq, got better result with row, test it if you find some improvements)
Added some patches from linaro (see my github)
Increased i2c speed with wacom digitilizer(I'll test this tomorrow)
Increased sampling rate of wacom digitalizer (S-PEN should beis smoother (IMHO))
Added init.d script editable by user to set cpu frequency,fast charge and s-pen tweaks(for now)
Fixed Broken charging animation when the tablet is off (I will merge this into official omnirom after some testing, maybe I'll release here before as a preview, if you're curious https://gerrit.omnirom.org/#/c/9658/) ->
Merged into omnirom, if you're using omnirom now this fix is present "by default", if you have another rom the fix is still installed with the kernel (Report if not working)
Backported xpad driver (xbox, xbox 360 and xbox one controller support) from linux 3.17 (Needs testing)
Backported ps2, ps3, ps4 driver from linux 3.17 (Needs testing)
Other minor changes
Version 0.5
Fix for camera recording and hd video playing (waiting approval approved and merged into official omnirom -> https://gerrit.omnirom.org/#/c/9943/ and https://gerrit.omnirom.org/#/c/9944/)
Reduced hdmi out resolution to 720p and set hdmi audio to 2ch (Quite useless now since hdmi isn't working)
Introduced compiler flags from JustArchi's github and switched to linaro-4.8.4 (should give a performance boost)
Version 0.6
Enabled previous added SMT (http://en.wikipedia.org/wiki/Simultaneous_multithreading)
Patches for conservative and ondemand governors
Added zzmoove governor
Enabled more governors (interactive and adaptive)
Other small changes (check my github)
Source: https://github.com/marco9333/android_kernel_samsung_smdk4412 and https://github.com/marco9333/android_device_samsung_n80xx-common
How to temporary enable fastchargeYou need a rooted device but since you're using a custom rom I assume that you have it
Download a terminal emulator app on google play store
Open it, write su and press enter(superuser or supersu should popup, grant root access)
Write echo 1 > /sys/kernel/fast_charge/fast_charge to enable
Write echo 0 > /sys/kernel/fast_charge/fast_charge to disable
Done
This settings will be reset on startup, if someone is interested I can write a init.d script to set fast_charge on boot just let me know DONE. See below
Stock charging settings AC -> 1800 mAh USB -> 600 mAh
Fast charging settings AC ->1900 mAh USB -> 1500 mAh
How to set kernel parameter on boot (Version 0.4 and up)
You need root and a root browser (like https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree)
Go to /system/etc/init.d and open 99mm_alpha file (it's a plain text file)
All the settings are commented
First section is for cpu frequency set on boot (by default max freq is the stock one so no overclock, try to set it with a kernel app, if everything is alright you can after modify this file)
The second section is about wacom pen, choose the sampling rate you prefe: higher means more smoothness, but possible higher battery consumption
Last section is for fast charge change the 0 in the last line with a 1 to get fast charge enabled at each boot (you should have echo 1 > /sys/kernel/fast_charge/fast_charge)
This is just for omni Rom correct? I rub carbon rom but I'd like to try it.
Sent from my Note 3's big ass screen
smuvman said:
This is just for omni Rom correct? I rub carbon rom but I'd like to try it.
Sent from my Note 3's big ass screen
Click to expand...
Click to collapse
I haven't got time to try on other roms but should work with every AOSP based (like Carbon). You can always try it just flash in recovery: if the boot is ok then it's working, if you got a bootloop you can go to recovery and reflash the whole rom without wiping so you won't lose your data (I think doing a backup is better, just in case)
I can confirm the kernel works on Carbon Rom.. Underclocking works great... I don't overclock though.. Thanks for compiling this for us!
Thanks for taking the time to create it and thanks nerdy for testing
Sent from my Note 2's big ass screen
Unfortunately can't get it to run. Keep getting this fc error.
Running latest carbon rom. I'll wait for the next version. Thanks though. Btw I have the N8013
Sent from my Note 3's big ass screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
smuvman said:
Unfortunately can't get it to run. Keep getting this fc error.
Running latest carbon rom. I'll wait for the next version. Thanks though. Btw I have the N8013
Sent from my Note 3's big ass screen
View attachment 2950595
Click to expand...
Click to collapse
Phone fc is quite strange since you are using a n8013 which don't have a modem. In n801x version of the kernel isn't included the modem driver, so this is the cause of that force close IMHO. You can try two things:
Go to settings-> apps-> all-> dialer-> disable -> reboot and check (now phone app is disabled so it shouldn't crash since is not running)
Or download and flash n8000 kernel. (with the modem drivers so the process can't complain anymore)
I have a N8013 as well.. I didn't get any force closes.. I uninstall all system apps I don't use, the dialer being one of them.. I flashed thru TWRP.. Hope you get it working
Ok that would make sense since I never uninstalled the dialer app. Never needed to lol I will try and report back. Thanks.
Sent from my Note 3's big ass screen
Yea! That did the trick! Thanks guys. Now to tweak!
Sent from my Note 10.1 aka my Mobile Porn Storage Unit
Way to go Marco!! Downloaded and flashed!
Unfortunately this doesn't work on CM11. Tested, and android.phone FCs. :/
Spectral1991 said:
Unfortunately this doesn't work on CM11. Tested, and android.phone FCs. :/
Click to expand...
Click to collapse
If you're using n801x check post #9 http://forum.xda-developers.com/showpost.php?p=55679855&postcount=9
marco9333 said:
If you're using n801x check post #9 http://forum.xda-developers.com/showpost.php?p=55679855&postcount=9
Click to expand...
Click to collapse
I'm using n8000. Tried flashing the related kernel file as well. Still not working on latest CM11.
Spectral1991 said:
I'm using n8000. Tried flashing the related kernel file as well. Still not working on latest CM11.
Click to expand...
Click to collapse
Have you tried to clean Dialer data??
marco9333 said:
Have you tried to clean Dialer data??
Click to expand...
Click to collapse
Couldn't even get there. The FCs happen too quickly. After closing a dialog it immediately appears.
When the message appear do not close the dialog but try to pull down the quicksettings and go to settings from there... If this won't work I'll add a script to kernel zip to clean dialer data (if possible) so you can easily flash directly without further actions
Sent from my Nexus 5 using XDA Free mobile app
Thanks for this Marco, it works great here- Omnirom on a n8013. :good:
Is there any chance you might take over the omnirom development now that iofthestorm is out of the loop? He mentioned he was up for helping someone who was willing to continue the work on it.