Working on Trinity14 I had to try the boot animation simms22 was so loving.
Loved it enough to turn Trinity14 into Honity14.
What differentiates Honity from Trinity is the single frequency OC that should work on more phones than the multi frequency OC variant of Trinity Max and Trinity Vmax.
Yes, i seriously include a bootnanimation.zip with this, it's just more fun with it.
This 2.3.3 Kernel is for CM7 and now also for modaco
I9023 users, hold off getting excited, the LCD may not be the only difference, keeping you from using BLN in this case. I will update this as I find out more about I9023 differences.
Voodoo Sound v6 (cm7)/ v6 (modaco) (Thanks supercurio)
Voodoo Color (impressive new controls) (Thanks supercurio)
BLN V2(Backlight notification) (Big Thanks Neldar! buy his app for blinking notification)
Based on 2.3.3 Gingerbread source.
Safeboot to 1GHz for those phones that don't like OC (But 1.2/1.4 can be used with setcpu)
TUN (Tunneling/VPN support)
CIFS (Samba support)
EXT4 mount fix
HBS - Honey Based Steroids
Modaco kernel now available
A little note on blinking with BLN, it will use more power, static lights as notification you wouldn't have to worry about if you are worried about your battery, your 100 extra apps use way more than BLN.
Honity12 - cm7 - w/ VSV6 + BLN V4
Honity14 - cm7 - w/ VSV6 + BLN V4
Honity12 - modaco - w/ VSV6 + BLN V4
Honity14 - modaco - w/ VSV6 + BLN V4
Major Changes/Fixes:
Voodoo Sound Version6
BLN added, static and blinking lights work (blinking requires neldar's BLN Control Pro app)
Yes i am daring and i click this link because i want to test test test, bring it on, my phone shouldn't break with these but could, i am aware of it, and still i click this link, should i have the urge to format my sd or wipe my phone i will fight it and instead reboot and rejoice.
Sounds good gonna test it out.
I'm a nexus s and I approve this message.
Added to the reference guide of roms, themes, and kernels!
Good work been running for a little bit
Sent from my Nexus S
Morfic, you will be delighted to hear that this appears to be the mythical "works for Will" kernel that we have been pursuing for quite some time! We've both been fooled in the past, but I do believe that this time it works!
PS. Awesome boot logo
willverduzco said:
Morfic, you will be delighted to hear that this appears to be the mythical "works for Will" kernel that we have been pursuing for quite some time! We've both been fooled in the past, but I do believe that this time it works!
PS. Awesome boot logo
Click to expand...
Click to collapse
It's what I built for you, but simms22 and his links caused a transformation
Bootlogo is frame 18 out of the bootanimation.zip
Sent from my Nexus S
BLN for the Nexus S? Am I reading this correctly?
Would you mind making this compatible with 2.3.3, non CM7? Thanks morfic
been running honity for a little now. not a single issue to report. the kernel benches great(1400/1400), 3911 on quad, 62.1fps on nenamark, and a 35777 on an3dbench. and it runs just as good as it benches!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
simms22 said:
been running honity for a little now. not a single issue to report. the kernel benches great(1400/1400), 3911 on quad, 62.1fps on nenamark, and a 35777 on an3dbench. and it runs just as good as it benches!
Click to expand...
Click to collapse
..and the bln ...?
irishrally said:
..and the bln ...?
Click to expand...
Click to collapse
im also wonderin if BLN was fused into this thing. if it was my wishes from the begining of buying this phone is almost complete
no bln...
Lalaca said:
BLN for the Nexus S? Am I reading this correctly?
Click to expand...
Click to collapse
duh, sorry, writing too much vibrant stuff, no bln :/
Eehm what is bln? Just so i know if i should wait with flashing the kernel.
Sent from my Nexus S using Tapatalk
hoseth0711 said:
Eehm what is bln? Just so i know if i should wait with flashing the kernel.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Back Light Notifications, I believe.
Just a kernel addition that allowed the back button (?) to flash on and off when you have a notification since the Nexus S / Galaxy S phones lack a notification LED.
Actually kinda funny.
This is a kernel that shoudl work for everybody, right?
Well it bootloops at my Nexus S x)
But when i flashed another kernel the boot animation was still there D:
WINNNN!!!!!!
dario3040 said:
Actually kinda funny.
This is a kernel that shoudl work for everybody, right?
Well it bootloops at my Nexus S x)
But when i flashed another kernel the boot animation was still there D:
WINNNN!!!!!!
Click to expand...
Click to collapse
make sure your on 2.3.2 bcuz it doesnt work for the newest 2.3.3.
Added a few details to OP
It works like a charm, thank you!
Sent from my Nexus S using Tapatalk
no bln
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All of Team Whiskeys roms perform a full system wipe
OFFICIAL HOME OF BIONIX AND TEAM WHISKEY
http://board.teamwhiskey.com/index.php
http://www.teamwhiskey.com/
http://webchat.freenode.net/
irc.freenode.net / #teamwhiskey
Beta 3 is the most stable build yet. Technically, it should be out of beta, but I still have a couple more modifications to throw in. You won't have any problems with this build. PLEASE run this rom as is and report bugs. DO NOT flash this and then flash other kernels or modifications and then post bugs because we'll have no idea if its the rom or the other kernels or mods you've installed causing the problem.
Nero Beta 3:
- Updated Market
- Updated VoiceSearch
- Fixed blurry mms issue
- Mounting issue fixed (hopefully)
- Added multiple lock screens and Power menu options (HUGE thanks to Jocelyn for her contribution!)
- New shutdown sound
- New livewallpaper
- New status icons
- init script edits for a little extra speed (still tweaking to get it just right)
- Framework edits
Please check out our forum for tons of extras, and don't forget to visit us in our IRC for any help you may need, we're happy to assist.
Nero Beta 2:
- Full JL1 base with our modifications of course
- Heavily modified to look and feel like the nexus s (gingerbread)
- Fixed the black text on black submenu issue. its not white text on black as it should be.
- Modified init scripts for added speed
- Updated Maps
- Updated Gmail
- Updated YouTube
- Additional Framework edits
- New Bootanimation
Download:
Nero Beta 3
I love you.
me too #nohomo
OMG lol, i just finish flashing Fusion 1.2 and set up all the app. Back to flashing again!!
GPS is working?
So many new releases this morning how exciting.
Sent from my GT-I9000 using XDA App
Someone is gonna kill me over this, but...does this have working GPS drivers?
EDIT: Nevermind, great work guys!
I think i'll wait till Froyo officially comes out for the Vibrant. I do appreciate your hard work though. Fusion is a work of art.
Hot diggity!
yeh does gps work?
Vibrant - Bionix Fusion 1.1 - JAC's Xmod kernel v1 - ext2 lag fix
go_l_den said:
Someone is gonna kill me over this, but...does this have working GPS drivers?
Click to expand...
Click to collapse
I dont' think so, it was not listed as a KNOWN issue!
It says official froyo based, i doubt it would have missing drivers.... bugs yes
Yes gps works
Heck Yeah!! It's flashing time!!!!!
ur amazing as always! Thanks to Viral as well!
First of all let me say I love your work I just have one question is the battery life issue fixed
Sent from my GT-I9000 using XDA App
Oh my god what to flashhhhhh
Nice to Burn source!!!!
It was Clearly said not to release the Rom from the source & only use what we needed to get froyo stable.. Very, very not Cool Dude!!!
Way to support your Leak btw!
~Eugene
Will see how my Vibrant handles this one, my CPU is flaky when it comes to overclocking, is overclock a requirement?
flameinthefire said:
First of all let me say I love your work I just have one question is the battery life issue fixed
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Hasn't been long enough to test battery life. I've been up all night putting this rom together so it was flashable. Literally just got done and uploaded. No time for testing.
lqaddict said:
Will see how my Vibrant handles this one, my CPU is flaky when it comes to overclocking, is overclock a requirement?
Click to expand...
Click to collapse
No, this comes with the stock JK2 kernel. Its not OC.
[KERNEL]☆Jame Bond☆NS+NS4G w/BLN,ext4 & full voodoo (cm7-1.5.9,stk-1.5.9)
thread closed by me. see this post
·:*¨¨*:·..·:*¨☣☆Jame Bond☆☣·:*¨¨*:·..·:*¨
straight from The Land of Smiles
These kernels all run at 1ghz do not use setcpu or profiles!
additions include- voodoo sound♫, voodoo color and has ext4 optimizations (thanks supercurio)
benchmarks in quadrant will be 600+ over the 'stock' kernel owing to the ext4 mount mod
enjoy
Thanks to Neldar and Morfic we now have BLN (back light notification) for the Nexus S
-now thanks to Akent, bln is working on the 9023
-thanks to Netarchy as well for some clarification
-all kernels are "Sabai" Uv for incredible battery life
read about voodoo sound optimization HERE
read about ext4 speed improvement HERE
get the Voodoo control app HERE
better yet support the voodoo project with the donate app HERE
get the BLN control app HERE
for added functionality support neldar with the PRO app HERE
>source
instructions flash rom-reboot-then flash kernel
*note- if you haven't flashed any other kernels then just flash from recovery as long as you have rebooted at least once
*setcpu is not recommended for this kernel, underclocking/profiles will decrease battery life
**(stock rom)..if you are not coming from a stock kernel then go to system/etc/init.d and delete
([ S_10mountfix ] and [ S_99complete ] for morfic) and ([99nexusunit] and [placeholder] for netarchy) then go to system/ and delete the modules folder. then flash og kernel
note- all kernels have ext4 mount mod, voodoo sound, and bln
☢downloads☢
⇒note-2.3.4 roms only
cm7/any kernel
the ☆Jame Bond☆ sabai dee®
stock (rom) kernel
the ☆Jame Bond☆ sabai dee®
-amazing speeds!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanks ogdobber. its not my flavor, but im sure lots will be using this kernel
Excellent man, thanks for posting this.
time to submit to CM This really should be the stock kernel used in CM7 until someone can update the prebuilt kernel with something that can be used stably for 95% of NS users
Very nice to have options. Thanks
Sent from my Nexus S using XDA App
simms22 said:
thanks ogdobber. its not my flavor, but im sure lots will be using this kernel
Click to expand...
Click to collapse
your welcome guys. Simms, I would have to make you a 1800
ogdobber said:
your welcome guys. Simms, I would have to make you a 1800
Click to expand...
Click to collapse
.......
Good stuff, thanks.
Will this work on all nightlies, or we need to a get a new one for each release?
Thanks.
AndyCr15 said:
Will this work on all nightlies, or we need to a get a new one for each release?
Thanks.
Click to expand...
Click to collapse
yes, it will work for all nighllies
Well that makes life much easier then! Muchos grassy ass!
i'll give this one a go when i flash tonight's nightly. thanks
I use CM7 #34 with Netarchies 1.2.2 on 1.3 Ghz
I would try this kernel tomorrow with the next Nightly...
Will i have to do more as flashing the next nightly and then this kernel to get ext4?
Or will I have to format the sd-card for ext4?
Thanks, Duffy
Duffy said:
I use CM7 #34 with Netarchies 1.2.2 on 1.3 Ghz
I would try this kernel tomorrow with the next Nightly...
Will i have to do more as flashing the next nightly and then this kernel to get ext4?
Or will I have to format the sd-card for ext4?
Thanks, Duffy
Click to expand...
Click to collapse
the ext4 "mount" hack is included with this kernel. flash rom - reboot - then flash this kernel
if you want to see the speed difference from the ext4 hack in the kernel run some quadrants first, then flash the kernel from recovery
the sd-card ext4 mod (different) can be very dangerous if you don't know what you are doing so I don't recommend it
Is putting the smartass governor in this out of the question?
Nexus S
Unfortunately this kernel breaks bluetooth.
jlevy73 said:
Unfortunately this kernel breaks bluetooth.
Click to expand...
Click to collapse
whoops...link will be down until I fix. thanks for the info
bluetooth now working. thanks for pointing that out jlevy sorry to anyone for the inconvenience
Thanks, works great now.
was waiting for this from you, cheers.
Excellent. Finally enhancements you can use without the useless instability of O/C. Thanks!
Edit: Crap, BT still broken for me. Same deal. Turns on but won't pair. I may try a clean install but that was disapointing.
This is stock ZSJPJ 2.2.1 - with some enhancements.
Upgrade temporarily moved to here: http://forum.xda-developers.com/showpost.php?p=12320922&postcount=48
Enhancements:
Correct ZSJPJ services.jar modded for soft reboots and non-disappearing signal at -79dBm by whitehawkx.
Correct ZSJPJ android.policy.jar modded for home key haptic feedback by jellette.
KB1 modem.
KB1 PhoneSetupWizard.apk and SetupWizard.apk - these do not have calls to TouchWiz30Launcher.apk which means that you can remove TouchWiz30Launcher.apk without any problems.
KA7 Stock Voodoo Kernel disabled by default
Build.Prop optimizations.
S.gps.2 rebuilt.
EDT Start Up Tweaks - May not be the final decided upon release, your opinion count! Full credit goes to the full team on this one.
EDT Binaries similar to FuguTweaks, but better!
Power Options
Replacement wallpapers.
Replacement sounds.
Init.d optimization.
Accurate battery mod 100/100.
Minimally themed.
V4G TouchWiz30Launcher.apk thanks to whitehawkx - sorts apps by their english name and defaults to screen 4.
This is a good starting point for themers / devs - does not contain the added lockscreens.
Follow standard EDT instructions for flashing.
Just follow the instructions in the thread that contains the kernel you want to flash over this.
Screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download <174.2MB> - http://www.mediafire.com/?fnakc3gmd83f7io
Heck yes!! Thank you!! Another gem released by edt!!
i like stock-ish.. will download now and give feedback..
EDIT: From what I have tested so far
Snappy even when Voodoo disabled
1466 Quadrant score when Voodoo enabled
Wifi works
GPS works (locks in less than 10 secs)
Bluetooth works
Wifi/USB tethering works
Exchange Email works (no FC)
SD cards mounts fine to PC
*MMS works but received MMS image is blurry
Camera and Camcorder works fine at high def (5M and 720p)
Will provide further feedback if other issues arises..
Added pic to OP.
I've been using JPJ for a few days now and I must say it is the best 2.2.1 rom to date. I also LOVE the new chinese keyboard.
Like this so far... love the look and it feels as snappy as Trigger 2.8.1 or Malice 2.0
Will definitely check this out. Always prefer the stock optimized roms. Will the phone apk with constant volume work on this?
Does this rom support ffc?
Sent from my SGH-T959V using XDA App
could somebody else test the MMS? I tried changing MMS settings and tried different images, but when I receive the images it is all blurry..
what! this is not themed! I will hold my breath until it is.
jhepoy said:
could somebody else test the MMS? I tried changing MMS settings and tried different images, but when I receive the images it is all blurry..
Click to expand...
Click to collapse
Verified. Give me a minute to look at it.
does it have some of the TWIZ widgets?
mainly Feeds and Updates
I just have one simple question to you guys who run these 2.2.1 ROMs....
Is there a noticeable difference or plus to run 2.2.1 over 2.2 ? I'm currently running trigger and LOVE it!
Is this already rooted ? I assume it is but just want to make sure. I plan on flashing Overclock 2.1 over this.
AngryDinosaur said:
does it have some of the TWIZ widgets?
mainly Feeds and Updates
Click to expand...
Click to collapse
Does not but I will add those back in tonight along with power options and some other things.
eminembdg said:
I just have one simple question to you guys who run these 2.2.1 ROMs....
Is there a noticeable difference or plus to run 2.2.1 over 2.2 ? I'm currently running trigger and LOVE it!
Click to expand...
Click to collapse
There is a noticable difference but this is not themed heavily so I'd stick with what you like.
tenbeau said:
Is this already rooted ? I assume it is but just want to make sure. I plan on flashing Overclock 2.1 over this.
Click to expand...
Click to collapse
Rooted and ready!
jellette said:
Does not but I will add those back in tonight along with power options and some other things.
There is a noticable difference but this is not themed heavily so I'd stick with what you like.
Rooted and ready!
Click to expand...
Click to collapse
Thanks!!!! just donated.
eminembdg said:
I just have one simple question to you guys who run these 2.2.1 ROMs....
Is there a noticeable difference or plus to run 2.2.1 over 2.2 ? I'm currently running trigger and LOVE it!
Click to expand...
Click to collapse
I love Trigger 2.8.1 but 2.2.1 ROM's like Malice 2.0 and this are , for me, noticeably smooth.
3 questions: v6 voodoo sound? EDT Tweaks? Darkyy ram tweak?
Does it have menu lag or that is fixed? Sorry haven't been around for a while
thanks EDT
BoomBoomPOW said:
3 questions: v6 voodoo sound? EDT Tweaks? Darkyy ram tweak?
Click to expand...
Click to collapse
Voodoo is supercurios.
edt tweaks : 1/2
ram tweak ： yes plus a little.
Working on a replacement for the tweaks that will work for stock kernel and oc/uv kernels. Need some finishing tweaks before it is included. Running this rom last night with overstock 2.1 with the new script and binaries netted consistant 2400plus quadrant scores and great stability. Almost there.
This is ported VUVKD1 ROM which is an official update from Samsung for Vibrant 4G.
- Deodexed
- Rooted
- BLOAT included
- Stock boot and shutdown animation
- EDT GPS fix
- Movie link to "inception" was removed
- 4G status icon was removed to avoid confusion
- KB1 modem
- Bali 1.8.2 Voodoo kernel
Like most ROM, flash using CWM and wait for about 10 - 15 minutes, then reboot.
Thanks:
Luckyduck69 - for providing KD1.
Eugene - for the initial framework sd fix
Whitehawkx - for sd mod on Settings
EDT team - for GPS fix
Supercurio - for voodoo goodness
Disclaimer:
I'm not responsible anything happened to your phone. Flash this ROM at your own risk!!!
ROM download: http://www.multiupload.com/F03Y8E0FWG
SGSII Theme by jellete:
Thanks Jellete for porting this theme
This theme includes:
- Enhanced GPS
- EDT Tweaks
- Overstock kernel
This deletes your current init.d and replaces it and will also install overstock, disabled by default.
Theme download: http://www.mediafire.com/?1fjpgsi3z7pjchc
First
10 chars
..sixteenth
Sent from my GT-I9000 using XDA Premium App
2.2.1? GROSS haha jk, thanks man!
Screen shots plz...awww hell im flashing it!
Sent from my GT-I9000 using XDA Premium App
Is this ROM compatible with the original Samsung Vibrant (3G)? I'm a bit confused since it references that it is a "port" from the 4G. I don't want to install it on my 3G version and screw it up. Thanks kindly.
stevec5375 said:
Is this ROM compatible with the original Samsung Vibrant (3G)? I'm a bit confused since it references that it is a "port" from the 4G. I don't want to install it on my 3G version and screw it up. Thanks kindly.
Click to expand...
Click to collapse
It should work just fine on regular vibrant.
Flashing now Thank you.
Has anyone been checking if the SGS 4G has been leaked 2.3 roms?
got edt tweaks? if not..can it be put it in?
anthonys2r said:
Has anyone been checking if the SGS 4G has been leaked 2.3 roms?
Click to expand...
Click to collapse
They don't ..
mr.haqeem said:
got edt tweaks? if not..can it be put it in?
Click to expand...
Click to collapse
No but you can put it in yourself. I already included rambooster with this ROM and Bali kernel also already have its own built in tweak which include good battery life. Give it a try ..
Does this include the badges on the MMS and EMail apk's that the 4G has?
Thanks, going to check this out.
Is this dependent on Bali?
Have you noticed if the frameworm is resistant to change like the leaks were?
Still have menu lag?
Finally, now you have to re-port the power options and locks! Fun.
jellette said:
Thanks, going to check this out.
Is this dependent on Bali?
Have you noticed if the frameworm is resistant to change like the leaks were?
Still have menu lag?
Finally, now you have to re-port the power options and locks! Fun.
Click to expand...
Click to collapse
You can use other kernel if you want, is not dependent on Bali. I haven't try any other changes besides mount point so haven't notice it. Looks like I'll find out soon enough since I'm working to port whitehawkx's power/lock options. As for menu lag .. yeah it does .. on and off for me. Any idea how to get that fix?
zaphod_fl said:
Does this include the badges on the MMS and EMail apk's that the 4G has?
Click to expand...
Click to collapse
I didn't make any changes to any of those .. so I assume it does.
drhonk said:
You can use other kernel if you want, is not dependent on Bali. I haven't try any other changes besides mount point so haven't notice it. Looks like I'll find out soon enough since I'm working to port whitehawkx's power/lock options. As for menu lag .. yeah it does .. on and off for me. Any idea how to get that fix?
Click to expand...
Click to collapse
Have tried and tried. You can use button remapper and it fixes it BUT kills home key...
jellette said:
Have tried and tried. You can use button remapper and it fixes it BUT kills home key...
Click to expand...
Click to collapse
I'll stick with menu lag .. thank you .. LOL
SGSII Theme.
Enhanced GPS
EDT Tweaks.
Overstock.
Flash it now!
Thank drhonk for the port!
Download <30.36MB> - http://www.mediafire.com/?1fjpgsi3z7pjchc
This deletes your current init.d and replaces it and will also install overstock, disabled by default.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hope the menu lag gets fixed someday... does the SGS4G also have this menu lag or is it only after porting it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Immortality series were good, but they are now dead. They were the kernels that taught me how to dev, now its time for an evolution. The 99Problemz series are all about performance, no lag, no freezes, just smoothness. This kernel included everything from Immortality-CM, but brings more features. And now to the disclaimer:
I (NOR TEAM WHISKEY NOR TEAM INFINITY) WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR PHONE BEFORE, DURING, OR AFTER FLASHING THIS. PLEASE READ ALL NOTES AND WARNINGS, FOLLOW DIRECTIONS, MAKE A NANDROID, HAVE ODIN READY, AND FLASH AT YOUR OWN RISK!!!
Features:
Updated to work with stable CM7 and updated MIUI and OMFGB roms
Voodoo Sound v10
Voodoo Color
CWM Recovery v5.0.2.6
BLN supported (use BLN Control app to utilize)
Safely boots to 1ghz
OCable to 1.4ghz
User configurable UV
BFQv2 scheduler(set to default)
Smartass and Smartassv2 governor option available
GPU tweaks integrated
Integrated v(r) scheduler
Integrated zram and zache
LIPPOL94's kernel cleaning script integrated into flash package
Notes:
1. BLN is fully supported, use BLN Control to use BLN
2. This kernel uses the same stock voltages as the stock CM7 kernel, and boots at 1ghz. Use SetCPU or Voltage Control to OC/UV as you see fit.
Known issues:
BLN blinking is reported not working, fix coming soon.
All my downloads will be hosted from my Google Code page, so i can track number of downloads
Download 99Problemz v1
or
Credits:
drhonk
ttabbal
ECOTOX
Tk-Glitch
TeamHacksung
TeamCyanogenMOD
supercurio
romman
Lippol94
coolbho3k
xan
Serendipityguy (for custom banner)
Anyone else i forgot, let me know.
reserved for me
BLN supported (use BLN Control app to utilize)
Will test this out..
I've been using Bali. Will give this a try and see how it works for me.
muleyman said:
I've been using Bali. Will give this a try and see how it works for me.
Click to expand...
Click to collapse
Same here.... hopefully even better battery life
Thank you very much for new kernel.
Bali rocked...
just tested.....fully ffc compatible.
goodwrk! plus i love the boot picture
Do you use any of the "leakage" tweaks the Glitch ML and LL kernels do that allow for better overclocking and undervolting? Would love to try out your kernel, but I've become rather attached to 1400mhz, which I can't reach without those tweaks.
kaintfm said:
Do you use any of the "leakage" tweaks the Glitch ML and LL kernels do that allow for better overclocking and undervolting? Would love to try out your kernel, but I've become rather attached to 1400mhz, which I can't reach without those tweaks.
Click to expand...
Click to collapse
I have thought about it, but I wanted to keep these series as stable and universal as possible. I will consider adding those into the next version.
Sent from my XDA app cuz I'm stalking your mom....
Glad to hear it. Always been a fan of your work!
Gingerbread bootloader compatible?
Sent from my T959 using Tapatalk
zul8er said:
Gingerbread bootloader compatible?
Sent from my T959 using Tapatalk
Click to expand...
Click to collapse
Uhh yeah, it's a gingerbread kernel
Sent from my XDA app cuz I'm stalking your mom....
I keep getting this error...
"403. That’s an error.
Your client does not have permission to get URL /files/CM7_Vibrant_99Problemz_v1.zip from this server. (Client IP address: **.***.***.***)
You are accessing this page from a forbidden country. That’s all we know."
I'm in the USA... Washington state to be specific... is there a specific country I should find a proxy from or can someone mirror?
EDIT: Used a proxy, was able to download. Thanks!
sound?
i have a great question. just like bali and the stock for miui the sound is really quiet. glitch got theres to sound pretty decent in volume. do you have a tweak for this as well? please say yes
dapoharoun said:
just tested.....fully ffc compatible.
goodwrk! plus i love the boot picture
Click to expand...
Click to collapse
FFC works, but I have t959v camera and the image is 90 degrees rotated. Do you know if this can be corrected. Thank you.
dapoharoun said:
just tested.....fully ffc compatible.
goodwrk! plus i love the boot picture
Click to expand...
Click to collapse
i correct myself....recording video with ffc is fine, but playback is a screwed up.
Love the smoothness on this kernel. Using the SmartAssV2 and my vibrant is running like a champ! Kudos to the Dev.
I try to use BLN and the blinking option doesn't work. Any help?
Apparently it won't even let me access Recovery as if it doesn't even exist. I don't want to have to Odin back to stock just to get everything working.
Anything you can suggest?
I'd check what rom you are trying to use with this Kernel. I believe the dev said it was compatible with CM7 and Miui. So i'm guessing your results may vary depending your rom.