Database Develop

[RECOVERY] Amon RA_v1.7.0.1 for swift

I played a little today and did Amon-Ra recovery for our Swift
This enables us
Partition your sd card to swap, ext2, fat32
Backup NAND + ext
Backup BART
Screen
Files update.zip require slightly different syntax for the script updater-script
Files are available http://forum.android.com.pl/f200/
DOWNLOAD
recovery_ra1.7swift.img

what is it swift?

angelsanges said:
what is it swift?
Click to expand...
Click to collapse
codename lg gt540 Optimus

Good job! Thanks man.
Sent from my GT540 using XDA App

How to install?
Is like clockworkmod: rom with fastboot and then fastboot flash recovery recovery_ra1.7swift.img

bluepower said:
How to install?
Is like clockworkmod: rom with fastboot and then fastboot flash recovery recovery_ra1.7swift.img
Click to expand...
Click to collapse
Yes installation by fastboot

Thanks a lot and wonderful job

so is this better than the clockwork recovery?
will this overwrite clockwork recovery if I already have that installed?
and the most important question:
DOES THIS WORK WITH PS3 JAILBREAK? I heard someone did it with this recovery, I want this to happen with the GT540!!!

I had clockwork now i have amon ra, it will overwrite clockwork when you install it

I've been trying to put this info my phone. But I have a problem.
Phone is ruining in fastboot mode, am typing command in cmd am pressing enter, then my PC reboot :/
Does somebody had the same problem?
__________
Written with Tapatalk on GT540

ZduneX25 said:
Phone is ruining in fastboot mode, am typing command in cmd am pressing enter, then my PC reboot :/
__________
Written with Tapatalk on GT540
Click to expand...
Click to collapse
Why you do that?
- Put your phone on fastboot mode
- Link it to the pc and turn on adb command
type:
fastboot flash recovery recovery_ra1.7swift.img
and you're done

I did this... I wrote I did. After ENTER the command my PC doing a reboot by itself, before apply recovery in my phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Is it working now? If it doesn't, download this: http://www.mediafire.com/?07qod3dg208mb30
Then, put the amon ra file in that folder.
- Put your phone on fastboot mode
- Link it to the pc and turn on adb command
type:
fastboot flash recovery recovery_ra1.7swift.img

you can try this method too (i use it)
1) copy recovery_ra1.7swift.img to sdcard
2) download/install some terminal into your phone.
3) run terminal and write :
Code:
#su
#flash_image recovery /sdcard/recovery_ra1.7swift.img
(or when it's not working:)
flash_image recovery recovery_ra1.7swift.img ;
flash_image recovery "/sdcard/recovery_ra1.7swift.img"
also you can to it in adb shell(connected into PC):
Code:
#su
#adb shell flash_image recovery /sdcard/recovery_ra1.7swift.img
or
Code:
#su
#adb shell
#flash_image recovery /sdcard/recovery_ra1.7swift.img
Hope this helps. (for me, it helped, because my computer freezes when using "fastboot flash" commands. )

Am reinstalling SDK and will check.
@hani93 thanks for this tut, it can be very helpful for me, cos my PC freezes too :/

ZduneX25 said:
Am reinstalling SDK and will check.
@hani93 thanks for this tut, it can be very helpful for me, cos my PC freezes too :/
Click to expand...
Click to collapse
no problem.
it should work.
(i googeld it for 4-5 days :S)
now i'm always using this method

I don't have to use fastboot with you method I guess, am I right??

ZduneX25 said:
I don't have to use fastboot with you method I guess, am I right??
Click to expand...
Click to collapse
that's right
just copy recovery image to sdcard (root dictionary) , install some terminal app( in market "terminal emulator" ) and enter commands...
and after that.. when you enter it . and terminal says "flashing recovery" ..or something, and then ends(with new command line)..
something that:
Code:
#su
#flash_image recovery /sdcard/recovery_ra1.7swift.img
flashing recovery...
#
make reboot and hold on home+power, and recovery comes up.

No way, so don't I need rom with fastboot to get recovery?? I just flashed my phone about 2 days ago with ROM+Fastboot to get recovery via fastboot (I lost some data - all angry birds saves).
And you are saying that I could use your method on my previous ROM without Fastboot, am I right??

ZduneX25 said:
No way, so don't I need rom with fastboot to get recovery?? I just flashed my phone about 2 days ago with ROM+Fastboot to get recovery via fastboot (I lost some data - all angry birds saves).
And you are saying that I could use your method on my previous ROM without Fastboot, am I right??
Click to expand...
Click to collapse
yeah...
i'm not sure. that it works with rom what's without fastboot..
but. for me it worked xD

CWM Recovery v.5.0.2.6 in English

this i got from Wildfire S section.
IT CAN BE PUT INTO SALSA, AND IT WORKS.
DWYOR
save the recovery.img and flash_image in the root of your adb folder.
Code:
adb reboot bootloader
make it fastboot usb
Code:
fasboot flash recovery recovery.img
from the hboot menu, go to recovery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please say thanks if you are fine with it

kanded said:
this i got from Wildfire S section.
IT CAN BE PUT INTO SALSA, AND IT WORKS.
DWYOR
save the recovery.img and flash_image in the root of your sdcard.
Code:
su
Code:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
Code:
cp /sdcard/flash_image /system/bin
Code:
su
Code:
flash_image recovery /sdcard/recovery.img
get into recovery by typing : adb shell reboot recovery
Click to expand...
Click to collapse
u tried? get some screenshots up lol is it fully functional with backups enabled?

how did you run these commands? what did you use?

these command should be done via adb debug.
open it, and do the same.
http://www.freeimagehosting.net/umo22

keeps failing, heres a screen shot of what its doing.
any ideas?
goes to bootloader then just hangs

man, check your battery, minimum 50% power.

kanded said:
man, check your battery, minimum 50% power.
Click to expand...
Click to collapse
it was around 62% but ill charge it up fully and try again.
..........................................Edited.........................................................
OK charged it to 83% tried it again, still hanging for well over 20mins at that point.
somethings still not right.....

i edit the post. check this, i bet you wont get into probs again. let me know.

nope still not working! you missed a t from fasboot lol, but no, tried everything now and still nothing.

Tried from my other computer and still no luck.
sent from my custom HTC Salsa.

it works man, friends did it, why you still not work ?

Have no idea mate, puzzles me to be honest.
sent from my custom HTC Salsa.

let me know your probs, mate,

It stops in exactly same place as before, I've done everything stated. And it just won't nudge lol, even used a different computer with sdk installed,and still does it then.
For now ill leave it be, till I can figure it out.
I've flashed back to rom before and using that now as market is stable there.
What's the idea with this internal memory then? As this rom has very little space left lol and could do with the sapce available really
sent from my custom HTC Salsa.

so, do you have cwm ? if you have its fine. i still wonder wht exactly your problem is. if you got market problem, you just go back to your stock rom, leave the chinese rom, and get back to your original rom.

I've gone back to usable rom now. Leave it there for awhile.
sent from my custom HTC Salsa.

Hi,
@BigBearEvo isn't the case that you perhaps have your device still s-on?

snatch_this said:
Hi,
@BigBearEvo isn't the case that you perhaps have your device still s-on?
Click to expand...
Click to collapse
Not likely my friend, the xtc clip makes you s-off.
Sent from my HTC C510e using Tapatalk

After the installation if i wanna uninstall the recovery, can i do it and how?
Thanks...

any_body said:
After the installation if i wanna uninstall the recovery, can i do it and how?
Thanks...
Click to expand...
Click to collapse
reinstall your ruu and it wipes the handset completely inc recovery

[Q] [RESOLVED] Need instructions for installing CWM on ZV8 Rooted

I just need instructions on installing Clockwork on rooted zv8. The AIO does not work for me. It hangs at starting daemon.

Are you in internet connection mode with debugging enable? I know it sounds like a stupid question but I had a brain fart when doing it and forgot that part... doh!

My USB connection is broken, so here is how I did it using terminal emulator.
1) Download the cwmrecovery.img to your SD. ( I downloaded MT's zip file and then extracted all with root explorer, but you only need the cwmrecovery.img file.)
2) Use root explorer to copy or move it to the /data/local/tmp directory (make sure permissions are set to r/w/exe).
3) Launch terminal emulator and type these commands:
su
mount -orw,remount /dev/block/system /system
mount -orw,remount /dev/block/data /data
dd if=/data/local/tmp/cwmrecovery.img of=/dev/block/mmcblk0p14 bs=4096
rm /data/local/tmp/* 2>/dev/null
4) exit terminal emulator and then reboot.
You can then try the vol down+power button combo upon boot to enter CWM.
Good luck.

Haxcid said:
I just need instructions on installing Clockwork on rooted zv8. The AIO does not work for me. It hangs at starting daemon.
Click to expand...
Click to collapse
Download the zv8recovery.zip in mt's "easiest" thread in Dev. Run the bat and you'll be set.

Cal8192 said:
Download the zv8recovery.zip in mt's "easiest" thread in Dev. Run the bat and you'll be set.
Click to expand...
Click to collapse
Ran it twice, each time it does this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then it reboots to a black screen. Clock work never loads. I pull the battery and it reboots normally. It will not reboot to clockwork. It does the same in the screen shot every time I run that batch.

Haxcid said:
Ran it twice, each time it does this...
Then it reboots to a black screen. Clock work never loads. I pull the battery and it reboots normally. It will not reboot to clockwork. It does the same in the screen shot every time I run that batch.
Click to expand...
Click to collapse
It still needs the local.prop for the way I have the bat coded. Put it back in data and rerun, you should be good to go!
Sent from my VS920 4G using Tapatalk 2

mtmichaelson said:
It still needs the local.prop for the way I have the bat coded. Put it back in data and rerun, you should be good to go!
Sent from my VS920 4G using Tapatalk 2
Click to expand...
Click to collapse
Where do I grab the local.prop and how do I put it in? :x

Same issue here as the rest. Getting "Operation not permitted" and permission errors

As I kept my local.prop as local.prop.bak, I renamed it back and restarted the phone, everything appears to have gone through now.
Thanks MT.

brad6360 said:
My USB connection is broken, so here is how I did it using terminal emulator.
1) Download the cwmrecovery.img to your SD. ( I downloaded MT's zip file and then extracted all with root explorer, but you only need the cwmrecovery.img file.)
2) Use root explorer to copy or move it to the /data/local/tmp directory (make sure permissions are set to r/w/exe).
3) Launch terminal emulator and type these commands:
su
mount -orw,remount /dev/block/system /system
mount -orw,remount /dev/block/data /data
dd if=/data/local/tmp/cwmrecovery.img of=/dev/block/mmcblk0p14 bs=4096
rm /data/local/tmp/* 2>/dev/null
4) exit terminal emulator and then reboot.
You can then try the vol down+power button combo upon boot to enter CWM.
Good luck.
Click to expand...
Click to collapse
How do you change the permissions of the /data folder to r/w/exe as you mentioned?
I am having a problem because I don't currently have the Local.prop file and I need to add it to that folder but I am getting a permission denied message.

Plumbert said:
How do you change the permissions of the /data folder to r/w/exe as you mentioned?
I am having a problem because I don't currently have the Local.prop file and I need to add it to that folder but I am getting a permission denied message.
Click to expand...
Click to collapse
I used the paid version of root explorer

[LP/MM] 5.1.1/6.0.1 [TWRP] XPERIA Recovery

GOT TROUBLE WHILE INSTALLING A RECOVERY? GET A WORKING TWRP RECOVERY AFTER 2 MINUTES ON YOUR XPERIA LOLLIPOP/MARSHMALLOW DEVICE:​:good:
open any root explorer app like ES FILE MANAGER
Delete /system/etc/mm_twrp_recovery folder
Go to /system/bin/ folder
Look for the "chargemon.stock" file - If it's present, delete this one: chargemon - and now, rename the chargemon.stock to chargemon
Look for the "taimport.stock" file - If it's present, delete this one: taimport - and now, rename the taimport.stock to taimport
Reboot
download "recovery fix.zip" from mega.nz
extract the file and run "adbrecoveryfix.exe" the .exe file will install some needed files (normally into C:\Minimal ADB and Fastboot\ )
copy the files from the folder "RECOVERY FILES" into the "Minimal ADB and Fastboot" Folder
connect your xperia with the pc
open the "m a a d" folder and then SHIFT+RIGHT CLICK to open a command window
now type:
adb shell
su root
mount -o remount,rw /system
exit
exit
install.bat
Click to expand...
Click to collapse
:victory:
don´t forget to press enter after "adb shell", "su root" and so on!
now your recovery will install again without any errors!
Another simple Method: thanks @meer_mortal
Delete folders and rename chargemon etc
Plugged phone into computer with dev settings, debugging etc
Open root explorer to make / -RW
Run install.bat with CMD
Boom! MM with TWRP
To get in into recovery reboot press down after green LED
Click to expand...
Click to collapse
DOWNLOAD:
https://mega.nz/#!NoVSlK5T!CPJDueW8nXiHEv-jjqo7U-CrrEa1nE2JTE8mWjn3NEs
Do not reupload or share wihtout my permission pls!
the recovery zip file isn`t flashable! it contains the needed adb drivers + the recovery files
Placing the recovery files correctly should look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

reserved

Youtube tutorial available soon

missing file?
Hi,
The command: su root results in su: not found.
Thanks,
Tim

tfcarlin said:
Hi,
The command: su root results in su: not found.
Thanks,
Tim
Click to expand...
Click to collapse
does your folder look like this?
https://postimg.org/image/6p58zcjn3/

tfcarlin said:
Hi,
The command: su root results in su: not found.
Thanks,
Tim
Click to expand...
Click to collapse
Maybe your antivirus blocking some files, just check it

freaky2xd said:
does your folder look like this?
Thanks, yes my folder looked like that. For better or worse I'm pass this point now so can't test. Thanks for the help!
Click to expand...
Click to collapse

wich TRWP version is on this fix?

not working for me.
recovery not working . I reboot the phone green notification lights up then pressed vol. down button, but no luck . pls help . THANKS...

Guys does anyone have a mirror to the mega link? It's expired

Not booting: Stock recovery but root

I´ve got root access on my device but i only have got the stock recovery of android 4.3. I am able to push an twrp recovery image to the tmp partition. Now my question is if i can flash the recovery by "dd if=/tmp/recovery.img of=/dev/????". Which partition is the recovery partition?
Thank you
Edit: I did cat /tmp/recovery.img >/dev/block/mmcblk0p1 and now there is a red string when i try to enter the recovery

@Simon_29
You didn't enter proper commands, Check attachment follow space and symbols.
-Place recovery.img in internal storage
-Download android emulator from playstore
-grant su access
-Type codes from attachment
-change recovery263 with current recovery name
That's it.
NOTE on't type adb shell if you're using terminal in phone.

Salman Al-Badgail said:
@Simon_29
You didn't enter proper commands, Check attachment follow space and symbols.
-Place recovery.img in internal storage
-Download android emulator from playstore
-grant su access
-Type codes from attachment
-change recovery263 with current recovery name
That's it.
NOTE on't type adb shell if you're using terminal in phone.
Click to expand...
Click to collapse
I wasnt able to boot the device... As I told i bricked the recovery. Now i tried to flash stock firmware with this tutorial https://forum.xda-developers.com/showpost.php?p=38838927&postcount=7 . I cant see the pictures so i dont know which i have to select. I tried it nevertheless but i got the error which you can see on the attached picture... Is there any other tutorial for flashing the stock firmware?

Why i am unable to see pictures on xda???

Salman Al-Badgail said:
@Simon_29
You didn't enter proper commands, Check attachment follow space and symbols.
-Place recovery.img in internal storage
-Download android emulator from playstore
-grant su access
-Type codes from attachment
-change recovery263 with current recovery name
That's it.
NOTE on't type adb shell if you're using terminal in phone.
Click to expand...
Click to collapse
Edit: Fixed it I went back to stock rom.
The clockwork mod install app for the 4x hd was causing this. I now used the twrp manager and even it said that it failed it worked for me. Thanks for your post anyway and that you could solve the error of xda

Simon_29 said:
Edit: Fixed it
Click to expand...
Click to collapse
Great to see that, I am having problem in attachments I already informed in xda tech dept hope they will fix it soon.
This was the image I tried to attached in my above post. You can edit your title as
[SOLVED] Not booting: Stock recovery but root as this might help someone who need helps and can follow instructions.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks