Hey!
I thought of something. Perhaps someone could make a mould with the original back cover, and then remake it out of aluminium. That's all.
ridder215215 said:
Hey!
I thought of something. Perhaps someone could make a mould with the original back cover, and then remake it out of aluminium. That's all.
Click to expand...
Click to collapse
I would buy this in a heart-beat.
Wouldn't heat be an issue? My play can warm up a little bit just being idle in my pocket on a warm day.
Aluminum would help dissipate the heat quicker than the plastic cover which is more of an insulator.
I have doubts though about the durability and strength of a similarly thick aluminum cover. It would have to be much thicker than the plastic one to be of an protection.
Theres already one on ebay just search it
sent from my Xperia PLAY running DiXperia
All those on ebay are cases for the phone, i think we're talking about a replacement back panel here.
What i would REALLY like to see is a complete housing in aluminium, preferably anodized matte black.
Or somethign like the HTC one's body: http://www.tomsguide.com/us/HTC-One-S-Strong-Case-Ceramic-Metal-Process,news-14451.html
question is how will you put it on without damaging the tabs on the phone? we are able to put the back cover because it is flexible.
AudioCreaper said:
question is how will you put it on without damaging the tabs on the phone? we are able to put the back cover because it is flexible.
Click to expand...
Click to collapse
Very good point. Press tabs will require a flexible material like plastic. Most metal panels i've seen fit with a sliding lock.
This is one project that doesn't seem likely to see the light of day...
I was indeed thinking of a back cover replacement, and with an airbrushed-like look.
Aluminum cases produce Faraday cages (basically the device becomes shielded from radiation, including the wifi and 3g waves). Apple (first iPad 1 batches) and particularly Asus (Transformer Prime) have learnt that lesson at high costs.
doesn't the htc one that i mentioned earlier have an aluminum shell?
julianpaul said:
doesn't the htc one that i mentioned earlier have an aluminum shell?
Click to expand...
Click to collapse
Xperia play antenna placement is probably not optimised for a metal housing. The Sony Xperia S would have more luck on that matter due to it's (semi) external antenna.
+1 on the antenna topic. I dismantled my Play once and the antennas are on the back, it would be a very bad idea to use an all-aluminium back cover, unless you don't use 3G, wifi, GPS, etc...
I wish they had use the chrome all around, not just the sides, even if its fake chrome.
eksasol said:
I wish they had use the chrome all around, not just the sides, even if its fake chrome.
Click to expand...
Click to collapse
You're kidding right? You actually want an all-chrome phone?
I'd actually rather see Xperia PLAY get a battery cover that's made out of a grip-improving non-glossy matte material (like what the Xperia X10 has).
The Xperia Play battery cover is one of the worst parts of the phone. It's flimsy, plain and it attracts grime like a magnet. They need to improve it badly in a second iteration...
My favorite battery cover was the one on the Huawei Selina. While the phone itself is a piece of crap, the cover is firm, nice to handle and easy to remove.
Except for the chrome strips on the sides (and they weren't that bad), my zte blade/orange san francisco had such a nice rubbery matte finish. i hope manufacturers finally do the sensible thing and shift to matte finishes...
Metal Aluminum Plated Case for Sony Ericsson Xperia Play
Silver
http://www.ebay.co.uk/itm/Metal-Pla..._MobilePhonesCasesPouches&hash=item415c24d0c1
Black
http://www.ebay.co.uk/itm/Metal-Pla..._MobilePhonesCasesPouches&hash=item3cbaa0c03e
Related
I guess it is due to the camera part of the outer shell got friction between my pants pocket...
the transparent plastic pad got many tiny scratch now, so the image passed through the lens is shown very vague on the screen.
Should I use sand paper to rub or grind it until it is smooth ?
or are there any parts can be replaced ?
Thanks for your reply !
Absolutely do NOT use sandpaper on it!
Aside from trying to find a replacement part through HTC, there are a few products that advertise the ability to fill in scratches in plastic.
I use Plexus, which is usually sold at motorcycle shops. It's used to buff out scratches in plexiglass (the material used in motorcycle windshields, which is a form of plastic). I also use it on compact discs to buff out fine scratches.
i would push the transparent plastic pad out of your back cover completely, the camer works much better without this lens cover on.
flashy said:
i would push the transparent plastic pad out of your back cover completely, the camer works much better without this lens cover on.
Click to expand...
Click to collapse
I agree, much better pictures without a 0.5 mm thick plastic layer in the middle. Anyway, there are some online shops that sell HTC TyTN II battery cover replacements. I remember seeing one in Expansys.
Do what I did in these thread. Guaranty you will be happy with your camera.
http://forum.xda-developers.com/showthread.php?p=2773949
Thanks
I received yesterday my protection for Leo. I share with you the results of this:
http://www.flickr.com/photos/[email protected]/show/with/4210742282/
For shipping this protection:
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000801&products_id=26364
Thanks for sharing; however you would have been better off posting in the Cases thread where we all go to see what's happening in the world of cases.
WB
Agree with above poster, can a mod fix this?
Nice case! ive also ordered 1 last week at PDAir, the 1 without a screen, so easy acces, but fewer protection. I am hoping its more solid so i can put it in my back pocket without getting a red face everytime i realize i accidently put it there...
When did you order it and did it took long (i am eager to get mine, but now hope is gone till monday or tuesday...)
I disagree.
The "Cases" thread is too long and too complicated for discussing any one specific case.
Anyway I ordered mine just a moment ago and would very much like to hear how quick was the shipment, how snug is the fit and how reassuring the neoprene feels
It's a shame they opted for a plastic screen protector instead of either a window-less aluminum door or a transparent cover that lets you work with the touchscreen.
mohasea said:
I received yesterday my protection for Leo. I share with you the results of this.
Click to expand...
Click to collapse
mohasea,
How thick is the plastic cover over the screen?
Does the plastic cover flex?
Do you think the plastic cover would prevent the screen being cracked if dropped screen down on ummm concrete?
Duperman said:
It's a shame they opted for a plastic screen protector instead of either a window-less aluminum door
Click to expand...
Click to collapse
I totally agree, wish they had a solid aluminum front door instead of the window cut-out covered in plastic or the other option they have of no plastic window cut-out. I would order one now,even not having my Leo yet, just because the front door was solid aluminum.
I am going to contact PDair and see if they would leave a few front doors out of the cnc cutter and have a full cover aluminum
Would you like one too, Duperman ?
Thank you,
Monnie
I have ordered an open screen case despite it may not fully protect the screen. HD2 has a glass screen and it is hard enough against scratch as what has been in iphone.
Would you like one too, Duperman?
Click to expand...
Click to collapse
Absolutely
Mine, the one without screen plastic, is supposed to arrive between now and Jan 27th next year...(sometime)
take care
Anyone got theirs yet?
Would love to see some detailed photos and a review of the case pros/cons
Thank you,
Monnie
I'm debating whether to go with their leather flip case or this aluminum case...
I got this case and immediatly wished there was no plastic screen on the front door. So, I held it over some boiling water for about 2 mins and and then used my thumb nail (not kidding it was easy) to pry the plastic from the metal. The whole lot peeled off easily, i replaced the foam into the case and BAM perfect case. (be careful not to rip the foam, but if you do it will still stick back. also the foam stretched out a bit but pushed back into shape no problem. TIP: Work from the front side of the case, wedge your nail into the seem and loosen it all the way around. If it starts to get tough again, hold it over steam for a while longer.
Also.. when the plastic was still inplace and the case door was closed, there would be random screen presses and that was not cool, however now that the plastic is out, i can leave the door closed, press when I want too, AND there is no random case presses
I know this sounds like a poor fix, but it worked awesome and it looks like it was SUPPOSED to come this way.
Now all i need is for my zag shield (front only) to show up and im perfectly protected (minus water damage dammit)
awesome case guys im not kidding. you dont have to put the nubbin on in the back either so it doesnt add much bulk to teh phone. good luck yo.
Got mine too and I use the black open faced aluminum for local use and insert the whole unit;
aluminum case and all into the Maxpedition "Rat" wallet for carrying on belts etc.... http://www.maxpedition.com/store/pc/...&idcategory=11
Like it alot....
FWIW
well, do not kill me if I say so .. but it is ugly as hell.
I do not say that it does not protect the phone, or the the finishing it's not ok .. but from a slim phone with a huge screen, it looks like a bullet proof brick with a screen.
The whole idea of an elegant smartphone it's gone.
Small question: what do you hate about the original leather case?
It is elegant, slim easy to use and protect the phone in normal use conditions or small accidents.
Capdase Alumor Metal Case
Bought this silicon w/ aluminium backcover case by CAPDASE in Hong Kong, adding a more "solid" feel over the pure silicon case. It comes with a CAPDASE screen protector as well.
http://www.mobimega.com/capdase-alumor-metal-case-htc-hd2.html
Beware that the silicon case may not glue well to the aluminum backcover (I think it's the factory problem) which may leave a small gap between them when you put the phone in. I have to apply some glue to fix that myself. Apart from the case is nice and not too costly.
byronlee said:
Bought this silicon w/ aluminium backcover case by CAPDASE in Hong Kong, adding a more "solid" feel over the pure silicon case. It comes with a CAPDASE screen protector as well.
Beware that the silicon case may not glue well to the aluminum backcover (I think it's the factory problem) which may leave a small gap between them when you put the phone in. I have to apply some glue to fix that myself. Apart from the case is nice and not too costly.
Click to expand...
Click to collapse
Hi,
I am seriously thinking about ordering one for my Desire (A8181).
But what I'm not able to find, is how it works. I mean, you seem to describe the case as a silicone skin, with a metal plate sticked to it.
I thought it was more like a silicone skin with another semi-case to "clip" over the silicon....
Can you confirm if I am right or wrong?
And can you post multiple angles pictures?
Thank you, it would be much appreciated!
thanks but
so uglly
Ohh Great!
Thanks for the pictures! To me is one of the best cases i've ever seen.
http://www.skinomi.com/sk11349-google-nexus-7-brushed-aluminum-skin-protector.html
I've been looking for a protective case made out of aluminium but no luck, I prefer an aluminium back as it makes the protect look more polished. I did however come across this but I'm worried about it affecting the performance of the nexus as it sticks right onto the back. I'm also worried that it may leave a sticky residue behind if I ever decide to take it off. What do you think?
McAfee says the site is safe and it all looks legitimate.
P.s The case makes it look ****ing sexy.
That looks like the real deal- full metal not like this $15 POS pretender that's 100% plastic w/a stick on metal sheet claiming to be aluminum: http://www.amazon.com/dp/B008NMCPXW/ref=cm_sw_su_dp
Yours looks like a quality item- Might be worth a try for $25...
Isn't that just one of their skins that is brushed aluminum in color? They have others that are wood grain, carbon fiber, and brushed steel. I could be wrong though.
I have used a similar thing with my Fujitsu Pocket Loox before and I didn't like it. First, it was slippery, second it was so cold during the winter time, and third it affected the GPS reception.
So that is not for me this time.
Tablet manufacturers don't choose plastic housings just because they're cheap. Most wireless signals, such as Bluetooth, GPS, Wifi, and even NFC will get scrambled or blocked by a metal backing. Asus suffered a lot of criticism with the Transformer Prime because the aluminum shell was killing the GPS.
That said, Skinomi doesn't use real metal anyway. It's just plastic with a metal texture.
Well it didn't hurt the ipad's performance as long as designed carefully I must say.
I really thought this is the one I was looking for when I read the title. I guess I can settle for a "faux" aluminum for now. Call me OC but I like my devices, (laptop, cellphones, mp3 player, mobile 3g wifi, ipod touch, headphone amp, portable speakers even, etc. etc.) brushed aluminum themed. There is something about the mix of black and aluminum that I like. I guess the cupertino people hit the nail in the design department for me.
Sent from my Nexus 7 using xda app-developers app
That isn't a case at all, it's a SKIN with a brushed aluminium pattern on it.
m3ta1head said:
That isn't a case at all, it's a SKIN with a brushed aluminium pattern on it.
Click to expand...
Click to collapse
Read the desc., it basically says i'm looking for a aluminium case and have only found this.
This is a skin, its a vinyl sticker..
regalpimpin said:
This is a skin, its a vinyl sticker..
Click to expand...
Click to collapse
Once again, i was looking for back cover but couldn't only find this, hoping that somebody will know where to buy an aluminium back cover.
Doubt you are going to find one. The back cover has antenna connections in it. The best you will find is a fake skin or an OEM replacement cover.
Sent from my Nexus 7
krelvinaz said:
Doubt you are going to find one. The back cover has antenna connections in it. The best you will find is a fake skin or an OEM replacement cover.
Sent from my Nexus 7
Click to expand...
Click to collapse
I figured that, there is also a aluminium case option, however this may effect the performance of nfc and gps. Poetic has one but its ruined by an ugly sticker.
i.amtom said:
I figured that, there is also a aluminium case option, however this may effect the performance of nfc and gps. Poetic has one but its ruined by an ugly sticker.
Click to expand...
Click to collapse
I have it...its plastic ..fake aluminum :/ lol
Sent from my Nexus 7 using Tapatalk 2
http://db.tt/xI7XbCWS
pic of sticker being removed. Think I'll put a vinyl the same size with nexus cut out of it. Then it's all good.
Sent from my Nexus 7 using Tapatalk 2
mariolouis said:
Well it didn't hurt the ipad's performance as long as designed carefully I must say.
Click to expand...
Click to collapse
Right, that is why they have the apple logo on the back of the iPad. Under there are the radio antennas. That way the radio signals don't get attenuated.
Has anyone seen a metal (namely aluminium) back cover for the G4? I have access to a CNC machine and wouldn't mind a DIY project if its possible, but I don't want to reinvent the wheel. Has anyone seen anything other than plastic/leather/carbon fibre anywhere? I looked around the forums, ebay, and various modding communities but haven't seen one other than the aluminum bumper case. I'm thinking just a single piece for the cover made out of aluminum that snaps in. It may be tougher to remove than plastic/cf that bends in case I need to remove the battery/microsd but I'd be willing to put up with that (like back in the day on the HD2).
I have not seen one and I'm thinking it would have a very negative effect on reception.
I have not seen and is it necessary to protect LG G4 by metal case?
About the closest you're going to get is a SlickWrap. They offer high quality stick on material to give the phone a different look. Carbon Fiber, Metal, Leather, etc, are some of the materials they offer.
Seen a few on ebay;
http://m.ebay.com/itm/Luxury-Motomo...Skin-Case-Cover-For-LG-G2-G3-G4-/141644206601
http://m.ebay.com/itm/LG-G4-Dual-La...etallic-Extreme-Anti-Shock-Skin-/381236860963
http://m.ebay.com/itm/LG-G4-Dual-La...reme-Anti-Shock-Protection-Skin-/381330592384
Edit: just realized youre probably asking for an actual battery cover and not a case..
FlawlesStyle said:
Has anyone seen a metal (namely aluminium) back cover for the G4? I have access to a CNC machine and wouldn't mind a DIY project if its possible, but I don't want to reinvent the wheel. Has anyone seen anything other than plastic/leather/carbon fibre anywhere? I looked around the forums, ebay, and various modding communities but haven't seen one other than the aluminum bumper case. I'm thinking just a single piece for the cover made out of aluminum that snaps in. It may be tougher to remove than plastic/cf that bends in case I need to remove the battery/microsd but I'd be willing to put up with that (like back in the day on the HD2).
Click to expand...
Click to collapse
Where did you find the carbon fiber back?
Why not just paint a plastic cover chrome?
I haven't seen it, even i have three different G4 wireless charge back case( i got it as a honest review). i have tired plastic and FPC raw material. prefer plastic one. because FPC is very easy to break.
Metal ones won't exist, and if they do, they won't last very long. Can you imagine having to pry off a metal back that's thin? It would bend and you'd never be able to use it again :-\ ... Imagine how you take off your plastic / leather backs, bending it a lot. Now imagine doing the same with a metal one xD
metal will also screw up the nfc
Sent from my LG-H815 using Tapatalk
I remember I had one for my Galaxy Note 2. It worked pretty good and my service was pretty much the same too. Only problem was it was a little more difficult to remove than the normal plastic back because it was much more sturdy then the original back. Got it off EBay.
afrojoc said:
I remember I had one for my Galaxy Note 2. It worked pretty good and my service was pretty much the same too. Only problem was it was a little more difficult to remove than the normal plastic back because it was much more sturdy then the original back. Got it off EBay.
Click to expand...
Click to collapse
Wouldn't it also help with heat dissipation? I'm thinking of getting one now for this very reason. Not that the phone gets all that hot, but a cool phone is a happy phone, and it would act like a heat sink, I would think...
HI folks, I've found the back of my X Compact to be pretty bad at collecting scratches - much worse than my Lumia 720 (wish more manufacturers would copy that design idea of a replaceable body!!) Anyway, I want a protective and/or grippy sticker of some sort. Ebay and Amazon have nothing to offer so far as I can tell, apart from metal plates for magnetic dash mounts. Any ideas? I would have thought there would be some kind of rubber sticker you could buy but no luck. Any ideas?
nemov said:
HI folks, I've found the back of my X Compact to be pretty bad at collecting scratches - much worse than my Lumia 720 (wish more manufacturers would copy that design idea of a replaceable body!!) Anyway, I want a protective and/or grippy sticker of some sort. Ebay and Amazon have nothing to offer so far as I can tell, apart from metal plates for magnetic dash mounts. Any ideas? I would have thought there would be some kind of rubber sticker you could buy but no luck. Any ideas?
Click to expand...
Click to collapse
Just type xperia x compact skinobi in amazon. They make full body skins for the phone. I think amazon only carries the clear and carbon fiber one though. You can also google skinobi and their website will pop up with more styles/options.
nemov said:
HI folks, I've found the back of my X Compact to be pretty bad at collecting scratches - much worse than my Lumia 720 (wish more manufacturers would copy that design idea of a replaceable body!!) Anyway, I want a protective and/or grippy sticker of some sort. Ebay and Amazon have nothing to offer so far as I can tell, apart from metal plates for magnetic dash mounts. Any ideas? I would have thought there would be some kind of rubber sticker you could buy but no luck. Any ideas?
Click to expand...
Click to collapse
I am using a Cut it yourself type plastic screen protector i got from Walmart....it's flawless
Hi,
in germany there is a frim which produce curved foil for the front and backside :
https://www.amazon.de/gp/product/B06XZCD6ZG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
The problem is, that die foil isnt hard. So if you have bubbles under the foil and you press to much, the foil get damaged. I try ist with a little less power and the last bubbles gone away from semself after 2 days. It protects the full screen und full backcover.
Greetings Kullino
I got this skin for the back of my phone, which makes it much easier to hold and resists fingerprints a lot better than the shiny back. It also came with stickers for the sides, but I just used the one for the back, which adds texture and friction.
http://www.skinomi.com/sk27116-xperia-x-compact-phone-brushed-steel-protector.html
bofis said:
I got this skin for the back of my phone, which makes it much easier to hold and resists fingerprints a lot better than the shiny back. It also came with stickers for the sides, but I just used the one for the back, which adds texture and friction.
http://www.skinomi.com/sk27116-xperia-x-compact-phone-brushed-steel-protector.html
Click to expand...
Click to collapse
Would you mind uploading a picture of your phone as it currently is?
kwstas 13 said:
Would you mind uploading a picture of your phone as it currently is?
Click to expand...
Click to collapse
sorry this took so long, here's the back sticker. I've actually now put on the additional ones on the sides for extra friction in my car dock (it was sliding down with each bump, but holds better now)
bofis said:
sorry this took so long, here's the back sticker. I've actually now put on the additional ones on the sides for extra friction in my car dock (it was sliding down with each bump, but holds better now)
Click to expand...
Click to collapse
Really nice man, thanks for uploading those ones
nemov said:
HI folks, I've found the back of my X Compact to be pretty bad at collecting scratches - much worse than my Lumia 720 (wish more manufacturers would copy that design idea of a replaceable body!!) Anyway, I want a protective and/or grippy sticker of some sort. Ebay and Amazon have nothing to offer so far as I can tell, apart from metal plates for magnetic dash mounts. Any ideas? I would have thought there would be some kind of rubber sticker you could buy but no luck. Any ideas?
Click to expand...
Click to collapse
Very late response, but I've been using TPU case which protects back, sides, and gives a very small lip on front to keep screen off flat surface if laid on face.
https://www.amazon.com/gp/product/B01M1HIQ5C/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
case is soft and grippy, very happy with the result after 6 months.
very inexpensive <$10.
No need; apply wax polish. I used Novus Fine Scratch Remover (#2), but I would think car wax would work just as well. I used it to remove some marred patches from when I dropped the phone on hardwood floor and it skidded a bit, and not only did those patches disappear, but so did the fine scratches.
I don't think this would be wise for the screen, however, as it would probably harm the oleophobic coating.