The first custom kernel for HTC Desire C on xda. This kernel is a work in progress with very few features at the moment, I will add more as I go along.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features as of now (not many):
Unsecure boot.img
Smartass Governor added
InteractiveX Governor added
SmartassV2 Governor added
SavagedZen Governor added
initramfs - your ROM must have busybox
Upcoming features:
Overclock
init.d support (forgot to add)
Lagfree governor
BFQ Scheduling
The changelog is available on the second post
DOWNLOAD
You must have adb and fastboot configured, put boot.img in fastboot folder and make sure your device is in the bootloader then type command
Code:
fastboot flash boot boot.img
and then:
Code:
fastboot reboot
Your device may reboot a couple of times before fully booting
After you have installed try my ROM http://forum.xda-developers.com/showthread.php?p=29256441 or look through the index for others
If you like it hit thanks or consider donating to help me get this device
Changelog
Code:
[B][U]Beta 1[/U][/B]
Initial work
Good work on the development! However, after I flashed I only see ondemand, userspace and performance govenors. Haven't reflashed the slim rom yet - is this necessary?
Probably something wrong on my side, I'll take another look later today after work
Great.... finally some excitement in desire c. Keep up the good work.
Sent from my Galaxy Nexus using Tapatalk 2
Narathan said:
Good work on the development! However, after I flashed I only see ondemand, userspace and performance govenors. Haven't reflashed the slim rom yet - is this necessary?
Probably something wrong on my side, I'll take another look later today after work
Click to expand...
Click to collapse
Is the WiFi working? And no, you don't need to flash Slim ROM again.
Sent from my Nexus 7 using XDA Premium HD app
mmmcfc said:
Is the WiFi working? And no, you don't need to flash Slim ROM again.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
Wifi works great, no drops or whatsoever. I don't find any issues so far.:good:
Narathan said:
Wifi works great, no drops or whatsoever. I don't find any issues so far.:good:
Click to expand...
Click to collapse
Were the other governors available when you checked the second time?
mmmcfc said:
Were the other governors available when you checked the second time?
Click to expand...
Click to collapse
After reflashing the rom, wifi broke and I still see the three previous mentioned governors. Does it help mentioning I'm running the EU version? Best of luck!
After flashing nfc support is gone. I was using o2 uk branded from. Rest all working perfectly. Those who are having wifi need to flash relevent boot loader. Go to modco thread its already there
Sent from my Galaxy Nexus using Tapatalk 2
Goveners?
hi i am using your slim sense rom with this kernel but i cant use the smartass governer can you help me please
Update the download link please.
thebuginyou said:
Update the download link please.
Click to expand...
Click to collapse
This is dead. Update link will not be updated.
Related
The NightOwl CM rom series are fantastic so I make a few kernels for myself and to give more options for Note users to play with. I am quite happy with these kernels! :victory::victory::victory:
1. Forest-M-kernel for NightOwl CM13!
2. Forest-LP-kernel for NightOwl CM12
3. Forest-KK-kernel for NightOwl CM11 (second post)
Credit should go to @bauner who has done the hard and excellent job with the NighOwl rom and kernel. I only make minor kernel tweaks.
Code:
Disclaimer:
/*
* I am not responsible for bricked devices, dead SD cards, dead cats,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh
*/
What this kernel adds:
Change log:
- Remove kernel debugs to reduce kernel load. Logcat is kept so that you can make log.
- OC CPU to 1600 Mhz in P (powerful) version.
- Play with different toolchains. Currently using Uber toolchain. Will play with Hypertoolchain (to do)
- Play with GPU (to do)
- other minor tweaks
Instruction:
- Flash the kernel zip file in recovery
- Reboot, then use No-frills CPU control to set CPU frequency and desired governor/scheduler.
- Pegasusq/Row combo seems to be very good.
- Enjoy! :victory:
Downloads:
Forest-M-kernels:
Forest-M-kernel_V1S (standard version)
Forest-M-kernel_V1P (OC-CPU version)
Forest-LP-kernels:
Forest-LP-kernel_V6S (standard version)
Forest-LP-kernel_V6P (OC-CPU version)
Credits and thanks:
[SIZE="2" [user=799465]@bauner[/user][/MENTION][/MENTION][/SIZE][/COLOR][/B]
[B][COLOR="DarkRed"]@Geckodev
@Phil3759
and many other great XDA members which I may have forgotten
Source:
https://github.com/Forest1971/Forest-M-kernel_CM13-N7000
Remember to press thank button if this helps you!
This post is for Forest-KK(CM11)-Kernels!
Code:
Disclaimer:
/*
* I am not responsible for bricked devices, dead SD cards, dead cats,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh
*/
What does this kernel add?
Changelogs V9:
- Rebase to TW source by @bauner
- disable kernel debugs
- compile using Uber toolchain
- OC CPU to 1600Mhz in V9P version
- Other minor tweaks.
I feel happy with the new kernel versions. They are both silky smooth! :victory:
Instructions:
- flash in recovery
- Remember to use No-Frills to set correct cpu frequency, and governor/scheduler!
Downloads:
Forest-KK-kernel_V9S
Forest-KK-kernel_V9P
Credits to:
@bauner
@GeeckoDev
@others
-----------------------------------------------------------------
Change log V8_T
- Reduce aggressiveness of PegasusQ governor for stability.
Change log V7_T
1. Reverse CPU OC. Now us standard CPU 1400hz
2. Implement OC of OLED panel to 59hz and included the gralloc fix modules for those rom where the code has not been merged (credits to @GeeckoDev)
Changelog of Forest-KK-Kernel_V6_T:
1. Added trim support: to ensure smooth running and fast backup-restore. (credits to @Lanchon) More on trim look at this post
2. Merged FPBug fix: to fix the music stop bug by @Lanchon and @zeitferne. For details look at this thread
3. Rework GPU to three steps: 134-200-267 Kernel now run smoother and cooler than V5 while still handle heavy games easily!
4. Re-enable logcat function (which was disable in earlier version)
5. included OC CPU and Philz recovery as in earlier version
The kernel is extremely smooth and running cool! CM11 should be indeed stable now!
Change log for earlier versions:
1. Add Philz Touch 6 recovery version 6.30.8 (CWM v6.0.4.8)
2. Add option for OC CPU to 1.6 GHz (from V3)
3. Add OC GPU with 4 steps: 134-200-267-333 (from V5)
2. Disable all kernel debug and logging
3. Some other tweaks of config file
For me:
- It runs smoother, cooler and more battery friendly than stock version.
- With V3b and V5, OC to 1.6GHz the phone is fast and silky smooth! :victory: Heavy game also play smoothly now :victory:
- And you have the beautiful Philz Touch recovery which can also be used to flash any other KK roms.
Important note:
- There are 3 versions for CM11, Omni and Slim you need to use correct version for your rom.
- For those who want even better battery life, follow the simple but effective tips from @NoteboyTech here: http://forum.xda-developers.com/galaxy-note/general/how-to-increase-samsung-galaxy-note-t2820862
Instruction:
- Flash the kernel zip file in recovery
- Give some time for kernel to settle and enjoy! U may want to to one manual trim after flashing for more smoothness!
My favorite settings:
- Governor/Scheduler: Pegasusq/Row
- CPU min 200 Mhz max 1600 Mhz.
Downloads:
V8T announcement and download link is here: http://forum.xda-developers.com/showpost.php?p=58461272&postcount=702
V7T announcement and more details change log is he : http://forum.xda-developers.com/showpost.php?p=58036669&postcount=619.
- V7_T for CM11: http://www.mediafire.com/download/uqdjh38728q81g9/Forest-KK-Kernel_V7_T_CM11-59hz.zip
- V7_T for Omni: http://www.mediafire.com/download/a6wlva4k2fjn9fu/Forest-KK-Kernel_V7_T-Omni-59hz.zip
- V7_T for Slim: http://www.mediafire.com/download/x325io293l8fz97/Forest-KK-Kernel_V7_T-Slim-59hz.zip
-------------
- V6_T for CM11: http://www.mediafire.com/download/3163aluzkyzlxxy/Forest-KK-Kernel_V6_T_CM11.zip
- V6_T for Omni: http://www.mediafire.com/download/yw9dmagh658hwac/Forest-KK-Kernel_V6_T-Omni.zip
- V6_T for Slim: http://www.mediafire.com/download/5vger45tmjpmf0s/Forest-KK-Kernel_V6_T-Slim.zip
V5 for CM11-base roms is here: http://forum.xda-developers.com/showpost.php?p=53937507&postcount=377
V5 variants for Omni and Slim roms is here: http://forum.xda-developers.com/showpost.php?p=54180178&postcount=438
V4: links are here: http://forum.xda-developers.com/showpost.php?p=52931737&postcount=276
V3b: http://www.mediafire.com/download/t1imczaknfmid69/Forest-CM11-kernel-V3b.zip
V3: http://www.mediafire.com/download/hdlo8b5t1gzf1du/Forest-CM11-kernel-V3-linaro.zip
V2: http://www.mediafire.com/download/tpm2qxx02pbq6pd/Forest-CM11-kernel-V2.zip
V1: http://www.mediafire.com/download/s4h40nucy88kf6b/Forest-CM11-kernel-V1.zip
Credits and thanks:
CM Team for their legendary work
@Phil3759 for his wonderful recovery
@Shoey63 (huge) for his handy guide and tips for me
@Lanchon for Trim and FPBugfix
@zeitferne for FPBugfix version2.
@Geckodev for handy build script and other kernel tweaks
@neobuddy89 for handy build script
@Linaro Team for their great toolchain!
@Gustavos for some codes from his kernel source!
Many other great XDA members which I may have forgotten
Source:
https://github.com/Forest1971/forest-cm11
Remember to press thank button if this helps you!
thanks mate ill test it on pa and will give feedback soon
edit:- it works :victory: now the rom is more super smooth :good:
Great! Tks mate!
Sent from my GT-N7000 using Tapatalk 2
Thanks! Very timely release as I'm currently having problems with overheating and severe lag and was about to replace the ROM.
Confirmed to be working on C-ROM v5.19 CM11 KK custom ROM. Too early to report any bugs (if any) but so far it appears to be a lot smoother than the previous kernel I used. Will revert for any issues found (again if any) but assume no news again from me means good news!
thanks bro i'll install it right now
---------- Post added at 10:38 PM ---------- Previous post was at 09:47 PM ----------
working like a charm bro, no issue at all
(tested on CM11 build of 04/11)
keep up the good work :good:
This is what we are waiting for! Time for some testings. thanks forest.
Update:
Battery drain is mostly behaving like Forest TW/JB kernel which is promising. After 9 hours installed mostly 6 hours in deep-sleep, OC'd at 1.2GHz, & GSM in 2G/3G only lost 4% which for this device is pretty impressive considering that kernel should still be in settling stage.
Oh, and yes N7000 is not even warm while screen is continuously on. Otherwise, previous kernels would heat up device and cause lag then freeze. Pretty cool for an initial release! Thanks a lot @forest1971!
Seems to work fine on Carbon ROM too. Haven't tested for long, will report later if something goes wrong.
This probably works on any other relatively CM-based ROM, too. Like MoKee and PAC and Nameless. Probably.
LAKAME_MAN said:
Seems to work fine on Carbon ROM too. Haven't tested for long, will report later if something goes wrong.
This probably works on any other relatively CM-based ROM, too. Like MoKee and PAC and Nameless. Probably.
Click to expand...
Click to collapse
Good to know i works in more KK roms. Please test on other roms if possible. Tks.
Sent from my GT-N7000 using Tapatalk 2
Yo bro... the reason for upgrading to Sokp now is here... welcome me lolz.. will test your stuff here too... thanks for this, why didnt you tell me about this?? Anyways thanks bro..
Sent from my GT-N7000 using XDA Premium 4 mobile app
NoteboyTech said:
Yo bro... the reason for upgrading to Sokp now is here... welcome me lolz.. will test your stuff here too... thanks for this, why didnt you tell me about this?? Anyways thanks bro..
Sent from my GT-N7000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The idea come out very recently and I was thinking you stick with tw rom !
Btw, you need to explore the cm11 roms, make some customizations to suit your likings then you will love it much better than tw. Cheers.
Nic3 idea.. i will make a switch to aosp in 2 days tomorrow i have an exam so i will input my views then... anyways thanks
Sent from my GT-N7000 using XDA Premium 4 mobile app
working great on CarbonROM 0502. only the color mode setting (in Display -> Advance Display -> mode) not able to set to "Natural". I like that color mode. However, not a big deal. Overall feel the ROM running smoother. Camera working ok, dialer working fine. Thank you.,..
yewnen said:
working great on CarbonROM 0502. only the color mode setting (in Display -> Advance Display -> mode) not able to set to "Natural". I like that color mode. However, not a big deal. Overall feel the ROM running smoother. Camera working ok, dialer working fine. Thank you.,..
Click to expand...
Click to collapse
That seems to be due to the rom since I can choose that option in CM11 newest nightly. cheers.
Its not working on mokee os, to many force close
Sent from my GT-N7000 using Tapatalk
bimasakti85 said:
Its not working on mokee os, to many force close
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Ok. Noted and thanks for testing.
Sent from my GT-N7000 using Tapatalk 2
Hi forest1971,
Congratulations for this great work, I tested the kernel with 4.4.2 Mokee n7000 14/05/01 RELEASE and after reboot system UI has stopped
Currently I'm testing with C-RoM 6.2 and works great :fingers-crossed:
Tegrak Overclock Ultimate does not work I get error error:-2000. You can do something to work Tegrak Overclock Ultimate?
Thanks again :good:
Working great on Carbon ROM.
And +1 for the ability to OC if possible. We lost that long ago.
Thank you for still working on the N7000.
SirRhor said:
Working great on Carbon ROM.
And +1 for the ability to OC if possible. We lost that long ago.
Thank you for still working on the N7000.
Click to expand...
Click to collapse
OC is in the to do list
Sent from my GT-N7000 using Tapatalk 2
dragonhart6505 said:
Side note: if you guys visit the site could you do us a solid and click on an ad? It takes 2 seconds and is a chance to support us with basically a free "donation". We have big plans for our site, though it may not look like much now. Anyway, every click is another few cents towards hosting and gives us a boost in confidence that were doing a great job on these releases. Thanks for your support and much more to come!
Click to expand...
Click to collapse
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked phones, ISIS invasions, ebola outbreaks,
* or any other major catastrophe encountered while running my kernel.
* You flashed this, you did this to yourself. You did this to us all.
* The world shall stone you to death for your crimes against humanity.
* If you want to blame someone, blame my twin, he's evil!
*
* BASIC ADB/FASTBOOT SKILLS REQUIRED
*/
Links:
* V2.6.1: Over on our mobile site
http://m.htcdevserv.com
* V2.6.0: Head over to our mobile site!
http://m.htcdevserv.com
* V2: Head over to my new site!
http://htcdevserv.com
* V1: http://forum.xda-developers.com/devdb/project/dl/?id=10188
MD5sum of original file (please verify): fb85dff3936a9d9cbf39c2f56c1e44eb
* V0: http://forum.xda-developers.com/devdb/project/dl/?id=10134
MD5sum of original file (please verify): 9f9f94df33c22e95ed42636b0a80eaa3
Changelog:
V2.6.1:
* Choice between msm_hotplug and Intelli-Plug!
* Intelli-thermal
* LCD Notify driver
* USB Fast Charging
* Initial F2FS support
* SELinux set to permissive
* Changed boot defaults
* More CPU Boost options
V2.6.0:
* Added back ExFAT support (SD Cards over 32 GB!)
* Fixed links2sd and apps2sd
* CPU-Boost fixed (Use "Kernel Adiutor" to configure)
V2:
* Boostactive governor
* Touch-boost
* Open Source Wifi Module (Prima)
* 192 MHz Deep Sleep
* Vibration Control
* Sound Controls
* Faster KSM (different than pattyboi's and because of that, a bit slower im sure)
* Intelli-Plug
* Removed Swap
V1:
* F2FS support
* Added SuperSU
* Busybox included
* Gamepad drivers
* GPU idles at 200MHz
* Tweaked GPU Behavior
V0:
* Initial release
* CPU Boost
* CPU Govs
* I/O Schedulers
* Embedded apps
Current bugs:
* You tell me...
Does front face camera work? I just flashed this kernel and can't seem to swipe over to the front camera.
It doesn't. That's the only bug I can't seem to squash. I'm currently working on it right now.
Sent from my XT1028 using XDA Free mobile app
https://docs.google.com/file/d/0BxKdyS6nmDayYld1cjUwbl9Rblk/edit?usp=docslist_api
Stock kernel ^^^
put in twrp backup folder and restore.
Sent from my XT1028 using XDA Free mobile app
Is write protection removed?
huggs said:
Is write protection removed?
Click to expand...
Click to collapse
Why yes it is
Sent from my XT1028 using XDA Free mobile app
rbheromax said:
Features:
Embedded Apps in /app: (look using ES File Explorer) Flappy Bird (original), Floating Calc, Performance Control
SickSky Launcher,Terminal Emulator, Xposed Installer
Govs: interactive,conservative,ondemand,wheatley,intelliactive,lionheart,performance
Schedulers: noop,deadline,sio,row,vr,fiops,cfq,bfq,zen
Write Protection removed
CPU Boost enabled
ToDo: Finish "Powersave" mode (disables 2 cores without any slow down)
My settings: 300MHz-1.2GHz Intelliactive, GPU Max 320 MHz, ROW, 4096 Readahead size
Download links in 2nd Post
XDA:DevDB Information
Modded Desire 510 Kernel, Kernel for the HTC Desire 510
Contributors
rbheromax, rbheromax, curbthepain, shinru2004 (I stole a few commits)
Source Code: https://github.com/rbheromax/kernel-htc
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-12-11
Created 2014-12-11
Last Updated 2014-12-11
Click to expand...
Click to collapse
Sent from my XT1028 using XDA Free mobile app
Removed
Sent from my XT1028 using XDA Free mobile app
kernel working great so far only issue is camera...no more sd issues...for xposed plugins could you recommend some good ones?
I don't use xposed. But when I used to, I only had Status bar scroll to top. Double tapping status bar, goes to the top of the page like iPhone
Sent from my XT1028 using XDA Free mobile app
Link = null... New one whenever your free to post another.
Do I understand correct that this kernel doesn't have overclocking?
rbheromax said:
I don't use xposed. But when I used to, I only had Status bar scroll to top. Double tapping status bar, goes to the top of the page like iPhone
Sent from my XT1028 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for this ..the apps were a nice touch ! Kernel is working great
I've managed to squeeze a lil bit more battery out of phone and decrease the heat output (my phone was heating up bad) by lowering the default clock of the GPU. doesn't decrease performance at all (that I notice). new build coming Monday
adambennett08330 said:
kernel working great so far only issue is camera...no more sd issues...for xposed plugins could you recommend some good ones?
Click to expand...
Click to collapse
Best Xposed modules you can have for this phone are xrenamer, sense 6 lockscreen mods, xsense and sense 6 toolbox. But in s6 toolox, you have to enable AOSP recent apps picker or you'll get constant android.media force closes.
Question:
Are there any certain necessary steps/precautions I have to take to flash this kernel using Flashify? My comp's broke so I gotta flash it that way
Edit:
Just flashed with Flashify, and my front facing camera still works!! So does my wifi, data, and as far as I can tell, everything else!!
But I don't have any of the embedded apps in my /System/app or data/app folders. Am I looking in the wrong /app folder possibly?
Are you sure it flashed correctly?
Screenshot Settings>About>Software info >More
Sent from my XT1028 using XDA Free mobile app
Nope just rebooted and it didn't flash. My bad.
I somehow lost my recovery by flashing with Flashify. Guess I gotta find a computer and re-flash twrp...
I think I flashed the kernel to recovery partition.
Edit:
Re-flashed my recovery, flashed the kernel with Flashify, and it worked this time, since I flashed as a boot img not recovery img this time.
FFC seems to be the only thing not working
OK, let me know if you have any other issues
Sent from my XT1028 using XDA Free mobile app
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Support for Governors---
Interactive
Performance
PowerSave
Userspace
Optimizations and Tweaks---
Disabled CRC-Check for upto 30% faster I/O.
Support for Dynamic-FSync (adjusts FSync according to usage resulting in a significant boost in the I/O performance).
Reduced RQ Lock-Contention for upto 0.7% increase in Performance.
Install
Copy the zip to your external or internal memory
Boot to twrp
Select the zip.
Reboot to system
Download-- Note 3 Neo (3g/4g)
XDA:DevDB Information
FireKernel for LP (5.1.x) ROMs (3g/4g), Kernel for the Samsung Galaxy Note 3 Neo
Contributors
FireLord, franciscofranco,Shoaib05
Source Code: https://github.com/FireLord1/android_kernel_samsung_smdk5260/commits/FireKernel-lp
Kernel Special Features: battery life
Version Information
Status: Beta
Created 2016-10-08
Last Updated 2016-10-08
ChangeLog
v1
Code:
FireLord1 - script: use google gcc 4.8
franciscofranco - Reduced RQ Lock-Contention for upto 0.7% increase in Performance
Shoaib0597 - Optimized task_sched_runtime for upto 20% increase in Performance
Shoaib0597 - Added support for CRC Toggle
Shoaib0597 - Reduced OverHead
Shoaib0597 - Enabled ARCH-Power feature
Joonsoo Kim - slub: fix a possible memory leak
franciscofranco - Remove '+' symbol from kernel version string
franciscofranco - drivers: mmc: according to the comment left by the original author disabling a cyclic redundancy check on data blocks by yield a a performance improvement hovering ~30%
Francisco Franco - backport https://lists.linuxfoundation.org/pipermail/ltsi-dev/2013-December/002683.html from Kernel 3.10 workqueue: use a higher bit to give more space to actual non-internal flags
franciscofranco - ksm: check and skip page, if it is already scanned
franciscofranco - sched: LOAD_FREQ (4*HZ+61) avoids loadavg Moire. From http://ripke.com/loadavg/moire
franciscofranco - Added fsync on/off support.
Greg Kroah-Hartman - Linux 3.4.40
FireLord1 - Linux: FK: r1
FireLord1 - script: zip: add building script and all
FireLord1 - defconfig: renamed to match script
Reserved
* This is my Kernel from osprey (moto g3). this may not have much features as compared to my first kernel release bcz that is for qcom and in exynos i cant do much BUT ill try to maintain main thing which is common. i.e battery life
* osprey: http://forum.xda-developers.com/2015-moto-g/orig-development/firekernel-v1-0-mm-6-0-x-roms-t3401538
* This is for single sim exynos galaxy note 3 neo.
* Compatible with all the custom roms.
* Can work for stock rom too but one thing will not work that is USB PC connection bcz i have edited the files for cm so..
* Its still using google GCC, will test uber GCC if that seems stable ill cook and give here.
* Well not much features but but.. ill upstream till 3.4.112 one Day!
* As always i dont own note 3 neo but i like to make stuff for it. Thanks to my testers 3g and 4g both.
It's very nice to see this Kernel coming from our osprey. It's the nice kernel for Osprey. Hope it's smooth & stable like osprey for exynos too
Huge kudos for you to work on 'Exynos' like SoC. Best of luck.
Thank you for your dedicated work brother. Appreciate it, and keep it up ?✌?
Thanks, waiting for N7502 custom ROM
Good job @FireLord
It doesn't save wifi when I reboot...I am on stock Why? :/ please help me cause I really need a costume kernel and I really appreciate your work! @FireLord
JimmygreecePanathinaikos said:
It doesn't save wifi when I reboot...I am on stock Why? :/ please help me cause I really need a costume kernel and I really appreciate your work! @FireLord
Click to expand...
Click to collapse
Wooah. Sorry to hear that.. Can you tell your device? I'm not sure if I can fix..
Sent from my MotoG3 using Tapatalk
FireLord said:
Wooah. Sorry to hear that.. Can you tell your device? I'm not sure if I can fix..
Click to expand...
Click to collapse
Samsung galaxy note 3 neo 4g version stock Android 5.1.1 Thanks for the fast reply I hope you will find something to fix this.. You always do!!
JimmygreecePanathinaikos said:
Samsung galaxy note 3 neo 4g version stock Android 5.1.1 Thanks for the fast reply I hope you will find something to fix this.. You always do!!
Click to expand...
Click to collapse
umm dunno how stock works.. try deleting /system/lib/module (whole module folder) it is not required cuz kernel has it inbuilt now.. please make backup before doing anything
FireKernel for SM-N7507 (hlltezt)
This is FireKernel with fixed Deadlock bug
Download: AFH
FireLord said:
umm dunno how stock works.. try deleting /system/lib/module (whole module folder) it is not required cuz kernel has it inbuilt now.. please make backup before doing anything
Click to expand...
Click to collapse
I always have backups... You don't say on the steps if we have to do a simple wipe/cache after installing the rom.. Could this be my problem for no savings wifi passwords after reboot??
JimmygreecePanathinaikos said:
I always have backups... You don't say on the steps if we have to do a simple wipe/cache after installing the rom.. Could this be my problem for no savings wifi passwords after reboot??
Click to expand...
Click to collapse
Yea try wiping after flashing kernel.. But hey? Why you keep on rebooting ?
Sent from my MotoG3 using Tapatalk
FireLord said:
Yea try wiping after flashing kernel.. But hey? Why you keep on rebooting ?
Click to expand...
Click to collapse
I installed a xposed module after your kernel so I had to soft reboot
JimmygreecePanathinaikos said:
I installed a xposed module after your kernel so I had to soft reboot
Click to expand...
Click to collapse
Oh.. Then try wiping cache
Sent from my MotoG3 using Tapatalk
Thx for your work. Will try the new kernel with stock rom in a few days.
Sent from my SM-N7505 using XDA-Developers mobile app
does this kernel fix camera issue or calling audio in cm-based roms ?
SAMSUNG Galaxy Note 3 neo
moss20 said:
does this kernel fix camera issue or calling audio in cm-based roms ?
SAMSUNG Galaxy Note 3 neo
Click to expand...
Click to collapse
Its just custom kernel.. Not bug fixing kernel please test it may fix
Sent from my MotoG3 using Tapatalk
biggoof75 said:
Thx for your work. Will try the new kernel with stock rom in a few days.
Click to expand...
Click to collapse
When you try please tell us if your wifi passwords are deleted after every reboot
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
Made yank battery profile as default for zzmoove
Added optimax governor
Added alucard governor
Increased rate of charging
Spectrum support
Vibrator intensity control.
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the latest zip from https://www.androidfilehost.com/?w=files&flid=197263
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
CHANGE IO SCHEDULER TO ZEN FOR BETTER BATTERY BACKUP.
ENABLE USB FASTCHARGE FROM KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in https://t.me/Srijith2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Update( 23/07/17):
No much changes in this one as I was little busy. Sorry!!!
Now u can actually control vibration intensity thorugh kernel tweaker
Added Governors:
Lionheart
Darkness
Dancedance
LZ4 Compression for faster booting.
Network speed enhanced.
Set governor to either zzmoove or nightmare and reduce maximum frequency around 1500 for better battery life.
If you feel phone is laggy increase the frequency!
Do report if you face any issue or if you need any new feature to be added.
V2.0
New build is up !!!
Link: https://www.androidfilehost.com/?fid=745425885120753737
Changelog:
UKM works perfectly (for synapse)*
Cleaned the zip file(fix for bootloop in aex and nr)
Added fpboost
Added FIOPS iosched
Added Alucard Hotplug*
*Governors can now be changed using synapse.
*Enable Alucard Hotplug for extreme battery saving. Device may slow down and lag. Increase max freq to keep it stable.
NOTE:
For better battery , set governor to zzmoove and max freq around 1.2k-1.5k and also keep 2 or 3 cpu's online .
For more feature request and issue report pm me!!
Will possibly change the bootsplash logo in next build .
Credits:
@ankurpandeyvns for helping with source
@Chaitanya @shubh84 for testing
@Anush12133 @Martichou
Source : https://gitlab.com/Srijith2001/StarCity_ham
Is it stable..??
It has yank battery extreme profile ??? it is good with zzmove governor.
himanshu fulmali said:
Is it stable..??
Click to expand...
Click to collapse
Yup
Safetynet isn't bypassing
Srijith Bharadwaj said:
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I decided to compile a kernel for this devices out of interest and also lack of development in kernel for it.
My aim is to make users happy by providing all the features possible.
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the zip from https://www.androidfilehost.com/?fid=961840155545580230
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in @SRIJITH2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Credits:
@ankurpandey for helping with source
@Chaitanya @sk284 for testing
Click to expand...
Click to collapse
was it a rom or something else am on nogat lineage os 14.1 and my fingerprint was not working actually there no option to unlock my phone with fingerprint any help with regarding that if it install this will it work
Bro whats your sot..??
sumanth26 said:
Safetynet isn't bypassing
Click to expand...
Click to collapse
Enable magisk hide root and try. If it doesnt then the feature is not present in the rom.
Depends on the rom also. Kernel supports safetyNet bypass but rom should have that feature to bypass.
himanshu fulmali said:
Bro whats your sot..??
Click to expand...
Click to collapse
6-7 hrs in RR
ashokram343 said:
was it a rom or something else am on nogat lineage os 14.1 and my fingerprint was not working actually there no option to unlock my phone with fingerprint any help with regarding that if it install this will it work
Click to expand...
Click to collapse
Its a kernel read op. Flash firmware and reflash the rom if have flashed nougat rom directly from lollipop.
Srijith Bharadwaj said:
Its a kernel read op. Flash firmware and reflash the rom if have flashed nougat rom directly from lollipop.
Click to expand...
Click to collapse
could you please give step by step information so that i wont make any mistakes please
ashokram343 said:
could you please give step by step information so that i wont make any mistakes please
Click to expand...
Click to collapse
Download nougat firmware.
Reboot to recovery
Wipe everything other than internal and otg
Flash nougat firmware and then flash the rom.
Fingerprint should work .
If not then fastboot cos and find if it works in it.
If it doesn't work in cos also then it's hardware issue.
Srijith Bharadwaj said:
Download nougat firmware.
Reboot to recovery
Wipe everything other than internal and otg
Flash nougat firmware and then flash the rom.
Fingerprint should work .
If not then fastboot cos and find if it works in it.
If it doesn't work in cos also then it's hardware issue.
Click to expand...
Click to collapse
hey thanks for the reply what is COS mean and one more thing i had installed mm nightlies fingerprint worked there
ashokram343 said:
hey thanks for the reply what is COS mean and one more thing i had installed mm nightlies fingerprint worked there
Click to expand...
Click to collapse
Cos is cyanogen os.
U wld have jumped directly from lollipop to nougat so u faced fingerprint issue. Now as u r back to marshmallow fingerprint is working. Now u can flash Nougat rom and u wll have fingerprint option.
Srijith Bharadwaj said:
Cos is cyanogen os.
U wld have jumped directly from lollipop to nougat so u faced fingerprint issue. Now as u r back to marshmallow fingerprint is working. Now u can flash Nougat rom and u wll have fingerprint option.
Click to expand...
Click to collapse
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
ashokram343 said:
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
Click to expand...
Click to collapse
Flash zui 2.5 and then flash any other N roms
ashokram343 said:
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
Click to expand...
Click to collapse
Bro flash ham nougat firmware and then flash N rom. Your fingerprint should work after this.
Synapse
Srijith Bharadwaj said:
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I decided to compile a kernel for this devices out of interest and also lack of development in kernel for it.
My aim is to make users happy by providing all the features possible.
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the zip from https://www.androidfilehost.com/?fid=961840155545580230
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in Srijith2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Credits:
@ankurpandeyvns for helping with source
@Chaitanya @sk284 for testing
Source : https://github.com/Srijith2001/StarCity
Click to expand...
Click to collapse
Users reported that synapse wasn't working so i checked it and fixed it. Now u can download the new zip from https://www.androidfilehost.com/?fid=961840155545580384 . Use the same procedure to flash.
Sorry for the inconvenience caused.
I flashed the kernel on nuclearom 7.1.2 as instructed in the op by clearing cache and dalvik but it ended in a boot loop.
I did something wrong?
raza_maestro said:
I flashed the kernel on nuclearom 7.1.2 as instructed in the op by clearing cache and dalvik but it ended in a boot loop.
I did something wrong?
Click to expand...
Click to collapse
Some other users too faced this problem. I will check to it bro. Will be fixed in next build.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WhitePugKernel by joe2k01Based on OpenKirin's source, you'll have same bugs as in RROS
How to install:
Download the flashable zip
Boot in TWRP
Flash zip
Reboot and you're done
Feautures:
Added blu active governor
Added alucard governor
Added darkness governor
Added bioshock governor
MSDOS fylesystem support
HFS filesystem support
HFS+ filesystem support
zen I/O scheduler
sio I/O scheduler
fiops I/O scheduler
tripndroid I/O scheduler
Option to disable fsync
Disabled detection of unclocked bootloader bt SafetyNet
Faster fingerprint wakeup
Nvidia power patches
Take care because I don't own the device, it has been tested anyway
Donate to IARC or SaveTheChildren
https://www.iarc.fr/en/about/donations.php
http://www.savethechildren.org
Downloads:
V1: Download
V2: Download
XDA:DevDB Information
WhitePugKernel for the Honor 8 Pro, Kernel for the Honor 8 Pro
Contributors
joe2k01
Source Code: https://github.com/joe2k01/WhitePugKernel-huawei_hi3660
Kernel Special Features:
Version Information
Status: Testing
Created 2017-07-08
Last Updated 2017-07-12
Fast work there man.
Sent from my Honor 8 using XDA Labs
Thanks for your work.
Im unable to flash the zip... It says unsupported device.
Got the DUK-L09C432 model
Cheers
smouker said:
Thanks for your work.
Im unable to flash the zip... It says unsupported device.
Got the DUK-L09C432 model
Cheers
Click to expand...
Click to collapse
Thank you for testing. Can you send me your build.prop and I'll fix? Probably I used wrong device name for secure flash.
---EDIT---
Sorry I just realised I linked Honor 8 kernel instead of 8 Pro, going to fix op
OP is fixed, now you shouldn't have any problem @smouker
joe2k01 said:
OP is fixed, now you shouldn't have any problem @smouker
Click to expand...
Click to collapse
Thank you for your work.
I was able to flash the kernel.
Cheers
smouker said:
Thank you for your work.
I was able to flash the kernel.
Cheers
Click to expand...
Click to collapse
Well, report back your experience please :highfive:
joe2k01 said:
Well, report back your experience please :highfive:
Click to expand...
Click to collapse
Fingerprint sensor is faster! Currtently im using I/O-Scheduler Zen an 1024 Readahead.
I underclocked both CPU groups and so far the Phone is still stable
Thank you for your work!
New build released:
Bioshock governor
Tripndroid scheduler
Nvidia power patches
Fixing credits in repo, will fix OP later
Support for both Stock and Custom or just Custom??
FixerZ said:
Support for both Stock and Custom or just Custom??
Click to expand...
Click to collapse
Both.
FixerZ said:
Support for both Stock and Custom or just Custom??
Click to expand...
Click to collapse
On stock you'll have bugs like no SD card and buggy camera
can you make dt2w in this kernel?
Ruppi64 said:
can you make dt2w in this kernel?
Click to expand...
Click to collapse
It is already in kernel, I just need a proper way to activate it
joe2k01 said:
It is already in kernel, I just need a proper way to activate it
Click to expand...
Click to collapse
That would be good, then synonymous times the lockscreen a sense:good:
Ruppi64 said:
That would be good, then synonymous times the lockscreen a sense:good:
Click to expand...
Click to collapse
Yeah but I have to investigate a bit
Hi, I just made a tg group for my kernels users. Here is link http://t.me/WhitePugKernels
joe2k01 said:
It is already in kernel, I just need a proper way to activate it
Click to expand...
Click to collapse
I have tried dt2w times after this guidance https://forum.xda-developers.com/mate-9/how-to/enable-double-tap-to-wake-mate-9-t3580764
But unfortunately I have only the option under motion control dt2w and dt2s with firmware DUK-L09C432B130
Otherwise no function
Ruppi64 said:
I have tried dt2w times after this guidance https://forum.xda-developers.com/mate-9/how-to/enable-double-tap-to-wake-mate-9-t3580764
But unfortunately I have only the option under motion control dt2w and dt2s with firmware DUK-L09C432B130
Otherwise no function
Click to expand...
Click to collapse
That guide is for EMUI only. Anyway I may be wrong