Related
I have a Samsung Galaxy Ace GT-S5830, with the following info:
- Android Version: 2.2.1
- Baseband Version: S5830JXKC1
- Kernel Version: 2.6.32.9-perf
- Build Number: Froyo.JPKC2
- Connected to a Laptop running Windows 7 Enterprise fully updated with hotfixes, updates and drivers.
I’m tying to Install the new gingerbread 2.3.4 update from samfirmware, but every time I run Odin and try to update, the process stops at: <1> setup connection...
I tried to:
- Use a different laptop.
- Use a different cable.
- Use a newer version of Odin (old was 4.38, new is 4.42).
- Kill the Kies processes in my laptop using task manager.
- Update Kies to the latest version.
- Uninstall Kies and it's related files.
- Update my laptop motherboard and USB drivers.
- Reinstall the Samsung Mobile Phone USB drivers.
- Select different settings in Odin (Debugging mode / PDA mode... etc).
none of the above worked
help?
If you did this question may sound stupid but I should ask anyway...
Did you boot to download mode?
How to put into download mode
1. On an OFF state, press VolumeDown+HomeButon+Powerbutton (hold them together until you see the download mode screen (small yellowish/gold/orange color)
Hope we were able to help you.
It worked
Okay, your question was not stupid, I do feel stupid however :/ apparently I was doing this:
- Holding Down Volume Up + Volume Down + Home Button + Power Button!
It loads a screen that says "Emergency Download Mode", which I assumed was the correct loading screen since it does show on Odin...
I was wrong; I should have just done this:
- Holding down Volume Down + Home Button + Power Button!
In which it does load the correct download screen with the yellowish message that say "Downloading…"
Thanks a million guys, this one gave me a heart attack yesterday
I have problem upgrading my Ace too,
I have a yellow text showing downloading and I always got stuck :
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 32
can someone advise?
Thanks
Something is messed up with your PC's USB drivers. Get an updated set of your Chipset drivers for your motherboard, uninstall and reinstall Kies, or switch to a different PC.
ronlkh said:
I have problem upgrading my Ace too,
I have a yellow text showing downloading and I always got stuck :
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 32
can someone advise?
Thanks
Click to expand...
Click to collapse
Hey!
Just wanted to ask, dose you in "DOWNLOAD" mode?
CHEERS!
casiocas said:
Hey!
Just wanted to ask, dose you in "DOWNLOAD" mode?
CHEERS!
Click to expand...
Click to collapse
There's startthread detected. It means he was in the download mode before it messes up.
consegregate said:
There's startthread detected. It means he was in the download mode before it messes up.
Click to expand...
Click to collapse
Hey!
Jeah, he has problem with USB(drivers or change to other USB).
CHEERS!
Thanks to everyone who gives their advice.
Finally the problem is from the PC, probably some USB device clash with odin. After using another PC, I am able to flash my ace now.
Thanks again.
Noorish said:
Thanks a million guys, this one gave me a heart attack yesterday
Click to expand...
Click to collapse
He heartattack no good and unnecassary use 'JIG' to recover allways..
http://www.youtube.com/watch?v=Rdn5GoRjhn0
Noorish said:
Okay, your question was not stupid, I do feel stupid however :/ apparently I was doing this:
- Holding Down Volume Up + Volume Down + Home Button + Power Button!
It loads a screen that says "Emergency Download Mode", which I assumed was the correct loading screen since it does show on Odin...
I was wrong; I should have just done this:
- Holding down Volume Down + Home Button + Power Button!
In which it does load the correct download screen with the yellowish message that say "Downloading…"
Thanks a million guys, this one gave me a heart attack yesterday
Click to expand...
Click to collapse
I'm having the same problem. I'm trying to unbrick my Ace phone. The problem is that nothing comes up on the screen and I can only access EMERGENCY DOWNLOAD MODE (pushing all the buttons). I can NOT enter normal DOWNLOAD MODE the phone just doesn't enter this mode and Odin does not recognize it. Should ODIN work also on EMERGENCY DOWNLOAD MODE? or just DOWNLOAD MODE? if so, how can I get to DOWNLOAD MODE?? HELP PLZ!!!!
pliundemix said:
I'm having the same problem. I'm trying to unbrick my Ace phone. The problem is that nothing comes up on the screen and I can only access EMERGENCY DOWNLOAD MODE (pushing all the buttons). I can NOT enter normal DOWNLOAD MODE the phone just doesn't enter this mode and Odin does not recognize it. Should ODIN work also on EMERGENCY DOWNLOAD MODE? or just DOWNLOAD MODE? if so, how can I get to DOWNLOAD MODE?? HELP PLZ!!!!
Click to expand...
Click to collapse
Use a USB Jig
Sent from my GT-S5830 using XDA App
this is Siddhartha,i am using Samsung galaxy ace & i
have rooted my phone then by using titanium back up i had deleted some
app;s in my phone then i tried to back up by ROM MANAGER finally i got
bricked my phone ....... plz help me out from this problem
i had tried to unbrick by odin multi down loader by stock ROM
Odin 4.38 detect phone ok but always get this error:-
Download Start...
<0> Create File...
<1> StartThread Detected : 0
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 1
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> : 0
<4> setup connection...
why u used rom manager dude.........................................................................
send to ur service center....................................................................................
http://forum.xda-developers.com/archive/index.php/t-1342569.html
i have the same problem
FinnAndJake said:
why u used rom manager dude.........................................................................
send to ur service center....................................................................................
http://forum.xda-developers.com/archive/index.php/t-1342569.html
Click to expand...
Click to collapse
odin recognizes my phone but only in emergency download mode not the download mode and im stuck at step 1 setting up conn. what is emergency download for if not to unbrick your phone wtf and my 1click unsoft brick keeps failing too if anyone knows how to do it videos are useless if it just shows success not failures and what to do
I got the same problem it stucks to setup connection. The strange is when i try entering download mode it doesnt go with the yellow Downloading stuff. It apears a square on top in it saying Emergency Dload Mode (ARM9 mode) and lower from the square the samsung logo. I have a samsung galaxy mini GT-S5570. Anny help?
sica0 said:
I got the same problem it stucks to setup connection. The strange is when i try entering download mode it doesnt go with the yellow Downloading stuff. It apears a square on top in it saying Emergency Dload Mode (ARM9 mode) and lower from the square the samsung logo. I have a samsung galaxy mini GT-S5570. Anny help?
Click to expand...
Click to collapse
Look at this video
http://www.youtube.com/watch?v=LqaijoQGE_I
I know what your problem is your friend try to move your usb plugs into the other ...
:highfive:
ronlkh said:
I have problem upgrading my Ace too,
I have a yellow text showing downloading and I always got stuck :
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 32
can someone advise?
Thanks
Click to expand...
Click to collapse
Hope u guys know the correct name of the ops file of the respective phone. Nearly half of the issues have been solved just by renaming the ops file.
But there are some more critical cases too:sly:
Heya Guys,
So I had been playing with my Galaxy Ace recently, and I managed to Soft brick it.
But unfortunately I cannot seem to recover it.
What happened:
I had rooted my OFW and decided to try Cyanogenmod 7.2. All was going well.
Then I read about this firmware; http://michielv.eu/2012/10/12/boost-your-samsung-galaxy-ace-s5830i/
M!-U! Rom, so I looked it up on XDA and found 2.2.1patched, and flash that.
On reboot I got a black screen. No boot. OH ****!
I did find if I do the battery trick I can get into download mode. Screen still black.
The problems is I cannot flash ANYTHING using Odin. (tried 1.85 & 4.38 on 2x Win7 machines & 1x XP machine)
Odin recognizes the phone in download mode (Yellow square) but when I try to flash, it gets stuck on
"<>1 Setup Connection"
Tried updating the Samsung drivers and using different ports, nothing is working.
Tried a USB Dongle, no luck.
I do have a full CWM backup on the SD, but I cannot get into recovery mode.
If anyone has any ideas on how to get Odin working (I'm on a Win7 machine) I'd really appreciate it..
Thanks,
Brik
Maybe Odin is outdated. Also did you check the one package option in Odin while flashing? Also, try using a different USB cable. Try this website- androidadvices.com....go to the galaxy ace section and follow the steps EXACTLY.
If everything fails, go to a service centre and say that your device got bricked while updating from kies.... You need to appear very angry and absolutely convinced that it's not your fault. Then they'll probably repair it.
Best if luck.
Swyped from My Galaxy Ace.
A thanks would be appreciated.
Kabir Saxena said:
Maybe Odin is outdated. Also did you check the one package option in Odin while flashing? Also, try using a different USB cable. Try this website- androidadvices.com....go to the galaxy ace section and follow the steps EXACTLY.
If everything fails, go to a service centre and say that your device got bricked while updating from kies.... You need to appear very angry and absolutely convinced that it's not your fault. Then they'll probably repair it.
Best if luck.
Swyped from My Galaxy Ace.
A thanks would be appreciated.
Click to expand...
Click to collapse
Thanks for the reply! I've used Odin v4.38 & v4.42 (those recommended for S5830) and even tried 1.85 and 3.07.
None work. Tried a different cable and that didn't work either.
Can you provide an direct link to androiddevices.com? No sure what "Steps" I should look at..
If I have no luck by Monday, I'll take it back..
Thanks!
BrikHaus said:
Thanks for the reply! I've used Odin v4.38 & v4.42 (those recommended for S5830) and even tried 1.85 and 3.07.
None work. Tried a different cable and that didn't work either.
Can you provide an direct link to androiddevices.com? No sure what "Steps" I should look at..
If I have no luck by Monday, I'll take it back..
Thanks!
Click to expand...
Click to collapse
Here is a link to the mobile website- http://androidadvices.com/update-galaxy-ace-s5830-official-gingerbread-236-xwktm-firmware/
Tty this. And download the files from this website itself. The site is trustworthy.
Kabir Saxena said:
Here is a link to the mobile website- http://androidadvices.com/update-galaxy-ace-s5830-official-gingerbread-236-xwktm-firmware/
Tty this. And download the files from this website itself. The site is trustworthy.
Click to expand...
Click to collapse
This is exactly what I've been doing; But Odin gets stuck and wont let me flash;
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
BrikHaus said:
This is exactly what I've been doing; But Odin gets stuck and wont let me flash;
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
Click to expand...
Click to collapse
Well, do you have any firewalls on your computer? If yes, disable them. They sometimes interfere with Odin.
Kabir Saxena said:
Well, do you have any firewalls on your computer? If yes, disable them. They sometimes interfere with Odin.
Click to expand...
Click to collapse
Tried that but still no luck.
It seems I can get into "Emergency Recovery Mode" (Up+Down+Home+Power) Only. Cannot get download mode,,
Odin still recognises the phone (yellow square) but will not flash...
Ok, since I couldn't get it into download mode I returned the phone to place of purchase and got a replacement.
Problem solved.
BrikHaus said:
Ok, since I couldn't get it into download mode I returned the phone to place of purchase and got a replacement.
Problem solved.
Click to expand...
Click to collapse
Good to hear.
Many are not as lucky as you.
Hi i have made a very bad mistake and have installed CWM intended for the 5830i on my 5830 the phone turned off straight away.
Now it will not boot looks dead.
I can get into download mode odin detects it but i cannot see anything on my screen. Then when i start odin i get to:
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
That's it, just hangs there.
Is my 5830 hardbricked?
Is there a way around it?
Would a jig be of any benefit?
[email protected]
Do you have the required drivers?
Wrong recoveries usually hard brick the phone but you might be lucky
le random signature o.o
Yes i have all the drivers. I hope im lucky stressed to max now.
[email protected] said:
Yes i have all the drivers. I hope im lucky stressed to max now.
Click to expand...
Click to collapse
If you press the download mode buttons
Does it say downloading ?
If not it can be that you have killed your ace aka hardbricked
Sent from my ST25i using xda app-developers app
No nothing just blank screen. So it was probably Emergency Download Mode? Hardbricked? I will try a few phone shops by me see if they got a riff box.
[email protected] said:
Hi i have made a very bad mistake and have installed CWM intended for the 5830i on my 5830 the phone turned off straight away.
Now it will not boot looks dead.
I can get into download mode odin detects it but i cannot see anything on my screen. Then when i start odin i get to:
StartThread Detected : 0
StartThread Detected : 0
StartThread Detected : 0
StartThread Detected : 0
setup connection...
That's it, just hangs there.
Is my 5830 hardbricked?
Is there a way around it?
Would a jig be of any benefit?
[email protected]
Click to expand...
Click to collapse
Try this Odin & cooper:-
http://db.tt/jgXJcjzG
Do press thnks!!
Sent Via XDA™ Premium
Galaxy_Rohit said:
Try this Odin & cooper:-
http://db.tt/jgXJcjzG
Do press thnks!!
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Thanks for the input but still the same stuck on:
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
I am using S5830BUKS2_S5830VODKS1_S5830XWKS2_HOME.tar.md5 one package file. That is the stock that it was on originally.
I have been looking for a multipackage to try anybody got a link?
Also i uninstalled kies and re installed now i have "SAMSUNG CDMA Technologies" in device manager without drivers and i cannot for the life of me get drivers to install.
CDMA? that's USA aint it? I'm UK GSM?
If the download mode doesn't come up with the words downloading, written, then your device is hard bricked and you have to take your phone to a service center
le random signature o.o
Prawesome said:
If the download mode doesn't come up with the words downloading, written, then your device is hard bricked and you have to take your phone to a service center
le random signature o.o
Click to expand...
Click to collapse
No warrenty left on the brick.
Riff Box will do it so i will go to phone shop thanks for your help.
[email protected] said:
No warrenty left on the brick.
Riff Box will do it so i will go to phone shop thanks for your help.
Click to expand...
Click to collapse
Hey it had happened to me too
do this
Reinstall smasung drivers and then try flash via Odin it will surely work ...
And in that joy don't forget to come back and hit thanks lol
__________________________________________
"lts not who u r inside, its wat u do that defines u..."
———–——————————————
--->make ur phone faster and more battery efficient
--->partition and link apps to sd?!?!?
--->cool 3d games for galaxy y (no root no lag)
sanny5 you saying you flashed cwm meant for a 5830i on a 5830? And you unbricked it like that?
[email protected] said:
No warrenty left on the brick.
Riff Box will do it so i will go to phone shop thanks for your help.
Click to expand...
Click to collapse
Well, if Odin doesn't work and the download mode doesn't come up, then its a certain hard brick. Nothing you can do except service center or jtag
P.S. for God's sake, stop begging for thanks people
le random signature o.o
THANKS
Galaxy_Rohit said:
Try this Odin & cooper:-
Do press thnks!!
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Thanks!! I had the freakin' same problem (caused by a power voltage problem while flashing) and thanks to you, my Ace's back!!!
Did you have Download on screen?
arc4d14n said:
Thanks!! I had the freakin' same problem (caused by a power voltage problem while flashing) and thanks to you, my Ace's back!!!
Click to expand...
Click to collapse
You're always welcome...
Sent Via XDA™ Premium
[email protected] said:
Did you have Download on screen?
Click to expand...
Click to collapse
Yes, It was pretty much the only thing that my display shown....
Me too need
@gelexy Rohit Please give me this OPS & odin .. my S5830 also bricked
i tried to download from Google Drop box bot error 404 file not found there .
please give me new link
Br
Tarun
[email protected] said:
Hi i have made a very bad mistake and have installed CWM intended for the 5830i on my 5830 the phone turned off straight away.
Now it will not boot looks dead.
I can get into download mode odin detects it but i cannot see anything on my screen. Then when i start odin i get to:
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
That's it, just hangs there.
Is my 5830 hardbricked?
Is there a way around it?
Would a jig be of any benefit?
[email protected]
Click to expand...
Click to collapse
Hi There,
Try reinstaaling the Drivers or updating then or swap the Odin version if no sucess. Then Try Usb Jigg
I've added a few apps to my S3 and altered a few things on my PC and now I can't connect via mtp or ptp. It goes through the usual "installing drivers" and then fails. I've tried pulling the battery and removing the sim and micro sd card then putting everything back. Tried it without the card (currently having to transfer files via a card reader so - at least the card's fine) but to no avail.
I've had a go at uninstalling the drivers through the device manager, rebooting and scanning for hardware changes. I've tried downloading the drivers without kies but it didnt work out (I cant remember the site or the url, but ended up with the following file SAMSUNG_USB_Driver_for_Mobile_Phones) It didn't auto install but even when I tried to point Windows to the folder on my C drive, nothing.
I've spent a couple of hours trawling the net including on here and tried all sorts.
I'm rooted, using the stock 4.1.2 ROM with Windows 7.
I can't use Kies as when it was installed the first time it wrecked all my Synctoy sync's so I really could do with another option please guys.
Dial *#7284# on your phone to access PhoneUtil and select 'Qualcomm USB Settings' at the bottom.
Now select 'MTP + ADB' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit PhoneUtil. Your phone is now back to default USB operation.
Raistlin1158 said:
Dial *#7284# on your phone to access PhoneUtil and select 'Qualcomm USB Settings' at the bottom.
Now select 'MTP + ADB' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit PhoneUtil. Your phone is now back to default USB operation.
Click to expand...
Click to collapse
Thanks for the quick reply.I did that and it was set to mtp + adb...
When I then connected it it tried installing the driver and I got..
Driver device software was not installed.
Please consult with your device manufacturer for assistance getting this device installed
MTP USB Device X Failed
I tried updating the MTP drivers again from device manager but this time got
Windows encountered a problem installing the driver software for your device
Windows found driver software for your device but encountered an error while attempting to install it.
SAMSUNG Mobile MPT Device
This device cannot start (code 10)
From what I'm reading it's a computer error not the phone. Can anyone suggest a new set of drivers to download (that doesnt involve Kies) as I've had issues with picking up harmful software from random sites when I've been struggling to find drivers.
I tried using the suggestion at the bottom of here r.e.Portable Devices and deleting the Upperfilters string Link but also to no avail.
Oh, and yes I've tried different ports and cables.
Well that's me done for the evening! I've tried everything mentioned in this thread including updating java and windows media player and all the afformentioned stuff but still no dice.
Could it be the actual drivers or a random windows 7 setting that I haven't yet tweaked since my clean install of windows??
http://d-h.st/YpV
Here are the correct drivers, install then reboot your pc.
Raistlin1158 said:
Go here for drivers.
---------- Post added at 01:00 AM ---------- Previous post was at 12:57 AM ----------
http://d-h.st/YpV
Here sre the correct drivers, install then reboot your pc.
Click to expand...
Click to collapse
Sorry,I know I'm tired but I can't see a link on your post...
Highlighted in red
The newer drivers don't really wwork with the 9305 so find some older drivers. That works for me
Sent from my GT-I9305 using xda app-developers app
Thanks for the tip.any suggestions as to where I can download these older drivers? I'll try the previously mentioned ones first, but I'm starting to think it might be the drivers themselves
woldranger said:
Thanks for the tip.any suggestions as to where I can download these older drivers? I'll try the previously mentioned ones first, but I'm starting to think it might be the drivers themselves
Click to expand...
Click to collapse
The ones I posted work fine on my 9305 so you shouldn't have any issues and as you can see from the site they are nearly a year old.
Try them what have you got to loose, if they don't work you are no worse off
Raistlin1158 said:
The ones I posted work fine on my 9305 so you shouldn't have any issues and as you can see from the site they are nearly a year old.
Try them what have you got to loose, if they don't work you are no worse off
Click to expand...
Click to collapse
Cheers, yeah, I was going to try them but I wasn't at my pc at the time I wrote that. I've downloaded the exe package but now it seems there are still drivers to uninstall - I uninstalled the drivers through device manager and went into my C drive and removed the SAMSUNG folder with the USB drivers in it. I'll restart the pc and hope that helps with the removal....
woldranger said:
I've added a few apps to my S3 and altered a few things on my PC and now I can't connect via mtp or ptp. It goes through the usual "installing drivers" and then fails. I've tried pulling the battery and removing the sim and micro sd card then putting everything back. Tried it without the card (currently having to transfer files via a card reader so - at least the card's fine) but to no avail.
I've had a go at uninstalling the drivers through the device manager, rebooting and scanning for hardware changes. I've tried downloading the drivers without kies but it didnt work out (I cant remember the site or the url, but ended up with the following file SAMSUNG_USB_Driver_for_Mobile_Phones) It didn't auto install but even when I tried to point Windows to the folder on my C drive, nothing.
I've spent a couple of hours trawling the net including on here and tried all sorts.
I'm rooted, using the stock 4.1.2 ROM with Windows 7.
I can't use Kies as when it was installed the first time it wrecked all my Synctoy sync's so I really could do with another option please guys.
Click to expand...
Click to collapse
Having the same problem. but I am on 4.3 rom using carbon rom a few days then transferred to pac man rom. My cellphone is not detected in my computer but it is being detected in the safely remove usb options. I tried to use a usb otg cable and a flash disk. No notification is seen on my phone but I can access the files on the flash disk (using usb otg cable) in the file manager. Tried the *#7284# but error occurs and says connection problem or invalid MMI code. I found that MTP udb device says failed
Raistlin1158 said:
The ones I posted work fine on my 9305 so you shouldn't have any issues and as you can see from the site they are nearly a year old.
Try them what have you got to loose, if they don't work you are no worse off
Click to expand...
Click to collapse
It made no difference whatsoever. I used a utility to check for an remove the samsung drivers (USBDeview) as well as uninstalling through device manager and removing with windows "products and features" but even then, when I tried installing the new drivers it mentioned previous drivers. I restarted after each stage of the process.
I've even tried connecting it in download mode and it shows in device manager.
Could there be some remnant of the software I used to root that phone that might be causing the issue??
I'm due to leave the country in 5 days and have loads of things to sort (also have a family member going into hospital for major surgery tomorrow) so I can't just devote all my time to this - but I need to at least know that it's not the phone (I dont have another win 7 computer to try it on).
woldranger said:
It made no difference whatsoever. I used a utility to check for an remove the samsung drivers (USBDeview) as well as uninstalling through device manager and removing with windows "products and features" but even then, when I tried installing the new drivers it mentioned previous drivers. I restarted after each stage of the process.
I've even tried connecting it in download mode and it shows in device manager.
Could there be some remnant of the software I used to root that phone that might be causing the issue??
I'm due to leave the country in 5 days and have loads of things to sort (also have a family member going into hospital for major surgery tomorrow) so I can't just devote all my time to this - but I need to at least know that it's not the phone (I dont have another win 7 computer to try it on).
Click to expand...
Click to collapse
Just got the same problem. But my problem is already solved. Just flash a new rom. In my instance, I flash ripper rom
Heya everybody ! So I got me a Galaxy gear yesterday and I was eager to get home and root it and put a custom rom on it, since I need it for some apps + I got a Htc m7. So I get home, connect it to my macbook, (noticed that the usb debugging was already switched on) and ran adb. I'm no stranger to adb and fastboot but far from a pro (I just read tons of instructions and learn simple commands) So After running ./adb devices I just get the List of devices : and an empty list.
I've tried it on another mac, same thing. On 2 different PC's with win 7 and 8, same thing.
On the macs I've deleted any apps that might have anything to do with such drivers like Android file transfer.
Updated the adb_usb.ini vendors.
on the pc's Ive uninstalled and installed over and over all the drivers and still get the same problem.
+ I've tried all types of adb's, downloading the sdk over and over again with no result.
I even tried restoring the device a couple of times and even reinstalled the stock rom with Odin.
I've done pretty much everything I can find on the net on how to fix this issue.
Can you guys please help me with some Ideas ?
P.S
in adb I've tried the ./adb kill-server about a 100 times, so have I restarted each pc/mac 100 times and changed between every usable usb port.
One this I notice that on my mac when I go to the "device manager"/"system report", Under USB it says TIZEN with this info :
Product ID: 0x6860
Vendor ID: 0x04e8 (Samsung Electronics Co., Ltd.)
Version: 4.00
Serial Number: 441f900f41018dc9
Speed: Up to 480 Mb/sec
Manufacturer: Samsung
Location ID: 0x1d110000 / 8
Current Available (mA): 500
Current Required (mA): 96
Oh the gear :
Model : SM-V700
Software version : V700XXuCNF1
I would appreciate any ideas and comments ! Thank you guys !!!
Add :
Oh and also Cydia Impactor can't find the device.(forgot to mention it)
Add 2 :
Oh and on the PC I installed and uninstalled Kies a couple of times.
Your gear isn't using android sdk. It's using Tizen. Download this sdk.
https://developer.tizen.org/downloads/tizen-sdk
440bro said:
Your gear isn't using android sdk. It's using Tizen. Download this sdk.
https://developer.tizen.org/downloads/tizen-sdk
Click to expand...
Click to collapse
Didn't see that one coming thank you.
P.s
I just installed it, and I'm kinda lost. Cant find anything in it which I know how to use ? Any pointers on what to do after installing this SDK ?
Edit:
I tried using the sdb as adb and still I get an empty list.
Did install it on both my mac and pc. and it's like nothings changed.
EDIT LAST :
Ok so I ran this : http://forum.xda-developers.com/showthread.php?t=2770183&page=13
from Odin to my device, and now my SDB finds my device. but I still cannot install apk files and not sure should i flash a recovery now and actually pretty confused on whats going on.
https://developer.tizen.org/documentation/articles/smart-development-bridge
440bro said:
https://developer.tizen.org/documentation/articles/smart-development-bridge
Click to expand...
Click to collapse
Thank you so much, finally got the hang of it after bricking it a couple of times
I was doing everything backwards and chaotic but now I understand whats what
got it to work and started flashing everything I need, THANK YOU SO MUCH !