Its an accessories related question and i hope its ok to ask here. I just received my Nexus 7 32GB and loving it! As what i would do usually, I immediately started looking for back cases / covers / pouches for this lovely device and then I tought, does it really need one? The material at the back doesnt look like the one that could easily be scratched. But then I see so many cases around and people using them. Maybe to better protect the device when/if it falls? I dont like folio cases anyway and only buying a back case looks like a waste.
Any suggestions?
Sent from my GT-N7100 using xda premium
It can get scratched. I have mine in a case almost all the time and I found a scratch on mine somehow
While it's not essential, I'd still go with a case, because you just never know what may befall your new shiny tablet. Since a lot of cases on the market appear to be cheap and ugly, buy something that is well built and from quality materials. This may set you back $50 or more, but trust me, it's well worth it. The tablet will just feel better in your hand, more secure, and you won't have to worry about the screen being scratched or it getting dinged on the side.
Ever since I got my Norever leather case I like the way my N7 feels way more than it does without it.
If you're only interested in a "back case" then I would consider the Incipio Feather. Here's my review. The Feather did come with a screen protector, but I'm with the others in this thread and I would just go with a full case to protect the whole thing.
FULL DISCLOSURE: The Feather was provided to me by Incipio for the purpose of review. I do not receive any compensation for my reviews.
Protection required
I would have to agree that i enjoy having my nexus out of a case . I like the feel of the back and for me it would not get scratched as im careful.. But I use it while im out and about all the time.. I have almost dropped it a few times.I think if you drop this device and it hits the edge of bezel The screen will crack.So i recommend having a nice case . For me i have the bobjgear silicone case . It does add bulk and the nice look of the device . But it provices alot of protection.
Happy Nexus Owner
Erica Renee
I am thinking of a simple plain matte black slim tpu case. Let's see if I can find one.
Sent from my Nexus 7 using xda premium
Well, having dropped my N7 twice, I can attest to getting a case for the Nexus lol. Both drops were from at least 3 feet and the first one went down rolling to the sidewalk from my truck in my Treegloo case. The N7 came unscathed but the Treegloo had an indentation that could barely notice. The second fall was in the garage cement floor. This time the fall was straight down back side down and went SPLAT. I freaked!:silly: and immediately took it out and found it turned on fine and the glass was uncracked. So I went inside and put the N7 down but noticed the cover didn't sit flush like it normally did, so I took the N7 out of the case and saw the backing corners were coming undone and I had to press down to re-snap them back into the corners again.
Now the treelgoo has been semi-retired now that I have the Seidio Active case on. It works because I now also use the Kropsson Aero modded universal car mount and using the treegloo wouldn't work in that case.
Simply... Yes
as in the title yes, I have had a couple of small falls and one or two larger ones, and having the stock official ASUS ones may have saved it a lot of times, so getting any that will have some bump protection is a definite go ahead
call it insurance
I like the naked feel of the N7 in my hand. It's just right. The options available are all over the map. Those folding contraptions remind me of the old paper maps that I could never get right. The armored ones look like two handers and you are going to drop test it because it's a job just to handle all that bulk. I'm going with a leather YooMee pouch [correction: they call it a sleeve] for transport purposes and working the N7 raw.
Noticed Otterbox just announced the Defender series for the N7.
I like Otterbox but $70 is too expensive for a plastic case. Hell, you get a hand made leather Noreve case for $72.
xips said:
I like the naked feel of the N7 in my hand. It's just right. The options available are all over the map. Those folding contraptions remind me of the old paper maps that I could never get right. The armored ones look like two handers and you are going to drop test it because it's a job just to handle all that bulk. I'm going with a leather YooMee pouch for transport purposes and working the N7 raw.
Noticed Otterbox just announced the Defender series for the N7.
Click to expand...
Click to collapse
I think this would be good. I am not too worried about dropping it but more want to protect it from scratches. A nice leather pouch is what I need. Thanks! Off to eBay
Sent from my Nexus 7 using xda premium
I only use a case outside of my house, otherwise for reading and such I go caseless. I have carpet everywhere and even with a couple drops it's not damaged. It's pretty solid.
ynrozturk said:
I like Otterbox but $70 is too expensive for a plastic case. Hell, you get a hand made leather Noreve case for $72.
Click to expand...
Click to collapse
You're right about that. I figure once things settle down they'll run in the $50 neighborhood. Still, as much as I love Otterbox, I'm afraid it will add too much bulk and that's entirely too much for a stand.
I've had all sorts of adventures with my nexus 7, and to be honest back plate is as good as new, the silver border however is a different story.
I went with a Cruzerlite TPU case $19 doesn't add any bulk really comes in all colors with cool design on the back (they are the androids)
Related
Just got my phone back from getting the screen replaced and need to find something to put it in to keep it safe! Any Suggestions?
Original HTC Desire HD Leather Case
Hi there,
when I got my NS i went to the nearby Electronics Shop and tried the cases they had. The Original HTC Desire HD leather Case fits very well...
do you have the i9020 or i9023? Any type of case you have in mind?
Sent from my Nexus S using XDA App
I really like the cases from this thread. Picked up two of them.
http://forum.xda-developers.com/showthread.php?t=1222925
Sent from my Nexus S using xda premium
The Incipio Feather Case is nice. It doesnt add much bulk, but still protects well.
Why not get a good screen protector and then run without a case. When the battery door gets to the point that its no longer attractive or you want to sell the phone buy a new battery door cover. A new battery door will cost you $7-$12 on eBay.
My Nexus has survived wars and it still looks good w/o a case. Like ^ this guy said, screen protector would suffice. I hate that extra bulk in my pocket.
I've got the trident aegis black-on-black for my NS4G (which I've had since last august) and think it's great. I had never been a "case" guy, and always kept my phones bare, but this phone was just waaaaaay too slippery. The smooth plastic back is one of the worst features of this phone and makes it really hard to hold on to if you're constantly juggling stuff in your hands and on the move. I dropped it a bunch of times in the first few days I had it before I just caved and ordered this case.
It's a two-piece case with a silicone full body case that covers the whole phone, and then a hard plastic outer shell that kind of clamps around the silicone.
The silicone part is supposed to absorb shock when you drop it, I guess. It has tabs that cover the headphone and usb ports, cutouts that are perfect for the camera and speaker, and mic, and is a bit thicker on the corners, which gives me some confidence and makes me think that they thought the design through well. I've dropped it a bunch, and watched my 1.5yr old son throw it to the ground, and no probs.
The plastic part wraps around that and is supposed to be good at reducing risk of damage during "crushing" impact. All I can say is that I actually shut my car's trunk on this phone accidentally and it was absolutely fine. It gives it gives it a sleeker feel and minimizes the "ruberry-ness", too.
It also comes with a clear screen protector that is fine, and I don't even notice. Since the screen is curved most people complain about the fact that screen protectors don't stick well on the edges, which is true, but the lip of the silicone case on the front covers this area, so you don't even notice it. I also don't notice a difference when using the touchscreen.
The silicone part does collect lint, so if you're OCD about that, it'll be annoying, but the protection makes it totally worth it for me. I'll gladly pay $30 for a rock solid case that collects a little lint rather than get insurance at $7.99 x 24 months = $192 over the contract. The one thing that's important to know if you use multiple batteries like I do, is that you have to put the silicon section into the hard plastic section first, pop all the buttons out of their holes on the hard plastic case, and then push the phone into the case. If you try to put the rubber part on the phone first, and then put the hard plastic on, the fit is so tight, it's tough to get the buttons to pop out. It was pretty frustrating before I figured this out, but now it only takes me a few seconds to do a battery swap. Finally, the case does add some bulk to the phone, but I personally don't think it's all that bad. The phone feels more solid in my hand and is much less slippery.
I've been meaning to write a review for this phone in the proper thread, but I don't like to review stuff unless I've really used it. So I pretty much forgot till I saw this post. Maybe I'll go link to this post in that thread too, but if you want pics, I remember seeing them in that thread, and in threads over on androidcentral or androidforums or something. Good luck with the case search.
I grabbed the Ballistic case for my Nexus. It's pretty rugged, stays on very well, and comes off easily when you want it too. Feels very solid in your hands.
corgan1001 said:
I grabbed the Ballistic case for my Nexus. It's pretty rugged, stays on very well, and comes off easily when you want it too. Feels very solid in your hands.
Click to expand...
Click to collapse
Dou you have i9020 or i9023 version?
These are sick... Like the Mercury, but minus the blatant Engrish
http://www.myincipio.com/Google-Nex...Ultralight-Hard-Shell-Case-1065_1566-opt.aspx
Once I got my T-Mobile Note 2, I searched the interwebs for a case that would protect the phone and make it less slippery. The quest was not an easy one, with barely any cases available, and most being replicas with different names. Additionally, none of the ones I saw offered protection around the corners, something that I find 100% essential on a case.
So after several hours on the general Galaxy Note II Accessories forum and several pages down the Amazon hole through multiple search keywords, I found the perfect case, for the time being. The case is a basic TPU S-line hybrid with an added kickstand. Nothing new or revolutionary, I'm sure, but given the lack of choices as of yet, a good one nonetheless.
The case protects, as commented, all 4 corners, and it protrudes enough that it lets you place the phone face down without suffering any damage on the screen. The kickstand works, though this is also the biggest caveat I've found.
The kickstand is on a hinge, and, to keep the case as thin as possible, the kickstand is embedded into the case. This wouldn't be such a problem, this happens on the Seidio Active, for example. However, the case is so thin that the hinges protrude too much out of the case, causing this to be the main point of contact with the surface when you place the phone on its back. It's irritating because one would hope a case would make the phone less slippery when placed on a surface than the original plastic, but hanging from two small pieces of plastic is not much better. There's always the placing the phone on its kickstand position, and that's fine, but don't think about pushing the phone hard on this position, or you'll cause the hinge to let you shift the phone to the "second" position, and, if pushed further, down to the ground.
The kickstand hasn't broken yet, but leaves uncertainty on how long it'll last. The black part of the case is grippy, specially on its sides, with the semi-see-through material being more slippery (though this is not an inconvenience, really).
All ports are well protected, but not covered, so no worries about echo issues like in other cases.
The kickstand is perfect for watching movies on the beautiful 5.5 inch screen.
The durability of the case is debatable. While I'm sure it'll withstand some falls, its purpose is more of a "now it'll not slip off my hands every time I pull it out of my pocket" than "let's toss this sucker from a 20 ft window"
This case more than serves its purpose, and at $5.98 including S&H (shipping from MN, USA), it should be in everyone's short list of capable though cheap cases.
If your phone is naked awaiting a case that fits your immediate needs, this will suffice. If you're looking for something that protects better, is more elegant, and of a known brand, the Seidio Active with Metal Kickstand is my #1 choice. But meanwhile, until it is released, I'd rather have this $6 case than go "naked".
I'm waiting for Amazon to accept all my images that I uploaded so I can provide you with images.
In the meantime, you can check out my Amazon Review here.
>>> It comes on either Black, Blue, Pink, Purple, White. I think I've also seen red, and I'm sure you can also find it on eBay.
>>> Black one seems to be "Unavailable".
Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...
BrokenPixel said:
Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...
Click to expand...
Click to collapse
Yeah I tried to do it so that the selling company was located in the US, just so it wouldn't take so long to arrive because I was holding the phone naked and it was slippery as hell.
The screen protector is a SPIGEN SGP Samsung Galaxy Note 2 Screen Protector Clear Steinheil [Ultra Oleophobic] [2-PACK]
Personally, I don't think the protector is the best, but I feel more comfortable about using my phone now. The safer the better. I got a scratch on my S2 with Gorilla Glass, because I figured "oh Gorilla Glass...don't need a protector". I tried to put protector when I first got it, but failed on 3 accounts. It just didn't look good. Wore it for a while till it looked even worse and I just simply removed it. And of course... Sh*t happens.
So this time, I ordered protector same time as case. Except it is fulfilled by Amazon so it took 2 days free shipping. I think the price is high, AND I have 2-3 bubbles that don't go away. Really, they aren't bubbles. They're specks of dust, and the surrounding area does not stick to the screen. I've thought about using the second protector but...uh I don't know.
"But it's Gorilla Glass 2, you don't need protector!" Not gonna fall twice for that. "But it's gonna interfere with the S Pen!" You know what, I think from time to time it does interfere. I've noticed sometimes while drawing that I might lift the pen but it still draws on the screen. Not sure if that's due to the screen protector or not...
Anyway, best of luck. Protect your phone with the first thing you find in the meantime until you get your case!
i see there's a minor bump on the kickstand that prevents the phone from laying perfectly flat on it's back. Is there' a slight wobble to it if you lay it flat and touch one side?
I just got this case in today and Im happy with what I got for the money.
Sent from my SPH-L900 using XDA Premium HD app
well....
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!
yusssi said:
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!
Click to expand...
Click to collapse
yeah I tried that with my GS3 it was too ghetto for me lol
Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand
....
fatboypup said:
yeah I tried that with my GS3 it was too ghetto for me lol
Click to expand...
Click to collapse
Hahahaha!! I know!!!
one80oneday said:
Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand
Click to expand...
Click to collapse
It really is thin. This may not be the best for you, but I'd say just because of the kickstand, it may hold you over until you find a better one. Personally looking forward to Trident Aegis and Seidio Active. There's also Otterbox...
I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app
jamexman said:
I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Sorry, can't help you there. I really had no problem whatsoever putting this one in. I've taken it out about a dozen times, and I've never had issues taking it out or putting it back in. I ordered the Seidio Active case, so this one will be retired soon. But while using it, my only complaint was that the stand was not reliable. That's about it.
You might want to contact the seller and get a replacement. Looks like there's something wrong with yours. Also, make sure that all ports/buttons line up, and that they didn't send you the case for the wrong phone or some such.
Good luck!
This case is "unavailable" on Amazon but there are a million of them on Ebay, in all different colors. I got one in clear because I like to show off my phone, not the case, although I know from my old iPod case that I actually like the look of a clear glass-like edge around the sides.
I just wanted to chime in that if you get the clear version, beware that it *will* stick to the back cover of the phone. It's ugly because you get these big blobs and patches, and I found it immediately unacceptable. The case only cost me $5 so I just tried sanding it down on the inside so it wouldn't stick... which technically worked, but now it's even uglier. Yeah, I ruined it, but I couldn't see using it the way it was before. I was also concerned that over time, it'd stick so hard that I wouldn't be able to get it off. Already, whenever I'd take it off, I'd hear a "crack" as it unstuck from the back cover. I'm actually still using it after the sanding and it works just fine and doesn't stick anymore, but it is ugly.
My advice is to get a solid color version of this case if you get one, and still sand the inside of it so it doesn't stick. (Though make sure it's really opaque if you sand it; if it's clear at all, you'll see sanding marks.)
I really like kickstand cases but I'm thinking now of just getting something that gives me a little better grip on the phone (like a textured back cover) and then either not getting a case at all, or getting another one of these and hoping it doesn't stick to a more matte back cover.
for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too
Pyr0x64 said:
for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too
Click to expand...
Click to collapse
U have this one? How is it like? The photo doesn't clarify a lot..
Thx
Sent from my GT-N7100 using xda premium
No, I don't have one sorry.
I just spotted it on ebay last night and thought I would post it here as an alternative for people to consider when I saw the thread earlier
I do have it in my watchlist and may purchase later, but at the moment I'm using a FlyGrip and a plain matt tpu case
The kickstand looks a bit more flush on that one. Does not seem like there is much texture in the TPU for grip though. I will let someone else be the guinea pig, but I am curious to hear about it.
Sent from my Obamaphone using Tapatalk.
Me too, I'm very curious about this case...
Sent from my GT-N7100 using xda premium
They have that one in clear now too.
It looks frosted so it probably just has a matte texture that makes it easier to grip.
I found another clear TPU case similar to the first kickstand one but minus the stand and with all 5-star reviews on Amazon... found the same case on Ebay for cheaper (under 5 bucks) so I'm trying that next. If that one still creates unsightly stickiness, I'll just go for a clear hard plastic case. I've used one of those on my iPod for literally 5 years and they are surprisingly effective and look perfect.
LOL. I ordered the clear one to try out. I am so weak and have no will power.
Sent from my Obamaphone using Tapatalk.
After searching the threads and being horrified by pictures of smashed screens, I don't think I will take my Note 2 out until I get a protective case! It recently arrived and being so used to my HTC phone which I have dropped many times and has survived falling from my lap as I get out of the car, flying out of my bag and so on, I don't think I can take this risk at all with the Note 2. A little scared it is so fragile but I am wondering if those who have had the phone for much longer have found the best way to protect the phone. I guess the days of walking down the street checking my messages are over for now (plus being afraid someone will take it from me!).
I don't mind flipcases (especially as it covers the front) but most of the cases I have seen so far only cover the back but this doesn't protect the screen, so looking for something that will protect it all round.
I had been sporting a naked note 2 until a couple days ago, but after it slipped out of my pocket while I opened the door of a moving car going 15mph (only resulting some chips on a few of the corners thank god haha) I had to get a case. I read lots of reviews and decided to get the black UAG case and I love it. I like the way the phone feels in my hand with it and it feels very protected. There are cases that are more protective but they add more bulk, this doesn't mean that the UAG won't protective because to me this thing still feels like fort Knox in my hand with it hah
Sent from my SCH-I605 using xda app-developers app
+1 for UAG. But before you decide, check out full list of cases for Note 2 I have reviewed: http://forum.xda-developers.com/showthread.php?t=2192333
vectron said:
+1 for UAG. But before you decide, check out full list of cases for Note 2 I have reviewed: http://forum.xda-developers.com/showthread.php?t=2192333
Click to expand...
Click to collapse
Wow a lot of reviews, thank you for that.
I guess I wanted extra protection for the front (when not in use) so the UAG is on hold. Went for the cheap flipcase in stead.
I have been using the Otterbox Defender for a couple of months and love it. Since I have dropped and had to replace two phones, I need the heavy duty protection. It's got a built in screen protector that covers the screen like a window. I like the fact that it makes the phone bulky, easier to hold.
Otterbox
I didn't want to give in to the Otterbox. But after I dropped my Note and scratching the S Pen, I did. I absolutely love it and it's by far the best case I've ever had. I even got one for my daughter's RAZR. She loves it also.
I've had my phone for a few days now and have really got used to the feel of it (light and smooth) but I know I shouldn't risk it. I don't really like the look of the bulky cases, and since I am a girl I want something more girly I guess, but I've gone ahead and ordered a cheap flipcase that was reviewed on this forum. Will see how that one goes for now and will upgrade as I find something for me.
Just ordered UAG white case. Awaiting....
reachnimesh said:
Just ordered UAG white case. Awaiting....
Click to expand...
Click to collapse
how much it cost you to get it delivered to India?
mani16985 said:
how much it cost you to get it delivered to india?
Click to expand...
Click to collapse
2800 inr
Free shipping
I swear by the uag cases. I've dropped my phone down concrete stairs while it's (thankfully) been in a uag and there was not a single scratch to be seen as a result of the experience. The Otterbox is just too cumbersome especially if you are like me and often switch out the batteries.
《 Sent from the mighty Note II 》
dr.m0x said:
I swear by the uag cases. I've dropped my phone down concrete stairs while it's (thankfully) been in a uag and there was not a single scratch to be seen as a result of the experience. The Otterbox is just too cumbersome especially if you are like me and often switch out the batteries.
《 Sent from the mighty Note II 》
Click to expand...
Click to collapse
Wow. You're just posting on every thread aren't you? It's like a little commercial every time I click...
Sent From My Ginormous Note 2
Shamestick said:
I had been sporting a naked note 2 until a couple days ago, but after it slipped out of my pocket while I opened the door of a moving car going 15mph (only resulting some chips on a few of the corners thank god haha) I had to get a case. I read lots of reviews and decided to get the black UAG case and I love it. I like the way the phone feels in my hand with it and it feels very protected. There are cases that are more protective but they add more bulk, this doesn't mean that the UAG won't protective because to me this thing still feels like fort Knox in my hand with it hah
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
I have the Otterbox, which I absolutely love, but it feels like the size of the phone doubles when I have it on my phone. I found another case manufactured by Seidio. It's the Seidio KONVERT combo and it has a hard outer case that goes on the phone and another rubber case that covers the hard case and is braced by a skeleton type covering. It sounds like it would be bigger than the OtterBox, but it actually isn't. THe phone looks and feels slimmer and it looks more elegant, where the OtterBox gives the phone a more ruggedized look. As far as protection, I am deployed and have dropped my phone a couple times and I haven't had any issues with it at all. Plus, you can take the rubber outer shell off and still have an good-looking inner case as well. Highly recommend it, as well as the OtterBox.
I'm looking for a protective case for my Note 2 that has a grippy/hard rubber feel that doesn't slide around when I lay it down on it's back. I have an Otterbox commuter but the back is hard plastic and slides around a lot if I lay it down unless I flip it over. My wife has an Iphone and her otterbox has a very grippy rubbery feel that is non slip. I wish their Note 2 cases were like that. I'm looking at the Griffin Survivor case and was wondering if anyone has any other recommendations before I try it out? Thanks!
dengood1 said:
I'm looking for a protective case for my Note 2 that has a grippy/hard rubber feel that doesn't slide around when I lay it down on it's back. I have an Otterbox commuter but the back is hard plastic and slides around a lot if I lay it down unless I flip it over. My wife has an Iphone and her otterbox has a very grippy rubbery feel that is non slip. I wish their Note 2 cases were like that. I'm looking at the Griffin Survivor case and was wondering if anyone has any other recommendations before I try it out? Thanks!
Click to expand...
Click to collapse
http://www.amazon.com/Duzign-Sentin...1378141878&sr=8-3&keywords=duzign+case+note+2
This case has been discussed by many on this forum and it has good reviews. It is definitely protective and grippy. You can even tell from the back rubbery design. If you want something slim, with a soft matte feel, i'd get the Six Abundant Case: http://www.amazon.com/DBA-Cases-Abu...=1378141992&sr=8-1&keywords=six+abundant+case
Wow, that first one definitely looks grippy!
Thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dengood1 said:
Wow, that first one definitely looks grippy!
Thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
You're very welcome
opasha said:
You're very welcome
Click to expand...
Click to collapse
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dengood1 said:
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
From all the reviews and things I have heard about it, it seems to be in the middle. A hard rubber. So it's good for shock absorption. Definitely not a soft rubber because that would wear out very easily. However, from what everyone in the forums have said and from the amazon reviews, it seems like it will stay in place without issue. Also, it's only $10 and from amazon. If you don't like it, you can ship it back the same day for a full refund without any cost to you. Just keep the original box/packaging.
Here's a quote from someone who has it: "The back part of the case (the black exterior) feels more like silicone than plastic which gives it a nice look and grip. I have dropped my phone once on this case and I have to say that this case does a very good job on absorbing impact."
dengood1 said:
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
It's a hard plastic exo with a softer plastic inner. I have this case and it will not hold in place on a hard flat surface. Mine will not even "stick" when placed screen down. The kickstand is about a 4/10 (flimsy, too easily collapsed etc)
Also, the buttons, imo, are junk. Last night, after I started using this case again after owning it for ~6 months (used for 2 weeks), I took a razor blade to the buttons. Couldn't stand them being so difficult to press.
However, the drop protection is definitely up to the same level as the commuter, for being such a cheap case.
I'd say it's worth the price, maybe even less.
Also, I have a similar six abundant case that was free. And although it's very nice, and my most used case, it offers very little protection, and definitely not "grippy" on surfaces.
Wish I had some suggestions. The Griffin Sur. looks grippy. If you search the forum here there are a few people that bought one and commented on the quality. I believe they don't officially support it.. So it's actually a knockoff.
Edit2: forum.xda-developers.com/showthread.php?t=2174889 has info for the knockoff griffin. Enjoy.
Brad.S. said:
It's a hard plastic exo with a softer plastic inner. I have this case and it will not hold in place on a hard flat surface. Mine will not even "stick" when placed screen down. The kickstand is about a 4/10 (flimsy, too easily collapsed etc)
Also, the buttons, imo, are junk. Last night, after I started using this case again after owning it for ~6 months (used for 2 weeks), I took a razor blade to the buttons. Couldn't stand them being so difficult to press.
However, the drop protection is definitely up to the same level as the commuter, for being such a cheap case.
I'd say it's worth the price, maybe even less.
Also, I have a similar six abundant case that was free. And although it's very nice, and my most used case, it offers very little protection, and definitely not "grippy" on surfaces.
Wish I had some suggestions. The Griffin Sur. looks grippy. If you search the forum here there are a few people that bought one and commented on the quality. I believe they don't officially support it.. So it's actually a knockoff.
Edit2: forum.xda-developers.com/showthread.php?t=2174889 has info for the knockoff griffin. Enjoy.
Click to expand...
Click to collapse
Thanks for the input, bro. That's rather unfortunate. I guess other sources don't have the best description then.
Have you looked into the body glove case? That looks pretty nice and there is a lot of discussion recently on it in the Post Your Pics of Your Phone thread. Check it out.
opasha said:
Thanks for the input, bro. That's rather unfortunate. I guess other sources don't have the best description then.
Have you looked into the body glove case? That looks pretty nice and there is a lot of discussion recently on it in the Post Your Pics of Your Phone thread. Check it out.
Click to expand...
Click to collapse
Definitely bro, maybe others will chime in with different opinions about it.
I was actually just revisiting the idea of the body glove refined gel case (been subbed to that thread for forever). I remember it being a very popular case earlier this year. At one point there was an eBay seller with ~50 of them for $8+free shipping. I should have jumped on it then. I'm just afraid that the lower section of the case (shiny area) will end up scratching easily (read: shiny back mercury case).
Still haven't even gotten around to trying the UAG... Even though I designed and 3D printed some custom inserts.
What case are you rockin?
Brad.S. said:
Definitely bro, maybe others will chime in with different opinions about it.
I was actually just revisiting the idea of the body glove refined gel case (been subbed to that thread for forever). I remember it being a very popular case earlier this year. At one point there was an eBay seller with ~50 of them for $8+free shipping. I should have jumped on it then. I'm just afraid that the lower section of the case (shiny area) will end up scratching easily (read: shiny back mercury case).
Still haven't even gotten around to trying the UAG... Even though I designed and 3D printed some custom inserts.
What case are you rockin?
Click to expand...
Click to collapse
3d printing?? Dude that's awesome! I saw on geeky gadgets or theawesomer website ad about a 3d real time laser scanner. It was really impressive. Expensive ($1400 I think) but very cool. Right now I'm using my Six Abundant Case. I rotate between that and my white UAG case. The UAG case is worth it for me. It's not super bulky and protects my phone extremely well. I have large hands so I have no problem gripping and using my phone in one hand with either case on. I do have way too many cases at this point. I even have the casemate tough. Totally forgot to mention that. That definitely has a good feel in terms of grip and it is super slim for a fully protective case. Another nice one is the DBA ultra case. I'll most likely be upgrading to the note 3 so I stopped buying more cases, lol.
opasha said:
3d printing?? Dude that's awesome! I saw on geeky gadgets or theawesomer website ad about a 3d real time laser scanner. It was really impressive. Expensive ($1400 I think) but very cool. Right now I'm using my Six Abundant Case. I rotate between that and my white UAG case. The UAG case is worth it for me. It's not super bulky and protects my phone extremely well. I have large hands so I have no problem gripping and using my phone in one hand with either case on. I do have way too many cases at this point. I even have the casemate tough. Totally forgot to mention that. That definitely has a good feel in terms of grip and it is super slim for a fully protective case. Another nice one is the DBA ultra case. I'll most likely be upgrading to the note 3 so I stopped buying more cases, lol.
Click to expand...
Click to collapse
Yeah! Got into robotics development at my University a few years back and somehow got nominated to be the guy that learns the ins/outs of our 3D printer so that I can teach others everything about it (even the computer science professors). In the printing world, $1400 is fairly cheap for a production item.
I did see the 3D scanner. I believe it is going to be made by Makerbot. We made our own using a Kinect (think: xbox 360) to do real-time scans of objects and roll them into 3D files. However, I usually make one-off prints so I have to build them entirely by hand in a 3D environment.
Agh.. You are making it hard not to press the "complete my order" button for the black uag haha. I too have large hands/long fingers; I often get my iPhone-using-friends asking me how I always use one hand with this beast. If I was a female I'm sure I'd have gained muscle from just using it by now lol.
Forgot about casemate. I'll have to check them out. (have their tough case on my Skyrocket & love it)
I'll most likely be upgrading as well (if not at least a smart watch).. So now seems like a bad time for me to by yet another case.. But.. I have an addiction lol.
Brad.S. said:
Yeah! Got into robotics development at my University a few years back and somehow got nominated to be the guy that learns the ins/outs of our 3D printer so that I can teach others everything about it (even the computer science professors). In the printing world, $1400 is fairly cheap for a production item.
I did see the 3D scanner. I believe it is going to be made by Makerbot. We made our own using a Kinect (think: xbox 360) to do real-time scans of objects and roll them into 3D files. However, I usually make one-off prints so I have to build them entirely by hand in a 3D environment.
Agh.. You are making it hard not to press the "complete my order" button for the black uag haha. I too have large hands/long fingers; I often get my iPhone-using-friends asking me how I always use one hand with this beast. If I was a female I'm sure I'd have gained muscle from just using it by now lol.
Forgot about casemate. I'll have to check them out. (have their tough case on my Skyrocket & love it)
I'll most likely be upgrading as well (if not at least a smart watch).. So now seems like a bad time for me to by yet another case.. But.. I have an addiction lol.
Click to expand...
Click to collapse
That's really nice, bro. I know $1400 is not that expensive when it refers to such technology, but I meant in general - that's like a nice fully loaded laptop price, lol. I'm familiar with Kinect/Xbox360 so yeah, that's really interesting. I'm sure the whole 3D development can take time from scratch. Maybe I missed them, but did you ever post pics of your 3D-rendered cases? I'd love to see how they turned out.
Yes, the Case-Mate Tough is solid. I have the same black one as in this teamvenum review: http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
I know you complained about the buttons you eventually cut out of your Sentinel case. This is where the UAG shines. The button design makes it super easy to press the covered buttons. The one thing I love about my UAG case is that I can just toss my phone around onto my bed or the table like whatever without any worry. The shock absorption technology on UAG cases is pretty solid. I even got one for my father's S3 and he loves it (esp since he is accident prone/clumsy with all technology, lol).
Yes, the smart watch upgrade is definitely happening for me as well. I can't wait till they release the Samsung Gear this September. It's definitely going to be a step up from my pebble watch, which I use and wear all the time.
Also, your addiction...I understand all too well, especially being a huge tech fanatic. If you don't have a solid protective/easy to hold case currently and work in an environment where you really need that, I would go for it.
opasha said:
That's really nice, bro. I know $1400 is not that expensive when it refers to such technology, but I meant in general - that's like a nice fully loaded laptop price, lol. I'm familiar with Kinect/Xbox360 so yeah, that's really interesting. I'm sure the whole 3D development can take time from scratch. Maybe I missed them, but did you ever post pics of your 3D-rendered cases? I'd love to see how they turned out.
Yes, the Case-Mate Tough is solid. I have the same black one as in this teamvenum review: http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
I know you complained about the buttons you eventually cut out of your Sentinel case. This is where the UAG shines. The button design makes it super easy to press the covered buttons. The one thing I love about my UAG case is that I can just toss my phone around onto my bed or the table like whatever without any worry. The shock absorption technology on UAG cases is pretty solid. I even got one for my father's S3 and he loves it (esp since he is accident prone/clumsy with all technology, lol).
Yes, the smart watch upgrade is definitely happening for me as well. I can't wait till they release the Samsung Gear this September. It's definitely going to be a step up from my pebble watch, which I use and wear all the time.
Also, your addiction...I understand all too well, especially being a huge tech fanatic. If you don't have a solid protective/easy to hold case currently and work in an environment where you really need that, I would go for it.
Click to expand...
Click to collapse
I never printed any cases for my Note 2, just the inserts for the UAG case with lettering and glow in the dark filament etc. I did make four cases for my gf's S3 but in the end she moved to a pink folio wallet case (which would take too much time to make haha). I've since then had two dead SD cards.. So I've lost a lot of pictures (backups are my priority every 24hrs now..). The cases were more of a "wow factor" type of thing. Everywhere we went people asked more about her case than my huge phone lol.. Lead to a lot of explanations of what a 3D printer is.. But After a few times on/off of the case they'd get weak and start to crack at random layers of which the printer printed it (our printer has a resolution of 0.001mm).
Started sanding the area of the Sentinel case today that I hacked out with the razor to make it smoother. Only had about ten minutes with some 1600grit paper, so I got one side pretty smooth!
I wanted to pledge money to the kreyos smart watch but got worried that I'd be stuck with money in the air for it and no item on my wrist until next summer.. The galaxy gear is definitely going to be watched (pun intended)! As long as it stays within $200-300..
As you can tell, it's hard for me to commit to some purchases lol!
To op: I remember seeing some peel & stick grip strips for phones. They were just thin clear gel-type adhesive strips. Been looking for them but can't find the review. Honestly, I'd also like a grippy case..
Edit: found it! www.egrips.com/ check it out.
Thanks for everyone's input...much appreciated. I own the Bodyglove case but I is still harder plastic than I would like. Its a decent case though. I had the Casemate Toughcase for my Note 1 and liked it, very protective as well, but still had a hard plastic outer shell. Maybe I'll research on getting some type of nonslip rubber strips for my Otterbox to see how that works. There are a few cases mentioned here I'll have to take a look at. Thanks again to you all.
Sent from my SGH-I317 using xda app-developers app
dengood1 said:
Thanks for everyone's input...much appreciated. I own the Bodyglove case but I is still harder plastic than I would like. Its a decent case though. I had the Casemate Toughcase for my Note 1 and liked it, very protective as well, but still had a hard plastic outer shell. Maybe I'll research on getting some type of nonslip rubber strips for my Otterbox to see how that works. There are a few cases mentioned here I'll have to take a look at. Thanks again to you all.
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Try the DBA Cases Ultra protection cases very good quality and good feel
http://www.dbacases.com/samsung.html
I have the UAG case. I have used the UAG line of cases for all my phones and they are solid. They have the bevel in the front so if it drops face down you wont shatter your screen and it has extra cushion on the corner bumpers. They are only $30 - $35 online. They fit on my OEM samsung dock with spare batttery charger.
The reason why I trust all my phones in the UAG case is that my wife's nephew through my note down the escalator at the mall. My heart stopped as I saw it tumble and bounce off every step. When I went to get it, the phone and case didnt have a scratch on it. The otterboxes are great but they are way too big. Especially for our note.
I am using a cheap eBay tpu. Smoke clear and it is rubber. It works great and protects just fine. Best of all it was only a buck and a half! Rubber does a pretty decent job of keeping it from sliding around unless it is on something very slick. keeps good in the hand too
Sent from my kraken (Note2) using xda app
I have the body glove from sprint.
I feel it offers the best for daily use and it has pocketablility which is nice. It doesn't get hung up as it has a glossy surface at the bottom of the phone.
This ballistic leather case is perfect. I've always preferred leather back covers. Always sacrificed protection, just because it was proffesional and classy looking. Burkley, Qialino, & Tetded basically I've had every flagship phone from Samsung and LG fir the last 4 years. I have 7 lines I pay for (wife & kids) so dammit I use all the upgrades, then pass phone down the line. Every 5 or 6 months when I get ready to get a new phone, I ALWAYS start looking to see if there is anyone else making something better...
This time BALLISTIC of all people had this leather case that interested me. They do an ABSOLUTELY HORRIBLE job displaying the case on the website, they state it was their thinnest ever case, but in my mind it would be BALLISTIC huge. I took a chance and bought it. So glad I did.
First, it's thin. Super thin. Like perfect man. I had the Naked Tough and it's less obtrusive than that. Plus the still have their corners integrated in, and they do not look anything but stylish and flow well with the case. It's rated at 6ft like all there cases too. The lip, which is another area of contention for me with these leather back cages is the exact perfect size. Keeps my screen elevated very well if I sit it face down. Some cases I've had would elevate screen no more the high enough fir paper to move freely. That's pointless to me, a grain of sand would still scratch the hell out of it. Not this case. I'm telling you as far as security and protection go, I do not see how any slim case could do more than this. PERFECTION.
Now the leather. The ENTIRE back is leather. Just the bottom and top edges are rubber and they are a part of the piece that makes the corners. The leather and rubber blend SEAMLESSLY. I'm telling you I do not see how this could have been done any better. Ballistic says they used what they call a "buffalo leather" and it feels very supple, but is very durable thus far.
This case is dang near perfect. If you like classy leather backs, do yourself a favor, buy this.
Um, got pics? Link to their site for purchase?
Sent from my SM-G935P using Tapatalk
damn man i thought it was ballistic glass lol
check ebay
Sent from my SM-G935V using XDA-Developers mobile app
Yea, let's see some "Real" pictures of this case.
I also believe that the leather is fake leather but still looks like an interesting case.
Well they say they are using "Prwmium" materials on this line. The call it Buffalo leather. I believe it's real. Get it on Ebay though. I paid 16 bucks. On Ballistics website it's 40
Please post some Pictures..............................
Pics or it didn't happen
On ebay chaise I saw would be about 30$ US
Sent from my SM-G935W8 using Tapatalk
I don't see it for anywhere close to $16. The cheapest I see if $24, and other sellers are $30 to $40. If you really payed $16, I suspect you got a knock off.
Guess I'm just going to have to order so we can see some real pictures of this case.
Ordered one up, should have it by the end of the week. Not available for $16.00 though.
tiny70thomas is 100% correct about this case. Got it in today and I actually love the case. It adds hardly any bulk to the phone and feels great in the hand. The power/volume buttons are just as good as the Speck candyshell grip if not better. Not sure how much drop protection it would provide and it's nothing more then a thin rubber case with thick corners. I'm almost 100% sure the leather is not real but non the less it feels great. Here are some "Real" pictures of this Ballistic Urbanite base in Buffalo Leather. I like it !
I am sorry but that looks terrible....
danlnyc said:
I am sorry but that looks terrible....
Click to expand...
Click to collapse
No, actually it's a nice looking case.
No love at all for this Ballistic case?
felloffthetruck said:
No love at all for this Ballistic case?
Click to expand...
Click to collapse
It is alright but what kinda turns me off is the texture. If it was less coarse-looking, like the OEM Samsung leather case, it would've appealed to me more.
Sent from my SM-G935P using Tapatalk