I have installed the Official CM10 roms went it went "official", i am having trouble with the in-call volume? also the people on the other end can't hear me either?
Has anyone found a fix for this, it's driving me crazy. I like the CM10 Very much, but i can't use it without being able to hear. I keep going back to DarkRaider 1.5.5 which doesn't have any issues.
HELPPPPPP!!!!
Reply
davebegue said:
This is a well documented issue in several threads in general and development sections, I say look there.
Sent from my HTC PH39100 using xda premium
Click to expand...
Click to collapse
I have been looking there, BUT NO ONE has FIXED it yet? That's what i am looking for is the FIX.
you obviously didn't read enough then. no it's not fixed it is being worked on. it works just cant raise volume and other callers can hear you. Of course you could always fix it for us
Volume
ZeRo2o9 said:
you obviously didn't read enough then. no it's not fixed it is being worked on. it works just cant raise volume and other callers can hear you. Of course you could always fix it for us
Click to expand...
Click to collapse
Do you know if it's a ROM issue, or a Kernel Issue? I've tried a couple of different Kernels with the CM10, and, i thought, it made a little difference? but not sure.
429cj said:
Do you know if it's a ROM issue, or a Kernel Issue? I've tried a couple of different Kernels with the CM10, and, i thought, it made a little difference? but not sure.
Click to expand...
Click to collapse
could be kernel, could be ROM, could be a combination. we're looking, there is not currently a fix though
we have jb kernels?
Kernels
ZeRo2o9 said:
we have jb kernels?
Click to expand...
Click to collapse
Yep, there is one out there called "Kernel usb fix cm10". there is another one Called " KangBang Kernel 2.0", there is one built into the PACman rom that can be Fastbooted.
Langbang isn't for JB as far as I'm aware.. and if so could you link me it.? And the USB fix was the default kernel home slice uploaded (I think)
Sent from my Vivid 4G using Tapatalk 2
XxSHaDoWxSLaYeRxX said:
Langbang isn't for JB as far as I'm aware.. and if so could you link me it.? And the USB fix was the default kernel home slice uploaded (I think)
Sent from my Vivid 4G using Tapatalk 2
Click to expand...
Click to collapse
The kangbang kernel is probably really old...back from when syn was working on cm10
And after that pretty much all the "jb" kernels are 99.9% the same...all based off the same source.
Sent from my HTC PH39100 using Tapatalk 2
Kernel differences
mg2195 said:
The kangbang kernel is probably really old...back from when syn was working on cm10
And after that pretty much all the "jb" kernels are 99.9% the same...all based off the same source.
Sent from my HTC PH39100 using Tapatalk 2
Click to expand...
Click to collapse
The real only differences are the OC. On USB fix one i can OC up to 1512, on the Kangbang 2.0 you can OC up to 2082? i think,
and on the PACman Boot.img you can OC up to 1728.
429cj said:
The real only differences are the OC. On USB fix one i can OC up to 1512, on the Kangbang 2.0 you can OC up to 2082? i think,
and on the PACman Boot.img you can OC up to 1728.
Click to expand...
Click to collapse
Are you saying you loaded Kangbang 2.0 on your phone with CM10 loaded? The reason I ask is the Kangbang 2.0 was based on ICS so not really setup for JB.
jtsurfs said:
Are you saying you loaded Kangbang 2.0 on your phone with CM10 loaded? The reason I ask is the Kangbang 2.0 was based on ICS so not really setup for JB.
Click to expand...
Click to collapse
Yes, i did load Kangbang 2.0 with CM10, everything seemed to be working except WIFI. I couldn't get the WIFI to turn on. But everything seemed to be working?
As I said earlier...when syn was working on cm10 he had a kangbang kernel for jb...that's probably what this guy has
Sent from my HTC PH39100 using Tapatalk 2
That kernel is old and doesn't have all the fixes that has been done to cm why are they using it
Sent from my HTC One X using Tapatalk 2
Try the new kernel or just stick with the default. Btw what the hell is linaro. Just curious. And not trying to be off topic
Sent from my Vivid 4G using Tapatalk 2
Linaro is a tool chain that you use for compiling...
Iirc it tells gcc what to do
Sent from my Vivid 4G using Tapatalk 2
mg2195 said:
As I said earlier...when syn was working on cm10 he had a kangbang kernel for jb...that's probably what this guy has
Sent from my HTC PH39100 using Tapatalk 2
Click to expand...
Click to collapse
So can't someone compare what Syn had in his kernel to what we currently have and sort of combine them?
The Sultana kernel seems to be making quite a bit of progress, and a fix to the in-call volume is being worked on, but no success yet.
Keep an eye on CM10 development and Sultana development and you will get the fix as soon as they find one. That's what I am doing.
cmerlyn said:
The Sultana kernel seems to be making quite a bit of progress, and a fix to the in-call volume is being worked on, but no success yet.
Keep an eye on CM10 development and Sultana development and you will get the fix as soon as they find one. That's what I am doing.
Click to expand...
Click to collapse
Exactly.
Related
This is the latest available stock kernel (2.6.32.17-g9a2fc16) for Sense-based Incredible's. Nothing has been modified by me, it's the actual binary built by HTC. It's included in my 10/13 stock release (from a few days ago) but figured anyone on Sense may be interested in it. Before anyone asks, I don't know what's different. We don't have the source for this yet and HTC doesn't exactly provide a change log.
http://files.virtuousrom.com/inc/kernels/virtuous-kernel_stock_v4.zip
I've been running it for a few days now and it seems rock solid to me. So, experiment with it and enjoy.
Thank you ! will try.......
Thank you Sir! I will give er a go!
Thank you !!
I've been using it a couple of days now and it seems to charge faster. I was actually able to charge my phone while playing games on it which hasn't happened since 2.1.
Sent from my ADR6300 using XDA App
so who is going to be the first to make it undervolted with all the governors available without perflock?
jasonb1985 said:
so who is going to be the first to make it undervolted with all the governors available without perflock?
Click to expand...
Click to collapse
No one yet, we don't have source.
rmk40 said:
No one yet, we don't have source.
Click to expand...
Click to collapse
oh, right. this is just the kernel, not the source for the kernel. my bad.
orcsbane13 said:
I've been using it a couple of days now and it seems to charge faster. I was actually able to charge my phone while playing games on it which hasn't happened since 2.1.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Agree, charging seems to be much faster..
I imagine this will be stock in the virtuous 3.1 release? And if so, will there still be any optional kernels upon install?
Thanks for this
spjoneser said:
I imagine this will be stock in the virtuous 3.1 release? And if so, will there still be any optional kernels upon install?
Click to expand...
Click to collapse
Yes on both. The custom kernel will remain an option, albeit unchanged since source is not available yet to update it.
rmk40 said:
This is the latest available stock kernel (2.6.32.17-g9a2fc16) for Sense-based Incredible's. Nothing has been modified by me, it's the actual binary built by HTC. It's included in my 10/13 stock release (from a few days ago) but figured anyone on Sense may be interested in it. Before anyone asks, I don't know what's different. We don't have the source for this yet and HTC doesn't exactly provide a change log.
http://files.virtuousrom.com/kernels/virtuous-kernel_stock_v4.zip
I've been running it for a few days now and it seems rock solid to me. So, experiment with it and enjoy.
Click to expand...
Click to collapse
Can we flash this kernel over the stock 2.2 release without clearing everything?
Thanks,
Jim
jmdearras said:
Can we flash this kernel over the stock 2.2 release without clearing everything?
Thanks,
Jim
Click to expand...
Click to collapse
It's just a Sense kernel, so yes.
Sent from my ADR6300 using XDA App
PonsAsinorem said:
It's just a Sense kernel, so yes.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
name it PB31IMG.zip or update.zip, or does it matter?
jmdearras said:
name it PB31IMG.zip or update.zip, or does it matter?
Click to expand...
Click to collapse
Doesn't matter. Flash through recovery.
Sent from my ADR6300 using XDA App
I'm using this on Lou's redemptive revo rom and it's sweet so far!
Works great on Skyraider 3.3 charging speeds have doubled, almost 1 percent a minute. Fast, stable, and battery life seems as good as stock 2.2 kernal...maybe even better just havent had enough time to do a full test yet.
Thanks for this.
Tired of Kings kernals always slowing down my phone and maybe with this and perflock set to be disabled on boot with SEPCPU I can keep my screen off profiles to save on some more battery life.
Just won't be able to o/c yet but not like I did much before anyway.
A bit sluggish
Sent from my Incredible using XDA App
I run Miui.us build 2.3.23 and it runs the shade.toxygene CyanogenMod kernel. Is there a better kernel I can get?
Sent from my Nexus One using Tapatalk
*le bump*
10char
i run qnd miui. nw wat benefit will i get by flashing a custom kernel over the stock kernel
Sent from my Nexus One using Tapatalk
Theshawty said:
*le bump*
10char
Click to expand...
Click to collapse
Did you just bump a thread that's less then an for hours ago created
Sent from my Nexus One using XDA
good question i will wait with you since i am looking for a good kernel to use with MIUI
race55 said:
Did you just bump a thread that's less then an for hours ago created
Sent from my Nexus One using XDA
Click to expand...
Click to collapse
Yes, I did.
Kannibalism said:
good question i will wait with you since i am looking for a good kernel to use with MIUI
Click to expand...
Click to collapse
It's not that I'm not satisfied with the kernel I run, it's just that I'm certain there's some better one out there.
EDIT: What do you think of the kernel labeled Tiamat_N1-v4.1.0? From here: http://tiamat-dev.com/mahimahi/
the kernel you mentioned is what i am currently using as testing so far its working good with MIUI 2.3.23 and it offers up to 1.2GHZ overclocking which is not stable on my nexus at least
Kannibalism said:
the kernel you mentioned is what i am currently using as testing so far its working good with MIUI 2.3.23 and it offers up to 1.2GHZ overclocking which is not stable on my nexus at least
Click to expand...
Click to collapse
Any overclock beyond 1113 Mhz is unstable.
Kannibalism said:
the kernel you mentioned is what i am currently using as testing so far its working good with MIUI 2.3.23 and it offers up to 1.2GHZ overclocking which is not stable on my nexus at least
Click to expand...
Click to collapse
sry for my noob question. but is the kernel jus for oc purpose or for overall performance(battery life,call audio quality,smoothness etc)?
cos i am happy with stock kernel. no issues at all
Sent from my Nexus One using Tapatalk
the stock kernel was good for me to it did not give me any trouble but i like to mess around with my devices the change log for the kernel can be found here
Code:
http://tiamat-dev.com/8x50-changes/
as you can see there are a few improvements to the kernel with each update
I have been having 3G mobile network issue with CM7 base ROM. On certain location, I cannot download and make or receive calls. my 3G icon arrows show upload activities but no download happening. My ISP name (Maxis Malaysia) showing as normal. I upgraded to CM7.2, tried Kang ROM, preshoot kernel and change new SIM card but doesn't help. Anyone has any ideas on this problem? ROM or Kernel issue? Thank you.
Sent from my Nexus One using XDA
Which do you find best out of pershoot's kernel, IntersectRaven's kernel or tiamat's GB kernel?
Theshawty said:
Which do you find best out of pershoot's kernel, IntersectRaven's kernel or tiamat's GB kernel?
Click to expand...
Click to collapse
hv never flashed other kernels apart from stock since its good.
isnt wildmonk's kernel the preferred one for miui???
Sent from my Nexus One using Tapatalk
Wildmonks [Kernel] [2.6.38.8 (CM7)] HAVS/SVS + 1152MHz (09/17/11)
is the best I have seen so far, used it for months and often thought I was glad I did because it seemed more stable than stock !
http://forum.xda-developers.com/showthread.php?t=693375
futiless said:
Wildmonks [Kernel] [2.6.38.8 (CM7)] HAVS/SVS + 1152MHz (09/17/11)
is the best I have seen so far, used it for months and often thought I was glad I did because it seemed more stable than stock !
http://forum.xda-developers.com/showthread.php?t=693375
Click to expand...
Click to collapse
wat are the overall performance improvements wid wildmonk's than the stock? is the battery life good?
Sent from my Nexus One using Tapatalk
I was wondering if someone could port a stable version of MIUI GB with radio and HDMI based on the modded sharp rom and kernel 2.6.35.6 because everything works there. It would be a great help as it would work 100%
Thanks in advance
If you could also point out how to port the radio and HDMI drivers for GB, that would also help. Thanks.
MIUI 2.8.3
Kernel CK 0.4d
Android 4.0.4
Sent from my Spice mi410
Two things
1. There's already a .35 based port by nitindeck.
2. Nobody has successfully ported HDMI and FM drivers to any custom roms yet.
Peacr
Sent from my FB0 using XDA
whyzee said:
Two things
1. There's already a .35 based port by nitindeck.
2. Nobody has successfully ported HDMI and FM drivers to any custom roms yet.
Peacr
Sent from my FB0 using XDA
Click to expand...
Click to collapse
Actually - This isn't true. GB roms like this one :-
http://forum.xda-developers.com/showthread.php?t=1367974
http://forum.xda-developers.com/showthread.php?t=1526848
which are based on stock and Sharp rc1 have everything working. But only GB. I actually want a similar ROM with miui settings, music, statusbar and launcher.
If i'm wrong, please don't get mad. Im a bit of a newbie
Thanks for the response
)
nachiketa.ramesh said:
Actually - This isn't true. GB roms like this one :-
http://forum.xda-developers.com/showthread.php?t=1367974
http://forum.xda-developers.com/showthread.php?t=1526848
which are based on stock and Sharp rc1 have everything working. But only GB. I actually want a similar ROM with miui settings, music, statusbar and launcher.
If i'm wrong, please don't get mad. Im a bit of a newbie
Thanks for the response
)
Click to expand...
Click to collapse
The ROMs you've quoted, like maclite macdragon, sharp mod fix 1, etc., don't quite fit in the definition of CUSTOM ROMs. They're just stock ones that have bloatware removed and are rooted. You can make those yourself by flashing an .nb0, installing CWM, taking a nandroid backup and edited through dsixda kitchen found in the forums.
The ones that are real custom ROMs like CM7 and MIUI don't have FM n HDMI working yet.
PS. for thanking a useful post I recommend the thanks button!
Peace
whyzee
whyzee said:
They're just stock ones that have bloatware removed and are rooted..
Click to expand...
Click to collapse
Takes slightly more than that :laugh:
The reason they work is the binaries are compiled exactly for that phone and are not ported or recompiled sources from elsewhere/other hardware (incl. MIUI). Unfortunately none of the manufacturers has given us proper sources for ICS to follow step. The closest it gets is the Sharp ROM, which has the newer kernel, still is GB. Kind of hybrid. If I'd make a ROM today I'd probably base it on that, same as the chaps at droidsans are doing. For the simple reason everything works...
mmaacc said:
Takes slightly more than that :laugh:
Click to expand...
Click to collapse
Not discrediting your work or anything...... Hope you have understood that already :beer:
whyzee said:
Two things
1. There's already a .35 based port by nitindeck.
2. Nobody has successfully ported HDMI and FM drivers to any custom roms yet.
Peacr
Sent from my FB0 using XDA
Click to expand...
Click to collapse
MIUI GB .35 doesnt boot,,I was tried it last month ago
Sent from my Spice Mi-410 using Tapatalk 2
Arya_3RDNumber said:
MIUI GB .35 doesnt boot,,I was tried it last month ago
Sent from my Spice Mi-410 using Tapatalk 2
Click to expand...
Click to collapse
I've used it personally and can confirm its working.
Sent from my FIH-FB0 using XDA
whyzee said:
I've used it personally and can confirm its working.
Sent from my FIH-FB0 using XDA
Click to expand...
Click to collapse
Seriously whyzee,,I had tried 3 times flash,,still doesnt boot,,stuck at boof animation
Sent from my Spice Mi-410 using Tapatalk 2
Arya_3RDNumber said:
Seriously whyzee,,I had tried 3 times flash,,still doesnt boot,,stuck at boof animation
Sent from my Spice Mi-410 using Tapatalk 2
Click to expand...
Click to collapse
I will give u the md5sum later
Sent from my FIH-FB0 using XDA
Here is a kernel build for the Samsung Galaxy Note 10.1.
Running on 1704Mhz. With extra 100, 50 and 25Mhz step. So it runs 25 to 1704 instead of 200 to 1400.
Custom bootanimation support. (Standard bootanimation wont work)
Triangle away support.
Update N8000BRV2 (ICS)
-better voltage settings
-better wifi drivers
-BFQ scheduler back
-updated linux version
-other minor tweaks
Update N8000Jelly_OC
-Build for JellyBean
edit.
N8013 and N8010 support pulled back because of the wifi problems
source https://github.com/brieuwers/N8000Kernel
Thanks to Gokhanmoral, Espenfjo, Entropy512 and Franciscofranco.
Flash tar with odin or zip with CWM.
Everything at your own risk.
Greetz Bas.
anyone test it on an n8013 yet?
n8013 support?
I am also curious to see if this works on the US version (N8013). Anyone willing to give it a shot?
Has anyone tested this yet?
Lol all these views and no one?
Sent from my GT-N8013 using Tapatalk 2
I use this Kernel on my German N8000, no Problems so far.
LayZeeDK said:
Has anyone tested this yet?
Click to expand...
Click to collapse
I'm using. nothing much different so far.
Sent from my GT-N8000 using Tapatalk 2
Thanks for the replies, but im asking if this works for the N8013 model, NOT the N8000 model...
Sent from my GT-N8013 using xda premium
XDA told me that I need to put my source code online to confirm with the gpl license.
So right now Im busy finding out how to work with github after that I will build a N8013 kernel.
Sent from my GT-N8000 using XDA Premium HD app
Check my sig for some git tips... which reminds me, Pulser asked me to write up a more detailed guide with more tips (such as how to handle branching and how to handle source releases for test kernels).
Once you've gotten familiar with git, github is as easy as "git push origin". Long-term, good git discipline will greatly improve your development workflow.
Not to seem greedy but is 1.6 the most we can squeeze out of this thing?
Sent from my GT-N8013 using Tapatalk 2
LayZeeDK said:
Has anyone tested this yet?
Click to expand...
Click to collapse
Tested and its been 2days, working great,......fast
jamesheryanto said:
Tested and its been 2days, working great,......fast
Click to expand...
Click to collapse
For 8013?
Sent from my GT-N8013 using Tapatalk 2
mitchellvii said:
Not to seem greedy but is 1.6 the most we can squeeze out of this thing?
Sent from my GT-N8013 using Tapatalk 2
Click to expand...
Click to collapse
No this is just a start in fact 1600 isnt a real OC. The settings are already in the kernel made by Samsung they just locked it at 1400.
Sent from my GT-N8000 using XDA Premium HD app
will this work on n8010, nobody seems to be working on the N8010 devise. cant wait for jellybean on my note :silly:
Issue with 5GHz Wifi
After applying this Kernel I was unable to connect to any of my 5GHz WiFi networks. Upon reverting to stock Kernel, the problem resolved.
Kernel seemed stable in all other aspects.
Running Stock XXALI1 (Rooted)
Thanks
OK - I took the plunge and tried this on a N8013. Only issue I have found is, as mentioned by MintyTrebor, with wifi. Both my 2.4 and 5Ghz work (as well as tether to the phone), but will occasionally disconnect - all I have to do to get it back is turn wifi on/off and things are good. Running at 1.6 on all cores (system tuner), very snappy (nova launcher). Benchmark tests really bumped up with this kernel. No problems with pen apps. Had one freeze, but that was after I'd installed twrp recovery.
Think I'll leave this kernel on for another day and see how the battery life is. Be great if someone could crank one of these out specifically for the N8013 to get rid of the wifi issue.
Thanks for testing kernel. Im gonna build kernel for 8013 and 8010 within 24 hours.
Sent from my GT-N8000 using XDA Premium HD app
tried my gt-n8010 and works ok upto now. not noticed anything with wireless, but theres still time lol
Thanks for the 8013 support. I'll wait for a braver soul to try it first
Do you notice improved performance at 1600? Quadrant?
Sent from my GT-N8013 using Tapatalk 2
Hi all,
First time posting in the IncS section. I bought an IncS a few days ago and I'm pretty happy with it. My previous phone was an Optimus One (P500) which was running a modded version of CM7. This is my first HTC phone so I hadn't used Sense prior to this one. After spending some time on ARHD, I've decided that I'm not a big fan of Sense.
I'm planning on flashing CM7, but I was wondering if those of you that are using CM7 (or have used it in the past) have used a custom kernel with it or is the stock CM7 kernel the best option? Am I right in assuming that Redux and XS kernels shouldn't be used with CM7 since it's a gingerbread based ROM?
Tiamat don't even think just Tiamat.
Sent from my Incredible S using xda premium
Thanks : ) I found Tiamat's kernel page and noticed the latest is 1.1.5. I'll give that one a go.
Couple of questions since I see you're using Cm7.. From checking XDA and a couple of other forums I've read there's an issue with the backlighting on the buttons not working, but I'm unclear as to whether this is still a problem since these seemed to reference older builds of Cm7 from a few months back. I noticed the newest nightly was 20121111. Would you happen to know if the backlighting problem is still there? Also, I noticed there was a fix for camera freeze that was incorporated in the stock Cm7 kernel in the last couple of months. I'm assuming this isn't in Tiamat's kernel? Looks as though his latest kernel was released last year.
bantamdraper said:
Thanks : ) I found Tiamat's kernel page and noticed the latest is 1.1.5. I'll give that one a go.
Couple of questions since I see you're using Cm7.. From checking XDA and a couple of other forums I've read there's an issue with the backlighting on the buttons not working, but I'm unclear as to whether this is still a problem since these seemed to reference older builds of Cm7 from a few months back. I noticed the newest nightly was 20121111. Would you happen to know if the backlighting problem is still there? Also, I noticed there was a fix for camera freeze that was incorporated in the stock Cm7 kernel in the last couple of months. I'm assuming this isn't in Tiamat's kernel? Looks as though his latest kernel was released last year.
Click to expand...
Click to collapse
IMO stock kernel is better choice.
Yes it's already includes camera freeze fix, so there's no need in flashing it manually. But anyway you can try tiamat+fix
I can't say anything about backlights bug, coz it was long time ago I used cm
Sent from my HTC Incredible S using xda premium
Guys I have often seen people using the term IMO in their posts... Can anybody tell me what it is?
Sent from my HTC Incredible S using xda app-developers app
@di said:
Guys I have often seen people using the term IMO in their posts... Can anybody tell me what it is?
Sent from my HTC Incredible S using xda app-developers app
Click to expand...
Click to collapse
lol imo= in my opinion
I like kaijura's kernel. I think V3 was the last one that worked on GB
damn....facepalm...
Sent from my HTC Incredible S using xda app-developers app
Thanks for the feedback everyone. I tried out CM7, both with stock kernel and the tiamat kernel. All went well initially. I couldn't believe how much more RAM I had available vs the Sense roms. After using it for a few hours the phone would freeze up at random times, and it would freeze up when I'd try to use the dialer. I ended up having to ditch CM7 and go back to a Sense ICS rom unfortunately. CM doesn't seem to have the level of development and testing on the IncS as it does on the Optimus One. With any luck there will be a stable CM10 available at some point.