CMHasty ROM
Unofficial CM10 build with optimized toolchain, Linaro and O3 Optimization
This is a CM10 build with emphasis on code optimization and speed
I not intend to add any mod or big change in original CM10 code, this ROM was build for the purpose of speed based on code optimization
It is based on latest source from CM10 with Linaro patches, a Toolchain special build for Xperia Arc CPU and personalized device tree for better device optimization
Changelog:
20131110
Revert "Enable hardware acceleration (Lower the RAM requirement)" - This was consuming much RAM and having big impact in multitasking, how this change was more visual than practical, I decided to revert to the default behavior.
Improvement in Kernel:
backport lowmemorykiller from CAF msm-3.4
Optimize page_alloc allocations
Other Tweaks
20131104
Both the ROM and the Kernel was built with a toolchain specially made for this ROM and device, designed to extract the maximum optimization, with great impact on overall performance.
Enable global Link Time Optimization (LTO)
Enable fake 720p
Enable hardware acceleration (Lower the RAM requirement)
Other small improvements
20131007
Bluetooth fixed
Other small improvements
20130930
Latest CM Updates
Compile with GCC 4.9 (improvement in speed)
New build flags (improvement in speed)
Kernel rebuild from start (improvement in speed and should solve the problem of instability in wireless)
Backport DeskClock from 4.2.2 (with Digital Widget)
Other small improvements
20130915
Latest CM Updates
Compile with GCC 4.8 (SaberMod) (big improvement in general speed)
Add Record option to Phone app (record the call from call screen)
Add Blacklist option to Phone and Messages (block call and mms from added number)
Add Signature option to Messages app (automatic sign message)
Add "Delay Message" option to Messages app (delay sending the message for a certain time)
Add Statistics option to Phone app (show stats from calls)
Add Flip option to Phone app (execute a action when flip the phone)
Kernel: new frequency table
Other small improvements
20130901
Latest CM Updates (Include new camera lib)
Dalvik JIT Patchs backport from 10.1
20130824
BIONIC Optimization for Scorpion CPU
Dalvik Patchs and FIxed Leaks
20130817
Latest CM10 changes
Build with toolchain 4.7 Linaro (cfX-Toolchain)
O3 GCC Optimization
Use specific option for processor optimizations
Compiled using -fstrict-aliasing -Werror=strict-aliasing. This enables the compiler to optimize better.
Several Linaro cherry-picks
External SD I/O Tweaks (2048 read_ahead_kb)
Enable Mass Storage
Adreno GPU Driver (JB_2.5.1)
Personalized Kernel with several patchs
Download:
ROM
Gapps
Known Issues:
None
Installation instructions:
USE INCLUDED KERNEL FOR 100% COMPATIBILITY AND OPTIMIZATION
Flash kernel (fastboot flash boot boot.img)
Install Zip
Install Gapps
Wipe Cache
It is advisable to clean the data and start from scratch, it is not mandatory for those coming from CM10 Official but is advisable.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Credits
CyanogenMod Team
FreeXperia Project
Evan McClain
cfX Team
loosethisskin
SamMobile
@mikeNG
JBMiniProject (for the Phone and MMS function)
And several other sources of information on XDA
-------------
XDA:DevDB Information
[ROM][Arc/Arc S][CM10] CMHasty - Linaro/O3/BIONIC Optimization - GCC 4.9 [20131110], a ROM for the Sony Ericsson Xperia Arc
Contributors
adrianom
ROM OS Version: 4.1.x Jelly Bean
ROM Kernel: Linux 2.6.x
Based On: CyanogenMod
Version Information
Status: Stable
Created 2013-11-04
Last Updated 2013-11-10
Download
ROM
Last Release:
20131110 - Download
Old Release:
20131104 - Download
20131007 - Download
20130930 - Download
20130915 - Download
20130901 - Download
20130824 - Download
20130817 - Download
Gapps:
Gapps-jb-20121011
Addons:
Moto Camera
Android 4.4 Camera
Kernel Mod for V6_SuperCharger by @gu5t3r
-------------
Screenshots:
I'm asking if there is any difference between this and FXP ROM orbthe difference is only compile env?
silveraero said:
I'm asking if there is any difference between this and FXP ROM orbthe difference is only compile env?
Click to expand...
Click to collapse
The differences are those described on changelog
Hello, are you sure that these are the correct Gapps?, because i read this in download link
"!!Not compatible with 4.1.x.!!
All APKs updated to 4.2.1 versions, where applicable."
Regards
atembleque said:
Hello, are you sure that these are the correct Gapps?, because i read this in download link
"!!Not compatible with 4.1.x.!!
All APKs updated to 4.2.1 versions, where applicable."
Regards
Click to expand...
Click to collapse
Indeed, the link was wrong, I fixed now. Thanks.
great job bravo .. all others have done with destructive changes rom and lost the speed and stability ...
danielxg said:
great job bravo .. all others have done with destructive changes rom anus and lost the speed and stability ...
Click to expand...
Click to collapse
Anus? HAHAHAHA.... Anyways I'm goona try the rom and report
which kernel is included ? i 've built kernel 3 updated to 3.0.91 and some patches from arco's repository msm7x30-3.0.x , and i get more antutu score than with 2.6.32 , and more than 3.4.57 kernel . but battery drains fast enough and there are some reboots
TakisBeskos said:
which kernel is included ? i 've built kernel 3 updated to 3.0.91 and some patches from arco's repository msm7x30-3.0.x , and i get more antutu score than with 2.6.32 , and more than 3.4.57 kernel . but battery drains fast enough and there are some reboots
Click to expand...
Click to collapse
The included kernel is 2.6.
Enviado de meu Xperia Arc S usando Tapatalk 4
No video thumbnails in gallery and Video plays for only 1 sec.Also i did a full wipe and using the kernel included.
Device:Xperia Arc LT15i
Edit:No such issues on naa kernel 3.4.45.
adrianom said:
The included kernel is 2.6.
Enviado de meu Xperia Arc S usando Tapatalk 4
Click to expand...
Click to collapse
support 720p ?
thanks in advance
Cheers
3andala said:
support 720p ?
thanks in advance
Cheers
Click to expand...
Click to collapse
No.
Enviado de meu Xperia Arc S usando Tapatalk 4
muzadull said:
No video thumbnails in gallery and Video plays for only 1 sec.Also i did a full wipe and using the kernel included.
Device:Xperia Arc LT15i
Edit:No such issues on naa kernel 3.4.45.
Click to expand...
Click to collapse
You did a full wipe and test with kernel inside, or test direct with 3.4?
Because I dont have this problem, and it seems to be relate to cache or previous data.
Enviado de meu Xperia Arc S usando Tapatalk 4
adrianom said:
You did a full wipe and test with kernel inside, or test direct with 3.4?
Because I dont have this problem, and it seems to be relate to cache or previous data.
Enviado de meu Xperia Arc S usando Tapatalk 4
Click to expand...
Click to collapse
Did A full wipe before flashing rom and used kernel provided but had video playback issues.Then i tried naa 3.4.45 and everything is working fine except audio lags in music player
muzadull said:
Did A full wipe before flashing rom and used kernel provided but had video playback issues.Then i tried naa 3.4.45 and everything is working fine except audio lags in music player
Click to expand...
Click to collapse
Audio lag is relate to 3.4 kernel, is a known issue with 3.4.x.
Enviado de meu Xperia Arc S usando Tapatalk 4
hey @arc-[email protected] thx and...sorry but problems translate ..
Great ROM
the Rom is smoother than it can ever be on CM10 on 2.6.x kernel
even on 2.6.x based kernel it feels like i'm using 3.4.x based kernel
truly awesome work :good: :good: :good:
New Version:
Changelog:
20130824
BIONIC Optimization for Scorpion CPU
Dalvik Patchs and FIxed Leaks
20130824 - Download
Related
Code:
#include <standard_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to use these modifications upon your own choice, and if
* you point the finger at me for messing up your device, I'll just sit and laugh at you.
*/
This kernel is based on the latest TheAceKernel http://forum.xda-developers.com/showthread.php?t=1606352 from skynet28. Big thanks to him.
FEATURES:
- most of TheAceKernel features
- battery driver made by LibiSC
- some improvements in idle support for ARM
- overlocked AHB clock at 800,768,729Mhz (improved graphic performance I think)
- some changes in net stack
- improved jhash
- patched lowmemorykiller from zImage-Mod (but it is still compatible witch memory tweaks scripts)
- kernel compression changed to XZ
- default governor is smartassV2 and removed lulzactive (doesn't works for me and made errors in dmesg)
- small changes in smartassV2
- partly disable vsync (I hope)
Hope that's all, my memory isn't good.
My sources: https://github.com/dragonnn/firekernel-ace
Download:
09.10.12
https://dl.dropbox.com/u/1664131/firekernel-09.10.12.zip
28.08.12
https://dl.dropbox.com/u/1664131/firekernel-28.08.12.zip
19.08.12
https://dl.dropbox.com/u/1664131/firekernel-19.08.12.zip
22.07.12
https://dl.dropbox.com/u/1664131/firekernel-22.07.12.zip
23.06.12
https://dl.dropbox.com/u/1664131/firekernel-aroma-23.06.12.zip
12.06.12
https://dl.dropbox.com/u/1664131/firekernel-aroma-12.06.12.zip
07.06.12
https://dl.dropbox.com/u/1664131/firekernel-aroma.zip - integrate AROMA Installer
04.06.12
https://dl.dropbox.com/u/1664131/firekernel-04.06.12.zip - for unofficial CM
https://dl.dropbox.com/u/1664131/firekernel-official-04.06.12.zip - for official CM (for now without torch, will fix it this evening or tomorrow).
http://dl.dropbox.com/u/1664131/firekernel.zip - for unofficial CM
https://dl.dropbox.com/u/1664131/firekernel-offical.zip - for official CM
Flash in recovery, but made a backup first!
For now only NON-OC version without AROMA installer, maybe that comes witch next updates.
CREDITS:
skynet28 for sources of TheAceKernel
an0nym0us_ for his zImage-Mod patches
ketut.kumajaya for blackhawk tools
LibiSC for the best battery driver
And other they patches I have used (don't remember all, just explored git repos for other phones on github).
Know bugs:
-
FAQ:
- For ROM developers, if you need the boot.img run form adb:
Code:
adb pull /tmp/boot.img
Or use qtadb, this is only way to get boot.img, and don't ask my for this on PM!
Changelog:
- update kgsl driver from teamhacksung
- update some arch specific files from teamhacksung too
- some other patches from teamhacksung (sensors, dram etc.).
29.05.2012
- screen of profile in the kernel, now when you turn of you screen you max cpu clock will by set to 320Mhz and min to 120Mhz! And when you turn it up it goes back to old clock! No need to use SetCPU screen of profile! Kernel based screen of profile is much faster and doesn't lag! Note: if you get lagy music when screen of that means you have to heavy EQ, disable it or use http://forum.xda-developers.com/showthread.php?t=1653140 works good without lag if you don't use REV or VR. Works witch any govenor
- small changes in smartassV2
Note about the update - I don't know why, but for my something sets after boot always ondemand as governor, I tried to add script to set smartassV2 as default but this doesn't work (strange), but you can easy set witch for example SetCPU/No-frills CPU Control.
31.05.2012
- create version for official CM
- update Samsung internal storage drivers and wifi driver
- new locale version
- clean up init scripts in ramdisk
- ondemand on boot bug should be fixed
4.06.2012
- finally disable vsync
- adjustable screen off profile, you can write a simple script to adjust the profile like this:
Code:
#!/system/bin/sh
echo "122880" > /sys/module/cpufreq/parameters/min_screenoff_frequency
echo "245760" > /sys/module/cpufreq/parameters/max_screenoff_frequency
Put into /system/etc/init.d/ and set permission, you can name it for example s99screenoff, you turn of the profile by writing this script:
Code:
#!/system/bin/sh
echo "0" > /sys/module/cpufreq/parameters/screenoff
- updates in zlib, vmalloc and kgsl
- update LibiSC battery driver
07.06.12
- triple buffer for framebuffer
- add oc support
- many changes in mmc driver
- sio as default I/O sheduler
- changes in kgsl driver
- fixed torch in official
- AROMA Installer package
11.06.2012
- fixes min backlight bug
- disable tripple buffer
- add 799Mhz step to save battery in non-OC
- fixes in cpufreq stats
- max in OC is now 844Mhz
- more steps in OC version
12.06.2012
- fixes OC support
23.06.2012
- new battery driver from LibiSC
- ported power supply form 3.4 kernel
- ported cpuidle from 3.2 kernel
- some changes in ext4 driver
- fixes temperature driver
22.07.2012
- update LibiSC battery driver
- some more steps in OC version
- enabled zcache
18.08.2012
- kernel compiled using gcc-linaro
- disable optimaztion for size
- optimaztion level changed to O3
- force to load module when not match version magic (no need to use kernel prefix -CLXXXX...)
- enabled memory compaction
- kernel uses mem{cpy,set}() for {copy_to,clear}_user()
28.08.2012
- battery driver back to 23.06 version witch some changes (should fix fast drop down under 20%)
- update sources to 2.6.35.14
- changes in RCU subsystem
- changes in mempolicy and ashmem
- update BFQ to v2 r1
- update Samsung modules for internal storage and wifi from KTQ
- new cool boot screen
07.10.2012
- complet rewrite and update the AROMA installer
- Add CyanMobileX support
- Fixes dead lock when system memory is low in ashmem
- Disable GENTLTE_FAIR_SLEEPERS for better perfomenc on Android
- Update BFQ to v3r1
- Add extract mode in installer - it can work on all 2.3.X ROM's (maybe stock ROM's too) but pleas don't report bugs when using this methode
- Some small changes in KSM, frontswap and cleancache
09.10.2012
- Fixed bootloop when using Adrenaline Engine (but if you allready have bootloop you need to wipe data and cache, sorry about that)
- redisable GENTLTE_FAIR_SLEEPERS
I'll wait for OC
Hi dragonn!!
I'm really happy to see that you're making your own kernel! I'll install it right away!
Just 2 questions, can i use it with last CM7 RC3 with everything working (especially the proximity sensor)? and is it updated (CL882825)?
Thank you man!
gbueno6 said:
Hi dragonn!!
I'm really happy to see that you're making your own kernel! I'll install it right away!
Just 2 questions, can i use it with last CM7 RC3 with everything working (especially the proximity sensor)? and is it updated (CL882825)?
Thank you man!
Click to expand...
Click to collapse
I don't know about the official CM, try yourself, on CM 7.2 by vo-1 works perfect. What did you mean witch "and is it updated (CL882825)"?
Great news, wonderful to see you carry on the great work of ketut, an0nym0us and skynet28 — this evolving Ace kernel is really a perfect example of how great open-source really is!!!
Nice name too! :cheers:
will my ace burn up in ashes ?
its too damm hot that kernel XD
dragonnn said:
I don't know about the official CM, try yourself, on CM 7.2 by vo-1 works perfect. What did you mean witch "and is it updated (CL882825)"?
Click to expand...
Click to collapse
I meant that in last kolja's build, the kernel is this one: 2.6.35.7-perf-CL882825. Other builds had a lower CL number (I can't remember which one) and it seems that this newer kernel is faster and less battery hungry.
So I just asked if you based your kernel in this last one or in the older ones (like ketut's I think).
Thank you very much! I'll test it ASAP!
Sent from my GT-S5830 using xda premium
gbueno6 said:
I meant that in last kolja's build, the kernel is this one: 2.6.35.7-perf-CL882825. Other builds had a lower CL number (I can't remember which one) and it seems that this newer kernel is faster and less battery hungry.
So I just asked if you based your kernel in this last one or in the older ones (like ketut's I think).
Thank you very much! I'll test it ASAP!
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
For now it is CL562111, maybe when I found the sources of CL882825 will update it. Maybe in next release. Thanks for the idea.
EDIT
I search kolja's github but the sources have CL2X, and the latest update is 10 months ago :?.
dragonnn said:
For now it is CL562111, maybe when I found the sources of CL882825 will update it. Maybe in next release. Thanks for the idea.
Click to expand...
Click to collapse
You're welcome!!
Talk to ilarrain so he can help you because he compiled it some days ago!!
Thank you very much and have a great day!
Sent from my GT-S5830 using xda premium
nice..
finally u compiled your own kernel.
btw the CL882825 and CL562111 is just kernel localversion, those numbers doesnt mean one is newer than another. samsung tends to replace kernel localversion for every gb rom updates, but it probably uses the same source.
an0nym0us_ said:
nice..
finally u compiled your own kernel.
btw the CL882825 and CL562111 is just kernel localversion, those numbers doesnt mean one is newer than another. samsung tends to replace kernel localversion for every gb rom updates, but it probably uses the same source.
Click to expand...
Click to collapse
Hmm I know this (I have problems witch script setlocaleversion witch add to localeversion "+" a the end). But maybe kolja have update his sources, or changed something into it.
an0nym0us_ said:
nice..
finally u compiled your own kernel.
btw the CL882825 and CL562111 is just kernel localversion, those numbers doesnt mean one is newer than another. samsung tends to replace kernel localversion for every gb rom updates, but it probably uses the same source.
Click to expand...
Click to collapse
Yes, sure you're right! I just thought that CL882825 was better or bug fixed compared to CL562111 (just what happened with SoD gone in official nightlies). I'm sorry!
Have it intalled now. Gonna report about bugs.
Sent from my GT-S5830 using XDA
My ace fell faster now.
TORCH DO NOT WORK
Sent from my GT-S5830 using XDA
eryst said:
My ace fell faster now.
TORCH DO NOT WORK
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
Strange, watch app are you using, for mi it works witch native CM Torch and witch Widgetsoid from dekstop. And in Camera works too. I didn't change notching in the torch driver.
I have cm7-2012520 I quess. I use normal cm app. When i turn the torch on it fc.
Edit: works in camera app
Sent from my GT-S5830 using XDA
eryst said:
I have cm7-2012520 I quess. I use normal cm app. When i turn the torch on it fc.
Edit: works in camera app
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
Maybe it is because you have official CM, it doesn't like other kernels. I don't use it so I can not help you.
dragonnn said:
Maybe it is because you have official CM, it doesn't like other kernels. I don't use it so I can not help you.
Click to expand...
Click to collapse
It does make sense so i'll flash last vo-1's build to be able to enjoy your kernel!
Just one last question: I see that there are no files inside lib/modules in your kernel so, do I have to install TheAceKernel first (it has those files) and then yours?
Thank you very much again!
gbueno6 said:
It does make sense so i'll flash last vo-1's build to be able to enjoy your kernel!
Just one last question: I see that there are no files inside lib/modules in your kernel so, do I have to install TheAceKernel first (it has those files) and then yours?
Thank you very much again!
Click to expand...
Click to collapse
Ohh, something have fails by creating zip :|, didn't se that, will fix it tomorrow, now I go sleep.
Wysłane z mojego GT-S5830 za pomocą Tapatalk
Why choose for CarbonRom?
CarbonRom is an AOSP based rom, which is always compiled with the latest linaro toolchain. The kernel also is compiled with -O3 optimizations for better performance. It also gives you a great option of customization. Reasons to go for CarbonRom are:
- Compiled with Linaro, this will make your phone ultrafast and ultrasmooth
- AOSP based, s no bloatware or other stuff
- Great Customization options
- Nice look
- HALO
- ...
Current Version
CarbonRom 2.0 is still in early stages, it's Android 4.3, but not all features are implemented!
I won't manually search for all new features, just wait for an official 2.0 changelog when it is completed.
- Android 4.3
- HALO
- DSP Manager
- New battery icons
- stability and speed enhancements
- a million other little things as well - we basically don't even sleep anymore.
What is CarbonRom?
CarbonRom is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look at, build, and use our code on CarbonDev GitHub.
We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained and can be viewed on our repository.
Special thanks also go to Slim Rom for some of their features, PA, AOKP, * * * * * @FXP, and anyone else we may have borrowed commits from that hasn't been mentioned here. *If you feel you have been unfairly left out, please - let us know.
While we make every effort to test these builds as much as possible, we are not *responsible for anything that may happen to your device, family, pets, or perception of reality. *We ask that you do your part to know your device and know how to recover from problems before you flash! *If you have questions, ask your fellow users or ask us in #teamcarbon on freenode IRC.
Screenshots
Download Carbon
All Carbon downloads and further information such as features, changelog, and FAQ can be found here in the second post of this thread and in the download tab.
I'll continue building nightlies as much as possible.
Support
1) Search. *Search, search, search. *Yes, you. *I don't care how unique or important your question is, it's very likely someone has adressed it already. *Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our goo.im page linked above. *It's new, but expanding fast. *Just like us!
3) Ask a question here. Someone will no doubt try to help you. *Warning: this help may come in the form of telling you it's a dumb question that has been asked before. *See step 1 - such are the perils of asking questions when you haven't done the research yourself. *Android is about helping yourself.
Who is the Carbon maintainer for your device?
For you guys, Xperia developer is me only, Krabappel2548. I'm the only one working for Xperia devices, maybe I'll add more devices to my support list soon. Any donations are highly appreciated, I'll always use them for my development, to buy new devices
Who are the Team Carbon members?
andros11
BigShotRob
dg4prez
Kejar31
mattmanwrx
morfic
nocoast
pixeldotz
slick_rick
winner00
Thanks to your help we now have the machines we need for nightlies. *We couldn't have done it without you! *Remember, every penny you send to us goes right back into the rom. *It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. *Your support means the world to us! *If you've enjoyed Carbon, please consider a donation toward this goal. *Thank you, and we hope you continue to enjoy Carbon!
XDA:DevDB Information
[ROM][AOSP][Unofficial]CarbonRom 2.0 beta[4.3.1][yuga][Oct 31], a ROM for the Sony Xperia Z
Contributors
krabappel2548
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock Sony 4.2.2 or other AOSP 4.2.2/4.3.x rom
Based On: AOSP & LiquidSmooth, but uses CyanogenMod device files and also AOKP etc cherry picks
Version Information
Status: Alpha
Current Stable Version: 1.7
Stable Release Date: 2013-07-11
Current Beta Version: 2.0
Beta Release Date: 2013-10-11
Created 2013-08-09
Last Updated 2013-10-31
Reserved
FAQ
Downloads Android 4.3.1
Rom: Carbon Xperia Android 4.3.1
Gapps: http://bit.ly/16bWztn
Installation instructions
Clean install
- Wipe data, cache dalvik cache
- Install CarbonRom
- Install gapps!
- Reboot device & enjoy!
Update:
- Wipe cache, dalvik cache
- Install CarbonRom
- Reflash gapps
- Reboot device & enjoy!
Working
- Everything that's not in the "bugs list"
BUGS?
- Maybe more, let me know
To Do List
- Readd all tweaks in the kernel
- Compile with linaro and -O3
- Maybe even more CPU Governors
- Maybe even more I/O Schedulars
- tell me!
Xperia Z changelog
The newer changelog can be found here: Carbon Rom
Code:
[QUOTE][B]== 11/10 Nightly ==[/B]
Updated the kernel:
- Back to CM kernel
Updated the rom:
- PA PIE
- Android 4.3.1
- A lot of minor fixes
- Latest CM, Carbon etc changes[/QUOTE]
[B]== 27/09 Nightly ==[/B]
Updated the kernel:
- Meow kernel
Updated the rom:
- A lot of stuff, too much to sum up
- Rom is a lot better and more stable now
- Latest CM, Carbon etc changes
[B]== 14/09 Nightly (yuga, odin, pollux, pollux_windy) ==[/B]
Updated the kernel:
- Nothing major
Updated the rom:
- A lot of stuff
- Latest CM, Carbon etc changes
[B]== 05/09 Nightly (yuga, odin, pollux, pollux_windy) ==[/B]
Updated the kernel:
- Nothing major
Updated the rom:
- Initial Android 4.3 release for ZL, and Tablet Z
- Dropped multi-user support
- Back to phone interface
- Fixed bluetoot toggle
- settings got some updates
- A lot of other things
- Latest CM, Carbon etc changes
[B]== 25/08 Nightly (yuga) ==[/B]
Updated the kernel:
- Added Wheatley and the great Intellidemand CPU Governor
- Added Simpele kgsl GPU governor
- CPU undervolting + min freq 192MHz
- Added USB Fastcharge
- Added SIO & ROW I/O schedular
- Added build optimizations for Linaro
Updated the rom:
- Android 4.3-r2.2
- Multi-User support
- Fixed wifi issues with newer kernel
- fixed some issues from previous release
- Latest CM, Carbon etc changes
[B]== 21/08 Nightly (yuga) ==[/B]
Updated the kernel:
- No changes
Updated the rom:
- A lot of things are updated and/or fixed!
- Speed improvements
- HALO is added
- App privacy is added
- A lot more things I can't remember :p
- Latest CM, Carbon etc changes
[B]== 09/08 Nightly (odin and yuga) ==[/B]
Updated the kernel:
- Updated to Android 4.3
- No more kernel tweaks untill they are readded in new kernel
- Latest CM, Carbon etc changes
Updated the rom:
- Updated to Android 4.3
- All my tweaks are included
- Latest CM, Carbon etc changes
Reserved
Android 4.2.2 stable version
1.7 is a pretty big update for us! Check out the changelog on our goo.im page for more, but here are the highlights:
-We've fixed PIE! It no longer decides to be invisible from time to time.
-We fixed the battery charge light! None of us use it but apparently you guys are just nuts for it!
-Dark Carbon! Huge props to Slim Roms for coming up with this unique and awesome feature.
-Lockscreen theming
-CM skinny battery is back!
-Volume key lock on silent mode option
-Backup tool - if you're flashing a new version of Carbon and already have the required version of gapps installed, it will be backed up and restored during install. This applies to system apps and custom host files as well. Please note that you should only dirty flash from Carbon to Carbon. It's ok if it's another version or a nightly - just not over other roms. Super handy for you crack flashers. Make sure you've got the most recent Gapps though, and if you're flashing from a factory reset, you'll still need to install it after install of course.
-Long pressing the "clear recents" button clears the cache
-3.4 kernel on D2xxx devices. It's finally stable enough where we're comfortable with this - remember to only flash other 3.4 kernels or it will not boot as there are rom-level dependencies.
-AOKP's awesome new navbar settings
-NFC polling mode for when you want to keep your screen off and scan tags
-MMS and call "breathe" feature. Makes the notification icon fade in and out.
-Mute dings when changing volume
-Disable/enable CRT effect on screen on/off.
-3rd party keyboard bug fixed
-deodexed again
-stability and speed enhancements
-a million other little things as well - we basically don't even sleep anymore.
Downloads Android 4.2.2 stable version
- Carbon 11/07 nightly mega: CARBON-JB-UNOFFICIAL-20130711-yuga
- Carbon 11/07 nightly mediafire: CARBON-JB-UNOFFICIAL-20130711-yuga Coming soon
Gapps: http://d-h.st/ZHm
Installation instructions
Clean install
- Wipe data, cache dalvik cache
- Install CarbonRom
- Install gapps!
- Reboot device & enjoy!
Update:
- Wipe cache, dalvik cache
- Install CarbonRom
- Reflash gapps
- Reboot device & enjoy!
Working
- Everything that's not in the "bugs list"
BUGS?
- Maybe more, let me know
To Do List
- Port kernel Gamma Control
- Maybe even more CPU Governors
- Maybe even more I/O Schedulars
- tell me!
Xperia Z changelog
Code:
[B]== 11/07 & 12/07 Nightly ==[/B]
Updated the kernel:
- Support for ZL, Tablet Z (pollux & pollux-windy)
Rom updates:
- New Loopy Smoothness tweak included by carbon :)
- Latest Carbon, CM, etc changes
[B]== 08/07 Nightly ==[/B]
Updated the kernel:
- Sound Control
- Fast Charge
- TWRP issues are solved!! :)
- ROW I/O schedular
Rom updates:
- Readded all of my tweaks :)
- Nothing spectacular I think
- Latest Carbon, CM, etc changes
[B]== 05/07 Nightly ==[/B]
Latest carbon, CM, etc changes. Nothing more
[B]== 24/06 Nightly ==[/B]
Updated the kernel:
- More governors: wheatley, intellidemand
- Added GPU KGSL governor
- cpufreq_limit for proper max scaling of all cored (test)
- Build optimizations
- Voltage Control
- 192MHz min frequency
- New kernel logo, Graphics made by Lyechee
Rom updates:
- Readded some of my tweaks
- Updated thermald & thermalengine
- New bootanimation, Graphics made by Lyechee
- Screen on delay is fixed
- Latest Carbon, CM, etc changes
[B]== 16/06 Nightly ==[/B]
Updated the kernel:
- A lot of CM commits :)
Rom updates:
- A lot of CM, Carbon etc updates
- HALO is added
- Some newer proprietary files from 407 fw (thermald, )
- Latest Carbon, CM, etc changes
[B]== 30/05 Nightly ==[/B]
Updated the kernel:
- updated kernel logo, now it is sharper and better quality
- allow proper max frequency control across all msm cores
- Disable MSM_DCVS
- Added build optimizations
- A lot of CM commits :)
Rom updates:
- A lot of CM, Carbon etc updates
- Removed goomanager
- Latest Carbon, CM, etc changes
[B]== 21/05 Nightly ==[/B]
[B]- Compiled with linaro 4.8 toolchain for more optimizations: Ultra Smooth experience from now on!![/B]
- Update my implemented tweaks
- New kernel logo again
- Fully updated proprietary files from 10.1.1.A.1.253 fw
- Latest Carbon, CM, etc changes
[B]== 19/05 Nightly ==[/B]
- Implemented some of my own tweaks
- Better graphics performance in some apps (3D Mark score is 15% higher for me then before)
- Better battery life [B]Test[/B]
- Replaced default launcher with Trebuchet for more customization
- New kernel logo
- Updated proprietary files from 10.1.1.A.1.253 fw
- Latest Carbon, CM, etc changes
[B]== 17/05 Nightly ==[/B]
- Latest CM changes
- Boot logo fixed
- Fix for heating up
- Latest Carbon changes[/QUOTE]
[B]== 15/05 Nightly ==[/B]
- Initial release for Xperia Z (yuga)
FAQ & Help Android 4.2 & 4.3
[4.2] I'm coming from a 10.1.A.1.253 rom, but my NFC doesn't work..
- Install the 10.1.A.1.253 fw FTF file again, wipe everything, exclude nothing from the flash
- Let the phone boot and update NFC firmware.
- Follow the initial wizard and reboot
- NFC will be working now
- Reflash Carbon rom
Looks very promising! Hope to test this soon :good:
OMG it looks clean!!! cant wait to try
but i guess the first release is not usable as a daily driver, right? becoz home button and pie control don't work yet
tomanlam said:
OMG it looks clean!!! cant wait to try
but i guess the first release is not usable as a daily driver, right? becoz home button and pie control don't work yet
Click to expand...
Click to collapse
Yes, I haven't had time to test it really good, it was 1am at night so I only did a quick test since it was late.
Didn't tested the release with gapps. Going to do more testing today, and will build a new nightly and try to solve some bugs
Download:
Download link added, it's yesterday's build! Enjoy the testing guys, after all, the more you test, the more bugs that will be found and can be solved
krabappel2548 said:
Yes, I haven't had time to test it really good, it was 1am at night so I only did a quick test since it was late.
Didn't tested the release with gapps. Going to do more testing today, and will build a new nightly and try to solve some bugs
Download:
Download link added, it's yesterday's build! Enjoy the testing guys, after all, the more you test, the more bugs that will be found and can be solved
Click to expand...
Click to collapse
Great Krab, Bravo.. this look promising :good:
In this rom there is Tablet UI? or Hybrid Properties like PA rom?
This rom is based on CM Rom and then have the same bug of CM rom?
Thanks
tanoxxx said:
Great Krab, Bravo.. this look promising :good:
In this rom there is Tablet UI? or Hybrid Properties like PA rom?
This rom is based on CM Rom and then have the same bug of CM rom?
Thanks
Click to expand...
Click to collapse
I don't know the CM bugs there is phablet, tablet and phone mode, but it doesn't work 100% yet, phablet works best I think.
Anyway, there is no bug like delay when turning on screen like in CM
krabappel2548 said:
I don't know the CM bugs there is phablet, tablet and phone mode, but it doesn't work 100% yet, phablet works best I think.
Anyway, there is no bug like delay when turning on screen like in CM
Click to expand...
Click to collapse
:good:
Thanks
Did some more testing, after flashing gapps, lockscreen etc all work, only bug I have until now is PIE controls don't work, so it's pretty stable
krabappel2548 said:
Did some more testing, after flashing gapps, lockscreen etc all work, only bug I have until now is PIE controls don't work, so it's pretty stable
Click to expand...
Click to collapse
Good..
i charging the XZ after i will try it and report
Krab from here http://goo.im/gapps/ are so much gapps and are old.. i confused about which of those i must to download and use?
thanks
What recovery works with this ROM? Have you got TWRP working on Xperia Z CM kernel?
Thanks
tanoxxx said:
Good..
i charging the XZ after i will try it and report
Krab from here http://goo.im/gapps/ are so much gapps and are old.. i confused about which of those i must to download and use?
thanks
Click to expand...
Click to collapse
I'm going to add gapps in the rom with today's nightly
It's JB and then the newest one: 20130301 I think
hmsq said:
What recovery works with this ROM? Have you got TWRP working on Xperia Z CM kernel?
Thanks
Click to expand...
Click to collapse
Yes, TWRP 2.5.0.0 fully functional
Sent from my C6603 using xda app-developers app
krabappel2548 said:
Yes, TWRP 2.5.0.0 fully functional
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
Brilliant will try this later on, do I have to flash the recovery before, or is it ok to go from CM 10.1 to this?
krabappel2548 said:
I'm going to add gapps in the rom with today's nightly
It's JB and then the newest one: 20130301 I think
Yes, TWRP 2.5.0.0 fully functional
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
Ok, Thanks, just flashed...
I tryed it quickly, the rom is good.. but unfortunately nothig of new about the know bugs for all Aosp rom we have now i found in this Rom the same bugs of PAC Rom
anyway Good Krab, bravo :good:
tanoxxx said:
Ok, Thanks, just flashed...
I tryed it quickly, the rom is good.. but unfortunately nothig of new about the know bugs for all Aosp rom we have now i found in this Rom the same bugs of PAC Rom
anyway Good Krab, bravo :good:
Click to expand...
Click to collapse
It's my first build I'll update this as much as possible
Please just tell me all the bugs, doesn't matter if they are present in other roms, I need to know them, I don't know what the bugs in all the other roms are
Sent from my C6603 using xda app-developers app
krabappel2548 said:
It's my first build I'll update this as much as possible
Click to expand...
Click to collapse
Yes know, and you maked a rrally good job, Bravo :good:
krabappel2548 said:
Please just tell me all the bugs, doesn't matter if they are present in other roms, I need to know them, I don't know what the bugs in all the other roms are
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
Yes, sure, is a very pleasure can help you, this are the most important bugs that i found in 15 minute of test:
1) For some people there is no BB, it says "Baseband unknown".
Workaround -> Change Mobile Network to GSM/WCDMA and reboot
2) There is a little delay when you wake up the device after a long time it is in deepsleep
3) During call, put the call on speaker and the audio is on internal speaker is gone untill reboot.
anyway good work Grab, really :good:
Can confirm that the Recovery from this ROM works with CM10.1, I did miss TWRP, so thanks for that, and at last the recovery actually reboots the system unlike the recovery from CM.
Thanks so much for this, looking forward to test out your ROM also.:good:
Official Omnirom for Sony Xperia V
OmniROM is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance, reliability and features over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
OmniROM is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts.
All the source code for OmniROM is available in the OmniROM Github repo.
We'll not support users and answer questions from users which:
- are running a custom kernel
- have flashed mods
- modified system files
- didn't follow our intructions word by word
- are unfriendly
Even if you tell us that your problem is not related to your custom kernel /mod / magic => WE DON'T CARE!
Your mod => your problem!
Official OmniROM Wiki:
http://docs.omnirom.org
First time installing OmniROM to your Xperia V, or coming from another ROM:
- Read known issues and FAQs
- Copy GApps and OmniROM ZIPs to your SDCard
- Unlock Bootloader
- Flash boot.img with fastboot "fastboot flash boot boot.img"
- Boot into Recovery (push volume down on boot if you can see sony logo)
- Flash OmniROM zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of OmniROM:
- Copy the OmniROM ZIP to your SDCard
- Boot into Recovery
- Flash the OmniROM zip from SDCard
- Reboot
Issues:
- some users reported bluetooth pairing problem.
- offline charging no animation
- Miracast not working with unlocked bootloader
Changelog Omnirom:
Kernel source: omnirom - msm8960
Device tree: Link
Vendor files: Link
Download: http://dl.omnirom.org/tsubasa/
Gapps by BaNkS: Thread
Supersu by chainfire: Download and Thread
Big Thanks to tilal6991 and DooMLoRD
XDA:DevDB Information
Omnirom - Xperia V, ROM for the Sony Xperia V
Contributors
walter79
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: JB Sony 9.2.A.1.210
Version Information
Status: Stable
Created 2014-04-22
Last Updated 2014-06-22
Reserved
!!!
There is a bug in google play service that cause battery drain because phone can not enter deep sleep.
Workaround. clear data of this service after every reboot or disable wakelock
!!!!¡!
changelog official build:
2014-XX-XX - Changelog
2014-04-08 - first official nightly build
2014-04-30 - fix boot recovery
2014-04-28 - first build with "everything" work
2014-04-22 - initial build
Homebuilds:
!!!! Please switch to ondemand cpu gov with this build. Less battery drain. !!!
kernel source: click
Whats new in homebuilds ?
Re-added cpu hotplug and switch to ondemand cpu gov.
Rom is odexed (user build)
Download: /mobile phone/Xperia V/omnirom/4.4 or /Kitkat
omni-4.4.3-20140613-tsubasa-HOMEMADE.zip
Mirror 1 (Dev-Host)
Mirror 2 (MS-onedrive)
Next homebuild:
- CPU: intelli_plug with eco mod
Reserved
Current bugs:
- bluetooth pairing problems
- no charging animation if phone is powerd off
Old bugs:
- Wifi not working - fixed 28.04.2014
- gps not working - fixed 28.04.2014
- both Camera not working - fixed 28.04.2014
- screen did not switch off after push power button. - fixed 28.04.2014
- LED (RGB) not working - fixed 28.04.2014
- TWRP recovery works only via boot to recovery or adb "reboot recovery" fixed 30.04.2014
U R THE Man!
Here is a download link that worked for me:
http://d-h.st/users/walter79/?fld_id=35528#files
Sent from my Xperia V using Tapatalk
Hell Yeesssss
Thank you very very much. Gonna try it soon and I'll report
Been waiting forever for an omni rom port. Dling atm. Gonna test battery life and reboot frequency.
Sent from my GT-N7105 using Tapatalk
A question Herr Walter:
Any chance that the kernel would work on other ROM, such as AOKP?
And, if yes, can this be made into a flashable zip?
Thank you for your input.
Sent from my Xperia V using Tapatalk
Good to see this finally coming to the V. And no the kernel is not separable from the ROM so the kernel cannot be flashed onto another KK ROM.
As for reboots, there should be none - as with the T the new kernel should fix all instability issues.
Sent from my Xperia T using Tapatalk
vrl13 said:
A question Herr Walter:
Any chance that the kernel would work on other ROM, such as AOKP?
And, if yes, can this be made into a flashable zip?
Thank you for your input.
Sent from my Xperia V using Tapatalk
Click to expand...
Click to collapse
Kernel source can work for all roms but you need to update a lot of proporitary files.
walter79 said:
Kernel source can work for all roms but you need to update a lot of proporitary files.
Click to expand...
Click to collapse
Any chances you could provide a flashable zip that includes the kernel and those proprietary files you mentioned?
I'd be willing to give this a shot.
Sent from my Xperia V using Tapatalk.
Tested this for a couple of hours.
Except the wifi/gps/camera bugs everything else seems to work fine with ART on.
The Omni switch is a really nice feature
Sent from my Xperia V using Tapatalk
WhiteNeo said:
Any chances you could provide a flashable zip that includes the kernel and those proprietary files you mentioned?
I'd be willing to give this a shot.
Sent from my Xperia V using Tapatalk.
Click to expand...
Click to collapse
It's not as simple as a quick kernel and props flash - the system depends on the kernel that is being compiled alongside - the entire ROM needs to be compiled along with the kernel or you'll get breakage.
this sounds promising...
is there anymore work planned on this rom? i would love to have omnirom...or ANY real custom ROM
I switched to kernel source from sony. Maybe i can compile new rom later. Camera is fixed some firmeware file were missing. Still problems with Wlan and GPS
I am back to omni kernel.
Wifi works now. http://d-h.st/XVF
Use wifi firmware from kernel / mint (xperia t)
check /system/etc/firmware/wlan and replace files with files from Xperia T omni.
Edit:
Recovery fixed: use this in bootrec-device
export BOOTREC_EVENT_NODE="/dev/input/event7 c 13 72"
export BOOTREC_EVENT="/dev/input/event7"
Next Camera and GPS.
both camera fixed.
next step fix gps.
edit:
gps works partial now. It did not work if you have enabled wifi
walter79 said:
both camera fixed.
next step fix gps.
Click to expand...
Click to collapse
You're awesome bro
This sounds like the rom is now ready for daily usage, isn't it? :good:
By the way, are the bsod issues gone with the new kernel source? Have you been able to test this over some time?
Sent from my Xperia V using Tapatalk.
WhiteNeo said:
You're awesome bro
This sounds like the rom is now ready for daily usage, isn't it? :good:
By the way, are the bsod issues gone with the new kernel source? Have you been able to test this over some time?
Sent from my Xperia V using Tapatalk.
Click to expand...
Click to collapse
BSOD's are now as much as you should have on a stock rom, cause it is the same kernel. So rarely Should be really stable like I have on my Xperia T!
I have to update and test my source now. If everthing works well i will build a new test rom. Files from 9.2.A.1.210 official
I m back to omnirom kernel.
Kernel works well.
ArmaNineTSeven said:
BSOD's are now as much as you should have on a stock rom, cause it is the same kernel. So rarely Should be really stable like I have on my Xperia T!
Click to expand...
Click to collapse
That's awesome! :good:
Really looking forward to test this rom!
Sent from my Xperia V using Tapatalk.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This ROM is an unofficial build on CyanogenMod 12.1. Originaly (back in November 2014), the project was only about the kernel but I thought that a full ROM might a better.
So, why would you install this ROM ?
The main reason would be to upgrade significantly the kernel :
- get rid of the old LNX.LA.3.5.1 kernel base (from February 2014) and switch to a brand new LA.BF lollipop base
- to get a smoother experience of CyanogenMod
- to enjoy some CAF taste in all of his glory
- if you are an enthusiast
This ROM uses custom HALs so I'm not responsable of incompatibility with eventual custom kernels and I won't "Add support"
ROM Features :
- Based off latest generic CyanogenMod 12.1 nightly source
- OTA updates via built-in CMUpdater (LZMA Compressed)
- Vanilla CAF LA.BF.1.1.1.c5 display HAL (improved display performance)
- Vanilla CAF LA.BF.1.1.1.c5 media HAL (improved video performance)
- Vanilla CAF LA.BF.1.1.1.c5 audio HAL (improved audio performance)
- Latest Motorola LPB23.13-37 5.1 Vendor Files
- Latest kernel.org f2fs binaries
- Vanilla CAF LA.BF.1.1.1.c5 Media Codecs / Audio Policy / Bluetooth configs
- LZMA Compressed recovery images
- QCOM Bionic Optimizations
Kernel Features :
- Based off latest CAF LA.BF.1.1.1.c5 kernel source from Qualcomm
- As clean as possible, it matches CAF
- Vanilla CAF LA.BF.1.1.1.c5 Wi-Fi Prima driver (better wifi performance)
- Uses ZEN i/O Scheluder by default
- First Lollipop Overclock
- Underclocking
- Smartmax Governor
- My own akm8963 driver re-work for LPM/HBM mode
- The best is in comming
But, why is it in alpha ?:
It's in alpha state because not many people tested it and maybe there are some unknown bugs.
Speaking of bugs here they are :
Code:
[B]Known bugs[/B]
- 5 sec blackscreen at boot (doesn't affect bootime) [B][COLOR="red"][/COLOR]the first boot blackscreen is even longer so just wait and it will boot, builds or tested do not worry[/B]
- Offline charge is broken (same reason as blacksreen)
I released even if those bugs because they doesn't break the ROM experience itself (and because I wait for realeasing this ROM since ages)
They will, of course, fixed as soon as possible.
Download :
cm-12.1-20150909-UNOFFICIAL-h2o64-falcon.zip - 206.7 mo (AFH Mirror) #CHANGELOG
Old Downloads :
cm-12.1-20150827-UNOFFICIAL-h2o64-falcon.zip (AFH Mirror)
How to install ?
If you are coming from an official CM12.1 Nightlies you should dirty flash (flash my ZIP on top of your existing rom without too much issues). If you encounter any issues (report and) do the method detailled bellow.
1) Place ROM & Gapps in your virtual SD
2) Reboot in Bootloader Mode
3) Go to "Recovery" (Vol -) and confirm (Vol +)
4) Wipe Data/Factory Reset
5) Wipe Dalvik cache
6) Install the ROM zip
7) Install the Gapps zip
8) Install SuperSU zip
9) Reboot
Sources :
All repositories are on the cm-12.1-caf branch
device/motorola/falcon : https://github.com/h2o64/android_device_motorola_falcon
kernel/motorola/msm8226 : https://github.com/h2o64/kernel_msm
manifest and build instructions : https://github.com/h2o64/android_local_h2o64
Credits :
- CyanogenMod and its contributors
- CAF (aka Qualcomm)
- Motorola
XDA:DevDB Information
Unofficial Cyanogenmod 12.1 with CAF Kernel 3.4.0, ROM for the Moto G
Contributors
h2o64
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Alpha
Current Beta Version: 2015-09-09
Beta Release Date: 2015-09-09
Created 2015-08-27
Last Updated 2015-09-11
Changelogs
New build 20150616
Code:
- Initial release
Download :
cm-12.1-20150827-UNOFFICIAL-h2o64-falcon.zip (AFH Mirror)
Click to expand...
Click to collapse
@h2o64 Good work!
Flashhhh said:
@h2o64 Good work!
Click to expand...
Click to collapse
1000 posts YAY !
I'm not a fan of CM but my brain forces me to try this...
Can't try this ROM right now since I use my moto g as my daily driver but good to see some nice development going on!
pfufle said:
Can't try this ROM right now since I use my moto g as my daily driver but good to see some nice development going on!
Click to expand...
Click to collapse
It's fully stable, you just don't see 5 sec from the bootanimation.
I will install it and try it but I need to charge my Moto G Good job !!!
Damn, bootanimation doesnt show at all, i reflashed three times thinking something was wrong, and i lost patience thinking my phone turned off after google logo, but it booted. It works great btw, stable and all, and overall fast. Nice work. Now just remove the stupid cm theme engine and implement layers, and you have most custom unoffical cyanogenmod rom.
DeHuMaNiZeD said:
Damn, bootanimation doesnt show at all, i reflashed three times thinking something was wrong, and i lost patience thinking my phone turned off after google logo, but it booted. It works great btw, stable and all, and overall fast. Nice work. Now just remove the stupid cm theme engine and implement layers, and you have most custom unoffical cyanogenmod rom.
Click to expand...
Click to collapse
Yeah, the bootanimation bug is annoying, but you'll see that you get just a 5 sec blackscreen on reboots. It was just the first boot xD
Hmmm ... I don't think I will remove the CM Theme Engine : as I said, this project wasn't a ROM originally (I made a ROM to avoid HAL issues actually) I just wanted to make big background optimizations. So on the apparence/look part, I won't differ from CM.
My opinion (is still black screen after flashing). Just make optimizations and don't change the features or other things. To be just an optimized CM 12.1 ROM.
h2o64 said:
Yeah, the bootanimation bug is annoying, but you'll see that you get just a 5 sec blackscreen on reboots. It was just the first boot xD
Hmmm ... I don't think I will remove the CM Theme Engine : as I said, this project wasn't a ROM originally (I made a ROM to avoid HAL issues actually) I just wanted to make big background optimizations. So on the apparence/look part, I won't differ from CM.
Click to expand...
Click to collapse
Too bad, well i guess i'll stay with the stock theme then, because i seek for stability, and that's pretty rare nowadays.
---------- Post added at 12:27 PM ---------- Previous post was at 12:25 PM ----------
And we can expect updates on this project? I'm not asking for ETA, i just want to be shure this is not a one time thing
omg, thanks for this @h2o64.. gonna try it out...
Eurofighter_ty said:
My opinion (is still black screen after flashing). Just make optimizations and don't change the features or other things. To be just an optimized CM 12.1 ROM.
Click to expand...
Click to collapse
This 5 sec black screen will stay until I fixed SOL in MDSS.
DeHuMaNiZeD said:
Too bad, well i guess i'll stay with the stock theme then, because i seek for stability, and that's pretty rare nowadays.
And we can expect updates on this project? I'm not asking for ETA, i just want to be shure this is not a one time thing
Click to expand...
Click to collapse
All my working projects (AOSParadox, TWRP, or CM now) are getting continuous work and updates. I just don't like to post "empty" updates with an un-interessting changelog.
I just made the first stage of this project xD So much is about to come
Thanks for supporting
forgot to ask, if compile the kernel and use to latest nigtlies. it will be okay? @h2o64
hurtsky said:
forgot to ask, if compile the kernel and use to latest nigtlies. it will be okay? @h2o64
Click to expand...
Click to collapse
Sure
Oops
Forgot to add a kernel feature in the list
- My own akm8963 driver re-work for LPM/HBM mode
Click to expand...
Click to collapse
h2o64 said:
Forgot to add a kernel feature in the list
- My own akm8963 driver re-work for LPM/HBM mode
Click to expand...
Click to collapse
Dual sim working ? I mean this is cm so hopefully it is working .. But when I flashed it , it stays on black screen..... For almost 2 min
sachoosaini said:
Dual sim working ? I mean this is cm so hopefully it is working .. But when I flashed it , it stays on black screen..... For almost 2 min
Click to expand...
Click to collapse
Yes it should be supported
It's normal don't worry
Hi,
I installed all my apps about 30 apps and every app work without problems fc or other problems except one: Zonga - it's a music streaming app developed by Vodafone Romania and in other ROMs it's working but here it doesn't have sound and If I press play doesn't play from first I need to skip the track and the next one plays without music.
I will attach soon a logcat.
-Xtreme Kernel for Samsung S6 Edge + on GraceUX and Note7 port roms ( made for my old S6e+ friends as per requests )
based on same source for Note 5 adapted to S6 Edge+ (https://forum.xda-developers.com/note5/development/kernel-samsung-galaxy-note-5-sm-n920-t3396722 )
- DISCLAIMER
I AM NOT RESPONSIBLE,NOR XDA, FOR ANY BRICK OR HARM THAT MAY OCCUR ON YOUR DEVICE,YOU ARE THE ONLY RESPONSIBLE OF USING ANY FLASHABLE FILES ON YOUR PHONE,BY FLASHING THIS KERNEL, I ASSUME THAT YOU AGREED TO THIS TERM AND YOU ARE DOING IT AT YOUR OWN RISK ! THINK TWICE BEFORE ENGAGING YOUR OWN RESPONSABILTY !
BUT SO FAR, THE KERNEL IS WORKING FINE ON MY SAMSUNG GALAXY NOTE 5 SM-N920C ,AND ALL BETA TESTERS ARE CONFIRMING VIA REPORTED FEEDBACKS THAT THIS KERNEL IS WORKING FINE TOO ON THEIR SAME DEVICE.RE-THINK AGAIN BEFORE FLASHING.
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++++++++++++++++++++++++++++++++++
- Xtreme-UX-KERNEL V1
* Kernel Features:
- Compiled with latest new optimzed UBERTC Toolchain 6.2 with Latest featured GCC 6.2.1
- Based on latest available AOSP kernel official korean open source code N920KKKU2CPJ4 (link below)
- Patched to Linux 3.10.104
- Note 7 Stock patched ramdisk based on N930FXXU1APGI (tweak and patch applied)
- Mount partition with noatime option.(reading accesses will no longer cause the atime information.Performance gains)
- SELinux set to Permissive
- Auto-Root included and updated to latest SU 2.79 (credits and thanks @Chainfire)
- Graphite enabled for high level memory optimizations
- Optimized Row I/O scheduler
- Deepsleep optimized with lot of improvments
- Tweaks for ram swappiness
- Westwood default algorithme as a Tcp congestion control strategie for better internet speed
- Optimized Interactive governor
- GPU enhancement for smooth experience and better rendering
- Better stability and reliability
- Improved Battery life
- BUG FREE (no random reboots,reboots,freeze,hangs,crashs,black screen at wakeup..etc)
++ more to come..
Important Note:
- Call waiting issue is a known bug on official ux korean firmware,it's not kernel related so ask rom devs for fix or look for it on xda.
================================================== ==================================================
++Credits:
- Samsung and Linux for the Kernel Open Source Code
--- Samsung open source code link : http://opensource.samsung.com/recept...rchValue=n920s
--- Linux kernel open source code link : https://www.kernel.org/
++Credits and Thanks for Elite Devs for their inspirationnal,heads up and for cherry-picking some of their commits on various git reposAndreiLux @halaszk @franciscofranco @Imoseyon @faux123 @dorimanx @djvoleur @googyanas @Chainfire for SuperUser @craigacgomez.......
++Credits to All Group friends/testers.( Special thanks to Denis1928, Andrea(Radex) )
If i unintentionnaly forgot someone,i'll be honored to add him ,just pm.
================================================== ================================================== ================================================== ==================================================
- Steps for flashing kernel:
I assume that you are already on a rooted device with TWRP 3.0.x.x installed,if not,useful posts on how to root and install twrp can be found on Xda,just do a search.
1 - enter recovery mode via twrp
2 - Wipe cache and Dalvick/ART cache ( important step or junk files will lead to internal conflicts like freeze lags or random reboots)
3 - Flash kernel and reboot,(it will bootloop once,just don't touch it and don't panic)
4 - After complete reboot,don't use the phone and let the kernel settle for 5 minutes for better hardware and firmware integration,if u use it while rebuilting cache and integrating,you may experience lags or freeze,so let it install comfortably before starting usage.
5 - after step 4 , you can use the kernel. A second reboot is advicable but not obligatory,it's up to you.
6- Enjoy Xtreme Kernel !
==================================================================================================== ====================================================================================================
- Download
Link for Xtreme UX Kernel V1
XDA:DevDB Information
[XTREME-UX- KERNEL]- V1 -[UBERTC 6.2 - GCC 6.2.1] -S6 Edge plus- GraceUX, Kernel for the Samsung Galaxy S6 Edge+
Contributors
SpiritualWarrior
Source Code: https://www.androidfilehost.com/?fid=457095661767129755
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2017-01-15
Created 2017-01-15
Last Updated 2017-01-15
AOD Working?
Nico97 said:
AOD Working?
Click to expand...
Click to collapse
i have the same question
works on G928F using A8 port Rom ??
Sent from my AwEsOMe Samsung Galaxy S6 Edge + using Tapatalk....
been waiting for this moment thanks! hope you continue to support s6e+ device
Not Working.. AOD....
blackbravo said:
i have the same question
Click to expand...
Click to collapse
AoD is NOT supported
There is a freezing problem when making a call
Works amazing. Improvement noticed so far: better battery life, faster response, smoother scrolling and a general solid feeling. Thanks !
G928F
@ambasadii note7 port. Heavily debloated
thools60 said:
Works amazing. Improvement noticed so far: better battery life, faster response, smoother scrolling and a general solid feeling. Thanks !
G928F
@ambasadii note7 port. Heavily debloated
Click to expand...
Click to collapse
[email protected]
，his rom you can choose in addon
whatever you like,
also rom more slim ,battery life get better
this is perfect opinion for me
xprice16 said:
There is a freezing problem when making a call
Click to expand...
Click to collapse
Like in what conditions? Using xposed if yes, modules. What Rom and bla bla... Give more info please.
Here i have Lam's grace v2 with 928F and with many xposed customizations, i have no problem on calling
This better kernel lolll, l Lovee this kernel, Good Baterry life!!! Lolll much fast!!!
Denis1928 said:
Like in what conditions? Using xposed if yes, modules. What Rom and bla bla... Give more info please.
Here i have Lam's grace v2 with 928F and with many xposed customizations, i have no problem on calling
Click to expand...
Click to collapse
I was using note 7 port rom (ambasadii). It freezes when you call it,So I switched to stock rom
Plz support AOD :/
Waelby said:
Plz support AOD :/
Click to expand...
Click to collapse
l'too need please someone ???
Diegocbv111 said:
l'too need please someone
Click to expand...
Click to collapse
if you guyz badly want aod you can flash khongloi rom its kernel supports AOD and 100% working
imfuzzyyy said:
if you guyz badly want aod you can flash khongloi rom its kernel supports AOD and 100% working
Click to expand...
Click to collapse
Yes man more this rom no is much fast, I did not like her.. batery life is bad..
l'prefer note 7 port by ambasadii.
Working great for g928k variant. Very fast Thank you
Why are there two threads? It's one kernel only for UX roms and the other one not? I'm confused...
What is the better note 7 port working with this kernel?? I need the best in battery life