Database Develop

[Q] Samsung Galaxy s stuck in loop with Ultimate rom ?

Hi Guys,
apologies in advance but I have Galaxy S and since this morning it s just in boot up mode was flashed and rooted with ( Ultimate Rom ) so all i get when i press power button is ultimate home page and then second ultimate loading up page and thats it does not open up properly and it vibrates too ??
I have tried the volume up button power button and home button but nothing just comes up galaxy s black page then ultimate then back to Back Galaxy page < Please help as im so crap at this and got help from someone on here a while plase advise and help in english lol ???
Thanks
charlie2

Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA

Talon26 said:
Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??

can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551

charlie2 said:
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
Click to expand...
Click to collapse
Yes you can use a jig that would be easiest and best for the future in-case you run into this again...
However i don't understand why download or recovery is not working if you are already on custom, you have achieved it before right? If not use a video to help.
However if the standard methods do not work then there are sill some tricks..
1. Take out the battery>>>Hold the button combo>>>Insert battery whilst holding combo>>>When the boot screen appears (Samsung GT-I9000) hold for about half a second/whole second then release>>>Wait. If it continues to boot loop again then take out battery
2. From task manager close all Kies apps/processes>>>Put your usb cable in>>>plug in your phone>>>hold the combo>>>Wait.
3.Take out battery>>>Do all of 2>>>When the USB is connected to phone whilst holding the combo insert battery>>>Wait.
4. Repeat 3 with charger instead of the USB cable
If none of that works then yes i think you will need to make or buy the jig. (Or borrow if you can). But also do a search as im not sure if i covered all the tricks. There used to be a thread on it in the general section, try search for it.
charlie2 said:
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??
Click to expand...
Click to collapse
Sammoblie.com, [Ramad] Stock Firmware or Darky 10.2RE
Sammobile.com is straight forward. Click on smartphone, then android etc. Just follow the clicks then you select the FW that is relevant to you based on country and provider... If use the Ramad link then you will need your csc code which will be retrievable from the sammobile site its at the bottom.
Good luck

guy7685 said:
can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
It says JIG Detected but nothing else ?
Is my phone dead for good ?
Also the link you gave is dead no go ?

Please help im stuck need step by step advice still a real novice ???

charlie2 said:
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
Click to expand...
Click to collapse
Excelent this is exactly what you need to happen
charlie2 said:
Please help im stuck need step by step advice still a real novice ???
Click to expand...
Click to collapse
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset

Lexrsk said:
Excelent this is exactly what you need to happen
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset
Click to expand...
Click to collapse
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2

charlie2 said:
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2
Click to expand...
Click to collapse
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version

Lexrsk said:
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version
Click to expand...
Click to collapse
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2

charlie2 said:
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2
Click to expand...
Click to collapse
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.

Lexrsk said:
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.
Click to expand...
Click to collapse
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2

charlie2 said:
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2
Click to expand...
Click to collapse
when you are saying that it is doing nothing is odin flash failing ??
Flash completing and then phone not booting??
If the stock ROM is not working try Darky's 10.2 as it will generally work when other methods fail.

Mate , I can not thank you enough i tried again after i last put message on here and all done i now have 2.3.6 and as far as i am concerned all ok now. I did have to get into recovery mode after i used Odin for mob to start up and just did a system rebbot or should i say factory rebbot. All ok now and alot of songs i had were all still on memory card ok had to re install apps i had before but hey ho.
any advice on battery usage ?
a big big thankyou
Thanks
charlie2

charlie2 said:
any advice on battery usage ?
a big big thankyou
Thanks
charlie2
Click to expand...
Click to collapse
I personally use juice defender. works for me.
If i help just hit the thanks button...

Lexrsk said:
I personally use juice defender. works for me.
If i help just hit the thanks button...
Click to expand...
Click to collapse
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2

charlie2 said:
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2
Click to expand...
Click to collapse
No problem mate.
Just trying to help where i can

Help me rooting my sgs i9000 runnin value pack 2.3.6

Hey guys am new to dis forum and I wanna root my sgs i9000
its an indian version phone n here r d details
PDA - i9000ddjvb
Phone - i9000ddjv7
Csc - i9000ddjvb
Firmware version - 2.3.6
Baseband version - i9000ddjv7
Kernal version - [email protected]#2
Built num - gingerbread.ddjvb
Pls help me n pls provide me step by step instructions as am an begginer n wanna root my handset .. pls help me out guys
Thanks.

afaik there's no rooted kernel for this rom.
you can try that, anyway.
1 - google for "odin" and download it on your pc. or take this http://forum.xda-developers.com/showthread.php?t=1464775
2 - similarly, install samsung kies (so you have samsung drivers)
3 - download semaphore_2.7.4_sc.tar kernel http://forum.xda-developers.com/showthread.php?t=1112908
4 - download original kernel from ramad's thread http://forum.xda-developers.com/showthread.php?t=1102881
4 - turn off your phone, that press power+volume_down+home until you enter download mode (yellow pic on screen)
5 - run odin.exe (as administrator in win7). make sure kies is not running on your pc before running odin.
6 - connect your phone to pc via usb
7 - in odin select as "pda" the semaphore kernel. leave all options as defaults. execute it. this is done in a few seconds. this way you are rooting you phone (aka adding busybox) and installing superuser.apk
8 - unplug usb.
9 - let the phone reboot. then turn it off back again, and get once again in download mode (power+volume_down+home).
10 - run odin.exe (as administrator in win7)
11- connect phone to pc via usb
12 - in odin select ramad's jvb kernel as "pda". execute.
13 - start phone, to be sure reinstall superuser from google play
14 - you're done, now you are rooted with original jvb kernel.
I do not know if this is a robust procedure, but it worked for my italian jw7 rom, hope it is ok for you too.
after gaining root privileges, you can remove semaphore.apk from /system/app with root explorer (download from google play)

Do u think it ll work
lcampori said:
afaik there's no rooted kernel for this rom.
you can try that, anyway.
1 - google for "odin" and download it on your pc. or take this http://forum.xda-developers.com/showthread.php?t=1464775
2 - similarly, install samsung kies (so you have samsung drivers)
3 - download semaphore_2.7.4_sc.tar kernel http://forum.xda-developers.com/showthread.php?t=1112908
4 - download original kernel from ramad's thread http://forum.xda-developers.com/showthread.php?t=1102881
4 - turn off your phone, that press power+volume_down+home until you enter download mode (yellow pic on screen)
5 - run odin.exe (as administrator in win7). make sure kies is not running on your pc before running odin.
6 - connect your phone to pc via usb
7 - in odin select as "pda" the semaphore kernel. leave all options as defaults. execute it. this is done in a few seconds. this way you are rooting you phone (aka adding busybox) and installing superuser.apk
8 - unplug usb.
9 - let the phone reboot. then turn it off back again, and get once again in download mode (power+volume_down+home).
10 - run odin.exe (as administrator in win7)
11- connect phone to pc via usb
12 - in odin select ramad's jvb kernel as "pda". execute.
13 - start phone, to be sure reinstall superuser from google play
14 - you're done, now you are rooted with original jvb kernel.
I do not know if this is a robust procedure, but it worked for my italian jw7 rom, hope it is ok for you too.
after gaining root privileges, you can remove semaphore.apk from /system/app with root explorer (download from google play)
Click to expand...
Click to collapse
do u think it ll work coz if ders any danger of bricking my phone i won try pls help me out or else suggest me to downgrade and den root .. pls help me out

vitesh said:
do u think it ll work coz if ders any danger of bricking my phone i won try pls help me out or else suggest me to downgrade and den root .. pls help me out
Click to expand...
Click to collapse
since your phone is not rooted you have to use odin anyway.
"superoneclick" methods do not work with sgs1.
hence, you have to flash a pre-rooted kernel to gain root permissions.
after that you can flash the original kernel thus restoring the original state of the phone, apart from rooting it. you don't lose any data or setting, by the way.
since it looks like you're a cautious guy, I suggest you to study a little bit more thru the forum to understand how flashing kernels with odin works.
you can start by downloading odin, kies, and both kernels, and the whole original rom (you can find that in ramad's thread as well). Ramad's thread explains exactly how to flash with odin, btw.
I'm glad to help, but I'm not taking any responsibility on your behalf. do it at your own risk.

thanks broo ..
lcampori said:
since your phone is not rooted you have to use odin anyway.
"superoneclick" methods do not work with sgs1.
hence, you have to flash a pre-rooted kernel to gain root permissions.
after that you can flash the original kernel thus restoring the original state of the phone, apart from rooting it. you don't lose any data or setting, by the way.
since it looks like you're a cautious guy, I suggest you to study a little bit more thru the forum to understand how flashing kernels with odin works.
you can start by downloading odin, kies, and both kernels, and the whole original rom (you can find that in ramad's thread as well). Ramad's thread explains exactly how to flash with odin, btw.
I'm glad to help, but I'm not taking any responsibility on your behalf. do it at your own risk.
Click to expand...
Click to collapse
hey i followed d way u said n it worked smoothly .. thanks a loy bro .. and now u can u tell me how to go for a custom rom and upgrade my handset to ICS is it possible or do i need to make any more chnges to my handset .. lemme no asap .. thans in advance ..

I thought you wanted to root the phone for basic mods and removing samsung bloatware, not for flashing a custom rom. That's another matter.
if you want to flash a custom rom you need cwm recovery. this is a tool you get in "recovery mode", turn phone off and then power+volume_up+home to get there. some gingerbread custom roms can be flashed with odin, but as far as I know, you can't for ics or jb.
stock recovery won't let you flash any rom.
you do not have cwm recovery on your stock kernel.
to root any custom rom, you have to flash semaphore back again, and stick with that. with semaphore you have cwm recovery, so choose the rom you want to install and follow its thread instructions.
BUT: I've tried LOADS of custom roms, and never been fully satisfied with anyone of them. reboots, phone turns off by itself, limited functionalities, small bugs...
always reverted back to (rooted) stock. I'm never ever going to flash any rom but a stock one anymore. Of course you'll find different opinions on that on xda, this is just my 2 cents.
Lastest stock roms (2.3.6) are fast, smooth and completely bugfree.

Thanks in advance
hey thnks in advance but one of my frns has rooted to ics n he is telling tat phone works smoothly only for video recording and another one app .. rest works fine for him

anything for ram space .. i just have 364 mb ram wich gets almost full quite aftr using d net or running any apps .. pls suggest me any app or anythin wich i can do to increase my ram storage and other things ..

vitesh said:
anything for ram space .. i just have 364 mb ram wich gets almost full quite aftr using d net or running any apps .. pls suggest me any app or anythin wich i can do to increase my ram storage and other things ..
Click to expand...
Click to collapse
search threads for himem kernels. you'll find many of them. you'll probably get another 20 or 30mb. but I'm not going to suggest something I've never tried. current ram to me is more than enough.
regarding ics being faster and smoother, that's a matter of debate. my opinion is that the fastest rom around is cm7.2 (gingerbread), much faster than any ics rom. much more. At least among those I've tried.
the whole point about custom aosp roms is that samsung never released source code on some drivers, hence the little bugs here and there in cm7/9, ics, jb, and so on. that's why stock roms are superior, imho.
if you really want ics, move to sgsII or sgsIII

Rooting query
vitesh said:
Hey guys am new to dis forum and I wanna root my sgs i9000
its an indian version phone n here r d details
PDA - i9000ddjvb
Phone - i9000ddjv7
Csc - i9000ddjvb
Firmware version - 2.3.6
Baseband version - i9000ddjv7
Kernal version - [email protected]#2
Built num - gingerbread.ddjvb
Pls help me n pls provide me step by step instructions as am an begginer n wanna root my handset .. pls help me out guys
Thanks.
Click to expand...
Click to collapse
Hi could you kindly share your detailed procedure of rooting the phone ? as well as any custom rom that you tried after rooting.

mailppl said:
Hi could you kindly share your detailed procedure of rooting the phone ? as well as any custom rom that you tried after rooting.
Click to expand...
Click to collapse
you can flash a Semaphore kernel as PDA in Odin 3, and you will have root as well as CWM or you use any other rooting method from My Android Collections

xsenman said:
you can flash a Semaphore kernel as PDA in Odin 3, and you will have root as well as CWM or you use any other rooting method from My Android Collections
Click to expand...
Click to collapse
Thanks , but could you kindly elaborate a bit more about the process, since I am a newbie to this process. Appreciate your patience .
Regards,
Kaustav.

mailppl said:
Thanks , but could you kindly elaborate a bit mhttp://forum.xda-developers.com/showthread.php?t=1778526re about the process, since I am a newbie to this process. Appreciate your patience .
Regards,
Kaustav.
Click to expand...
Click to collapse
Regarding the rooting process, read the first page. Updating to JB,.......
http://forum.xda-developers.com/showthread.php?t=1778526

ierofantis said:
Regarding the rooting process, read the first page. Updating to JB,.......
http://forum.xda-developers.com/showthread.php?t=1778526
Click to expand...
Click to collapse
Wont help I guess .. as its the procedure for flashing the custom ROM, I was looking for the procedure for rooting Galaxy S GT I9000 on DDJVB Gingerbread 2.3.6 Firmware with CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip using ODIN 3 as suggested above.

mailppl said:
Wont help I guess .. as its the procedure for flashing the custom ROM, I was looking for the procedure for rooting Galaxy S GT I9000 on DDJVB Gingerbread 2.3.6 Firmware with CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip using ODIN 3 as suggested above.
Click to expand...
Click to collapse
ok, I wrote this for a Samsung M110S, What and How to Root so instead of the files mentioned, use the correct ones as given earlier or what you have already mentioned
you are going to do the same procedure but use the i9000 files
Files Needed:-
1. odin3
2. rooting kernel
Lets start :-
1- Download odin3 and one kernel file as given above that you wish to use
2- Unplug any USB device attached to your Computer and shut down kies (if running)
3- Power off the phone.
4- Press and hold Home button with Power button. your phone will go into [Download Mode]
5- run Odin in your PC
6- connect phone in download mode with computer using USB cable [ Odin will detect] and Com port will turn Yellow color
7- Check the PDA radio button and browse for file the kernel of your choice that you have downloaded earlier, than click open
8- Press start button. Odin will start flashing and comport button will turn Green and it will inform you to remove USB connection
9- Phone will reboot and you got your phone rooted

xsenman said:
ok, I wrote this for a Samsung M110S, What and How to Root so instead of the files mentioned, use the correct ones as given earlier or what you have already mentioned
you are going to do the same procedure but use the i9000 files
Files Needed:-
1. odin3
2. rooting kernel
Lets start :-
1- Download odin3 and one kernel file as given above that you wish to use
2- Unplug any USB device attached to your Computer and shut down kies (if running)
3- Power off the phone.
4- Press and hold Home button with Power button. your phone will go into [Download Mode]
5- run Odin in your PC
6- connect phone in download mode with computer using USB cable [ Odin will detect] and Com port will turn Yellow color
7- Check the PDA radio button and browse for file the kernel of your choice that you have downloaded earlier, than click open
8- Press start button. Odin will start flashing and comport button will turn Green and it will inform you to remove USB connection
9- Phone will reboot and you got your phone rooted
Click to expand...
Click to collapse
Thanks a ton...going ahead...will let you know in sometime...

just to add to the earlier post, just in case you have never entered download mode before
For i9000 :- you hold the Volume Down + Home + Power
Note:
When using Odin to Flash, Open task manager and close these : Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe

xsenman said:
just to add to the earlier post, just in case you have never entered download mode before
For i9000 :- you hold the Volume Down + Home + Power
Note:
When using Odin to Flash, Open task manager and close these : Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe
Click to expand...
Click to collapse
Hi Senman,
I have check and KIES is not running , but facing a issue in Odin3 v3.04 , the COM port is not turning yellow after i connect my phone thru usb in download mode. Anything to do with usb debugging enabled/disabled?
Regards,
Kaustav.

mailppl said:
Hi Senman,
I have check and KIES is not running , but facing a issue in Odin3 v3.04 , the COM port is not turning yellow after i connect my phone thru usb in download mode. Anything to do with usb debugging enabled/disabled?
Regards,
Kaustav.
Click to expand...
Click to collapse
yes, enable USB debugging and restart ODin3, always restart after any flash or problem
Odin v3 will turn blue, not yellow

xsenman said:
yes, enable USB debugging and restart ODin3, always restart after any flash or problem
Odin v3 will turn blue, not yellow
Click to expand...
Click to collapse
Hi Senman... Thanks... followed the procedure and I guess the phone is rooted, I can see the cwm , Super user app, Tweaks app. Anything you would recommend to make the phone faster and lagfree... Thanks again for all the support.

status 7 error

hello i've been trying 2 get a new rom for my brother's SGS+
but almost every rom i try (mostly jelly bean and ics roms but also some gb ones) give me n error
when i try 2 install them through recovery mode,
i get error status 7, installation aborted
now i looked for this problem on the internet and it appears there r some solutions found on this link:
http://www.knowtechbetter.com/how-t...ry-cwm-while-installing-flashing-custom-roms/
however i did not understand any of this
i m not new in installing roms and such but i m not very femilier with all these "more complicated" things
i noticed at the comments that the first solution helped someone
and it looks easy, if any1 could explain me shortly how do i do this this would be very helpful.
thanks~

Install newer CWM.. you have to ask this in the special thread made for it

broodplank1337 said:
Install newer CWM.. you have to ask this in the special thread made for it
Click to expand...
Click to collapse
i have faemod v1.2 based on cwm 5.0.2.7 ..
and honestly i dont know which threat you are reffering to

Cyanogenmod 10.. There is a link to CWM..
On the wiki page (see the index i made) you can also find CWM and an installation guide.

mrjraider said:
Cyanogenmod 10.. There is a link to CWM..
On the wiki page (see the index i made) you can also find CWM and an installation guide.
Click to expand...
Click to collapse
if u could help me just a little more, i cant find it.

Wiki link http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001

mrjraider said:
Wiki link http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
Click to expand...
Click to collapse
thanks i managed 2 install cwm 6
but i encountered a new problem.
i installed the non-touch verision and now i cant do the "select" option
it is supposed 2 be the power button but it doesnt work
so now i cant do anything..
also i tried rom manager but it just opens recovery mode for me
any way i can return to an old verision of recovery w/o using the reovery mode so i can go back and install the touch verision this time?

There are more buttons to use. If i can remember you need to use the menu button

mrjraider said:
There are more buttons to use. If i can remember you need to use the menu button
Click to expand...
Click to collapse
tried them all.. i am really stuck here
appearntly alot of ppl have this problem.
is there any way to install it through odin or some other app?

Via odin install CWM 5.5.0.4.. See the wikilink i provided.. This one is stable and the homebutton is the choose button.

mrjraider said:
Via odin install CWM 5.5.0.4.. See the wikilink i provided.. This one is stable and the homebutton is the choose button.
Click to expand...
Click to collapse
maybe im doing it wrong but odin doesnt even recognise the file.. and there is no guide there
i did try a odin flashable cwm V6 but its stuck on "setup connection" each time i try..

Le tips:
- Patientce
- Remove and replug device
- Reboot device
- Use another USB port or cable
- Turn kies of (ctrl+alt+del > Taskmanager > Procesess > Terminate anything with KIES in its name)
- Turn AW/FW off

Just flash TWRP and you're good to go
Sent from my GT-I9001 using xda app-developers app

mrjraider said:
Le tips:
- Patientce
- Remove and replug device
- Reboot device
- Use another USB port or cable
- Turn kies of (ctrl+alt+del > Taskmanager > Procesess > Terminate anything with KIES in its name)
- Turn AW/FW off
Click to expand...
Click to collapse
dude im fricking out..
i accidently soft bricked it and now im trying 2 flash it back 2 stock with odin through your guide
but odin recognises my pc recognises the ops file as a text file so odin doesnt even see it...
u gotta help me ;_;

hey man relax... in wiki page you'll find cwm5.5.0.4 flashable zip and you can install it from recovery ( even from stock recovery if i remember corectly)... if you can't acces your phone you can copy it from pc to phone using recovery ( mounts and storage )... if you are stuck in recovery( you're phone boot in recovery only ) you'll need to flash the bootloader using odin.. also you can find the steps and necessary files in wiki and in cm10 by ivendor in firrst post ..Good Luck !!!

1: How did you softbrick it? What did you do, because I thought Odin got stuck??
2: You do see an Phone an ! and a PC?
3: You do have the latest ROM by Samsung and the correct AriesVE.ops?
If yes then we can get started. Follow my guide, when odin gets stuck at System (for a long long time > You know this because the green balk with time gets stuck) unplug device, reboot download again, reboot computer, and try again with BroodROM RC5 (see index)... (BroodROM RC5 is a last resort for our device since it has fixed many softbricked one including mine)

mrjraider said:
1: How did you softbrick it? What did you do, because I thought Odin got stuck??
2: You do see an Phone an ! and a PC?
3: You do have the latest ROM by Samsung and the correct AriesVE.ops?
If yes then we can get started. Follow my guide, when odin gets stuck at System (for a long long time > You know this because the green balk with time gets stuck) unplug device, reboot download again, reboot computer, and try again with BroodROM RC5 (see index)... (BroodROM RC5 is a last resort for our device since it has fixed many softbricked one including mine)
Click to expand...
Click to collapse
see the problem?
http://i39.tinypic.com/amp1ch.png
the thing is even tho i read your guide it seem like im doing something wrong..
for instance when i add the files both ops and "one package" file it doesnt see them so i have to write their location

shahaf321 said:
dude im fricking out..
i accidently soft bricked it and now im trying 2 flash it back 2 stock with odin through your guide
but odin recognises my pc recognises the ops file as a text file so odin doesnt even see it...
u gotta help me ;_;
Click to expand...
Click to collapse
aaaand that's what happens when you start flashing random stuff to your phone without knowing what you actually do...
Ok, I wont tease you or anything, here is what to do:
READ THIS
THIS (all stuff from there, doesn't matter if you don't consider it necessary, you surely will in the future)
After you read all those and understand everything, flash back to stock using @mrjraider tutorial, it's a clear step by step one so follow every step.
Now, the thing is that you'll need CWM Recovery, not FeaMod which is only able to flash GB ROM's.
The most stable CWM recovery is CWM 5.5.0.4 you can find it at the bottom of the OT from this thread
HERE is how to flash CWM with Odin.
Please, pay attention and don't rush things up. And next time you have a problem post in an appropriate thread don't open a new one and especially not in the dev section, see this
Also, no user "gotta help you" you've chose to flash tings to your phone, if you mess it up, it's your own failure and nobody 'MUST' help you... (see this)

educk said:
aaaand that's what happens when you start flashing random stuff to your phone without knowing what you actually do...
Ok, I wont tease you or anything, here is what to do:
READ THIS
THIS (all stuff from there, doesn't matter if you don't consider it necessary, you surely will in the future)
After you read all those and understand everything, flash back to stock using @mrjraider tutorial, it's a clear step by step one so follow every step.
Now, the thing is that you'll need CWM Recovery, not FeaMod which is only able to flash GB ROM's.
The most stable CWM recovery is CWM 5.5.0.4 you can find it at the bottom of the OT from this thread
HERE is how to flash CWM with Odin.
Please, pay attention and don't rush things up. And next time you have a problem post in an appropriate thread don't open a new one and especially not in the dev section, see this
Also, no user "gotta help you" you've chose to flash tings to your phone, if you mess it up, it's your own failure and nobody 'MUST' help you... (see this)
Click to expand...
Click to collapse
i did try using his guide and i folowed it step by step
my only problem is that odin gives me that message i showed in my last post..
also untill i fix this soft brick i cant move on to recovery mode so
i need 2 fix that first..
the guide doesnt show anything related to what im doing wrong..

Someone with brains would have removed odin, and the ops file and redownloaded it again. Also save those on your desktop

[Q] Galaxy Ace - Download mode and stock rom doesn't work

I upgraded my Samsung Galaxy Ace s5830c to 4.2.2, run.
After I moved to 4.3 and also worked, but after changing some things in build.prop (Root Explorer), my phone stopped getting into Download mode, It is a gray screen forever. Now my phone is stopped ( Loop Infinite )
I can not do unroot: Installation Aborted.
When I try to change my android version (install zip from sd card), appear this: Installation Aborted
I did found the build.prop backup, and I can not go back to stock rom by odin, because as I said, the screen turns gray when I try to enter download mode.
Help me, will have to go back stock rom, downloading a backup. (My friend did it, but I did not think and do not know how to do)
Thanks, beautiful site admin

fernando15j said:
I upgraded my Samsung Galaxy Ace s5830c to 4.2.2, run.
After I moved to 4.3 and also worked, but after changing some things in build.prop (Root Explorer), my phone stopped getting into Download mode, It is a gray screen forever. Now my phone is stopped ( Loop Infinite )
I can not do unroot: Installation Aborted.
When I try to change my android version (install zip from sd card), appear this: Installation Aborted
I did found the build.prop backup, and I can not go back to stock rom by odin, because as I said, the screen turns gray when I try to enter download mode.
Help me, will have to go back stock rom, downloading a backup. (My friend did it, but I did not think and do not know how to do)
Thanks, beautiful site admin
Click to expand...
Click to collapse
Sadly you have bricked your phone. But @SuperMini has provided us with a rather simple guide on how to unbrick Samsung Galaxy Ace that should hopefully work on your phone too. Go through the entire thread and you will get to know all the possible solutions. Make sure to use your phone's own key combination to enter the download mode. Here is the link,
How to unbrick Samsung Galaxy Ace
Do post your result. Hope I helped

Thx bro
mahithm said:
Sadly you have bricked your phone. But @SuperMini has provided us with a rather simple guide on how to unbrick Samsung Galaxy Ace that should hopefully work on your phone too. Go through the entire thread and you will get to know all the possible solutions. Make sure to use your phone's own key combination to enter the download mode. Here is the link,
How to unbrick Samsung Galaxy Ace
Do post your result. Hope I helped
Click to expand...
Click to collapse
:victory: i said '' i can't enter in download mode'' ..... this link above needs the odin ( odin needs download mode ) but '-'
I said that happen a gray touch after press the download mode buttons, but already entered on download mode, altrought doesn't appear any image, already is the download mode. So i did this...
After open the Odin and add: pit, boot, phone, pda, csc.... i did wipe reset and wipe cache, then i removed the sd-card and chip
1- download mode buttons
2- volume up + to continue
3- Click in Start on Odin
When appeared Pass, done '-'... thx for tried help me, thx :victory: :laugh:

fernando15j said:
:victory: i said '' i can't enter in download mode'' ..... this link above needs the odin ( odin needs download mode ) but '-'
I said that happen a gray touch after press the download mode buttons, but already entered on download mode, altrought doesn't appear any image, already is the download mode. So i did this...
After open the Odin and add: pit, boot, phone, pda, csc.... i did wipe reset and wipe cache, then i removed the sd-card and chip
1- download mode buttons
2- volume up + to continue
3- Click in Start on Odin
When appeared Pass, done '-'... thx for tried help me, thx :victory: :laugh:
Click to expand...
Click to collapse
No problem! Glad I could help

mahithm said:
No problem! Glad I could help
Click to expand...
Click to collapse
ok then.. !! let me try this... but please tell me first...
i have Cooper_v1.0.OPS to call in OPS
then i have Latest firmware (downloaded from samsung website) for call in One package.. right?
he wrote "After open the Odin and add: pit, boot, phone, pda, csc.... i did wipe reset and wipe cache, then i removed the sd-card and chip"
so basically whats is Pit, boot, phone, pda, csc .... and where to download them all.. and why? need to know this time before do again amazing thing with my mobile....

info2shail2010 said:
ok then.. !! let me try this... but please tell me first...
i have Cooper_v1.0.OPS to call in OPS
then i have Latest firmware (downloaded from samsung website) for call in One package.. right?
he wrote "After open the Odin and add: pit, boot, phone, pda, csc.... i did wipe reset and wipe cache, then i removed the sd-card and chip"
so basically whats is Pit, boot, phone, pda, csc .... and where to download them all.. and why? need to know this time before do again amazing thing with my mobile....
Click to expand...
Click to collapse
You can continue with the installation using "One Package". According to @fernando15j, when he pressed the key combo, it was in Download Mode even though the downloading image was not displayed. If this doesn't work work either, then your last option will be USB Jig. You can use the following guide to make your own,
Need a Samsung USB Jig? Build Your Own
I hope you can unbrick your Samsung Galaxy Ace. Good Luck! Hope I helped

mahithm said:
You can continue with the installation using "One Package". According to @fernando15j, when he pressed the key combo, it was in Download Mode even though the downloading image was not displayed. If this doesn't work work either, then your last option will be USB Jig. You can use the following guide to make your own,
Need a Samsung USB Jig? Build Your Own
I hope you can unbrick your Samsung Galaxy Ace. Good Luck! Hope I helped
Click to expand...
Click to collapse
Nope.. all things failed..... i made 3 USB jigs... ( wasted 3 data cables ) ... but failed...
then i purchased a ready-made USB Jig from eBay... and tried but again failed....
now the situation is i cant access download mode... and even cant access Recovery mode...

info2shail2010 said:
Nope.. all things failed..... i made 3 USB jigs... ( wasted 3 data cables ) ... but failed...
then i purchased a ready-made USB Jig from eBay... and tried but again failed....
now the situation is i cant access download mode... and even cant access Recovery mode...
Click to expand...
Click to collapse
I'm so sorry to hear that. I suggested you that option because the user @Baracs was successful in forcing open his Ace's Download Mode using USB Jig. Here is the thread,
USB Jig for Ace
Guess it doesn't work sometimes

[Q&A] [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary

[Q&A] [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary
Q&A for [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Counter
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Counter. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Rooting GT-I9070
Wishing you a very Happy and progressive new year!!!
Hi Diego, please help me achieve rooting my phone..
pda i9070ddtes
phone i9070ddlf1
CSC Unknown
Region KST
But I from India and want to root this phone

jodha said:
Wishing you a very Happy and progressive new year!!!
Hi Diego, please help me achieve rooting my phone..
pda i9070ddtes
phone i9070ddlf1
CSC Unknown
Region KST
But I from India and want to root this phone
Click to expand...
Click to collapse
Its easy.....all you had to do was SEARCH !!
http://forum.xda-developers.com/showthread.php?t=2087424
EDIT: Flash the latest UBLPK (Argentina) Firmware, smoothest of all.via odin and then Root it with Shaan's Root package given in the above link.

rooting GT-I9070P
Hey, could you please help me root my phone
PDA: I9070PXXLF1
CSC: I9070PMOBLF1
region probably MOB (bought unlocked in Austria but originaly from A1)

REGION: ZTM (TIM Brasil) | PDA: I9070VJLD1 | CSC: I9070ZTMLD1
link ins't working, anybody got a mirror?

knurd said:
REGION: ZTM (TIM Brasil) | PDA: I9070VJLD1 | CSC: I9070ZTMLD1
link ins't working, anybody got a mirror?
Click to expand...
Click to collapse
which link /

DaksAnkit said:
which link /
Click to expand...
Click to collapse
http://bitshare.com/files/04xbtfk8/ROOTED_I9070VJLD1_I9070ZTMLD1.rar.html
impossible to download that, tried in every single browser

knurd said:
http://bitshare.com/files/04xbtfk8/ROOTED_I9070VJLD1_I9070ZTMLD1.rar.html
impossible to download that, tried in every single browser
Click to expand...
Click to collapse
yea . man seems like the file does not exist anymore, tell you what just root your latest firmware delete the bloatware / stock apps i think its pretty much the same .

DaksAnkit said:
yea . man seems like the file does not exist anymore, tell you what just root your latest firmware delete the bloatware / stock apps i think its pretty much the same .
Click to expand...
Click to collapse
The problem is that, i cant root it, my phone can't read sd card anymore, so I'm trying to root my device with odin, if I can at least change my recovery mode and read internal storage it would be great...

Root with odin , no sd card
knurd said:
The problem is that, i cant root it, my phone can't read sd card anymore, so I'm trying to root my device with odin, if I can at least change my recovery mode and read internal storage it would be great...
Click to expand...
Click to collapse
HERE : i think this will help you out , but be patience and use common sense when rooting also I AM JUST HERE TO HELP , so DO NOT BLAME ME IF YOU BRICK YOUR PHONE , BUT I CAN SAY THAT IF YOU FOLLOW STEPS YOU WON`T HAVE ANY TROUBLE,
DO DOWNLOAD ESSENTIALS BEFORE FOLLOWING STEPS, FIRTS READ ALL THEN MAKE YOU MIND HOW TO DO IT :
1: ORIGINAL FIRMWARE FROM HERE you will need it to extract original kernel after rooting, or if something goes wrong when rooting
2: SAMSUNG USB DRIVER FOR WIN/MAC.
Make sure that you have backup the data, apps and settings from your Samsung device such as SMS, MMS, Call Logs, Contacts, Images, Audios, Videos, Bookmarks, Wi-Fi, APN settings and MMS settings etc as this process is going to wipe every data from your device.
3. Check of security suites such as antivirus and firewall whether they are disabled on your Computer.
4. You need to turn on the Enable USB Debugging on your Samsung Galaxy S i9070. This can be done simply by following the path ‘Settings > Applications > Development > USB debugging’ and ticking the USB Debugging option box.
5. Please put your battery in charge and make sure that it was charged to at least 80%.
Advice: Before going to start the root process you must go to phone settings->click about phone and look for basedband version number. Note down that number in notepad and save it on the desktop.
Steps and Procedure for Rooting Samsung Galaxy S Advance I9070:
1. Download working ODIN FROM HERE AND Working root package only I9070 from attachement to PC.
2. Once you have downloaded the file, then you need to extract the zip file in the PC.
3. After extraction is done.
4. Launch the Odin application in the computer.
5. Turn off the device in order to enter into download mode. For that do like this press and hold the Volume Down + Home buttons together and Power On the device simultaneously. After 1 min you will get a download mode with green android robot image.
6. Connect your device to the Computer via USB data cable while Odin is open. Once your device get connected, ID:COM section turns yellow in colour. If it doesn’t than you need to reconnect your device.
7. In Odin tool you need to two select two files into their respective fields.
NOW YOU WIL ALSO BE NEEDING A PIT FILE , i have attached both version 8gb and 16 gb PIT FILE choose from there if 8gb then 8gb and vice-versa
8.Click PIT tab and then select the GT-I9070_EUR_XX_8G/16GB.pit file from the extracted folder.
Once you selected the file left side Re-partition filed will be tick marked automatically. So you need to uncheck it manually. For more idea see the below picture.
b) Click PDA section and then select the rootkernel.tar.md5.
c) You need to uncheck all other option except ‘Auto Reboot’ and ‘F Reset Time’.
Click on ‘Start’ button and wait for the process to get completed. The Samsung Galaxy S device will reboot automatically.
9. Now you must try to install Superuser and Busybox from Google Play Store . Once you installed both apps then your device will be rooted successfully. check using root checker app.
Time to switch back to stock original kernel basedband firmware version number. Because above we used kernel for rooting the device have some problems like sudden reboots and lags. So that you need to install exact kernel to the device again. BUT IF YOU DO NOT WANT TO DO ALL THAT , JUST INSTALL ANY CUSTOM ROM / CM11 /cm10 etc ,which has tuned own kernel you will not be needing any of this in the follwoing steps.
HERE READ THIS XDA FORUM TO EXTRACT YOUR ORIGINAL FIRMWARE KERNEL
AFTER THAT AGAIN FOLLOW STEPS
1. Run the Odin application again in the PC.
2.Turn off the device and Boot into Download mode. For that press and hold the Volume Down + Home buttons together and Power On the device.
3. Connect the device to PC via USB cable.
4. Click on PDA tab and select the file which you downloaded recently. I selected (YOURKERNEL).tar.md5 .
5. Click on Start and the process will be completed. The device will be reboot automatically.
That’s it your device is rooted perfectly without any problems. In case if you find any issues with above procedure comment here:good:
good luck

DaksAnkit said:
HERE : i think this will help you out , but be patience and use common sense when rooting also I AM JUST HERE TO HELP , so DO NOT BLAME ME IF YOU BRICK YOUR PHONE , BUT I CAN SAY THAT IF YOU FOLLOW STEPS YOU WON`T HAVE ANY TROUBLE,
DO DOWNLOAD ESSENTIALS BEFORE FOLLOWING STEPS, FIRTS READ ALL THEN MAKE YOU MIND HOW TO DO IT :
1: ORIGINAL FIRMWARE FROM HERE you will need it to extract original kernel after rooting, or if something goes wrong when rooting
2: SAMSUNG USB DRIVER FOR WIN/MAC.
Make sure that you have backup the data, apps and settings from your Samsung device such as SMS, MMS, Call Logs, Contacts, Images, Audios, Videos, Bookmarks, Wi-Fi, APN settings and MMS settings etc as this process is going to wipe every data from your device.
3. Check of security suites such as antivirus and firewall whether they are disabled on your Computer.
4. You need to turn on the Enable USB Debugging on your Samsung Galaxy S i9070. This can be done simply by following the path ‘Settings > Applications > Development > USB debugging’ and ticking the USB Debugging option box.
5. Please put your battery in charge and make sure that it was charged to at least 80%.
Advice: Before going to start the root process you must go to phone settings->click about phone and look for basedband version number. Note down that number in notepad and save it on the desktop.
Steps and Procedure for Rooting Samsung Galaxy S Advance I9070:
1. Download working ODIN FROM HERE AND Working root package only I9070 from attachement to PC.
2. Once you have downloaded the file, then you need to extract the zip file in the PC.
3. After extraction is done.
4. Launch the Odin application in the computer.
5. Turn off the device in order to enter into download mode. For that do like this press and hold the Volume Down + Home buttons together and Power On the device simultaneously. After 1 min you will get a download mode with green android robot image.
6. Connect your device to the Computer via USB data cable while Odin is open. Once your device get connected, ID:COM section turns yellow in colour. If it doesn’t than you need to reconnect your device.
7. In Odin tool you need to two select two files into their respective fields.
NOW YOU WIL ALSO BE NEEDING A PIT FILE , i have attached both version 8gb and 16 gb PIT FILE choose from there if 8gb then 8gb and vice-versa
8.Click PIT tab and then select the GT-I9070_EUR_XX_8G/16GB.pit file from the extracted folder.
Once you selected the file left side Re-partition filed will be tick marked automatically. So you need to uncheck it manually. For more idea see the below picture.
b) Click PDA section and then select the rootkernel.tar.md5.
c) You need to uncheck all other option except ‘Auto Reboot’ and ‘F Reset Time’.
Click on ‘Start’ button and wait for the process to get completed. The Samsung Galaxy S device will reboot automatically.
9. Now you must try to install Superuser and Busybox from Google Play Store . Once you installed both apps then your device will be rooted successfully. check using root checker app.
Time to switch back to stock original kernel basedband firmware version number. Because above we used kernel for rooting the device have some problems like sudden reboots and lags. So that you need to install exact kernel to the device again. BUT IF YOU DO NOT WANT TO DO ALL THAT , JUST INSTALL ANY CUSTOM ROM / CM11 /cm10 etc ,which has tuned own kernel you will not be needing any of this in the follwoing steps.
HERE READ THIS XDA FORUM TO EXTRACT YOUR ORIGINAL FIRMWARE KERNEL
AFTER THAT AGAIN FOLLOW STEPS
1. Run the Odin application again in the PC.
2.Turn off the device and Boot into Download mode. For that press and hold the Volume Down + Home buttons together and Power On the device.
3. Connect the device to PC via USB cable.
4. Click on PDA tab and select the file which you downloaded recently. I selected (YOURKERNEL).tar.md5 .
5. Click on Start and the process will be completed. The device will be reboot automatically.
That’s it your device is rooted perfectly without any problems. In case if you find any issues with above procedure comment here:good:
good luck
Click to expand...
Click to collapse
couldn't find PDA on Odin3 v3.10, i installed with Odin3 v1.87 and i got bootloop after step 8c

@knurd : in latest version PA is same as PDA , AND DID ODIN SHOWED SUCCESS after finishing installation of root kernel ?
if you getting boot loop just go to recovery ,clear/delete cache and reboot 99 out of 100 times it solves bootloop.

DaksAnkit said:
@knurd : in latest version PA is same as PDA , AND DID ODIN SHOWED SUCCESS after finishing installation of root kernel ?
if you getting boot loop just go to recovery ,clear/delete cache and reboot 99 out of 100 times it solves bootloop.
Click to expand...
Click to collapse
yes, success...
i did the instalation with odin and still with boot loop, and the sad part is, i can't get into recovery...

knurd said:
yes, success...
i did the instalation with odin and still with boot loop, and the sad part is, i can't get into recovery...
Click to expand...
Click to collapse
oh man , flash the stock ROM in download mode , and post steps by step how u tried to flash root.kernel,
i think some more experienced person would be able to help you i am too semi-noob here ! I have no idea why i didn`t worked.
to root you can try this method .
YOU CAN TRY ROOTING BY APP ROOTGENIUS
good luck :good: