Hi!
Welcome to f4ktion kernel, this kernel is based on the arco68's one and it works on Stock Samsung ROMs
Features over Stock one
- Linux Kernel 3.4.78
- BLN
- USB OTG support
- Overclock (OC) up to 2GHz
- Underclock (UC)
- Voltage Control (VC)
- Compiled with Linaro 4.7.3
- Insecure
- init.d support
- Governor: Lionheart
- Governor: SmartASSV2
- Governor: SmartASSH3
- Governor: Wheatley
- I/O Scheduler: ROW
- I/O Scheduler: BFQ
- I/O Scheduler: Simple IO
- I/O Scheduler: V(R)
- I/O Scheduler: Zen
- FauxSound 3.1
- USB Fastcharge
- Asynchronous Fsync
- Dynamic Fsync
- Dynamic management of dirty page writebacks
Notice
- Flash it your on own risk, I don't take the responsibility for anything
For kernel configurations check second post
Download:
ML1
GT-I9195
f4ktion_1.3.0-eur_lte-ML1
Changelog
1.3.0 (03/02/2014)
- Added init.d support
- cpufreq: some optimizations and fixes.
- Upstream Linux Kernel to 3.4.78
- BLN: removed white spaces in code.
- sched: enabled ARCH POWER.
- Enabled kernel NEON mode.
- Added support on ramdisk to auto-mount drives as USBDISK
- Added USB OTG support, you'll need USB OTG Y cable, devices has to be externally powered. (thanks to sekil)
- Synced with a lot of AOSP/CM patches
- Updated wlan Prima driver 3.2.7.23
Credits: (Alphabetical order)
arco68 (Big thanks for supporting S4 Mini)
Christopher83
CM team
faux123
junkyde
ktoonsez
proxuser
Stratosk
F4ktion Kernel Configs
About fastcharge:
For fastcharge voltage configuration use this through terminal or console or you can use FauxClock app.
Code:
For USB 2.0 use 500mA as MAX
echo 500 > /sys/kernel/fast_charge/fast_charge_level
For USB 3.0 use 900mA as MAX
echo 900 > /sys/kernel/fast_charge/fast_charge_level
For wallcharger use from 900mA up to charger maximum (1500mA as top)
Warning: incorrect use of voltage could damage your phone or USB ports
About hardlimit:
Hardlimit will limit max frequency to stock, I added a simple init.d script for apply changes on boot, using 1.728 Ghz as default.
If you don't use OC, max frequency never will go above of default frequency (1.728 Ghz)
If you use OC, you need to edit 90hardlimit script or use one of the attached zip files to flash after you flash f4ktion kernel.
Code:
1836000
1890000
1944000
1998000
2052000
Then reboot, and choose your OC frequency as usual.
For use mm Dynamic management of dirty page writebacks or Dynamic Fsync you can use PerformanceControl app compiled by myself, credits to h0rn3t
Reserved for future use.
Hello !!!
Thanks a lot I will try now
Sent from my GT-N5110 using xda premium
Great work! :good:
Is the USB OTG support the same as here? http://forum.xda-developers.com/showthread.php?t=2613232
If you want to return to the ORIGINAL kernel as I do?
Thanks!!
Enviado desde mi GT-I9195 mediante Tapatalk
Mitko said:
Great work! :good:
Is the USB OTG support the same as here? http://forum.xda-developers.com/showthread.php?t=2613232
Click to expand...
Click to collapse
Indeed
D-Mak said:
If you want to return to the ORIGINAL kernel as I do?
Thanks!!
Enviado desde mi GT-I9195 mediante Tapatalk
Click to expand...
Click to collapse
Do you have original boot.img?
I do not.
Enviado desde mi GT-I9195 mediante Tapatalk
this kernel has the Knox bootloader inactive?
For best battery usage which combination of governor/scheduler?thanks in advanced!
Sent from my GT-I9195 using Tapatalk
Phone gets frozen in launcher after install it, also seems that touchscreen isn't working because of the lag
campeone said:
For best battery usage which combination of governor/scheduler?thanks in advanced!
Sent from my GT-I9195 using Tapatalk
Click to expand...
Click to collapse
You can try Interactive/ROW
Oliver94 said:
Phone gets frozen in launcher after install it, also seems that touchscreen isn't working because of the lag
Click to expand...
Click to collapse
Are you on ML1 ROM?
F4k said:
Are you on ML1 ROM?
Click to expand...
Click to collapse
What does it mean?
Im on ml1 but i havent flashed it yet but thanks for the info
Sent from my GT-I9195 using Tapatalk
Oliver94 said:
What does it mean?
Click to expand...
Click to collapse
That this kernel have to work fine on a ML1 ROM, if you use on other ROMs possibly will not work at all 'cause ramdisk maybe will differ
@F4k i'm sorry, but flash this kernel will Void Knox Warranty 0x1 ?
FastGas said:
@F4k i'm sorry, but flash this kernel will Void Knox Warranty 0x1 ?
Click to expand...
Click to collapse
If you have Knox bootloader yes
Sent from my GT-I9190
Thank you very very much @F4k
I'm on a deodexed ML1 rom with your kernel and with your new performance app and i unbeliveable happy! Phone is extrem lagfree with interactive/row settings. Battery is perfect!
Good work bro!
Bravo!!!
Tapatalk-kal küldve az én GT-I9195-el
On the 1.2.5 stock ML1 test release on the AOSP kernel thread I had problems with wifi not working after I flash it. It's resolved now?
blake2893 said:
On the 1.2.5 stock ML1 test release on the AOSP kernel thread I had problems with wifi not working after I flash it. It's resolved now?
Click to expand...
Click to collapse
AFAIK wifi it's working fine.
Related
"Since so many people were asking me for it, I've decided to share it with you guys."
"Disclaimer: I will only update this kernel when I have the time. So do not ask for ETA please."
Before installing this, please take your time to read the Original OP. in stratosk thread
This kernel contains every features that the Semaphore Kernel offers but with some additional custom features.
Features
- Linux kernel 3.0.69
- LiveOC
- Custom Voltage
- Voodoo Sound
- BLN & CM LED
- 384MB - 409MB available RAM
- Compiled with Linaro 4.7.3
- O3 optimization
- Auto brightness driver
- Touch Wake
- Vibration intensity
- Deep Idle
- USB host driver
- Governor ondemand (default)
- ondemand: sampling_down_factor tunable by momentum, smooth_ui
- Governor conservative (module, smooth_ui)
- Governor smartassV2 (module, smooth_ui)
- Governor interactive (module)
- Noop I/O scheduler (default)
- Deadline I/O Scheduler (module)
- Simple I/O Scheduler (module)
- ROW I/O Scheduler (module)
- CFQ Scheduler (module)
- CIFS as module
- TUN as module
- Logcat disabled (as module only)
- Standard network packet scheduler
- Kernel log buffer size 4KB (from 128KB)
- Reduced debug info
- TinyRCU
- Fast Charge
- WiFi PM_MAX when suspend
- CWM: AROMA Filemanager
- /system/etc/init.d directory creation if not exist
Custom Features
Swap/Zram enabled
Normal OC'd over LiveOC
1.1 - 1.4GHz
In-call Volume Hack
Voodoo Color
Entropy Tweaks
Load_freq(4*HZ+61) to avoid Loadavg Moire
arm/crypto: Add optimized AES and SHA1 routines
Backport AIO (Asynchronous IO) from Linux 3.5
Zen IO Scheduler
BFQ IO Scheduler
IntelliDemand CPU Governor
Lulzactive CPU Governor
Wheatley CPU Governor
UKSM 0.1.2.2
Plus more features to come in near future....
By installing this, you'll receive no support from Stratosk because;
This is an Unofficial Semaphore Kernel
Stratosk does not support it
So do not bug him if you have a problem with this kernel. But bug me instead!
If you guys want to see some more features added to this, feel free to tell me and I'll try my best to add them to it.
Change log
Please note that there are 3 variations:
Normal versions: for CM10 or ROMs without hugemem configuration, available RAM 384MB - 396MB
"s" versions: for Slim Bean ROM or patched ROMs with hugemem configuration, available RAM 397MB - 409MB
"vc" versions: is Voodoo Color Mod
Everything is the same as the original kernel except with few changes.
added a zram script below in a zip file. IT IS NOT FLASHABLE EXTRACT AND MANUALY PUSH AND SET PERMISIONS. push to
system/etc/init.d if you want diffrent sizes pm me of post on this thread. each has 20% swapiness for now if you want more tell me here
enter this hitting enter after each line
adb root
adb remount
adb push <file> /system/etc/init.d/<file>
adb shell
su
chmod 755 /system/etc/init.d/<file>
reboot
all I did was compile this kernel for vibrant i take almost no credit for it
credits go to
stratosk: http://forum.xda-developers.com/member.php?u=3750240 he is the maker of original semaphore kernel
and Nick0703: http://forum.xda-developers.com/member.php?u=3443526 he is the guy from captivate forums who added the extras
as these guys did everything but build the modified version for vibrant. if you want to use in your rom pm me and il problebly say yes. and be sure to give credits to stratosk and nick0703
Uhm you should probably quote these lines, "
Nick0703 said:
Since so many people were asking me for it, I've decided to share it with you guys.
Disclaimer: I will only update this kernel when I have the time. So do not ask for ETA please.
Click to expand...
Click to collapse
As that was a response to the captivate community.
Sent from my SGH-I897 using xda app-developers app
Sent from my SGH-T959 using xda premium
Would love to see this kernel on the fascinate. I've attempted to port over the original kernel from source but I must suck. Lol
cannondaleV2000 said:
O yeah. Totaly forgot
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
Gosh man get it together! Have you tried it out with test I sent you to see how it was working? Or was it bugging out because I built the kernel with original semaphore and not yours?
Sent from my GT-i9000 using xda app-developers app
new build
new build up for vibrant il post change log tomorrow. no problems
Hey man, can you also port the "s" version of this kernel, for the slim ROM for greater memory
Thanks for your work
This is the s version. Woth voodoo color too
Sent from my SGH-T959 using xda premium
cannondaleV2000 said:
This is the s version. Woth voodoo color too
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
Ah, oh, OK... just noticed... Sorry.
I think it would be great -though- if it's also reflected on the thread's title , I.e. 2.9.20sv, instead of 2.9.20v...
cannondaleV2000
You mention that:
Please note that there are 3 variations
Click to expand...
Click to collapse
I only see an attached file Unofficial_Semaphore_JB_2.9.20s_vc_v
Is this file for all three variations? I only need a kernel for Normal versions: for CM10 or ROMs without hugemem configuration.
Thank you very much for the additional features.
Sorry forgot the other 3 Gina add them tonight when I update source
Sent from my SGH-T959 using xda premium
new build
hey sorry if you used the build i did lastnight and got bootloops but im just about to upload a updated one heres the change log expect the new one up in about a half hour.
change log
Quote:
2.9.21c
- Linux kernel 3.0.72
- binder: backport from 3.9-rc (also port some other changes to support this)
- lowmemorykiller: updates from 3.9-rc
- logger: updates from 3.9-rc
- disable android_ram_console (thanks to dark_knight35)
- mDNIe: suppress some debug messages (and do so minor cleanup)
- Auto brightness: calculate the average of light sensor adc values instead of normalized brightness
- Auto brightness: Intoduce max_br_threshold tunable. Over this, the brightness is updated to its max value (thanks to Necromancer3)
- Lowmemorykiller: Intoduce a white list with PIDs (up to 6) that never been killed (use: echo "PID1, PID2" > /sys/module/lowmemorykiller/parameters/w_list)
- CWM 6.0.3.0
- built with Linaro 4.7.3 201303
- add option to Semaphore Auto Brightness for parabolic function (echo 0 > /sys/devices/virtual/misc/sema_autobr/linear)
New Feature:
- Added frandom (much faster random number generator)
download will be in op in about 30 minutes
Bad upload? Two attachments are much smaller.
lbw321 said:
Bad upload? Two attachments are much smaller.
Click to expand...
Click to collapse
Yeah those two attachments are bad. Op needs to recompile them.
Sent from my SGH-I897 using xda app-developers app
sorry
Nick0703 said:
Yeah those two attachments are bad. Op needs to recompile them.
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
re compiling now
testing now
alright guys im testing new builds now again. and il upload this afternoon after school. yes i have school if i get a chance to upload from my phone later before i get home i will
cannondaleV2000
Installed Unofficial_Semaphore_JB_2.9.21v, I am assuming that this is the newly uploaded built. Right after entering the OS, my phone rebooted into the recovery. This might have been caused by kernel choosing 1400hz frequency. Now the frequency is set to 100 - 1000 and so far your kernel works good. I will keep you posted if I notice any irregularities.
Is it ok to use Semaphore Manager with your kernel or should we use CM10 built in OC features?
I installed Voodoo sound app but I can't see voodoo color option at the bottom. Am I doing something wrong?
Thank you so much for your hard work with extra features!
Yeah you can use the semaphore app. Or cm performance settings or any tools for controlling CPU that you want. I recommend set CPU. Worth paying a little bit
Sent from my SGH-T959 using xda app-developers app
On my phone your kernel seems to work fine, however I tried to install this kernel to my friend's phone and it caused vicious bootloop. I had to resort to ODIN to be able to make the phone work again. I tried this twice and both times kernel caused bootloop.
Both I and my friend have exactly the same CM 10.1 built. Just very strange.
Also I sill don't know how to access voodoo color. Zram and KSM seem to be missing from the performance menu.
Perhaps anyone else can confirm my findings.
fixing now
Orochi77 said:
On my phone your kernel seems to work fine, however I tried to install this kernel to my friend's phone and it caused vicious bootloop. I had to resort to ODIN to be able to make the phone work again. I tried this twice and both times kernel caused bootloop.
Both I and my friend have exactly the same CM 10.1 built. Just very strange.
Also I sill don't know how to access voodoo color. Zram and KSM seem to be missing from the performance menu.
Perhaps anyone else can confirm my findings.
Click to expand...
Click to collapse
i know there are some problems. im waiting for a reply from the dev whos source i use than il fix it
Hey guys
As you already might have read in either the CM11 dev thread or the Q&A section, I am working on a custom kernel for our T210(R) and T211. It's still in a pretty early stage, but the current build is fully stable, so I thought why not share it
As I'm pretty new to this community, a few words about myself: My (only) device I have been working on is the LG Optimus 4x HD, for which I also made a custom kernel (also named werewolf kernel, who would have thought of that ). Me and 2 other fellow RDs were able to "switch" many blobs with the ones from grouper, which fixed many, many issues we were facing in 4.4 with the stock 4.1 blobs. I am the official maintainer of namelessROM and vanir for the 4x HD, and am also compiling GummyROM, LegoROM, unofficial CM 11 (using grouper blobs) and SlimKat for the 4x HD on a nightly base. And as soon as we have a proper device tree for our tab, I'm sure I can port the Tab3 to all those ROMs
Now, enough chit chatting, let's talk about the kernel
It's based on @ketut.kumajaya's blackhawk kernel (thanks again, mate ) From v004 on we are based on official KitKat sources, with some additions such as:
Features:
Various network tweaks
Entropy tweaks
I/O speed improvements
cortex a9 and neon omtimizations
Added frandom
Tweaked vm dirty ratios
Dynamic read-ahead values
Added I/O schedulers: ROW, SIO, BFQ, FIOPS, V(R)
Optimized AES and SHA1 routines
Added CPU governors: Lionheart, Adaptive, Intellidemand, Hotplug, Hyper
Reduced RAM usage from logger
Updated lowmemkiller
Overclocked to 1.420 GHz by default
Disabled vsync for better 2D performance
Overclocked GPU up to 624MHz (default 416MHz)
Custom user voltage control (CPU)
Undervolted by default (-25mV)
S2W and DT2W (WIP)
Fast Charging
KSM
Bugs:
You tell me!
Installation:
Download the kernel from HERE
Reboot into recovery (recommended to make a nandroid)
Flash the kernel zip
Recommended to wipe /cache
Reboot and enjoy!
And remember to remove phservice if you want to change some CPU/GPU settings yourself
Notes:
See 2nd post
GPL:
Kernel sources
Kernel Modules (only for v001 - v003)
Used defconfig
Used build script
Thanks:
@ketut.kumajaya for the initial kernel base
@gr8nole for general help, info and testing
XDA:DevDB Information
Werewolf kernel SM-T210/T211, Kernel for the Samsung Galaxy Tab 3
Contributors
laufersteppenwolf
Kernel Special Features: Tuned for best possible performance
Version Information
Status: Stable
Created 2014-07-21
Last Updated 2015-05-25
Tweaks and other stuff
Since v002, we have an updated lowmemorykiller. It behaves a bit snappier than the old one, also with the default minfree values. However, in case you like to tweak your device a bit to make it even more snappy (like me ), I tweaked the minfree values a bit to slightly increase the free RAM without really affecting the multitasking experience. The script can be found in the attachment. All you need to do is to extract the script and place it in your /system/etc/init.d/ folder and that's it. The values will be automatically set on boot.
UV interface
The min possible voltage is 1000mV for now, and the max one is 1400mV. If you want me to lower the min voltage, please let me know.
Also, please note, that the voltage has to be changed in 12.5mV steps. If you apply for example 1110mV, it will be rounded down to 1100mV.
Fast Charge interface
The main interface is inside /sys/kernel/fast_charge/*
/sys/kernel/fast_charge/force_fast_charge (rw)
0 - disabled (default)
1 - use custom mA configured through the sysfs interface (see below)
/sys/kernel/fast_charge/ac_charge_level (rw)
rate at which to charge when on AC (1.8A to 2.3A)
/sys/kernel/fast_charge/usb_charge_level (rw)
rate at which to charge when on USB (0.5A to 1.0A)
/sys/kernel/fast_charge/failsafe (rw)
0 - disabled - allow anything up to 2.3A to be used as AC / USB custom current (USE WITH CAUTION!)
1 - enabled - behaviour as described above (default)
/sys/kernel/fast_charge/version (ro)
display fast charge version information
New kmsg layout
From v008 onwards the kmsg looks a tiny bit different. Instead of displaying the time since boot, it logs the actual time and date.
Now, you may ask yourself: "does that any good?" Sure it does. When you encounter an issue and grab a log, you can send it my way saying "the issue happened at 15:35". It is way harder to find out the exact time (in seconds) since the device booted, right?
When changing the CPU gov, you might want to keep THIS (4.1) or THIS (4.4) in mind
Changelog:
v008 [15/02/15]
- Disabled zcache
- Added KSM (including deferred timer to save battery)
- Tweaked zRAM
- New kmsg log layout (see 2nd post for more details)
- Fixed kernel version in settings
- Disabled S2W and DT2W by default
When you flash this version, please wipe cache, otherwise bad things could happen
v007 [08/12/04] RIP Beth
- Slightly more RAM from logger
- S2W and DT2W (Still WIP)
- Decreased min possible CPU voltage to 800mV
- Undervolted by default (-25mV)
- Fast Charge support
v006 [01/11/14] MOAH CPU
- Added CPU UV interface
- OC'ed further to 1420MHz
- Max GPU freq limited to 624MHz until all issues are resolved
- Fixed init.d support on T211
v005a Minor fix
- Fixed DeviceControl GPU support
- Output all GPU freqs in Hz instead of KHz
v005 [18/10/2014] SM-T211 support
- Added support for the T211 variant (thanks to @sscsps for testing)
- Merged latest Sammy updates
- Enabled I/O accounting (only needed for devs)
- zcache enabled by default
- GPU OC up to 624MHz (default is 416MHz)
v004 [25/09/2014] Android 4.4 support
- Re-based on latest KitKat sources
- Re-added almost all features from v003
- Removed 156MHz freq step (causing trouble for still unknown reasons)
- Overclocked to 1.344 GHz (instead of 1.205GHz)
- Disabled vsync for better 2D performance
- Disabled "reboot recovery" to avoid being stuck in recovery on old recoveries (special version)
v003 [31/08/2014]
- new govs: Hotplug, Hyper
- new freq step @ 156MHz
v002 [25/07/2014]
- reduced RAM usage from logger
- new/updated lowmemkiller (see attachment in 2nd post for init.d script with tweaked minfree values)
v001 [18/07/2014]
- initial release
good work you link where ? and nice job workıng 4.1.2 ???? 4.2.2 .4.4.2 kernel android version what? @safariking [MENTION=3034891]gr8nole[/MENTION
not working dont flash ı using ultimate rom safarinking by 4.1.2 soft brick device
Not working yet hope you get it working good luck
Sent from my SPH-L720 using XDA Premium 4 mobile app
sorry guys, I just found the issue... my last commit breaks the GPU module so it doesn't compile, doesn't get copied over into the zip and so does not get replaced on your system, but the new kernel cannot load the stock module as I used another defconfig name...
Will be fixed ASAP
EDIT: Fixed and uploaded
laufersteppenwolf said:
sorry guys, I just found the issue... my last commit breaks the GPU module so it doesn't compile, doesn't get copied over into the zip and so does not get replaced on your system, but the new kernel cannot load the stock module as I used another defconfig name...
Will be fixed ASAP
EDIT: Fixed and uploaded
Click to expand...
Click to collapse
Nice work. This kernel works. Will monitor battery life and game performance.
Sent from my SM-T210R using XDA Free mobile app
laufersteppenwolf said:
When changing the CPU gov, you might want to keep THIS in mind
Click to expand...
Click to collapse
is there anyway to flash it on tab 3 t211 kk 4.4.2 firmware
big job thank can you add overclock gpu ? downclock?
gr9nole said:
big job thank can you add overclock gpu ? downclock?
Click to expand...
Click to collapse
You can check if there is OC available by installing "No-Frills CPU Control" from the google play store
a question about toolchain
@laufersteppenwolf
hi, i would like to know which toolchain you used to build this kernel, a direct link to it would be helpful.
also, using the supplied defconfig can i make [defconfig] and then make -j# or are there additional things to do?
i build kernel for tab3 10 fine but setting up my system for sm-t210 is proving stubborn. there is another project going on
that i would like to learn from and help with, your help would be appreciated.
thank you for reading.
m
Anil Shovo said:
is there anyway to flash it on tab 3 t211 kk 4.4.2 firmware
Click to expand...
Click to collapse
I do not think so, as I'm using the ramdisk from t210, which most likely isn't compatible with t211, and sure not with 4.4.2
gr9nole said:
big job thank can you add overclock gpu ? downclock?
Click to expand...
Click to collapse
step by step
moonbutt74 said:
@laufersteppenwolf
hi, i would like to know which toolchain you used to build this kernel, a direct link to it would be helpful.
also, using the supplied defconfig can i make [defconfig] and then make -j# or are there additional things to do?
i build kernel for tab3 10 fine but setting up my system for sm-t210 is proving stubborn. there is another project going on
that i would like to learn from and help with, your help would be appreciated.
thank you for reading.
m
Click to expand...
Click to collapse
for this build, I used CM's 4.6 toolchain, but that'll change soon
I will also push the build script and modules to github ASAP, so just wait for that, as setting up the modules and stuff isn't the most pleasant thing to do
Werewolf is not playing lol so what your saying is that we will be having cm 11 and aosp all the good stuff soon ?
Sent from my SM-T210 using XDA Premium 4 mobile app
I've used this kernel for 2 days. I have noticed the screen flickers on the 2nd day and while watching a movie (while plugged in) the tab was battery drained battery was 30% when I started watching. Can others confirm this?
Goodside. Battery life is enhanced and performance is the same. Nice work on this
Sent from my SM-T210R using XDA Free mobile app
trazfer said:
I've used this kernel for 2 days. I have noticed the screen flickers on the 2nd day and while watching a movie (while plugged in) the tab was battery drained battery was 30% when I started watching. Can others confirm this?
Goodside. Battery life is enhanced and performance is the same. Nice work on this
Sent from my SM-T210R using XDA Free mobile app
Click to expand...
Click to collapse
I was experiencing the exact same flickering myself as well, but on stock kernel
This flickering isn't kernel related, but ROM related. Sammy must have screwed up the auto backlight handling, as it only happens at some certain brightness values
No ir blaster
Edit: This is what I get when I open peel smart remote
laufersteppenwolf said:
I was experiencing the exact same flickering myself as well, but on stock kernel
This flickering isn't kernel related, but ROM related. Sammy must have screwed up the auto backlight handling, as it only happens at some certain brightness values
Click to expand...
Click to collapse
He is tottaly right, also sometimes when you are using this tab, the screen locks by itself
Ripshock said:
No ir blaster
Edit: This is what I get when I open peel smart remote
Click to expand...
Click to collapse
Check your build.prop to see what the ro.build.product shows.
gr8nole said:
Check your build.prop to see what the ro.build.product shows.
Click to expand...
Click to collapse
I am using stockrom series with a build for sm-t210 but I have used device spoofer and spoofed my original build sm-t210r
Ripshock said:
I am using stockrom series with a build for sm-t210 but I have used device spoofer and spoofed my original build sm-t210r
Click to expand...
Click to collapse
It works for me with the stock firmware/rom with this kernel.
Hellow!
This kernel works only on stock and some custom KItKat 4.4.2 TouchWiz ROMs for Samsung Galaxy S4 mini I9190/I9195/I9192 variants!
Features:
Based on last official kernel source for GT-I9195 (used SilviuMik's branch)
Synced with E370KKTU2BOD2 kernel source (KK 4.4.4 kernel for SHV-E370K variant of Galaxy S4 Mini LTE (announced only for Korea))
CPU Overclock (OC): up to 2052MHz
CPU Underclock (UC) down to 81MHz
GPU Overclock up to 627MHz
CPU Voltage Control (VC)
Hotplug thread infrastructure
Faux123's Intelliplug
MyFluxi MSM-hotplug new
Alucard-hotplug new
Lazy-hotplug new
Gamma control
Faux123's GPL Sound Control 2.1
Sweep2Sleep
Fast charge
Upgraded taus88 to taus113 algorithm for entropy generator
Added and realy used frandom (fast random number generator)
Krait optimized strcmp and memcmp
Motorola MSM memcopy enhancements (memutils) to improve of the memory subsystem performance
CPU-boost new
Quickwakeup new
KSM (Kernel SamePage Merging)
Timer slack controller
Speedup late resume patch for faster wakeup of the device
F2FS support
NTFS support with full read/write access
init.d support
Updated exFAT module to v1.2.12
LZ4 compressor for zSwap new
TCP-cong: westwood, vegas, reno and etc.new
Set SELinux always into "Permissive mode"
Pre-installed bosybox (placed in /sbin folder)
Compiled with Linaro GCC 4.9.4-2015.06 Toolchain
Additional Governors:
Impulse
[*]Intelliminmax
[*]Intelliactive
[*]Lionheart
[*]Ondemandplus
[*]Smartmax
[*]Preservative
[*]Wheatly
[*]Intellidemand new
[*]Alugard new
[*]Slim new
Additional I/O Schedulers:
FIOPS (Fair Input/Output Per Second)
[*]SIO (Simple I/O)
Credits:
@arco68
@Christopher83
@F4k
@junkyde
@SilviuMik
@GrarakInstallation instructions:
for ODIN:
1. Extract XXXX-ALX-x.x.x.md5 from XXXX-ALX-x.x.x.tar.zip
2. Flash with ODIN XXXX-ALX-x.x.x.md5 file
for CWM:
1. Copy XXXX-ALX-x.x.x.zip (without tar) to your sdcard
2. Reboot into CWM recovery
3. Choose "Install zip from sdcard"
4. Select XXXX-ALX-x.x.x.zip kernel and confirm installation.
Download:
Link1
Link2
XDA:DevDB Information
Custom TouchWiz KK4.4.2 Kernel for I9190/I9195/I9192, Kernel for the Samsung Galaxy S 4 Mini
Contributors
alexax66
Source Code: https://github.com/alexax66/KitKat_kernel_samsung_msm8930-common
Kernel Special Features: CPU and GPU Overclocking, CPU Underclocking, CPU Voltage Control, Advanced CPU hotplugs, Gamma control, Faux123's Sound Control, Sweep2Sleep, Additional Governors and I/O Schedulers, KSM, F2FS, NTFS, Timer Slack Controller, Fast charge
Version Information
Status: Stable
Current Stable Version: ALX-0.1.2
Stable Release Date: 2015-11-15
Current Beta Version: ALX-0.1.3
Beta Release Date: 2015-12-30
Created 2015-08-15
Last Updated 2015-11-18
How to use kernel features
- for CPU, GPU, Hotplug and Gamma Control tunings use Kernel Auditor by Grarak
- for Faux123's Sound Control tuning use FauxSound Audio/Sound Control
- set of some features for switching through a parameters of the build.prop:
For all kernel version:
- to enable Sweep2Sleep:
Code:
ro.config.sweep2sleep=true
- to enable init.d support add in build.prop:
Code:
ro.config.sysinit=true
Only for ALX-0.1.0 and later:
- to enable KSM:
Code:
ro.config.ksm=true
Only for ALX-0.1.1 and later:
-to enable Adaptive LMK:
Code:
ro.config.adaptive_lmk=true
Read about how adjust LowMemoryKiller with management of not killable processesin
Only for ALX-0.1.2 and later:
Use only one of this hotplugs!
-to set Alugard-hotplug as default:
Code:
ro.config.alucardplug=true
-to set MyFluxi MSM-hotplug as default:
Code:
ro.config.msm-hotplug=true
-to set Intelli-hotplug as default:
Code:
ro.config.intelliplug=true
-to set Lazy-hotplug as default:
Code:
ro.config.lazyplug=true
Chaneglog:
ALX-0.1.0
ALX-0.1.1
ALX-0.1.2-Release
ALX-0.1.3
Full Changelog
Kernel tested by me over month, all :good:
---------- Post added at 09:23 AM ---------- Previous post was at 09:10 AM ----------
One thing, gamma control work only in device control app, and after reboot is set by default, maybe in future is will be fixed
can i use with ploiki's rom?
00ehsan00 said:
can i use with ploiki's rom?
Click to expand...
Click to collapse
I not test this kernel in ploiki's rom, but i think that it work without any problems.
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
o0chtm0o said:
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
Click to expand...
Click to collapse
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
P.S.
By the way, he not use stock, he use CM, and he did it for us just because he good man :good:
denon480 said:
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
Click to expand...
Click to collapse
Wow! It's INCREDIBLE!! I have no words. I hope it's not the first and last work, I hope OP can continue with this project. It's amazing! I was waiting for this since loooooong time ago, losing any hopes
o0chtm0o said:
Wow! It's INCREDIBLE!! I hace no words. I hope it's not the first and last work, I tope OP can continúe with this project. It's amazing! I was waiting forma this since loooooong time loosing any hopes
Click to expand...
Click to collapse
not first and not last)))
Soon, OTG and maybe ext4 support
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
00ehsan00 said:
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
Click to expand...
Click to collapse
We test some new patches bln, dosent work
add in build.prop
ro.config.sweep2sleep=true
reboot
swipe on the bottom screen from left to right, is lock the phone
Tested new kernel with memory patches.
Just for info, work on kernel dont stop
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
petrevirgil said:
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
Click to expand...
Click to collapse
I personally like ondemand/cfq I find it makes things that tiny bit more responsive like 1080p video recording and scrolling thru my Google Keep widget. Ondemand for me gives some of the best battery.
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Will this work on I9192?
Loulou-13 said:
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Click to expand...
Click to collapse
I'm currently using this with N5 four mini rom, works so awesome, incredible battery life, there is just one problem though, private mode does not work with this kernel, but they said its because of the rom not fully compatible with the kernel., i don't know if this works fine with s6 port 5.1, havent tried yet.
Can I use with S6 Mini Port Rom
alexax66
sajid0786 said:
Can I use with S6 Mini Port Rom
alexax66
Click to expand...
Click to collapse
Yes, you can use this variant
KaminariKernel
Code:
#include "std_disclaimer.h"
/*
* Your already voided warranty is now void again.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh my *** off at you.
* Really hard.
*/
Hiya fellas.
This is my modded kernel for our loved Moto G 1st gen (LTE version). I decided to resume developing it since I realized I was wrong (I thought no one was interested in it). So here we are again.
Features:
Sources & Optimizations
- Based on Motorola's shared falcon/peregrine source
- Compiled with generic Linaro 5.3 toolchain
- Compiled with -O3 optimization & some more flags (e.g. Pipe flag)
- Optimized ARM RWSEM & Square Root algorithms
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Hotplugging Drivers
- Ye Olde MPDecision
- AutoSMP
Click to expand...
Click to collapse
Extra CPU Governors
- Bioshock
- Dancedance
- Impulse
- Lionheart
- Smartmax
- Yankactive
- Yankdemand
- Zzmoove
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Vr
- Zen (Default)
Click to expand...
Click to collapse
Sound
- Faux's Sound Control
- Headset High Performance Mode
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w
- State Notifier driver
- Adreno Idler
- GPU overclock & underclock (533MHz/100MHz)
Click to expand...
Click to collapse
Extra Sh*t
- USB Fast Charge
- Disabled gentle fair sleepers
- Extra TCP Congestion Controllers
- HID Driver (Use your phone as a USB keyboard/mouse)
- Compass & Accelerometer drivers now use State Notifier
- Fsync enabled by default
- Kexec-hardboot patch (for multirom compatibility)
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
Regular Version
Overclock-Ready Version Soon™
Click to expand...
Click to collapse
Looking for previous releases?
- All releases until 1.2.x: Go here
- All releases from 1.3 onwards: Go here
- KaminariLite (discontinued): Go here
- KaminariSL (previously Optimized Stock): Go here
Click to expand...
Click to collapse
Got into trouble and need to go back to the stock kernel?
Then you should click this link here, bud!
Click to expand...
Click to collapse
Flashing & Tweaking Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage (This is very important! If you flash the zip from a subfolder, you'll be left without wi-fi!!!)
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- (Optional) Wipe cache and/or ART cache
- Reboot and have fun!
Coming from another kernel? Then I suggest you to (at least!!!) dirty flash your stock rom and kernel in order to avoid any issues!
Wanna tweak it? Use Kernel Adiutor! (I do NOT support Synapse!!!)
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo, for putting up them sources
- The CyanogenMod team
- @Flashhhh, his work kinda inspired me to do this
- @Aayushya, he provided the initial cherry-picks
- @faux123, for Sound Control & Intellithermal
- @savoca, for Kcal Screen Control
- @hurtsky, a huge load of cherry-picks came from his sources
- @Alberto97, for the Linux version bumps (.43 up to .109)
- @YoshiShaPow, for some more stuff
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (Lollipop-Peregrine), Kernel for the Moto G
Contributors
kingkaminari
Source Code: https://github.com/Kamin4ri/KaminariKernel/tree/L
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R3
Stable Release Date: 2016-07-07
Created 2015-10-15
Last Updated 2016-07-09
Hey!!! Are you looking for the changelogs?
I'm moving them to this page here! So please wait!
F.A.Q. Read this before moaning!!!!!!
Q: ERMAHGERD DIS KERNEL SUCKZ, MAH BATTERY IS DEAD IN 30 MINS, PLZ HALP!
A: When I created this kernel, I never had the intention to have it decrease battery life. So before / instead of complaining, go check your f***ing wakelocks and fix them! The kernel isn't responsible for this, your apps and/or services are.
Q: Will this kernel work on AOSP / CM12.1 ROMs?
A: No.
Q: Will this kernel work on xyz rom?
A: No. Non. Nein. Title clearly says: STOCK.
Q: How do I report bugs?
A: If you wanna report a bug, then grab your kernel log - either by pulling /proc/last_kmsg (in case of a random reboot / kernel panic or oops) or copying the output of "dmesg" via shell - and paste it at pastie.org and link it in your post (or save it to a text file and attach it to your post). Don't bother getting logcats, they don't apply for kernel debugging purposes.
Q: How do I flash this?
A: I suggest you scroll up and read the OP. The instructions are there.
Q: How do I tweak this kernel?
A: Download Kernel Adiutor from the Play Store and have fun. For Synapse, scroll up and read the OP first.
Q: This kid is such a n00b!
A: Oh well then, why don't you go work on a kernel yourself, instead of criticizing my work and, by doing so, wasting your time?
Optimized Stock Kernel (aka "Kaminari SuperLite")
Since KaminariLite has been discontinued, and Kaminari has become cleaner regarding features, I've been working on a version closer to the stock kernel, only more optimized.
So here is my Optimized Stock kernel.
Differences in relation to the stock kernel:
- Compiled using my custom Linaro 5.2 toolchain
- Bumped to Linux version 3.4.110
- Compiled with -O3 and Graphite flags (Same as Kaminari)
- Most if not all of Kaminari's optimizations have been applied
- All governors except Interactive removed
- Default I/O scheduler changed to cfq
- Default TCP congestion algorithm changed to Westwood
- Supports both stock and GPE roms, regardless of filesystem (f2fs or ext4) used on /data
- Adds init.d support
- Default ZRAM size changed to 400MB
Differences in relation to Kaminari:
- All governors except Interactive removed
- All TCP congestion algorithms except Westwood and Reno removed
- Additional I/O schedulers (zen, vr, sio, fiops, bfq) removed
- Bricked Hotplug has been replaced by MPDecision
- All non-essential features (FauxSound, Kcal, Dt2w...) have been removed
- Stock PowerHAL has been re-enabled
- Version bump to 3.4.110 (Kaminari has been kept at 3.4.42)
- Compressed using LZO (Kaminari uses XZ)
Download it from here.
This one is mostly flash-and-forget. No need to tweak anything.
If you're coming from Kaminari, and you're using Kernel Adiutor, you MUST clear the app's data before flashing this build. If you can flash the stock kernel before flashing this, it's even better.
One more reserved...
Okay. Last reserved.
Oh guys... Can someone provide me their init.rc? So I can add proper init.d support
kingkaminari said:
Oh guys... Can someone provide me their init.rc? So I can add proper init.d support
Click to expand...
Click to collapse
Here the mine, :good:
Second test build is up! https://www.androidfilehost.com/?fid=24052804347838189
Changelog is in the second post.
pretty stable kernel as far as i can tell. There is just one thing.. how do i get the over clock to stick? no matter if i have intelliplug on or off it always changes back to default frequencies after a while
EpiccSkillZz said:
pretty stable kernel as far as i can tell. There is just one thing.. how do i get the over clock to stick? no matter if i have intelliplug on or off it always changes back to default frequencies after a while
Click to expand...
Click to collapse
Try a different governor. Interactive likes to reset the frequencies to their default values. Or the chipset may be incompatible (despite it still being - technically - only an msm8226 with lte support).
kingkaminari said:
Try a different governor. Interactive likes to reset the frequencies to their default values. Or the chipset may be incompatible (despite it still being - technically - only an msm8226 with lte support).
Click to expand...
Click to collapse
Could you please recommend me a governor?
EpiccSkillZz said:
Could you please recommend me a governor?
Click to expand...
Click to collapse
Either intelliactive or yankactive
Sent from my XT1033 using Tapatalk
Woww! Finally CPU overclock! It works very good! Thankyou man
I had read that overclock was virtually impossible because our phone was locked to a maximum CPU freq, it wasn't true? It's nice to have other options, thank you for the development.
rodsayd said:
I had read that overclock was virtually impossible because our phone was locked to a maximum CPU freq, it wasn't true? It's nice to have other options, thank you for the development.
Click to expand...
Click to collapse
I also believed that. But I once ran two Antutu benchmark tests, one with the default freq (1.2GHz) and the other with an increased freq (1.6GHz), and in the second test, I got a slightly higher score (which leads me to assume that the overclock actually works). Plus, my overclock implementation is different from the previous ones.
kingkaminari said:
I also believed that. But I once ran two Antutu benchmark tests, one with the default freq (1.2GHz) and the other with an increased freq (1.6GHz), and in the second test, I got a slightly higher score (which leads me to assume that the overclock actually works). Plus, my overclock implementation is different from the previous ones.
Click to expand...
Click to collapse
The phone has a locked multiplier, but it still have FSB overclock (like the old AMD athlom XP Days)
Dirty flashed on xt1039, it works. It's now time for tuning.
Thanks a lot! I was waiting for a kernel like this.
Is there the possibility to add the undervolting feature?
sclcn12 said:
Dirty flashed on xt1039, it works. It's now time for tuning.
Thanks a lot! I was waiting for a kernel like this.
Is there the possibility to add the undervolting feature?
Click to expand...
Click to collapse
I've tried to do that with falcon. I had to solve the merge conflicts manually, but in the end the phone wouldnt boot - it went into a red screen saying "watchdog reset detected" right after the motorola logo. So, with that being said, we wont have undervolting for now, at least till i manage to solve that conflict
Third test build up!
Download
Changelog is in the second post.
Thanks for the work, it's a great kernel. Working really great
Enviado desde mi XT1040 mediante Tapatalk
Features
Based on official CM-13.0 & CM-14.x kernel source
CPU Overclock (OC) upto to 2GHZ
CPU Underclock (UC) down to 162MHz
GPU Overclock up to 627MHz
CPU Voltage Control (VC)
Faux123's GPL Sound Control 3.5
Faux123's Simple GPU governor
Fast charge
F2FS
Gamma Control
TCP-cong: westwood, vegas, reno and etc.new
zRAM
LZ4 compressor/decomressor for zRAM
init.d support
MSM Limiter
-O3 Optimizations, and Neon Optimizations
Dynamic management of dirty page writebacks
Dynamic FSync
Dynamic LowMemoryKiller
Enable/Disable CRC
Enable/Disable Gentle Fair Sleepers
Additional CPU hotplugs:
MyFluxi MSM-hotplug
Alucard-hotplug
Intelli-Hotplug
Additional Governors:
Yankactive
Intelliminmax
Smartmax EPS
impulse
Alucard
Darkness
Nigtmare
Ondemandplus
Intelliactive
Lionheart
zzmoove
Additional I/O Schedulers:
SIO (Simple I/O)
SIO Plus (Simple I/O Plus)
V(R)
ZEN
DOWNLOAD:
Remix-2 for CM-13
AFH Kernel Folder
For CM-14
https://www.androidfilehost.com/?w=files&flid=125544
Available versions up to and including 2.14
- Unlimited = overclocked to 2052 MHz - If you get a boot loop after flashing this version, it means your hardware can not handle this frequency. Use the limited version
- Limited = max CPU freq. is the stock 1728 MHz. Use the Performance Control app if you want to overclock
As of Remix 2.15 there is only one version for 3G & DS and one for LTE
- The initial CPU frequency is set to stock, then can easily be overclocked with any kernel tweaking app
New version numbers
- After 2.18 the next new version is 2.7.13 as a result of a change in our version numbering system.
- New format: 2.A.B, where A will increase with every change to our custom features, B will increase when syncing with CM sources
Installation instructions
- FLASH USING TWRP 3.0 RECOVERY
- Copy xx.zip to your SDCARD
- Reboot into recovery
- Choose "Install zip from sdcard"
Guide on kernel configuration:
Most up to date guide on CPU governors, I/O schedulers and more!
Source: Github
credits:
@csendre
@osm0sis
@alexax66
@arco68
@F4k
@Grarak
@BlackAfghan
@kotzir
XDA:DevDB Information
CUSTOM KERNEL FOR CM13 & CM14 BASED ROMS, Kernel for the Samsung Galaxy S4 Mini
Contributors
DarkFrenzy, csendre
Kernel Special Features: CPU Overclock (OC) upto to 2GHZ CPU Underclock (UC) down to 162MHz GPU Overclock up to 627MHz CPU Voltage Control (VC) Faux123's GPL Sound Control 3.5 Faux123's Simple GPU governor Fast charge F2FS CPU governors
Version Information
Status: Stable
Created 2016-07-29
Last Updated 2017-05-21
Kernels for testing
attached below
Thanks bro!!!!
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
arsm74 said:
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
Click to expand...
Click to collapse
Give him boot.img from ur ROM zip,,he'll make one.
He is so kindful person.
And humble request from ME to All HIT THANKS BUTTON ON OP TO ENCOURAGE HIM.
And BTW bliss version for duos working like a charm on latest blissM build, thanks.
DarkFrenzy said:
Hi!
Welcome to unofficial version of f4ktion kernel, this is a kernel based on the arco68's/cm13.
Additional Governors:
SmartASSH3 -------> NOT WORKING PROPERLY. STUCKS ON MAX FREQ ALL THE TIME.
DOWNLOADS:
GT-I9192
BLISSPOP6.1 KERNEL --------> It's not BlissPop my friend, it's just Bliss. BlissPop was lollipop 5.1.1
Click to expand...
Click to collapse
Here I send you again the boot.img from my i9195 Bliss 6.1 (MM 6.0.1) Link
Please, correct the colored text :good:
o0chtm0o said:
Here I send you again the boot.img from my i9195 Bliss 6.1 (MM 6.0.1) Link
Please, correct the colored text :good:
Click to expand...
Click to collapse
hehe silly mistakes! thanks for that. your bliss is ready
http://forum.xda-developers.com/showpost.php?p=65273428&postcount=2323
It is for RR 5.6.3 from Blackjubel.
arsm74 said:
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
Click to expand...
Click to collapse
give me the boot.img
flipeicl said:
http://forum.xda-developers.com/showpost.php?p=65273428&postcount=2323
It is for RR 5.6.3 from Blackjubel.
Click to expand...
Click to collapse
for GT-I9190 ???
DarkFrenzy said:
hehe silly mistakes! thanks for that. your bliss is ready
Click to expand...
Click to collapse
Thank you very much. I apreciate your help, support, patience and dedication :good: :good: :good:
DarkFrenzy said:
for GT-I9190 ???
Click to expand...
Click to collapse
Sorry, it's for i9192.
flipeicl said:
Sorry, it's for i9192.
Click to expand...
Click to collapse
too late i uploaded it with GT-I9190 kernel. now removing.
cm13 stock (k2wl) boot image for i9192
rayzen6 said:
Give him boot.img from ur ROM zip,,he'll make one.
He is so kindful person.
And humble request from ME to All HIT THANKS BUTTON ON OP TO ENCOURAGE HIM.
And BTW bliss version for duos working like a charm on latest blissM build, thanks.
Click to expand...
Click to collapse
here is the boot.img as requested for cm13 stock build for i9192
arsm74 said:
here is the boot.img as requested for cm13 stock build for i9192
Click to expand...
Click to collapse
updated. check OP
(now going to sleep )
DarkFrenzy said:
updated. check OP
(now going to sleep )
Click to expand...
Click to collapse
Tks @DarkFrenzy...appreciate it
Here I leave you the boot.img files from Bliss 6.1 latest release (20160217)
Those that you've uploaded are from 20160208 (at least the ones I sent you).
Thanks for your help and support!
o0chtm0o said:
Here I leave you the boot.img files from Bliss 6.1 latest release (20160217)
Thanks for your help and support!
EDIT:
3g is taking a lot for downloading, I'll put it here as soon as it finish
Click to expand...
Click to collapse
i have already uploaded the bliss6.1 is that not latest ?
FM radio not working
DarkFrenzy said:
...
GT-I9192
....
CM13 KERNEL
....
Click to expand...
Click to collapse
A small but important bug report: When using your kernel (for CM13) FM radio doesn't start!
I'm using the latest version of CM13 (2016-02-15) plus Xposed and SuperSU-2.54-BETA.
After reflashing the CM13 package and the additions FM radio is ok again.
Keep up the excellent works! Can I help debugging somehow? Big thanks!
@DarkFrenzy Fast Charge works for me using Performance Control App. GTI-9195
Thanks again for your contribution