Database Develop

[ROM][GT-I9100G][4.0.4] CyanogenMod 9 nightly builds! [>60FPS][ROCK-SOLID]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.0 (ICS), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
KNOWN ISSUES
Click to expand...
Click to collapse
http://teamhacksung.org/wiki/index.php/CyanogenMod9:GT-I9100G:Nightly:Known_issues
FREQUENTLY ASKED QUESTIONS
Click to expand...
Click to collapse
http://teamhacksung.org/wiki/index.php/Experimental:GT-I9100G:Frequently_Asked_Questions
INSTRUCTIONS
Click to expand...
Click to collapse
Official CyanogenMod Update Guide:
http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_II_G:_Full_Update_Guide
First time installing CyanogenMod 9 to your Galaxy S II, or coming from another ROM:
- READ FAQs: http://teamhacksung.org/wiki/index.php/Experimental:GT-I9100G:Frequently_Asked_Questions
- Make sure you're running ICS bootloaders! (if you're unsure, flash a official ICS rom and proceed)
- Make sure you're running a proper working ClockworkMod-Recovery
- Copy GApps and CM9 ZIPs to your internal SDCard
- Boot into Recovery
- Flash CM9 zip from internal SDCard
- Flash GApps zip from internal SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore Apps using Titanium Backup!
Upgrading from earlier version of CyanogenMod 9:
- Copy CM9 ZIP to your internal SDCard
- Boot into Recovery
- Flash CM9 zip from internal SDCard
- Reboot
DOWNLOADS
Click to expand...
Click to collapse
STOP!!!
Did you read THIS POST, the FAQs and KNOWN ISSUES?
If yes, happy downloading!
Download / Nightly builds:
http://download.cyanogenmod.com/?device=i9100g
can also be found at ROM-Manager
Google Apps:
Get the latest Version from Rom-Manager.
Newer, unsupported versions can be found at http://goo.im/gapps
CWM flashable Modems:
ZCLP7: Download
DDLP5: Download
Have a look at ROM-Manager (Developer: codeworkx) for more Modems.
CHANGELOG
Click to expand...
Click to collapse
http://changelog.bbqdroid.org/#i9100g/cm9/next
TEAMHACKSUNG SUPPORT CHAT
Click to expand...
Click to collapse
Webchat: http://webchat.freenode.net/?channels=teamhacksung-support
Server: chat.freenode.net
Channel: #teamhacksung-support
Don't expect any support if you:
- are not running stock cm-kernel
- have installed any mods
- have modified system files
DEAR KANGERS
Click to expand...
Click to collapse
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
SCREENSHOTS
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SUPPORT US
Click to expand...
Click to collapse
If you want to donate a few bucks for the work we're doing in our freetime, goto teamhacksung website and hit the big donate button.
Thanks to all donators!

Yes please do it there are lots and lots of g versions sold out there may be more than original version
Sent from my GT-I9100 using xda premium

Please develop for g version
Sent From My Samsung Galaxy S II

Looks like people with non G have voted no
People only with G should vote
Sent from my GT-I9100 using Tapatalk 2 Beta-5

sahibunlimited said:
Looks like people with non G have voted no
People only with G should vote
Sent from my GT-I9100 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
I don't care about "no". If there are enough votes for "yes", then the show will begin.

is they differ only with the name?one has got g the other no xD
Sent from my GT-I9100 using Tapatalk

Great start! Lets hope there are enough yes to kick start the work
Sent from my GT-I9100 using xda premium

We with no G will be glad to share our best developer
so you can see what is android in real...

Yes! This model is being overlooked because it's running a poorer GPU.

codeworkx said:
I don't care about "no". If there are enough votes for "yes", then the show will begin.
Click to expand...
Click to collapse
Its just awesome.. Can't wait

nice one
pls do it bro.. cant wait to see ur nice job thx

would really appreciate that! <3

Will properbly use it after release. use it in my htc desire and htc sensation..love it very much

WE NEED u.... 9100G buddy!!!

voted!

Yes!we really want CM on i9100G!it will be wonderful!

Finally The Master"codeworkx" has some interest In our Device Great
I can be Tester If you Want in Future.....

hey codeworkx
i have voted.so tell which version of cyanogenmod are you releasing the 7 or the 9 if the yes wins the vote.and also if you guys need any help just ask.

we really need this..6 months waiting for it.....

codeworkx said:
Hey guys,
you might have noticed that the international versions of samsung phones got great cyanogenmod support but the GT-I9100G didn't.
The reason for this is, that the international one is powered by an Exynos 4 SoC and the I9100G by an Omap 4 one.
Since nobody of our team owns a I9100G, we're not able to develop on it.
Now the deal:
If there are enough I9100G users interested in CyanogenMod for this device, i might buy one.
Please vote!
Click to expand...
Click to collapse
I do't own a G version but I just wanted to say that you are one o the best members of our comunity! I mean You would buy a G version just because the community want's CM9. You Sir are a great guy!

[ROM][GT-I9100G][JB][4.2.2] CyanogenMod 10.1 official nightlies

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
IMPORTANT INFORMATIONS
Click to expand...
Click to collapse
We'll not support users and answer questions from users which:
- are running a custom kernel
- have flashed mods
- modified system files
- didn't follow our intructions word by word
- are unfriendly
Even if you tell us that your problem is not related to your custom kernel /mod / magic => WE DON'T CARE!
Your mod => your problem!
WIKI
Click to expand...
Click to collapse
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/I9100g_Info
INSTRUCTIONS
Click to expand...
Click to collapse
First time installing CyanogenMod 10.1 to your Galaxy S II, or coming from another ROM:
- Copy GApps and CM10.1 ZIPs to your internal SDCard
- Make sure you're running a proper working ClockworkMod-Recovery
- Boot into Recovery
- Flash CM10.1 zip from internal SDCard
- Flash GApps zip from internal SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.1:
- Copy CM10.1 ZIP to your internal SDCard
- Boot into Recovery
- Flash CM10.1 zip from internal SDCard
- Reboot
Upgrading from CyanogenMod 10:
- Copy GApps and CM10.1 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.1 zip from SDCard
- Flash GApps zip from SDCard
- Reboot
- Wipe data of clock app
- Reset everything under Settings -> Date & Time otherwise editing alarms might cause FCs
DOWNLOADS
Click to expand...
Click to collapse
CM10.1 official nightly builds:
http://www.get.cm/?device=i9100g
Google Apps:
http://goo.im/gapps
JB Bootloaders:
Flash with Odin as PDA at your own risk!
International: GT-I9100G_JB_PBL_SBL.tar.md5 - 1.50 MB
China:
CHANGELOG
Click to expand...
Click to collapse
http://changelog.bbqdroid.org/#i9100g/cm10.1/next
TEAMHACKSUNG SUPPORT CHAT
Click to expand...
Click to collapse
Webchat: http://webchat.freenode.net/?channels=teamhacksung-support
Server: chat.freenode.net
Channel: #teamhacksung-support
DEAR KANGERS
Click to expand...
Click to collapse
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
SCREENSHOTS
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SUPPORT US
Click to expand...
Click to collapse
If you want to donate a few bucks for the work we're doing in our freetime:
Thanks to all donators!

Wow!!! You are great man!!!:thumbup::thumbup::thumbup:
Sent from my GT-I9100G

wow wow!!!! =) =) amazing man!!!! big big thanks!! cm10.1!! =D

I knew something was gonna make me enjoy my weekend
BTW is the gapps compatible with 4.2 ? on my nexus 7 it isnt.

The Master has started the work!!
I9100G rejoice and are grateful to codeworkx..
Can't forget the days when we were even waiting for ICS.. No looking back since code got working on 9100G :highfive:

Thanks alot for your hardwork wish you happy day as you made pur day happy ))))))))))))
Sent from my GT-I9100G using xda app-developers app

Yeaaaaaahhhhh!!! CodeworkX you're great!!! Thank you.. :beer:
Sent from my GT-I9100G using Tapatalk 2

Amazing!!!!

Anyone tried to flash this from from CM10 without wipe?

Yo
Sent from my GT-I9100G using Tapatalk 2

At last!CM10.1!thx Codeworkx!!ur the best! :thumbup:
Sent from my GT-I9100G using Tapatalk 2

Thank you very much!

codeworkx, you are really really fantastic....
thank ya XD ....

That was fast but its codeworkx, nothing less can be expected . Awesome as usual

Nice one.. + 1 :d

No need to wait for 2040. Yay.

Gapps gave me force close. And my 3g doesn't work. Is there a workaround?
Sent from my GT-I9100G

iXanza said:
Gapps gave me force close. And my 3g doesn't work. Is there a workaround?
Sent from my GT-I9100G
Click to expand...
Click to collapse
Using 4.2 gapps or 4.1.2 gapps ?

Infinite96 said:
Using 4.2 gapps or 4.1.2 gapps ?
Click to expand...
Click to collapse
I don't think 4.2 gapps is released.

Xiger said:
I don't think 4.2 gapps is released.
Click to expand...
Click to collapse
Downloading the one i used for nexus 7 now. If it works will post link
Sent from my GT-I9100G

[ROM][4.4.2][Official] Infamous Open Kang Project [N8013/N8000]

.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
By using the rom you agree with the above terms!
​
Q & A Thread
We encourage you all to take non-development related questions to our Q & A thread. Thank you.​
This is a group effort with @Mr Impossible, @mgbotoe and @Midnight_Rider so make sure to thank them! We are starting a whole new experiences. Infamous Open Kang Project! AOKP is our base then we are adding what we want. We plan on adding the newest and greatest stuff all while remaining stable for the perfect daily driver. Feel free to make suggestions and please let us know what you think. Thanks!
- Source can be found here: https://github.com/IOKP
- My source - Jamison904
- Mr Impossible source - mrimp
IOKP Change log
Click to expand...
Click to collapse
IOKP ROM - Download folder
(link updated)
IOKP Gapps - Download folder
Standard Gapps - Download link
Code:
Broken:
Found a bug?
[URL=http://forum.xda-developers.com/showthread.php?t=1726238]Pull a log to help me help you[/URL]
Donate to Jamison904
Donate to Mr Impossible
Donate to Mgbotoe
Donate to Midnight_Rider
Donate to djmatt604
XDA:DevDB Information
[ROM][4.3.1][Official] Infamous Open Kang Project [N8013/N8000]- Nov 10, 2013, a ROM for the Samsung Galaxy Note 10.1
Contributors
Jamison904, MR Impossible
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.0.x
Version Information
Status: Stable
Current Stable Version: 2013-11-10
Stable Release Date: 2013-11-10
Created 2013-11-10
Last Updated 2013-11-18

................

Re: [ROM][4.2.2] AOKP MR1 Kang Project
Awesome work man thanks cant wait to try
Sent from my GT-N8013 using xda premium

ETA on version 2?!?! When's the next release?!
lol, sorry, I just had to do it. Downloading now! Great work, James!
:laugh::good:

Link is posted. Let me know what you guys see. I noticed the camera was FC... I'll look into it.
never mind. Camera works great! Had to grab the kernel from CM10.1, just a heads up guys. The one that built with it was stuck at min/max 200Mhz...

Re: [ROM][4.2.2] AOKP MR1 Kang Project
Jamison904 said:
Link is posted. Let me know what you guys see. I noticed the camera was FC... I'll look into it.
never mind. Camera works great! Had to grab the kernel from CM10.1, just a heads up guys. The one that built with it was stuck at min/max 200Mhz...
Click to expand...
Click to collapse
Wow! Aokp on my note! Sweet..can we flash any cm 10.1 kernel with this?
Sent from my GT_N8013 using XDA Premium HD app

Re: [ROM][4.2.2] AOKP MR1 Kang Project
I am lost... is there any other CM10.1 kernels for the n8013? If so I need to get out from under whatever rock I must live. Lmao
Sent from my dark hole called an office.

Thrown n8000 into the pot. Now let's see if it builds over night...

Re: [ROM][4.2.2] AOKP MR1 Kang Project
Jamison904 said:
I am lost... is there any other CM10.1 kernels for the n8013? If so I need to get out from under whatever rock I must live. Lmao
Sent from my dark hole called an office.
Click to expand...
Click to collapse
Yea humberos makes a sweet oc/uv kernel for cm 10.1..I can pm a link if you'd like.
Sent from my DROID RAZR using xda app-developers app

Please do man. Thanks!

Re: [ROM][4.2.2] AOKP MR1 Kang Project
OK the n8000 build over night without any issues. Added the latest CM kernel and modules. Uploading now. I really need some people to test it and provide fee back as I dont own the n8000 and am unable to test it personally.
Also what do you n8013 guys think? Haven't heard any feed back yet. Thanks
Sent from my dark hole called an office.

Installed in n8013...
Runs pretty fast and smooth..
Few bugs- More of a cosmetic issues
1. navigation bar - icons not shown in phone mod
2. Editing of the menu resulted in system ui error , needing a factory reset. All good since then
3 . When trying to change height of navigation bar and looks like device thinks portrait is landscape and vice versa
3.sliding brightness of taskbar does not seem to work
4. No icons show up in the notification bar in phablet mode . however fine in tablet mod
5. Also a direct link to gapps in first post would be great ( Not the modded one from OP)
Will report more later

Re: [ROM][4.2.2] AOKP MR1 Kang Project
Works great! I'm rocking the tablet mode and I'm loving it..I think that's a first from other cm 10.1 ROMs! The only thing I can't find are the nav bar transparency settings but I see how implementing those might be a pita. Everything else seems to be working fine and as usual the AOKP rom controls are spot on. Don't worry I think people will come on board when the get tired of Samsung's tw nightmare and lack of customization. Keep up the good work man! Oh and Netflix still needs entropy's module fix if anyone uses it.
Sent from my GT-N8013 using XDA Premium HD app

The only two things that I miss are
1. Multiwindow - There was a talk about implementing cornerstone by cyanogen team, but looks like it was dropped as google was not happy with it.. Hopefully someone would re start the project
2. Samsung keyboard. Love the handwriting recognition engine in it.. But read somewhere that someone has port it.. Will have to find that out...

Good deal. Thanks guys! I will look into the cosmetic issues and see if I can cherry pick anything for them. Since I ported these over there isn't a device maintainer as of yet so I might have to do thing more manually. Cornerstone would be awesome and something I might look into soon if this thing really takes off. I think Rob had it working pretty well on the tenderloin. @TexasRules777 do you also have a link to the Netflix fix?
Still waiting on some feed back on the n8000. Lmao don't even know if it boots but a few people have downloaded it so.

Re: [ROM][4.2.2] AOKP MR1 Kang Project [20130217]
Absolutely.. http://forum.xda-developers.com/showthread.php?t=2101525
Sent from my GT-N8013 using XDA Premium HD app

N8000 feedback
Superb job, OP. Been playing with the rom for two hours now. Solid, no major bugs encountered so far :good: I can confirm the cosmetic bugs mentioned by aalupatti especially the nav bar ones. Not a problem for me, I usually disable the navbar and use gesture control so I can have fullscreen and thanks for bringing back tablet mode, I couldn't simply understand the common sense (or lack of) in cm10.1 roms putting both statusbar and navbar and taking up alot of screen real estate Just to let you know its working on the N8000.

N8010
Hi Jamison904,
do you plan to build this for the N8010 too?
Regards

Very nice, James. I finally got around to getting it installed and it's really good. First time running 4.2 on a tablet, so I'm excited about the multi user aspect. But side note, I didn't realize that root didn't apply to the non-primary users... That kinda sucks. lol
But ROM wise, well done. :laugh::good:

[ROM][UB][4.4.4][Z2][Linaro 4.9] Carbon Rom KK Unofficial {built from source}

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi to all of you, Sirius owners.
Let me introduce CarbonRom, Unofficial: since Z2 is not (yet) officially supported by Carbon team. Obviously this is for UNLOCKED BOOTLOADER
This is only my compilation, all the real work has been done by Team Carbon
​
Andros11
BigShotRob
Bionic Beast
dg4prez
Kejar31
mattmanwrx
morfic
nocoast
pixeldotz
slick_rick
winner00
vishal_android freak
The original thread is here: http://forum.xda-developers.com/showthread.php?t=2137013
Team carbon's Google+ : https://plus.google.com/communities...2/stream/f82fcffc-02a6-470e-a254-e200b9f78ee5
About Carbon
CarbonRom is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look at, build, and use our code on CarbonDev GitHub.
We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained and can be viewed on our repository.
Special thanks also go to Slim Rom for some of their features, PA, AOKP, and anyone else we may have borrowed commits from that hasn't been mentioned here. If you feel you have been unfairly left out, please - let us know.
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in #teamcarbon on freenode IRC.
Features
Android 4.4.2
As of today:
This is all very much a work in progress. Carbon Fibers are still in the process of being merged with 4.4.2, but I'm sure it'll be ready soon...
(all features will have to be verifed)
Bugs:
Build 1 testing
U tell me...
* By flashing this, you automatically void your warranty!
* If your phone breaks, blows up or runs away from you, do not cry to us!
* Do not ask for ETAs!!
Click to expand...
Click to collapse
Instructions
1. Make sure you have CWM installed and a working nandroid backup
2. Download the ROM.
3. Place the ROM on your SD-Card.
4.Extract boot.img included in zip and fastboot flash it via Flashtool or CMD
5. Reboot to recovery.
6. Wipe data-factory reset/cache partition/dalvik cache
7. Flash the ROM.
Optional- Flash GApps.
8. Reboot and Enjoy Carbon!
Support
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our goo.im page linked above. It's new, but expanding fast. Just like us!
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Join our G+ Community: http://community.carbon-rom.com This is where we spend the bulk of our time and the best way to reach us and other community members. We update and frequent this community far more than XDA, simply due to time constraints and the convenience of G+.
5) Ask a question on our IRC channel. Connect to #teamcarbon on irc.freenode.net or click here. You'll find several other Carbon fans and usually one or more devs as well. Please be polite.
Downloads
Carbon KK unofficial download folder
PA Gapps 4.4.2 thread
OFFICIAL Carbon's CHANGELOG
Here is my changelog, up here u have Carbon's official changelog to see what's happening at sources...
Code:
[B][U]Build2[/U][/B]
Carbon sources sunced
Device tree fixed...
Zip fixed
[B][U]Build1:[/U][/B]
initial release... [B][COLOR=Red]--->[/COLOR][/B] test build
Most of the builds from today (Z/ZR/ZL/Z1) had error status 7 while flashing
Even some other brands did. Carbon team is aware and actually working on it
If u have this issue, then wait for build2
Credits
(in no particular order)
As i already mentionned, obviously Team Carbon you maybe can show some support to this team by donate'em
Special thanks to these guys who teached me everything =)
@percy_g2
@x10forevers
And indeed Sony,Google, and CyanogenMod team for their work, sources, repos,device trees, vendor files etc...
#include<iforgotyou.h>​

Thanks to @Hogyoku for screenshots

I guess it has all the bugs from cm11?
Sent from my D6503 using Tapatalk

Reb0rn said:
I guess it has all the bugs from cm11?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Since its based on it...yes =)

Reb0rn said:
I guess it has all the bugs from cm11?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Were you seeing any bugs on CM11 other than the camera not focusing? Seems to be the only one I have run into.
Sent from my Xperia Z2 using Tapatalk

The zip isnt flashing. I can open it ith 7zip without error but when I flash i flash with Philz recovery or the one included in CM build. It gives an Status 7 error, "set perm: some changes failed". It says there is an error in the zip. Please have a look.

nickwarn said:
The zip isnt flashing. I can open it ith 7zip without error but when I flash i flash with Philz recovery or the one included in CM build. It gives an Status 7 error, "set perm: some changes failed". It says there is an error in the zip. Please have a look.
Click to expand...
Click to collapse
if u read op it states in changelog that its the first build and a lot of Carbon builds were like that on last 2 nightlies.
Cyanogen modified tool for ota package wich make all our build broke.
I wasn't even able to build Friday, yesterday it went thru but as u saw error7 shows because init is trying to call and change perm on inexistant files...
I will build another one soon as its fixed. Don't worry i will also update 2/3 times a week...
Tapatalked from my PolluxWindy

Wel i was able to build cm11 every time last week!

QuickS_NL said:
Wel i was able to build cm11 every time last week!
Click to expand...
Click to collapse
i spoke about Carbon sources, not CM11, changes made for CM11 on ota packaging tool and other stuff works on CM11 not Carbon
Regards.
Tapatalked with my Yuga

New build is up
Build 2 here
Changelog
Carbon sources sunced
Device tree fixed...
Zip fixed

Alx31TLse said:
New build is up
Build 2 here
Changelog
Carbon sources sunced
Device tree fixed...
Zip fixed
Click to expand...
Click to collapse
May i know what you fixed on the device tree?

i erased my whole carbon folder and restart from scratch...
my github is here if u need

Build 2 flashed and booted fine. Thank you OP

Thanks for report...
Tapatalked with my Yuga

Alx31TLse does this ROM have all the Sony bloatware in it? or just AOSP plus the Carbon bits ?
Thx .. KJ
Sent from my D6503 using Tapatalk

Why the step nr 4 in the instructions, isn't a clean flash enough?
(long time Nexus user here.. )

Vangelis13 said:
Why the step nr 4 in the instructions, isn't a clean flash enough?
(long time Nexus user here.. )
Click to expand...
Click to collapse
With Sony devices, all cm and cm based has to be flashed with fastboot, when coming from stock.
Or else only wipes it's ok coming from cm...
If not; error while flashing, recoveries for stock roms doesn't flash cm kernels i guess.
@kjhughes
its cm11 based...plus features....

Flashed this earlier, no really issue for me at all other than
- Camera and Camcorder
-Doesn't seem as smooth as stock (scrolling)
Other than that, it's working with no problems for me. Had to go back to stock so I can't test anymore. Awesome work dude!!!
Sent from my D6503 using Tapatalk

waynekirby said:
Flashed this earlier, no really issue for me at all other than
- Camera and Camcorder
-Doesn't seem as smooth as stock (scrolling)
Other than that, it's working with no problems for me. Had to go back to stock so I can't test anymore. Awesome work dude!!!
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Thanks for report; and yeah, camcorder as cm11 cuz rom is based on it.
Tapatalked from my PolluxWindy

Alx31TLse said:
Thanks for report; and yeah, camcorder as cm11 cuz rom is based on it.
Tapatalked from my PolluxWindy
Click to expand...
Click to collapse
I know mate, just reporting it anyway. Mainly for other people wanting to use this purely as a bugfree DD.
Keep up the great work and I'll look forward to more update buddy :good:
Sent from my D6503 using Tapatalk

[ROM][5.1.1] UNOFFICIAL GarfongenMod 12.1 [2015.05.09]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
/*
Unofficial build of CyanogenMod 12.1(Android 5.1.1) for the i9300​
Introduction​Hello everyone I would like to share my first ROM. Because i hear that at some point all the developers will start stop supporting this phone and I decided to update the phone on myself and share the builds with the community. This is my first project of mine in order to learn how to build roms from sources and better.I never really did something like this before but i always wanted to try it. With this said i am sharing with you this ROM that i build from CyanongenMod Sources. I will be updating this rom occasionally from the sources of CyanongenMod for our phone i9300.
This ROM is going to be based based on stock CyanongenMod at initial release. So far is works great so far as a stock CyanongenMod and if there is any bugs are already known bugs from CyanongenMod if any.
Installation instructions
Clean Flash
1. do a nanoback up of your system
2. do a data factory reset of your phone
3. wipe divlk/cache/data/system
4. flash the rom
5. flash the gapps
6.wipe davlks/cache
7.reboot
Dirty Flash
1.do a nanoback up of your system
2. wipe davlks/cashe
3.install rom
4.boot
enjoy​
Images​
Changelog: 20.08.2015​-initial Release​
My ROM :
Replaces few stock apps, like Gallery with QuickPic, with my favorites
some build.prop tweaks i liked
CM Updates
What works​Everything works as far as i know only those bugs that are well known from CyanongenMod​
Downloads:​STOCK ROM
Link
MY ROM
XDA
GAPPS
​
FAQ​
Work in this on my free time if there is any bug please submit it to CyanongenMod i am not going to fix any bugs or problems that are already known in CyanongenMod. This is just a stock rom based on CyanongenMod 12.1 with updated sources for now. Thanks and enjoy.
Thanks To/Credits
CyanongenMod
JustArchi for his Manifest
Moster2,arter97 for supporting i9300​
XDA:DevDB Information
Unofficial GarfogenMod 12.1, ROM for the Samsung Galaxy S III I9300
Contributors
Cushbe
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2015-08-22
Last Updated 2015-09-05​

Sound great ! What are the differences and/or improvements of your rom compare to other CM12.1 roms ?
P.S :Fixed

Chimbat said:
Sound great ! What are the differences and/or improvements of your rom compare to other CM12.1 roms ?
P.S : In your 1st post there are a lot of CyanongenMod instead of CyanogenMod
Click to expand...
Click to collapse
Thanks for notice it and i fixed it my ROM for initial release is just going to be stock CyanogenMod rom. I am going to just update to the latest sources. At the moment this ROM is stock CyanogenMod which means there are not going to be any mods or tweaks. My plan is to find the best tweaks and make a ROM that is smooth and works great on this phone for daily day.

Thank you for you prompt answer, i will test your rom.
Do you think that you can add this tweak without using xposed :
http://forum.xda-developers.com/showthread.php?t=2101525
What will be great as well is to have boeffla sound in your rom
All the best for your incoming work!

Chimbat said:
Thank you for you prompt answer, i will test your rom.
Do you think that you can add this tweak without using xposed :
http://forum.xda-developers.com/showthread.php?t=2101525
What will be great as well is to have boeffla sound in your rom
All the best for your incoming work!
Click to expand...
Click to collapse
You very welcome and ill look into it and see what i can i do not promise anything. I am still learning how to make roms and i am still new to this. My main goal is to have updated Cyanongen Mod sources for I9300 more often. Also about boeffla sound you could flash Boeffla Kernel which add boeffla sound as well but i prefer to have the stock Kernel because i find it a little bit more stable. Thanks for your wishes

So... This is just a build made by you with the same sources that JustArchi's CM?

ouch01 said:
So... This is just a build made by you with the same sources that JustArchi's CM?
Click to expand...
Click to collapse
You are insightful captain obvious

ouch01 said:
So... This is just a build made by you with the same sources that JustArchi's CM?
Click to expand...
Click to collapse
I actually only use JustArchi local Manifest.xml nothing else...... because CyanogenMod doesnt support i9300 soooooo i had to use JustArchi localManifest. This rom is updated version of CM 12.1 for i9300.

Its not better to wait that JustArchi definetely stop the developpement for the S3 ? There is same on 2 different thread.

KeTuRr74 said:
Its not better to wait that JustArchi definetely stop the developpement for the S3 ? There is same on 2 different thread.
Click to expand...
Click to collapse
Better to learn when S3 Jedi masters ( like JustArchi, Arter97, dhiru1602 and few others) are still working on our device.
Our new S3 padawan dev might become a Great S3 Jedi Master dev.
We should support all the devs which are working on our old but beloved S3.

I downloaded the ROM this morning but after a full wipe (except external sd) it failed to flash in recovery (twrp 2.8.6.1). Partition problem...
I ask to save a log on sdcard from twrp but I can't find out where is it at the moment.

Hey did you try to flash it over another rom? Try to flash stock rom using Odin and try again. I didn't had any problem flashing this rom on my device.
Sent from my GT-I9300 using XDA Free mobile app

I agree with you that right now as it is there are not many differences but I am going to add tweaks and modifications that I personality like for this phone. In order to make it work better. I will try to make a stable rom that's works for daily use.
Sent from my GT-I9300 using XDA Free mobile app

Cushbe said:
Hey did you try to flash it over another rom? Try to flash stock rom using Odin and try again. I didn't had any problem flashing this rom on my device.
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
I wiped cache/dalvik/system/data/internal storage.
I will try again later. Thanks.

Chimbat said:
Better to learn when S3 Jedi masters ( like JustArchi, Arter97, dhiru1602 and few others) are still working on our device.
Our new S3 padawan dev might become a Great S3 Jedi Master dev.
We should support all the devs which are working on our old but beloved S3.
Click to expand...
Click to collapse
What if Cushbe is a new Darth vader uh?

GreekDragon said:
What if Cushbe is a new Darth vader uh?
Click to expand...
Click to collapse
shhhhhh we dont want everyone to know my little secret

i like the way you work it

Cogratulations brother.

new CM 12.1 stock build
-Updates Sources
Downloads:​Android Host File​