Can anyone suggest a not too expensive car mount that fits the tmo HD2? the windshield kind, not the vent kind.
NOt sure..but this is the best one!
http://www.proclipusa.com/home/home.aspx?afid=42&admkt=670ca577&gclid=CKTHtJipw6QCFUNM5Qod1Wf8iw
I found a perfect mount at compusa that is made for an iphone but works great on my HD2. can send part number if needed.
Sent from my SGH-T959 using XDA App
I use the Tetrax Xway. It requires a magnet on the back of the case. I initially thought it would be annoying but I positioned it in the very middle of the phone so the phone can spin on it. I can't tell you how much enjoyment being able to spin my phone has been. With a good twirl it can spin for 2 minutes 30 seconds. I really freaked people out when Inception was big as it seemed to never stop spinning like that totem.
But the actual mount attaches to the car's AC vent which is the perfect position. The center console just seems too far away. It can be just to the right of the steering wheel.
An additional benefit is with a neodymium magnet set I got from ThinkGeek I can mount the phone anywhere that's metal. I just take four of the little cylindrical magnets and form a square with them. The phone magnet fits quite well in the divet in the middle of them. I now have a phone mount on the hood of the oven to load recipes while I cook (or watch a movie). It's quite secure, and the magnet won't hurt the phone. Just keep anything with a hard drive away like an iPod.
An interesting possibility would be to buy a cheaper clip on cover from eBay (preferably black) then buy a cheap gps mount. Then glue the case onto the mount. Then you will have an adjustable $10-15 cheap car mount
i wonder if they would make one that fits hd2 that has an otterbox case on it
It's amazing! Best custom mount I've owned. And the clip that holds the phone is also a removable belt clip. There's a punch out for the camera, been driving around with layar turned on. It is win.
Sent from my ADR6300 using XDA App
link?
10 chars etc
I haven't seen it online yet, only in a store so far. Ill post pix later.
Sent from my ADR6300 using XDA App
Is it any different than this one?
http://amzn.com/B003LEGZGK
AFAIK, this is the only custom mount of ANY KIND for the Incredible produced by HTC, which drives me crazy.
tdiman said:
Is it any different than this one?
http://amzn.com/B003LEGZGK
AFAIK, this is the only custom mount of ANY KIND for the Incredible produced by HTC, which drives me crazy.
Click to expand...
Click to collapse
There are two versions available from the Verizon store. The one you linked to and one other. They both have one big issue. If you already have a protector for your phone that you like, it will not work unless you take your protector off. The one you linked to has one other issue, it uses double sided tape to mount. The other one I looked at had a suction mount, but as I said, it will not let you put your phone on it unless you remove any protector you are using.
the one linked is the one i'm talking about. i haven't found it on the VZW website anywhere, didn't think to look anywhere else. i don't use a case or anything full time, i ordered an otterbox for when i'm working to wear on my belt, but when i'm not i just throw the phone in my pocket and run. i wish seidio came out with a car mount like this that worked with one of their cases, that would be epic. i'm sure with a dremel tool you could make it work if you were so inclined.
I have this one
I bought this with my incredible when I first got it. before 30 days was up the clip broke. I took it back and got it replaced. Then a couple of weeks later the new one broke in a different place. I hadn't even taken the new one off the car mount and worn it on my belt. I ended up cutting off the clip and gluing the clip to the mount so that it became a car mount only.
dltccf said:
I bought this with my incredible when I first got it. before 30 days was up the clip broke. I took it back and got it replaced. Then a couple of weeks later the new one broke in a different place. I hadn't even taken the new one off the car mount and worn it on my belt. I ended up cutting off the clip and gluing the clip to the mount so that it became a car mount only.
Click to expand...
Click to collapse
where did it break?
i'm wondering if there's a way i can use another company's clip and case without having to remove it. thinking of getting the seidio innocase and clip or something like that, maybe just cut the little tab off of the car mount clip and using that on whatever one i end up getting.
I don't want or use the belt clip, just adds another point of movement to the system. There's no happy medium with adjustments, you either get it where you want it and tighten it down to no flexibility, or it is way too loose. Due to the way the suction cup is engineered, the act of placing the phone or removing it from the clip torques the suction, causing it to fall off all the time. Was not at all impressed.
I have this mount I just pictured. I find it reliable. I do not use the belt clip.. I always leave that on the mount.
I have never used phone cases on any of my cell phones for 12 yrs.. I only have a screen protector..
Dinc goes in my phone pocket. My designated pocket only for my phone.. Not change or car keys..
Carefull
I have one of these.. or I should say I've had 2 of these. First one broke after about 8 seconds of being up and I tried to rotate the phone, and the hing that holds the clip on snapped.
Took it back to Verizon they swapped it out... had the second one a month or so and went to remove the phone and clip from the stand... and the plastic washer that holds the clip to the mount broke.... I now have it zip tied and it works great.
I was not rough with it, its just very fragile. Otherwise a good mount.
I've had 2 and the first one broke within a week. The clip that hooks into the mount broke and wouldn't mount. The second one I had for a few days before it broke. The one the hinge went. I didn't bother trying to replace it again. They did swap it out, but if two break that quickly, I figure I'll just keep having the same problems.....
Add me to the "it's too darn fragile" camp. I ended up buying a third-party "one size fits all" type... They lie too, but it works. I just have to adjust it so the volume key isn't being squashed. (also, no cut out for camera)
2 broken clips at hinge and counting.
Same here, my clip hinge broke both times. I just have it sitting there in the car driving down the road and the phone just falls off and the hinge is broken. I think the plastic is too thin, should be a metal part, and the spring tension always on it fatigues it. Bad design.
I went to verizon and told them I wanted their generic mount and they handed me this:
http://www.amazon.com/Bracketron-PH...r_1_41?s=STORE&ie=UTF8&qid=1285511830&sr=8-41
The one Verizon actually sells is slightly different as the little bottom nodes that hold the phone phone sits on can be bent in and thus you can move the phone around. I will have to take a picture of mine. Anyways even with a case it fits perfectly and its only like $20 and if you have the corporate discount which gets you 25% off it runs about $16.70 total after taxes which is what I bought it for.
angryspoon said:
I went to verizon and told them I wanted their generic mount and they handed me this:
http://www.amazon.com/Bracketron-PH...r_1_41?s=STORE&ie=UTF8&qid=1285511830&sr=8-41
The one Verizon actually sells is slightly different as the little bottom nodes that hold the phone phone sits on can be bent in and thus you can move the phone around. I will have to take a picture of mine. Anyways even with a case it fits perfectly and its only like $20 and if you have the corporate discount which gets you 25% off it runs about $16.70 total after taxes which is what I bought it for.
Click to expand...
Click to collapse
So which one would you recommend? I plan on doing a lot of driving up and down I-95 to visit friends in Maine/NH/PA/MD/VA and would love having Google's "Navigator" mounted on my windshield instead of having it sitting in a cup holder (like I do now). I'll be careful with any mount I get, but those universal mounts are just too bulky and a lot of them mess with the volume controls or doesn't leave me a space to plug the phone into my lighter outlet (or have weird mounting points, like in one of the air vents).
DeeBG said:
So which one would you recommend? I plan on doing a lot of driving up and down I-95 to visit friends in Maine/NH/PA/MD/VA and would love having Google's "Navigator" mounted on my windshield instead of having it sitting in a cup holder (like I do now). I'll be careful with any mount I get, but those universal mounts are just too bulky and a lot of them mess with the volume controls or doesn't leave me a space to plug the phone into my lighter outlet (or have weird mounting points, like in one of the air vents).
Click to expand...
Click to collapse
I really recommend the Verizon one made for the incredible. all buttons and ports are accessible on the incredible
Like I said, I leave the belt clip mounted at all times, and the only protection I use for my phone is my special pocket and a screen protector.
patches152 said:
It's amazing! Best custom mount I've owned. And the clip that holds the phone is also a removable belt clip. There's a punch out for the camera, been driving around with layar turned on. It is win.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I just bought it on a whim today and it is definitely great. Way better than the staples generic one that broke in the first 2 weeks
Wife and I both have one. Both broke right away. Replacements also broke. Always in the same place, the hinge for the clip snaps. The spring is simply way too powerful for the strength of the plastic. On the replacements I just slathered epoxy all over the hinge to make it a permanent mount. Neither one of us were using it for anything other than the car dock, but the thing just breaks like a cheap wine glass.
So in my experience they were 4/4 for breaking within 3 weeks. It's a great dock, but you just have to expect it to break unless you do what I did and glue the living crap out of it.
ive had my verizon mount for about 2 weeks now, my only complaint is that it has a removable belt clip. Ive tried different locations around my windshield and since I play with it so much, the clip has wiggled loose a time or two. other than that, its been better than any mounts ive tried to hack together for it.
TL;DR good mount, bit pricey
I bought this car mount a few weeks ago and have been very impressed with it, even in my old suzuki 4x4 which rattles like a can there is no vibration with the mount.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=380292361164#ht_3536wt_1158
However, I have just noticed where the clip hooks the phone at the top, there is that much tension in it, well it has started to lift the top part of the phone away
So I'm going to try heating it up a bit and pulling the tab back a bit so it reduces the tension.
Something for others to watch out for!
Cheers
Todd
For those that have a defender case and want a car mount there are Rocketfish and Bracketron mounts that have the same attachment.
Google shopping results - for rocketfish
Google Results - for Bracketron mounts
These will work with the Dell car mount bracket or the clip on the Defender case.
Interesting feed back Todd, thanks. I was just about to order on.
Hopefully you can answer a question for me then. I was looking at getting one with the belt clip as well, Would the holder for the streak be sufficient that I could just get the one holder and swap this to the belt clip and then back to the windscreen holder? or would I need two holders and swap the Streak between the 2?
Thanks in advance.
Stuart
Can't really answer your question on that Stuart as I do not have a belt clip as well.
If it helps I can take a photo of the holder if you like.
I've got one of these and have not had the same issue.
I've been using mine for about 6 months now and the phone is still perfect?....
Lucky you
I'm not saying it's a bad mount, far from it, the post was just to make folk aware of a potential issue.
Ta
Todd
Nope, that's fine
Just reread my post and it makes it sound like I don't believe
Anyway, mines fine, seems like you had an issue with an over zealous clip.
Although we've only commented on 2, so that's 50% are good and 50% are bad!
i have the same mount for car and also have a belt clip....
These are the two best accessories that i purchased for my phone...
Hi, I have this one called Clingo I bought from ebay.
That is very nice, you can put any phone on that, I'am courier ran about 300 miles day, diesel car, my van vibrate a lot and the phone still there hehe.
I cannot put external links yet, but search for clingo on ebay, that's a good one.
Fabio.
Hey everyone,
I noticed my phone is held securely with the Garmin windshield mount and the Otterbox case.
If you have one laying around it wouldn't hurt to see if it fits.
Which Garmin unit do you have? I have been waiting a long time to find a car mount that worked with the Otterbox case.
I'm not sure which unit I have, but it's the standard mount they have for like $20.
Looks like this.
http://www.google.com/products/catalog?rlz=1C1ECDB_enUS466US466&q=garmin+windshield+mount&um=1&ie=UTF-8&tbm=shop&cid=11532997595646170789&sa=X&ei=yrkMT4__LoGi2gXd1I3oBw&ved=0CH0Q8wIwAQ
Have any of you found a good mount for our mountain bikes? I saw a few on amazon, but I thought I'd check here first. What I'm looking to do is have AllTrails running infront of me while riding.
I haven't found anything that I really like. I'm using a NiteIze strap by the stem for now, but the 5X with a case is pushing it's stretching capabilities. I was thinking about trying the quadlock but I don't think I will like the extra bulk added by the lock. I've seen that some guys use the Ram X mount on their motorcycles but I'ts kind of bulky It doesn't feel secure enough to me if you aren't riding smoothly. I've just kept it in my car and not on my dualsport/dirtbike or my mountain bike.