Serious Buckle Wear - Samsung Gear 2 Neo

I've had my Gear 2 Neo for 22 days now. Today, I noticed for the first time more than just scuffing. I'll let a picture do some better explaining...
I haven't been doing anything extreme, just working at my desk in my office. There is some significant metal transfer onto the surface of the desk. I had no idea it would get this bad.
What do you guys think? Is this something I could get covered under warranty?
Does anyone else have this problem?

BigDanInTX said:
I've had my Gear 2 Neo for 22 days now. Today, I noticed for the first time more than just scuffing. I'll let a picture do some better explaining...
I haven't been doing anything extreme, just working at my desk in my office. There is some significant metal transfer onto the surface of the desk. I had no idea it would get this bad.
What do you guys think? Is this something I could get covered under warranty?
Does anyone else have this problem?
Click to expand...
Click to collapse
Wow thats bad, wish i left the plastic packing wrap on mine, but so far nothing like yours

obsydian said:
Wow thats bad, wish i left the plastic packing wrap on mine, but so far nothing like yours
Click to expand...
Click to collapse
I tried to leave the packing on my Gear 2 but it peeled itself off within the first hour of wearing it.

That's pretty bad IMO, especially for just desk work. What type of desk? I didn't leave my original watchband on very long, since I thought it looked pretty cheesy. I bought a 22mm $20 leather watch band online and it looks and feels much better than the rubber strap that comes with it.

I would try and get it replaced under warranty but i guess they will tell you its your own fault etc..
If you still want the rubber straps, i would suggest, buy new ones on ebay and then get the cheapest `copter` displayfilm you can find and cut it to fit the buckle, should not have any more scuffing like that.
I too have a deskjob and i have nothing near the scuffing you have. Last week i got my carbon look skin from Skinomi and it came with a sticker for the buckle, atleast it will save me from some wear and tear onbthe buckle.
Sent from Galaxy no. N5120 via the LTE-network

my buckle came apart on my gear 2 neo cant figure out if there were screws in these holes or how it was held together , also I cant seem to locate original straps on eBay.

Related

Swiss Mobility Legion Smartphone Case for Xperia X1

I'm interested in the above mentioned case from Swiss Mobility. Anyone here with experiences to share with this case (used together with X1)? I can't find a distributor in Europe - anyone knows where to buy it in Europe? (I know BestBuy has them, but the nearest store is 6000 miles away and shipping is twice the cost of the case). Swiss Mobility's web site hasn't worked for some time. Anyone knows what's up with that?
http://www.xperiadepot.com/swiss-mobility-legion-smartphone-case/4A80A3757.htm
They ship to Europe with courier service (3-5 days) for 25 usd. same price for the case so I suppose its worth it if you want to order together a couple more accessories.
currently unavailable
Looks great, too bad it's unavailable!
They are probably unavailable because Swiss Mobility went under the radar.
How exactly are carrying cases worn?
I've seen people wear carrying cases only a scarce amount of times, and I totally forgot how people manage to wear these.
I have a carrying case for my phone (not the Xperia), and it is so bulky! It's for the Samsung SCH-i760 btw. Anyways, so this is how I wear it: I basically use the "clip" to clip onto my belt, but I notice it is so bulky.
So when I usually wear shirts that cover almost pass the fly/zipper of my pants. And when I try to pull my shirt down to cover my pant, it covers the damn thing, and it looks like I got big tumor on the right or left side of my stomach.
So then I clip it on my pocket, it looks better, but now the pong hangs more loosely. It's kinda funny how these carrying cases rarely have a model for them to wear the carrying case, this is because companies know that it's freaking ugly to carry these things, ugly = no sales.
So if I am doing it all wrong, and if I am wrong that it's freaking ugly, then tell me this: what is the proper method of wearing these damn things?
poetryrocksalot said:
How exactly are carrying cases worn?
I've seen people wear carrying cases only a scarce amount of times, and I totally forgot how people manage to wear these.
I have a carrying case for my phone (not the Xperia), and it is so bulky! It's for the Samsung SCH-i760 btw. Anyways, so this is how I wear it: I basically use the "clip" to clip onto my belt, but I notice it is so bulky.
So when I usually wear shirts that cover almost pass the fly/zipper of my pants. And when I try to pull my shirt down to cover my pant, it covers the damn thing, and it looks like I got big tumor on the right or left side of my stomach.
So then I clip it on my pocket, it looks better, but now the pong hangs more loosely. It's kinda funny how these carrying cases rarely have a model for them to wear the carrying case, this is because companies know that it's freaking ugly to carry these things, ugly = no sales.
So if I am doing it all wrong, and if I am wrong that it's freaking ugly, then tell me this: what is the proper method of wearing these damn things?
Click to expand...
Click to collapse
Tuck your shirt in.
beware magnets
that swiss case uses a magnet, when i had a case that used magnets i found that when i got a call the phone would wake up and as the phone passed by the magnet when getting it out it would think that the slide had been activated and rotate . by the time this happened i could not answer the call in time and it went to messaging.
This may have been more of an issue with some of the earlier roms that I was using that were quite slow to rotate.
you might be able to work round this depending on the strength of the magnet and/or what orientation you put the phone in the case.
I bought a case that is secured by velcro to avoid this problem, however a couple of months later the velcro has worn out and does not stay closed. I may get my old magnet case out again and see if the new faster roms are better at coping.
i want get this case so long already where i can get it?

myTouch Skin It Offer

Has anyone here ordered or used they're skin it offer when you guys received your myTouch?
or has anyone used skin it before and what did you guys think of it?
i have one on my g1, and just ordered a custom one for my MyTouch 3G.... I like them. they are very durable, easy to put on, and fit under the snap on clear cases i use. the stretch to go around bent corners and such, to stay smooth with no bubbles or wrinkles.
crxtasi said:
Has anyone here ordered or used they're skin it offer when you guys received your myTouch?
or has anyone used skin it before and what did you guys think of it?
Click to expand...
Click to collapse
Personally, I wouldn't order a skin (hate the way the peel up), but I would order one of the custom shells. Know a girl that just got one a couple days ago and it's damn near melted on. . . it's not going anywhere. lol
I have a gel skin (case) from T-Mobile on my HTC Magic and it's alright. It doesn't fit as snug as I would like and it's a dust/lint magnet. Perhaps, that is the case with all gel skins though. Finally, the hole at the bottom covers up the microphone hole on the phone but ppl still hear me ok, so it doesn't seem to be a problem.
Overall, it does the job of protecting the phone.
It's not realy a skin. they actually print the image on a battery cover. Overall it's not bad. The image you use will have a lot to do with the quality of the printing. If you use the 25% off code it comes to about 17 bucks and change with shiping. For the price I am happy with mine. I am going to order another as soon as payday rolls around.
I ordered one but it was a custom image. It looked great online but terrible when I got it. They were extremely fast in replacing it but the second one looked really bad as well. The image quality was good but it doesn't really cover most of the phone so you have all these white spots where there is no coverage.
So they gave me a shell. This was much better but the image quality isn't that good.
All and all they were extremely nice and fast.
So the shell is actually another back plate printed with your design? I hope I read that right, because I have a crack in my back plate near where the camera is and it makes me nuts, I ordered my shell last week, now im just waiting....

Beware of the body glove case with kickstand from tmobile

Hi i just wanted to warn everyone about the clear body glove case that the t-mobile store carries for the HD2 i spent 30 dollars on this damn thing and the kick stand is leaving chips on my battery cover i have not contacted body glove or t-mobile about this i will trust me and i will post the status on thread just a concerned HD2 owner and wanted to let everyone know b4 they get screwed
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
infrared_guy said:
Hi i just wanted to warn everyone about the clear body glove case that the t-mobile store carries for the HD2 i spent 30 dollars on this damn thing and the kick stand is leaving chips on my battery cover i have not contacted body glove or t-mobile about this i will trust me and i will post the status on thread just a concerned HD2 owner and wanted to let everyone know b4 they get screwed
Click to expand...
Click to collapse
I have this case. first of all I paid $22 for it and second, i didnt notice anything you mentioned on my phone...can you upload pics to show us?
Meh...I too have this case and none of the chipping. Pics would be great if you could.
you got ripped off. It's 20 bux
i want this case. how is the belt clip on it? does it work good? did you get it at your local tmobile store?
I don't own one of these cases, but I'd suggest you take a look at the two "knobs" that appear to be contacting the back of your case, and see if they either have sharp edges that are scratching or some type of glue/epoxy that might be reacting with and chipping your phone. As the battery door appears to be metallic in composition, your problem might be due to some type of chemical reaction.
Nah, it's definitely from the stand. I have that same case and I'm glad I clicked on this thread. Mine hasn't gotten there yet, but after reading this I noticed a tiny bit of rubbing. I'm gonna put a piece of tape over it. Thanks for the heads up.
No Problem
like i said i love this case we will see what body glove has to say tommrow and and btw i looked at my recipt and forgot that i bought somtimg else when i got it it was only 20 dollars sorry for the foul up
I bought this case before and from taking off a couple of times i now how scratches on the sides of my battery cover now... Stopped using this case after couple of days
Bought this case on launch day with the phone and dont have any damage from using the case.
Got a New Cover
Ok so after many customer service agents and long hold times i called body glove first then they gave me a number to call corporate after pretty much blowing me off asking for recipets they said they would send a claim form in the mail like any uses that anymore then i called t-mobile customer service which i do love because the people are so friendly and helpful they gave me the number to HTC which i called and got sent all over the place there (i still cant figure out why i had to call HTC about a body glove case that T-MO sold??) then i got tired of all of the running around and went to a local t-mo store the girl changed out my battery cover for a new one great i am so happy about that but what about the body case i asked she says if you do not have the recipet there's nothing i can do so i then asked just to trade it out and again no recipet no trade fine i said thank you and was very polite because she took care of my phone which is all i care about so the conclusion i have a good battery back but not new case guess ill just have to stick with that crappy rubber case that came with it till i can get my phone skinned over all im happy...
Please spread those periods of ellipsis throughout your post next time...jesus that was hard to read!
Thanks for providing your experience with this case. I was thinking of getting this one but after seeing this gonna have to think twice about it. So which case would be the most efficient?
efjay said:
Bought this case on launch day with the phone and dont have any damage from using the case.
Click to expand...
Click to collapse
Same here.
I thought it didn't scratch my phone either until about 2 days ago. The scratch is TINY but noticeable when looking for it.
But then again it seems it couldn't have been the case because its about 1/4 inch on top of the E in the SENSE part.
Doesn't bother me though since it's always in the case. If I get bored I'll polish it one day...
jota164 said:
I thought it didn't scratch my phone either until about 2 days ago. The scratch is TINY but noticeable when looking for it.
But then again it seems it couldn't have been the case because its about 1/4 inch on top of the E in the SENSE part.
Doesn't bother me though since it's always in the case. If I get bored I'll polish it one day...
Click to expand...
Click to collapse
so your saying you will pay to damage your phone? Please give me an address and ill list my price to damage your phone and i'll put it in a case for you also
my wife and i both have this case, all good on our front. no scratches or such.
Just like everyone else,
I bought this case with the phone and never had a problem like you described. I rather like this case if only I didn't have to take it off every time I had to pull battery.
i bought this case from day one and not a single issue with it. I love it and if it wasn't for this case i would have a cracked screen on it(again). the one day i let my spouse use it to try it out was the day the phone fell and the screen cracked. I have dropped it from higher ground with the body glove case and phone was untouched but yet the day i don't have the case i drop it from knee high bench and screen cracks. wow. i trust and love this case. sorry to hear you guys are having this problem.
I have the EXACT same problem... I'm glad you went ahead and showed everyone. My problem is that I have 2 of the same case.... and I'm not in US for the next 3 months. So I figured I need to glue some sort of foam at the kickstand so it doesn't do it.

lanyard cases?

yeah, yeah, i know the whole "why do you need a lanyard"
i don't was just curious if they exsisted.
Doubt they mass produce any but My daughter made me one a while ago in school. Fit pretty good while it lasted. It Was cool for a minute. Used it till it feel apart. Was much happier with the key chain she made me last week.
Sent from my 2.3.5 Incredible Obsession
Kiboe said:
yeah, yeah, i know the whole "why do you need a lanyard"
i don't was just curious if they exsisted.
Click to expand...
Click to collapse
the incredible has a spot for one on the bottom plus the wii strap works. the seidio surface case has an opening for it too.
synisterwolf said:
the incredible has a spot for one on the bottom plus the wii strap works. the seidio surface case has an opening for it too.
Click to expand...
Click to collapse
Well, I'll be damned....I've had the phone for more than a year - this is news to me. Thanks!!
Actually almost every case I have seen has a hole for this. I didn't even realize it existed until a couple of months ago, but even the cheap case I had for about 2 weeks had a hole for it.
That lanyard hole is microscopic on my Dinc. How would you ever thread a lanyard through?
I've had mine over a year too and I could of swore that was a noise canceling microphone. Anyway, easiest way to attach one looks like you take off the battery cover, thread the small part of the lanyard/wrist strap through the battery cover ( or through your case first ) then put the loop around the little hook.

Received my Moko 360 Case (Pics Included)

Here's the case:
http://www.amazon.com/gp/product/B007S9ZSGW/ref=oh_details_o06_s00_i00
It has all of the correct cutouts. I also like that the speaker cutout is open, as opposed to a bunch of holes like I've seen in other cases. It does add some bulk due to the fact that it can rotate 360 degrees, but it not enough that I can't slip it in my rear pant pockets. It has a loop for the stylus, as well as the magnet wake/lock. It also doesn't have the flaw that other cases have where it locks the tablet when you fold the cover back against itself. I like the white stitching and the fact that it doesn't cover the bezel, which is a deal breaker for me, since covered bezels tend to hinder you when navigating the UI. It also has deep grooves so that it doesn't slip when you have it propped open. Also, when in Portrait mode, you can only use it on the last groove. Any of the other 2 grooves can't support it. When it is on the last groove, I can use it without feeling like it's going to fall back, so it's supported very well in that aspect.
This is the same case that I have for my Blackberry Playbook, and on that back of the Playbook, it has the Blackberry Logo, which you can see through that open hole in the back so it looks nice. On the Nexus, there's no logo or anything on the back that shows through the hole, so I wish that it was covered for the Nexus version. Another small gripe would be the location of the Stylus loop.....if you have the case open and you have a stylus in it, the tab will be at a slight angle. I tested it and it doesn't take away from the sturdiness of it, just a small observation.
All in all, I'm happy with it so far. The seller refunded me the money since I was supposed to receive it last week and it got lost misplaced somewhere in shipping and ended up getting routed to Cali first before coming here, so I give him props for great customer service.
Nice review! The case looks better than I had imagined.
I got the same case delivered on Saturday. Works well. Feel a lot safer carrying it around to and from work now.
I may get the slim fit version as well at some point so it isn't quite as thick, but it does feel solid in this thing.
I notice you have a skin on the back of your nexus. Does it get in the way with the case at all, and if you pull the tab out of the case, has it mangled the skin at all on any pressure points?
I have a skin as well but am reluctant to put it on for this reason, and being that the back is rubberized i dont feel like it really needs it in the first place.
Thanks for the review. Really wish they had more color choices! I want a case that sits portrait (I read a lot) & landscape (Netflix). I already have a case for now, but I'm looking to replace it with one that does everything I want... like this one! I'll wait it out a bit & see if they come out with more colors.
regalpimpin said:
I got the same case delivered on Saturday. Works well. Feel a lot safer carrying it around to and from work now.
I may get the slim fit version as well at some point so it isn't quite as thick, but it does feel solid in this thing.
I notice you have a skin on the back of your nexus. Does it get in the way with the case at all, and if you pull the tab out of the case, has it mangled the skin at all on any pressure points?
I have a skin as well but am reluctant to put it on for this reason, and being that the back is rubberized i dont feel like it really needs it in the first place.
Click to expand...
Click to collapse
Yes, I have an XtremeGuard body protector on it and it doesn't get in the way. I've taken it out of the case a few times and the protector's not bunching up. The protector's been on the Nex7 for over a week, so it's cured pretty well. I wouldn't try it on a fresh protector install. I'd give it about a week so that it sets right before putting it in a case like this.
Prey521 said:
Here's the case:
http://www.amazon.com/gp/product/B007S9ZSGW/ref=oh_details_o06_s00_i00
It has all of the correct cutouts. I also like that the speaker cutout is open, as opposed to a bunch of holes like I've seen in other cases. It does add some bulk due to the fact that it can rotate 360 degrees, but it not enough that I can't slip it in my rear pant pockets. It has a loop for the stylus, as well as the magnet wake/lock. It also doesn't have the flaw that other cases have where it locks the tablet when you fold the cover back against itself. I like the white stitching and the fact that it doesn't cover the bezel, which is a deal breaker for me, since covered bezels tend to hinder you when navigating the UI. It also has deep grooves so that it doesn't slip when you have it propped open. Also, when in Portrait mode, you can only use it on the last groove. Any of the other 2 grooves can't support it. When it is on the last groove, I can use it without feeling like it's going to fall back, so it's supported very well in that aspect.
This is the same case that I have for my Blackberry Playbook, and on that back of the Playbook, it has the Blackberry Logo, which you can see through that open hole in the back so it looks nice. On the Nexus, there's no logo or anything on the back that shows through the hole, so I wish that it was covered for the Nexus version. Another small gripe would be the location of the Stylus loop.....if you have the case open and you have a stylus in it, the tab will be at a slight angle. I tested it and it doesn't take away from the sturdiness of it, just a small observation.
All in all, I'm happy with it so far. The seller refunded me the money since I was supposed to receive it last week and it got lost misplaced somewhere in shipping and ended up getting routed to Cali first before coming here, so I give him props for great customer service.
Click to expand...
Click to collapse
Picture #3, how did you get traffic webcam as widget? Seems useful.
taC nayN said:
Picture #3, how did you get traffic webcam as widget? Seems useful.
Click to expand...
Click to collapse
Ah, that's not a traffic cam widget....that my News360 App widget and the headline was for an overturned truck on a highway near my house lol
LovelyLush said:
Thanks for the review. Really wish they had more color choices! I want a case that sits portrait (I read a lot) & landscape (Netflix). I already have a case for now, but I'm looking to replace it with one that does everything I want... like this one! I'll wait it out a bit & see if they come out with more colors.
Click to expand...
Click to collapse
I'm OK with the black case.....never been a fan of colorful cases. If I had to pick 1 other color, it would probably be like a dark blue.....nothing girly LOL
Nce review ty, I like the case seems decent for protection...even tho a tad thick. I think I well get this one even so based on the review plus I like the look.
Nice right up. Off subject what ROM are you running?
superman.namrepus said:
Nice right up. Off subject what ROM are you running?
Click to expand...
Click to collapse
Modaco JR6 with the Motley Kernel....runs like gangbusters!!
Prey521 said:
Modaco JR6 with the Motley Kernel....runs like gangbusters!!
Click to expand...
Click to collapse
Haha, that was going to be my question
Metalor696 said:
Haha, that was going to be my question
Click to expand...
Click to collapse
I have switched in the last few weeks to the Paranoid Android ROM with the Trinity Kernel. It runs great.
Thought about this case as well, but went with the official travel case.
Bought this case because of your review. It's exactly what I was looking for. Thanks.
Sent from my Google Nexus 7 using Tapatalk 2
I have a similar one bought off ebay. I'm happy with it. The only downside of that case is the circular bit at the back where it rotates.It can potentially scratch the back of the Nexus 7 so I have put a clear protective plastic on the back of the N7.

Categories

Resources